summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2022-06-28mb/google/brya/var/skolas4es: use i2c1 for TPM for skolas4esNick Vaccaro
This change sets DRIVER_TPM_I2C_BUS to the i2c 1 bus for TPM for the skolas4es variant. BUG=b:230773725 TEST=None Change-Id: I12b05cdacdd26bfffff47b7a3fb127aa7778f15d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65493 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-28mb/acer/aspire_vn7_572g/devicetree.cb: Drop obsolete commentAngel Pons
`chipset_lockdown` is no longer configured in this devicetree. Change-Id: Iaaacd471ab873f150d7a74bba612130c33641c64 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
2022-06-28mb/google/skyrim: Add SoC thermal zoneFred Reitberger
The temperature values were taken from guybrush as a starting point for skyrim. BUG=b:230428864 TEST=Boot skyrim to OS and verify thermal zones are populated and working in /sys/class/thermal/ Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I6669b32f5e3dd63c6523f74166089eb4eb2d7848 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-06-28mb/google/nissa: Change pen garage wake to EV_ACT_DEASSERTEDEric Lai
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake pin that interrupts the system in active operation when the stylus is removed. After confirmed with the owner, the expect behavior is only wake when eject the pen. BUG=b:233159811 TEST=EC wake event work as expected. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I7a82e5e8935c9ea27e923661f66809e9169bc86a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65379 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-28mb/google/nissa/var/xivu: Add MIPI WFC supportIan Feng
Add MIPI WFC based on schematics BUG=b:236576117, b:235446911 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I85bd2ba187729a55c00369b218ca0414e0162b9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-06-28mb/google/nissa/var/xivu: Modify SPI flash to 16MIan Feng
Follow latest schematic to modify SPI flash to 16M. BUG=b:236576117 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I56be68b962c38d3f885dcf25a0251b8d9ab6ff3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65446 Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-06-27mb/google/brya/var/kinox: Modify ddi_ports_configDtrain Hsu
Modify ddi_ports_config based on schematic Kinox_SCH_20220602.pdf. DDI_PORT_A = DP DDI_PORT_B = HDMI DDI_PORT_1 = Type-C DP DDI_PORT_2 = DP or HDMI BUG=b:233338341 TEST=Boot to Chrome OS and check all display port working Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ib2dbb34af1f85585b77638710d3799520c3f016f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-27mb/siemens/mc_apl7: Disable VBOOT and TPMUwe Poeche
mc_apl7 does not use security features like VBOOT and TPM. Test: flash mc_apl4 mainboard and ensure the disabled features via log. Change-Id: I16683b92deb047208848b69c5aa79dc4212ce930 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65284 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-06-27mb/google/corsola: Add new board TentacruelKane Chen
Add a new board 'Tentacruel', and enable SDCARD_INIT for it. BUG=b:234409654 BRANCH=corsola TEST=none Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ia10efeead575b4e193a73562275a78839415a706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65192 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-27mb/google/nissa: Apply gpio padbased table overrideEric Lai
In order to improve gpio merge mechanism. Change iteration override to padbased table override. And the following patch will change fw config override with ramstage gpio table override. BUG=b:231690996 TEST=check gpios in pinctrl are the same. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I3d0beabc2c185405cb0af31e5506b6df94e9522c Reviewed-on: https://review.coreboot.org/c/coreboot/+/64713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-26mb/emulation/qemu-armv7,power8: Do resource transitionKyösti Mälkki
Change-Id: Ic31eb81bc98fd94877a51ebf44cfb2c69e4db0ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55923 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-24sc7280: Enable RECOVERY_MRC_CACHEShelley Chen
Enable caching of memory training data for recovery as well as normal mode. We had HAS_RECOVERY_MRC_CACHE selected in the sc7280 Kconfig, but never allocated a RECOVERY_MRC_CACHE in the herobrine fmap so it never worked. Adding RECOVERY_MRC_CACHE and also removing RO_DDR_TRAINING, RO_LIMITS_CFG, RW_LIMITS_CFG entries which have been deprecated. BUG=b:236995289 BRANCH=None TEST=run dut-control power_state:rec twice and make sure that DDR training doesn't run on the second boot. Change-Id: I39ac7eca4ae94075874324b13c69eef59522e3c5 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-06-24mb/google/brya/{var/agah,acpi}: Update GPU GCOFF sequence for power downTim Wawrzynczak
We have clarified the powerdown sequence with Nvidia, and the EEs have come up with this modified sequence which still meets the requirements from the hardware design guide. BUG=b:233959099 TEST=Verified by ODM and EE Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I37715165ab488f994c825fb9ff532ebf8d7f4cb0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-24mb/google/brya/var/osiris: Disable PCH USB2 phy power gatingDavid Wu
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for osiris board. Please refer Intel doc#723158 for more information. BUG=None TEST=Verify the build for osiris board Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ia30a7b915df14c91a2526dca3e374436da286b7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-06-24mb/google/nissa/var/xivu: Update overridetreeIan Feng
Update override devicetree based on schematics. BUG=b:236576117 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2986ae6fd1f51efc6b9bb18ff2b7186357e55fcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-24mb/google/nissa/var/xivu: Update gpio settingsIan Feng
Configure GPIOs according to schematics. BUG=b:236576117 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I8c4347fcc975ed994261c7738e5ef811a12e4b0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/65288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-24mb/google/brya/var/crota: Modify some GPIO programmingTerry Chen
Base on bernadino 14 adl-p 20220531.pdf, configure GPIOs according to schematics. GPP_B2 => BYPASS_DET GPP_F19 => FP_USER_PRES_FP_L BUG=b:234384954 TEST= USE="project_crota" emerge-brya coreboot Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Ic2e7ecc34912f07463e0025787fdf59c7602e40b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-24mb/google/brya: Add `ext_pm_support` for volmar eMMC SKUSubrata Banik
This patch ensures google/volmar eMMC SKU has advanced PM support enabled. BUG=b:235915257 TEST=Able to boot to eMMC SKU to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3e2883d894d2ca7f810f4b72af1c12037c8fdabc Reviewed-on: https://review.coreboot.org/c/coreboot/+/65244 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-06-24mb/google/brya/var/taniks: Modify DPTF setting for taniksJoey Peng
Adjust sensor trigger point and fan duty according to thermal team tuning results. BRANCH=brya BUG=b:215033682 TEST=Built and tested on taniks board Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I8135684d471fdcfdbbe2f1bc5455902d56bb71de Reviewed-on: https://review.coreboot.org/c/coreboot/+/65287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-24mb/google/brya/var/volmar: Disable PCH USB2 phy power gatingRen Kuo
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for kano board. Please refer Intel doc#723158 for more information. BUG=None TEST=Verify the build for volmar board Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I4d12f7214a306ded54b4536a27fe0fb7f3c33b8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-23mb/siemens/mc_apl1: Add new mainboard variant mc_apl7Uwe Poeche
This patch adds a new mainboard variant called mc_apl7 which is based on mc_apl4. So far only the names have been adjusted with no further changes. Following commits will introduce the needed changes for this mainboard variant. Test: build mc_apl7, flash to mc_apl4 and compare log level 8 output Change-Id: Ie9f2f5c29d071de442f8f3e3eaf4b3c2a6b8920f Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65283 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-23mb/google/nissa: Skip locking for GPP_F14 GPIOMaulik V Vaghela
There is an existing issue for nissa boards where wake up from RTC wake is not working during suspend_stress_test. This issue was root caused to the patch which was setting GPE_EN bits for the GPIOs before locking. Reference: https://review.coreboot.org/c/coreboot/+/64089 Later issue was found to be with GPP_F14 configuration for nissa boards. When coreboot skips setting GPE_EN bit for GPP_F14, RTC wake works properly. Another way to make it work is to skip locking GPP_F14 GPIO to allow kernel to configure it properly. This patch skips the locking for GPP_F14 to allow kernel to configure it later. This fixes the issue of RTC wake not working. Note: This patch provides workaround for the existing issue and BUG will be closed once actual reason is identified and proper fix is available. BUG=b:234097956 BRANCH=None TEST=RTC wake works on Nivviks board with the patch. Change-Id: Ie8091ab8acf2b3f064cb79bdf4700f6b4c1674a5 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-06-23mb/google/nissa/var/xivu: Generate RAM ID and SPD fileIan Feng
Add the support RAM parts for Xivu. Here is the ram part number list: DRAM Part Name ID to assign MT62F1G32D4DR-031 WT:B 0 (0000) MT62F512M32D2DR-031 WT:B 1 (0001) H9JCNNNBK3MLYR-N6E 1 (0001) K3LKBKB0BM-MGCP 2 (0010) BUG=b:236576117 BRANCH=None TEST=Use part_id_gen to generate related settings and emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I02866f7dcdc70d1051d187fdda30e04bb654ece3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65252 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-23mb/google/brya: Create xivu variantIan Feng
Create the xivu variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:235025984 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_XIVU Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I12341a2414e58ebc1c22429d35a03afef27adace Reviewed-on: https://review.coreboot.org/c/coreboot/+/65235 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-23mb/google/guybrush/var/dewatt: Update telemetry valueKenneth Chan
AMD SDLE testing had been done. Apply the following telemetry settings for dewatt DVT: vdd scale: 91573 vdd offset: 620 soc scale: 30829 soc offset: 235 BUG=b:234417498 TEST=1. emerge-guybrush coreboot 2. pass AMD SDLE test Change-Id: I46650ca12ccfec90f15ee562d30c62c389d14d39 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-06-23mb/google/brya/var/ghost4adl: Add more memory partsJack Rosenthal
Add support for MT62F512M32D2DR-031 WT:B and K3LKLKL0EM-MGCN. These will be used as backup parts if there is issues getting the Hynix parts. BUG=b:233822880,b:236423310 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I6ace8788ffb2ec40d01b91d0a4d751e0a95883f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-06-23mb/google/brya/var/ghost: Add auto-generated GPIO config from ArbitrageJack Rosenthal
Arbitrage is an internal tool at Google to work with schematics programatically. In particular, it features an "export-coreboot-gpio" command, which, does it's best to try and make a gpio.c from the schematics to avoid human errors when translating to C code. This commit adds a gpio.c generated by running: "arb export-coreboot-gpio ghost4adl:P0_2022_06_17" This GPIO config will require hand modification. This is done in a follow-up CL. (i.e., this CL intentionally leaves the config exactly how it was generated by Arbitrage so we get a good diff on the changes we needed to make) BUG=b:234626939,b:231719130 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I35a85202768a366357073d3ebc177d0e0da661f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65210 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-23mb/google/brya/var/ghost4adl: Enable TCSS display detection by defaultJack Rosenthal
Initial boards will not have an internal panel. Enable TCSS display detection so we can boot on an external panel over Type-C. BUG=b:235294840 BRANCH=firmware-brya-14505.B TEST=emerge-ghost coreboot Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I6f65ddc24701d6f6ad0250560cc05b5e1d32370f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-06-22mb/google/brya/var/kinox: Refactoring update_power_limits functionDtrain Hsu
Based on 'commit 0b917bde36a7 ("mb/google/brya/var/kinox: Set power limit based on charger type")' to refactoring update_power_limits function for kinox. BUG=b:231911918 TEST=Build and boot to Chrome OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I1fcb593090f95bf23808e577dd11b8a836f47494 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-22security/vboot: Deprecate VBOOT_VBNV_ECYu-Ping Wu
Boards using VBOOT_VBNV_EC (nyan, daisy, veyron, peach_pit) are all ChromeOS devices and they've reached the end of life since Feb 2022. Therefore, remove VBOOT_VBNV_EC for them, each with different replacement. - nyan (nyan, nyan_big, nyan_blaze): Add RW_NVRAM to their FMAP (by reducing the size of RW_VPD), and replace VBOOT_VBNV_EC with VBOOT_VBNV_FLASH. - veyron: Add RW_NVRAM to their FMAP (by reducing the size of SHARED_DATA), and replace VBOOT_VBNV_EC with VBOOT_VBNV_FLASH. Also enlarge the OVERLAP_VERSTAGE_ROMSTAGE section for rk3288 (by reducing the size of PRERAM_CBMEM_CONSOLE), so that verstage won't exceed its allotted size. - daisy: Because BOOT_DEVICE_SPI_FLASH is not set, which is required for VBOOT_VBNV_FLASH, disable MAINBOARD_HAS_CHROMEOS and VBOOT configs. - peach_pit: As VBOOT is not set, simply remove the unused VBOOT_VBNV_EC option. Remove the VBOOT_VBNV_EC Kconfig option as well as related code, leaving VBOOT_VBNV_FLASH and VBOOT_VBNV_CMOS as the only two backend options for vboot nvdata (VBNV). Also add a check in read_vbnv() and save_vbnv() for VBNV options. BUG=b:178689388 TEST=util/abuild/abuild -t GOOGLE_NYAN -x -a TEST=util/abuild/abuild -t GOOGLE_VEYRON_JAQ -x -a TEST=util/abuild/abuild -t GOOGLE_DAISY -a TEST=util/abuild/abuild -t GOOGLE_PEACH_PIT -a BRANCH=none Change-Id: Ic67d69e694cff3176dbee12d4c6311bc85295863 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-06-22mb/google/brya/var/taeko: Modify DPTF setting for tarloJoey Peng
Adjust sensor trigger point and fan duty according to thermal team tuning results. BRANCH=brya BUG=b:215033683 TEST=Built and tested on tarlo board Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ib543cee82f6940ab35a1a40af1d41bb2b8bf8521 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-22mb/starlabs/lite/{glk/glkr}: Disable UFS deviceSean Rhodes
Disable 1d.0 UFS as it is not used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib392bc64db440ea3d98ee62536d5395587a3f6aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-06-22mb/google/skyrim/variants/baseboard: enable iommuJason Glenesk
With IOMMU disabled, kernel complains that 'IOMMUv2 functionality not available on this system'. Enable iommu in devicetree for skyrim proto board in order to allow kernel to load and initialize IOMMUv2. BUG=b:232750390 TEST=Boot to Chrome OS on skyrim board, and grep dmesg for "AMD IOMMUv2 loaded and initialized" Change-Id: I2f10f5eda8083335619a34c44df253b8e5a8572c Signed-off-by: Jason Glenesk <Jason.Glenesk@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-06-22mb/intel/adlrvp: Enable early EC sync for ADL-NUsha P
Enable VBOOT_EARLY_EC_SYNC in coreboot. EC Sync was failing on ADL-N RVP since the ec image was not getting stitched into coreboot during emerge build. This is now fixed with https://crrev.com/c/3705002 and hence enabling the EC sync for ADL-N RVP BUG=b:232875824 TEST=Build and boot adlrvp-n. Ensure EC Software sync is complete. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Ibea37825abd0f13a5184cbbe96c38d44474782f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2022-06-22mb/google/brya/var/kinox: Enable PCIe WLANIan Feng
Enable PCIe WLAN for Kinox 1. Enable PCI port 5 for PCIe WLAN 2. Enable CLKREQ, CLK SRC 2 for PCI port 5 BUG=b:236175551 TEST=Build and boot to OS in Kinox. Ensure that the WLAN module is enumerated in the output of lspci. localhost ~ # lspci 02:00.0 Network controller: Realtek Semiconductor Co., Ltd.Device c852 (rev 01) Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I3fbeadc85c9c88f5d178326dbbc83762083fe59a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65168 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-06-22device/resource: Add _kb postfix for resource allocatorsKyösti Mälkki
There is a lot of going back-and-forth with the KiB arguments, start the work to migrate away from this. Change-Id: I329864d36137e9a99b5640f4f504c45a02060a40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64658 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-21mb/google/nissa/var/joxer: add generic LPDDR5 SPDs for JoxerMark Hsieh
Add Makefile.inc to include five generic LPDDR5 SPDs for the following parts for Joxer: DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) MT62F1G32D4DR-031 WT:B 1 (0001) H9JCNNNBK3MLYR-N6E 0 (0000) H58G56AK6BX069 2 (0010) K3LKBKB0BM-MGCP 2 (0010) BUG=b:236576115 TEST=USE="project_joxer emerge-nissa coreboot" Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I90acb436bccd5dae8585436316246c50fc256842 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-21mb/intel/adlrvp: Select the right Kconfig for raptorlakeUsha P
CL 64619 adds the required initial code for raptorlake. Select BOARD_INTEL_ADLRVP_RPL_EXT_EC for VBOOT_MOCK_SECDATA which is mistakenly not selected. BUG=None BRANCH=firmware-brya-14505.B Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I5da561cb31b0cb0d574a8091cc346d6b321ac6fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/65165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-21security/vboot: Add support for GSCVD (Google "RO verification")Julius Werner
This patch adds a new CONFIG_VBOOT_GSCVD option that will be enabled by default for TPM_GOOGLE_TI50 devices. It makes the build system run the `futility gscvd` command to create a GSCVD (GSC verification data) which signs the CBFS trust anchor (bootblock and GBB). In order for this to work, boards will need to have an RO_GSCVD section in their FMAP, and production boards should override the CONFIG_VBOOT_GSC_BOARD_ID option with the correct ID for each variant. BUG=b:229015103 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1cf86e90b2687e81edadcefa5a8826b02fbc8b24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-21mb/starlabs/lite/{glk/glkr}: Disable Sata Port 1Sean Rhodes
Disable Sata Port 1 as it is not used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I93ecdaba5d1ce96ddcf3695edd7fb109054743e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-06-21mb/starlabs/lite/glkr: Don't configure GPIO's 147 through 156Sean Rhodes
These are configured by the TXE, so they do not need to be configured. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I13957992d637a53203b4328e39c0e6607e017891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-21mb/starlabs/lite/glkr: Simplify GPIO macro'sSean Rhodes
Use shorter macro's to conifgure GPIO's. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I926aac8679f847cd963be07786e9fe2e4c63bda6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-21mb/starlabs/lite/glkr: Disconnect unused GPIO'sSean Rhodes
Disconnect GPIO's that are unused, or not connected. Also update comments that are vague or have errors. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1b071ec1d194f76ee78066396bac8dfff5ec851b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64651 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-21mb/google/brya: Add `ext_pm_support` for taeko eMMC SKUSubrata Banik
This patch ensures google/taeko eMMC SKU has advanced PM support enabled. BUG=b:235915257 TEST=Able to boot to eMMC SKU to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6b14130e47c3e3ec9b066456f3195841c83623a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65243 Reviewed-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-21mb/google/brya: Add `ext_pm_support` for taniks eMMC SKUSubrata Banik
This patch ensures google/taniks eMMC SKU has advanced PM support enabled. BUG=b:235915257 TEST=Able to boot to eMMC SKU to ChromeOS. Change-Id: I20c98006b6a45e2c8286480c560c8dbc0752327c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65213 Reviewed-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-21mb/google/nissa: Create pujjo variantStanley Wu
Create the pujjo variant of the nissa reference board by copying the template files to a new directory named for the variant. (Follow other ADLN variant to generate by manual) BUG=b:235182560 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PUJJO Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I73ec985bc19320260d0c3132c1ca23a3648df9e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-06-20mb/purism/librem_cnl: convert to using overridetreesMatt DeVillier
Convert the librem_14 and librem_mini from using separate devicetrees to using a baseboard devicetree and overridetrees. This reduces code duplication, and facilitates adding any new variants with minimal additional code. Test: build/boot Librem 14 and Librem Mini v2 boards Change-Id: Ide65ffc750495c9ba2074757ce467efa2f384c56 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20soc/intel/apollolake: Hook Up SataPortEnable to devicetreeSean Rhodes
Hook Up SataPortsEnable to the devicetree. As the default value is 0, set both [0] and [1] in all mainboards so they aren't affected. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ica8cf9484a6e6fe4362eabb8a9a59fcaf97c1bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64524 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-20mb/starlabs/labtop: Configure tcc_offset based on power_profile settingsSean Rhodes
Set tcc_offset value based on the power_profile value, ranging from 10 to 20 degrees. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I66fb266c1730833ff6e2dbf8ea39f23ee0878590 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/google/brya/variants/nereid: enable CNVi bluetooth in overridetreeJesper Lin
When using CNVi WLAN on ADL-N, the internal USB2 port 10 is used for bluetooth. So update the nereid overridetree to enable port 10. BUG=b:236162084 TEST=USE="project_nereid emerge-nissa coreboot" and verify it builds without error. Signed-off-by: Jesper Lin <jesper_lin@wistron.corp-partner.google.com> Change-Id: Ic45301b863383e447b2dd3e06811b469cc247229 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65188 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-20mb/starlabs/lite/glk: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. This change also corrects the daughterboard USB 3.0 port number. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib6a934a1e5e65fe387c63b78cbe80e45e97e0a8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64796 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-20mb/starlabs/lite/glkr: Correct the daughterboard USB 3.0 port numberSean Rhodes
The daughterboard USB 3.0 was set to port 3, which is incorrect. This patch corrects that to port 4. This fixes an issue where USB 3.0 devices are not detected when plugged in to this port. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I50f86dee1b512d0dd20d07e3ee17ebfa5e537bc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glkr: Correct USB port numbersSean Rhodes
The USB ports for the Motherboard USB 3.0 and Type-C were labelled incorrectly. This change swaps the ports, so they are labelled correctly and also corrects the over-current pins that they use. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I80484dc8bdd68dd72b3848720c790d59237a9f8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glkr: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2a7f50ca2b2001e83211e8eba56bfa929ecdfd74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite: Enable enhanced C-statesSean Rhodes
Tested on the StarLite Mk III & Mk IV with Zorin 16.2 Core. This resulted in a reduction in power consumption of approximately 3%. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I7b5f4e01bc786db02184b722c74fda7d0ca055be Reviewed-on: https://review.coreboot.org/c/coreboot/+/64709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20soc/intel/apollolake: Hook up UfsEnabled to devicetreeSean Rhodes
Hook up FSP S UfsEnabled UPD (1d.0) to devicetree. UFS only exist on GLK, and has been there since its initial releases. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1976bfd340c728c64aaf36d296ac41dcd47bfc61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite: Configure MMIO window for ECSean Rhodes
The Nuvoton EC requires a window to be opened for updates, so open this window only if the Nuvoton EC is present. Change-Id: Iaa45aa58749c4d0bfc77e60b52eab2bcb270f3ee Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/labtop/kbl: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib5fec81a7a04f2f5ab13784435944601902904d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/labtop/cml: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie9bc6b3e20dddeb14cea195ef9a719432f66c6e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glk: Configure LPC IO registersSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I47523fae8d1cb0fbb972a82c43a992c9fb606ed4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glkr: Configure LPC IO registersSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2d949af0086c231e27ac889c0aabd0d3e00c94fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/64984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/google/brya/var/skolas4es: Add new memory partsNick Vaccaro
Add support for the MT53E2G32D4NQ-046 WT:C and MT53E512M32D1NP-046 WT:B memory parts to skolas4es. BUG=b:236284219 BRANCH=firmware-brya-14505.B TEST=None Change-Id: I5e3534985e12535ccc4285a0d829bca04781cf1b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65179 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-06-18mb/google/dedede/var/shotzo: Add EC defines for ACPITony Huang
Update Shotzo own ec.h with the battery, lid and ps2 defines stripped. This is to ensure the correct ASL is generated so that we don't advertise PS2 keyboard support and battery/lid interrupts which don't exist. In MAINBOARD_EC_SCI_EVENTS drop following events. EC_HOST_EVENT_LID_OPEN EC_HOST_EVENT_LID_CLOSED EC_HOST_EVENT_BATTERY_LOW EC_HOST_EVENT_BATTERY_CRITICAL EC_HOST_EVENT_BATTERY EC_HOST_EVENT_BATTERY_STATUS set MAINBOARD_EC_SMI_EVENTS to 0 and drop EC_HOST_EVENT_LID_CLOSED smi event. In MAINBOARD_EC_S5_WAKE_EVENTS drop below event. EC_HOST_EVENT_LID_OPEN In MAINBOARD_EC_S3_WAKE_EVENTS drop following events. EC_HOST_EVENT_AC_CONNECTED EC_HOST_EVENT_AC_DISCONNECTED EC_HOST_EVENT_KEY_PRESSED EC_HOST_EVENT_KEY_PRESSED BUG=b:235303242 BRANCH=dedede TEST=Build Change-Id: I5717e2e8ca7549d160fe46ccde31c6d7cf9649d7 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65167 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-18mb/google/brya/var/agah: Remove variant_finalizeTim Wawrzynczak
The EEs and I misunderstood, and apparently the vfio-pci kernel driver will turn off the dGPU when it sees it is unused, so coreboot should leave the dGPU on so the kernel driver can save state before it shuts it down. TEST=Tested by ODM Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I30b5dead7a5302f3385ddcaecfbf134c3bb68779 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65181 Reviewed-by: Robert Zieba <robertzieba@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-06-17mb/google/brya/var/banshee: Update thermal settings PL1 and PL2Frank Wu
Update PL1 and PL2 based on the suggestion of the thermal team. Then the settings are both updated in firmware log. BUG=b:233703656, b:233703655 BRANCH=firmware-brya-14505.B TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ibb81a1a8519b88ed4774385d9ccf895d64bbdc21 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-06-17mb/google/nissa: Create joxer variantMark Hsieh
Create the joxer variant of the nissa reference board by copying the template files to a new directory named for the variant. BUG=b:236086879 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_JOXER Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I4cb74f90c4ec33818b551d5f51759930e3222677 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
2022-06-17mb/google/nissa/var/pujjo: Generate SPD ID for supported memory partLeo Chou
Add pujjo supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K3LKBKB0BM-MGCP, K3LKCKC0BM-MGCP 2. Hynix H58G56AK6BX069, H9JCNNNBK3MLYR-N6E 3. Micron MT62F512M32D2DR-031 WT:B BUG=b:235765890 TEST=Use part_id_gen to generate related settings Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I929527a219452082e416803f7a74d470be5a188c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65100 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-17mb/google/brya/var/agah: Remove stop pin declaration for LANTony Huang
Currently, the system fails to enter S0ix as the stop pin declation for LAN device will prevent system from entering suspend. So remove the stop pin declaration. Also add device_index=0 for the first NIC to get correct MAC from VPD setting. BUG=b:210970640 TEST=Build and suspend_stress_test -c 20 pass Check LAN works fine after resume Change-Id: I513bf8b4bcb4d6db2eed2790fef7f6000a441274 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65123 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-17mb/supermicro/x9sae: Correct mapping of HDMI portsBill XIE
The two HDMI ports on x9sae(-v) prove to be wired to HDMI2 and HDMI3. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I07870fd70612c9ed01a833f173b18053807ad2b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-06-17mb/google/nissa/var/craask: Enable Elan touchscreenTyler Wang
Add Elan touchscreen support for craaskvin. BUG=b:235919755 TEST=Build and test on MB, touchscreen function works. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I18e0be688705942647c42ee532fcd32e862fe78c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-06-17mb/google/nissa/var/craask: Add ALC5682I-VS codec supportTyler Wang
Add ALC5682I-VS related settings. And add codec/amplifier space in fw_config. BUG=b:229048361, b:235436515 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I567d3567318c810e19ae9e9ba5e0dc8332517866 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-06-17mb/google/nissa/var/craask: Disable SD card based on fw_configTyler Wang
Use fw_config Bit 5 to control whether to disable SD card: Bit 5 = 0 --> enable SD card Bit 5 = 1 --> disable SD card BUG=b:229048361 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ib5e92600564e2138e32a0d2e60259b9767516a4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65129 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-17mb/google/brya/var/banshee: Update gpio configurationFrank Wu
Update gpio configuration based on GPIO_0610b.xlsx. BUG=b:226182106, b:226182090 BRANCH=firmware-brya-14505.B TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I2b447629645690e5e97a17fff25860838f4f3344 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2022-06-16mb/google/peach_pit: Select BOOT_DEVICE_NOT_SPI_FLASHYu-Ping Wu
CPU_SAMSUNG_EXYNOS5420 has its own boot device implementation (src/soc/samsung/exynos5420/alternate_cbfs.c), so BOOT_DEVICE_NOT_SPI_FLASH should be selected. Change-Id: I0a9f96ad68b28773ede4e99510bd33867789e185 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65109 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-16mb/google/brya/vell: Implement variant_devtree_update() for audioeddylu@ami.corp-partner.google.com
Different board versions have different audio layouts, therefore support both layouts by enabling only the appropriate devices in the devicetree via board_id(). BUG=b:207333035 BRANCH=none TEST='FW_NAME=vell emerge-brya coreboot' Change-Id: If053b8f85933f8fc75589ae175e225cc9c1e3991 Signed-off-by: Eddy Lu <eddylu@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65124 Reviewed-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-16mb/intel/adlrvp: Add 5G WWAN ACPI support for ADL-P RVPCliff Huang
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM features from RTD3. PCIe root port: 6 (1 based) clock source & request: 5 (0 based) GPIOs: WWAN_PERST_N: GPPC_C5 WWAN_RST_N: GPPC_F14 WWAN_FCP_OFF_N: GPPC_F15 WWAN_WAKE_N: GPPC_D18 WWAN_PWREN: GPPC_F21 WWAN_DISABLE_N: GPPC_D15 CLKREQ5_WWAN_N: GPPC_H23 TEST=Check SSDT table to see if the PXSX device and PowerResource RTD3 are generated under the root port. BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I10902245e3a5e05cd2af9030394933e936c25396 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63941 Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-06-15mb/google/brya/var/crota: Enable VNN_1.05v_bypass railTerry Chen
Some SKUs of crota have VNN 1.05v bypass rails for additional power savings in S0ix states. This patch uses FW_CONFIG to enable that feature when run on the applicable SKUs. BUG=b:233175019 BRANCH=none TEST=emerge-brya coreboot and verified pass Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Iaade50f4fe821b7114b3e2d44bda0747816da11c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Cyan Yang <cyan.yang@intel.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-15mb/google/brya/var/brya4es: Enable CNVi ddr rfimVarshit B Pandya
enable_cnvi_ddr_rfim enables DDR RFI mitigation feature, this feature needs to be enabled for all brya variants. Currently, it's not enabled for brya4es. BUG=b:201724512 TEST=Build, boot brya4es and check function 3 in _DSM method under \_SB.PCI0.WFA3 Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I6cc9d3e4721188dcbc8584596c9f3f89a737206f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65110 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-15mb/google/nissa: Increase I2C bus frequency to around 390 kHzReka Norman
- Set the speed to I2C_SPEED_FAST in each speed_config so that the speed_config is actually applied. Currently, the speed_config isn't applied, so the hcnt/lcnt calculation falls back to rise_time_ns and fall_time_ns, which are 0 since they're not set. This results in frequencies around 300 kHz. - Move the data hold time to the speed_config, ensuring that the resulting sda_hold value remains the same. - For nivviks and nereid, tune scl_lcnt and scl_hcnt for each bus to give a frequency around 390 kHz. - In the baseboard, keep default scl_lcnt and scl_hcnt values. These work well for buses with a rise time around 100 ns, and can be used as a starting point before tuning them for a specific variant. BUG=b:229547183 TEST=Measure the clock frequency, tHIGH, tLOW and tVD;DAT on nivviks and nereid and check they meet the spec. nereid clock frequencies: I2C0 - 387.9 kHz I2C1 - 392.7 kHz I2C3 - 386.3 kHz I2C5 - 383.6 kHz nivviks clock frequencies: I2C0 - 387.67 kHz I2C1 - 380.47 kHz I2C2 - 388.51 kHz I2C3 - 384.03 kHz I2C5 - 389.09 kHz Change-Id: I88a6cfcc893183385eb85a89489e5d270277e537 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64942 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-15mb/google/dedede/var/shotzo: Generate SPD ID for supported partsTony Huang
Add supported memory parts in the mem_list_variant.txt and generate the SPD ID for the parts. The memory parts being added are: - MT53E512M32D2NP-046 WT:E - H9HCNNNBKMMLXR-NEE - K4U6E3S4AA-MGCR - MT53E512M32D1NP-046 WT:B - H54G46CYRBX267 - K4U6E3S4AB-MGCL - K4U6E3S4AA-MGCL BUG=b:235303242 BRANCH=dedede TEST=build Change-Id: Ie0ffdfed47b1791b990affd9eee262faede4b0c8 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65081 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com>
2022-06-15mb/prodrive/hermes: Add BIOS menu control via EEPROMLean Sheng Tan
Introduce a new field in the board settings EEPROM region to control whether BIOS menu is to be enabled. This field will be used in EDK2 payload. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I0af81c9e70a0088caea6bc7e2b81eab9a123c0f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2022-06-14mb/google/brya/var/agah: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ A2 | | A0 C2 | | C0 | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: I8cc7be20988ff3cc3be1fac3c9b143059ff9190c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65088 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-14mb/google/brask/variants/moli: change clk_src and clk_req for LAN_I225VRaihow Shi
change clk_src and clk_req to 4 for LAN_I225V based on ADL_Moli_SC_MB_20220601.pdf. BUG=b:235768639 TEST=emerge-brask coreboot and check LAN_I225V can connect. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I323726df84d07703402da9da44b1882a0cdc1e33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65105 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-14mb/google/brask/variants/moli: Remove the cnvi_bt_audio_offloadRaihow Shi
Remove the cnvi_bt_audio_offload because it is already probed in variant.c for moli. BUG=b:235426221 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I15077ca161b6283e764105d1c2fbc59ead1fd761 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-14mb/google/brask/variants/moli: enable use_custom_pldRaihow Shi
enable use_custom_pld to match the custom physical location define. BUG=b:235426221 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I62d133eed02faf4e5ad054a0901f73b1196c4c6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Won Chung <wonchung@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-14mb/hp/snb_ivb_laptops/Kconfig: move common option to commons sectionPeter Lemenkov
Apparently all nine HP Sandy/Ivy laptop variants select MAINBOARD_USES_IFD_GBE_REGION. So let's move it to the COMMON section. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Change-Id: I48e0d03c59d3ba013b479b59df8a15a0f8d23c50 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-06-14mb/intel/adlrvp: Add new upd setting for ADL RVP with Raptor LakeBora Guvendik
Currently, ADL FSP headers and RPL FSP headers differ. Set a RPL only upd for adlrvp with Raptor Lake silicon. This code can be removed once ADL and RPL start using the same FSP. BUG=b:229134437 BRANCH=firmware-brya-14505.B TEST=build adlrvp_rpl_ext_ec Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I4e69323949233aa8c325a757b28b9d80cbdf4322 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-14mb/amd/chausie/Kconfig: enable PCIe power managementFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia24a502994d24f3341273c5e6f768687ad20baf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65113 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-14mb/amd/chausie/devicetree: add PCIe clock output configurationFelix Held
The general purpose PCIe clock outputs 0, 1 and 3 are used with their corresponding clock request pins, so set the gpp_clk_config to GPP_CLK_REQ for those and disable the unused output 2. This matches the DXIO descriptor in port_descriptors.c. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I38ab8d6d824617509fdd18f06d5593889ec50666 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65112 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-13mb/google/volteer: Fix wrong Type-C port for retimerDerek Huang
This change fixes wrong type-C port number for voxel. Voxel uses tcss_usb3_port1 not tcss_usb3_port3. BUG=b:231344977 BRANCH=volteer TEST=Check the transactions are happening on correct port. Also checked retimer firmware update on both the ports. Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Iba7b3b15296bed99d3626a6d53dfd59e8d20fe5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/64022 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-13mb/google/dedede/beadrix: Update SoC gpio pin of I2C cameraTeddy Shih
Update SoC GPIO setting of unused I2C camera pins according to beadrix schematics. GPP_H6 : NF1 -> NC (AP_I2C_CAM_SDA) GPP_H7 : NF1 -> NC (AP_I2C_CAM_SCL) BRANCH=dedede BUG=b:235005592 TEST=on beadrix, validated by beadrix's camera still working properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: I8be57406a44096c764c1faa8f45267d08c4694fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/64971 Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-12mb/google/dedede/beadrix: Update probe daughter LTE mainboard SARTeddy Shih
Update FW_CONFIG probe for daughter board LTE and mainboard SAR according to beadrix schematics. BRANCH=dedede BUG=b:226910787, b:213549229, b:233983127 TEST=on beadrix, validated by beadrix LTE working properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: I126a1c548b6314acc0749fcfbdffd8f482c4f46c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-12mb/amd/chausie,google/skyrim: increase RW_MRC_CACHE size to 120 kByteFelix Held
The APOB data in DRAM is larger than the 96 kBytes of RW_MRC_CACHE, so it won't fit in the flash and makes soc_update_apob_cache return early before writing the APOB data from DRAM into the flash with this warning: [WARN ] RAM APOB data is too large 1db18 > 18000 Increasing the RW_MRC_CACHE size to 120 kByte fixes this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I763d20f504d4f5b7cea68f21f409de9a1035f440 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64555 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-12mb/google/corsola: Fix PS8640 power-on T6 sequenceRuihai Zhou
The T6 of PS8640 power on sequence should be larger than 0ms, but it's -0.062ms now. Add 100us delay between VRF12 and VCN33. The PS8640 power-on sequence is described in the "PS8640_DS_V1.4_20200210.docx". BUG=b:235448279 BRANCH=None TEST=The sequence T6 is larger than 0ms when power on. Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: I0b8a37d6119dc027a9d1c0a62c087b0a7ef14cac Reviewed-on: https://review.coreboot.org/c/coreboot/+/65084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-06-10mb/google/brya/variants/felwinter: Enable TBT PCIe Root Port 0John Su
The TBT device can't be recognized after we re-plug it at DB type-c port. Intel found that tbt_pcie_rp0 has mapping error after each re-plug. From Intel suggestion, we enable TBT PCIe RP0 to fix this problem and take this as short term solution. Intel will implement re-mapping mechanism in ACPI for long term solution. BUG=b:230141802 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I61429033dfe64d67916167bb901bdd8246db953e Reviewed-on: https://review.coreboot.org/c/coreboot/+/65019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-06-10mb/intel/adlrvp: Add 5G WWAN ACPI support for adlrvp_rpl_ext_ecCliff Huang
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM features from RTD3. TEST=Check SSDT table to see if the PXSX device and PowerResource RTD3 are generated under the root port. BRANCH=firmware-brya-14505.B Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com> Change-Id: I74434d833086f639927d8369f8a6e3af31dd99e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64648 Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-10mb/google/brya: Select SOC_INTEL_RAPTORLAKE for skolas variantsBora Guvendik
BUG=b:229134437 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib0531ff736ed7ac52bff8607b26b3e7f1d3ac3ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/65053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-10mb/intel/adlrvp: Select SOC_INTEL_RAPTORLAKE adlrvp_rpl_ext_ec variantBora Guvendik
BUG=b:229134437 BRANCH=firmware-brya-14505.B TEST=build adlrvp_rpl_ext_ec Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I12eab0fe2a3c21011f50c72718514fbc90cbe658 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-06-10mb/chausie/ec: Set MS bit in SW02Fred Reitberger
Set the MS bit in EC SW02 register to enable s0i3 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I97b6adf48b49635251c70015f1d87fd8ca11d539 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-06-10mb/google/brask/variants/moli: correct ddi_ports_configRaihow Shi
1. enable DDI_PORT_1, DDI_PORT_3 hot plug detection to let tcp0 and tcp2 can display 2. remove DDI_ENABLE_DDC for Port 2, because tcp-dp dosen't need to enable DDC BUG=b:234521799 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I1354b82d881ebd838c310b32ae28ac2628ab8c9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 02:46:00 +0000