summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-05-22mb/lenovo/x220: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad X220 can be controlled through the OS. This was initially done for the X201 in f63fbdb6: mb/lenovo/x201: Add support for ThinkLight. After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own an X220 to test this. Change-Id: Icead793694475e2f63353690203790ab7ce7c597 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40668 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/lenovo/t420: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T420 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T420 to test this. Change-Id: I4f9a9937a45995b72a9712919316e95bb8f82f45 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-22mb/google/volteer: Add SoundWire codecs to volteer variantDuncan Laurie
Enable drivers for SoundWire codecs and define the topology in the devicetree for the volteer variant with the SoundWire daughter board connected. +------------------+ +-------------------+ | | | Headphone Codec | | Intel Tigerlake | +--->| Realtek ALC5682 | | SoundWire | | | ID 1 | | Controller | | +-------------------+ | | | | Link 0 +----+ +-------------------+ | | | Left Speaker Amp | | Link 1 +----+--->| Maxim MAX98373 | | | | | ID 3 | | Link 2 | | +-------------------+ | | | | Link 3 | | +-------------------+ | | | | Right Speaker Amp | +------------------+ +--->| Maxim MAX98373 | | ID 7 | +-------------------+ This was tested by booting the firmware and dumping the SSDT table to ensure that all SoundWire ACPI devices are created as expected with the properties that are defined in coreboot under \_SB.PCI0: HDAS - Intel Tigerlake HDA PCI device HDAS.SNDW - Intel Tigerlake SoundWire Controller HDAS.SNDW.SW01 - Realtek ALC5682 - Headphone Codec HDAS.SNDW.SW13 - Maxim MAX98373 - Left Speaker Amp HDAS.SNDW.SW17 - Maxim MAX98373 - Right Speaker Amp BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I7782059807416369e0e1ba0d4d7c79dcab0fcbc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40894 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-22mb/google/volteer: Add overridetree.cb for volteer variantDuncan Laurie
Instead of only using the baseboard devicetree add a placeholder overridetree for volteer and refer to it in Kconfig. This will allow us to add the volteer specific devices here instead of at the baseboard level. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I7788a5473fc2275a9791fb27e0e4018a0efcd0f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40893 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: set DRAM Max Cycle Time to 15Nick Vaccaro
The DRAM Max Cycle Time (tCKmax) for Samsung's K4UBE3D4AA-MGCL DRAM part should be set to 0xF. BUG=b:157178553, b:156555863 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a SKU4 volteer to the kernel and run "memtester 6G 100" and verify it completes successfully without error and does not crash. Change-Id: Id95b19fe261e3f57a52a43055acab99af66b14ab Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41634 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/google/volteer: fix error in generic SPDNick Vaccaro
The SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_DDP_4267.spd.hex SPD contained an incorrect SDRAM Max Cycle Time (0 instead of 0x0f). After fixing that error, I noticed that two generic SPDs could be collapsed into one, so I removed one of the duplicate generic SPDs (SPD_LPDDR4X_200b_8bank_1Rx16_16Gb_16Row_DDP_4267.spd.hex), and changed Makefile to collapse volteer's DRAM ID 2 into ID 0. BUG=b:156126658, b:156058720 TEST=Flash and boot a ripto to kernel. Also verified that ripto can boot successfully to the kernel at 4267 MT/sec with FSP built in debug mode with RMT enabled. Change-Id: Ib52bf674ebf91854d3d078015aa640aa7ee98a6f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41345 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21mb/lenovo/x230: Turn X230 into a variantBill XIE
Other variants would be added later. Change-Id: Ic6af14f0aa7a6f7378048f3c38d5713c18950366 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41509 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-21Revert "mainboard/lenovo/x230: Add ThinkPad x230s as a variant"Bill XIE
This reverts commit 6b95507ec5b087658178a325bdc68570bc48bb20, in order to recommit and review it again. Change-Id: Id4ddf99200f77016a48d02a8421d080cea492aae Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41504 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20google/trogdor: Fix ram_code and sku_id strappingsJulius Werner
I'm not quite sure what happened when we first added the code for Trogdor strappings but something clearly seems to be wrong. First of all, on newer schematics the RAM_ID_1 pin is actually pin 19, not pin 91. It only used to be 91 on rev0. Whether that was an intentional change or someone just swapped the digits on accident at some point, we're not quite sure anymore, but it seems to be 19 going forward so that is what we should be programming. (ram_code wasn't used for anything on Trogdor rev0 so we don't care about adding backwards-compatibility for that.) The sku_id pins are also somewhat out of whack: first of all, a new SKU_ID_2 pin was added for rev1 that wasn't there on rev0. Second, SKU_ID_0 is not GPIO_114. In fact, it has never been GPIO_114. I have no idea how that number got there. Anyway, fix it. (Like with the ram_code, SKU IDs were also not used for rev0 so we won't make this backwards-compatible.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia14ec74ec2f16ce2661f89d0d597a5477297ab69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-05-20mb/purism/librem_skl: select GFX_GMA_IGNORE_PRESENCE_STRAPSMatt DeVillier
Some Librem 13v4's don't have the presence straps connected, leading libgfxinit to fail to init the internal display. Select GFX_GMA_IGNORE_PRESENCE_STRAPS since all SKL/KBL Librems have an internal display so there's no adverse effect. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ib9d281b7d495c4f9a5c6fc5fdb8042b0fcbda745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41417 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/endeavour: chrontel: fix interrupt and compat stringJeff Chase
The devicetree declares the chrontel interrupt as GpioInt so the GPIO needs to be configured as such instead of routing directly to APIC. Also update the compatible string to conform to kernel standards. BUG=b:146576073 TEST=install ch7322 driver; send commands using cec-ctl and verify that the interrupt handler is called. Change-Id: I737d951db135c53deb0f3cb956f0d0f275082251 Signed-off-by: Jeff Chase <jnchase@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-20tigerlake: enable DPTF functionality for volteerSumeet R Pawnikar
Enable DPTF functionality for volteer platform BRANCH=None BUG=b:149722146 TEST=Built and tested on volteer system Change-Id: I385fb409ccd291d97369295ff99f21c9430880f9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41427 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/intel/tigerlake: Move PMC PCI resources under PMC deviceTim Wawrzynczak
Historically in coreboot, the PMC's fixed PCI resources were described by the System Agent (the MMIO resource), and eSPI/LPC (the I/O resource). This patch moves both of those to a new Intel SoC-specific function, soc_pmc_read_resources(). On TGL, this new function takes care of providing the MMIO and I/O resources for the PMC. BUG=b:156388055 TEST=verified on volteer that the resource allocator is aware of and does not touch these two resources: ("PCI: 00:1f.2 resource base fe000000 size 10000 align 0 gran 0 limit 0 flags f0000200 index 0 PCI: 00:1f.2 resource base 1800 size 100 align 0 gran 0 limit 18ff flags c0000100 index 1") Also verify that the MEM resource is described in the coreboot table: ("BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved") Verified the memory range is also untouchable from Linux: ("system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved") Change-Id: Ia7c6ae849aefaf549fb682416a87320907fb3fe3 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41385 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/volteer: Fix camera dsdt config for ov2740Daniel Kang
Link frequency and a format was not correct for volteer proto 2 ov2740 user-facing camera. The link frequency is calculated in the following way. (max frame width * max frame height * max fps * data format in bps / number of lanes / data rate) + max 35% of overhead For ov2740, (1920 * 1080 * 60 * 10 / 2 / 2) = 311Mhz. 360Mhz after adding 18% of overhead. BUG=b:148428976 BRANCH=none TEST=Build and boot volteer proto 2 board. Start a camera app and check user-facing camera functionalities. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I3b51826e123dec394c1b4eb9a1c5b64b8b11459e Reviewed-on: https://review.coreboot.org/c/coreboot/+/41157 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mainboard/volteer: Update Aux settings for Port 0Brandon Breitenstein
On Volteer port 0 (MB PORT) does not have a retimer so the port needs to be configured for the SOC to handle Aux orientation flipping. This requires 2 changes setting the TcssAuxOri UPD to 1 for port 0 (Bit 0) and configuring AUXP and AUXN GPIOs to Native Function 6 so SOC can control the orientation BUG=b:145220205 BRANCH=NONE TEST=booted Volteer proto 2 and verified that the AUX channels flip when the cable is flipped Change-Id: Ic81adc24d10322cc305bf0fa4c38514468ea0942 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-20mb/google/volteer: Enable EARLY_EC_SYNCCaveh Jalali
This enables EC software sync in romstage. BUG=b:148259137 TEST=verified EC is updated in romstage using coreboot serial console logs. Change-Id: Ibb97c1d57220f7fd74131a5aee450b1ab4b1c982 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41078 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/deltaur: Remove WLAN PCIE settingEric Lai
Deltaur uses CNVi WLAN module, this setting is not required. BUG=none TEST=WiFi is functional in OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idb23e271074c8d1e111c559695d4169af5e0d3cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/41495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-20mb/google/deltaur: Add tcss.aslEric Lai
Add tcss.asl to support TCSS power management. For the detail please refer cb:39785. BUG=none TEST=Check TBT PCIe root ports: 00:07.0/00:07.1/00:07.2/00:07.3 /sys/bus/pci/devices/bus:device:func/power suspend and active time can increase. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I432f3d6643de13b08c07e47f799c0ecdfe047de6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41506 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/deltaur: Add low power idle tableEric Lai
Add low power idle table to notify EC system is entering s0ix. BUG=none TEST=Power button and keyboard backlight are off when suspending. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icf4dffe2bd289c15854bbad914c3b34b307254ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/41494 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20mb/google/hatch: Fix Puff variants rom size from 32768 -> 16384 KBEdward O'Callaghan
Originally variants make use of a 32MB chip whereas now they use a 16MB SPI flash. Allow for the coordination of dealing with the transition between phases. V.2: Leave Puff alone at the moment due to the complexity of coordination. BUG=b:153682192 BRANCH=none TEST=none Change-Id: Ic336168ea1a0055c30f718f5540209d2cf69d029 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40897 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/lenovo/{x230, t430s}: add H8_HAS_PRIMARY_FN_KEYS for {x230s, t431s}Bill XIE
X230s and T431s have keyboard similar to the one found on t440p, so H8_HAS_PRIMARY_FN_KEYS and related cmos options may apply to them. Tested on both X230s and T431s. Change-Id: I234820b92093acdd64ff60cae39015547b6e981e Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41403 Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove unused 'include <lib.h>'Elyes HAOUAS
Change-Id: Iad5540e791075270453a136a058823c28647f93a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/google/{parrot,stout}: Remove unused 'include <elog.h>'Elyes HAOUAS
Change-Id: I7c6f47f03f1c83658f4364f81f6436d7b2f4f377 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-18mb/portwell/m107: Remove direct 'include <soc/gpio.h>'Elyes HAOUAS
Don't directly include <soc/gpio.h>. All code using GPIO features should always and only include <gpio.h>, which should indirectly include the SoC-specific <soc/gpio.h>. Change-Id: I78f1e250570f1b395c61115d4a872b24b3d58f69 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/facebook/fbg1701: Remove direct 'include <soc/gpio.h>'Elyes HAOUAS
Don't directly include <soc/gpio.h>. All code using GPIO features should always and only include <gpio.h>, which should indirectly include the SoC-specific <soc/gpio.h>. Change-Id: Id2663398b9f069ab1f60d63016ea7aa080f66d20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18mb/google/hatch: Add Mushu variant specific DPTF parametersJohn Su
The change applies the DPTF parameters received from thermal team. 1. Set PL1 Max to 25W 2. Set PL2 Max to 44W 3. Update Temp sensor parameters BUG=b:152011093 BRANCH=none TEST=build and verified by thermal team Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I225897832b02f9de6221053b68fbdba30f8b199a Reviewed-on: https://review.coreboot.org/c/coreboot/+/41165 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/deltaur: Remove DSP settingEric Lai
Deltaur does not use DSP so remove the DSP setting. BUG=b:155360937 TEST=Recording and playing are working fine in OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I01c076806448fc73980ec02e7558ccf082723d92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18mb/google/deltaur: Add audio verb tableEric Lai
Add audio verb table provided by vendor. BUG=b:156447983 TEST=Have beep sound when run "devbeep" in CLI. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I807d84de1677459ea027e645488f485b0ac7b2ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/41401 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/deltaur: Update audio settingEric Lai
Deltaur uses HDA codec so we need to set iDisplay Audio Codec disconnection and enable HdaAudioLink, otherwise the HDA codec won't respond to commands to execute HDA verbs. BUG=b:156447983 TEST=No timeout error when run "devbeep" in CLI. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I15d2895866abcf68963c9732ed5d05f32096fc92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41397 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18mb/google/dedede: update SPD name based on DRAM characteristicMarco Chen
The index of DRAM_STRAPS indicates to a specific DRAM characteristic instead of a DRAM part number therefore update the existing DRAM SPD binary to the naming by DRAM characteristic. BUG=b:152019429 BRANCH=None TEST=build the image and verify that coreboot log shows the correct SPD info Change-Id: I8ffcf156f37a465209740c5e2a34effb5f1f5d5c Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18mb/facebookmonolith: Update root port settingsWim Vervoorn
Update monolith root port settings to match those of the original BIOS. MaxPayload is set to 256 bytes, ASPM is disabled and LTR and Advanced Error reporting are enabled. BUG=N/A TEST=tested on facebook monolith Change-Id: Idf6e706d45cf1ea1aee4a75a6d0eb130b21db927 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-18mb/ripto: Update ALC5682 headset interrupt configurationsShaunak Saha
As per schematics configure headset interrupt as edge both for ripto and volteer baseboard. BUG=b:147085988 BRANCH=none TEST=Build and boot ripto board. Test that jack functionality is working fine and also confirm with evtest. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I8e1625140ccf55db8cb0fe3c039f1c31c01069b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-05-18mainboard/*/*/*.cb: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: Ia0dbf7b946d42bda11b904a9caff5a402b553b33 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-18mainboard/*/*/Kconfig*: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I7089b29e881d74d31477e2df1c5fa043fe353343 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41358 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-17mb/asus/p2b: Remove variant validation guards from DSDTKeith Hui
With conversion to variant structure complete, remove temporary guards inserted to help validate the move. With this change, all P2B family boards (currently p2b and p2b-ls) share the same S-state declarations. TEST=No apparent ACPI regression observed on p2b-ls. Change-Id: Ibd6e49adeae2a42800ee5bfd74b3850eb19843a5 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-16Revert "mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 ports"Furquan Shaikh
This reverts commit 2412924bc7646fc22b2cb1b9108413fa3e849082. Reason for revert: Resource allocator patches need to be reverted until the AMD chipsets can be fixed to handle the resource allocation flow correctly. BUG=b:149186922 Change-Id: Iea6db8cc0cb5a0e81d176ed3199c91dcd02d1859 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41411 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-16mb/dell/optiplex_9010: Add Dell OptiPlex 9010 SFF supportMichał Żygowski
Based on the autoport. The OptiPlex 9010 comes in four different sizes: MT, DT, SFF and USFF. Tested on SFF only. The other PCBs are slightly different, but they are designed with intercompatibility in mind. With small devicetree overrides it should work on OptiPlex 7010 and other OptiPlex 9010 variants as well. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I88d65cae30d08ca727d86d930707c2be25a527cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40351 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-15mb/google/volteer: Add delay to WWAN GPIO init sequenceAlex Levin
Based on Fibocom HW user manual RESET should be deasserted at least 20ms after the power on pin. The design for the reset pin is open drain connected to a pull up, so it is set to high-Z (configured as GPIO in) after 20ms. BUG=b:152013143 BRANCH=none TEST=traced the signals using a scope to verify timing is met. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I7c947d1bc4cce1f97383a2f2c254986e182661c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41356 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14trogdor: Update pull for Sd-card detect pinShaik Sajida Bhanu
Configuring pull for SD-card detect pin. Without this SD-card detection is not working as expected Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Change-Id: I77bf355a049224784a160defa6bee66d0f9ceb75 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-14sc7180: GPIO: Add I2S configuration for sc7180vsujithk
Configuring GPIO Pins as I2S mode for Audio speaker. Change-Id: I681aa6d0d57671b0fd9b7bc88de6f2cc202a7af0 Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-14mb/google/deltaur: Configure GPIO B11 as PMCALERTAnil Kumar
GPIO B11 pin should be configured as PMCALERT function. This is required for the intergrated USB-C feature to work in the SOC BUG=b:154778458, b:156288164 TEST= build and boot coreboot image on deltan. Test Type-C port enumeration on Chrome OS Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I8f995901b0a50d2c74f57aba96f86134c9d569e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41378 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-14mb/google/volteer: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 portsFurquan Shaikh
This change enables PCIEXP_HOTPLUG to support resource allocation for TCSS TBT/USB4 ports. BUG=b:149186922 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I4cb820e83da40434b00198b934453805e35ef1ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/41156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-13mainboard/lenovo/x230: Add ThinkPad x230s as a variantBill XIE
The code is based on autoport and that for X230. Major differences are: - Only one DDR3 slot - HM77 PCH - M.2 socket instead of mini pci-e - no docking - no tpm Tested: - CPU i5-3337U - Slotted DIMM 8GiB - Camera - pci-e and usb2 on M.2 slot with A key for wlan - sata and usb2 (no superspeed components) on M.2 slot with B key for wwan - On board SDHCI connected to pci-e - USB3 ports - libgfxinit-based graphic init - NVRAM options for North and South bridges - Sound - Thinkpad EC - S3 - Linux 4.9 within Debian GNU/Linux stable, loaded from Seabios. Untested: - Touch screen, which is said to work under ubuntu but not debian. Change-Id: Ie537645d5ffaee799e79af2f821f80c3ebd2dfec Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-13mb/google/puff: add a region to cache SPD dataJamie Chen
This patch adds a SPI rom region RW_SPD_CACHE on Puff and it can be used on spd_cache to reduce reading SPD data from SODIMM by smbus. It's for saving the boot time and it can be used to trigger MRC retraining when memory DIMM is changed. BUG=b:146457985 BRANCH=None TEST=Build puff successfully and verified below two items. 1. To change memory DIMM can trigger retraining. 2. one DIMM save the boot time : 158ms two DIMM save the boot time : 265ms Change-Id: I8d07fddf113a767d62394cb31e33b56f22f74351 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-13mb/google/volteer/variants/halvor: add two SPD filesNick Vaccaro
Adds SPD_LPDDR4X_556b_1R_32Gb_8GbD_QDP_4267.spd.hex, which will be used initially for the "H9HKNNNCRMBVAR-NEH" SKhynix part as DRAM ID #0. Adds SPD_LPDDR4X_556b_1R_64Gb_16GbD_QDP_4267.spd.hex, which will be used initially for the "MT53E1G64D4SQ-046 WT:A" Micron part as DRAM ID #1. BUG=b:155423877 TEST=none Change-Id: I5580f602cd411e415dafcb36bd1ffa43c4f02f60 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41076 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src/mainboard: Remove unused 'include <stdlib.h>'Elyes HAOUAS
Found using following commande: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l ' memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer/variants/volteer: Add three generic SPD filesNick Vaccaro
- Add SPD_LPDDR4X_200b_1R_16Gb_16Row_DDP_4267.spd.hex, initially used for the SKhynix H9HCNNNBKMMLXR-NEE part with DRAM ID #2 - Add SPD_LPDDR4X_200b_2R_64Gb_ODP_4267.spd.hex, initially used for the SKhynix H9HCNNNFAMMLXR-NEE part with DRAM ID #3 - Add SPD_LPDDR4X_200b_2R_32Gb_QDP_4267.spd.hex, initially used for the Micron MT53E1G32D2NP-046 WT:A part with DRAM ID #4 BUG=b:147857288 TEST=none Change-Id: I60d8bb05a4d6d3608adc7de69efc8623d1ca610d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41126 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stddef.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l 'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\ |MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stdint.h>'Elyes HAOUAS
unused includes of <stdin.h> found using following commande: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|uint8_t\|int16_t\|uint16_t\|int32_t\|uint32_t\|int64_t\| uint64_t\|intptr_t\|uintptr_t\|intmax_t\|uintmax_t\|s8\|u8\|s16\| u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|UINT8_MAX\|INT16_MIN\ |INT16_MAX\|UINT16_MAX\|INT32_MIN\|INT32_MAX\|UINT32_MAX\|INT64_MIN\ |INT64_MAX\|UINT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|UINTMAX_MAX' -- src/) |grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Icb9b54c6abfb18d1e263665981968a4d7cccabeb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41148 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13ec/lenovo/h8: Reintroduce h8_mb_init() for specific boardsBill XIE
Mainboard specific dock-init mechanism introduced https://review.coreboot.org/c/coreboot/+/36093 works on most boards, but https://ticket.coreboot.org/issues/256 shows that some boards (e.g. x201 and t410) need communication with h8 EC to enable or disable dock, (in dock_connect() and dock_disconnect() respectively) so they must be done after the h8 EC is brought up, which is not garanteed in the above mainboard specific dock-init mechanism. This time, a hook function h8_mb_init() will be called at the end of h8_enable(). (in place of the ancient h8_mainboard_init_dock() removed in CB:36093) Its default implementation is a weak empty function, but could be overrided with a strong one for boards needing to perform actions which should be done after h8 EC is brought up. This should fix the regression detected in https://ticket.coreboot.org/issues/256 Change-Id: I3674fbfeab2ea2cd2a4453a8e77521157d553388 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-13mb/google/volteer: move SPD files to variant directoriesNick Vaccaro
Memory SPD files for each variant are now stored in the variant's mb/google/volteer/variants/<variant_name>/spd directory instead of storing them in mb/google/volteer/spd. This change moves SPDs to where they are needed and changes the makefile to look for them in their new locations. BUG=b:156126658 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot a proto2 SKU4 to the kernel. Change-Id: I759c979027477a2a4c5489a6b12278799488d6e7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41184 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13mb/google/volteer: Enable keyboard backlight featureAngel Pons
This enables the keyboard backlight feature in ACPI for volteer. BUG=b:156326050 TEST=Verified 'KBLT' shows up in the DSDT ACPI table. Change-Id: Id1b1bb059368b0cc36cb06e6cdb8b989060a1dde Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-13mb/google/dedede/variants/waddledoo: Modify ELAN touchscreen slave addressIan Feng
Modify ELAN EKTH6918 USI touchscreen slave address to 0x10. BUG=b:152936745 TEST="emerge-dedede coreboot chromeos-bootimage", build successful. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I999967b0f37c82ff7811e3b6117baab795a11195 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-13mb/google/octopus/variants/foob: Disable xHCI compliance modeTommie
When any USB image disk is connected to the DUT through HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen, it cannot boot from USB. We found the SS hub cannot be enumerated. So disable xHCI compliance mode. BRANCH=octopus BUG=b:155347573 TEST=Confirm successful boot from USB Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2 Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12mb/intel/jasperlake_rvp: Remove SataEnable deviceetree configRonak Kanabar
SataEnable UPD override will be filled using devicetree pci device status check. Change-Id: I957dfcf139acd4f4dd5723bc1b010ec45ec91651 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41227 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12Revert "mb/{lenovo/x201,packardbell/ms2290}/acpi: Use GOS method"Nico Huber
This reverts commit b3100775ae29caebd068db8f6209561abda2fb0c. This was part of a series that moved things to common code and causes regressions. Change-Id: I239906e498c8352e6880408744f176a8aeb13dc8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-12trogdor: Add support for rev1Julius Werner
This patch implements the pin changes needed for Trogdor rev1. Unfortunately, coreboot has to get the EC and TPM SPI busses compiled into Kconfig, so we cannot really build a single image that runs on both revisions. Introduce a Kconfig to handle this instead. Change-Id: I2e48dc4565682c12089b6cf92c29f4cef4d61bb8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11trogdor: Latch GPIO interrupt supportrbokka
Required for TPM IRQ. Change-Id: I8198213cf2808be5291620892185b1e534263e3f Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38714 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11trogdor: mainboard reference all QUPv3 FW driversT Michael Turney
Change-Id: I8ff5dd63fac28ffa558aec71e79a6de87d7885e0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37306 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Convert more license headers to SPDX stylePatrick Georgi
Change-Id: Ia3de79c7d71049da00ed108829eac6cb49ff3ed6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41205 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Replace BSD-3-Clause and ISC headers with SPDX headersPatrick Georgi
Commands used: perl -i -p0e 's|\/\*[*\s]*Permission[*\s]*to[*\s]*use,[*\s]*copy,[*\s]*modify,[*\s]*and.or[*\s]*distribute[*\s]*this[*\s]*software[*\s]*for[*\s]*any[*\s]*purpose[*\s]*with[*\s]*or[*\s]*without[*\s]*fee[*\s]*is[*\s]*hereby[*\s]*granted,[*\s]*provided[*\s]*that[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice[*\s]*and[*\s]*this[*\s]*permission[*\s]*notice[*\s]*appear[*\s]*in[*\s]*all[*\s]*copies.[*\s]*THE[*\s]*SOFTWARE[*\s]*IS[*\s]*PROVIDED[*\s]*.*AS[*\s]*IS.*[*\s]*AND[*\s]*THE[*\s]*AUTHOR[*\s]*DISCLAIMS[*\s]*ALL[*\s]*WARRANTIES[*\s]*WITH[*\s]*REGARD[*\s]*TO[*\s]*THIS[*\s]*SOFTWARE[*\s]*INCLUDING[*\s]*ALL[*\s]*IMPLIED[*\s]*WARRANTIES[*\s]*OF[*\s]*MERCHANTABILITY[*\s]*AND[*\s]*FITNESS.[*\s]*IN[*\s]*NO[*\s]*EVENT[*\s]*SHALL[*\s]*THE[*\s]*AUTHOR[*\s]*BE[*\s]*LIABLE[*\s]*FOR[*\s]*ANY[*\s]*SPECIAL,[*\s]*DIRECT,[*\s]*INDIRECT,[*\s]*OR[*\s]*CONSEQUENTIAL[*\s]*DAMAGES[*\s]*OR[*\s]*ANY[*\s]*DAMAGES[*\s]*WHATSOEVER[*\s]*RESULTING[*\s]*FROM[*\s]*LOSS[*\s]*OF[*\s]*USE,[*\s]*DATA[*\s]*OR[*\s]*PROFITS,[*\s]*WHETHER[*\s]*IN[*\s]*AN[*\s]*ACTION[*\s]*OF[*\s]*CONTRACT,[*\s]*NEGLIGENCE[*\s]*OR[*\s]*OTHER[*\s]*TORTIOUS[*\s]*ACTION,[*\s]*ARISING[*\s]*OUT[*\s]*OF[*\s]*OR[*\s]*IN[*\s]*CONNECTION[*\s]*WITH[*\s]*THE[*\s]*USE[*\s]*OR[*\s]*PERFORMANCE[*\s]*OF[*\s]*THIS[*\s]*SOFTWARE.[*\s]*\*\/|/* SPDX-License-Identifier: ISC */|s' $(cat filelist) perl -i -p0e 's|(\#\#*)\s*Permission[\#\s]*to[\#\s]*use,[\#\s]*copy,[\#\s]*modify,[\#\s]*and.or[\#\s]*distribute[\#\s]*this[\#\s]*software[\#\s]*for[\#\s]*any[\#\s]*purpose[\#\s]*with[\#\s]*or[\#\s]*without[\#\s]*fee[\#\s]*is[\#\s]*hereby[\#\s]*granted,[\#\s]*provided[\#\s]*that[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice[\#\s]*and[\#\s]*this[\#\s]*permission[\#\s]*notice[\#\s]*appear[\#\s]*in[\#\s]*all[\#\s]*copies.[\#\s]*THE[\#\s]*SOFTWARE[\#\s]*IS[\#\s]*PROVIDED[\#\s]*.*AS[\#\s]*IS.*[\#\s]*AND[\#\s]*THE[\#\s]*AUTHOR[\#\s]*DISCLAIMS[\#\s]*ALL[\#\s]*WARRANTIES[\#\s]*WITH[\#\s]*REGARD[\#\s]*TO[\#\s]*THIS[\#\s]*SOFTWARE[\#\s]*INCLUDING[\#\s]*ALL[\#\s]*IMPLIED[\#\s]*WARRANTIES[\#\s]*OF[\#\s]*MERCHANTABILITY[\#\s]*AND[\#\s]*FITNESS.[\#\s]*IN[\#\s]*NO[\#\s]*EVENT[\#\s]*SHALL[\#\s]*THE[\#\s]*AUTHOR[\#\s]*BE[\#\s]*LIABLE[\#\s]*FOR[\#\s]*ANY[\#\s]*SPECIAL,[\#\s]*DIRECT,[\#\s]*INDIRECT,[\#\s]*OR[\#\s]*CONSEQUENTIAL[\#\s]*DAMAGES[\#\s]*OR[\#\s]*ANY[\#\s]*DAMAGES[\#\s]*WHATSOEVER[\#\s]*RESULTING[\#\s]*FROM[\#\s]*LOSS[\#\s]*OF[\#\s]*USE,[\#\s]*DATA[\#\s]*OR[\#\s]*PROFITS,[\#\s]*WHETHER[\#\s]*IN[\#\s]*AN[\#\s]*ACTION[\#\s]*OF[\#\s]*CONTRACT,[\#\s]*NEGLIGENCE[\#\s]*OR[\#\s]*OTHER[\#\s]*TORTIOUS[\#\s]*ACTION,[\#\s]*ARISING[\#\s]*OUT[\#\s]*OF[\#\s]*OR[\#\s]*IN[\#\s]*CONNECTION[\#\s]*WITH[\#\s]*THE[\#\s]*USE[\#\s]*OR[\#\s]*PERFORMANCE[\#\s]*OF[\#\s]*THIS[\#\s]*SOFTWARE.\s(\#* *\n)*|\1 SPDX-License-Identifier: ISC\n\n|s' $(cat filelist) perl -i -p0e 's|\/\*[*\s]*Redistribution[*\s]*and[*\s]*use[*\s]*in[*\s]*source[*\s]*and[*\s]*binary[*\s]*forms,[*\s]*with[*\s]*or[*\s]*without[*\s]*modification,[*\s]*are[*\s]*permitted[*\s]*provided[*\s]*that[*\s]*the[*\s]*following[*\s]*conditions[*\s]*are[*\s]*met:[*\s]*[1. ]*Redistributions[*\s]*of[*\s]*source[*\s]*code[*\s]*must[*\s]*retain[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice,[*\s]*this[*\s]*list[*\s]*of[*\s]*conditions[*\s]*and[*\s]*the[*\s]*following[*\s]*disclaimer.[*\s]*[*\s]*[2. ]*Redistributions[*\s]*in[*\s]*binary[*\s]*form[*\s]*must[*\s]*reproduce[*\s]*the[*\s]*above[*\s]*copyright[*\s]*notice,[*\s]*this[*\s]*list[*\s]*of[*\s]*conditions[*\s]*and[*\s]*the[*\s]*following[*\s]*disclaimer[*\s]*in[*\s]*the[*\s]*documentation[*\s]*and.or[*\s]*other[*\s]*materials[*\s]*provided[*\s]*with[*\s]*the[*\s]*distribution.[*\s]*[3. ]*.*used[*\s]*to[*\s]*endorse[*\s]*or[*\s]*promote[*\s]*products[*\s]*derived[*\s]*from[*\s]*this[*\s]*software[*\s]*without[*\s]*specific[*\s]*prior[*\s]*written[*\s]*permission.[*\s]*THIS[*\s]*SOFTWARE[*\s]*IS[*\s]*PROVIDED.*AS[*\s]*IS.*[*\s]*AND[*\s]*ANY[*\s]*EXPRESS[*\s]*OR[*\s]*IMPLIED[*\s]*WARRANTIES,[*\s]*INCLUDING,[*\s]*BUT[*\s]*NOT[*\s]*LIMITED[*\s]*TO,[*\s]*THE[*\s]*IMPLIED[*\s]*WARRANTIES[*\s]*OF[*\s]*MERCHANTABILITY.*FITNESS[*\s]*FOR[*\s]*A[*\s]*PARTICULAR[*\s]*PURPOSE.*ARE[*\s]*DISCLAIMED.[*\s]*IN[*\s]*NO[*\s]*EVENT[*\s]*SHALL.*LIABLE[*\s]*FOR[*\s]*ANY[*\s]*DIRECT,[*\s]*INDIRECT,[*\s]*INCIDENTAL,[*\s]*SPECIAL,[*\s]*EXEMPLARY,[*\s]*OR[*\s]*CONSEQUENTIAL[*\s]*DAMAGES[*\s]*.INCLUDING,[*\s]*BUT[*\s]*NOT[*\s]*LIMITED[*\s]*TO,[*\s]*PROCUREMENT[*\s]*OF[*\s]*SUBSTITUTE[*\s]*GOODS[*\s]*OR[*\s]*SERVICES;[*\s]*LOSS[*\s]*OF[*\s]*USE,[*\s]*DATA,[*\s]*OR[*\s]*PROFITS;[*\s]*OR[*\s]*BUSINESS[*\s]*INTERRUPTION.[*\s]*HOWEVER[*\s]*CAUSED[*\s]*AND[*\s]*ON[*\s]*ANY[*\s]*THEORY[*\s]*OF[*\s]*LIABILITY,[*\s]*WHETHER[*\s]*IN[*\s]*CONTRACT,[*\s]*STRICT[*\s]*LIABILITY,[*\s]*OR[*\s]*TORT[*\s]*.INCLUDING[*\s]*NEGLIGENCE[*\s]*OR[*\s]*OTHERWISE.[*\s]*ARISING[*\s]*IN[*\s]*ANY[*\s]*WAY[*\s]*OUT[*\s]*OF[*\s]*THE[*\s]*USE[*\s]*OF[*\s]*THIS[*\s]*SOFTWARE,[*\s]*EVEN[*\s]*IF[*\s]*ADVISED[*\s]*OF[*\s]*THE[*\s]*POSSIBILITY[*\s]*OF[*\s]*SUCH[*\s]*DAMAGE.[*\s]*\*\/|/* SPDX-License-Identifier: BSD-3-Clause */|s' $(cat filelist) $1 perl -i -p0e 's|(\#\#*) *Redistribution[\#\s]*and[\#\s]*use[\#\s]*in[\#\s]*source[\#\s]*and[\#\s]*binary[\#\s]*forms,[\#\s]*with[\#\s]*or[\#\s]*without[\#\s]*modification,[\#\s]*are[\#\s]*permitted[\#\s]*provided[\#\s]*that[\#\s]*the[\#\s]*following[\#\s]*conditions[\#\s]*are[\#\s]*met:[\#\s]*[*1. ]*Redistributions[\#\s]*of[\#\s]*source[\#\s]*code[\#\s]*must[\#\s]*retain[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice,[\#\s]*this[\#\s]*list[\#\s]*of[\#\s]*conditions[\#\s]*and[\#\s]*the[\#\s]*following[\#\s]*disclaimer.[\#\s]*[*2. ]*Redistributions[\#\s]*in[\#\s]*binary[\#\s]*form[\#\s]*must[\#\s]*reproduce[\#\s]*the[\#\s]*above[\#\s]*copyright[\#\s]*notice,[\#\s]*this[\#\s]*list[\#\s]*of[\#\s]*conditions[\#\s]*and[\#\s]*the[\#\s]*following[\#\s]*disclaimer[\#\s]*in[\#\s]*the[\#\s]*documentation[\#\s]*and.or[\#\s]*other[\#\s]*materials[\#\s]*provided[\#\s]*with[\#\s]*the[\#\s]*distribution.[\#\s]*[\#\s]*[*3. ]*.*used[\#\s]*to[\#\s]*endorse[\#\s]*or[\#\s]*promote[\#\s]*products[\#\s]*derived[\#\s]*from[\#\s]*this[\#\s]*software[\#\s]*without[\#\s]*specific[\#\s]*prior[\#\s]*written[\#\s]*permission.[\#\s]*THIS[\#\s]*SOFTWARE[\#\s]*IS[\#\s]*PROVIDED.*AS[\#\s]*IS.*[\#\s]*AND[\#\s]*ANY[\#\s]*EXPRESS[\#\s]*OR[\#\s]*IMPLIED[\#\s]*WARRANTIES,[\#\s]*INCLUDING,[\#\s]*BUT[\#\s]*NOT[\#\s]*LIMITED[\#\s]*TO,[\#\s]*THE[\#\s]*IMPLIED[\#\s]*WARRANTIES[\#\s]*OF[\#\s]*MERCHANTABILITY.*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.*ARE[\#\s]*DISCLAIMED.[\#\s]*IN[\#\s]*NO[\#\s]*EVENT[\#\s]*SHALL.*LIABLE[\#\s]*FOR[\#\s]*ANY[\#\s]*DIRECT,[\#\s]*INDIRECT,[\#\s]*INCIDENTAL,[\#\s]*SPECIAL,[\#\s]*EXEMPLARY,[\#\s]*OR[\#\s]*CONSEQUENTIAL[\#\s]*DAMAGES[\#\s]*.INCLUDING,[\#\s]*BUT[\#\s]*NOT[\#\s]*LIMITED[\#\s]*TO,[\#\s]*PROCUREMENT[\#\s]*OF[\#\s]*SUBSTITUTE[\#\s]*GOODS[\#\s]*OR[\#\s]*SERVICES;[\#\s]*LOSS[\#\s]*OF[\#\s]*USE,[\#\s]*DATA,[\#\s]*OR[\#\s]*PROFITS;[\#\s]*OR[\#\s]*BUSINESS[\#\s]*INTERRUPTION.[\#\s]*HOWEVER[\#\s]*CAUSED[\#\s]*AND[\#\s]*ON[\#\s]*ANY[\#\s]*THEORY[\#\s]*OF[\#\s]*LIABILITY,[\#\s]*WHETHER[\#\s]*IN[\#\s]*CONTRACT,[\#\s]*STRICT[\#\s]*LIABILITY,[\#\s]*OR[\#\s]*TORT[\#\s]*.INCLUDING[\#\s]*NEGLIGENCE[\#\s]*OR[\#\s]*OTHERWISE.[\#\s]*ARISING[\#\s]*IN[\#\s]*ANY[\#\s]*WAY[\#\s]*OUT[\#\s]*OF[\#\s]*THE[\#\s]*USE[\#\s]*OF[\#\s]*THIS[\#\s]*SOFTWARE,[\#\s]*EVEN[\#\s]*IF[\#\s]*ADVISED[\#\s]*OF[\#\s]*THE[\#\s]*POSSIBILITY[\#\s]*OF[\#\s]*SUCH[\#\s]*DAMAGE.\s(\#* *\n)*|\1 SPDX-License-Identifier: BSD-3-Clause\n\n|s' $(cat filelist) Change-Id: I7ff9c503a2efe1017a4666baf0b1a758a04f5634 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mainboard/asus/p3b-f: Reintroduce as variant of p2bKeith Hui
Fold this last ASUS 440BX board into the P2B family, while bringing in some changes: - Devicetree becomes overridetree. - Remove non-existent IR device and disable ACPI device on Super I/O to match OEM firmware. - Add SB GPO settings from OEM firmware to devicetree. This disables the SPD enabling magic this board needs. By moving the enabling part to bootblock the hacky enable_spd hook can be eliminated. - Initialize the serial port in bootblock, like the other boards. Boot tested on hardware. Change-Id: I65f2cb9d1bd4c82550de43889e3502526a46bd18 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41047 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mb/google/cyan/*: fixup GPIOsMatt DeVillier
Commit 73b723d [google/cyan: Switch Touchpad and Touchscreen...] in additon to changing the touchpad/touchscreen interrupts from edge to level triggered, also marked them as maskable. This was partially reverted in a86bbea0 [google/cyan: set touchscreen GPIO to non_maskable], but did not resolve all of the issues. Additionally, 73b723d also accidentally changed the pad interrupt select from L3 to L1 for all touchscreen GPIOs. Clean up this mess by setting all touchpad/touchscreen GPIOs back to maskable, and set the pad level to L3 for all touchscreen GPIOs. Tested on several cyan variants Change-Id: I70e8e2d4ff317c3b9b4108ed6c5bc80e9b0bbc75 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-11mb/google/octopus/variants/dood: Disable XHCI LFPS power managementKenneth Chan
LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] are set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2020-05-11mb/intel/jasperlake_rvp: Turn off unused I2C lanesPandya, Varshit B
Change-Id: Id49032c0f9b701fe12873c80e1bc0e4b64ba7106 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-11mb/intel/jasperlake_rvp: Add support for SMI handlerMaulik V Vaghela
SMI handler was not present in jasperlake rvp to handle wake events when platform goes to sleep or shutdown or s0ix. Adding this support for board which supports chromeec. BUG=None BRANCH=None TEST=Check wake event on board and platform wakes up due to events lid wake event or power button press. Change-Id: I8e35955b06d6efaf9275ec03f519c9bcaa9ba345 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-11mb/google/kukui: fix screen scrolling on devices using anx7625Paul Ma
anx7625 enables MIPI receiver to check EOTP packet as default. If MIPI_DSI_MODE_EOT_PACKET is not set in flags, soc dsi will not send out EOTP packet and some panel models will display abnormal such as scrolling all the time. BUG=b:144824303 BRANCH=kukui TEST=boot damu board, edp panel with anx7625 as bridge boots up without scrolling. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: Iad651202bde2a40024af8c12153143ada2ce2439 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41161 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mb/google/kukui: Fix backlight flash white before show logoJitao Shi
Turn backlight off before panel poweron. BUG=b:155107047 TEST=make # board = kukui BRANCH=kukui Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I0f31923bd7c1dfa26d4b1bbd0a230ae400b08ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41146 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11mb/google/octopus: Fix default FMDMatt DeVillier
On Apollo Lake/Gemini Lake platforms, FSP requires more than a simple RW_MRC_CACHE; without the RECOVERY and VAR cache regions, FSP-m will fail on s3 resume and trigger a full reset instead. This fixes the default.fmd for octopus to match that used for reef. Test: build/boot google/ampton, verify sleep/resume works under Linux with 5.x kernel. Change-Id: I8565aa93256df7d6e0b359d70e9305f34e5ccb60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-10mb/google/kahlee: Hold WLAN PCIe reset low at boot for mordinKevin Chiu
gpio70 is assigned to use as WLAN rst in new schematic to fulfill RTK RTL8822CE power sequence: WLAN rst will need to be active at least 50ms after WLAN power on. Also in order to keep the rst low in consistency, override default gpio70 to low. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I98c8afe42b7f92016f83483acbb3b9ae64b159f7 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40805 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-10mb/google/kahlee: Don't reset the touchpad/screen on bootMartin Roth
touchpad & touchscreen power enable gets reset during resume causing unintended wake interrupts, causing dark resume failures. This prevents the board from being shut down after it's been suspended for a long period of time and can end up draining the battery. BUG=b:153173717 TEST=Build only - Needs to be tested by ODMs. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If403da8853e59eaaf589062c9bd6f10deb626998 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
2020-05-10src/mainboard: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I64d9468682a4aae3084b17b8724d035f17d01dff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-09src/: Replace GPL boilerplate with SPDX headerPatrick Georgi
Command used: perl -i -p0e 's|(\#\#*)[\w*]*.*is[\#\s]*licensed[\#\s]*under[\#\s]*the[\#\s]*terms[\#\s]*of[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*version[\#\s]*2,[\#\s]*as[\#\s]*published[\#\s]*by[\#\s]*the[\#\s]*Free[\#\s]*Software[\#\s]*Foundation,[\#\s]*and[\#\s]*may[\#\s]*be[\#\s]*copied,[\#\s]*distributed,[\#\s]*and[\#\s]*modified[\#\s]*under[\#\s]*those[\#\s]*terms.[\#\s]*This[\#\s]*program[\#\s]*is[\#\s]*distributed[\#\s]*in[\#\s]*the[\#\s]*hope[\#\s]*that[\#\s]*it[\#\s]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia7ce0a78f96563b8dc0f6eb648c4ba4cefb2b838 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41180 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08mainboard/*/*/*.asl: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I5970cd188d06214d410949f4a3f8816c85c39451 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41141 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08mainboard/*/*.spd.hex: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: I3eb39d985f2712ab0a7a5a76b06ed625eb51c9d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41140 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08mb/google/reef: add G2 TS support for snappyKevin Chiu
Add G2 GTCH7503 HID TS support spec from G2: G7500 / Ver.1.2 (3, April, 2018) BUG=b:155827595 BRANCH=master TEST=emerge-snappy coreboot Change-Id: I151bf141148f4f00b3dadd9c44ab3a6b7731cde1 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41090 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-07mb/x9scl/early_init: Remove unused includesElyes HAOUAS
Change-Id: I455a43ab6c4931a4fb1f717a65013b6b7cefb777 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: move copyrights and authors to AUTHORSPatrick Georgi
Also split "this is part of" line from copyright notices. Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06soc/intel/tgl: Synchronize GPIO ASL table with Linux kernelShaunak Saha
Kernel pinctrl driver changed for Tiger Lake and went to old scheme. Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/ third_party/kernel/+/2116670 BUG=b:151683980 BRANCH=none TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl verify INTC34C5:00 listing all the pins. Cq-Depend:chromium:2116670 Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06mb/google/dedede: Enable PMC, P2SB and PCH SPI in the devicetreeKarthikeyan Ramasubramanian
BUG=None TEST=Build and boot the mainboard. Change-Id: I1aae4adf1c13fd4ff58aa38a877f34e142f320f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41037 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06mb/purism/librem_skl: select DRIVERS_GENERIC_CBFS_SERIALMatt DeVillier
This driver was previously added for another out-of-tree Librem device, but forgot to switch over the librem_skl boards to use it. Remove duplicate functionality from mainboard.c and delete the empty file. Test: build/boot Librem 13v2 and verify serial number read from CBFS via dmidecode. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ide952197335c6bfbad846c6d6f62be5c4c57e2cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-06mb/purism/librem_{bdw,skl}: select MAINBOARD_HAS_TPM1Matt DeVillier
Current model Librems all have a TPM 1.2 module, so select it at the board level to avoid having to do so in .config. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Iab8b39c39aef2a3fc182f1a50091f84f2151a394 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-05mb/intel/jasperlake_rvp: Configure IP specific GPIOsMaulik V Vaghela
This patch configures all IP related GPIOs as per mainboard schematics. Till now, we were relying on FSP to do IP specific GPIO programming but now we'll program all GPIOs from mainboard. This will remove ambiguity of GPIO programming done by FSP and coreboot will do full GPIO programming Programming GPIOs of following IPs - I2C - Emmc - Display - CPU specific gpio (SLP lines) - Cnvi - SD BUG=None BRANCH=None TEST=compile coreboot and checked that all IP functionality working. Change-Id: I98583b768cbd8ab4af536b31d758cb1cee93edfb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-04mb/purism/librem_skl: disable serial console outputMatt DeVillier
Librem SKL/KBL boards do not have an exposed serial port interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot librem 13v4 with board defaults + Tianocore Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I4c3f8a3c1726f804957b06b437b399291854a3f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-04mb/purism/librem_skl: Clean up KconfigMatt DeVillier
Reorder Kconfig selects alphabetically, and select the correct SoC for each variant (even though it currently makes no difference). Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I46f651a530ef0ed617dd1f3eee077e84279a40f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40913 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/purism/librem_skl: rename variant directoriesMatt DeVillier
Since the same variant dirs are used by multiple versions of the same board, drop the v2/v3 labels. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Id913e31ab52043e49769be9d3ebf6e71ecb0c856 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-05-04mb/purism/librem_skl: Convert to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I3dac62a649e12ea2498d3ecafe03fd0d62af5f2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMeMatt DeVillier
Per the schematics, SRCCLKREQ2# is used for the NVMe and should be enabled. Enable CLKREQ for PCIe RP9, and adjust comments to indicate correct value used per schematic. Test: build/boot Librem 15v3 with NVMe drive, verify drive identified properly and no errors in boot log. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I159cb7ce1f5195d95c0229490c3bbde26edbd375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/purism/librem_skl: drop SataSpeedLimit restrictionMatt DeVillier
SataSpeedLimit was set to 3Gbps to work around issues which are now known to be the result of incorrect FSP behavior. Since SataPwrOptEnable is now set at the SoC level and ensures the SIR registers are correctly programmed, we can re-enable 6Gbps operation without errors. Test: build/boot Librem 13v2 with both m.2 and 2.5" SATA drives, check dmesg for errors. Change-Id: I3565dc063724ad288ef92361942fcdc14daac17e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40909 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04soc/intel/skl: always enable SataPwrOptEnableMichael Niewöhner
For unknown reasons FSP skips a whole bunch of SIR (SATA Initialization Registers) when SataPwrOptEnable=0, which currently is the default in coreboot and FSP. Even if FSP's default was 1, coreboot would reset it. This can lead to all sorts of problems and errors, for example: - links get lost - only 1.5 or 3 Gbps instead of 6 Gbps - "unaligned write" errors in Linux - ... At least on two boards (supermicro/x11-lga1151-series/x11ssm-f and purism/librem13v2) SATA is not working correctly and showing such symptoms. To let FSP correctly initialize the SATA controller, enable the option SataPwrOptEnable statically. There is no valid reason to disable it, which might break SATA, anyway. Currently, there are no reported issues on CML and CNL, so a change there could not be tested reliably. SKL/KBL was tested successfully without any noticable downsides. Thus, only SKL gets changed for now. Change-Id: I8531ba9743453a3118b389565517eb769b5e7929 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40877 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/up/squared: Fix eMMC speed for UP2 with EDK2Patrik Tesarik
Since commit 402fe20e (mb/up/squared: Add mainboard) the UP2's eMMC maximum host speed was reduced to DDR50, because HS200 showed I/O errors in the host kernel. We found out that with EDK2 master the correct Host Speed could not be set properly during EDK2 platform init. Therefore eMMC would not show up for boot device selection. This commit sets the eMMC MaxHostSpeed to the designed max value of the used eMMC on the UP2 board and furthermore drops the override from the ramstage.c. It's already set in the devicetree.cb. Though CRC errors are still visible in EDK II debug logs, no other negative effects have been observed. Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de> Change-Id: I8d53204d8a776efd560fbdea918f83e180813179 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/google/dedede: Read DRAM part number from CBIMarco Chen
The index of MEM_STRAPS will be migrated from per DRAM part number to per DRAM characteristic therefore one index mapped to a single SPD binary can represent to multiple DRAM part numbers as long as their characteristic is the same for DRAM controller to support. In this case, the real DRAM part number would be provisioned in the CBI instead of SPD in the factory flow. As a result, we need to extract DRAM part number from CBI. BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. check DRAM part number is correct in SMBIOS for memory device Change-Id: I40780a35e04efb279591e9db179cb86b5e907c0d Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-04mb/**/dsdt.asl: Drop unused BRIGHTNESS_{UP,DOWN}Angel Pons
It is only used with the Lenovo-specific H8 EC code. Change-Id: If3b209a9ab82a07ce7b4450d8a0b62a1ca86a95c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>