| Age | Commit message (Collapse) | Author |
|---|
|
Set tcc_offset value based on the power_profile value, ranging from 5
to 15 degrees.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id30bec9c095517884a7361226aed703b370f2207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
AGESA has a lot of code in the .data section which is for initialized
data, that in fact should be .rodata. This adds the 'CONST' keyword
everywhere it is needed.
TEST: See in the .elf file (e.g. using readelf) that there is nothing in
.data section.
Change-Id: Ie8817434ee0bc6c195eabe090f195512c0043ae5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
AGESA has a lot of code in the .data section which is for initialized
data, that in fact should be .rodata. This adds the 'CONST' keyword
everywhere it is needed.
TEST: See in the .elf file (e.g. using readelf) that there is nothing in
.data section.
Change-Id: I9593c24f764319f66a64715d91175f64edf10608
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The baseboard uses port USB2 #9, and USB3 #1, but vell does not,
therefore set the port configuration to EMPTY.
Change-Id: I0d03b967fd2a051205ad5807f0bd8916bad7c036
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The PMC is accessed via sideband registers, so the PCI device is not
needed.
Disabling it solves a bug where the laptop cannot be powered on
without the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I78f4aa4567dfc154ef5cb21f8746265259cd53e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64451
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPTF is not used, so disable the corresponding PCI device.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9e4a3bada13dcabc1af3e1e5b3c215939f8239fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Remove the subsystem device ID for HDA devices, so that the correct
Intel [8086:xxxx] is used. This was an old workaround for Windows
that is no longer required with a new driver.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I63d6a4b0f19d400d683cab5dacca787d6c6a0fdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Set S3 assertion time to 28000us as this is sufficient time for
rails to discharge.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4a14e7b30bb1fc4c0c1d3ff2f75069863458487f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64447
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The USB ports use both OC0 and OC1. Whilst they work perfectly with
OC_SKIP, set them to the correct pins.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If173b443d9770083d76519b854b513d8e47b9e71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The OC pin was set to 0, which isn't connected. All USB ports are
connected to OC1.
This solves a strange issue where the Lite can't be powered on without
the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I700ddde291f0e4be6e3787e2da13f6d3ece736b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Correct empty tcss port to meet Moli's schematic design.
BUG=b:233834605
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Id16744655010e246c8ca8d1050f71a6c6c63d2a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable SaGv support for Banshee
BUG=b:233930777, b:233703655
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I22810f422e3f1d6dd1f64d93e6d7aff5593ff739
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Also, remove related code from the mainboard starlabs/laptop/tgl, since
it is obsolete now.
Change-Id: I49bbd4a776b4e6c55cb373bbf88a3ca076342e3e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Also, remove related code from the following mainboards, since it is
obsolete now.
* siemens/chili
* starlabs/laptop/cml
Change-Id: I173b87da5ce76549672c50ba30204cd77be8b82f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Moli has USBA port4 but Brask didn't use the port4,
so enable USBA port4 in moli.
BUG=b:232656163
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I5308e3102ea9f0718802596a235c0a5cc42e30bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Add WiFi SAR table for mithrax.
BUG=b:231491014
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I847debd7c817225b5b1777c798a14ef10aee3471
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
On Guybrush, the power and lid switches are managed by the EC
and coreboot and the AP have no control over them within this
context. Remove unused GPIO's to prevent coreboot warnings
about resampling at boot.
BUG=b:233771033
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I1c68fce817a2a98ce0e8f1d9771d6c630dd5e88a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The HDMI port was specified as a display port. Update to allow
for testing of 4k streaming.
BUG=b:229771029
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ib4dc8a5c6110630cea768f81e34fd7b0a5a62657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
On Skyrim, the power and lid switches are managed by the EC
and coreboot and the AP have no control over them within this
context. Remove unused GPIO's to prevent coreboot warnings
about resampling at boot.
BUG=b:233771163
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ie369bb7d430bd0dd1f1c1f41bf543a9b18e34db1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64644
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Guybrush, there wasn't a need for a sleep GPIO table.
Remove the TODO and filler table and function to reduce
unnecessary function calls/overhead. Missed changes
to variant.h in initial commit(already merged)
BUG=b:232952508
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idba1a9eeea5ea5f5922281668ec17c4f065a654d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64643
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to meet the OEM's acoustic specifications, the pre-wake
randomization time (DPA) is set to 100.
BUG=b:232892200
TEST=build FW and checked DPA value by fsp log.
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I65e3fef581ee06fa049e831f246da1328a08518c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3dfc5862fdcc663d9e0adbfda30c940d43b49b4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Separate and add LPDDR4X MT53E2G32D4NQ-046 WT:C support for burnet/esche
ID#1: MICRON - MT53E2G32D4NQ-046 WT:C
BUG=b:225121354
BRANCH=none
TEST=1. emerge-jacuzzi coreboot
2. power on test ok
Change-Id: If720d7bcf185c5c0149a82125ec068fc75e5b3cd
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64069
Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake
pin that interrupts the system in active operation when the stylus
is removed or inserted.
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Id6ee977fbda3118229677aa76e5394f5592c3da8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6c5b3f83b66a2d54611ada3cb97ddda4b655d00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64606
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Chausie and Majolica boards use S0ix which is mutually exclusive
with S3, so don't select HAVE_ACPI_RESUME.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d1bf33ad017dfbf908e0a195949998668c8e137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64605
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for MB level dll tuning.
This patch sets the eMMC dll tuning parameters to default values needed.
There was issue observed on some eMMC devices which failed to boot in
HS400 mode.EV team suggested the intermediate eMMC dll tuning parameters
that needs to be set. We observed these values helped to fix the issue.
While we get the verified default values set from FSP directly, adding
it here to use it as the custom dll values needed.
BUG=b:230403441
TEST=Build and boot nivviks board. Verify the eMMC dll parameters are
overridden.
[INFO ] usha: After override dll_params
[INFO ] usha: emmc_tx_cmd_cntl=505
[INFO ] usha: emmc_tx_data_cntl1=909
[INFO ] usha: emmc_tx_data_cntl2=1c2a2828
[INFO ] usha: emmc_rx_cmd_data_cntl1=1c1b1d3c
[INFO ] usha: emmc_rx_cmd_data_cntl2=10049
[INFO ] usha: emmc_rx_strobe_cntl=11515
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I27771b663ce9808e5a5ef4b36c136ad78f924376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Set custom_pld of each USB port (both Type A and C) with actual
physical location values.
BUG=b:214025396
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ic84b9aae1501e36c2794382aabcf8225eef7783b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Won Chung <wonchung@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Remove the stop pin declaration for LAN. Confirmed with LAN vendor,
8111K do not need to implement stop pin. It caused S0ix fail.
BUG=b:231400227
TEST=Build and suspend_stress_test -c 5 pass
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Iae33068c4622f91d5cebb867e4b10f3834ce8bd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
add USBC0_RETIMER into 2, 3 bits for usb retimer.
BUG=b:232486478
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Idaf2e53387476d344d2c838a6e762f5a4c582989
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Follow the Thermal_paramters_list-0520.xlsx to modify DPTF baseline PL1
values.
1. Modify baseline PL1 min_power from 15000 to 12000.
2. Modify baseline PL1 max_power from 17000 to 25000.
BUG=b:231380286
TEST=emerge-brask coreboot
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ibd3098ee6bbf964cffddfcc9a4600cb7d81162d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64595
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nivviks
Add DPTF passive and critical policies for ADL-N Nivviks design.
Temperature threshold for triggering Passive Policy is set to 75C and Critical Policy is set to 85C respectively for TSR0/1.
BUG=b:224884901
BRANCH=None
TEST=Build FW and test on Nivviks board.
Verified thermal throttling successfully when participant reaches temp threshold as per Passive Policy.
Also, verified system shutdown when Temperature of participants are reaching threshold as per Critical policy.
Change-Id: I5c9b9e8c2489c7da501ca136e2aa6fbc764bf400
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64466
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:224884901
BRANCH=None
TEST=Build FW and test on Nivviks board
Change-Id: I3f5e8dd3d2ff517e27b0b08a0173f094bc6043bd
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Set PCH TSN link speed to 1 Gbps and enable MultiVC for all TSN
ports.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I8d43c3ba8f02645c8ad2993f76e610d838b0151a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Create the kuldax variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:233380254
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_KULDAX
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I95c04768bbed8657d2858bcd66fc041f56910b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
1. Add wifi sar table for volmar
2. Set EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG
BUG=b:233319626
TEST=emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I09069bbc3a41b66ec9a88cfede46acc067209b01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Timestamp '2000-00-00 00:00:00' is considered as the invalid format.
Enable RTC to fix incorrect timestamp format in the eventlog.
BUG=b:232035991
TEST=check the timestamp field in /var/log/eventlog.txt
Change-Id: I8d9822075377734ef4a609ddeee79385fe7af0f0
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
Disable RAPL for all mainboards based on mc_ehl for stable real time
mode of CPUs.
Test: Boot mc_ehl1 with this patch and ensure the bits in the MCBAR
register are cleared.
Change-Id: Ie58a4b6444d5be088ac2b25ff0a2f5cd33120ace
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The feature request was moved to Skyrim in the interest of time
and effort. The bug was updated to reflect this, and the comment
should be removed from the monkey island code base
BUG=b:232952508
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Id4ca43692aa56b6dba2f7acc1f924b30c1e966ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
On Guybrush, there wasn't a need for a sleep GPIO table.
Remove the TODO and filler table and function to reduce
unnecessary function calls/overhead.
BUG=b:232952508
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ic51ee4845d663acf34f050f7b3abf57a7c247c88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The HD audio controller of the GPU on bus A device 0 function 1 wasn't
enabled, so it didn't get resources assigned. Enable it to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9a4129ce594c5dd59f70e855fef5f2c04ebb9c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACP device on bus A device 0 function 5 wasn't enabled, so it didn't
get resources assigned. Enable the ACP device to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc9376314213e9d624756519f703d508411cb1bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64553
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The crypro device on bus A device 0 function 2 wasn't enabled, so it
didn't get resources assigned resulting in this the Linux kernel error:
[ 38.582036] pci 0000:04:00.2: attach allowed to drvr ccp [internal device]
[ 38.582064] ccp 0000:04:00.2: enabling device (0000 -> 0002)
[ 38.582175] ccp 0000:04:00.2: ioremap failed
[ 38.582178] ccp 0000:04:00.2: initialization failed
[ 38.582181] ccp: probe of 0000:04:00.2 failed with error -12
Enable the crypto device to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia812df6e59f3767dcbaa908fa620b62619590f85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64552
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are three external Marvell PHY 88E1512 on this mainboard. The PHY
IRQ comes with a falling edge but the EHL MAC side needs a rising edge
signal. For that reason, we need an inversion of the IRQ polarity.
Change-Id: Id3caf582b4434b046779f5733e6ad9b57528ce35
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake
pin that interrupts the system in active operation when the stylus
is removed or inserted.
BUG=b:233159811
TEST=EC wake event work as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Icf609c647e19914684a93c89022f2cd4888a67ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add supported memory parts in mem_parts_used.txt, and generate SPD id
for this part.
H9JCNNNBK3MLYR-N6E
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ibb111cddc00a0d066ef9792d974a6e4ad263cc99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I780e2765059ad7473fe5f33c50dd0d8a561151fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ib5770f02a6d524417be6723f7f70aa80d9452f62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64417
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
If the LTE USB DB is connected, enable LTE-related settings.
Otherwise, disable LTE-related settings.
BUG=b:229938024, b:229048361, b:229040345
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I37719cee48370a04534067aa64a3aa77e453948a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Enable SaGv support for crota
BUG=b:229600878
TEST=FW_NAME=crota emerge-brya coreboot
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ibc06ef19e9fbbc91ef650a4ac060ce2b7c5c25d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To make sure daughter board LTE existing, we update probe to DB ports
value of FW_CONFIG field, (https://partnerissuetracker.corp.google.com/issues/226910787#comment11)
as well as, refer to Google Henry and Ivan comments (https://partnerissuetracker.corp.google.com/issues/226910787#comment14)
BRANCH=dedede
BUG=b:226910787
TEST=on beadrix, verified by FW_NAME=beadrix emerge-dedede coreboot.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I9ab4412b614ec665fbafc998756b805591982b65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for Nereid
to achieve the better power savings.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:223102016
TEST=Verified all the UPD values are updated with these configs.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I1df4ea10798354f41fe9cce0f8c478930517207c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for Nivviks
to achieve the better power savings.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:223102016
TEST=Verified all the UPD values are updated with these configs.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: If8da0dfe3059087526f74042be3c8b7e4a7ece82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch configures external V1p05/Vnn/VnnSx rails for adlrvp-n
to achieve the better power savings.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
Kit: 646929 - ADL N Platform Design Guide
BUG=b:223102016
TEST=Verified all the UPD values are updated with these configs.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I06298eb1aec07eae34420c5736e912c707fefbc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The patch disables PCH USB2 Phy power gating to prevent possible display
flicker issue for primus board. Please refer Intel doc#723158 for
more information.
BUG=b:221461379
TEST=Verify the build for primus board
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I4d7d52bdeafe8b1b55822b5c8d040c94ce1f3878
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Nvidia GPU supports another function named NBCI (NoteBook Common
Interface), which has some subfunctions which are required for the
Nvidia kernel driver to consume. The specification for this function
comes from the Nvidia GN20 Software Design Guide.
BUG=b:214581763
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I19eb9417923d297a084d6f5329682e91cd506a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The agah variant will include an Nvidia GN20 series GPU, therefore
select the INCLUDE_NVIDIA_GPU_ASL Kconfig to include the respective
ASL code into the DSDT.
BUG=b:214581763
TEST=build patch train
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icc718d01506ccb4dd42841239e96926f4ddaa9c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some brya variants will use a GN20 series Nvidia GPU, which requires
quite a bit of ACPI support code to be written for it. This patch
lands a decent bit of the initial code for it on the brya platform,
including:
1) PEG RTD3 methods
2) DGPU power operations (RTD3 and GCOFF, NVJT _DSM and other Methods)
3) NVOP _DSM method
There will be more support to come later, this is all written to
specifications from the Nvidia Software Design Guide for GN20.
BUG=b:214581763
TEST=build patch train
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ifce1610210e9636e87dda4b55c8287334adfcc42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Based on quick fix on this commit 7b0fe59be (soc/intel/ehl: Fix
logical bug for PseTsnGbePhyInterfaceType), disable PSE TSN
SGMII as the original intention is to set the PSE TSN phy
interface as RGMII.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Id2e05b19f156621a945110791038bc0d19a0aad0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Select EC_GOOGLE_CHROMEEC_SKUID and EC_GOOGLE_CHROMEEC_BOARDID to
provide common routine for reading skudid and boardid from Chrome EC.
BUG=b:229052726
TEST=emerge-skyrim coreboot chromeos-bootimage
Check the corresponding directory gets mounted to /run/chromeos-config/v1
Change-Id: I6aff02d29d44e95cd9b9e9485593c81f0d4a4b0e
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
The audio codec used by crota has a level-sensitive interrupt,
therefore configure the GPIO pad as level-sensitive.
BUG=b:230418589
TEST=emerge-brya coreboot and verified pass
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I588c21e44b9bb17cd5a48bf5f22465ec328496e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fix descriptors for USB ports to align with their function and
placement with respect to the schematics.
BUG=N/A
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: If57bebf9bffd4616c437ec655b64cab3298ac08e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
There are efforts to have bootflows that do not follow a traditional
bootblock-romstage-postcar-ramstage model. As part of that CBMEM
initialisation hooks will need to move from romstage to bootblock.
The interface towards platforms and drivers will change to use one of
CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called
in the first stage with CBMEM available.
Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Remove the stop pin declaration for LAN. Confirmed with LAN vendor,
8111K do not need to implement stop pin. It caused S0ix fail.
BUG=b:232327947
TEST=Build and suspend_stress_test -c 5 pass
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I9bdaa28cd879c1ea7de2de8afb25761df39bcfc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently, the LTE pins are enabled in gpio.c, then disabled in
fw_config.c if LTE is not present. However, since there's a short delay
between mainboard_init() and fw_config_handle(), this means that when
LTE is not present GPP_H19 (SOC_I2C_SUB_INT_ODL, used for the SAR
sensor) will be floating for a short period of time.
Rework the GPIO config so that the LTE pins are disabled in the
baseboard, then enabled in fw_config.c for variants using LTE. However,
this doesn't work for WWAN_EN and WWAN_RST_L since they need to be
enabled in bootblock. So these are instead enabled in the variant
gpio.c, then disabled in fw_config.c if LTE is not present.
BUG=None
TEST=LTE still works on nivviks
Change-Id: I9d8cbdff5a0dc9bdee87ee0971bc170409d925a2
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
suspend
To make sure Realtek RTL8822CE suspend stress test smoothly, we remove
1c.7 as wireless LAN (WLAN) connects the signal PCIE_4 and it will map
to 1c.7. refer to Intel Simon comment (https://partnerissuetracker.corp.google.com/issues/230386474#comment12),
as well as, remove redundant 17.0 and 1c.6 that both are described by
baseboard/devicetree.cb
BRANCH=dedede
BUG=b:230386474
TEST=on beadrix, verified by Realtek RTL8822CE can run suspend stress
test properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ib418eed57f07afaa6b397b42a057808eab142f7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This CL adds the delay time into the RTD3 sequence, which will turn
off the eMMC controller (a true D3cold state) during the RTD3 sequence.
We checked power on sequence requires enable pin prior to reset pin
delay of 50ms and add delay of 20ms to meet the sequence on various
eMMC SKUs. Based on BH799BB_Preliminary_DS_R079_20201124.pdf in
chapter 7.2.
BUG=b:231291431
TEST=USE="project_crota" emerge-brya coreboot chromeos-bootimage
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Id9bed46e801602f3f327753053ec6a1ceb0656e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
EC wake event doesn't work. Nissa has a separate EC wake pin. SCI only
is not handled by EC, so we need to set dual route to wake the system.
BUG=b:229142661
TEST=EC wake event work as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ide1f4a2494bb0a64b11ab4c5135fc43d2a635f74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
There are two APL specific config switches for RAPL and min. cpu clock
(APL_SKIP_SET_POWER_LIMITS, APL_SET_MIN_CLOCK_RATIO). These switches
could be used in future in other CPU platforms. Move them to common code
instead of having them just for one SOC.
Test: Make sure that the clock ratio (MSR 0x198) and the RAPL settings
(MSR0x610) do not change with this patch applied on mc_apl{1,4,5}
mainboard.
Change-Id: I3d63d1b9b6c96586a3c20bf8c1d8001b1d7c4bed
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
repalcement ---> replacement
Change-Id: I486170e89f75fa7c01c7322bb8db783fd4f61931
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64404
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Program the `SmbusEnable` FSP UPD according to the SMBus PCI device's
state in the devicetree. This avoids having to manually make sure the
SMBus PCI device and the `SmbusEnable` setting are in sync.
Change-Id: I275a981f914a55dc57a75e7d436912ff0255a293
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64402
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Update override devicetree based on schematics.
2. Update Kconfig based on schematics.
BUG=b:229191897
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ia28ae16f609fda6d90558e69b2d41139dbe533fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Add the support RAM parts for mithrax.
Here is the ram part number list:
DRAM Part Name ID to assign
K4U6E3S4AA-MGCR 0 (0000)
K4UBE3D4AA-MGCR 1 (0001)
H9HCNNNBKMMLXR-NEE 0 (0000)
MT53E1G32D2NP-046 WT:A 2 (0010)
MT53E1G32D2NP-046 WT:B 1 (0001)
BUG=b:229191897
BRANCH=None
TEST=emerge-brya coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I2d19721a44f0176365a81da30d2f49b68a14df7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Configure GPIOs according to schematics
BUG=b:229191897
TEST=emerge-brya coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I31a1e02b2fa3d2075efbf488cd611b6c5a88500f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Hook up the hyper-threading setting from the FSP to the option API so
that related mainboards don't have to do that. Unless otherwise
configured (e.g. the CMOS setting or overriden by the mainboard code),
the value from the Kconfig setting `FSP_HYPERTHREADING` is used.
Also, remove related code from the mainboard kontron/bsl6, since it is
obsolete now.
Change-Id: I1023d1b94acb63f30455c56b394b68059deaaa16
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On this mainboard there are legacy PCI devices connected behind a
PCIe-2-PCI bridge. Not all clock outputs of this bridge are used. This
patch disables the unused PCI clock outputs on the XIO2001 bridge.
Change-Id: Iedbf0abfa554e0a6ad5b1d1741f4e9934103d171
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63931
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow the Kinox_schematic_R01_20220418.pdf to set memory SMBus
addresses to 0x52, 0x50.
BUG=b:231398371
TEST=Build and boot to OS with either 1 or 2 DIMM slots populated.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I32bb4f62a6b8a485ac757a60f5d16adb69109e2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This area is used for storing AP RO verification information.
BRANCH=none
BUG=b:227801913
TEST=build and boot nivviks
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: If5c03aca56e659d61c31613b284a55d0eba0d843
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This variant uses all three EHL Ethernet GbE-TSN Controller so enable
the TSN GbE driver in order to set the needed MAC addresses. The
required function to retrieve a valid MAC address was already implement
in the common mainboard.c for mc_ehl.
TEST:
- Boot mc_ehl2 into Linux and check MAC addr via 'ip a'
Change-Id: Ia052c44feb606f9e1d31d047f2acc67e3226a895
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
TSN runs in SGMII mode on this mainboard. This requires setting the link
speed to 1 Gbps.
Change-Id: I9f1da971b4de5671d6d38be6dbc50edbbe20d157
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This mainboard uses all three internal Ethernet GbE-TSN controllers. Two
of them are initialized by the Programmable Services Engine (PSE).
This patch enables the Serial Gigabit Media Independent Interface
(SGMII) mode for GbE PSE0 and GbE PSE1. By setting PCH PSE DMA pins to
host owned, the IO is under control of the IA processor cores through
system software.
TEST:
- Boot mc_ehl2 into Linux and check inet addr via 'ip a'
Change-Id: I74e660548b2c44d5dbdb6023d5a36cfdd7e96f43
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Both option-HDMI and option-DP use the same setting of vbt,
and ABSENT is just physically remove option board from motherboard,
so it just need one vbt, and it don't need the fw_config to decide
which vbt will be return.
BUG=b:231769131
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1f8cdcbc05ed3bc689d29261e4fd4d700326dce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Both option-HDMI and option-DP use the same setting of vbt,
and ABSENT is physically remove option board from motherboard,
so set default vbt has option-DP setting and only return it.
BUG=b:231769131
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I440143dabcf04c103f2a4420a7e4afb8ec12ec1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Use the existing definitions from FspUsb.h instead of magic values for
the ComboPhyStaticConfig settings in the mainboard's devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2707d017909b7516e5d8711c8f4e2914165ed10d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The commentary was wrong, write_protect_state() is only called
in ramstage at the moment, and only if MRC_SETTINGS_PROTECT is
selected.
Implementation of get_gpio() eventually does the MMIO read, so
BOARD_GOOGLE_CYAN was not a special case.
Change-Id: I96ca871110bcf2fc1485bd042ed137d51b822a20
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic59cccdf0fb88fc71a440170ee40b73dd8736a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Nivviks uses CNVi WLAN, so disable the PCIe-related GPIOs.
BUG=b:218929856
TEST=Boot to OS on nivviks and check that WLAN still works.
Change-Id: I68f12490b0f09658e1307828b0e4488504f50e61
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable either eMMC, NVMe or UFS based on fw_config. NVMe and UFS are
only supported on nirwen, an additional nissa variant based on nivviks
and sharing the nivviks coreboot target.
BUG=b:218929856
TEST=Boot to OS on nivviks to check that eMMC still works. NVMe and UFS
will be tested once nirwen boards are available.
Change-Id: Ibdb122ef35920c962d7bd9f3f238a5d548112282
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Nirwen is an additional nissa reference board which is almost identical
to nivviks, so is reusing the nivviks coreboot variant. However, there
are two GPIO changes, so update the GPIO tables to handle these based on
board_id.
nivviks:
GPP_D6 -> WWAN_EN
GPP_E13 -> NC
nirwen:
GPP_D6 -> SSD_CLKREQ_ODL
GPP_E13 -> WWAN_EN
BUG=b:218929856
TEST=Boot to OS on nivviks
Change-Id: I494ed127714069a8f36d16d11ca4e8a1f3d37827
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:218929856
TEST=Boot to OS on nivviks. Set fw_config in CBI and check that pen
garage is enabled/disabled as expected.
Change-Id: I2c3f5403e0f11443ad3647b8c4ae624f0b88a111
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:218929856
TEST=Boot to OS on nivviks. Change fw_config in CBI and check that WFC
is enabled/disabled as expected.
Change-Id: Iac4bb358d904579376e0810f8c2644b3bde4f1e6
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch sets the RComp resistor values to default values needed.
BUG=b:231202733
TEST=Build and boot nivviks and nereid. Verify the Rcomp values are set
to default values from debug FSP log.
[SPEW ] Updating Rcomp Targets:
[SPEW ] RcompTarget[RdOdt]: 48
[SPEW ] RcompTarget[WrDS]: 30
[SPEW ] RcompTarget[WrDSCmd]: 20
[SPEW ] RcompTarget[WrDSCtl]: 20
[SPEW ] RcompTarget[WrDSClk]: 20
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I2c7a54c49e282446ece77ca406951782282a009a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Crota.
BUG=b:231686917
TEST=USE="project_crota emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ie10167e48256a61801b2623ae4500db5e67e73cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change ELAN touchscreen i2c address to 0x16 and change HID to ELAN900C
BUG=b:231684121
TEST=local build and tested with ELAN touch screen
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ide005a0681e236c3102090c1c36ab81926849000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:218929856
TEST=Boot to OS on nivviks. Change fw_config in CBI and check that SD
card is enabled/disabled as expected.
Change-Id: Idcf38343bb290b1eff6a2e440f868b03acba3288
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Ti50 firmware versions below 0.0.15 don't support the firmware_version
register and trying to access it causes I2C errors. Some nissa boards
are still using Ti50 0.0.12, so add a workaround Kconfig to skip reading
the firmware version and select it for nissa. The firmware version is
only read to print it to the console, so it's fine to skip this. This
workaround will be removed once all ODM stocks are updated to 0.0.15 or
higher.
A similar workaround Kconfig was added in CB:63011 then removed in
CB:63158 which added support for separate handling of Cr50 and Ti50.
But we actually still need this workaround until all Ti50 stocks are
upgraded to 0.0.15 or higher.
BUG=b:224650720
TEST=Boot to OS on nereid with Ti50 0.0.14
Change-Id: Ia30d44ac231c42eba3ffb1cb1e6d83bb6593f926
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With GPIO_DRIVER_LOCK kernel driver can't change to IRQ. Thus, we need
to set it as INT in coreboot to make the IRQ work.
BUG=b:223476974
TEST=evtest work as expected.
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 15 (SW_PEN_INSERTED) state 0
Properties:
Testing ... (interrupt to exit)
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: -------------- SYN_REPORT ------------
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I5f9fdfb2622b4b955da216119e74c6f7d5795d36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Specify the USB PHY settings in the devicetree instead of relying on the
FSP defaults. The USB PHY configuration for Chausie are taken from the
internal UEFI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cc38e6e26d53802773fe3c405415de15cca98a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With this patch, the ThinkLight on the ThinkPad T60 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Change-Id: I47f878533d36857d002d2e2605cc8bc7e1d960c9
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Found using:
diff <(git grep -l '#include <cf9_reset.h>' -- src/) <(git grep -l 'RST_CNT\|FULL_RST\|RST_CPU\|SYS_RST\|do_system_reset\|do_full_reset\|cf9_reset_prepare\|system_reset\|full_reset' -- src/) |grep "<"
Change-Id: I093d8412e14ce81b462fb9a7ccb3a2a93ae760a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
