| Age | Commit message (Collapse) | Author |
|---|
|
Strengthen PUs on all eMMC pins to fix problems with eMMC not coming up
on certain boards.
BUG=chrome-os-partner:24353
TEST=Manual. Burn FW on board that previously failed to boot eMMC,
verify chromeos can now install + boot from eMMC.
BRANCH=none
Change-Id: I7a9742968b8b8c2c42285ffc21de46aed9c87fb7
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178917
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4991
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Rambi 1.5 boards use the native SD card controller on baytrail.
Therefore, enable those signals. The CLK, D*, and CMD pins use
2K pulls as these were shown to not exhibit any errors when
doing reads or writes to a DDR50 sd card.
Note that if a servo is connected on needs to enable the
sd_vref_sel rail to pp1800 as this causes issues with card
detect if it is not set to pp1800.
BUG=chrome-os-partner:24312
BRANCH=None
TEST=Built and booted. Tested sd card read and write works in kernel.
Also noted that write protect detection works as well.
Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178961
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4990
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Rambi has the LPE audio codec connected to PMC_PLT_CLK[0].
Configure it for 25MHz.
BUG=chrome-os-partner:23791
BRANCH=None
TEST=Built and booted. Noted message in console output.
Change-Id: I11297ba951149e5831c65ca70ac7bdbbed113098
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178781
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4987
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Ic555d23a9112677a784dd814601f8202d4d17261
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5691
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Some 1.5 boards have a single channel ram configuration.
Accomodate such configs.
BUG=chrome-os-partner:22865
BRANCH=None
TEST=Built and booted ChromeOS.
Change-Id: I513327e47b9211d2dd1ea960d7da671a3773cb91
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/178340
Reviewed-by: Nick Sanders <nsanders@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Nick Sanders <nsanders@chromium.org>
Reviewed-on: http://review.coreboot.org/4983
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The level shifting between 3.3V and 1.8V for the SERIRQ
signal is not working. Instead use the SERIRQ pad as
a gpio which is used as a direct IRQ signal for the
keyboard interupt.
BUG=chrome-os-partner:23965
BRANCH=None
TEST=Built and booted rambi. Keyboard works with associated EC change.
CQ-DEPEND=CL:177189
Change-Id: Ifc270ca38207828a6d4711551d4bde9121559cca
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177223
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-on: http://review.coreboot.org/4979
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The romstage code for rambi uses the mmio way of reading
inputs. However, this is a problem is the GPIOs are set up
as legacy mode. Subsequent warm resets mean the ram_id is
read incorrectly. Ensure the ram_id is read consistently
by keeping the GPIOs for ram_id in mmio mode.
BUG=chrome-os-partner:24085
BRANCH=None
TEST=Built and booted. And rebooted. Now seeing consistent ram_id
values on warm resets.
Change-Id: Ieff98c000be80998854f325754f1e819975d2be5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/177230
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4977
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Some of the drivers in the kernel were not so happy about
having shared IRQs. Also, sharing IRQs means more code
needs to be run in interrupt context to determine if the IRQ
was meant for a particular device. Fix this.
No more 'mmc1: got irq while runtime suspended' messages.
BUG=chrome-os-partner:24056
BRANCH=None
TEST=Built and booted. Looked at /proc/interrupts and noted no
more sharing between pci devices.
Change-Id: Ie5da102204ffe3156dd55ab17af77df245a57c97
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176792
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4973
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The kernel chromeos_laptop driver nomenclature expects the
board name to not be in all caps. Fix this as well as the i2c
address for the trackpad.
BUG=chrome-os-partner:24307
BRANCH=None
TEST=Built and booted. trackpad device is found. IRQs still not
working yet.
Change-Id: Id6be8ee4bce2835e303ea4fe63944be80d2d7ec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176680
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/4970
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Also add the relevant info about these pins to the ASL tables + add
SMBIOS type 41 data for these parts.
BUG=chrome-os-partner:22863
TEST=Manual on Rambi. Set some pins to GPIO_DIRQ, and then verify DIRQ
regwrites w/ GPIO_DEBUG look correct.
Change-Id: Id40655f9fb2ea7b10e1ff58d0b2a8b4cc6f05ff8
Reviewed-on: https://chromium-review.googlesource.com/176299
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4963
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.
These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.
In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.
Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.
We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.
Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
For some reason HDA can now be disabled. It's unclear what changes
in the baytrail code allowed this to happen, sadly.
BUG=chrome-os-partner:22871
BRANCH=None
TEST=Noted hda is not in lspci.
Change-Id: I64e2560533be6f701fa66cd53c906b62b09012ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176394
Reviewed-on: http://review.coreboot.org/4961
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rambi has 3 pins that need to be configured for SCI and SMI:
1. GPIO_CORE[0] - runtime SCI pin
2. GPIO_SUS[7] - SMI for firmware lid events
3. GPIO_SUS[0] - wake pin for S3 wakes from EC.
Configure these pins now that the rest of the infrastructure
is in place. The one thing that is yet to work is runtime SCI
for lid events once booted.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=built and booted. lid close at rec screen works. And wake
from S3 with a keyboard press works.
Change-Id: I5f8e38ec5f4cf1a8ef7aa7fcee9abc344d9b184f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176393
Reviewed-on: http://review.coreboot.org/4960
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
As rambi is a baytrail board it doesn't have a dedicated wake pin.
Therefore, one needs to enable the proper GPIO to wake up the sytem
before going into S3.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Put system into S3. Keyboard press created wake event. Also, typed
'lidclose' on EC console while at recovery screen. Machine properly
shutdown.
Change-Id: Ic67b6bce93d57c620f498505d83197e4ae34a07d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176392
Reviewed-on: http://review.coreboot.org/4959
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The superio.asl file allows for the mainboard to hang
devices off of the LPC bus in ACPI. Include the keyboard
controller, EC memory map, and host interface's resources.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Noted resource reservations in dmesg.
Change-Id: Ida6481cd4c4725b5d3946bc64179ee99c93b0106
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176134
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4950
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fix the SMI and SCI gpios for Rambi. Also, add in the
EC callbacks for the SMI handler. Note that the handler
for GPI SMIs has not been tested yet as baytrail chipset
code doesn't yet support setting up those configurations
yet.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Noted that SCI was enabled in /sys/firmware/acpi/interrupts
for the EC's SCI GPI. Also was able to see Chrome EC messages
with CONFIG_DEBUG_SMI and powering down at the dev screen.
Change-Id: I67b278fd38e1c09271d2c1e16e42f6e8c49e3a70
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176077
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4948
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Baytrail has a configurable SCI irq. Add support for
properly configuring SCI irq. Note that it is currently
fixed to IRQ9, but the code supports setting it to the
other supported values. The current mainboards using
baytrail defer the madt IRQ override information to the
chipset.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted. Noted 'SCI is IRQ9' message.
Change-Id: I7b307bd58f9de944f0cb4c116107a15345499f2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176075
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4946
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These changes to the eMMC pads allows the kernel to see the
eMMC device. One is able to install onto the eMMC device, and
the kernel is loaded and booted from eMMC device. Note, that
it may not fully boot because of other issues such as
not-completely working ACPI support.
BUG=chrome-os-partner:22580
BRANCH=None
TEST=booted off of usb drive. can see eMMC device.
Change-Id: I9c088398297a0b559383bdf4a389dd19a1110e0f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176073
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4945
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
For some mysterious reason GPIO_S0_NC22 is making the eDP panel
go entirely white when it is configured with internal pullup.
Since these (supposedly XDP related) pins are unknown functionality
lets set them to GPIO_DEFAULT instead of GPIO_NC.
Additionally the VBIOS is being changed to issue int15 callback
to determine the boot graphics device. If we list both LFP and EFP
then the dev/rec screens will show on the panel when HDMI is not
attached and otherwise will display on HDMI.
BUG=chrome-os-partner:23507
BRANCH=rambi
TEST=build and boot on rambi, see firmware/kernel screens on the panel
when HDMI is not attached, and firmware screens on the panel and
kernel screens on both when HDMI is attached.
Change-Id: Ieb05a591d63c4f8e09fa154eeb76004d32579508
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175952
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4944
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
linux/drivers/platform/x86/thinkpad_acpi.c looks for an EC
version string before loading, this code copies the vendor BIOS by
exposing this string. This was originally part of x60's mainboard.c
Change-Id: I5e54ea2833252bc4dbba46ceb67d78c435b34845
Signed-off-by: Trevor Mosey <uberushaximus@gmail.com>
Reviewed-on: http://review.coreboot.org/5638
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The FADT for baytrail had incorrect offsets leading to
the kernel spewing a huge mess of ACPI errors. Fix these offsets
to be initialized in the chipset code.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted into kernel on rambi. Login screen comes up.
Change-Id: I89fc2a4fd800ff01cedf89b51cfb1369aceb9f03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175663
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4941
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This provides the initial support for interrupt routing
in bay trail. It includes both acpi changes and board changes
to ensure the interdependencies are met with the current ASL
code. The PIRQ routing is handled by the mainboard exporting
an irqroute.h header that describes the per device and PIRQ
PCI settings.
There are still a lot of ACPI errors in the kernel with this
change, though.
BUG=chrome-os-partner:23505
BRANCH=None
TEST=Built and booted rambi into kernel.
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Id8a865a24fc8d49743c0b54efdb64aaef52fcd8e
Reviewed-on: https://chromium-review.googlesource.com/175700
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4940
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Already done for fam15tn and fam16kb.
Change-Id: I3da36bfe6fd1805867eee5aa1f017c4fda084349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5660
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Heap allocation begins with BIOS_HEAP_MANAGER, no need to clear
the fields individually.
Change-Id: Ia1af84bd09d1edf8f72223752557d44a96dec6e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5659
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Backported from fam15tn and fam16kb.
This also implements GetHeapBase() to satisfy some requirements
of HAVE_ACPI_RESUME for the following boards:
amd/inagua
amd/south_station
amd/union_station
asrock/e350m1
Change-Id: I488d063d4eabf4bf45bcbabd1e8f13b88b2ef401
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5658
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Backported from fam15tn and fam16kb.
Change-Id: I868352b32ff56a8386c615ab1a9f59e7e875292e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5657
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
These function prototypes to remain identical across all
AGESA families.
Change-Id: If2a0a08fa7122e6becded37d032d3c40bde2d149
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
While fam15 boards do not select HAVE_ACPI_RESUME, backport this
from fam14.
Implementation of this function is common across different families.
Change-Id: I222b418a0a79bbdf5f5cce6c876243ecb4912256
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5655
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
While amd/torpedo does not select HAVE_ACPI_RESUME, backport this
from fam14.
Implementation of this function is common across different families.
Change-Id: I0e5099a0991a2655ec2b6990929196900e842fc1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5654
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Implementation of this function is common for all boards in family,
and also across different families.
Change-Id: I562a132fa6d3ade2700d9a375d7aa21fcf8ea890
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5653
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Implementation of this function is common for all boards in family,
and also across different families.
Change-Id: I6aab710e76af9a361f0c0006922019a52feb3f6f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5652
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Backport from fam15tn and fam16kb.
Change-Id: I6d8f9a88f0dc43c36efb168c0111a6e2bcdda5fd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5651
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Backported from fam15tn and fam16kb.
Change-Id: I13ca70d141a46220a5d8ea7bb3898bc7d7258424
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5650
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Implemented under northbridge/ on other families.
Change-Id: I4d21af9d6c0f61eb1597e8e7095c08dd87ae2a84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5649
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Although amd/torpedo is only fam12 board at the moment,
backported this from fam15tn and fam16kb.
Change-Id: I72a856e2eb455a8428a886f0c4217ff80e60eb78
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5648
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Ic9c5e8abb3da020a642635ee74c9242091923619
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5628
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In amd/{persimmon,inagua} and derived boards avoid using AGESA
reimplementation of memcpy as following the reasoning in:
e2f3bfc jetway/nf81-t56n-lf: Use std memset/memcpy func over AGESA
Change-Id: I943b46103c3bf1c5fd88b25e9f9595b9adfcafeb
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5625
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
mainboard_enable() is now modelled after google/parrot where the
enable function only sets dev->ops->init for the root device to
point to a mainboard_init() function, which in turn is called in a
later pass over the device tree to do the actual initialization.
Change-Id: I89a5192bd45ca8321b2b1ac49b073122e0f6ee2b
Signed-off-by: Trevor Mosey <uberushaximus@gmail.com>
Reviewed-on: http://review.coreboot.org/5637
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Some src/mainboard/*/*/romstage.c files use defines which later
modify the behaviour of included .c files.
Since it's a pain to work out what is affected by these, drop
values that are only defined in the board but never used, or
defined to identical values as in spd.h (and use that one instead).
Change-Id: I8143b26fddc32a40ac4e611a6287bf7f144267dc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5639
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
CONFIG_ARCH is a property of the cpu or soc rather than a property of the
board. Hence, move ARCH_* from every single board to respective cpu or soc
Kconfigs. Also update abuild to ignore ARCH_ from mainboards.
Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5570
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
RAMBASE, RAMTOP and XIP_ROM_SIZE are not used with ARCH_ARMV7.
Change-Id: I072ed022e3279ed23716fdf78d0db8952b3fdb32
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5627
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Following similar reasons as:
5ff4b08 jetway/nf81-t56n-lf: Sanitize #includes
Change-Id: Ie88b884bc2d4481bc2583d5be1f4d1376547f3c3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5614
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Jetway builds this hardware, so let us be sure to set the truth in the
DSDT Definition block and MPTables.
Change-Id: I2dfb89152aa3b895ec6975293c5a5998ab6b52bd
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5630
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Fix up commit dfa8a32f [1].
src/mainboard/asrock/e350m1: Properly indent devicetree.cb
[1] http://review.coreboot.org/5612
Change-Id: I59b3ec2f00d69951aa8a96c4a9c3de5b219acbfb
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5619
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Following the reasoning in,
dfa8a32 src/mainboard/asrock/e350m1: Properly indent devicetree.cb
Change-Id: I88ca01519c1c47a7eb0d564a55c945589f9d32af
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5629
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Use the generic implementation of winbond in place of the model specific
w83627thg_enable_serial() as so that it maybe removed later.
Change-Id: Ice1a0dc428de9a3ddfb79e877fb03c7a8e09665f
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5603
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I2ba7a1c2b2e6ce2c00c9a2916141bed67930ba2d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5586
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
A global flag oprom_is_loaded was used to indicate to
U-boot that VGA option ROM was loaded and run, or that
native VGA init was completed on GMA device.
Implement this feature without dependency to CHROMEOS option
and replace use of global variable oprom_is_loaded with call
to gfx_get_init_done().
Change-Id: I7e1afd752f18e5346dabdee62e4f7ea08ada5faf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4309
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently we have no developer or recovery mode switches when
building without ChromeOS.
Change-Id: I49adfcd8408838cf581430970be5efcef11ba06b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5596
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
There is a lot of NVS allocated to things that are not really
used. Most of these are removed and some are moved around.
Thermals are expected to be handled with DPTF so I've removed
that bit of code but have not yet cleaned up the thermal zone.
I left in the SIO BARs since I think we will need those still
even though they may need work still.
BUG=chrome-os-partner:23505
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: Id16ee67e6b3709a303c001afd72947147f938127
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175626
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4936
Tested-by: build bot (Jenkins)
|
|
Add a length define for all the reserved MMIO regions and
use them in the ACPI code to reserve the regions there.
Add a region for the "abort page" documented in the EDS.
BUG=chrome-os-partner:23505
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: I2060dca0636a2fdc0533ddd0826f94add2c272c3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175624
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4934
Tested-by: build bot (Jenkins)
|
|
- a few clock gating bits were set improperly and were preventing
the system from transitioning out of S0 state.
- the XHCC registers were not getting the top byte set properly
which includes things like DMA write request size and request
boundary crossing control. This was causing memory corruption.
BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=build and boot kernel from USB on rambi with XHCI driver
Change-Id: I8e8135a793dfbaa1f163766702e3a8f19bba9703
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175558
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4933
Tested-by: build bot (Jenkins)
|
|
Following the reasoning of:
dbbc136 mainboard/asrock/e350m1: Avoid including early_serial.c
Change-Id: I5d729b90cf6713de2674fb00c726cd2944a3ab4e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5597
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Correct selection of UART depends of board layout, not the CPU
internals, so default setting should originate from mainboard.
Change-Id: Ibf0ab0847ccce73c22704e86983dbe3d24ebc8a0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5618
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We have means to easily disable a specific console in romstage if
necessary, so this global option makes little sense.
The option was initially introduced as a work-around for build issues
around CACHE_AS_RAM, ROMCC and ARCH_ARMV7 dependencies for UARTs.
Change-Id: I797bdd11a48ddd813d3ee7ccef9a0c050f16f669
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5607
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The port for console remains to be a compile time constant.
The Kconfig option is changed to select an UART port with index
to avoid putting map of UART base addresses in Kconfigs.
With this change it is possible to have other than debug console
on different UART port.
Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5342
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
$ git grep -l Cnotr | xargs sed -i 's/Cnotr/Contr/g'
Change-Id: Iee826a8092dbf17f8a28b7eb7b6d183464c6e498
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5325
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Trivial: clean up spaces to tabs to properly indent devicetree.cb
Change-Id: Id5577139cfa039898af3b2158fdd6869ac9d2ec1
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5612
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I0dd50722c1ccbcb8a21b8fbab4d706d6b2f2b130
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5602
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Convert the serial init to the generic romstage component and
corresponding boards using this sio.
Change-Id: Ib9f981f43e047013f9cbe20a22246ee2ed3ecf50
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5589
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I8d258c12d03e71fb525251104b4fa81596ad2187
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5599
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Convert the serial init to the generic romstage component and
corresponding boards using this sio.
Change-Id: I36bcf38c4351130be1ed924ecfe606336d0433f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5588
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use generic winbond romstage serial init symbols instead of model
specific implementation. We do this on a case by case basis as some
boards are ROMCC and so need to #include .c files. This is a step to
migrate non-romcc boards to a more generic superio framework.
Change-Id: I56f6d9ec77cd21a612cbbdb48634543f34a2e72c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5591
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I24b2cbd671ac3a463562d284f06258140a019a37
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4683
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The romstage of Fintek Super I/O's is identical, leading to replication
of essentially the same code prone to bitrot. Herein we consolidate the
early pre-ram UART initialisation code into fintek/common, rather we
leave the exceptions to be implemented under model/.
More precisely we provide a well documented version of early_serial.c
under fintek/common and select by way of Kconfig as a generic romstage
component to Super I/O support. We leave future Super I/O's the option
to implement `non-standard` initialisation code should such a (unlikely)
need araise. A primary advantage is that new support for romstage serial
is now trival to add. We also provide some Kconfig documentation while
here.
Change-Id: I3c62561558a62ece944a167ba302fb7076bba001
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5575
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
A Kconfig option defined instead of selected that really comes from
somewhere else.
Change-Id: I8730d12ed053520b794655e943c93583c441f3f1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5542
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.
Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
There is redundancy in terms of use of init_timer. We have a Kconfig option to
decide whether a board has init_timer as well as we use a stub for init_timer in
places where we do not have any init_timer defined. Thus, remove the Kconfig
option. Henceforth, all boards that do not have init_timer functionality can
include a stub_timer if required.
Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Following the same reasoning as:
HASHHERE superio/ite/it8721f: Rewrite from hardcoded base addr
Removing hard coded magics and expose sio pnp api in romstage.
Change-Id: I27433cb1a84b3641a6110ecf6bd5021e00769aba
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5565
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Rewrite early_serial.c implementation to honour a passed base address in
device_t, removing any hard coding of values. We also expose early sio
init functions as romstage symbols to avoid falsely #including
"early_serial.c" in romstage.c of board support.
Change-Id: I521b8f7cf85173345b90745c6f2ab66e25429f5d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5561
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Dumping the ACPI tables in this way has limited use, is not likely to be
used and is poorly implemented. There are much more sophisticated tools
available on Linux for debugging ACPI as such this code is outside the
scope of coreboots 'bring up the hardware only' philosophy.
A more generic implemention could be done with hexdump() in coreboot
proper following on from this cleanup.
Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5530
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Not very popular nor useful nowadays.
Change-Id: I3dc0f7aaf188950a43f5350d3a95669fbbdcfd94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4554
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The PCIE PME pin from the APU is connected to GEVENT8, but the
northbridge's ASL hardcodes this to GPE 0x18. Adjust the SCI map
accordingly.
Change-Id: Ie395e62919f6e97ef9bcc45c736f9debf4e09ba0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5556
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Hudson ASL files assume the USB power event notifications are mapped
to GPE 0xb. Since that GPE is not used on this board, map these events
to GPE11. This GPE is already handled in ACPI via Method(_L0B). We
adjust this method to also notify the XHCI controller at PCI 10:0.
Change-Id: If33dd4bb5830820227f7c8b34594886cfae37282
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5554
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
The power button was declared by hudson's ASL as \_SB.PCI0.PWRB, and
always had the wake source declared as GPE3. This is not the correct
wake source for all boards. On some laptops declaring a wake source is
not needed, as the wake mechanism is handled by the EC.
Move the declaration of the power button to mainboard ASL files, and
scope it as \_SB.PWRB . This also makes the naming consistent with the
examples in the ACPI spec. The wake source for the PWRB of HP Pavilion
M6 1035dx is removed, as it is incorrect.
Change-Id: I9c76566025e7f200c0376673f6c6ea299afa4a5d
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5546
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Strip incorrect comments pretaining to the superio, and replace spaces
with tabs.
Change-Id: Ib3f6094c552777552d0ec06e3236210ee2e7b05d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5562
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
It's not needed, and puts the EC back into APM mode. The EC does not
shut down during S3 sleep, so we don't need to re-initialize it.
Lid SMI will have been disabled in the switch to ACPI mode, don't
re-enable it.
Change-Id: I2c06df140f63427dac32ae095d29e68f64135358
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5555
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch completes ACPI support for the lid switch. The lid SCI now
notifies the OSPM of the status change when the lid is closed or
opened, allowing system to suspend. The wake source is also declares,
and the system wakes when the lid is opened.
The system resumes successfully, but the display still does not come
back on.
Change-Id: I803c4fc64e15f8d1a90791ec246af66604646d8b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5549
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Each GEVENT pins can be mapped to a specific GPE via the SCI map.
The default mapping is not appropriate for this laptop, so use the
AGESA functionality to map currently known events.
Change-Id: Ifa50bf000cfc8e77a6a4d84752f89838f165f7a0
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5548
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
These definitions were scattered in a couple of files, and we risk
scattering them all over the place. Provide a common file for these
definitions.
Change-Id: I1fe99e5097cf10a349661f3b2ae2377f5cdd6103
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5547
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Following boards use cimx/sb700:
amd/dinar
supermicro/h8qgi
supermicro/h8scm
tyan/s8226
Only amd/dinar had APIC_ID_OFFSET defined, thus all had 0x0.
There was a nonsense preprocessor directive (MAX_CPUS * MAX_PHYSICAL_CPUS >= 1).
Except for tyan, (MAX_CPUS * MAX_PHYSICAL_CPUS) % 256 == 0.
Together with documented 4-bit restriction for APIC ID field, this APIC ID
programming matches with MP tables and ACPI tables.
I believe this would also fix cases of cimx/sb700 with MAX_CPUS<16, which
we do not have in the tree.
Change-Id: If8d65e95788ba02fc8d331a7af03a4d0d8cf5c69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5539
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
All boards had APIC_ID_OFFSET=0 and MAX_PHYSICAL_CPUS=1.
Change-Id: I6f08ea6de92a2af79fb3a99c5edd942b3a321c43
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5538
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
These are not used with cimx/sb900 vendorcode.
Change-Id: I489ee80c739b31edac649491497162c65316996e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5537
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I8c1548470c605d06825fe35579879e806bf33542
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5271
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I654ca745f7404b86aa25fb2e696751d616d0ca03
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5517
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I2e9ab68263648af8c9d46999e960f0a0711b61d7
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5516
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
This patch implements a simple interface between the EC and mainboard
ASL code. This interface does not rely on the preprocessor, and
prevents name conflicts by scoping the interface methods. As this
interface is documented on the coreboot wiki, an in-tree documentation
is not provided.
Change-Id: If0b09be4f5e17cc444539a30f0186590fa0b72b5
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5515
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
There is only one lid switch, so it does not make sense to number it.
This naming is also consistent with the examples in the ACPI spec.
Change-Id: Ida0a4a89ca03b2aad4fc77e52996e86332d370cd
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5545
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
This is handled by generating an SMI when GEVENT22 goes low. This pin
is driven by the EC when the lid opens or closes. This SMI is
disabled when switching to ACPI mode, so ACPI OSes are not affected.
Change-Id: I38193572bf0416fd642002dba94c19257f0f6f5b
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/171
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Refactor hudson_enable_gevent_smi() to allow configuring the interrupt
mode and trigger level. Move the utilities which are useful in SMM to
a separate file that is included in both ramstage and SMM. This is
useful for SMI handlers which need to enable or disable GEVENT SMIs
on-the-fly. A follow-up patch makes use of this infrastructure.
Change-Id: Ifa4c300c00c178b18d7280690cfc4b8367c669b8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/170
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Intercept the low battery SMI from the EC, and shut down the system
immediately. The EC only sends this SMI when the OS did not enable
ACPI mode, so ACPI OSes are not affected by this.
On the other hand, payloads such as GRUB or SeaBIOS will experience
the shutdown. This behavior is helpful for protecting the battery, for
example, when the OS fails to boot and we are stuck in the payload.
The low battery SMI is triggered at 10% charge, at which point the risk
of cell degradation exists.
Change-Id: I4c6c1a4feed8576cbdbb1945768de0805a1f5e42
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5527
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
SMP and IOAPIC shouldn't need to be redefined here, select is enough
Change-Id: I8a66374205b671498ce21b3f174af14e98dbfe48
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5541
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I81de291da7b3db8d04a127d5a304b558f1c75b34
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5535
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Dumping ACPI tables in canonical form has very little value, and is
of questionable use except when debugging acpigen. Remove the code
which dumps the tables.
Change-Id: Id13c88cee8674b13e5cf5b5ed32c26283e586fd9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5526
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC may disable some functionality, such as Caps Lock LED and
battery charging if it never receives a command to go in APM mode. If
we start it in APM mode, then immediately switch to ACPI mode, it will
not get its SCIs serviced until an ACPI OS boots. If its SCIs are not
serviced, it may assume the OS has hung.
The way we solve this is to initalize the EC in APM mode, and only
switch it to ACPI when an ACPI-capable OS issues the ACPI_ENABLE
command. The switch has to be handled in SMM.
Although we aren't yet processing SMIs from the EC, we are reading the
status in order to satisfy the EC that the event is handled.
Change-Id: Iffaeb9a6f57841f456c4bce8337dc09b287f8758
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5512
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I9c41cccf9058c48006b247aca705a3f869ae82a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5524
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The MMIO region is set up by AGESA very early on, so we can use it to
access the PM register space in ramstage. 16-bit accessors are also
provided to simplify some setup tasks. 16-bit accesses are not
possible via PIO.
The pm2_iowrite/read accessors are removed, as they are not used.
Change-Id: Ie7967b5086eb004525c39721338c6495aedc8165
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/5503
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Not used with AGESA vendorcode.
Change-Id: I4de7e49d513a1bc8d6d4da1eea630b9eedf5de80
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5522
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: I1c4e1dea8836143334d336f99afcee2ca326b0c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5521
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Not used with AGESA vendorcode.
Change-Id: Ic9a0513641bf76d748bb106675bccc33c7abe21e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5520
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
