summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2019-11-11mb/siemens/mc_apl6: Add TPM to devicetreeWerner Zeh
The TPM chip needs to be added to the devicetree so that the ACPI tables will be generated for it. These ACPI table entry is used by the OS to get the location of the TPM chip. Change-Id: Ic40d1cf236dd849f04f088808d94b6dd81e3238a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controllerWerner Zeh
This mainboard variant uses SD-card and not eMMC. Therefore eMMC controller is disabled while SDHCI is enabled. Change-Id: I40b314905730b5d74c674d2251f8a4e5c807805f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36676 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridgeWerner Zeh
On this mainboard variant the PCIe-2-PCI bridge is used a bit different. Adjust the switched off clock lines to match the mainboard configuration. Change-Id: I16f3b6eed0948c8201baecdfbb8052c6c1c335c8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Enable VBOOT per defaultWerner Zeh
mc_apl6 uses VBOOT scheme so enable it as default. Change-Id: I341180f3815ff9f3b2db801d9d989119a2585b03 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11mb/siemens/mc_apl6: Add new mainboard based on mc_apl3Werner Zeh
This patch adds a new mainboard variant called mc_apl6 which is based on mc_apl3. So far only the names have been adjusted with no further changes. Following commits will introduce the needed changes for this mainboard variant. Change-Id: Ic935f6cc1f037947b2c167696d40da8309e4d4f0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2019-11-11src/mb: Remove redundant message befor 'system_reset()'Elyes HAOUAS
Change-Id: Id5a6b7c731b65aafbb88a7c52a1f434dbab41f4a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36694 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-11mb/{x4x}: Remove unused 'include <northbridge/intel/x4x/iomap.h>'Elyes HAOUAS
Change-Id: I82f1d4325ea87585137fa81567aa82b80454c704 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
With the 0.71586+ Goodix FW, we can reduce the reset delay from 500ms to 120ms. We should do the change in coreboot device tree after we ensure Helios DVT build is flashed with 0.71586+ Goodix FW. BUG=b:142316026 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I000ee4ea84c598b437992f1000f6e5b561cae605 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2019-11-10drivers/intel/fsp1_1: Fake microcode update to make FSP happyArthur Heymans
The FSP loops through microcode updates and at the end checks if the microcode revision is not zero. Since we update the microcode before loading FSP, this is the case and a fake microcode can be passed to the FSP. The advantage is that the Kconfig symbols to specify the location and the size of the microcode blob can be dropped. Change-Id: I63cfb7b19e9795da85566733fb4c1ff989e85d03 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36255 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09arch/x86: Replace some __SMM__ guardsKyösti Mälkki
We generally do not guard source in attempts to reduce the final object sizes, but rely on garbage collection. Most of the __unused attributes inserted here will be removed when remaining __SIMPLE_DEVICE__ guards can be removed. Change-Id: I2440931fab4f41d7e8249c082e6c9b5a9cd0ef13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09ELOG: Introduce elog_gsmi variantsKyösti Mälkki
This avoids a lot of if (CONFIG(ELOG_GSMI)) boilerplate. Change-Id: I87d25c820daedeb33b3b474a6632a89ea80b0867 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36647 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-09mb/asus/p5ql-em: Add mainboardArthur Heymans
Tested, working: - First dimm slot of each channel - USB, SATA - CPU FSB at 800, 1067 and 1333MHz - Libgfxinit on DVI and VGA slot - PCI slot - Realtek NIC (configure MAC address in Kconfig) - PEG slot - PS2 keyboard Tested, not working: - second dimm slot for each channel. Those are hooked up to the second rank of the channel, instead of rank 3 and 4. The raminit does not support such setups. Untested: - PCIe x1 slot, likely works fine - HDMI Tested using SeaBIOS 1.12, Linux 4.19. Change-Id: I88fe9c66dae079cd7eedcc9736c5922defbc0e5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-11-08google/stout: Remove ELOG_GSMI from ECKyösti Mälkki
EC_HOST_EVENT_xxx are only defined with ec/chromeec. Change-Id: Ie0a1349ab460142dc2744155a422b5ee22528e4c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-08google/parrot: Remove ELOG_GSMI from ECKyösti Mälkki
EC_HOST_EVENT_xxx are only defined with ec/chromeec. Change-Id: Idf7b04edc3fce147f7857691ce7d6a0ce03f43fe Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36649 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-08arch/x86: Drop some __SMM__ guardsKyösti Mälkki
Change-Id: I64063bbae5b44f1f24566609a7f770c6d5f69fac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-08mb/facebook/fbg1701: Remove some preprocessor guardsKyösti Mälkki
Change-Id: Ia7289fa8337e1a93e620a52a67ca8cbdd78a66bc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-08mb/google/hatch/var/akemi: disable unused USB port for Akemi platformPeichao Wang
Akemi platform dosen't support WWAN device and unused USB2 port 3, 4, 5, 7, 8 and USB3 port 3, 4, 5 so close them. BUG=None TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I7eff4da77caea7d4fe46597320be134d34d78a22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-07hatch: Create puff variantEdward O'Callaghan
Includes: - gpio mappings, - overridetree.cb, - kconfig adjustments for reading spd over smbus. V.2: Rework devicetree with comments and drop some useless gpio maps. BUG=b:141658115 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I6449c4fcc1df702ed4f0d35afd7b0981e4c72323 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-11-07mainboard/google: Allow Hatch variants to read SPD data over SMBusEdward O'Callaghan
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. This romstage variant allows for reading the SPD data over SMBus. V.2: Dispence with memcpy(). V.3: Revert back to previous patch with memcpy(). V.4: Rewrite again to avoid memcpy(). BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I3516a46b91840a9f6d1f4cffb2553d939d79cda2 Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36449 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
The previous values do not affect the touchscreen function. But, the previous values cause the power leakage in S0ix. from b/142368161: 1. Modify GPP_D: The specification define T1 >= 10ms. We change it to 12ms for a safety and low impact value in our mind. Enable pin as GPP_D9 is define to be AVDD in specification. Set it to 10ms to make it to be the final one to pull low during power off sequence . 2. Add GPP_C4: If we set stop_off_delay_ms to be 1. The true T4 we got will be 300us . Set stop_off_delay_ms to be 2 . True T4 will be 500us . So we change it to 5 to be a low impact value in our mind according to the true T4 value we got . BUG=b:142368161 BRANCH=Master TEST=emerge-hatch coreboot chromeos-bootimage ./util/abuild/abuild -p none -t google/hatch -x -a Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I86c920ff1d5c0b510adde8a37f60003072d5f4e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35907 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/g/drallion: Override smbios enclosure type for drallionMathew King
Drallion can be either a clamshell or convertible depending on the presence of the 360 sensor board. Set the smbios type 3 enclosure type to either CONVERTIBLE or LAPTOP accordingly. BUG=b:143701965 TEST='dmidecode -t 3' Type = Convertible with sensor board connected Type = Laptop with sensor board disconnected Change-Id: I766e9a4b22a490bc8252670a06504437e82f72d5 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36512 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-06mb/g/drallion: Consolidate 360 sensor board detectionMathew King
Create a single function to determine if the 360 sensor board is present on a device. BUG=b:143701965 TEST='emerge-drallion coreboot' Change-Id: I4100a9fdcfe6b7134fb238cb291cb5b0af4ec169 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2019-11-06security/vboot/Kconfig: Remove unused symbolsArthur Heymans
Change-Id: I417a2ff45b4a8f5bc800459a64f1c5a861fcd3d5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-06mb/emulation/qemu: Add VBOOT supportPatrick Rudolph
Add VBOOT support for testing purposes. Add a 16 MiB FMAP containing RO + RW_A. Tested on qemu. Change-Id: I4039d77de44ade68c7bc1f8b4b0aa21387c50f8a Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-06mainboard/google: Rework Hatch so that SPD in CBFS is optionalEdward O'Callaghan
All Hatch variants so far embed static SPD data encoded within the firmware image. However we wish the flexibility for romstage implementations that allow for reading the SPD data dynamically over SMBus. BRANCH=none BUG=b:143134702 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ie1637d08cdd85bc8d7c3b6f2d6f386d0e0c6589b Signed-off-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
Update thermal threshold settings for TSR3 sensor. There is an issue fan is always running, even during system idle state. This change fixes this issue and fan starts only when it breaches the temperature threshold. BRANCH=None BUG=b:143861559 TEST=Built and tested on Helios system Change-Id: Ia417f8c51442005cc8c2251c188cebc197e0a773 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36609 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-05vendorcode/eltan/security: Align mboot with coreboot tpmWim Vervoorn
Align the eltan mboot support with coreboot tpm support to limit the amount of custom code. We now only support SHA256 pcrs, only single a single digest will be handled in a call. The pcr invalidation has been changed fixed values are now loaded while the correct algortihm is selected. BUG=N/A TEST=tested on fbg1701 Change-Id: Id11389ca90c1e6121293353402a2dd464a2e6727 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-05mb/supermicro/x11ssh-tf: Disable i8042 supportPatrick Rudolph
Even though the vendor firmware enables the i8042 I/O port, it doesn't feed valid data to those, but instead uses USB HID devices. Disable the KBC port in SuperI/O and report no KCS port using FADT. Fixes: * Fixes error message in Linux that i8042 keyboard couldn't be enabled. Tested on Supermicro X11SSH-TF: The virtual remote managment console still works. Change-Id: I1cdf648aa5bf1d0ec48520fa1e45bdaf043cb45d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-05mb/google/kahlee/treeya: Update STAPM parameters for TreeyaPeichao Wang
Tune stapm percentage from 80 to 68 and time from 250 second to 90 second make them meet Lenovo temperature spec. BUG=b:143859022 TEST=build firmware and install it to DUT and run fishbowl 1000, check temperature whether meets spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I254140c9d242ed918b3b689d4fb4a1d0e871cd55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2019-11-04mb/asrock/h110m/devicetree: fix VR config infoMaxim Polyakov
Removes unnecessary information about the Ring Sliced VR configuration from another board with FSP1.1 (which is no longer supported). Change-Id: Ia2b90d9ede782852c2127da972333bada378b217 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-04mb/asrock/h110m: use SSDT generator for SuperIOMaxim Polyakov
Modifies the device tree to use the ACPI SSDT generator[1] for NCT6791D SuperIO, dropping the need to include code from the superio.asl, which was inherited from another chip (NCT6776) and required fixes. SSDT gen support for Nuvoton NCT6791D chip was added in the previous patch [2]. [1] https://review.coreboot.org/c/coreboot/+/33033 [2] https://review.coreboot.org/c/coreboot/+/36379 Change-Id: I57b67d10968e5e035536bcb0d8329ce09d50194b Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-11-04google/auron: hook up libgfxinitMatt DeVillier
Internal/external displays functional on all variants other than Samus. Unable to verify external outputs on Samus (USB-C using DP/HDMI adapter). Test: build/boot lulu variant with libgfxinit, verify internal/ external displays functional prior to OS display driver loaded. Both linear framebuffer and scaled VGA text modes functional. Change-Id: I867b2604861ebae02936e7fc0e7230a6adcb2d20 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04soc/intel/sgx: convert SGX and PRMRR devicetree options to KconfigMichael Niewöhner
The devicetree is not made for user-choosable options, thus introduce Kconfig options for both SGX and the corresponding PRMRR size. The PRMRR size Kconfig has been implemented as a maximum value. At runtime the final PRMRR size gets selected by checking the supported values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest to the chosen one. When "Maximum" is chosen, the highest possibly value from the MSR gets used. When a too strict limit is set, coreboot will die, printing an error message. Tested successfully on X11SSM-F Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-04mb/google/hatch: update DLL values for KindredJamie Chen
Update emmc DLL values for Kindred BUG=b:131401116 BRANCH=none TEST=Boot to OS 100 times on Kindred EVT Change-Id: Ibd840b31bb0e5a742495758de55b532e6c3946aa Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-11-04mb/*/*/others: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: Iabfd680fdb50534e6b9f6cfdecda9f8de0f8a610 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04sb/intel/lynxpoint: Use sb/intel/common/platform.aslArthur Heymans
Change-Id: I86260a374a3f60f16dc73573e7989f0a4ffec818 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/*/*{i82801gx}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: Ifc0799d26394a525d764fb4ffc096b48060ee22f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-04include: Remove EC_EVENT_* from elog.hYu-Ping Wu
All of the EC_EVENT_* macros can be replaced with the EC_HOST_EVENT_* macros defined in ec_commands.h, which is synchronized from Chromium OS ec repository. BRANCH=none BUG=none TEST=emerge-kukui coreboot Change-Id: I12c7101866d8365b87a6483a160187cc9526010a Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-04mb/supermicro/x11-lga1151-series: drop console guard in bootblockMichael Niewöhner
To make debugging possible in a fallback setup, the serial console must be set up in bootblock, thus drop the guard. Change-Id: If0dd3c03ba52b4936eb234e6b2b61bb5ce044fcd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36602 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/supermicro/x11-lga1151-series: use new console delay Kconfig optionMichael Niewöhner
This replaces the hardcoded delay by the new Kconfig option. Change-Id: I8bf4ef7ad9beea7b3dc22e1567623a423597eff9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-04arch/ppc64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This avoids the need for a platform specific implementation of cbmem_top. HOW TO TEST? There is no serial console for the qemu target... Change-Id: I68aa09a46786eba37c009c5f08642445805b08eb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marty E. Plummer <hanetzer@startmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/*/*{i82801ix}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: I9150db163131d4c3f99a4e0b6922a61c96a6d6e2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/*/*{bd82x6x/ibexpreak}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: I36095422559e6c160aa57f8907944faa4c192dee Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-04mb/lenovo/{x200,t400}: Add VBOOT supportArthur Heymans
Tested on thinkpad X200 with CONFIG_H8_FN_KEY_AS_VBOOT_RECOVERY_SW selected, the RW_A slot is properly selected unless the FN button is pressed. 600+ms are spend waiting for the EC to be ready. Change-Id: I689fe310e5b828f2e68fcbe9afd582f35738ed1d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35998 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/google/drallion: Update GPIO tableEric Lai
Follow latest GPIO table to change gpio. BUG=b:143728355 BRANCH=N/A TEST=build pass Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iee61c74a5cab5a62a90c0543f212650c4f2420de Reviewed-on: https://review.coreboot.org/c/coreboot/+/36524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-11-04mb/google/drallion: Correct GPP_E7 as stop pinEric Lai
Current design reset pin is connected to PLTRST. GPP_E7 is stop pin for touch. Reserve reset pin for next stage implement. BUG=b:143733039 BRANCH=N/A TEST=check touch screen can work properly Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3ebd56ab49b87da425583da04f082e69293a023e Reviewed-on: https://review.coreboot.org/c/coreboot/+/36535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-11-04mb/google/drallion: fix GPP_E16 glitch when enter S5Eric Lai
Set GPP_E16 reset to DEEP. BUG=b:143057255 BRANCH=N/A TEST=Measure GPP_E16 from S0 to S5 has no glitch Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I63932c6f5c8b7e6e9ab8aa55e69c629d29e7d1fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/36511 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-04mb/facebook/fbg1701: Add logo to the menuWim Vervoorn
Allow the user to enable and disable the logo from make menuconfig. The file can be selected as well. BUG=N/A TEST=build Change-Id: I630a9d14308131c180adaaa9e1fa5e6e11c3c61c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-03mb/intel/{i82801gx,x4x}: Don't select ASPM optionsArthur Heymans
These are likely not properly set up and L1 is not even supported on the desktop variant of the southbridge. This fixes observed instability on some PCIe GPUs. Change-Id: I70d3536984342614a6ef04a45bc6591e358e3abe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36576 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-03arch/arm64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This solution is very generic and can in principle be implemented on all arch/soc. Currently the old infrastructure to pass on information from romstage to ramstage is left in place and will be removed in a follow-up commit. Nvidia Tegra will be handled in a separate patch because it has a custom ramstage entry. Instead trying to figure out which files can be removed from stages and which cbmem_top implementations need with preprocessor, rename all cbmem_top implementation to cbmem_top_romstage. Mechanisms set in place to pass on information from rom- to ram-stage will be replaced in a followup commit. Change-Id: I86cdc5c2fac76797732a3a3398f50c4d1ff6647a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-03arch/arm: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This solution is very generic and can in principle be implemented on all arch/soc. Instead trying to figure out which files can be removed from stages and which cbmem_top implementations need with preprocessor, rename all cbmem_top implementation to cbmem_top_romstage. Mechanisms set in place to pass on information from rom- to ram-stage will be placed in a followup commit. Change-Id: If31f0f1de17ffc92c9397f32b26db25aff4b7cab Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01mb/emulation/*-riscv: Initialize cbmem in romstageArthur Heymans
It is expected that cbmem is initialized in romstage. The qemu-riscv target did not perform that correctly. Fix this omission. Change-Id: I00f8e3b315e57a5c042889f48450f79d263f24b1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36446 Reviewed-by: Philipp Hug <philipp@hug.cx> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/facebook/fbg1701: Add public key to bootblock_verify_listWim Vervoorn
The public key was not verified during the verified boot operation. This is now added. The items in the manifest are now fixed at 12 as we always have the postcar stage. BUG=N/A TEST=tested on facebook fbg1701 Change-Id: I85fd391294db0ea796001720c2509f797be5aedf Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36504 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/apple/macbook21: Use DEBUG_RAM_SETUPElyes HAOUAS
Also, the loglevel is never set to value of > 8. Change-Id: Ief29e07be6ac075956bf0f9aee85b14eb89af44c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
2019-11-01mb/facebook/fbg1701: Remove confusing text boxes from menuWim Vervoorn
The Kconfig contained some items that were only intended to set a default and that now were displayed in two locations in the menuconfig. BUG=N/A TEST=build Change-Id: If5d9c993c03a0e901fd6c2a2107a6be6b94d063b Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36481 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/google/drallion: Add second touch pad supportEric Lai
Add second source touch pad with i2c address 0x15. BUG=b:142629138 BRANCH=N/A TEST=check new touch pad can work properly Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Icc58dbcf307f11c368a1a5408f32111ed5841d39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-11-01mb/intel/saddlebrook: Enable Chipset_lockdown coreboot configPraveen Hodagatta Pranesh
This patch enables lockdown configuration for saddlebrook platform BUG=None TEST=Boot to Linux on saddlebrook and verified MRC is restored on warm, cold, resume boot path's. Change-Id: Ia324c118b0c8e72b66a757dee5be43ba79abbeab Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-01mb/intel/saddlebrook: Select coreboot MP initPraveen Hodagatta Pranesh
use coreboot MP init for saddlebrook by default. BUG=None TEST=Boot till yocto linux 2.7 on saddlebrook and verified the AP's proper initialization using 'cat /proc/cpuinfo' command. Change-Id: I2db2fe92c8ba0e649dccf95ce804a97ae4a05603 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-01soc/intel/{cnl,icl}: Move globalnvs.asl/nvs.h into common/block/Subrata Banik
This patch creates a common instance of globalnvs.asl/nvs.h inside intel common code (soc/intel/common/block/) and ask cnl & icl soc code to refer globalnvs.asl and nvs.h from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify GNVS operation region presence after booting to OS. Change-Id: Ia9fb12a75557bd7dc38f6d22ba2b32065d18b3ee Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/google/kukui: Unselect FATAL_ASSERTElyes HAOUAS
FATAL_ASSERT is used for debugging purpos. Don't select it by default. Change-Id: If4d521827f3d50fb662b89b24d00fb0517e7af2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-11-01lib/cbmem_top: Add a common cbmem_top implementationArthur Heymans
This adds a common cbmem_top implementation to all coreboot target. In romstage a static variable will be used to cache the result of cbmem_top_romstage. In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable needs to be populated by the stage entry with the value passed via the calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the same implementation as will be used as in romstage. Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01mb/portwell/m107: Remove Intel wifi disableWim Vervoorn
The Intel wifi drivers were disabled by default. This should not be done here as the baseboard defines if this present or not. BUG=N/A TEST=build Change-Id: I364a821f8387d580b1fbfb7cf77b32a3a6dceebb Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36503 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01mb/portwell/m107: Add Kingston memory supportWim Vervoorn
Add support for board revision 1.3 containing Kingston memory. BUG=N/A TEST=tested on portwell m107 module Change-Id: I436698ee079952580c764e840ee0ad2e18ea8d3b Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-01mb/facebook/fbg1701: Disable Intel wifiWim Vervoorn
The facebook fbg1701 never contains Intel wifi functionality so this can be disabled. BUG=N/A TEST=tested on facebook fbg1701 Change-Id: Iab7dd760020cb7a9f7fea24812afb19bf5e62183 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-01trogdor: Add mainboard gpio supportT Michael Turney
Change-Id: I06cdb8eaaf7f74b47e1d1283dcaa765674ceaa45 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36070 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-31mb/google/drallion: Turn off HDMI power when enter s0ix and S5Eric Lai
Turn off HDMI power when enter s0ix and S5. BUG=b:143057255 BRANCH=N/A TEST=Measure the power on GPP_E16 under s0ix and S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I580e6094d48663d5c208fd82c7744485d899bcc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36224 Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-31mb/asrock/h110m: configure SuperIO Deep SleepMaxim Polyakov
Change-Id: I10766ffda67bdc830ab01436ebd0578c79f1ec70 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-30mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
Modify DPTF parameters. Modify TDP PL1 values to 15. Remove TCHG Level 3 - 0.5A. BUG=b:131272830 BRANCH=none TEST=emerge-hatch coreboot chromeos-bootimage Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I0e5c079856a167b1c2ef52e446d055404e565858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/35794 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30hatch: refactor gpio table into baseboard, allow empty SPDsPaul Fagerburg
Each variant needed to define variant_early_gpio_table(), even if it didn't need to make any changes. Added a __weak version of the function into baseboard/gpio.c. Certain upcoming Hatch variants will not use SPD files. Allow SPD_SOURCES in spd/Makefile.inc to be empty. BUG=None BRANCH=None TEST=Build coreboot and see that it builds without error Change-Id: Ie946cfd7c071824168faa38fd53bd338a5a451e1 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36068 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30mainboard: Add Lenovo ThinkPad T440pIru Cai
The code is based on autoport. This port is tested on a T440p without a dGPU and can boot Arch Linux from SATA disk with SeaBIOS payload. The tested components and issues are in the documentation. Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-29purism/librem_skl: add libgfxinit supportMatt DeVillier
Panel settings taken from KBL FSP sample vbt.bin Test: build/boot librem13v2/15v3 with libgfxinit init, verify both LFB and text modes functional Change-Id: I9582065603417e53704244e95dde51a59f709664 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-10-28nb/intel/gm45: Add C_ENVIRONMENT_BOOTBLOCK supportArthur Heymans
The i82801ix_early_init is now called both in the bootblock and romstage. The rationale behind setting this up twice is to ensure bootblock-romstage compatibility in the future if for instance VBOOT is used. This moves the console init to the bootblock. The romstage now runs uncached. Adding a prog_run hooks to set up an MTRR to cache the romstage will be done in a followup patch. The default size of 64KiB is not modified for the bootblock as trying to fit both EHCI and SPI flash debugging needs a more space and 64KiB is the next power of 2 size that fits it. TESTED on Thinkpad X200. Change-Id: I8f59736cb54377973215f35e35d2cbcd1d82c374 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-28mb/lenovo/x200: Correct device tree override logicBill XIE
If a device node should be enabled on some variants, but disabled on others, it had better be declared as disabled (rather than absent) in base device tree (rather than override tree for the variant disabling it), and enabled in override tree for the variant needing it, so that it does not need to be declared once more when adding another variant with such node disabled. Change-Id: I4b28360905ae38149ace9ac5d21cd6d5045b7584 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-28mb/google/sarien/arcada: Add support for Cirque TouchpadKarthikeyan Ramasubramanian
Add Cirque Touchpad devicetree configuration to export relevant ACPI objects to the kernel. BUG=b:141259109 BRANCH=sarien TEST=Boot to ChromeOS. Ensure that relevant ACPI objects are exported in the SSDT. Change-Id: I91dcb27b86c6a2bed5579f1f6c1102871d55b315 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-10-27mb/google/poppy/variant/nocturne: don't invert GPP_D17Nick Vaccaro
This change removes an inversion of GPP_D17 that caused the device to get stuck in a reboot loop because the kernel was crashing within the first couple seconds of kernel boot. BUG=b:142515200 BRANCH=none TEST=Flash and boot nocturne, verify boot is stable and that device doesn't reboot after jumping into kernel, and that it passes the 'tast -verbose run <ip> hardware.SensorRing' test. Change-Id: Ia1408ef6ea92f6b31a9f3eee8720954af3a7c382 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35967 Reviewed-by: Yicheng Li <yichengli@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-27Dragonair: Add sku23Wisley Chen
BUG=b:142987639 TEST=emerge-hatch coreboot Change-Id: I0ff1a81d0579d0b328a48bc7d4f867592ec63e8b Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-10-27mb/supermicro/x11-lga1151: use the new Kconfig to hide GOPMichael Niewöhner
The board does not have any graphics port connected to the SoC. Hence, use the new Kconfig to hide GOP initialization. Change-Id: Ia88e062bea243369da27b94608f89f0808257688 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-27src/mainboard: change "unsigned" to "unsigned int"Martin Roth
Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I46d131f76ec930d2ef0f74e6eaabae067df10754 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-27mb/supermicro/h8scm_fam10: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Found-by: ACPICA 20191018 Change-Id: I9f6c025a548e60a91d8064b0aeaf4d8530d78305 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/amd/serengeti_cheetah_fam10: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: I1650df927aa6d4a1282ed50b2bcbb63d5bd04347 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/msi/ms7721: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: Ib70b349742fb636e25f1369d54641997e57a2045 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/lippert: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: I5761b093b43aa7d97a6b84730a4009a5d163550d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/jetway: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: Ib454fc76db0b45332326772b8d1f295429107133 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/iei: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: I547be16285787ee3578f855111ca177be047ced2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/gigabyte: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: Ia27308ba17c6b5c836ada6278f7d26631e09c022 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/avalue: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: I303023a16f8c913c965995794cb627bb9591560b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/asus: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() keyword is deprecated, use Device() instead. Change-Id: I162304bdef6562fd660c01fb8fc67037ebe8cfa5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/advansus: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() Keyword is deprecated, use Device() instead. Change-Id: I805291716ab3395736d8a70a18468f247d9f4edf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/amd: Use 'Device()' instead of 'Processor()'Elyes HAOUAS
Processor() operator is deprecated, use Device() instead. Change-Id: Ia1d73806b00ec38084fff3989f52227d4c216e65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27mb/(ich7): Use macro instead of magic numberElyes HAOUAS
Change-Id: Ida291ed9f3a509e9b96a5c254433db6f8028bfb2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-10-27src: Use 'include <boot/coreboot_tables.h>' when appropriateElyes HAOUAS
Change-Id: I3d90e46ed391ce323436750c866a0afc3879e2e6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36359 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26soc,mb/intel: clean up remaining FSP2.0 socs/boardsMichael Niewöhner
Remove CONFIG_...FSP2.0 based if-switches from FSP2.0-only socs/boards Change-Id: Iae92dc2e2328b14c78ac686aaf326bd68430933b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36279 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26soc/intel/skylake: move/rename files after drop of FSP 1.1Michael Niewöhner
Follow-up commit where only files are moved and paths adapted to make review of the previous commit easier. Change-Id: Iff1acbd286c2ba8e6613e866d4e2f893562e8973 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35868 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26soc/intel/skylake: drop support for FSP 1.1Michael Niewöhner
This drops support for FSP 1.1 in soc/intel/skylake, after all boards have been migrated to FSP 2.0, which is backwards compatible. Any moving of files happens in a follow-up commit to make review easier. Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26mb/intel/saddlebrook: Enable serial port on SIOPraveen Hodagatta Pranesh
Enable saddlebrook board Serial port on SuperIO by selecting DRIVERS_UART_8250IO. TEST=Build, Boot saddlebrook board and verified serial logs. Change-Id: Ic7b3416f281bfd91416c987c5a720ffac0c89d45 Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2019-10-26mb/intel/saddlebrook: migrate to FSP 2.0Michael Niewöhner
This patch is part of the patch series to drop support for FSP 1.1 in soc/intel/skylake. The following modifications have been done to migrate the board(s) from FSP 1.1 to FSP 2.0: - remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0) TODO: - testing Change-Id: I7481f3413de6780df01d9b769bd4f16d439f087c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35923 Reviewed-by: Michael Niewöhner Reviewed-by: Wim Vervoorn Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25trogdor: Provide initial mainboard supportT Michael Turney
Change-Id: Ic2f0944b92dcad7048a0c38720d2ef3c855ef007 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-25mb/lenovo/{t60,r60}: Add ThinkPad R60 support as variant boardMaccraft
- This port should be Reclaim Your Freedom compliant (not certified yet). - Untested on boards with external Radeon graphics adapter. - Some columns on the left-most side of display are completely black on 1400x1050 IPS display[1]. Display works fine on Linux. I don't know why it appears like that. So far it has been observed only with native graphics initialization. - Only GRUB2 and SeaBIOS payloads tested for now. - 2504 docking station USB doesn't work under Linux. Can detect pendrive in GRUB2 payload. - Sometimes it takes 20s of "pretending it's powered off" to run coreboot code. Issue is payload agnostic. Probably caused by missing one capacitor on my unit. [1] https://imgur.com/a/0wpMGsm Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14 Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-25src/mainboard: Drop wrong _ADR objectsElyes HAOUAS
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID object or an _ADR object, but should not contain both." Change-Id: I50cafce0aaf465ee95562ccff6c8f63fb22096c0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 22:57:34 +0000