summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2015-07-09veyron_{brain,danger,mickey,romy}: Select PHYSICAL_REC_SWITCHDavid Hendricks
BUG=chrome-os-partner:42220 BRANCH=veyron TEST=Used physical recovery button to enter dev mode on mickey Change-Id: I78332f516b042be9c0cef6d8a59af44b670fc260 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4fcd79a133dc750dffd5d23e0b84a109e7b7cb8d Original-Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/283546 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10844 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-09smaug: Update PMIC settingsFurquan Shaikh
Update PMIC settings as per table provided by hardware eng team. Change-Id: I17a8a1a44fa8c9093e13e8d7e4a2f5b07a3b1f1f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c49afd0d1a17b73f2192206ff7389e2f7930fec Original-Change-Id: I027febb6849f1c4d15bf56d8bcd29c431655c7b6 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/283543 Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/10843 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-09veyron_danger: Enable developer mode switchDavid Hendricks
Danger has a physical developer mode switch, it was just never set up. This patch defines it, sets it up in fill_lb_gpios(), and disables VIRTUAL_DEV_SWITCH. Note: For now at least, dev mode is a bit wonky on Danger. It's connected to both a DIP switch and a button. The button is normally open, pulling dev mode high (defaulting to ON). The switch's "ON" position will pull the value low, so we invert the value in coreboot to see the expected behavior. Dev mode is enabled by holding the button down during boot or by setting switch 2 in the DIP bank to the ON position. BUG=none BRANCH=none TEST=toggled dev switch on Danger and saw dev screen show up (or not) as expected Change-Id: I9369b96b6c9b54553d969b919ed663abdc704dd2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dce53f1a31919f15f6e46c4a7d1c5ce541c2b318 Original-Change-Id: I737f165d7704e2f73375099367f012b365e3e77d Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/280852 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10839 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-07marvel/bg4cd: move timestamp init to SoC codePatrick Georgi
No need to repeat this in the mainboard code (even if there's only one right now). Change-Id: Iaa3508c27f8c38cfa343ab1d8a094ce922dec157 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/10825 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-07rk3288: Use timestamp region for pre-cbmem timestampsFurquan Shaikh
BUG=None BRANCH=None TEST=Compiles successfully for veyron_pinky Original-Change-Id: I3862e9bf2c32085c921adae4c1dcdf88ff0f3ff3 Original-Signed-off-by: Furquan Shaikh <furquan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/227243 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org> Original-Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 0fabdbb05826160beb8ee8f89339b18a49e87ab8) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I4504d29a43084d4bd406626899b25903200fa6d7 Reviewed-on: http://review.coreboot.org/10740 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-07-07x86: Drop -Wa,--divideStefan Reinauer
Fix up all the code that is using / to use >> for divisions instead. Change-Id: I8a6deb0aa090e0df71d90a5509c911b295833cea Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10819 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-07amd/lamar: drop unused value from mainboard_intr_data[]Stefan Reinauer
This value is overwritten in the next line. Change-Id: I622c35b8d78f6b01f2532dd8b40db15b2e888f58 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10822 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-07mainboard/msi/ms7135: remove bogus MADT IRQ override for timerJonathan A. Kollasch
Stops Linux from complaining: [0.097286] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [0.100005] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [0.100005] ...trying to set up timer (IRQ0) through the 8259A ... [0.100005] ..... (found apic 0 pin 0) ... [0.143507] ....... works. Change-Id: Ic09a6940f80e3da2c1f3c0ef04fb50a4096b7943 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10642 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-06veyron*: Kill SKIP_DISPLAY_INIT_HACKDavid Hendricks
Now that we have functioning display code for all platforms, we can just get rid of this ugly hack used on non-Chromebook veyrons. BUG=none BRANCH=none TEST=built for Brain, Rialto, Mickey, Romy Change-Id: Ibe248c7cc74940811345c249d66992d74fe85fe5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9c627b087ba9fc07b4ec4a6d55d2e0203bdd4ff5 Original-Change-Id: I946eddb4e8ce1dbaa20212a2bb417e71a31b2ba3 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282049 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10785 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-07-06veyron_rialto: Use VOP_MODE_NONE for display init.David Hendricks
This uses VOP_MODE_NONE for display init on veyron_rialto and adds a mainboard_power_on_backlight() stub so that we can finally get rid of SKIP_DISPLAY_INIT_HACK. BUG=none BRANCH=none TEST=built for veyron_rialto Change-Id: Ia6b420a962fe266e773c804b8e5c68da35848753 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a290c938c163759a3672c07d8ec7c0a38057b13d Original-Change-Id: Iec2d7f03857198a4d6f7490db1e3e19c74f18c43 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282048 Reviewed-on: http://review.coreboot.org/10784 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06veyron_brain: Add basic HDMI supportDavid Hendricks
This adds a configure_hdmi() function that drives the HDMI enable output high and configures the iomux. Calls to PMIC functions to enable HDMI power are moved here as well. BUG=none BRANCH=none TEST=with follow-up patches, we now get a dev screen on Brain. Change-Id: Ifd2648376c789fb29c9e2e4ab6bdb10ca439e4a2 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 91ec6a96edaf2042236aee0383e18715014f1013 Original-Change-Id: I0c6e9f8fc5e06f53a1a160d8ab2e32447168139e Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282046 Reviewed-on: http://review.coreboot.org/10778 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-06veyron_*: Set vop_mode in devicetree.cb filesDavid Hendricks
This avoids any ambiguity or breakage in case the vop_modes get shuffled around or changed in some future patch or copy+paste job. Brain and Rialto need some more work done so their devicetree.cb files will be updated in follow-up patches. BUG=none BRANCH=none TEST=compiled only (for danger, jerry, mickey, romy, speedy) Change-Id: I4fd549c82c8a5c31525c4e485fa8df73f33f2049 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bd88973b53949058331613c7582650fbd4ea48db Original-Change-Id: I47da45c5fd9648544392de8d76f86af812de9093 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/282610 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10776 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-06veyron_danger: EDP changes for v2David Hendricks
EDP-related hardware modifications for v2: - BL_EN moved from GPIO7_A3 to GPIO7_A2 - EDP_HPD added to GPIO7_B3 BUG=none BRANCH=none TEST=built and booted Danger v2 with EDP panel attached, saw dev mode screen come up Change-Id: I47383610082b371a612aced656e56f1bd1cfa098 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fb939ff17cca7bbd24aabfdb3cbd444696a5a845 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Change-Id: Id271cdcfcde6fa84c1bb707b9842bddd77a7121b Original-Reviewed-on: https://chromium-review.googlesource.com/280855 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10771 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-05nvidia/l1_2pvv: whitespace: remove spaces that are followed by tabJonathan A. Kollasch
Change-Id: Ia84df2f4467e102fd5f675dba6432996584d78c1 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10796 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2015-07-04Kconfig: Fix references to obsolete symbolsMartin Roth
These are all Kconfig symbols that have been removed or renamed. USE_PRINTK_IN_CAR was removed in commit 8c4f31b3 Drop the USE_PRINTK_IN_CAR option. It's a bogus decision... DYNAMIC_CBMEM was removed in commit e2b0affd Remove Kconfig variable that has no effect MAINBOARD_HAS_BOOTBLOCK_INIT was removed in commit 342535cc Remove Kconfig variable that has no effect CACHE_ROM was removed in commit 4337020b Remove CACHE_ROM. SMM_MODULES was removed in commit 44cbe10f smm: Merge configs SMM_MODULES and SMM_TSEG INCLUDE_MICROCODE_IN_BUILD was removed in commit eb73a218 soc/fsp_baytrail: Fix use of microcode-related Kconfig variables CAR_MIGRATION was removed in commit cbf5bdfe CBMEM: Always select CAR_MIGRATION REQUIRES_BLOB was removed in commit 70c85eab build system: Retire REQUIRES_BLOB CPU_MICROCODE_IN_CBFS was renamed to SUPPORT_CPU_UCODE_IN_CBFS in commit 66e0c4c8 - cpu: Rename CPU_MICROCODE_IN_CBFS to SUPPORT_CPU_UCODE_IN_CBFS CONSOLE_SERIAL_UART was renamed to CONSOLE_SERIAL in commit afa7b13b uart: Redefine Kconfig options CONSOLE_SERIAL8250MEM was renamed to DRIVERS_UART_8250MEM in commit afa7b13b - uart: Redefine Kconfig options Change-Id: I8952ca8c53ac2e6cec5f9c77d2f413f086bfab9d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10766 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-07-03hp/pavilion_m6_1035dx: Remove 'select USBDEBUG_IN_ROMSTAGE'Kimarie Hoot
Since USBDEBUG is not selected by this platform, there is no benefit to selecting USBDEBUG_IN_ROMSTAGE in the mainboard Kconfig. Further, using a 'select' for USBDEBUG_IN_ROMSTAGE prevents the value from being modified by a user in menuconfig. Change-Id: I67b71a724a8614882cff4bb43b042f0c092d11d2 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/10671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-03Kconfig whitespace cleanup: Change leading spaces to tabsMartin Roth
Change-Id: Icab6bd9f55f086da7b51ae463f34e29366d50e1a Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10764 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-03storm: Enable DRIVER_UART since we use CONSOLE_CBMEM_DUMP_TO_UARTStefan Reinauer
This fixes the build with CONSOLE_CBMEM_DUMP_TO_UART. Change-Id: Ibe79239c5799a5c4a08ed195fce4d0c63d629ca4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10769 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-07-02tegra124: verified boot fixupsStefan Reinauer
This patch fixes up verified boot (vboot2) configuration of all tegra 124 bases boards in the tree. Change-Id: I81f2e83821cbfdbe2a55095543e7447efdde494e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10761 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-07-02purin: chromeos.c also needed in romstageStefan Reinauer
Otherwise the Chrome OS build won't succeed. Change-Id: Idf93a09f53d08b6c201f1de140f0fff35f928dcc Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10760 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2015-07-02Move baytrail & fsp_baytrail to the common IFD interface.Martin Roth
- Add the common/firmware subdir to the baytrail & fsp_baytrail makefiles and remove the code it replaces. - Update baytrail & fsp_baytrail Kconfigs to use the common code. - Update the IFD Kconfig help and prompts for the TXE vs ME. - Whittle away at the CBFS_SIZE defaults. All the fsp_baytrail platforms have their own defaults. Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10647 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-07-01google/veyron_minnie: Add new boardPatrick Georgi
Copied from speedy, with changes to mainboard.c (and speedy -> minnie renames across the directory) Change-Id: Ib38f0b15da8306984869e7ee7b4ddf366b0df82c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10757 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-30google/foster: roll up fixes to compile with vbootPatrick Georgi
Change-Id: I796e0fa64f9a858a54b09a82fbec1f0576e7e124 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10732 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-30google/smaug: roll up fixes to compile with vbootPatrick Georgi
Change-Id: I256410ff6c0107bbbaaf49b909d63ca61e88a22c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10731 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-30google/smaug: add new mainboardPatrick Georgi
This is an nvidia t210 based board. This includes Chrome OS downstream up to Change-Id: Ic89ed54c. Change-Id: I4d77659f4f2d21b1bbdcfc3467e1a166c02ddd47 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10635 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/foster: add new mainboardPatrick Georgi
This is an nvidia t210 based board. This includes Chrome OS downstream up to Change-Id: Ic89ed54c. Change-Id: I8630e86a4b0e8756693f8989ce147d6d762cefe1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10634 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/peach_pit: disable Chrome OS supportPatrick Georgi
The Exynos SoC code and vboot really don't get along and things are not even in a good shape in Chrome OS' top of tree. Disable but don't rip out the support functions, so it could be revived. Change-Id: I982c5a3731b527fd1f1579e9de353819da656452 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10730 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/nyan: remove timestamp leftovers from upstreamingPatrick Georgi
Initializing timestamps and writing the "start romstage" timestamp already happens earlier. One question to sort out is what to do about the migration into cbmem, but at least this compiles again. Change-Id: Ie8a0b7998c6c9da71f036857987f3c781385034f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10729 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/link: implement get_write_protect_statePatrick Georgi
Current vboot wants that function. Change-Id: I9d3a592c448cf2af10f76cae4518341cbc0a6f41 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10727 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30samsung/stumpy: implement get_write_protect_statePatrick Georgi
Current vboot wants that function. Change-Id: Ie3b49aa716d9711223ec71a142878e847eedfe4e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10726 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30samsung/lumpy: implement get_write_protect_statePatrick Georgi
Current vboot wants that function. Change-Id: I08590739112a7fcce7a983b6d77ff500692ef7d3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10725 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/jecht: Fix compiling GPIO table codePatrick Georgi
A lot changed here between Chrome OS and upstream, and these changes are needed to reflect that. Change-Id: I7195861465388d0f6a7cb540ebf4e410e38c260a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10723 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/cosmos: romstage needs the accessor functions for buttonsPatrick Georgi
In Chrome OS mode, the romstage tries to interpret the various buttons on the device, so it needs access to the accessor functions. Change-Id: Iecfd37e79883d826e15c474d77095fbbbb2b7cea Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10705 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/storm: romstage needs the accessor functions for buttonsPatrick Georgi
In Chrome OS mode, the romstage tries to interpret the various buttons on the device, so it needs access to the accessor functions. Change-Id: I59a4f892ca84d475d8f46c8f8c1906dae10ad32d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10704 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30qualcomm/ipq806x: centralize vboot configurationPatrick Georgi
vboot configuration (separate stage or not, which stage loads romstage) depends on SoC properties (eg. amount of SRAM), not on board specifics, so move this part of the configuration to the SoC. Change-Id: I70b4cd1794ddf2aba7cdae94859ea1d76ae019f4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10702 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30google/veyron: Fix building with CHROMEOS enabledPatrick Georgi
romstage requires some button accessor functions for the Chrome OS boot flow. Change-Id: I3f90d66b103e0610931c183dd5f5679ca6f910f6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10697 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-30mainboard: Add Veyron_SharkJulius Werner
This patch adds the Veyron_Shark mainboard as a clean copy of Veyron_Speedy. - board-ID differentiation removed, see mainboard.c - speedy -> shark rename BRANCH=None BUG=None TEST=Compiled. Change-Id: I3b743a97f152f49647eee87be8f1497377ccacb4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ac2ca328adf7e0dd879f51bbeae3cc11bceebf86 Original-Change-Id: I8a7cc9acb199ecf23b388c66f6885931ea3ec219 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/276490 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/10699 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-30Add Kconfig flag to specify if there's a lid switchPatrick Georgi
Not all devices have a lid switch, so we need to state this somehow. Since the alternative would be to extend get_lid_switch()'s semantics to become a tri-state (open, closed, N/A), do this through Kconfig. BRANCH=none BUG=chromium:446945 TEST=none Change-Id: Icc50f72535f256051a59925a178fb27b2e8f7e55 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: d20a1d1a22d64546a5d8761b18ab29732ec0b848 Original-Change-Id: Ie8ac401fbaad5b5a9f1dec2b67847c81f4cc94aa Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/273850 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10692 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30Expose get_lid_switch() in romstagePatrick Georgi
The function was used locally and in ramstage to set some coreboot tables. It's also needed in romstage to deal with "lid closed" behaviour. BRANCH=none BUG=chromium:446945 TEST=none Change-Id: I8ad7061328c45803699321aa9f5edb0ed2288a8d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 78281a104fb9d79696a6ceb2a9a89a391146a424 Original-Change-Id: I56314b9dc9062dd61671982e7ec0ff15d7eb1bae Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/273609 Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Queue: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30veyron_danger: Update SDMMC power on/off code for v2David Hendricks
This re-factors SDMMC power on/off to make corrections and take differences between board versions into account. To avoid similar- but-different case switch statements in romstage.c and mainboard.c, power on/off functions for SDMMC are split into their own .c file. BUG=none BRANCH=none TEST=built and booted of micro-SD card on Danger v2 Change-Id: Ib3069c35ceff1ff98b49579a6298681c1390beee Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: eecfee4a5dd39073b5f966a25991a594b3c4b519 Original-Change-Id: Id86ae7f40687e843ffc4e7769309d4678ad54f49 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/280853 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10685 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-30veyron_danger: Add basic HDMI supportDavid Hendricks
This adds a configure_hdmi() function that drives the HDMI enable output high and configures the iomux. We'll add EDP/HDMI auto-detection in an upcoming patch. BUG=none BRANCH=none TEST=set vop_mode to 1 in Danger's devicetree.cb and saw dev mode screen output to HDMI display. Change-Id: I2a208059fee74d436b5a5bedbc677bc59525f935 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 721f326319f727afcf73a0c21d20d26cb463ad71 Original-Change-Id: I139d39749963d4121aaeec0c3da37d825ffa94ac Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/280849 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10684 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-29mainboard/msi/ms7135: DSDT: fix PCI and AGR interruptsJonathan A. Kollasch
Tested with interrupting AGP card in AGR slot. PCI slots tested with 3-function OHCI/EHCI USB 2.0 card, covering the INTA-INTC lines in each. Change-Id: I0f8aeba90890a76a7cf9cbee9be7bcf919d1e39a Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10644 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-29mainboard/msi/ms7135: only #include necessary headers in acpi_tables.cJonathan A. Kollasch
Change-Id: I0837a2d1e0d8e233f6ef7d7212ce76f2223d19b9 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10641 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-27mainboard/asus/kfsn4-dre: Enable VGA supportTimothy Pearson
The ASUS KFSN4-DRE has full native VGA support, enable support for the VGA device by default in the Kconfig file. Change-Id: I09fc8845a30f26ca49f3547812f9784621ff4b5e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/10673 Tested-by: build bot (Jenkins) Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-06-27lenovo/g505s: Add System Board ID to fix ACPI warningMartin Roth
Add the System Board Hardware ID to fix the warning: dsdt.aml 88: Device (MB) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) Change-Id: Ie97b1e6792c8d4c8db2500cef6a79881b7ff94c8 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10669 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-27google/parrot: Add System Board ID to fix ACPI warningMartin Roth
Add the System Board Hardware ID to fix the warning: dsdt.aml 88: Device (MB) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) Change-Id: I063580142ae8053fdc05e165c01e86b8b7cd5ca6 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10668 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-27Kconfig: Remove unnecessary and incorrect MRC_CACHE symbolsMartin Roth
Because of a misunderstanding of how Kconfig files are parsed, the OVERRIDE_MRC_CACHE_LOC symbol was added to make sure that the value was correctly set. This is not needed unless for some reason the Kconfig parser is suddenly rewritten to parse everything differently. At some point, the value in the FSP's Kconfig file was updated to OVERRIDE_CACHE_CACHE_LOC, while the entries in the mainboard Kconfig files were not updated. This resulted in the default values not getting set correctly by default on the FSP Bay Trail boards. This removes the whole bunch of incorrect and unnecessary symbols and just sets the default for the MRC cache location directly. Change-Id: I1cec758576866b7e0677272b8309bfde8d4a1ee4 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10611 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-27amd/inagua: broadcom driver 64bit fixStefan Reinauer
Change-Id: I357f11fa74bac5f9e1ecfc91a91f06127334752d Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10596 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-26rockchip/rk3288: complete vboot configuration and move to SoCPatrick Georgi
Where vboot verification can start, and how the code flow looks like is more a property of the SoC (and its properties, like amount of SRAM) rather than the board. Change-Id: I610153ea4ceddc226d8cc3e17a515e41fc0479cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10662 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-26google/veyron_speedy: Add chromeos.c to romstagePatrick Georgi
vboot requires it. Change-Id: Iae2310c9b9c311c3f64b8417295685261ba404b0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10659 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-24pcengines/apu1: Remove unused ide.aslTobias Diedrich
The APU1 board has no IDE port, remove ide.asl. Change-Id: I76b926969748de79ac1281ed50b37e9ade1a6771 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10622 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-24Remove address from GPLv2 headersPatrick Georgi
Follow up for commit b890a12, some contributions brought back a number of FSF addresses, so get rid of them again. Change-Id: Icf83d5e2a3daea385af3572e9eac6b2431652c28 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10640 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-24Kconfig: Get rid of obsolete symbolsMartin Roth
CAR_MIGRATION was removed in commit: cbf5bdfe - CBMEM: Always select CAR_MIGRATION ALT_CBFS_LOAD_PAYLOAD was removed in commit: cf6c9cc2 - Kill ALT_CBFS_LOAD_PAYLOAD MARK_GRAPHICS_MEM_WRCOMB was removed in commit: 30fe6120 - MTRR: Mark all prefetchable resources as WRCOMB. EXTERNAL_MRC_BLOB was removed in commit: 0aede118 - Drop unused EXTERNAL_MRC_BLOB CACHE_ROM is only in Google's codebase. LID_SWITCH is only in Google's codebase. DEFAULT_POST_DEVICE_LPC is only in Sage's codebase. ROMSTAGE_RTC_INIT is only in Sage's codebase, or was never used. HUDSON_NOT_LEGACY_FREE never existed as far as I can tell. MAINBOARD_DO_EDID never existed as far as I can tell. Change-Id: I636ea7584fb47885638dbcd9ccedfafb1ca2c640 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10616 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-24sandy/ivy: Include IRQ routes from platformKyösti Mälkki
The default route does work for all Chromebooks and is replaced with platform-specific one in follow-up. Change-Id: Ia1839ed38dacf44a89dc757394d054e17666f193 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10442 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-23msi/ms7135: move power_on_after_fail out of RTC century byteJonathan A. Kollasch
Change-Id: I0796b6e7adad0151c5aa6271d62a2cf4abeedb1e Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10643 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-23southbridge/intel: Create common IFD Kconfig and MakefileMartin Roth
We've got a lot of duplicated code to set up the IFD/ME/TXE/GBE/ETC. This is the start of creating a common interface for all of them. This also allows us to reduce the chipset dependencies for CBFS_SIZE. Change-Id: Iff08f74305d5ce545b5863915359eeb91eab0208 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10613 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23lippert/frontrunner-af: 64bit fixesStefan Reinauer
Change-Id: Ia764798c8b58497e2b453bd000dd06816c28f98f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10600 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-23lippert/toucan-af: 64bit fixesStefan Reinauer
Change-Id: I9e7f78587b9d6e87cf77757654da9145d4187625 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10599 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-23drop unneeded IRQ_SLOT_COUNTsStefan Reinauer
This is only needed on boards that still provide old style PIRQ tables. Change-Id: Ie299de2937e5b91b7b3e1d1110e40be23c6d9f52 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10508 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-23pcengines/apu1: 64bit fixesStefan Reinauer
Change-Id: Iacad070f43534a8b27a2473a6a2854bc2f6e607a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10598 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-23Kconfig: Move CBFS_SIZE into Mainboard menuMartin Roth
The CBFS size is really mainboard specific, since it really depends on size of the chip on the mainboard, so it makes sense to have it in the mainboard menu along with the ROM-chip size. - Move the CBFS_SIZE definition up in src/kconfig - Move the Mainboard Menu markers out of src/mainboard/kconfig into src/Kconfig so CBFS_SIZE can live in the mainboard menu. - Add a long list setting default values to do what the chipset directories were previously defaulting the values to. This will be trimmed down in a following patch that creates a common set of IFD routines. (Who knew that kconfig supported line wrapping?) - Update the help text. Change-Id: I2b9eb5a6f7d543f57d9f3b9d0aa44a5462e8b718 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10610 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-23veyron_mickey: Apply differences between Brain and Mickeyhuang lin
Mickey: - Does not have power key - Does not have an audio codec(all audio goes thru HDMI) - VCC18_LCD moved to VLDO8 and needs to be turned on (was connected to VSWOUT2 earlier) BUG=none BRANCH=none TEST=Boot from mickey board, and hdmi work normal Change-Id: I88cdc41ce8bb96a6b17aeb7f24b1c5619471b24e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6c966edfa29df1049c469442dc3ad8bf8b4197b1 Original-Change-Id: I3d98203185f52ed751a5d3045a0ee8f9b4dfbc71 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Signed-off-by: huang lin <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/274876 Reviewed-on: http://review.coreboot.org/10630 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-23veyron_danger: Fix #include guardDavid Hendricks
Cosmetic change only. BUG=none BRANCH=none TEST=it compiles Change-Id: Ibe86f624606e365457e03c50c005400d4b335536 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7dfc7002fbf5c100ae65458b33f5aa007dc8d60b Original-Change-Id: Ibc03b028a7918d90cfab9614e800f6df463d86db Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/280851 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10628 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-06-23Move same Kconfigs to northbridge/amd/pi/KconfigWANG Siyuan
Bettong, Lamar and Olivehill Plus have many same Kconfigs. Move them to northbridge/amd/pi/Kconfig. Change-Id: I758d5a09f27eee7a7bd60268a2aaed6f16fd0294 Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10421 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-23AMD Bettong: Add a new AMD FP4 socket mainboardWANG Siyuan
Add a new mainboard based on AMD's Family 15h Model 60h processor. TEST: Bettong can boot Ubuntu 14.10, Windows 7 and Windows 8. Change-Id: Id807369ff0f04ba303383c65ddd1bd512f184e6a Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10420 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-22lenovo/x60: Enable VESA framebuffer mode (native graphics)Francis Rowe
At present, no option exists for "Keep VESA framebuffer", which means that text-mode will be used. Add the appropriate Kconfig option. Change-Id: Iaed07eba6d9288c857f7e7a0b0be1107071e49e5 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/10553 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <gaumless@gmail.com>
2015-06-22lenovo/x60: Enable brightness controls (native graphics)Francis Rowe
On i945 legacy brightness control is enabled by a single bit in BLC_PWM_CTL. It's bit 16 or bit 0 (the other one reverses polarity). Set the bit to enable brightness controls. Change-Id: Id855c4e91fe71fb489739e62fbe99ca22841acd2 Signed-off-by: Francis Rowe <info@gluglug.org.uk> Reviewed-on: http://review.coreboot.org/7048 Reviewed-by: Martin Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-21Remove obsolete EARLY_CONSOLE usageMartin Roth
The EARLY_CONSOLE Kconfig symbol was removed in commit 48713a1b - console: Drop EARLY_CONSOLE option The arm64 and mips directories don't even have early_console.c to include. Change-Id: Idc60ffb2bac2b180f4fdd0adf5c411e1f692a846 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10615 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-17winent/mb6047: initialize hardware monitor CPUTIN configurationJonathan A. Kollasch
Change-Id: Ic36727104e5c2f620f9b2b7b340de8548b467397 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10547 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-17mainboard/bap: Add support for BAP ODE E20XXFabian Kunkel
Adding new board based on AMD Kabini. Most of the code is copied from gizmosphere/gizmo2 Board is developed by BAP - Bruhnspace Advanced Projects: http://www.unibap.com/ (Site is under construction) Special on this board is: -Soldered down memory -SuperIO Fintek F81866D Known bugs: -S3 doesnt work -Serial ports only works for the first boot. Needs power cut. Tested with: -SeaBios as Payload -Linux OS - Lubuntu 14.10 32/64Bit, Kernel 3.19 - 4.1 -Windows 8 64Bit Change-Id: I7e2b306620dd152a9f01ab6ccf2a0a880a068adb Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: http://review.coreboot.org/10288 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-17pcengines/apu1: Add ACPI led, button and GPIO devices.Tobias Diedrich
Provide ACPI devices with devicetree-compatible annotations for the three leds and the button of the APU1, as well as the GPIO driver. This will cause the Linux kernel to automatically load the following modules: leds_gpio (CONFIG_LEDS_GPIO) gpio_keys_polled (CONFIG_KEYBOARD_GPIO_POLLED) gpio_sb8xx (CONFIG_GPIO_SB8XX) See http://events.linuxfoundation.org/sites/events/files/slides/ACPI_vs_DT.pdf and https://lwn.net/Articles/612062/ for some more information on how the PRP0001 HID works. To make this usable a Linux GPIO driver for the AMD chipset is also required, which I am currently working on, but have not submitted upstream yet. Leds have been named after the convention in Documentation/leds/leds-class.txt: LED Device Naming ================= Is currently of the form: "devicename:colour:function" For comparison, on an OpenWRT device: GPIOs 0-21, ath79: gpio-1 (tp-link:green:usb ) out hi gpio-2 (tp-link:green:system) out lo gpio-3 (reset ) in hi gpio-5 (tp-link:green:qss ) out lo gpio-7 (qss ) in hi gpio-9 (tp-link:green:wlan ) out lo gpio-18 (rtl8366rb ) in hi gpio-19 (rtl8366rb ) in hi On the apu1: GPIOs 288-511, platform/PRP0001:00, AMD SB8XX/SB9XX/A5X/A8X GPIO driver: gpio-475 (switch1 ) in hi gpio-477 (apu1:green:led1 ) out hi gpio-478 (apu1:green:led2 ) out hi gpio-479 (apu1:green:led3 ) out hi Change-Id: I956ee92d9d98ef27a83ccb30d314543bd8634f2c Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10540 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-14pcengines/apu1: Remove unused smbus.aslTobias Diedrich
The smbus.asl operation regions prevent the Linux i2c driver (i2c_piix4) for this chipset from claiming the ioport ranges and thus it fails to load. The methods defined in smbus.asl are not used in the DSDT and also don't exist in the DSDT of the vendor firmware. In particular due to the following check in i2c-piix4.c will fail unless acpi_enforce_resources=no is explicitly set on the Linux kernel parameters: if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; Depending on kernel options the only error message printed is ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20150410/utaddress-254) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver However since it does not implement a standard interface there is no native ACPI driver for smbus.asl. Change-Id: Id8401e8b36f0e2412d490a92c20540a04d853125 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: http://review.coreboot.org/10539 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-14winent/mb6047: Remove redundant P-State generationJonathan A. Kollasch
Recently ck804/lpc.c started generating pstates for us. Change-Id: Ie47fff0516e0e838fdcd5084074ce2cabfe7e290 Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/8318 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-14mainboard/lenovo/t400: Fix HDA verbs to match hardware layoutMichał Masłowski
The same values are used on my Lenovo R400 as reported by Francis Rowe from his T400 and T500. TEST: Read /proc/asound/card0/codec#0, see that the jack locations correspond to the board layout, e.g. headphone and microphone connectors are on front of the laptop, not right. Read /sys/class/sound/hwC0D0/init_pin_configs, see that it has the same content as with factory firmware. Change-Id: I60e914ca9fab4bb2c99b4ed9e6d81a0580a88b18 Signed-off-by: Michał Masłowski <mtjm@mtjm.eu> Reviewed-on: http://review.coreboot.org/10431 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-06-14asrock/e350m1: Remove unused file `acpi/smbus.asl`Paul Menzel
Commit 8d80a3fb (ASRock DSDT: Split the ASRock DSDT) creates the file `acpi/smbus.asl` in the board directory, but includes the identical southbridge file in `dsdt.asl`. So, the file is actually unused. Therefore remove it. Change-Id: I26c5a2eaf3822d37da2402da65b278a3ee6d42f0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/10544 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-06-13google/auron: Add mainboardMarc Jones
Add the Google Auron Broadwell Reference Mainboard. It is based on the Google Peppy mainboard. It was merged from the following chromium.org commit: d20a1d1a22d64546a5d8761b18ab29732ec0b848 Change-Id: I716a79e198e91c428bd965fcd03665c2c7067602 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10500 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-12google/jecht: fix MAC address programming when VPD not presentMatt DeVillier
Fix by checking the actual function return value (the search address pointer), rather than the search length value (which isn't guaranteed to be sane or useful). Change-Id: I226c635ddbbc916b02494fcd97df27d141cc2c7f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10516 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-06-12google/panther: fix MAC address programming when VPD not presentMatt DeVillier
Commit 899d13d (cbfs: new API and better program loading) broke panther's lan init when no vpd.bin present from which to read the MAC address. Fix this by checking the validity of the search address pointer, rather than the search length. Change-Id: I8c7ca410d8ce5c5d92242a21c4c2ff4c001a68bd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10509 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-10AMD PI: remove unuseful ACPI codeWANG Siyuan
sata.asl and superio.asl are empty files. Remove them. Change-Id: Icd3e990aa713281e46dcbd8e0847166c77656b1c Signed-off-by: WANG Siyuan <wangsiyuanbuaa@gmail.com> Signed-off-by: WANG Siyuan <SiYuan.Wang@amd.com> Reviewed-on: http://review.coreboot.org/10505 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-10google/auron: Add initial mainboard copy from PeppyMarc Jones
Copy the Peppy directory. No changes. Change-Id: I3fa382eaa40f642df8bc09ab69be67cbe9f3671a Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/10499 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10mainboard/lenovo/t400: Add initial ATPX ACPI implementationTimothy Pearson
Change-Id: I9b86ebec59ccb63db0e1ba61533d162507a22379 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9320 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-06-10google/jecht: Remove whitespace at EOLKyösti Mälkki
Change-Id: I707802befe5b8aaafafc34b17cbdfe795777b6f6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10501 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-10lenovo/t400: Fix buildKyösti Mälkki
Change-Id: I8e8b6e7c123e641749c42a7c706176e285902bb5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10502 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2015-06-10mainboards/lenovo/t400: Remove X200-specific codeTimothy Pearson
Change-Id: Ic3503938b996bbf31f1417923f019a7bc722b9fd Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/10429 Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Tested-by: build bot (Jenkins)
2015-06-10mainboards/lenovo: Copy X200 board to T400 for future expansionTimothy Pearson
Change-Id: If2d48b84fe7bd7b144e96171e54067891e3c4e2e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9316 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10mainboard/lenovo/x200: Add power_on_after_fail NVRAM optionTimothy Pearson
Change-Id: I8e78cbae132566b6ca27e0a68af2656364c82b8f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9332 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-10PCI subsystem: Drop PCI_64BIT_PREF_MEM optionKyösti Mälkki
No board in the tree selects this and it looks like the implementation was done at chipset level while it should be part of PCI subsystem. When enabled, at least AMD K8 and f14, f15tn and f16kb fail build test. Feature of placing prefetchable PCI memory above 4GB may not work if there is any 32-bit only prefetchable PCI BARs in the system. Change-Id: I40ded2c7d6d05f461423721aa5d78a78f9f9ce1e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8705 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-06-09google/jecht: add new mainboardPatrick Georgi
Taken from CrOS, including everything up to commit da4c33913. Adapted to upstream. Change-Id: I095e6726a220200ba17719fc05fcdc521da484e8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10432 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-07macbook21: switch off led before jumping to payloadMono
Mimic vendor BIOS in switching off the led once coreboot has booted successfully. Currently the led behavior is inconsistent. The led turns on during poweron and stays on forever. When entering S3 and during S3 it blinks and turns off after wake from S3. The behavior associated with S3 is the same under vendor BIOS and under coreboot. Switching off the led before jumping to the payload makes the led behavior consistent within coreboot before S3 and after wake from S3 and it makes the led behavior consistent to vendor BIOS. Change-Id: I0dec10b842b83dfc8054cd56d2750b724c4e8576 Signed-off-by: Axel Holewa <mono-for-coreboot@donderklumpen.de> Reviewed-on: http://review.coreboot.org/10454 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2015-06-07veyron_mickey: Update board name to uppercaseMartin Roth
Change the Kconfig board name symbol to uppercase to match other symbols and to match the capitalization in the Kconfig file where it's used in an expression. Change-Id: I04ccb57cc15a6d7430f8d04136beb8384caa6c04 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10440 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-06-07mainboard/ti/beaglebone: Remove unused Kconfig symbolsMartin Roth
Cleaning up unused Kconfig symbols. These symbols are not used anywhere in the coreboot tree as far as I can tell. Change-Id: I4d0b9512a784083dd134a8706b3bd8eca2a3a909 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10439 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2015-06-05device_ops: add device_t argument to write_acpi_tablesAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I1ba4bfa0ac36a09a82b108249158c80c50f9f5fd Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9599 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_fill_ssdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I7fca8c3fa15c1be672e50e4422d7ac8e4aaa1e36 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9598 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05device_ops: add device_t argument to acpi_inject_dsdt_generatorAlexander Couzens
`device_t device` is missing as argument. Every device_op function should have a `device_t device` argument. Change-Id: I3fc8e0339fa46fe92cc39f7afa896ffd38c26c8d Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: http://review.coreboot.org/9597 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-06-05google/veyron_mickey: Add new mainboardDavid Hendricks
This simply copies veyron_brain to veyron_mickey and makes the minimal set of changes (s/brain/mickey) to make it compile. The follow-up patch will take into account board differences. BUG=none BRANCH=none TEST="emerge-veyron_mickey coreboot" doesn't fail Change-Id: I7d029b36d2fb865446490b896117ade632325a52 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 34f6b391290f99caf517d7e98c31c89dc57309be Original-Change-Id: I03a2b80eb441384f363910467180479521765431 Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/271360 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10408 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-06-05google/veyron_romy: Add new mainboardDavid Hendricks
This simply copies veyron_brain to veyron_romy and makes the minimal set of changes (s/brain/romy) to make it compile. The follow-up patch will take into account board differences. BUG=none BRANCH=none TEST="emerge-veyron_romy coreboot" doesn't fail Change-Id: Ice1bc012bddd6c51b43944747e0df3ffa34207fa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0ab849178b69cf2323f126e503bd61080048240a Original-Change-Id: I0516ce94fd3c6a38170fae221a070f503ccfaf0f Original-Signed-off-by: David Hendricks <dhendrix@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/271345 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: http://review.coreboot.org/10407 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2015-06-05mainboard/lenovo/{t430s,t420s,t520,t530,x220}: Add TPM 1.2 mainboard supportPhilipp Deppenwiese
Every Lenovo Thinkpad includes a Trusted Platform Module, so we can enable it for the sandy-/ivybridge platforms. Change-Id: Icda443ba88c2a49a0033014ce7710dd607fa15dc Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: http://review.coreboot.org/10411 Tested-by: build bot (Jenkins) Reviewed-by: Nicolas Reinecke <nr@das-labor.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8366 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-06-05AMD K8: Move SB_HT_CHAIN_ON_BUS0 default 0Kyösti Mälkki
Define the default value under northbridge. The list of boards this patchset touches will change to use SB_HT_CHAIN_ON_BUS0 with follow-up patch. Based on code analysis, these boards already scan system bus as the first (active) HT chain, so it is placed as bus 0 even when this option was not explicitly selected. Change-Id: I5a00d6372cb89151940aeee517ea613398825c78 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8353 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 14:10:21 +0000