| Age | Commit message (Collapse) | Author |
|---|
|
switch and SPI write protect for fill_lb_gpios() to coreboot table.
BUG=chrome-os-partner:43707
BRANCH=none
TEST=build and boot on kunimits
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Change-Id: I82cd3f74d0ac26e369ee4274b2c65f4f93c1fd3b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 804a8a60951321e1b5b1d7ddacb97ddbe0cd7680
Original-Change-Id: I31ed6c0e48089b84ef9d52753484253a091d5aa5
Original-Reviewed-on: https://chromium-review.googlesource.com/295580
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11436
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
mainboard_ec_init() wasn't getting run due to an invalid
Kconfig symbol. This check isn't required as the Kconfig
option for the EC is forced to be enabled, and the function
should always be run.
BRANCH=none
BUG=none
TEST=Rebuilt glados mainboard.
Change-Id: I2c4a33d80533a19b02b83b3aaa6a3386e927f1c7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: edd8c7a0666208b35ee81f57ec2626390958dfb7
Original-Change-Id: I2a92fd28347455c09ecf2119788ca9b6a97a11de
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295143
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11435
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
recovery mode.
BUG=chrome-os-partner:43683
BRANCH=none
TEST=build and boot on kunimits and successfully enter recovery mode
by pressing “Esc + refresh + Power” keys.
Change-Id: Id25b9f2195f1caaa8b46967b4b5d4abdab48d6cc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 96b1c295448b412a5662afc729fdd37294d3cb61
Original-Change-Id: I9f650b28b0a86b631ffdfe6de5d58d18e48a0a22
Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295138
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11434
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=chrome-os-partner:44470
BRANCH=None
TEST=Builds and Boots on FAB3 (Kunimitsu)
Change-Id: I479fe60dcbdd51f4fa5bca857b4a166f958a54d5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: e88efdd8766e2846a650eb75709b29035c406bf8
Original-Change-Id: I9fe5697d31e188fca48b14fb76e71631f2974c2d
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295218
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11433
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Ported below patch from glados to kunimitsu:
glados: Abstract board GPIO configuration in gpio.h
Original-change-Id: I3f1754012158dd5c7d5bbd6e07e40850f21af56d
Originally-signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Originally-reviewed-on: https://chromium-review.googlesource.com/293942
BUG=chrome-os-partner:40828
BRANCH=none
TEST=Verify that acpi interrupts are incrementing on kunimitsu.
Change-Id: Ifeddb34289b6e62c936cf6c542906d6e7ef96ddd
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 8ff0dd2dcdf6485f0171fb967f7de3015cf4e4ad
Original-Change-Id: I1f270a03a241d2285639f79854d04059d2c2c99f
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295048
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: http://review.coreboot.org/11432
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The patch was ported from commit: glados: fix kepler probing
BUG=chrome-os-partner:44326
BRANCH=None
TEST=Built and booted kunimitsu. lscpi shows the device on bus 2.
Change-Id: I423e5d8414cb9864f6ff2f2ce7cd925baeb242eb
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 37bf5b7594a6784b3acb65410c670300e582e7aa
Original-Original-change-Id: I7fe4a707f9321b7bdec4b4be729c5d0dcce65f6e
Original-Originally-signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Originally-reviewed-on: https://chromium-review.googlesource.com/294810
Original-Change-Id: I2fb620ebff5b477a1a457a354c65229ad1092cae
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295164
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11431
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch includes the DPTF specific ASL files in the main
DSDT definition and enables the CPU thermal participant device
in the device tree. It also enables the DPTF flag in the global
NVS table.It also adds the ASL settings specfic to the mainboard.
BRANCH=None
BUG=chrome-os-partner:40855
TEST=Built for kunimitsu board. Tested to see that the thermal devices
and the participants are enumerated and can be seen in the
/sys/bus/platform/devices. Also checked the temperature readings of the
cooling devices and the thermal zones enumerated in the /sys/class/thermal.
Change-Id: I5fb28e4480648eab39cc9b13ed55eae1d3db4d42
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 54f7f33a12eb5744d6108e362fa1d078fe838b3c
Original-Change-Id: I82527989919bd4f3c49fb58dfc9463f1c1bd3353
Original-Signed-off-by: Shilpa Sreeramalu <shilpa.sreeramalu@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284821
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294650
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11429
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
forward port of "glados: make EC_SMI_L functional",
commit 50ed38feba58f
BUG=None
BRANCH=None
TEST=Built and booted kunimitsu.
CQ-DEPEND=CL:295012
Change-Id: I41daeb8b729f2de117b5d57c460925437460e50a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: d9308c0b8eb05c756d88dc0c3d761c9e76d07e08
Original-Change-Id: Ia90c70d21af75d0f0da2af2b4437ccf26659a157
Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295045
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11428
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use the macro for GPP_E22_IRQ instead of the ACPI code so it
can be removed.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=emerge-sklrvp coreboot
Change-Id: I09bea748fea34072d4f8ad7470d37e423b7f63de
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 89069f5f318329182390cad679511547b7d2a6d5
Original-Change-Id: Iad181b4ce1c557ce8d17645431d8ba6f558bb837
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/295171
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11427
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=chrome-os-partner:44336
BRANCH=None
TEST=Built and booted kunimitsu. Validation shows no regressions.
CQ-DEPEND=CL:294757
Change-Id: If4207e87cf22982162a8d5d47fa9e0509a2b2ab1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2f43fd6b7afc426d041a242a7e03dbf5800e1eee
Original-Change-Id: Id8ce1bd2f28d32898e99008e2a602d99a5c1098c
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/295012
Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11425
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This is needed to fix error in depthcharge:
src/vboot/util/flag.c:38 flag_fetch(): Don't have a gpio set up
for flag 3.
BUG=chrome-os-partner:44214
TEST=Verify depthcharge prints EC ID on boot up
BRANCH=None
Change-Id: Ia2d88b8427e54e2dc9e6c9abecc95fd7656abb66
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 142b156c72ceedfbd4bf3f54c0cb1128c0fad5a3
Original-Change-Id: I7e7a7d1b92bc1ee2c5ebac8de6946550ddd68a68
Original-Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294715
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11421
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move the gpio pad configuration prior to SiliconInit()
in case there are dependencies of the pads being configured
in prior to SiliconInit().
BUG=chrome-os-partner:43522
BUG=chrome-os-partner:43492
BRANCH=None
TEST=Built and booted glados.
Change-Id: I84f8e965bf205a4945b14a63fa8074953750f785
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 5cce5347449f69ac6cf7030ea3b91d3f8b4cc7f9
Original-Change-Id: I18cd33a455d5635a866abb76142cab516b04f446
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294642
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11420
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On proto2 boards the kepler device has its reset line pulled up
to one of its IO rails with a zener in between. This results in the
device not being visible at MemoryInit() time because for some
reason FSP is doing PCIE configuration/probing in that path. Hack
around the broken FSP logic by configuring the pads for kepler's
power and clkreq.
BUG=chrome-os-partner:44326
BRANCH=None
TEST=Built and booted glados. lscpi shows the device on bus 2.
Change-Id: I543eb3ccd3ab5ffacd6efc959e6e2f7a88de78b3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 67f6b57487e8724b469f74870e0083d4e1dac4d2
Original-Change-Id: I7fe4a707f9321b7bdec4b4be729c5d0dcce65f6e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294810
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Export the proper GPIO for EC_IN_RW so it can be picked up and
used by depthcharge/vboot.
BUG=chrome-os-partner:43072
BRANCH=none
TEST=build and boot on glados P2
Change-Id: I32d338ef424086ec9701900e976bd0dffe4637a0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: dd983c84de0c3b896b20d38438a3285cfcaf7e56
Original-Change-Id: I77f7d3a0c0d733302b81273d96026d39b001ed19
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294712
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11418
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GPIO(0, B, 3) and GPIO(7, C, 5) are not actually connected,
GPIO(0, B, 4) is named differently.
BUG=chrome-os-partner:43031
TEST=Rialto should still boot just fine, USB should still work
BRANCH=master
Change-Id: I11879385de6e9b57ac28bcae699333beb5a0d64c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a66bf1fd73ff8d15d4ec1a8f3602465941285c32
Original-Change-Id: Ib7d2baa6ed1ab38db786eb4d5e77316ad72cbfd4
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294713
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
TEST=Boot from veyron
BUG=None
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 6fe83821013954f0f2069598fd90a2d49de81101
Original-Change-Id: I68b105aa4bc3e82ef6a2421b127391e319c34d6e
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/294660
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-(cherry picked from commit c115d9a3ea2ca1cb62b2a1ee75996d8adb991d5d)
Original-jwerner: Added Minnie
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294763
Change-Id: I2bd6521c209db0e2d7d0bdb8ef2cde2715f321a6
Reviewed-on: http://review.coreboot.org/11399
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Without this, the leds would be stuck to whatever the pullup/down states the
pins come with on rk3288.
Ready2_LED, an orange led, is one of the leds in this state.
This might confuse some users thinking there's an error.
Turn all of them on instead.
Later on depthcharge will use the same LEDs to indicate dev mode status.
BUG=chrome-os-partner:44274
BRANCH=master
TEST=Boot firmware without anything else, note all leds on
Change-Id: I5cf19aabd2a59a61699ef491ae11424cf5a0c874
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2e1a332a5653fb76bbf8fe624274ec64d2b443a5
Original-Change-Id: I4c4e8940dd9cf1ac0301ac00bfc5992ba16e1589
Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/294065
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11398
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
only modify the MR3 value, there will always be some mickey not working properly.
After enable ODT, we use many mickey do tests, now functioning properly.
BRANCH=None
BUG=chrome-os-partner:43626
TEST=My mickey now boots up
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 681c169d59f5638d35b777eb2b7543e3b0dd90c8
Original-Change-Id: Ieb2b8a56054f91b6be81260e4c574425fb72fed3
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293324
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Original-Trybot-Ready: Douglas Anderson <dianders@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-(cherry picked from commit 5397c2f32f5851b9f514b0bd2ae68999a77cabbf)
Original-Reviewed-on: https://chromium-review.googlesource.com/294126
Change-Id: Icb3c839bebebfcae54fc6e96e9958c7020d49eff
Reviewed-on: http://review.coreboot.org/11396
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This replaces various timing mode parameters parameters with
an edid_mode struct within the edid struct.
BUG=none
BRANCH=firmware-veyron
TEST=built and booted on Mickey, saw display come up, also
compiled for link,falco,peppy,rambi,nyan_big,rush,smaug
[pg: extended to also cover peach_pit, daisy and lenovo/t530]
Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9
Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289964
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The value of 0x4 (60 Ohm) apperas to be causing lots of problems.
Since 0x1 (34.3 Ohm) was _almost_ right, let's try 0x2 (40 Ohm) and
hope it's the sweet spot.
BRANCH=None
BUG=chrome-os-partner:43626
TEST=My mickey now boots up
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 06db96e00d39972edbaf8429cbe88bbc66804e15
Original-Change-Id: If8b7d51d058ae000c0af189a648c62fa38a872ac
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291121
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-(cherry picked from commit 0dabadca1ab3bb310f85646d020bdcf672014071)
Original-Reviewed-on: https://chromium-review.googlesource.com/291291
Change-Id: Id32790c894c09616e32503aa790fa294093eca8a
Reviewed-on: http://review.coreboot.org/11386
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This basically does the same thing for firmware what CL:290631
did in the kernel. We want to keep the modem off until it needs
to be used to avoid enumeration/detection issues.
BUG=chrome-os-partner:43271
BRANCH=none
TEST=needs testing
Change-Id: I3b63a77c732dc4895b728b30f1dd71210a9c0e90
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a90ccd7fbffe44abe05e96341cc77067442c85e4
Original-Change-Id: I3516de1ea9160f7186ad7f5fb3b5d29ac73143b5
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290890
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Reviewed-on: http://review.coreboot.org/11385
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The NV security team requested that coreboot allocate the NVDEC
and TSEC carveouts. Added code to set up NVDEC (1 region, 1MB)
and TSEC (2 regions, splitting 2MB), and set their lock bits.
Kernel/trusted code should be able to use the regions now.
Note that this change sets the UNLOCKED bit in Carveout1Cfg0
and Carveout4Cfg0/5Cfg0 (bit 1) to 0 in the BCT .inc files
(both 3GB and 4GB BCTs) so that the BOMs can be written.
Any future revisions to these BCT files should take this
into account.
BUG=None
BRANCH=None
TEST=Built and booted on my P5 A44. Saw the carveout regions
in the boot spew, and CBMEM living just below the last region
(TSEC). Dumped the MC GeneralizedCarveoutX registers and
verified their values (same as BCT, with only BOM/CFG0 changed).
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: a34b0772cd721193640b322768ce5fcbb4624f23
Original-Change-Id: I2abc872fa1cc4ea669409ffc9f2e66dbbc4efcd0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290452
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-(cherry picked from commit f3bbf25397db4d17044e9cfd135ecf73df0ffa60)
Original-Reviewed-on: https://chromium-review.googlesource.com/291081
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Change-Id: I924dfdae7b7c9b877cb1c93fd94f0ef98b728ac5
Reviewed-on: http://review.coreboot.org/11381
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Do not guard the inclusion of "drivers/intel/gma/int15.h"
and "arch/interrupt.h" with configs that control option rom execution.
These headers already have the proper guards. The
install_intel_vga_int15_handler() is unconditionally called, even when
the header that declares it is guarded out.
Change-Id: Ia273437486f5802aa2b53212f2a1b5704c9485fa
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11379
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This seems like more of a debug option, than something that should
be forced to be enabled by the platform. Since it's causing a Kconfig
warning, I'm just removing it.
The alternative to removing it would be to add dependencies on
CONSOLE_CBMEM && !CONSOLE_SERIAL
Change-Id: Ifc4e4cbeea08a503c38827dd75e0e2e78e8a5eda
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11343
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This pach enables memory configuration based on PCH_MEM_CFG
and EC_BRD_ID.
BRANCH=None
BUG=chrome-os-partner:44087
CQ-DEPEND=CL:293832
TEST=Build and Boot FAB3 (Kunimitsu)
Original-Change-Id: I7999e609c4b0b3c89a9689ee6bb6b98c88703809
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293787
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I52a1af1683b74e5cad71b9e4861942a23869f255
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Reviewed-on: http://review.coreboot.org/11284
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Move all the various places that look at board specific GPIOs into
the mainboard gpio.h so it can be easily ported to new boards.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados p2
Original-Change-Id: I3f1754012158dd5c7d5bbd6e07e40850f21af56d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293942
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I93c4dc1795c1107a3d96e686f03df3199f30de8a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11282
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Implement the required Chrome OS specific handlers to read the
recovery mode, clear the recovery mode, read the lid switch state,
and read the write protect state using the appropriate methods.
Also update the Chrome OS ACPI device to use the GPIO definitions
that are exposed now by the SOC.
BUG=chrome-os-partner:43515
BRANCH=none
TEST=build and boot on glados and successfully enter recovery mode
Original-Change-Id: Ifd51c11dc71b7d091615c29a618454a6a2cc33d7
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293515
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia6ef83a80b9729654bc87bb81bd8d7c1b01d7f42
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The part number was the same as the H9CCNNNBLTLAR which means it
is not possible to distinguish the two based on part number alone.
This breaks mosys and thus the factory tests.
BUG=chrome-os-partner:43514
BRANCH=none
TEST=boot on glados P2 SKU3 and verify memory reported by mosys
Original-Change-Id: I606ef3989bd7273d134a258bc933088ccc865542
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293513
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7cea7cc4c61a20fda47673c8e25c431d391aa3bc
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11279
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add the ELAN touchscreen device in ACPI to bind it to the I2C
device at bus I2C0, address 0x10, interrupt 31 (GPP_E7).
BUG=chrome-os-partner:43514
BRANCH=none
TEST=boot on glados P2 and see touchscreen initialized by kernel
Original-Change-Id: I23b071b2767547baed239c94216cda6162d045dd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293512
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8a9492e6fa1f650cef0871329ae8944caffdaf5a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11278
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Clean up the device code for the glados mainboard, using
the defined values for interrupts by the SOC and moving the
various codec i2c addresses to the top of the file.
BUG=chrome-os-partner:40635
BRANCH=none
TEST=build and boot on glados
Original-Change-Id: Iead1aeb54363b15a6176d4f4a9511674195c0505
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293511
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I083c9ef6140e20a433cb2017e4c3cbc7a41e8fed
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11277
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
this patch enables SMBus in device tree for kunimitsu board.
BRANCH=none
BUG=none
TEST=built for kunimitsu; booted on kunimitsu fab3 and verified with
lspci
Original-Change-Id: I3b2b8c202b71c2a0c602169841978ed0c4d8bf8d
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292971
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id20e6cafda8664bd0ae3a5acecdd66c58c220694
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11276
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BRANCH=None
BUG=chrome-os-partner:44087
TEST=Build and Boot kunimitsu.
Original-Change-Id: I30ba8bad69a4fdf8ec29f9eb43a27d2e1c6b93dd
Original-Signed-off-by: pchandri <preetham.chandrian@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293832
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8f85547865387091c9a6400611e3314f457076d5
Signed-off-by: pchandri <preetham.chandrian@intel.com>
Reviewed-on: http://review.coreboot.org/11275
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patche enables the deep S5 and disables Deep S3.
Kunimitsu does not resume from deep S3. This change will
unblock the S3 resume path on kunimitsu board.
BRANCH=None
BUG=chrome-os-partner:42331
TEST=Built and booted on kunimitsu; check s3 works.
Original-Change-Id: Ia828a39bceef615fd194bb3614ba2de87c3af805
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/291250
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I07b95a324a27ab658e80674686b47b86412ea097
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11274
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move the CHROMEOS dependent symbols VIRTUAL_DEV_SWITCH and
VBOOT_DYNAMIC_WORK_BUFFER under the CHROMEOS config options for the
mainboards that use them.
Change-Id: Iad126cf045cb3a312319037aff3c4b1f15f6529d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11336
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
AMD family 10 boards don't use QRANK_DIMM_SUPPORT.
Change-Id: Id7e1fba86e2ea1d4d5f5c2e123bd36ad802fd15e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11344
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Add 'select MAINBOARD_HAS_NATIVE_VGA_INIT' which is just used as a gate
symbol to display MAINBOARD_DO_NATIVE_VGA_INIT to the mainboards that
are already selecting MAINBOARD_DO_NATIVE_VGA_INIT.
Since MAINBOARD_HAS_NATIVE_VGA_INIT is not used in any code, this should
not have any other effects.
This fixes the warning:
warning: (BOARD_SPECIFIC_OPTIONS) selects MAINBOARD_DO_NATIVE_VGA_INIT
which has unmet direct dependencies (VENDOR_ASUS && BOARD_ASUS_KFSN4_DRE
|| MAINBOARD_HAS_NATIVE_VGA_INIT)
Change-Id: I8ceee69ebae90dc32f55df58c2e80fe25397f049
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11301
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The AMD K8 northbridge uses the Kconfig symbol QRANK_DIMM_SUPPORT,
but the symbol was used on a number of Family 10 boards as well.
AMD Family 10 doesn't use this Kconfig symbol for anything.
I verified that the symbol wasn't used actually getting used in any
of these platforms.
Fixes Kconfig warnings for these 19 mainboards:
warning: (BOARD_SPECIFIC_OPTIONS...) selects QRANK_DIMM_SUPPORT which
has unmet direct dependencies (NORTHBRIDGE_AMD_AMDK8)
Change-Id: I454992a4975566fd6439a21f5a800d0cfa1b4d3b
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11300
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
|
|
Add CHROMEOS dependencies to selects for the following Kconfig
symbols:
CHROMEOS_RAMOOPS_DYNAMIC
CHROMEOS_RAMOOPS_NON_ACPI
CHROMEOS_VBNV_CMOS
CHROMEOS_VBNV_EC
CHROMEOS_VBNV_FLASH
EC_SOFTWARE_SYNC
LID_SWITCH
RETURN_FROM_VERSTAGE
SEPARATE_VERSTAGE
VBOOT_DISABLE_DEV_ON_RECOVERY
VBOOT_EC_SLOW_UPDATE
VBOOT_OPROM_MATTERS
VBOOT_STARTS_IN_BOOTBLOCK
WIPEOUT_SUPPORTED
This gets rid of these sorts of Kconfig errors:
warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has
unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS)
Note: These two boards would never actually have CHROMEOS enabled:
intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out
google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS
Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
CHROMEOS is a user-visible bool. It must not be 'select'ed in Kconfig.
That's why we have MAINBOARD_HAS_CHROMEOS. This is the fifth time I
find this being used wrong.
Why is this confusing/so hard to get right?
Change-Id: Icb4629355c63508f5a044b46842524b3d203c2da
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/11290
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
(1) Wifi is connected on RP1 which is 1c.0 , so enabling
1c.0 and disabling 1d.0
(2) kepler is on RP5 which is 1c.4, so enabling it
(3) enabling ClkReqSupport for RP1 and RP5 so that L1 substates can
get enabled.
BRANCH=None
BUG=chrome-os-partner:43738
TEST=Built and boot for Kunimitsu. checked all PCIe powersaving
states (LTR, L1, L1S) are enabled
Original-Change-Id: I525661399d1a4d939b53d5ed5f7991598b84ddcd
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/293482
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ib9a771a6ec137217668fb0385efc13b1824772b4
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: http://review.coreboot.org/11237
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The skylake SoC code now has macros for the previously
hard-code numbers for IRQs and GPEs. Switch over to using
those as they bring a little more clarity.
BUG=chrome-os-partner:43522
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: Ic8fcc59d680cdddec9dfbc3bf679731f6d786793
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/293411
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I594907005372100a3c9d17dda9d17769844ad272
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11234
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch enables the root ports and configures
the clock req numbers as per the design
On kunimitsu FAB3 board with D0 MCP
Root port 1 --> Wifi card --> clkreq 1
Root port 4 --> Kepler VP8/VP9--> clkreq 2
BRANCH=None
BUG=chrome-os-partner:43324
CQ-DEPEND=CL:*224327, CL:*224328
TEST=Built for Kunimitsu and Boot Kunimitsu board with D0 MCP
Original-Change-Id: I4e110d2d07efbfa7a306852301cd1cd89027b2ba
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290051
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Original-Tested-by: Naveenkrishna Ch <naveenkrishna.ch@intel.com>
Change-Id: I6d66c78496ac3f43e07d96feefed35cf50da6aa1
Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Reviewed-on: http://review.coreboot.org/11232
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the mainboard.asl file to support
Kunimitsu FAB3 board which is based on SKL D0 MCP.
BRANCH=None
BUG=chrome-os-partner:43324
CQ-DEPEND=CL:*224327, CL:*224328
TEST=Built for kunimitsu; booted on kunimitsu FAB3 with D0 MCP
Original-Change-Id: I31a315740d49125591591b20c296babe49004166
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/290050
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I81c22e407d1b3d420744eaf1d3f7ff4e8e749bcb
Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11231
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the GPIO table to support Kunimitsu FAB3
variant, based on SKL D0 MCP.
BRANCH=None
BUG=chrome-os-partner:43324
CQ-DEPEND=CL:*224327, CL:*224328
TEST=Built for kunimitsu; booted on kunimitsu with D0 MCP.
Original-Change-Id: I2343187a919f6d29161069135d97484191198056
Original-Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/289939
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I47302062788a90550fd38cb113e418b21d3f756c
Signed-off-by: Pravin Angolkar <pravin.k.angolkar@intel.com>
Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Reviewed-on: http://review.coreboot.org/11230
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Broadwell and Skylake chipsets, along with a few mainboards were
selecting ALWAYS_LOAD_OPROM without making sure that the dependency
for that symbol was met as well.
Looking at the dependencies for VGA_RUN_ROM, we see:
PCI && !PAYLOAD_SEABIOS && !MAINBOARD_DO_NATIVE_VGA_INIT
Since ARCH_X86 selects PCI, that's always met here.
Since Broadwell and Skylake don't have native VGA init yet, that's
not needed.
- Make sure that VGA_RUN_ROM is selected as well.
- Add dependency on !PAYLOAD_SEABIOS for both ALWAYS_LOAD_OPROM and
VGA_RUN_ROM symbols where they're selected.
Fixes Kconfig warning for these boards and chipsets:
warning: (BOARD_SPECIFIC_OPTIONS && BOARD_SPECIFIC_OPTIONS &&
BOARD_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS && CPU_SPECIFIC_OPTIONS)
selects ALWAYS_LOAD_OPROM which has unmet direct dependencies
(VGA_ROM_RUN)
Change-Id: I787a87e9467e1fc7afe8b04864b2a89b54824b9f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11246
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix the remark below for the mainboards qemu-i440x and qemu-q35.
Intel ACPI Component Architecture
ASL+ Optimizing Compiler version 20150717-32
Copyright (c) 2000 - 2015 Intel Corporation
dsdt.aml 336: Method(IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
ASL Input: dsdt.aml - 399 lines, 16756 bytes, 245 keywords
AML Output: dsdt.aml - 4000 bytes, 146 named objects, 99 executable opcodes
Compilation complete. 0 Errors, 0 Warnings, 1 Remarks, 233 Optimizations
Change-Id: Ibe48f872768ab8295d6fed3359d9eef04b736a05
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/11162
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order for the EC_SCI_L to work the GPE0 route needs
to be set along w/ the GPE event for the EC. As the GPE0
route is dynamic the EC_SCI_GPI needs to be set along
with the route so everything lines up. In this case, the
GPE0 route is set to the defaults such that GPP_C, GPP_D,
and GPP_E are routed to GPE0 block 0, 1, and 2, respectively.
This works out for glados because the EC_SCI_L is connected
to GPP_E16.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts
is incrementing as well as /sys/firmware/acpi/interrupts/gpe50.
Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/292011
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11210
Tested-by: build bot (Jenkins)
|
|
Set the EC_SMI_GPI define to be GPP_E15 and route that
GPIO for SMI generation. Also, the mainboard_smi_gpi_handler()
was introduced on skylake in order to process any GPI that could
generate an SMI. Switch to this handler so one can process the
appropriate events.
BUG=chrome-os-partner:43778
BRANCH=None
TEST=Used 'lidclose' on EC command line during depthcharge
to confirm EC_SMI_L generates SMI and shutdown happens.
Original-Change-Id: Ia365b86161670a809e3fa99dde38fccc612d5e77
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291934
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ic16ea8e8d6ff564977ed2081d2353c82af71adea
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11209
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The ec_smi_gpio and alt_gp_smi_en devicetree options are
goign to be removed. The plan for skylake is to set the
settings by the mainboard through either gpio pad
configuration or through helper functions.
Moreover, these values only allow *1* SMI GPIO configuration
in that the following has to be true:
alt_gp_smi_en = 1 << (ec_smi_gpio % 24)
If not, then another gpio(s) from the same group has the
SMI_EN bit set for it.
Lastly, remove all the subsequent dependencies as they are
no longer used: enable_alt_smi() and gpio_enable_group().
BUG=chrome-os-partner:43778
BRANCH=None
TEST=None
Original-Change-Id: I749a499c810d83de522a2ccce1dd9efb0ad2e20a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/291931
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2e1cd6879b76923157268a1449c617ef2aada9c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11204
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The skylake code is using IED_REGION_SIZE instead of
devicetree.cb. Drop the the option from the device trees.
BUG=chrome-os-partner:43636
BRANCH=None
TEST=None
Original-Change-Id: Ib252266060fbc6ed0eeaac19a6b79c173c6c9a13
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290932
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Trybot-Ready: David James <davidjames@chromium.org>
Change-Id: Ib08628e163ac27d4c49eddcbec6cab3252abd4aa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11200
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to run with the debug FSP the SMBus device needs
to be enabled. Additionally, the TCO block lives within
the SMBus device so if TCO is to be employed then the
SMBus device needs to be enabled as a prerequisite.
BUG=chrome-os-partner:42407
BRANCH=None
TEST=Buit and booted into kernel.
Original-Change-Id: I269650fa5222b4741ef495188dff1f4b8176fe89
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290364
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Change-Id: Ia1f72ea7bd70728de83cdff07df9810a326266c2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11181
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of relying on FSP to do gpio configuration in one
place use the native support in coreboot. This also removes
the open coded configuration of the memory configuration
ids.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built and booted glados.
Original-Change-Id: I4655221d821d91a2270d774305a02d6bd5c3959c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289800
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I2e66242d050c3825f6bc65d3d2c7f51d2cdfbd73
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11175
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable the Deep Sx pins to allow wake from the EC via LAN_WAKE#.
Report the EC wake pin LAN_WAKE as GPE[112].
BUG=chrome-os-partner:43079
BRANCH=none
TEST=suspend/resume on glados with wake from keyboard
Original-Change-Id: I99664e1e406d15e7460046a6168cbd3a377aaca4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288921
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I19db144ed5db183f47af03340886a5e770af8bc8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11171
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4afec92c57c6af4c99858afae53fa7746f47bc7a
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11159
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I6c5a2324d1a9e21f4e052678be8f0e0dbfed6494
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11136
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Derived from what the vendor BIOS is doing.
Change-Id: Ie2cba7b86b6bb3f1dcc4a5e1c189aa45d0aab109
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Found-by: fwts 15.08
Reviewed-on: http://review.coreboot.org/11142
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adapts Ia5101d5a1 for the p470.
Change-Id: Ib09a0bc58fddd6240834cc890f00df91a74f4161
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11160
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The used functions require the ELOG_GSMI feature, not just ELOG.
Change-Id: If38cf0b710d9236012bfb1f0b119c10f9e533a25
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This enables adding the GPU specific entries to the SSDT.
Change-Id: I04d0eb7bf6f3e28d89c9318b777875e8a78b1ab5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11140
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I37c5d8dd9353d4181046186688f20a3b85973562
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11153
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Spike support: QEMU RISCV is broken, and the maintainers at Berkeley
are working on it, but at the moment spike is the only way to test
on riscv. Add support for spike console output for debugging.
Privileged ISA: Update to privileged ISA in RISCV (machine,
supervisor, hypervisor, user modes) broke exisitng RISCV asm, and
bootblock.S was updated to match the new spec. Clean old assembly
[pg: things build with gcc 4.9 now, but don't expect them to work.
Hardcoding register names into the assembler language may not be the smartest
idea of the RISCV folks.]
Change-Id: Ie2c109d3c26712c207512f74f28ce1a925e6e181
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/11078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some FSF addresses found their way back into our tree.
Change-Id: I34b465fc78734d818eca1d6962a1e62bf9d6e7f3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/11145
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
vboot2 requires it
Change-Id: I63bc3f176af72da8ea172a09aa536a10f1184b14
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/11099
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch resolves the outstanding issues with
PCI device enumeration and getting the board to boot into
GNU/Linux with VGA rom.
Previously the board would not boot to GNU/Linux with video,
even if VGA rom was used.
Bugs in the devicetree were fixed according to superiotool output.
Tested on GA-B75M-D3H with VGA rom.
Booted to GNU/Linux (Fedora 22 4.0.4-301.fc22.x86_64)
Change-Id: Ide1f406652659e6f99ee5d993719c187650fffe4
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/10895
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
1. Use enable_imc_thermal_zone to enable fan control.
2. The ACPI method ITZE works on Ubuntu 14.04 and Windows 7
but does not work on Windows 8, so I didn't use it.
After this issue is fixed, I'll add ACPI_ENABLE_THERMAL_ZONE
in bettong/Kconfig.
3. Fan control works on Bettong. I used "APU Validation Toolkit"
to test on Windows 8. This tool can put load to APU. The fan's
behaviour is just like bettong/fchec.c defined. When the temperature
is 40 Celsius, the fan start to run.
Change-Id: I0fc22974a7a7cf3f6bdf5f1c66be95219a177e12
Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com>
Reviewed-on: http://review.coreboot.org/10721
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Remove the items that are obviously broadwell left or become no-need
with fsp.
BUG=chrome-os-partner:43186
BRANCH=None
TEST=build and boot on sklrvp3.
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Change-Id: I5dfd62363eecc514e45a7b7ba0961ec7fe0499ee
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 570920cdc9e9c08ee85dcb08998069f1cae2d3cd
Original-Change-Id: I63176584042516c4d28f1bb6403e7bbe5de61010
Original-Reviewed-on: https://chromium-review.googlesource.com/288833
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: http://review.coreboot.org/11072
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Copied from Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769
BUG=chrome-os-partner:43022
BRANCH=None
TEST=Used physical recovery button to enter dev mode on rialto
Change-Id: I39fd13fee3b9f272f3dc08a447091e05a3d74741
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: eed0652f84cba963044908bb91aac7b8c1c81fd4
Original-Signed-off-by: Jonathan Dixon <joth@chromium.org>
Original-Change-Id: I388d8bb0faa93b54540be095e68450192592a093
Original-Reviewed-on: https://chromium-review.googlesource.com/287660
Original-Reviewed-by: Jason Simmons <jsimmons@chromium.org>
Reviewed-on: http://review.coreboot.org/11069
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Modify MR3_I/O Configuration, Change 34.3 ohms to 60 ohms. This
resolves an issue that was observed on some Mickey boards with
the Samsung 2GB LPDDR3 and is believed to be caused by inferior
routing on the small PCB. (Elpida 2GB LPDDR3 seems unaffected.)
BUG=chrome-os-partner:41905
TEST=Boot from mickey
BRANCH=None
Change-Id: Ic20d9eceb00658c214fd032a2f213dbe0d51a91b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1305010aee6818910ad1dec26d9d948505ca281e
Original-Change-Id: I5517e07fc5716ed4cd58e5502f13ccd61ffb5357
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286333
Reviewed-on: http://review.coreboot.org/11051
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The PLLU and UTMIPLL power-up sequences have been fixed in the
kernel. It's no longer necessary for the XUSB partitions to
be ungated at boot.
This reverts commit 3a4a8a97c1851b6f3dd211451d9678358fac3ad7.
BUG=chrome-os-partner:41244
TEST=Build and boot on Smaug; xHCI still works.
BRANCH=none
CQ-DEPEND=CL:282765
Change-Id: Id9a1c9960b6c7286b3185c60371d864874f50bb3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d52e50240bca62997af729722fbcdf5226438b7f
Original-Change-Id: Ieb9c8644a5fb108d77703933fde82d359f403fd1
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286810
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Mark Kuo <mkuo@nvidia.com>
Original-Reviewed-by: Mark Kuo <mkuo@nvidia.com>
Reviewed-on: http://review.coreboot.org/11050
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chromium:513990
TEST=google/stout builds
Change-Id: I00de7524297e4471a9f7d6afd0d2b991d29020e9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: b85c54af7d4def45f014ee1d9b79df0b649f90f7
Original-Change-Id: I0870dd11c97cecc932a135f73be8234a88c0622b
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288860
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11064
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chromium:513990
TEST=google/parrot builds
Change-Id: I5e354d6160e554f1c41e84eac6102e84de34b81d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: d5a6253e6f19815736a6b433f6c58e3be2e5841b
Original-Change-Id: I3a3bf9ead333d56472f856c9efefff239fb70586
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288852
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11063
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chromium:513990
TEST=google/butterfly builds
Change-Id: Ia678ca4b0778ee4a2e55ba44a5d89ac6dd691b35
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 0d82ea2090fae9c66f41ee05cc20a9b22d3641c0
Original-Change-Id: I2fea10c17b769ca76b9d0b80978b4c512ed8c680
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288851
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11062
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add some board specific code to enable the memory configuration
GPIOs in GPIO input mode and read them to determine which
memory type is on the board.
Also add the other memory types that are not yet present in
the glados mainboard directory.
This should be replaced with the real gpio infrastructure once
it is ready.
BUG=chrome-os-partner:43069
BRANCH=none
TEST=build and boot on glados
Change-Id: I7a9ce10e92ad6681528572e87b6cfee29880841a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d81e969c5950fd89bb745d1403abddb08a942f83
Original-Change-Id: Iffb0bd5c176f2adbdd9302d9bff5b7bde725d671
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287436
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11046
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable 20K internal pullup for the EC_IN_RW GPIO.
BUG=chrome-os-partner:42285
BRANCH=none
TEST=build and boot on glados
Change-Id: I499164fb5050d350510072d2a06eb97fb7f9fcb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2de7d4800797a1585165a34dd39af3d635b1f55
Original-Change-Id: I7af1b78482197701aa452998106c2c3476fcc330
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287437
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11045
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The audio codec nau8825 and two ssm4567 speaker amps are instantiated
via ACPI.
BUG=chrome-os-partner:41280
BRANCH=none
TEST=The devices are instantiated. Speaker/headphone playback works on glados.
Change-Id: I1297c2435b3051dd749ad7de324b64ba1504cf09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59e5eb2682a2fc2cb58068dfcb6dd2415d43b286
Original-Change-Id: Ib7ec8c868251601f67cdf365cd3e935d256c8ac5
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282364
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
some jerry panels need more delay time between the vcc_led and bl_en,
so we extend the delay time from 20ms to 120ms.
BUG=chrome-os-partner:42997
TEST=Boot from jerry, and do not flicker again
BRANCH=none
Change-Id: Ifcf84578038eb5c2e5a0dfae936ee63cef671968
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b00b6bd108f0aae461085d00819eca08ec892b3
Original-Change-Id: I74999601b41ccac22493cc9cd0bf52cd4dbb8c26
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287373
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I658f88189857e25dde474d59875650f72c680818
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10972
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus
KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC
bridge register 0x78 (particularly the 0x7b byte) to get to ramstage:
Assume that there's something about this register that adjusting it the
way we do for K8 is something that can/should be universally avoided on
all Fam10h systems with these chipsets.
Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10984
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
BUG=chrome-os-partner:43022
TEST=None
BRANCH=None
Change-Id: I41c904603e7213da1c8d8e0945b572f6ba844031
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d91722317ffc55a4848e8e3bdac8412218fe1dc4
Original-Change-Id: I1ed4c7aaa35158815f8f7a94eafb77db55a381d0
Original-Signed-off-by: Jonathan Dixon <joth@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287300
Original-Reviewed-by: Jason Simmons <jsimmons@chromium.org>
Original-Reviewed-by: Karl Townsend <karlt@chromium.org>
Reviewed-on: http://review.coreboot.org/11036
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update the write protect GPIO reported in ACPI to be 71 which
is GPP_C23. Also update the controller id to INT344B:00 which
will point at the sunrisepoint device in /sys/class/gpio.
BUG=chrome-os-partner:42560
BRANCH=none
TEST=verify crossystem output with and without WP enabled
Change-Id: I625859bd8ac371a5c0cae18697dccf216c26a8b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8fc5cb6b72dacd6aefe69fe8204f4e0d209ed8a4
Original-Change-Id: I04892e75f9bfe739c44eb40e7c6a969c33e157ca
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286842
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11035
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The FSP memory info hob does not return this data so we need
to supply it from the SPD included with the mainboard.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=execute "mosys memory spd print all" on glados
Change-Id: Idfb71d36d1f8163d0daceb68675b10194db7cde7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7feece45900e5166864927047ad3ab7b997f8258
Original-Change-Id: Id2bc544ac5faf53f0f676fe132fea1db5640a401
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286877
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11034
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The write protect gpio is not added to the gpio map
so the structure is not valid for vboot to consume.
BUG=chrome-os-partner:42560
BRANCH=none
TEST=build and boot on glados, check basic crossytem output
CQ-DEPEND=CL:286911
Change-Id: I228d75049b919449072e395699c822203a08f1c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d15438c4bf56d92189f2f501a62b55b5d00ba461
Original-Change-Id: I3290c4b96e1cc675c618a983915b778f11175020
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286930
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11031
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
No devices are connected to i2c4 bus on
both strago and cyan board.
Hence disabling the ALS platform data.
This will fix the i2c4 timeout issue and
also help in boot time optimization.
Removed unused macros.
BUG=None
BRANCH=chrome-os-partner:41934
TEST=After booting to kernel, i2c4 timeout
error message should not appear in dmesg.
Change-Id: Ib7ab4c95b0830a8d4e53c6c0ee919649ad1ed354
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c52b64037b46016fe01f1d55c4c58f7684eb778
Original-Change-Id: Ia7acdcef67a2f2837866f56aa0426a02ee05db46
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283608
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11005
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In BCRD2, RTEK audio codec is connected to I2C4.
Create a RTEK device entry on I2C4 to enable Audio
on BCRD2. In BCRD1, RTEK device is connected to I2C2.
Having two devices with same HID breaks the Audio
on BCRD2 even if I2C2.RTEK._STA returns 0. The Audio
codec driver in kernel is hard coded to use first
instance of the device (:00). When two devices are present
with same HID, first device gets an instance number :00
even though _STA returns 0. Second device which is on I2C4
and POR for BCRD2 assigned with instance number :01. The
device with :01 is not getting enabled since the Audio codec
driver supports only :00. This need a proper fix in kernel
which is in the pipeline. Audio on non BCRD2 platforms on
Strago build would be disabled since RTEK device is not present
on I2C2.
BRANCH=None
BUG=None
TEST=Build and boot the system
Change-Id: Ia97d011c951275e6179c8b79a22c496b8169356b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d71a41ee703e6f60299b9e31a408af2ca06d8e24
Original-Change-Id: I4b032e930e46da77474f8f5969e95f9560b3e905
Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285193
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com>
Reviewed-on: http://review.coreboot.org/11003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3cf6a579f4e62a59828e81aa63c3a1a020a15ea6
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10906
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:42881
BRANCH=None
TEST=Using ctrl-d in recovery mode to switch to dev mode works.
Change-Id: Iefbd11d435c4beb570875d4835a085b194d1d1e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: be172409792a224855b1d31621f23d1969d319b9
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Change-Id: Icf57dfc4cc258aa2cba341f40d285f8c843aace5
Original-Reviewed-on: https://chromium-review.googlesource.com/286612
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11013
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The GPIO mapping was incorrect for wpsw_cur.
The GPIOs for East community were in two ranges:
0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and
12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26]
The discontinuity was not accounted for, hence the error.
The original offset was 0x16 whereas it should be 0x13
BUG=chrome-os-partner:42798
BRANCH=None
TEST=Run crossystem and test wpsw_cur entry. If screw is present,
it should be 1 and if not present, it should be 0
Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd
Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286534
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11010
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Document the lid open state and separate the routines with a single
blank line.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: I244f20c03bc7530ad8d140fba41dd97c12c079e1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 57313253fdef3f2d3f0e16b8ab8aa91202d45b16
Original-Change-Id: I7b3bd9cf16e915d214eb2de0017a8d91a934b112
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286267
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11009
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove the address from the copyright notices.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ibe8196841d9e76c9ee3a3dbae802ecc63dc7904c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cc12d2658324a375d02748098f0a2f4b5d1b5615
Original-Change-Id: I81a71e4ad9b8a66ad0e9a93cbeb512d90eb35906
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286266
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11008
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Tested-by: build bot (Jenkins)
|
|
Charger performance states table defines charger current limit for each
p state. Modify charger current control values for SANYO battery used
in Cyan.
BUG=None
BRANCH=None
TEST=System is charging battery, in shell window, issue command
"echo 0 > /sys/class/thermal/cooling_device4/cur_state",
"echo 1 > /sys/class/thermal/cooling_device4/cur_state",
"echo 2 > /sys/class/thermal/cooling_device4/cur_state",
"echo 3 > /sys/class/thermal/cooling_device4/cur_state", or
"echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC
console show different charging current value.
Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc
Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09
Original-Signed-off-by: li feng <li1.feng@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285605
Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-on: http://review.coreboot.org/11004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the Serial IO modes for UART2 to PCI mode
in devicetree for glados board.
Also we switch over to CONSOLE_SERIAL8250MEM_32 here. 8-bit
legacy UART will stop working after devicetree change.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for glados and tested LPSS logs on glados.
CQ-DEPEND=CL:284881 CL:284882 CL:284883
Change-Id: I433979c852c80848c006ef089b43d75a17e761c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c37519e0762801cbb9b547b538b385c84299189
Original-Change-Id: I2faec08d089e407c5ab9838bea980553f49821c4
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch updates the Serial IO modes for UART 1 and 2
in devicetree for kunimitsu boards.
UART1 are disabled and
UART2 is in PCI mode.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for kunimitsu and tested LPSS logs on Kunimitsu.
Change-Id: I5a46ab9e0b792478ee2e0845aeab1443423a2fac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38c7b963a9d679ee5106c5343e1173d0b5056627
Original-Change-Id: I39cbb6bb0991e5f9b3365adaf6b24818d112cd1a
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284825
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11001
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the Serial IO modes for UART 1 and 2
in devicetree for sklrvp boards.
UART1 is disabled and
UART2 is in PCI mode.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for sklrvp and tested LPSS logs on RVP3.
Change-Id: I59a657d6a3744040ec6be290ba966672e0e5f17e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5a20a70801d66abd87d4214e1ef187b86eed99da
Original-Change-Id: I381374272e1824ca8887ea5c5662215dde2c0a56
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284824
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0c196ff84484717c59c59d11bb7230b5920e0654
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10997
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On Skylake, only UART2 is supported as debug port and the macros
INTEL_PCH_UART_CONSOLE_NUMBER, INTEL_PCH_UART_CONSOLE and the partial
code for UART0, 1 are cleaned up for Skylake and Sklrvp, Kunimitsu and
Glados boards.
BRANCH=none
BUG=chrome-os-partner:40857
TEST=Built for kunimitsu, checked the coreboot logs on LPSS UART2
Change-Id: I2fbcfb1d1ca6f59309a77c67d022cf4f5da7f7c0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e714c18d462bc7bdd7068309fb6be77da6973642
Original-Change-Id: I9343abd90ce685ea2d676047dccbefad7457b69f
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10994
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disabling the wwan gpio line
since wwan is not used.
BRANCH=none
BUG=none
TEST=wwan should not connect to network on cyan/strago.
Change-Id: I9d2e5d5b185a4622218e894d3b092afe15e09289
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a20c602b3bb768baa38b17e21cb4e5b0d9249ef
Original-Change-Id: Ib8d5fd15a172ef898ce675a85c2ea3e5f5c79144
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285304
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch selects the config symbol PCIEXP_L1_SUB_STATE to enable L1
substate for PCIe.
BRANCH=None
BUG=chrome-os-partner:42331
TEST=Build for sklrvp; boot and check "dmesg | grep iwl" shows
"L1 enabled and LTR enabled"
Change-Id: I97552c7700649a9f5d8646a03027c5c5e0b477b4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d3115816fbdd11c7f8ff418e0b5c86b8650c8b83
Original-Change-Id: Iaf307cb2d623cc1ce97b01d15a6b42569fd0c0c4
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284775
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:40526
BRANCH=None
TEST=Verify that system boots when used with coreboot and EC
versions that also have Software Sync enabled.
Change-Id: I6ed562fa51d83ddf16fc74d35db7c0004f57c79e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 090a66c50fac21808c4721a32b1728cc904f1b00
Original-Change-Id: Ia4d87d9a177c579567c03ae113889a277ffecee0
Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283573
Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/10985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BOOT_MEDIA_SPI_BUS is int, not hex.
Change-Id: I5cbcc3889a025caab921208037c8a61d224078a7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10973
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: If933a70992a6ae8228eef8d4f0386387b4e4549d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10966
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
