| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Id1078b14a805eea53d2a7c5a8183a5413f26e115
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71521
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Marasov, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Add
DmaProperty to the ISH _DSD on Marasov.
TEST=Kernel marks ISH (PCI device 12.0) as untrusted, and changes the
IOMMU group type to "DMA". Also, device still goes to S0i3.
Before:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
0
After:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
1
Change-Id: I4b65b8909c41b06852fe7771375029bd2e76e111
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71263
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For marasov, the ISH main firmware will be included in the CSE region in
flash instead of loading it from rootfs. So remove the ISH
firmware-name.
TEST=Boot to OS on Marasov UFS SKUs. Check ISH firmware is not
loaded by kernel, and device still goes to S0i3.
Change-Id: I278e5d403ef9515e538a527f43949e505d750bb1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71261
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
|
|
Replace `Divide (a, b, c, d)` with these instructions:
c = a % b
d = a / b
Change-Id: I44366be5b5145a5d19f85df7a2f338866cb9c8b0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Replace `Not (a, b)` with `b = ~a`.
Change-Id: I0f18119c8e91222e59a56b8509f12c6ece6d04ce
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71514
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DPTF functionality for Meteor Lake Rex board.
BUG=b:262498724
TEST=Booted to OS and verified DPTF entries in ACPI SSDT on Rex board.
Change-Id: I87b2d71650be9ce940d9452bf4a76d4cd1ddba52
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70884
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct DDR4 SPDs from H5AG36EXNDX019 to H5AG36EXNDX017.
DRAM Part Name ID to assign
H5AG36EXNDX017 0 (0000)
BUG=b:236739240
BRANCH=Volteer
TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: If248714088835eb5dd48fa12223c273199297228
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71160
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kano didn't use SSFC in mass production, however
Zydron needs SSFC for 2rd source mipi instead of fw_config.
BUG=b:262939431
TEST=Boot to OS and check functional with ov2740/hi556 camera.
Change-Id: Idb2a35d67af0b5a7dedc66b0f7eccd8a3b4612d1
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
BUG=b:263413949
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I453fe8e1f4b4b8d4730ade259899d76aec949a44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71231
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
BUG=b:263412235
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia444cc8e3666fe15479ece81d068f9e8f1d339ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71228
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I04176fee373e534d42c72506df73a092ad55e65b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
WIFI_SAR_CBFS_DEFAULT_FILENAME is not exist, so return the non-exist
id has the same outcome.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib34e6b4f435880d62936ae54f19ba2ec752eced2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
WIFI_SAR_CBFS_DEFAULT_FILENAME is not exist, so return the non-exist
id has the same outcome.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib7a764d8cc3160c26abad9c1757812b955bef066
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Use get_wifi_sar_fw_config_filename to remove the duplicate code.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ifde714c19f7ab9fe08f870060037db190a80dbd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens/digitizers.
This removes non-present devices from the SSDT and relieves the OS of
the burden of probing.
BUG=b:121309055
TEST=build/boot Windows/linux on all poppy variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I4c1d8ae8c41c1f4283718a86fccbf5ae4fc399b6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70921
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: Iee01dac943b6c2955f7af42ce0e9395fc609682f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70920
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For touchscreens/digitizers on poppy variants, drive the enable
GPIO high and hold in reset in romstage, then release from reset in
ramstage. This will allow coreboot to detect the presence of i2c
touchscreens/digitizers during ACPI SSDT generation (enabled in a
subsequent commit).
TEST=tested with the rest of patch train
Change-Id: I90ac4f09c343a28328f7d30254f0448cbe0c78b3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Due to a high I2C bus load on the mainboard I2C frequency of 400 kHz
leads to poor signaling. Therefore limit the I2C speed to 100 kHz for
this bus. In addition, add a generic I2C device with 100 kHz bus speed
to the devicetree so that the OS will not switch to higher clock rates,
too.
Test= Measure the I2C signals at coreboot and OS runtime and ensure the
clock is always at 100 kHz.
Change-Id: I6b0a642cd3f5b77331663ac8c76ed0a116ae77ca
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71227
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add an option for SD card initialization.
2. If CONFIG SDCARD_INIT is configured, pass SD card detect GPIO to
payloads for SD card detection and initialize MSDC for SD card
configuration.
BUG=b:244250437
TEST=build pass
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Change-Id: I2d3683eb673f438c9190c11d4679a3ca97c76a98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71136
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Replace `And (a, b)` with `a & b`.
Change-Id: Id8bbd1a477e6286bbcb5fa31afd1c7a860b1c7dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70851
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `And (a, b, c)` with `c = a & b`, respectively `c &= b` where
possible.
Change-Id: Ie558f9d0b597c56ca3b31498edb68de8877d3a2f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70850
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Or (a, b, c)` with `c = a | b`, respectively `c |= b` where
possible.
Change-Id: Icf194b248075f290de90fb4bc4e9a0cd9d76ec61
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70846
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftLeft (a, b)` with `a << b`.
Change-Id: I812b1ed9dcf3a5749b39a9beb9f870258ad6a0de
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70842
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftLeft (a, b, c)` with `c = a << b`.
Change-Id: Ibd25a05f49f79e80592482a1b0532334f727af58
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70841
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `ShiftRight (a, b, c)` with `c = a >> b`. One case was
simplified to just `a >> b`.
Change-Id: I889012b0a3067138e6f02d3fe8e97151effb5c2a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70840
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Only IO trap #3 for lenovo/x60,t60 and getac/p470 have implemented
the IO trap handler.
Change-Id: Ibadce174f673e88380f4b6745fd9ed8b73177a13
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70367
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The touchscreen reset GPIO is configured as PAD_CFG_TERM_GPO with an
internal pull-down, which puts it in a state of contention when the
reset pin is released / set to high. Fix this by changing the reset
GPIO to PAD_CFG_GPO like all other poppy variants use for the
touchscreen reset.
TEST=build/boot nocturne, touchscreen still works.
Change-Id: I1ad4bb9d4194485990f54ffa7bae05f5c9a39deb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71185
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Test: build/boot google/sarien with non-ChromeOS build, edk2 payload.
Linux 5.15, Windows 11 tested.
Change-Id: Ibc1857e6b120b0bb827ed610981c4d2bf8f78d1f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple hatch variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I2eae486eaa5e42cfe42ecc066a58b09fe2bd9138
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71062
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I580348d0aabb24f0241d6e9992c5a17942bd57ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some ELAN touchscreens were missing the entries for the enable GPIO
and associated delays. Add them to variants with ELAN0001 touchscreens
missing the entries.
TEST=tested with rest of patch train
Change-Id: I9ce81ad6ee8183c522d05fbe3f57af87e5895df3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
For touchscreens on hatch variants, drive the enable GPIO high starting
in romstage, then disable the reset GPIO in ramstage. This will allow
coreboot to detect the presence of i2c touchscreens during ACPI SSDT
generation (implemented in a subsequent commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I86c5f41b7820eaf5252c276ae854a4206e09385f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71059
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: I1939387b5bb98d6d282fd044e9ce8780dbe0d2c5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
With xDCI enabled, the right USB-C port does not work for USB data.
Additionally, it was disabled in stock ChromeOS firmware.
TEST=build/boot rammus, confirm right USB-C port works for booting,
under OS in Windows/Linux.
Change-Id: Ie343577d772563fa7d432b62aa8faa41d760102a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on berknip/morphius, verify all
touchpad functions work correctly.
Change-Id: I9d8362719ddbfe523dd83964556b05bb8f1bb1ba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on lindar, verify all touchpad
functions work correctly.
Change-Id: If2deedbd572b771c1e7793a3b3c37a3114aa2a48
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on coral, verify all touchpad
functions work correctly.
Change-Id: I161eb953bf8bceb353cf43803ee948c522928892
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on nami, verify all touchpad
functions work correctly.
Change-Id: I0611da8bbea41565e603a1a1b7cc20226ba21c62
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on bobba, verify all touchpad
functions work correctly.
Change-Id: I4fd66be21eeff5f37b58a8922c49683a28685064
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on liara, verify all touchpad
functions work correctly.
Change-Id: I89ca02629803882e7ed2048a5a26868fc2de41a9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on akemi/kohaku, verify all touchpad
functions work correctly.
Change-Id: Icb552caa69428908e5e3342139b578a145fa2797
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot ChromeOS, Linux 5.1x, Windows 10 on dewatt, verify all
touchpad functions work correctly.
Change-Id: I00efde6f007d57166cd82f76d2f389dedce57466
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=boot Linux 5.1x, Windows 10 on drawcia, verify all touchpad
functions work correctly.
Change-Id: I43eb5bc394a3fbfd4109f2e6c274ec66fc01d46d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The currently assigned ACPI HID 'PNP0C50' is not a valid per Windows
WHQL validation tests. To ensure compatibility with both Windows and
Linux, set the HID to 'SYNA0000' and CID to 'ACPI0C50' as previously
done for other boards (eg, google/lulu).
TEST=untested on brya, but tested under Windows/Linux on all other
boards in the tree using Synaptics touchpads.
Change-Id: Ia9351185b918f2d6f2d2be110b88e8310d37a03f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Audio codec RT1011_ALC5682I_I2S is listed as a fw_config option in the
baseboard, but missing from the HDA device probe list in the variant
overridetrees, preventing it from being detected at boot.
TEST=build/boot lindar, verify audio codec identified and HDA device not
disabled by fw_config.
Change-Id: Ib40b095688aac5cf4e0a60dcac250023c4f04c9f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple reef variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I8c90074515b1c7d3ab742768d7bbd904fec256d4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71154
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I1000df10eea5670bf1bc8d04c736150b6a5e26a1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For touchscreens on reef variants, drive the enable GPIO high starting
in romstage, then disable the reset GPIO in ramstage. This will allow
coreboot to detect the presence of i2c touchscreens during ACPI SSDT
generation (implemented in a subsequent commit). As the GPIOs are
already correct in ramstage, only the romstage ones need to be set.
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: I10d1789c8de23653bac81e1f9604a47f93fa3f7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71152
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Id3ab412183e5c5d534b2e1dea3222c729c25118b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that power sequencing has been implemented, switch from using ACPI
"probed" flag to "detect" flag for all i2c touchscreens. This removes
non-present devices from the SSDT and relieves the OS of the burden of
probing.
BUG=b:121309055
TEST=build/boot Windows/linux on multiple volteer variants, verify all
touchscreens functional in OS, dump ACPI and verify only i2c devices
actually present on the board have entries in the SSDT.
Change-Id: I0448d12a36f522b715e1fbeb8d37eb5a925ebc93
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71183
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I269361f90a838d7766ad429afe82ef885f0d9371
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71182
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For touchscreens on volteer variants, drive the enable GPIO high
starting in romstage, then disable the reset GPIO in ramstage. This will
allow coreboot to detect the presence of i2c touchscreens during ACPI
SSDT generation (implemented in a subsequent commit).
BUG=b:121309055
TEST=tested with rest of patch train
Change-Id: Ie4c3b94594253ced6a875af78e6390cda8dcbc7d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71181
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: Ib3c2a0e849006b7bf70cbd0bf6f32aa01ccf1bc4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71180
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the UART port but only enable UART debug for EDK2
debug builds.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I54e1dc5768fd765254c7ede91eaa45842fed3bd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69322
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Different PCHs have different definitions for registers. Here create
a lbg folder and move lbg specific codes to this folder so that we
can add new PCH code under xeon_sp folder.
* Create lbg folder and move lbg specific codes from pch.c to soc_pch.c
under lbg folder.
* Rename lewisburg_pch_gpio_defs.h to gpio_soc_defs.h and move to lbg
folder.
* Rename gpio.c to soc_gpio.c and move to lbg folder.
* Move pcr_ids.h to lbg folder.
* Move lbg specific codes from pmutil.c to soc_pmutil.c under lbg
folder.
* Create and revise makefile for files under lbg folder.
TEST=Can boot into OS on OCP Delta Lake.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I06555ed6612c632ea2ce1938d81781cd9348017a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
add dptc power parameter for tablet mode
sustained_power_limit_mW_tablet : 12w
BUG=b:257187831
BRANCH=none
TEST= validate the parameter changes for each mode by AGT
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I22d3f9c79a1eaaccfbef3766019516edb3523964
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70674
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
Extend sd_hold to meet touchpad/touchscreen SPEC.
touchscreen:
tHD > 0.2 us
touchpad:
0.3 us < tHD < 0.9 us
After applied the change, the tHD meets reqirement.
touchscreen:
0.056 us -> 0.28 us
touchpad:
0.056 us -> 0.384 us
BUG=b:263340540
TEST=build and measure the timing meet SPEC
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I172d2ec8a4b16d8005106f55a37795cc72d69e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70195
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure eMMC DLL tuning values for Pujjo board Kioxia sku.
BUG=b:261676386
TEST=Use the value to boot on Pujjo successfully.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I46991f26571771620dcd94b90e1112484ade63bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as kano is using a converged firmware image.
BUG=b:253337338
BRANCH=firmware-brya-14505.B
TEST=Cherry-pick Cq-Depends, then "FW_NAME=kano emerge-brya
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
disable hardware write protect and software write protect,
flash and boot kano in end-of-manufacturing mode to kernel.
Cq-Depend: chrome-internal:5246998, chromium:4119763
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: I30ab7d829a6cb45b4e0cd38747501ba0eb6bd6cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71175
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adapted from WIP (and now abandoned) patches CB:25334, 26308, 26309.
Update the nhlt_soc_add_*() methods for max98373, max98927, and rt5514
codecs to program the render and feedback slot numbers as appropriate.
TEST=boot Windows on google/eve, atlas, nocturne, and rammus. Verify
audio functional with both Google project campfire drivers as well as
coolstar's AVS audio drivers.
Change-Id: Ib8c6e24ba539e205bd5bbd856ecff43b2c016c2e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
|
|
Remove the PSE TSN GbE device #0 as it's unused on the board and not
visible during the PCI enumeration.
Change-Id: I4a7d0e437c4f4a12d3a07564cddeafb7c697c6d3
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70700
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Contrary to mc_ehl2, which this variant is based on, this board
doesn't contain the TI XIO2001 PCIe-to-PCI bridge, which makes the
attempts to modify the bridge's registers unnecessary.
Change-Id: I6597ceb78e4c790c08a0dfa9535dece33a8f95b8
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70854
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch from using ACPI "probed" flag to "detect" flag for all i2c
touchscreens and digitizers. This removes non-present devices from the
SSDT and relieves the OS of the burden of probing.
Test: build/boot Windows/Linux on various octopus variants, verify
touchscreens/digitizers functional, dump ACPI tables and verify only i2c
devices actually present on the board have entries in the SSDT.
Change-Id: I67c5bbae42e96ae21d37309e382b635321e6ef01
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63214
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I13bc6920a0dfaf769091b1764a7584902d1f85d6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63213
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For octopus variants with a touchscreen/digitizer, drive the enable and
reset GPIOs high in romstage, then disable the reset GPIOs in ramstage.
Where available, only set the GPIOs for SKUs which have a touchscreen.
This will allow coreboot to detect the presence of i2c touchscreens
during ACPI SSDT generation (implemented in a subsequent commit).
TEST=tested with rest of patch train
Change-Id: Ia725b4054069c0a4f60afd7e0bca6e2fd5fdcbba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63212
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: I4a8e11945ae64b000051989089e0ebae22896c6b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70905
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables building ChromeOS for mtlrvp.
Patch includes,
1. Add cros_gpios for mtlrvp
2. Add chrome OS configuration in Kconfig
3. Add Chromeos.c
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train (CB: 69886)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ia428941bd8269714c3edca6c7b0c2a3fbf08bd75
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70724
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Power resource for Bluetooth device is not configured correctly in the
device tree. Fix Bluetooth devicetree configuration.
BUG=b:262785310
TEST=Build Skyrim BIOS image and boot to OS. Ensure that the DUT is able
to connect to a Bluetooth headset.
Change-Id: Id980424349537be35860dec04cc823d419cefe2f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71068
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
add dptc support for different power parameter on tablet/clamshell
mode.
BUG=b:257187831
BRANCH=none
TEST=validate the parameter change for each mode by AGT.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I96e04d113d18b42f3457056a5e4fa311ceccffb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
1.Config setting for touchpad I2C
BUG=b:261159229
TEST=On frostflow, touchpad i2c spec from EE measure
Frequencies:
1.I2C0 (Touchpad): 385.7kHz
Change-Id: I4ca72ee7fabd4b641eb17451ed8d942c5df52dde
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I07be0aa2144b7718e28f1f675978b4b4b92752ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69492
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds files required for ramstage and SMM.
1. Add file required for ramstage (mainboard.c)
2. Add smihandler.c for SMM
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I377c4ff954a900c7b5193d7cab5554c6c02573ee
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70723
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch will initialize EC for mtlrvp which includes,
1. Add configuration (& choice) for CHROME_EC and INTEL_EC (WINDOWS_EC)
2. Add respective ACPI configuration
3. Add ec.c required for ramstage
4. Program EC ranges as part of devicetree.cb
5. Enable VBOOT in Kconfig
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with
CHROME_EC using subsequent patches in the train
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I662d7f79050d35e152d97dc5c2118a4af56223bc
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66101
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `XOr (a, b, c)` with `c = a ^ b`, respectively `c ^= b` where
possible.
Change-Id: Ic5f67684bbd4ea115c4dae8a4417d88bea0d6b77
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70843
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add NHLT endpoints for octopus boards using CS42L42 codec.
Reuse method to add da7219 endpoint as the routing is identical.
TEST=boot Windows, verify audio working with coolstar's audio drivers.
Change-Id: Id68997073752f5d90b6fe21f666a6140e22d65eb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove flag in VBTs for 'Use fixed resolution at boot' to allow FSP/GOP
display init to use native panel resolution instead.
TEST=build/boot multiple google/octopus variants with edk2 payload,
verify boot logo not distorted/stretched.
Change-Id: Ia31ff28379282619dfa22a955bee1a768bb54bb8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Boot menus are too small at native 4K res on some panels, so
set fixed display resolution to 1920x1090p
TEST=build/boot KOHAKU with 4K display, verify boot menu text legible.
Change-Id: I82563c83de7ab302151f60d86b8a6824330d03ea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adjust I2C speed for codec, TPM, touchpad, touchscreen.
BUG=b:260565911
TEST=Built and verified adjusted I2C speed
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Idcec6e401992d30dff01940c50473cba48cffc19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
|
|
Based upon hardware differences from mc_ehl2, disable RP7
and enable RP3 and RP5.
Change-Id: Iecaa3098c3e4c9ce15254bb8bd1fe6da86d6e706
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70689
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new mc_ehl variant, which is based on mc_ehl2 implementation.
This patch uses a copy of mc_ehl2 with changes only in naming
as a starting point for the new mc_ehl3 variant.
Follow-up patches will introduce the functional changes against
mc_ehl3.
Change-Id: Ie8c18b4f16d88b175ce576c2ef4c2e6ee0b4c306
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Enable wifi sar function for yaviks.
Use the fw_config to separate SAR setting for different wifi card.
BUG=259199095
TEST=build, enabled iwlwifi debug, and check dmesg
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I3ced65368ee66e084e58d66cff8f75147f665d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Update SX9324 RegProxCtrl0 register settings based on tunning value
from P-sensor vendor.
BUG=b:242662878
TEST=i2cdump -y -f 13 0x28 on Pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: If471a6fee5a3daeac1958709415b2d5e1329b81b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_202209`:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/starbook-specification
Signed-off-by: Ben-StarLabs <ben@starlabs.systems>
Change-Id: Idc0c265a88b19cf9e89cc8ab3e8db9abd8cf8409
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65785
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This will help to integrate RO SPL table in RO partitions such that it
is used before PSP verstage is loaded. After PSP verstage, SPL table in
RW partition gets used.
BUG=b:243470283
TEST=Build Skyrim BIOS image and boot to OS.
Change-Id: Ic2061f66381d7e9a8018e6f28aa0bc2ca6010f6f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70777
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support an RPL SKU on lisbon, lisbon must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for lisbon so that it will use the RPL
FSP headers for lisbon.
BUG=b:246657849
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=lisbon emerge-brask intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
flash and boot lisbon to kernel.
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Change-Id: Ie60c357ef0a2af2fec90df4a54e56f51ceb927d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Id5a73126737a3abbe6f0ef37276ce20f687b47fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70236
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Disable unused PCIE8 for fix system can not enter S0ix completely.
BUG=b:261915226
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I06f8bd06e1fe92c03bd5625a41469830ce37a11c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70660
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Rename the MIPI PWM control GPIO to be consistent with the schematic.
BUG=b:244208960
TEST=test firmware display pass for eDP and MIPI panels on MT8188 EVB
Change-Id: I6a3368d438cb50b257992260d1388f0b7e0f5ace
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70822
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are two ways to control backlight in geralt:
1. MIPI/eDP panel => control backlight via the GPIOs.
(`backlight chip enable` and `PWM dimming control`)
2. eDP OLED panel => enable backlight via `backlight chip enable` and
control dimming over AUX.
For MIPI/eDP panels(#1), both "backlight enable" and "PWM control" GPIOs
will be passed from coreboot. For eDP OLED panel(#2), only the
"backlight enable" GPIO will be passed. If depthcharge successfully gets
the GPIOs, it will use them to control backlight.
BUG=b:244208960
TEST=test firmware display pass for eDP and MIPI panels on MT8188 EVB
Change-Id: I866fa219722241008e2b0d566b29edf2f6d9321f
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70744
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct touchscreen setting to make touchscreen function workable.
BUG=b:260565911
BRANCH=firmware-brya-14505.B
TEST=Built and verified touchscreen function
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ia98deae65ef0e2f501457331144b044e07431a3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch connects USB3_PCH_*_WWAN_* to USB32_2 as per Proto 1
schematics dated 12/14/2022.
TEST=Able to build Google/Rex.
Change-Id: Ie04c79ff5c231527e3d5f63a5cc553ec39c46914
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch updates the GPIO PIN name as per Proto 1 schematics dated
12/14/2022.
TEST=Not code change, just updated the comment section.
Change-Id: Ic076ab35689fd2afb7c18eff065a90b9464a6b1d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Update RAM ID table because H9JCNNNFA5MLYR-N6E is using spd-4.hex
instead of spd-9.hex.
Reserve RAM ID 3 for it, so the RAM ID table remains the same.
BUG=b:261530632
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot chromeos-bootimage
Then boot devices successfully
Change-Id: I1b683168310f74a07d246af8618b977cce32287a
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
pujjo support FM101 WWAN, add delay of FCPO# to meet warm reset toff
minimum 500ms requirement.
BUG=b:260380268
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I63e599e76bd8a15ca44717823411576fa4df1c26
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
BUG=none
TEST=Build and boot to the OS on google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2c5bac880e7dbc2ec14376c5cee3c13363bab377
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70444
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:252966799
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I175f7f39d6115d1f082575393c45734c7b02e346
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add PCIe RTD3 support for Skyrim
BUG=b:245550573
TEST=Boot/Reboot cycles and Suspend_stress_test 10 times
Signed-off-by: JasonNien <finaljason@gmail.com>
Change-Id: I7f01827613eea2f254bc42c7f5aebeeb969b163a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70740
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
With 1ms delay, reset is de-asserted too soon, before power is fully
up, causing a glitch to the reset signal. The issue is resolved with
4ms delay.
TEST=tested on dratini device and observed the issue is resolved.
BUG=b:260253945
Change-Id: I5c3edbc6ac90d5042c2d3c5b01573d4bb1ea676d
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70666
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a hook to allow a variant finalize to be called at the end of
ramstage.
BUG=b:245954151
TEST=Builds successfully
Change-Id: I00c091051e3499ca94b286d7fbe0a7a8bd38e635
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70319
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Store (a, b)` with `b = a`.
Change-Id: I349d1e7d3027097c5db4da96e2376831fff61b04
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
