summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2015-08-26Google Kconfig: Add MAINBOARD_HAS_NATIVE_VGA_INIT in good placesMartin Roth
Add 'select MAINBOARD_HAS_NATIVE_VGA_INIT' which is just used as a gate symbol to display MAINBOARD_DO_NATIVE_VGA_INIT to the mainboards that are already selecting MAINBOARD_DO_NATIVE_VGA_INIT. Since MAINBOARD_HAS_NATIVE_VGA_INIT is not used in any code, this should not have any other effects. This fixes the warning: warning: (BOARD_SPECIFIC_OPTIONS) selects MAINBOARD_DO_NATIVE_VGA_INIT which has unmet direct dependencies (VENDOR_ASUS && BOARD_ASUS_KFSN4_DRE || MAINBOARD_HAS_NATIVE_VGA_INIT) Change-Id: I8ceee69ebae90dc32f55df58c2e80fe25397f049 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11301 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-23AMD Kconfig: Remove QRANK_DIMM_SUPPORT from unsupported platformsMartin Roth
The AMD K8 northbridge uses the Kconfig symbol QRANK_DIMM_SUPPORT, but the symbol was used on a number of Family 10 boards as well. AMD Family 10 doesn't use this Kconfig symbol for anything. I verified that the symbol wasn't used actually getting used in any of these platforms. Fixes Kconfig warnings for these 19 mainboards: warning: (BOARD_SPECIFIC_OPTIONS...) selects QRANK_DIMM_SUPPORT which has unmet direct dependencies (NORTHBRIDGE_AMD_AMDK8) Change-Id: I454992a4975566fd6439a21f5a800d0cfa1b4d3b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11300 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
2015-08-21ChromeOS: Fix Kconfig dependenciesMartin Roth
Add CHROMEOS dependencies to selects for the following Kconfig symbols: CHROMEOS_RAMOOPS_DYNAMIC CHROMEOS_RAMOOPS_NON_ACPI CHROMEOS_VBNV_CMOS CHROMEOS_VBNV_EC CHROMEOS_VBNV_FLASH EC_SOFTWARE_SYNC LID_SWITCH RETURN_FROM_VERSTAGE SEPARATE_VERSTAGE VBOOT_DISABLE_DEV_ON_RECOVERY VBOOT_EC_SLOW_UPDATE VBOOT_OPROM_MATTERS VBOOT_STARTS_IN_BOOTBLOCK WIPEOUT_SUPPORTED This gets rid of these sorts of Kconfig errors: warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS) Note: These two boards would never actually have CHROMEOS enabled: intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11272 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-20mainboard: Get CHROMEOS/MAINBOARD_HAS_CHROMEOS right (again)Alexandru Gagniuc
CHROMEOS is a user-visible bool. It must not be 'select'ed in Kconfig. That's why we have MAINBOARD_HAS_CHROMEOS. This is the fifth time I find this being used wrong. Why is this confusing/so hard to get right? Change-Id: Icb4629355c63508f5a044b46842524b3d203c2da Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11290 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Fix Wifi, kepler RP mapping and enable ClkReqSupportPratik Prajapati
(1) Wifi is connected on RP1 which is 1c.0 , so enabling 1c.0 and disabling 1d.0 (2) kepler is on RP5 which is 1c.4, so enabling it (3) enabling ClkReqSupport for RP1 and RP5 so that L1 substates can get enabled. BRANCH=None BUG=chrome-os-partner:43738 TEST=Built and boot for Kunimitsu. checked all PCIe powersaving states (LTR, L1, L1S) are enabled Original-Change-Id: I525661399d1a4d939b53d5ed5f7991598b84ddcd Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/293482 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ib9a771a6ec137217668fb0385efc13b1824772b4 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: http://review.coreboot.org/11237 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19glados: use macros for magic numbers in ASLAaron Durbin
The skylake SoC code now has macros for the previously hard-code numbers for IRQs and GPEs. Switch over to using those as they bring a little more clarity. BUG=chrome-os-partner:43522 BRANCH=None TEST=Built and booted glados. Original-Change-Id: Ic8fcc59d680cdddec9dfbc3bf679731f6d786793 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/293411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I594907005372100a3c9d17dda9d17769844ad272 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Enable root ports and clkreqsPravin Angolkar
This patch enables the root ports and configures the clock req numbers as per the design On kunimitsu FAB3 board with D0 MCP Root port 1 --> Wifi card --> clkreq 1 Root port 4 --> Kepler VP8/VP9--> clkreq 2 BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for Kunimitsu and Boot Kunimitsu board with D0 MCP Original-Change-Id: I4e110d2d07efbfa7a306852301cd1cd89027b2ba Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/290051 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com> Change-Id: I6d66c78496ac3f43e07d96feefed35cf50da6aa1 Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Reviewed-on: http://review.coreboot.org/11232 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Update Mainboard ASL for Kunimitsu FAB3 with D0 MCPNaveen Krishna Chatradhi
This patch updates the mainboard.asl file to support Kunimitsu FAB3 board which is based on SKL D0 MCP. BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for kunimitsu; booted on kunimitsu FAB3 with D0 MCP Original-Change-Id: I31a315740d49125591591b20c296babe49004166 Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/290050 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I81c22e407d1b3d420744eaf1d3f7ff4e8e749bcb Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11231 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-19Kunimitsu: Update Gpio table for kunimitsu FAB3 variantNaveen Krishna Chatradhi
This patch updates the GPIO table to support Kunimitsu FAB3 variant, based on SKL D0 MCP. BRANCH=None BUG=chrome-os-partner:43324 CQ-DEPEND=CL:*224327, CL:*224328 TEST=Built for kunimitsu; booted on kunimitsu with D0 MCP. Original-Change-Id: I2343187a919f6d29161069135d97484191198056 Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/289939 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I47302062788a90550fd38cb113e418b21d3f756c Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Reviewed-on: http://review.coreboot.org/11230 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-17Fix Kconfig: ALWAYS_LOAD_OPROM has unmet dependency VGA_ROM_RUNMartin Roth
Broadwell and Skylake chipsets, along with a few mainboards were selecting ALWAYS_LOAD_OPROM without making sure that the dependency for that symbol was met as well. Looking at the dependencies for VGA_RUN_ROM, we see: PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT Since ARCH_X86 selects PCI, that's always met here. Since Broadwell and Skylake don't have native VGA init yet, that's not needed. - Make sure that VGA_RUN_ROM is selected as well. - Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and VGA_RUN_ROM symbols where they're selected. Fixes Kconfig warning for these boards and chipsets: warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS) selects ALWAYS_LOAD_OPROM which has unmet direct dependencies (VGA_ROM_RUN) Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11246 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-14emulation/qemu: Serialize IQCR methodPaul Menzel
Fix the remark below for the mainboards qemu-i440x and qemu-q35. Intel ACPI Component Architecture ASL+ Optimizing Compiler version 20150717-32 Copyright (c) 2000 - 2015 Intel Corporation dsdt.aml 336: Method(IQCR, 1, NotSerialized) { Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within) ASL Input: dsdt.aml - 399 lines, 16756 bytes, 245 keywords AML Output: dsdt.aml - 4000 bytes, 146 named objects, 99 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 233 Optimizations Change-Id: Ibe48f872768ab8295d6fed3359d9eef04b736a05 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/11162 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-14glados: make EC_SCI_L workAaron Durbin
In order for the EC_SCI_L to work the GPE0 route needs to be set along w/ the GPE event for the EC. As the GPE0 route is dynamic the EC_SCI_GPI needs to be set along with the route so everything lines up. In this case, the GPE0 route is set to the defaults such that GPP_C, GPP_D, and GPP_E are routed to GPE0 block 0, 1, and 2, respectively. This works out for glados because the EC_SCI_L is connected to GPP_E16. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts is incrementing as well as /sys/firmware/acpi/interrupts/gpe50. Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/292011 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11210 Tested-by: build bot (Jenkins)
2015-08-14glados: make EC_SMI_L functionalAaron Durbin
Set the EC_SMI_GPI define to be GPP_E15 and route that GPIO for SMI generation. Also, the mainboard_smi_gpi_handler() was introduced on skylake in order to process any GPI that could generate an SMI. Switch to this handler so one can process the appropriate events. BUG=chrome-os-partner:43778 BRANCH=None TEST=Used 'lidclose' on EC command line during depthcharge to confirm EC_SMI_L generates SMI and shutdown happens. Original-Change-Id: Ia365b86161670a809e3fa99dde38fccc612d5e77 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291934 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: Ic16ea8e8d6ff564977ed2081d2353c82af71adea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14skylake: remove ec_smi_gpio and alt_gp_smi_enAaron Durbin
The ec_smi_gpio and alt_gp_smi_en devicetree options are goign to be removed. The plan for skylake is to set the settings by the mainboard through either gpio pad configuration or through helper functions. Moreover, these values only allow *1* SMI GPIO configuration in that the following has to be true: alt_gp_smi_en = 1 << (ec_smi_gpio % 24) If not, then another gpio(s) from the same group has the SMI_EN bit set for it. Lastly, remove all the subsequent dependencies as they are no longer used: enable_alt_smi() and gpio_enable_group(). BUG=chrome-os-partner:43778 BRANCH=None TEST=None Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291931 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14kunimitsu sklrvp: remove unused IedSizeAaron Durbin
The skylake code is using IED_REGION_SIZE instead of devicetree.cb. Drop the the option from the device trees. BUG=chrome-os-partner:43636 BRANCH=None TEST=None Original-Change-Id: Ib252266060fbc6ed0eeaac19a6b79c173c6c9a13 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290932 Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Trybot-Ready: David James <davidjames@chromium.org> Change-Id: Ib08628e163ac27d4c49eddcbec6cab3252abd4aa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11200 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14glados: enable SMBus deviceAaron Durbin
In order to run with the debug FSP the SMBus device needs to be enabled. Additionally, the TCO block lives within the SMBus device so if TCO is to be employed then the SMBus device needs to be enabled as a prerequisite. BUG=chrome-os-partner:42407 BRANCH=None TEST=Buit and booted into kernel. Original-Change-Id: I269650fa5222b4741ef495188dff1f4b8176fe89 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/290364 Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com> Change-Id: Ia1f72ea7bd70728de83cdff07df9810a326266c2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11181 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-14glados: move to native gpio configurationAaron Durbin
Instead of relying on FSP to do gpio configuration in one place use the native support in coreboot. This also removes the open coded configuration of the memory configuration ids. BUG=chrome-os-partner:42982 BRANCH=None TEST=Built and booted glados. Original-Change-Id: I4655221d821d91a2270d774305a02d6bd5c3959c Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/289800 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I2e66242d050c3825f6bc65d3d2c7f51d2cdfbd73 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11175 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13glados: Enable wake from EC via LAN_WAKE#Duncan Laurie
Enable the Deep Sx pins to allow wake from the EC via LAN_WAKE#. Report the EC wake pin LAN_WAKE as GPE[112]. BUG=chrome-os-partner:43079 BRANCH=none TEST=suspend/resume on glados with wake from keyboard Original-Change-Id: I99664e1e406d15e7460046a6168cbd3a377aaca4 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288921 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: I19db144ed5db183f47af03340886a5e770af8bc8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11171 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-08-13getac/p470: enable early cbmem initPatrick Georgi
Change-Id: I4afec92c57c6af4c99858afae53fa7746f47bc7a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11159 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-13getac/p470: Enable native VGA initPatrick Georgi
Change-Id: I6c5a2324d1a9e21f4e052678be8f0e0dbfed6494 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11136 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-13getac/p470: Add C-State valuesPatrick Georgi
Derived from what the vendor BIOS is doing. Change-Id: Ie2cba7b86b6bb3f1dcc4a5e1c189aa45d0aab109 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Found-by: fwts 15.08 Reviewed-on: http://review.coreboot.org/11142 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-11getac/p470: Clean up SIO access in ACPIPatrick Georgi
This adapts Ia5101d5a1 for the p470. Change-Id: Ib09a0bc58fddd6240834cc890f00df91a74f4161 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-08-10google/stout: Fix ELOG related ifdefsPatrick Georgi
The used functions require the ELOG_GSMI feature, not just ELOG. Change-Id: If38cf0b710d9236012bfb1f0b119c10f9e533a25 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11098 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-10getac/p470: enable GPU devices in devicetreePatrick Georgi
This enables adding the GPU specific entries to the SSDT. Change-Id: I04d0eb7bf6f3e28d89c9318b777875e8a78b1ab5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11140 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-10getac/p470: Make suspend-to-ram workPatrick Georgi
Change-Id: I37c5d8dd9353d4181046186688f20a3b85973562 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11153 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-08-09riscv-spike: support for Spike emulation of riscvThaminda Edirisooriya
Spike support: QEMU RISCV is broken, and the maintainers at Berkeley are working on it, but at the moment spike is the only way to test on riscv. Add support for spike console output for debugging. Privileged ISA: Update to privileged ISA in RISCV (machine, supervisor, hypervisor, user modes) broke exisitng RISCV asm, and bootblock.S was updated to match the new spec. Clean old assembly [pg: things build with gcc 4.9 now, but don't expect them to work. Hardcoding register names into the assembler language may not be the smartest idea of the RISCV folks.] Change-Id: Ie2c109d3c26712c207512f74f28ce1a925e6e181 Signed-off-by: Thaminda Edirisooriya <thaminda@google.com> Reviewed-on: http://review.coreboot.org/11078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-09license headers: Drop FSF addresses againPatrick Georgi
Some FSF addresses found their way back into our tree. Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/11145 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-08-08google/urara: Stub out get_write_protect_state()Patrick Georgi
vboot2 requires it Change-Id: I63bc3f176af72da8ea172a09aa536a10f1184b14 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/11099 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-30gigabyte/ga-b75m-d3h: Update device treeDamien Zammit
This patch resolves the outstanding issues with PCI device enumeration and getting the board to boot into GNU/Linux with VGA rom. Previously the board would not boot to GNU/Linux with video, even if VGA rom was used. Bugs in the devicetree were fixed according to superiotool output. Tested on GA-B75M-D3H with VGA rom. Booted to GNU/Linux (Fedora 22 4.0.4-301.fc22.x86_64) Change-Id: Ide1f406652659e6f99ee5d993719c187650fffe4 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/10895 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-30amd/bettong: Enable fan controlWANG Siyuan
1. Use enable_imc_thermal_zone to enable fan control. 2. The ACPI method ITZE works on Ubuntu 14.04 and Windows 7 but does not work on Windows 8, so I didn't use it. After this issue is fixed, I'll add ACPI_ENABLE_THERMAL_ZONE in bettong/Kconfig. 3. Fan control works on Bettong. I used "APU Validation Toolkit" to test on Windows 8. This tool can put load to APU. The fan's behaviour is just like bettong/fchec.c defined. When the temperature is 40 Celsius, the fan start to run. Change-Id: I0fc22974a7a7cf3f6bdf5f1c66be95219a177e12 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10721 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-29skylake: clean-up pei_datarobbie zhang
Remove the items that are obviously broadwell left or become no-need with fsp. BUG=chrome-os-partner:43186 BRANCH=None TEST=build and boot on sklrvp3. Signed-off-by: robbie zhang <robbie.zhang@intel.com> Change-Id: I5dfd62363eecc514e45a7b7ba0961ec7fe0499ee Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 570920cdc9e9c08ee85dcb08998069f1cae2d3cd Original-Change-Id: I63176584042516c4d28f1bb6403e7bbe5de61010 Original-Reviewed-on: https://chromium-review.googlesource.com/288833 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com> Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: http://review.coreboot.org/11072 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29veyron_rialto: Select PHYSICAL_REC_SWITCHJonathan Dixon
Copied from Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769 BUG=chrome-os-partner:43022 BRANCH=None TEST=Used physical recovery button to enter dev mode on rialto Change-Id: I39fd13fee3b9f272f3dc08a447091e05a3d74741 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: eed0652f84cba963044908bb91aac7b8c1c81fd4 Original-Signed-off-by: Jonathan Dixon <joth@chromium.org> Original-Change-Id: I388d8bb0faa93b54540be095e68450192592a093 Original-Reviewed-on: https://chromium-review.googlesource.com/287660 Original-Reviewed-by: Jason Simmons <jsimmons@chromium.org> Reviewed-on: http://review.coreboot.org/11069 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29veyron: update mickey sdram-lpddr3-samsung-2GB.incjinkun.hong
Modify MR3_I/O Configuration, Change 34.3 ohms to 60 ohms. This resolves an issue that was observed on some Mickey boards with the Samsung 2GB LPDDR3 and is believed to be caused by inferior routing on the small PCB. (Elpida 2GB LPDDR3 seems unaffected.) BUG=chrome-os-partner:41905 TEST=Boot from mickey BRANCH=None Change-Id: Ic20d9eceb00658c214fd032a2f213dbe0d51a91b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1305010aee6818910ad1dec26d9d948505ca281e Original-Change-Id: I5517e07fc5716ed4cd58e5502f13ccd61ffb5357 Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com> Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286333 Reviewed-on: http://review.coreboot.org/11051 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29Revert "smaug: Do not gate XUSB partitions"Andrew Bresticker
The PLLU and UTMIPLL power-up sequences have been fixed in the kernel. It's no longer necessary for the XUSB partitions to be ungated at boot. This reverts commit 3a4a8a97c1851b6f3dd211451d9678358fac3ad7. BUG=chrome-os-partner:41244 TEST=Build and boot on Smaug; xHCI still works. BRANCH=none CQ-DEPEND=CL:282765 Change-Id: Id9a1c9960b6c7286b3185c60371d864874f50bb3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d52e50240bca62997af729722fbcdf5226438b7f Original-Change-Id: Ieb9c8644a5fb108d77703933fde82d359f403fd1 Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286810 Original-Reviewed-by: Benson Leung <bleung@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Mark Kuo <mkuo@nvidia.com> Original-Reviewed-by: Mark Kuo <mkuo@nvidia.com> Reviewed-on: http://review.coreboot.org/11050 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29google/stout: Implement functions required by CHROMEOSPatrick Georgi
BRANCH=none BUG=chromium:513990 TEST=google/stout builds Change-Id: I00de7524297e4471a9f7d6afd0d2b991d29020e9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: b85c54af7d4def45f014ee1d9b79df0b649f90f7 Original-Change-Id: I0870dd11c97cecc932a135f73be8234a88c0622b Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288860 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/11064 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29google/parrot: Implement functions required by CHROMEOSPatrick Georgi
BRANCH=none BUG=chromium:513990 TEST=google/parrot builds Change-Id: I5e354d6160e554f1c41e84eac6102e84de34b81d Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: d5a6253e6f19815736a6b433f6c58e3be2e5841b Original-Change-Id: I3a3bf9ead333d56472f856c9efefff239fb70586 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288852 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/11063 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-29google/butterfly: Implement functions required by CHROMEOSPatrick Georgi
BRANCH=none BUG=chromium:513990 TEST=google/butterfly builds Change-Id: Ia678ca4b0778ee4a2e55ba44a5d89ac6dd691b35 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 0d82ea2090fae9c66f41ee05cc20a9b22d3641c0 Original-Change-Id: I2fea10c17b769ca76b9d0b80978b4c512ed8c680 Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/288851 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/11062 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-24glados: Support reading memory strap GPIOs to select SPDDuncan Laurie
Add some board specific code to enable the memory configuration GPIOs in GPIO input mode and read them to determine which memory type is on the board. Also add the other memory types that are not yet present in the glados mainboard directory. This should be replaced with the real gpio infrastructure once it is ready. BUG=chrome-os-partner:43069 BRANCH=none TEST=build and boot on glados Change-Id: I7a9ce10e92ad6681528572e87b6cfee29880841a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d81e969c5950fd89bb745d1403abddb08a942f83 Original-Change-Id: Iffb0bd5c176f2adbdd9302d9bff5b7bde725d671 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/287436 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11046 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-24glados: Enable internal pullup for EC_IN_RWDuncan Laurie
Enable 20K internal pullup for the EC_IN_RW GPIO. BUG=chrome-os-partner:42285 BRANCH=none TEST=build and boot on glados Change-Id: I499164fb5050d350510072d2a06eb97fb7f9fcb1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e2de7d4800797a1585165a34dd39af3d635b1f55 Original-Change-Id: I7af1b78482197701aa452998106c2c3476fcc330 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/287437 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11045 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-24glados: Add ACPI configs for speaker amps and codecBen Zhang
The audio codec nau8825 and two ssm4567 speaker amps are instantiated via ACPI. BUG=chrome-os-partner:41280 BRANCH=none TEST=The devices are instantiated. Speaker/headphone playback works on glados. Change-Id: I1297c2435b3051dd749ad7de324b64ba1504cf09 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 59e5eb2682a2fc2cb58068dfcb6dd2415d43b286 Original-Change-Id: Ib7ec8c868251601f67cdf365cd3e935d256c8ac5 Original-Signed-off-by: Ben Zhang <benzh@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282364 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11044 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-24rockchip: rk3288: extend jerry backlight vcc_led delay timehuang lin
some jerry panels need more delay time between the vcc_led and bl_en, so we extend the delay time from 20ms to 120ms. BUG=chrome-os-partner:42997 TEST=Boot from jerry, and do not flicker again BRANCH=none Change-Id: Ifcf84578038eb5c2e5a0dfae936ee63cef671968 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0b00b6bd108f0aae461085d00819eca08ec892b3 Original-Change-Id: I74999601b41ccac22493cc9cd0bf52cd4dbb8c26 Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/287373 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/11042 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-23sklrvp: Add board_info fileStefan Reinauer
Change-Id: I658f88189857e25dde474d59875650f72c680818 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10972 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-23nvidia southbridges: don't touch 0x78 in LPC bridge with Fam10hJonathan A. Kollasch
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC bridge register 0x78 (particularly the 0x7b byte) to get to ramstage: Assume that there's something about this register that adjusting it the way we do for K8 is something that can/should be universally avoided on all Fam10h systems with these chipsets. Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10984 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-07-23google/veyron_rialto: enable VIRTUAL_DEV_SWITCHJonathan Dixon
BUG=chrome-os-partner:43022 TEST=None BRANCH=None Change-Id: I41c904603e7213da1c8d8e0945b572f6ba844031 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d91722317ffc55a4848e8e3bdac8412218fe1dc4 Original-Change-Id: I1ed4c7aaa35158815f8f7a94eafb77db55a381d0 Original-Signed-off-by: Jonathan Dixon <joth@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/287300 Original-Reviewed-by: Jason Simmons <jsimmons@chromium.org> Original-Reviewed-by: Karl Townsend <karlt@chromium.org> Reviewed-on: http://review.coreboot.org/11036 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-23glados: Fix the write protect GPIO exported in ACPIDuncan Laurie
Update the write protect GPIO reported in ACPI to be 71 which is GPP_C23. Also update the controller id to INT344B:00 which will point at the sunrisepoint device in /sys/class/gpio. BUG=chrome-os-partner:42560 BRANCH=none TEST=verify crossystem output with and without WP enabled Change-Id: I625859bd8ac371a5c0cae18697dccf216c26a8b6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8fc5cb6b72dacd6aefe69fe8204f4e0d209ed8a4 Original-Change-Id: I04892e75f9bfe739c44eb40e7c6a969c33e157ca Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286842 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11035 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-23glados: Add SPD manufacturer and part numberDuncan Laurie
The FSP memory info hob does not return this data so we need to supply it from the SPD included with the mainboard. BUG=chrome-os-partner:42975, chrome-os-partner:42561 BRANCH=none TEST=execute "mosys memory spd print all" on glados Change-Id: Idfb71d36d1f8163d0daceb68675b10194db7cde7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7feece45900e5166864927047ad3ab7b997f8258 Original-Change-Id: Id2bc544ac5faf53f0f676fe132fea1db5640a401 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286877 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11034 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-23glados: Set the write protect GPIODuncan Laurie
The write protect gpio is not added to the gpio map so the structure is not valid for vboot to consume. BUG=chrome-os-partner:42560 BRANCH=none TEST=build and boot on glados, check basic crossytem output CQ-DEPEND=CL:286911 Change-Id: I228d75049b919449072e395699c822203a08f1c6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d15438c4bf56d92189f2f501a62b55b5d00ba461 Original-Change-Id: I3290c4b96e1cc675c618a983915b778f11175020 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/286930 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11031 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-23cyan/strago: disable Ambient Light Sensor deviceJagadish Krishnamoorthy
No devices are connected to i2c4 bus on both strago and cyan board. Hence disabling the ALS platform data. This will fix the i2c4 timeout issue and also help in boot time optimization. Removed unused macros. BUG=None BRANCH=chrome-os-partner:41934 TEST=After booting to kernel, i2c4 timeout error message should not appear in dmesg. Change-Id: Ib7ab4c95b0830a8d4e53c6c0ee919649ad1ed354 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c52b64037b46016fe01f1d55c4c58f7684eb778 Original-Change-Id: Ia7acdcef67a2f2837866f56aa0426a02ee05db46 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283608 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11005 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-23intel/strago: BCRD2: Enable Realtek Audio codec on I2C4Jenny TC
In BCRD2, RTEK audio codec is connected to I2C4. Create a RTEK device entry on I2C4 to enable Audio on BCRD2. In BCRD1, RTEK device is connected to I2C2. Having two devices with same HID breaks the Audio on BCRD2 even if I2C2.RTEK._STA returns 0. The Audio codec driver in kernel is hard coded to use first instance of the device (:00). When two devices are present with same HID, first device gets an instance number :00 even though _STA returns 0. Second device which is on I2C4 and POR for BCRD2 assigned with instance number :01. The device with :01 is not getting enabled since the Audio codec driver supports only :00. This need a proper fix in kernel which is in the pipeline. Audio on non BCRD2 platforms on Strago build would be disabled since RTEK device is not present on I2C2. BRANCH=None BUG=None TEST=Build and boot the system Change-Id: Ia97d011c951275e6179c8b79a22c496b8169356b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d71a41ee703e6f60299b9e31a408af2ca06d8e24 Original-Change-Id: I4b032e930e46da77474f8f5969e95f9560b3e905 Original-Signed-off-by: Jenny TC <jenny.tc@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285193 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com> Reviewed-on: http://review.coreboot.org/11003 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-22winent/mb6047: move power_on_after_fail out of RTC century byteJonathan A. Kollasch
Change-Id: I3cf6a579f4e62a59828e81aa63c3a1a020a15ea6 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10906 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-21google/cyan: Configure EC_IN_RW signal as gpio inputHannah Williams
BUG=chrome-os-partner:42881 BRANCH=None TEST=Using ctrl-d in recovery mode to switch to dev mode works. Change-Id: Iefbd11d435c4beb570875d4835a085b194d1d1e8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: be172409792a224855b1d31621f23d1969d319b9 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Change-Id: Icf57dfc4cc258aa2cba341f40d285f8c843aace5 Original-Reviewed-on: https://chromium-review.googlesource.com/286612 Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com> Original-Tested-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11013 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21intel/cyan: Fix crossystem "wpsw_cur" statusHannah Williams
The GPIO mapping was incorrect for wpsw_cur. The GPIOs for East community were in two ranges: 0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and 12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26] The discontinuity was not accounted for, hence the error. The original offset was 0x16 whereas it should be 0x13 BUG=chrome-os-partner:42798 BRANCH=None TEST=Run crossystem and test wpsw_cur entry. If screw is present, it should be 1 and if not present, it should be 0 Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917 Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286534 Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/11010 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Kunimitsu: Add comment and separate routinesLee Leahy
Document the lid open state and separate the routines with a single blank line. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: I244f20c03bc7530ad8d140fba41dd97c12c079e1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 57313253fdef3f2d3f0e16b8ab8aa91202d45b16 Original-Change-Id: I7b3bd9cf16e915d214eb2de0017a8d91a934b112 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286267 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/11009 Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21Kunimitsu: Remove address from copyright noticeLee Leahy
Remove the address from the copyright notices. BRANCH=none BUG=None TEST=Build and run on Kunimitsu Change-Id: Ibe8196841d9e76c9ee3a3dbae802ecc63dc7904c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cc12d2658324a375d02748098f0a2f4b5d1b5615 Original-Change-Id: I81a71e4ad9b8a66ad0e9a93cbeb512d90eb35906 Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/286266 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com> Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/11008 Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Tested-by: build bot (Jenkins)
2015-07-21Cyan: Tune charger current limit in performance states table.li feng
Charger performance states table defines charger current limit for each p state. Modify charger current control values for SANYO battery used in Cyan. BUG=None BRANCH=None TEST=System is charging battery, in shell window, issue command "echo 0 > /sys/class/thermal/cooling_device4/cur_state", "echo 1 > /sys/class/thermal/cooling_device4/cur_state", "echo 2 > /sys/class/thermal/cooling_device4/cur_state", "echo 3 > /sys/class/thermal/cooling_device4/cur_state", or "echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC console show different charging current value. Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09 Original-Signed-off-by: li feng <li1.feng@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285605 Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Reviewed-on: http://review.coreboot.org/11004 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Glados: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART2 to PCI mode in devicetree for glados board. Also we switch over to CONSOLE_SERIAL8250MEM_32 here. 8-bit legacy UART will stop working after devicetree change. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for glados and tested LPSS logs on glados. CQ-DEPEND=CL:284881 CL:284882 CL:284883 Change-Id: I433979c852c80848c006ef089b43d75a17e761c5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c37519e0762801cbb9b547b538b385c84299189 Original-Change-Id: I2faec08d089e407c5ab9838bea980553f49821c4 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284826 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11002 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21kunimitsu: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART 1 and 2 in devicetree for kunimitsu boards. UART1 are disabled and UART2 is in PCI mode. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for kunimitsu and tested LPSS logs on Kunimitsu. Change-Id: I5a46ab9e0b792478ee2e0845aeab1443423a2fac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 38c7b963a9d679ee5106c5343e1173d0b5056627 Original-Change-Id: I39cbb6bb0991e5f9b3365adaf6b24818d112cd1a Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284825 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11001 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Sklrvp: Update Serial IO modes in devicetreeNaveen Krishna Chatradhi
This patch updates the Serial IO modes for UART 1 and 2 in devicetree for sklrvp boards. UART1 is disabled and UART2 is in PCI mode. BRANCH=None BUG=chrome-os-partner:40857 TEST=Built for sklrvp and tested LPSS logs on RVP3. Change-Id: I59a657d6a3744040ec6be290ba966672e0e5f17e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5a20a70801d66abd87d4214e1ef187b86eed99da Original-Change-Id: I381374272e1824ca8887ea5c5662215dde2c0a56 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284824 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/11000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21google/glados: add new boardPatrick Georgi
Change-Id: I0c196ff84484717c59c59d11bb7230b5920e0654 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10997 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21Skylake: Only support UART2 as debug port, clean up the restNaveen Krishna Chatradhi
On Skylake, only UART2 is supported as debug port and the macros INTEL_PCH_UART_CONSOLE_NUMBER, INTEL_PCH_UART_CONSOLE and the partial code for UART0, 1 are cleaned up for Skylake and Sklrvp, Kunimitsu and Glados boards. BRANCH=none BUG=chrome-os-partner:40857 TEST=Built for kunimitsu, checked the coreboot logs on LPSS UART2 Change-Id: I2fbcfb1d1ca6f59309a77c67d022cf4f5da7f7c0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e714c18d462bc7bdd7068309fb6be77da6973642 Original-Change-Id: I9343abd90ce685ea2d676047dccbefad7457b69f Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285793 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10994 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-21cyan/strago: Disable wwanJagadish Krishnamoorthy
Disabling the wwan gpio line since wwan is not used. BRANCH=none BUG=none TEST=wwan should not connect to network on cyan/strago. Change-Id: I9d2e5d5b185a4622218e894d3b092afe15e09289 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9a20c602b3bb768baa38b17e21cb4e5b0d9249ef Original-Change-Id: Ib8d5fd15a172ef898ce675a85c2ea3e5f5c79144 Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285304 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/10992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21Sklrvp: Select PCIEXP_L1_SUB_STATE config symbolNaveen Krishna Chatradhi
This patch selects the config symbol PCIEXP_L1_SUB_STATE to enable L1 substate for PCIe. BRANCH=None BUG=chrome-os-partner:42331 TEST=Build for sklrvp; boot and check "dmesg | grep iwl" shows "L1 enabled and LTR enabled" Change-Id: I97552c7700649a9f5d8646a03027c5c5e0b477b4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d3115816fbdd11c7f8ff418e0b5c86b8650c8b83 Original-Change-Id: Iaf307cb2d623cc1ce97b01d15a6b42569fd0c0c4 Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284775 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: http://review.coreboot.org/10988 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-21cyan: Enable EC software syncRavi Sarawadi
BUG=chrome-os-partner:40526 BRANCH=None TEST=Verify that system boots when used with coreboot and EC versions that also have Software Sync enabled. Change-Id: I6ed562fa51d83ddf16fc74d35db7c0004f57c79e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 090a66c50fac21808c4721a32b1728cc904f1b00 Original-Change-Id: Ia4d87d9a177c579567c03ae113889a277ffecee0 Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283573 Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com> Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com> Original-Reviewed-by: Shawn N <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/10985 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-18intel/kunimitsu: Fix Kconfig symbol typePatrick Georgi
BOOT_MEDIA_SPI_BUS is int, not hex. Change-Id: I5cbcc3889a025caab921208037c8a61d224078a7 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10973 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-17intel/sklrvp: remove trailing whitespacePatrick Georgi
Change-Id: If933a70992a6ae8228eef8d4f0386387b4e4549d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/10966 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-17mainboard/google: Add Braswell based Cyan boardLee Leahy
Add initial files for the cyan board. Matches chromium tree at 927026db This board uses the Braswell FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None Test=Build and run on cyan Change-Id: I935839be033c25e197e78fbee306104b4162a99a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10182 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Skylake based Kunimitsu boardLee Leahy
Initial files to support the Kunimitsu board. Matches chromium tree at 927026db This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on kunimitsu Change-Id: I1017a66bc811af51a0921e864b589ce2cb618082 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Skylake based RVP3 boardLee Leahy
Initial files to support the Intel Skylake RVP3 Matches chromium tree at 927026db This board uses the Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run on sklrvp Change-Id: I5e7fff8f62a737e627e25c1e03e343d6167041ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10343 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-17mainboard/intel: Add Braswell based Strago boardLee Leahy
Add the initial files to support the Intel RVP for Braswell. Matches chromium tree at 927026db This board uses the Braswell FSP 1.1 image and does not build without the FspUpdVpd.h file. BRANCH=none BUG=None TEST=Build and run ChromeOS on strago Change-Id: I5cb2efe3d8adf919165c62b25e08c544b316a05a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10052 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16foster: correct odmdata in odmdata.cfgYen Lin
So odmdata has the correct UART port of 0 BUG=chrome-os-partner:40741 BRANCH=None TEST=build Foster ok; and check scratch20 register Change-Id: I2c203317e6305214b74430780f2fe7b15652873a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0a0a99ac9c7db267129e4bc3478f9bb1ece08507 Original-Change-Id: I7be10d5deb5118f1cf3e339afca94893610437f2 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/280291 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10955 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: correct odmdata in odmdata.cfgYen Lin
So odmdata has the correct UART port of 0. BUG=chrome-os-partner:40741 BRANCH=None TEST=build Smaug ok; and check scratch20 register Change-Id: I59154daa5b5627d3b594ff9505e4f02de0d4d7aa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 814cd164ab9ed9bf2e072f3728e89ea8d7cf0343 Original-Change-Id: I2252b728775cf2550d666ead0085c0ab3b72e40b Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277024 Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10954 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16foster: add sdram_configs.cYen Lin
Add sdram_configs.c to both romstage and ramstage. BUG=chrome-os-partner:40741 BRANCH=None TEST=Build ok on Foster Signed-off-by: Yen Lin <yelin@nvidi.com> Change-Id: Ib270c837ebe355c8d16072186c2b27d1c469fd48 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 73bc1abf2821176c21179880774887eec7c858b1 Original-Change-Id: Ia80a57a81e44542ee3d5437866071d50c8c5b8cb Original-Reviewed-on: https://chromium-review.googlesource.com/280290 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Tom Warren <twarren@nvidia.com> Original-Tested-by: Yen Lin <yelin@nvidia.com> Original-Commit-Queue: Yen Lin <yelin@nvidia.com> Reviewed-on: http://review.coreboot.org/10951 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: ramstage: include sdram_configs.cYen Lin
get_sdram_config() (in sdram_configs.c) will be needed in ramstage. BUG=chrome-os-partner:40741 BRANCH=None TEST=Build ok on Smaug Change-Id: I2920f8687b6a801a91dc5b5b50fc5637057e4321 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4d3092e360b26cbda41549452aeeba9ffc0b92ed Original-Change-Id: I43a20f3178cbf5b57a3a9ca7391856787aa8cdb8 Original-Signed-off-by: Yen Lin <yelin@nvidia.com> Original-Reviewed-on: https://chromium-review.googlesource.com/277373 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10950 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: Use VNBN_FLASH instead of VBNV_ECFurquan Shaikh
CQ-DEPEND=CL:285312 BUG=chrome-os-partner:36613 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: Ib90333e3331a90b4539d49e1a72833fe3385879f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 042fc1a451081780f8af35af6943130f6412ca5f Original-Change-Id: I729996c04d8bd6a627421803a59037d7c47a3e98 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/285345 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10949 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16smaug: Increase drive strength for QSPI PinmuxFurquan Shaikh
Change the drive strength for QSPI Pinmux to DRIVE_STRENGTH_2 as per recommendations from nVidia hardware engineers. BUG=chrome-os-partner:41877 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: I5a7b94acb57bbc21d277a49fd0a6b892638fc0ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 58d085e6acbcd0fd355b1c7efc10606312caf8e8 Original-Change-Id: I03dd288d2e335d40c83feaec7efbf10a7d3bf1e6 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284959 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10945 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-16AMD Merlin Falcon: Mask bit 31 of BIST while doing BIST checkzbao
This is a result of the Silcon Observation. On warm reset, the BIST is 0x80000000, which causes BIST error. We skip checking this bit. The update will be in CZ BKDG 1.05. The code is tested on AMD/bettong. Change-Id: I51c3f3567f758766079f7c8789f1ff072e1a7c53 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/10902 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-14getac/p470: initialize timestamps in romstagePatrick Georgi
Change-Id: I2f43684bbdd48f30039fe09275043ddf203d447c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10907 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-14azalia: fix up and clean up shrinkage of boilerplate codeJonathan A. Kollasch
Should fix regression in HDA verb setup on nvidia mcp55 and intel sch southbridges. The mcp55 code could not find the mainboard's verb table because the table was not even being compiled in. The sch boards appeared to have the same issue. Intel broadwell and fsp_bd82x6x seemed to have not gotten the boilerplate shrink, so apply it to those too. Followup-to: Ib3e09644c0ee71aacb067adaa85653d151b52078 (azalia: Shrink boilerplate) Change-Id: If7aae69f5171db67055ffe220bdff392caaa5d9f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10826 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-13x86: flatten hierarchyStefan Reinauer
It never made sense to have bootblock_* in init, but pirq_routing.c in boot, and some ld scripts on the main level while others live in subdirectories. This patch flattens the directory hierarchy and makes x86 more similar to the other architectures. Change-Id: I4056038fe7813e4d3d3042c441e7ab6076a36384 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10901 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-07-13smaug: Set LDO2 voltage to 1.8VFurquan Shaikh
LDO2 regulator is used as an always-on reference for the droop alert circuit. Set output voltage to match kernel settings. CQ-DEPEND=CL:284649 BUG=chrome-os-partner:42305 BRANCH=None TEST=Compiles successfully and boots to kernel prompt Change-Id: I5ef4e266d8ec278dadffa846af8dc49b6d18c37e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 611465f6248cba0ddce0083b431cb7ee17bc4b4c Original-Change-Id: I58cc473452b871392d813387707a0b8288e46561 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/284879 Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10900 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-07-09veyron_{brain,danger,mickey,romy}: Select PHYSICAL_REC_SWITCHDavid Hendricks
BUG=chrome-os-partner:42220 BRANCH=veyron TEST=Used physical recovery button to enter dev mode on mickey Change-Id: I78332f516b042be9c0cef6d8a59af44b670fc260 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4fcd79a133dc750dffd5d23e0b84a109e7b7cb8d Original-Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/283546 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10844 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-09smaug: Update PMIC settingsFurquan Shaikh
Update PMIC settings as per table provided by hardware eng team. Change-Id: I17a8a1a44fa8c9093e13e8d7e4a2f5b07a3b1f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c49afd0d1a17b73f2192206ff7389e2f7930fec Original-Change-Id: I027febb6849f1c4d15bf56d8bcd29c431655c7b6 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283543 Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10843 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-09veyron_danger: Enable developer mode switchDavid Hendricks
Danger has a physical developer mode switch, it was just never set up. This patch defines it, sets it up in fill_lb_gpios(), and disables VIRTUAL_DEV_SWITCH. Note: For now at least, dev mode is a bit wonky on Danger. It's connected to both a DIP switch and a button. The button is normally open, pulling dev mode high (defaulting to ON). The switch's "ON" position will pull the value low, so we invert the value in coreboot to see the expected behavior. Dev mode is enabled by holding the button down during boot or by setting switch 2 in the DIP bank to the ON position. BUG=none BRANCH=none TEST=toggled dev switch on Danger and saw dev screen show up (or not) as expected Change-Id: I9369b96b6c9b54553d969b919ed663abdc704dd2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dce53f1a31919f15f6e46c4a7d1c5ce541c2b318 Original-Change-Id: I737f165d7704e2f73375099367f012b365e3e77d Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/280852 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10839 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-07marvel/bg4cd: move timestamp init to SoC codePatrick Georgi
No need to repeat this in the mainboard code (even if there's only one right now). Change-Id: Iaa3508c27f8c38cfa343ab1d8a094ce922dec157 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/10825 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-07rk3288: Use timestamp region for pre-cbmem timestampsFurquan Shaikh
BUG=None BRANCH=None TEST=Compiles successfully for veyron_pinky Original-Change-Id: I3862e9bf2c32085c921adae4c1dcdf88ff0f3ff3 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/227243 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 0fabdbb05826160beb8ee8f89339b18a49e87ab8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4504d29a43084d4bd406626899b25903200fa6d7 Reviewed-on: http://review.coreboot.org/10740 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-07x86: Drop -Wa,--divideStefan Reinauer
Fix up all the code that is using / to use >> for divisions instead. Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10819 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-07amd/lamar: drop unused value from mainboard_intr_data[]Stefan Reinauer
This value is overwritten in the next line. Change-Id: I622c35b8d78f6b01f2532dd8b40db15b2e888f58 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10822 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07mainboard/msi/ms7135: remove bogus MADT IRQ override for timerJonathan A. Kollasch
Stops Linux from complaining: [0.097286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [0.100005] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [0.100005] ...trying to set up timer (IRQ0) through the 8259A ... [0.100005] ..... (found apic 0 pin 0) ... [0.143507] ....... works. Change-Id: Ic09a6940f80e3da2c1f3c0ef04fb50a4096b7943 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10642 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-06veyron*: Kill SKIP_DISPLAY_INIT_HACKDavid Hendricks
Now that we have functioning display code for all platforms, we can just get rid of this ugly hack used on non-Chromebook veyrons. BUG=none BRANCH=none TEST=built for Brain, Rialto, Mickey, Romy Change-Id: Ibe248c7cc74940811345c249d66992d74fe85fe5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c627b087ba9fc07b4ec4a6d55d2e0203bdd4ff5 Original-Change-Id: I946eddb4e8ce1dbaa20212a2bb417e71a31b2ba3 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282049 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10785 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-06veyron_rialto: Use VOP_MODE_NONE for display init.David Hendricks
This uses VOP_MODE_NONE for display init on veyron_rialto and adds a mainboard_power_on_backlight() stub so that we can finally get rid of SKIP_DISPLAY_INIT_HACK. BUG=none BRANCH=none TEST=built for veyron_rialto Change-Id: Ia6b420a962fe266e773c804b8e5c68da35848753 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a290c938c163759a3672c07d8ec7c0a38057b13d Original-Change-Id: Iec2d7f03857198a4d6f7490db1e3e19c74f18c43 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282048 Reviewed-on: http://review.coreboot.org/10784 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06veyron_brain: Add basic HDMI supportDavid Hendricks
This adds a configure_hdmi() function that drives the HDMI enable output high and configures the iomux. Calls to PMIC functions to enable HDMI power are moved here as well. BUG=none BRANCH=none TEST=with follow-up patches, we now get a dev screen on Brain. Change-Id: Ifd2648376c789fb29c9e2e4ab6bdb10ca439e4a2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 91ec6a96edaf2042236aee0383e18715014f1013 Original-Change-Id: I0c6e9f8fc5e06f53a1a160d8ab2e32447168139e Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282046 Reviewed-on: http://review.coreboot.org/10778 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-06veyron_*: Set vop_mode in devicetree.cb filesDavid Hendricks
This avoids any ambiguity or breakage in case the vop_modes get shuffled around or changed in some future patch or copy+paste job. Brain and Rialto need some more work done so their devicetree.cb files will be updated in follow-up patches. BUG=none BRANCH=none TEST=compiled only (for danger, jerry, mickey, romy, speedy) Change-Id: I4fd549c82c8a5c31525c4e485fa8df73f33f2049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd88973b53949058331613c7582650fbd4ea48db Original-Change-Id: I47da45c5fd9648544392de8d76f86af812de9093 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282610 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10776 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06veyron_danger: EDP changes for v2David Hendricks
EDP-related hardware modifications for v2: - BL_EN moved from GPIO7_A3 to GPIO7_A2 - EDP_HPD added to GPIO7_B3 BUG=none BRANCH=none TEST=built and booted Danger v2 with EDP panel attached, saw dev mode screen come up Change-Id: I47383610082b371a612aced656e56f1bd1cfa098 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fb939ff17cca7bbd24aabfdb3cbd444696a5a845 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id271cdcfcde6fa84c1bb707b9842bddd77a7121b Original-Reviewed-on: https://chromium-review.googlesource.com/280855 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10771 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-05nvidia/l1_2pvv: whitespace: remove spaces that are followed by tabJonathan A. Kollasch
Change-Id: Ia84df2f4467e102fd5f675dba6432996584d78c1 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10796 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2015-07-04Kconfig: Fix references to obsolete symbolsMartin Roth
These are all Kconfig symbols that have been removed or renamed. USE_PRINTK_IN_CAR was removed in commit 8c4f31b3 Drop the USE_PRINTK_IN_CAR option. It's a bogus decision... DYNAMIC_CBMEM was removed in commit e2b0affd Remove Kconfig variable that has no effect MAINBOARD_HAS_BOOTBLOCK_INIT was removed in commit 342535cc Remove Kconfig variable that has no effect CACHE_ROM was removed in commit 4337020b Remove CACHE_ROM. SMM_MODULES was removed in commit 44cbe10f smm: Merge configs SMM_MODULES and SMM_TSEG INCLUDE_MICROCODE_IN_BUILD was removed in commit eb73a218 soc/fsp_baytrail: Fix use of microcode-related Kconfig variables CAR_MIGRATION was removed in commit cbf5bdfe CBMEM: Always select CAR_MIGRATION REQUIRES_BLOB was removed in commit 70c85eab build system: Retire REQUIRES_BLOB CPU_MICROCODE_IN_CBFS was renamed to SUPPORT_CPU_UCODE_IN_CBFS in commit 66e0c4c8 - cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFS CONSOLE_SERIAL_UART was renamed to CONSOLE_SERIAL in commit afa7b13b uart: Redefine Kconfig options CONSOLE_SERIAL8250MEM was renamed to DRIVERS_UART_8250MEM in commit afa7b13b - uart: Redefine Kconfig options Change-Id: I8952ca8c53ac2e6cec5f9c77d2f413f086bfab9d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10766 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-03hp/pavilion_m6_1035dx: Remove 'select USBDEBUG_IN_ROMSTAGE'Kimarie Hoot
Since USBDEBUG is not selected by this platform, there is no benefit to selecting USBDEBUG_IN_ROMSTAGE in the mainboard Kconfig. Further, using a 'select' for USBDEBUG_IN_ROMSTAGE prevents the value from being modified by a user in menuconfig. Change-Id: I67b71a724a8614882cff4bb43b042f0c092d11d2 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/10671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-03Kconfig whitespace cleanup: Change leading spaces to tabsMartin Roth
Change-Id: Icab6bd9f55f086da7b51ae463f34e29366d50e1a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10764 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-03storm: Enable DRIVER_UART since we use CONSOLE_CBMEM_DUMP_TO_UARTStefan Reinauer
This fixes the build with CONSOLE_CBMEM_DUMP_TO_UART. Change-Id: Ibe79239c5799a5c4a08ed195fce4d0c63d629ca4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10769 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-02tegra124: verified boot fixupsStefan Reinauer
This patch fixes up verified boot (vboot2) configuration of all tegra 124 bases boards in the tree. Change-Id: I81f2e83821cbfdbe2a55095543e7447efdde494e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10761 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-02purin: chromeos.c also needed in romstageStefan Reinauer
Otherwise the Chrome OS build won't succeed. Change-Id: Idf93a09f53d08b6c201f1de140f0fff35f928dcc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10760 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 20:45:17 +0000