| Age | Commit message (Collapse) | Author |
|---|
|
This reverts commit 2e6fa8206e0a3bdd2e53542b6377fe2b37e3f26e.
Reason for revert: causing `redefinition` issue.
src/mainboard/google/poppy/variants/nami/gpio.c:527:26: error: redefinition of 'variant_romstage_gpio_table'
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
src/mainboard/google/poppy/variants/nami/gpio.c:426:26: note: previous definition is here
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
Change-Id: I107cce8bf3a5bf38edb39b9d46512ee0d467d354
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73210
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the
port.
BUG=b:269690930
TEST=kernel can detect a PL2303 USB device
BRANCH=dedede
Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Add functionality such that the FPMCU is power cycled long enough
on boot to ensure proper reset.
This solution relies solely on coreboot to sequence the power and reset
signals appropriately (150ms on boot).
BUG=b:245954151
TEST=Confirmed FPMCU is still functional on Nami.
Confirmed power is off for 150ms seconds on boot.
Confirmed RCC_CSR of FPMCU indicates power cycle occurred.
Confirmed reset is de-asserted approx 3ms after power application
(target >2.5ms)
Change-Id: I21eb85dc11e0ea0eb5de8a6092b01663d3c3df91
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68820
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Based on product spec v1.4, update T3 timing from 180 ms to 150 ms.
BRANCH=none
BUG=b:262734395
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0d8f1e008276fccdfbb8c76cfebaccbe71160b64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73130
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Package C state demotion is now disabled for all RPL SoCs from within
soc/intel/alderlake/fsp_params, so no need to duplicate that in the
skolas devicetree.cb.
BUG=268296760
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Select NO_S0IX_SUPPORT for `starlabs/starbook` and `atlas/prodrive`
so their configurations are unchanged.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I718952165daa6471f11e8025e745fe7c249d3b46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72800
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I99ded00fa6dadb494c1523d00063dbc1fde95614
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73093
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To make MIPI/eDP panel functional on unprovisioned devices, it requires
passing SKU ID and panel ID info to the payload(depthcharge) to load the
corresponded device tree for kernel.
BUG=b:247415660
TEST=cbmem -1 |grep "SKU Code".
Change-Id: Id2254729b7bd621d1e9bc520e8f40916d0f81030
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73076
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The platform supports a discrete LPC TPM module. However, ME firmware
enables PTT by default and descriptor is configured for SPI TPM on the
platform's original firmware. So disabling PTT in ME is not enough,
because it falls back to SPI TPM. Ensure PTT is disabled in ME and SPI
TPM is disabled in descriptor soft straps.
TEST=Boot VP4650 and see LPC TPM is recognized by coreboot.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3764e085f2eb5ae957b9087d150320def7af4fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If1b4f9c8245a082ff875ae9c6102a1c45e677d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Based on product spec v1.4, update T3 timing to 150 ms from 300 ms
BRANCH=none
BUG=b:269041202
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Change-Id: Ie5bd4bc2c8be2e43470edd374af0623162067497
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Change-Id: I87e383ce2f28340dbc3c843dbf2ed0e47c00a723
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I3a846d8e4b70ccb3e6fde448c00376cd0088716c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I0cbdcd5a787d99e2579a312a51c63d7fc4120462
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I58a4e4fbd1a43462147daa58a5fda767cfd59c06
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ib968fe7f9f95e8f690b46b868fd7d6f9332b4c9a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72664
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I150a4ed94bcaead6eb45f1c4b4952ae6957e0940
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I7db69e2faf412b9c6732f6dfc362d5774094ef27
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I5eb1424e9e6c1fbf20cd0bf68fbb52e1ec97f905
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I4035fabd46b1ba7fa5463abb7f780aeccd6a96e0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Enable HDA device and update jack codec HID from ALC5682I-VD to
ALC5682I-VS.
BUG=b:268309238
TEST=kernel detects audio DSP and rt5682s
BRANCH=dedede
Change-Id: Icd17d5009ab8ef4711bb6c5fa414a8188fc0912f
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:265611305
TEST=Reboot test 2500 times pass
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: I2b114cac58a7fadeaee6d48996cb8b51f192e78f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
According to the author of the mainboard scaleway/tagada, the mainboard
is not used anymore. Since the mainboard is not publicly available for
purchase and not used anywhere else, the usual deprecation process
of 6 months is not needed.
Thus, to reduce the maintenance overhead for the community, support for
the following components will be removed from the master branch and will
be maintained on the release 4.19 branch. Also, add a note to the 4.20
release notes.
* Mainboard Scaleway Tagada
Change-Id: Ifb83b8f2b1dc40cbef657e52c629948dc466ec6e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72915
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new baseboard for hades, an Intel RPL based reference design.
Also, add variants for the reference boards hades. This commit is
a stub which only adds the minimum code needed for a successful build.
Need update gpio and memory DQ pins after final shchematic comes out.
BUG=b:269371363
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib7fbdf997df8225cc7814a34f8b4e4e04884dbf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
BUG=b:269059211
BRANCH=none
TEST=emerge-gralt coreboot
Change-Id: Ia2ec6db332939f1ac629cda9a0784a12c92d91da
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73056
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
Fix RTD3 timing for adlrvp_p_ext_ec and adlrvp_rpl_ext_ec.
BUG=none
BRANCH=firmware-brya-14505.B
TEST=Insert a SD card or NIC AIC on PCIe slot1 and run
'suspend_stress_test -c 1'. The RP8 should not cause suspend issue.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I792c55a6361d1eae55cc6f668a03dc2503120fe1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72422
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the flash size is over 16M, the absolute address could be lager
than 16M, which can not be taken by CBFS. For the relative address, it
is more flexible.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
TEST=binary identical test on birman and mayan when
CONFIG_BIRMAN_HAVE_MCHP_FW and CONFIG_MAYAN_HAVE_MCHP_FW are set as
y.
Change-Id: I65be3039cd3449bfb481ad87281b72e88a58bd45
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Select DEBUG_SMI and RUNTIME_CONFIGURABLE_SMM_LOGLEVEL.
Tested=On OCP Delta Lake, SMM log level can be changed via VPD variable.
Change-Id: I73afc944fbd6c21e884397f3049bd363e2c1ce2c
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47006
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid
prompting wrong dmesg as below.
```
usb usb2-port3: Cannot enable. Maybe the USB cable is bad?
```
Mainboard variants to override the USB ports as per the target
board design.
TEST=Able to build and boot google/rex with all USB ports are
working as expected.
Change-Id: Ic3d21151a22f2318413f480f3386bf2dbf696307
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Initial Aurash configuration base on moli design.
1. Set up gpio.
2. Add memory config.
3. There is no SD card setting on aurash, remove it from overridetree.
4. Follow moli psys schematic design.
5. Enable BT offload.
BUG=b:269063331
TEST=emerge-brask coreboot.
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Change-Id: Ia9088cc2937bab72c8c22af592392384a10616a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
|
|
Change-Id: Iab21376d1887b0c79ea463885520781d042b040d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1) Samsung K3KL8L80CM-MGCT
2) Hynix H58G56BK7BX068
3) Micron MT62F1G32D2DS-026 WT:B
4) Micron MT62F512M32D2DR-031 WT:B
5) Hynix H58G56BK8BX068
BUG=b:264340545
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I1f650c7e90804e871572f42ac925da85afd7f9d3
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72886
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyle Lin <kylelinck@google.com>
|
|
Add support for MTL-P RVP mipi camera functionality
BUG=None
TEST=Build and boot MTL-P RVP to Chrome OS. Verify SSDT entries
related to mipi camera and verify camera working.
Scope (\_SB.PCI0.I2C1)
{
Device (CAM0)
Scope (\_SB.PCI0.I2C0)
{
Device (CAM1)
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I698edd7155fc38477f3416900799e61d3295fd1a
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
|
|
This patch adds FW_CONFIG and codec support for MTL-P RVP
BUG=None
TEST=Build and boot MTL-P RVP to Chrome OS. Verify audio codec listed
under aplay -l and audio working with the connected audio card.
localhost ~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofrt5682 [sof-rt5682], device 0: Headset (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 1: Speakers (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 5: HDMI1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 6: HDMI2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 7: HDMI3 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 8: HDMI4 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Ib29ac3e4105e578e1555076d180b35a8265a99c8
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Built asrock/b75pro3-m with BUILD_TIMELESS=1 and coreboot.rom remains
the same.
Change-Id: I8db6b870f2d4aac35766717866b519921d270f9e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Use the common missing APCB warning when the APCB is missing
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie6303bc3457731bcac322770c4c08712f89fce3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move missing APCB warning from birman to amd/common so that other
mainboards can utilize the same warnings if the APCB is missing.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7ae689726ae4f7ccdf6959e47cbb5aee15cdb690
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Configure GPIOs according to schematics
TEST=emerge-brask coreboot
Change-Id: Ib27f1c334cad47b3be57f57b7cc8ca5530118328
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72945
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust timing parameters on i2c1 and i2c2 to meet timing requirements.
For SCL, the t-high time is now over the min 600ns requirement
for 400KHz operation (measure at over 700ns). Also, this change
does not violate other parameters - rise time, setup time and hold time.
BUG=b:264704732
TEST=Verified all timings meet spec now
Change-Id: I0e92b2c9c25e7fb5fa7082af3f4a88da168c3ef2
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The NVPCF DSM subfunction specified a incorrect checksum.
Update this function to the proper checksum of 0xaf.
BUG=b:214581372
TEST=build
Change-Id: Ib58bd6cc10703ca67a7a4f520273865a95a4702b
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch enables S0ix for MTL-P RVP platform
BUG=None
TEST=Able to enter low power idle S0 on MTL-P RVP
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: Id84f21d81197e44d6dd0dd8888c80848aa3679e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71994
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
This reverts commit e30695dbe196ea42864ad03af799706eaae11f02.
for meet thermal criteria, modify PS1/PS2 cutoff to default value
BUG=b:229803757
BRANCH=brya
TEST='FW_NAME=vell emerge-brya coreboot'
Change-Id: Ie009788116f1e25db8aed2df58102a316a8aeef2
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72833
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add TPM I2C for aurash to avoid TPM I2C fail.
BUG=b:269050049
TEST=emerge-brask coreboot.
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Change-Id: I1947d2e1189f46d8dab01837f75de7cb6e9e0579
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Create the whiterun variant of the skyrim reference board by
copying the winterhold files to a new directory named for the variant.
BUG=b:265955979
BRANCH=None
TEST=emerge-skyrim coreboot and boot up on Whiterun
Change-Id: I3539f84e79c05936fe006bfe9d08743d6a9a6ba7
Signed-off-by: Isaac Lee <isaaclee@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72483
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a FMAP region to support caching GOP-driver-modified VBIOS tables.
Select SOC_AMD_GFX_CACHE_VBIOS_IN_FMAP if CHROMEOS && RUN_FSP_GOP.
Default USE_SELECTIVE_GOP_INIT to y if CHROMEOS && RUN_FSP_GOP.
BUG=b:255812886
TEST=build/boot skyrim, verify cached VBIOS data differs from VBIOS
in CBFS, cached VBIOS data is used when not booting in recovery
or developer modes.
Change-Id: I5857fa4a15250bf6478bffa96b16200e318492b1
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Commit 45b1da33c80a ("mb/google/hatch: split up hatch and puff
baseboards") moved puff out from under hatch into its own
mainboard dir, but this basebaord include was left behind.
Delete it as it's not needed.
TEST=build hatch variants
Change-Id: I9045c52006fd232552541d68972d831c8b52da27
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch overrides `SkipExtGfxScan` UPD as the Rex device is
equipped with an on-board graphics device hence, skip scanning
external GFX devices.
BUG=b:228002764
TEST=Able to save ~1ms+ boot time on google/rex.
FSP FPDT Data is showing the timestamp between those function calls.
Without this patch:
[INFO ] CheckOffboardPcieVga/5b7cc220-e183-481c-87f427a92d8db88f -> 979684 -> 22
[INFO ] CheckOffboardPcieVga/5b7cc220-e183-481c-87f427a92d8db88f -> 980815 -> 1131
With this patch:
`CheckOffboardPcieVga` is not getting called.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I20aa09e80671ab94e639787f40b95b740bbe5efb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Follow thermal table to modify setting.
"stapm_time_constant_s" = "200" to "275"
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7fe05fe1c17258a3323b8d04302212e76a388797
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Change-Id: Ifbc1814fbc123752bdc96f1f72344ed0333fae2e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
eMMC RST pin could reply on PLT_RST so we could keep GPP B3 in VIH.
BUG=b:263548436
TEST=emerge-brask coreboot
Change-Id: Iffbc9dc932325cdd2176b36795a2ff1b3690fbf8
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72941
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
eMMC RST pin could reply on PLT_RST so we could keep GPP B3 in VIH.
BUG=b:263548436
TEST=emerge-brask coreboot
Change-Id: I610d53059e86945693bc5b3d7e43462e53640564
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72940
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
APOB on Phoenix is larger, so expand the reserved DRAM and MRC_CACHE
regions to fit. This requires moving memory addresses around to prevent
overlapping memory linker errors.
TEST='./util/scripts/testsoc -K PHOENIX -K GLINDA' successfully builds
all boards
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I42af7230ca5f09ba66b2b3c4f99ac3feac7feeea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Glinda and Phoenix have different requirements, so split the birman FMD
files to better apply to each SoC.
TEST='./util/scripts/testsoc -K PHOENIX -K GLINDA' successfully builds
all boards
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia2dbaeb8af04fb1d1224c397d728929c50800dfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The EFS must be located at the 128K offset. The combination of EC,
MRC_CACHE, and FMAP push the start of the coreboot CBFS region to 128K,
leaving no room for the CBFS headers for the EFS.
Move the MRC_CACHE region to the end of the image. This matches the
chromeos MRC_CACHE layout.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3919fba40f22ee84b0a3eee1ac7b6e48c076d713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The EFS must be located at the 128K offset. The combination of EC,
MRC_CACHE, and FMAP push the start of the coreboot CBFS region to 128K,
leaving no room for the CBFS headers for the EFS.
Move the MRC_CACHE region to the end of the image. This matches the
chromeos MRC_CACHE layout.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I15e29443d2735342a5a43339f5bb095e5115349c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
2/5
of split changes of https://review.coreboot.org/c/coreboot/+/58552/28
Change-Id: I18f73462a3995038fe93750320dfc053fec969ba
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add Raptor Lake (RPL) 28W dptf settings for Brya0
BUG=b:235311241
BRANCH=firmware-brya-14505.B
TEST=Built and tested on brya
Change-Id: I5d06c1ace5b481012ea39f2a57570eb6330479cb
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Add Raptor Lake (RPL) 28W dptf settings for Skolas
BUG=b:235311241
BRANCH=firmware-brya-14505.B
TEST=Built and tested on skolas
Change-Id: I4364ca6a50906c2a6dd0e754238264c680e7ebd0
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update Power Limit1 (PL1) minimum value to 15W based on the Brya
design.
BRANCH=firmware-brya-14505.B
BUG=b:235311241
TEST=Built and tested on Brya system
Change-Id: Ifd5256221b82eae2cfe8009918f8ff4791751b4d
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72868
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update Power Limit1 (PL1) minimum value to 15W based on the skolas
design.
BRANCH=firmware-brya-14505.B
BUG=b:235311241
TEST=Built and tested on Skolas system
Change-Id: I1027ca2bf2323ac959474ee6c38e47fa530113da
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72727
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update dptf thermal settings as per suggested by thermal team.
Control fan based on TSR sensors, not based on CPU sensor temperature
which changes too fast.
BRANCH=firmware-brya-14505.B
BUG=b:235311241, b:261749371
TEST=Built and tested on Brya system
Change-Id: I58bc7132086b0776ee191a242bd1302554f3854f
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72867
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
Update dptf thermal settings as per suggested by thermal team.
Control fan based on TSR sensors, not based on CPU sensor temperature
which changes too fast. This change is based on the discussion on
bug:235311241 comment#7.
BRANCH=firmware-brya-14505.B
BUG=b:235311241, b:261749371
TEST=Built and tested on Skolas system
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Ibeddce61b0d73d82a85f486e7cb5cbfa9568953c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71692
Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
The keyboard reset is not being used on this board, so disable the
functionality.
BUG=None
TEST=Check register values
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I4a9f8f254dfefcb32a77f558f984bcdd6004d34b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72913
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable DPTF functionality for Meteor Lake based mtlrvp board
BRANCH=None
BUG=None
TEST=Built and booted on mtlrvp board
Change-Id: I8d3e1cd43cf67c3f2081be339589a6da358b668c
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Commit bf3c648fa7f6 ("soc/intel/skl; mb/google/eve,poppy: Update NHLT
methods") contained a copy/paste error for rammus, swapping the max98373
entry for the correct max98927 one. Change it back.
TEST=build/boot Windows on rammus, verify audio functional with
coolstar's AVS audio drivers.
Change-Id: Ibcd4b752e01866a3dd54997f1d2a6c079b07b7a3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit ae20d4c78f9f ("mb/google/volteer: Fix USB4 enabling for volteer
family") reworked the USB4/TBT config for volteer, but drobit variant
was missed for some reason. Add the missing USB4/TBT entries.
TEST=build/boot Windows on drobit, verify USB4/TBT functional.
Change-Id: I43d771eeaf29b4e141b222ccb05af5cb7ceedc6f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit 525c61f74e94 ("mb/google/hatch: Implement touchscreen power
sequencing") contained a copy/paste error; KOHAKU's enable GPIO is set
twice in ramstage, and the reset GPIO not at all, leading the
touchscreen to not be detected.
Correct the copy/paste error by replacing the 2nd instance of GPP_C12
with GPP_D15.
TEST=build/boot Windows/Linux on KOHAKU, verify touchscreen works.
Change-Id: I08d35f1e2a951cdaa463daa34df2134fdc8c65c8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Enables display backlight control under Windows.
VBT extracted from stock ChromeOS firmware Google_Drallion.12930.543.0.
TEST=build/boot Win11 on drallion, verify OS backlight control
available and functional.
Change-Id: I85065f22b825a7616fa4ac632c42ae7972091e24
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Under Win11, a longer delay after asserting reset is needed for the
Goodix touchscreen to init properly. Increase the reset delay to match
that used for the Goodix touchscreen by other volteer variants (120ms).
TEST=build/boot Win11, Linux on eldrid variant with Goodix touchscreen,
verify functional.
Change-Id: I489f037f0bbade9567aad2ad64404a5ac66965d9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Constitution will use SOLDERDOWN. Add memory.c to override baseboard.
Add mem_parts_used.txt and generate dram_id.generated.txt and
Makefile.inc
Memory:
SAMSUNG K4U6E3S4AB-MGCL
MICRON MT53E1G32D2NP-046 WT:B
BUG=b:267539938
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
Change-Id: Id879b2a7491f29e9fca903dcf3c022ec8ffffab4
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72775
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add EC_HOST_EVENT_USB_MUX to MAINBOARD_EC_S0IX_WAKE_EVENTS for
brask. Without it EC won't send host event to wake AP when USB
MUX is changed during S0ix. It's there for brya but missing
for brask.
BUG=b:267573651
TEST=emerge-brask coreboot
Signed-off-by: Derek Huang <derekhuang@google.com>
Change-Id: Id08d9aec9ab3566176369f2ca25cd00b9f0a0ca5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
This reverts commit 8e1bb93fb88bc9cc20aab33a1fe09fb4c0c652a0.
Reason: Enabling L.2 breaks some devices on this bridge. Reverting
until a workaround is found and additional testing is done.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I9f721178244e7764e9b08e419db8a8c05ecc29a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72916
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Hook up the `wake_on_usb` EEPROM setting so that it works as intended.
TEST=Keysmash on a USB keyboard, verify Hermes does not wake from S3.
Change-Id: I81531b90abae6a62754ea66c47e934e1f440bda2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72906
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GPIO 67 is not currently used on skyrim, so set it as no-connect.
Since it's now free for other purposes, make sure that the
SPI-ROM-SHARING functionality is disabled.
BUG=b:268330591
TEST=Examine registers after change
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id083baf41d25920eca09795453a01aac1d00d0f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=None
TEST=Verify that DMI type 3 - Chassis Information Type field has changed
from Desktop to Laptop
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I76c8970fe3fdc2ea322a07f114ad03a0373e152c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72907
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Move the missing APCB warning to the end of the build and make it stand
out better. Prior to this patch, the warning would appear as one of the
first build messages and easily be missed due to the rest of the build
messages.
TEST=build with and without proper APCBs being found, warning message
appears only when APCB is not found and stands out more
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Iabe32636b8e31fe781519533a329a08535bd661a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Mainboard name is Compal JBL00. This is based on the GM45/ICH9M chipset
and uses DDR2 RAM. The EC is a SMSC MEC5035 which has internal flash, so
there's no issue about making sure to include the EC firmware in the
BIOS region. This only supports the variant with integrated graphics
only, the version with a discrete Nvidia Quadro NVS 160M is not
supported.
This port was based on the Lenovo T400 port.
Working:
- USB EHCI debug (lower USB port on right side)
- Keyboard
- Touchpad/trackpoint
- VGA
- Displayport
- ExpressCard
- Audio
- Ethernet
- mPCIe WiFi
- mPCIe Bluetooth (uses USB)
Not working:
- Brightness hotkeys
- Physical Wireless switch
- SD card slot: Linux outputs an "irq 18: nobody cared" message when
inserting a card, after which it disables the IRQ
Unknown/untested:
- Dock
- Smartcard (slot and contactless)
- Firewire
- eSATA
- TPM
- Battery (my battery is at the end of its lifespan)
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Change-Id: I516ebbf4390a3f6d242050da8d35dc267b8b3a28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For Geralt, we use BOE_TV110C9M_LL0 as MIPI firmware display, so add the
power-on sequence for BOE_TV110C9M_LL0.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I3ef0b2e26d8cc0dc35c2985363ee4c3557dac8a9
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72749
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The regulator MT6359P is needed by both firmware display and SD card.
To avoid duplicate initialization in ramstage, publicize init_pmif_arb()
as mt6359p_init_pmif_arb() and call it from mainboard_init(). This would
save 13 ms for boot time on Geralt.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I29498d186ba5665ae20e84985174fc10f8d4accd
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72839
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Move eMMC init from depthcharge into coreboot to remove it from the
critical boot path. Doing so saves us almost 35ms on villager:
before change:
finished storage device initialization 50,783
after change:
finished storage device initialization 16,255
BUG=b:254092907,b:218406702
BRANCH=None
TEST=flash new FW onto villager and make sure can boot from eMMC
Change-Id: I1af1ec162029120332e7f531f75c3780266d322b
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Remove the commented VBOOT_VBNV_CMOS Kconfig option as well as VBOOT for
emeraldlake2.
BUG=b:235293589
TEST=none
Change-Id: Ie583dcf615573784c657b9d220ad417b05704150
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for z220_series.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
BUG=b:235293589
TEST=./util/abuild/abuild -t HP_Z220_CMT_WORKSTATION -a \
# with VBOOT enabled and a custom FMDFILE with RW_NVRAM region
Change-Id: I1c60a44fb12fd093f45cf54ef2f9e0e02afc80bd
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Config GPP_B9 as LAN_CLKREQ_ODL based on latest schematic
BUG=265021899
BRANCH=dedede
TEST=emerge-dedede coreboot
Change-Id: Ia099bd64364b46240e0426aa57dfe8d230e7494d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Liam Flaherty <liamflaherty@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add SoC config and .early_init = 1 in I2C1
BUG=b:263060849
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I661bdee6c7b9e6ea4cd0ab2006967d7c7ddd0f67
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72872
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
1. Add fw_config:STORAGE_UFS & STORAGE_NVME to switch storage.
2. rp11 off change to on.
BUG:b:263846075
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I35c02ac9cbb8442d7b4aae57f6c7b576b2b5f77b
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72090
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100
MHz for starting next phase.
BUG=b:267539952
TEST=None
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Id46201351780bb5bc05422ff36dad6972285690e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Create the aurash variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:263691099
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_AURASH
Change-Id: I595102778071f822c5cf69ceadeed174e5ea4836
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72837
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move get_loglevel_from_vpd from mb/ocp/deltalake to driver
drivers/ocp/vpd/loglevel_vpd.c.
Change-Id: I70af1051f63c527fd8150f5ecbe4765b4aaacd20
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71936
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch enables PCI Express Advanced Error Reporting Capability for
WWAN, WLAN, and SSD root ports. On enabling PCIE_RP_AER, PCIE device
will automatically report (if any error) about the error nature to the
corresponding PCIe root port.
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Iab8619818e2219b41287b895513eb04b0464401e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Intel ADL-P USB Type-C ports are not compatible with Parade PS8815
retimer on USB U1/U2 transition. The usb_lpm_incapable config is
used to disable USB U1/U2 transition for these Type-C ports.
This patch add usb_lpm_incapable config for the following variants
with PS8815 retimer:
- kinox MLB: C0
- volmar DB: C1
- osiris MLB: C0/C1
- mithrax DB: C1
- felwinter DB: C1
- taeko DB: C1
- gimble DB: C1
- gimble4es DB: C1
- taniks DB: C1
- marasov DB: C2
- gaelin MLB: C0/C1
- skolas DB: C1
- skolas4es DB: C1
- brya0 DB: C1
BUG=b:253402457
TEST=Plug in device and check LPM sysfs nodes are disabled
localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u1
disabled
localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u2
disabled
Change-Id: Ie9246ff7908887404f49ec10ee781c8cba410557
Signed-off-by: Ron Lee <ron.lee@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add regulator VM18 support to supply power for BOE_TV110C9M_LL0.
BUG=b:244208960
TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt.
Change-Id: I13bafbe10a18a18e253575fd107c9b415f28ef01
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72748
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There might be inconsistence between regulator_id[] and
`enum mtk_regulator` when we need to add new regulator IDs for Geralt.
Therefore, we implement get_mt6366_regulator_id() to get regulator IDs.
BUG=None
TEST=build pass.
Change-Id: I3d28ebf2affe4e9464b1a7c1fb2bbb9e31d64a5e
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72838
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
update EC FW offset location in spirom to 0x81000
For mayan board EC FW is located at offset 0x81000 location,
0th location contains pointer to this EC FW location.
Change-Id: I63c797e12ed131e8411c11379f4db9bcc29b49a2
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch adds ACPI configuration for USB2/3 ports for mtlrvp as per
schematics. This helps in generating corresponding ACPI code at runtime
that includes port information.
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP. Connect USB device and check if
corresponding enumeration of USB device (14.0) is observed on executing
lspci.
00:14.0 USB controller: Intel Corporation Device 7e7d (rev 01)
00:14.1 USB controller: Intel Corporation Device 7e7e (rev 01)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie150247661322e3944be15dc70f66033266d8aac
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72787
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes BB retimer for tcss_dma0 and tcss_dma1 with respect
to GPP_B21 as per schematics.
+--------------+------------+
| tbt_pcie_rp0 | tcss_dma0 |
+--------------+------------+
| tbt_pcie_rp1 | tcss_dma0 |
+--------------+------------+
| tbt_pcie_rp2 | tcss_dma1 |
+--------------+------------+
| tbt_pcie_rp3 | tcss_dma1 |
+--------------+------------+
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration
of tbt_pcie_rp as part of lspci.
00:07.0 PCI bridge: Intel Corporation Device 7ec4
00:07.1 PCI bridge: Intel Corporation Device 7ec5
00:07.2 PCI bridge: Intel Corporation Device 7ec6
00:07.3 PCI bridge: Intel Corporation Device 7ec7
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie1a0026b064aa4f7fcd27e75c0b0d052ec620dcc
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72786
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch describes the TCSS USB ports for mtlrvp as per schematics.
This patch describes TCSS ports for UPC_TYPE_C_USB2_SS_SWITCH as below,
tcss_usb3_port1: USB3 Type-C Port C0
tcss_usb3_port2: USB3 Type-C Port C1
tcss_usb3_port3: USB3 Type-C Port C2
tcss_usb3_port4: USB3 Type-C Port C3
BUG=b:224325352
BRANCH=None
TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration
of xhci (0d.0) as part of lspci. Also verify the enumeration of Type-C
ports as part of cbmem -c.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I0054ac4e3d1d9b97cfea615831ec8f3d3e00c9e0
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72785
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables FM350GL 5G WWAN support for mtlrvp.
BUG=b:224325352
BRANCH=None
TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module 00:1c.6
is enumerated as part of lspci and cbmem -c in AP console. Also verify
generation of PXSX Device as part of SSDT. Able to connect WiFi and
access internet.
cbmem -c:
\_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3)
\_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL)
SSDT:
Scope (\_SB.PCI0.RP07)
{
Device (PXSX)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I870cc0782fb989f1bdbe369a4a12630a62729d8e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72779
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with
VBOOT_VBNV_FLASH for samsung boards lumpy and stumpy. 0x8000 unused
flash space is allocated for RW_NVRAM.
Previously BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES was selected for
CPU_INTEL_HASWELL, CPU_INTEL_MODEL_{2065X,206AX} and others (see [2]).
However, there seems to be no particular reason on those platforms.
We've dropped the config for haswell. Now drop it for
CPU_INTEL_MODEL_{2065X,206AX}, so that VBOOT_VBNV_FLASH can be enabled.
[1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1
[2] commit 6c2568f4f58b9a1b209c9af36d7f980fde784f08
("drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES config")
BUG=b:235293589
TEST=./util/abuild/abuild -a -t SAMSUNG_LUMPY -x
Change-Id: I833edd4f7a328b21e81c971ba8a9aec0aad7d3d3
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Create the constitution variant of the brask reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:267539938
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_CONSTITUTION
Change-Id: Idb6089561d3aa5aac4448f9d46347c731f027e9c
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72730
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables GSPI [1] interface for mtlrvp based on mtlrvp
schematics.
BUG=b:224325352
BRANCH=None
TEST=Able to observe corresponding UPD configuration with FSP dump and
able to boot mtlrvp (LP5/DDR5) to ChromeOS. (Base patch for CB:71223)
SPI[0].Mode = 0
SPI[0].DefaultCsOutput = 0
SPI[0].CsMode = 0
SPI[0].CsState = 0
SPI[1].Mode = 1
SPI[1].DefaultCsOutput = 0
SPI[1].CsMode = 0
SPI[1].CsState = 0
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I3d4c4f19dd80fefa80c365b5ecac0a234f5af860
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
