summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2015-01-03ARMv7: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
2015-01-03storm: enable early consoleVadim Bendebury
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
2015-01-03lenovo/t420s: Add new port.Nicolas Reinecke
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
2015-01-01mainboard/lenovo/t530/Kconfig: Enable VMX by defaultEdward O'Callaghan
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
2014-12-31rambi: Unconditionally clear the EC recovery requestSheng-Liang Song
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
2014-12-30nyan_blaze: Enable USB port2Neil Chen
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
2014-12-30intel CAR: Fix DCACHE_RAM_BASE for old socketsKyösti Mälkki
2014-12-30mainboard/lenovo/t530/Kconfig: No Super I/O on this boardEdward O'Callaghan
2014-12-26blaze: change ramcode 0001/0010 to use 792MHz bctJerry Wang
2014-12-26nyan*: Detect watchdog resets and reset the whole machine.Gabe Black
2014-12-26blaze: change ramcode 0000 to use 792MHz bctKen Chang
2014-12-26nyan*: I2C: Implement bus clear when 'ARB_LOST' error occursTom Warren
2014-12-22hp/pavilion_m6_1035dx: Enable IOMMUAlexandru Gagniuc
2014-12-20AGESA fam15tn fam15rl fam16kb: Add OemInitMid()Kyösti Mälkki
2014-12-20AGESA: Add OemCustomize hooks structureKyösti Mälkki
2014-12-20AGESA: Ignore error in OemCustomizeInitEarly()Kyösti Mälkki
2014-12-20AGESA fam14: Add amd_initenv()Kyösti Mälkki
2014-12-20AGESA: Add amd_initcpuio() and amd_initmmio()Kyösti Mälkki
2014-12-19qemu-armv7: Trivial style fixesDavid Hendricks
2014-12-19nyan*: Clear VDDIO_SDMMC3 to reset SD card reader.Hung-Te Lin
2014-12-19nyan*: Disable SD card reader power gpio.Hung-Te Lin
2014-12-19nyan*: Add fast link training functionsJimmy Zhang
2014-12-19gigabyte/ga-b75m-d3h: Drop redundant EARLY_CBMEM_INITKyösti Mälkki
2014-12-19beaglebone: use new arm bootblock infrastructureAlexander Couzens
2014-12-19mainboard: Strip out some dead includesEdward O'Callaghan
2014-12-19fsp_baytrail: Remove GPIO_NC1 #defineMartin Roth
2014-12-18amd/olivehillplus/romstage.c: remove not useful variable 'halt'WANG Siyuan
2014-12-18i82371eb & qemu: Move to per-device ACPI.Vladimir Serbinenko
2014-12-18Drop VIA Epia-NStefan Reinauer
2014-12-18Drop VIA Epia-M series of boardsStefan Reinauer
2014-12-18Drop VIA Epia mainboardStefan Reinauer
2014-12-18Drop Intel E7520 and E7525 and related boardsStefan Reinauer
2014-12-18intel/truxton: Un-romcc-ify boardStefan Reinauer
2014-12-17rambi: align gpu pipea settings with the VBIOSAaron Durbin
2014-12-17nyan*: cbmem: Move the call to cbmemc_reinit.Gabe Black
2014-12-17tegra124: modify panel init sequenceKen Chang
2014-12-17nyan*: enable CLAMP_INPUTSKen Chang
2014-12-17nyan*: Add eventlog supportDavid Hendricks
2014-12-17intel/minnowmax: Determine board type from GPIOsMartin Roth
2014-12-16blaze: Change samsung RAMCODE to samsung-2GB-204/samsung-4GB-204Neil Chen
2014-12-16Drop SC520 and related boardsStefan Reinauer
2014-12-16Drop GX1, CS5330 and related boardsStefan Reinauer
2014-12-16CBMEM console: Fix boards with BROKEN_CAR_MIGRATEKyösti Mälkki
2014-12-16Intel FSP: Move to DYNAMIC_CBMEMKyösti Mälkki
2014-12-16i2c: Replace the i2c API.Gabe Black
2014-12-15tegra124: Setup clock PLLD by approximating display panel pixel clock.Hung-Te Lin
2014-12-15nyan*: pinmux: fix PWM1/2 conflictsTom Warren
2014-12-15tegra124: set safe values for href_to_sync and vref_to_syncJimmy Zhang
2014-12-15nyan: Enable the cbmem console on nyan and allocate space for it in SRAM.Gabe Black
2014-12-15nyans: prepare for vboot verification of ramstageAaron Durbin
2014-12-15blaze: Change RAMCODE 0010 to hynix-2GB-792MHzNeil Chen
2014-12-15nyan*: Fix unexpected symbol (CR) when converting DOS-formatted BCT config.Neil Chen
2014-12-15blaze: set 8 default BCT as hynix-2GB-204MHzNeil Chen
2014-12-15nyan*: Reduce the EC SPI bus frequency to 3 MHz.Gabe Black
2014-12-13AMD AGESA boards: Prevent passing duplicate obj names to arScott Duplichan
2014-12-10AMD 00730F01: Topology changes required by KaveriPI v1.1.0.7 updateBruce Griffith
2014-12-09spi: Factor EC protocol details out of the SPI drivers.Gabe Black
2014-12-09gizmosphere/gizmo2: Add the gizmo2 IRQ routingDave Frodin
2014-12-09gizmosphere/gizmo2: Changes to make it gizmo2Dave Frodin
2014-12-09mainboard/siemens/sitemp_g1p1/mainboard.c: Fix implicit conversionEdward O'Callaghan
2014-12-09mainboard/{iwill,amd/serenget_*}: Fix ptr discards const qualifierEdward O'Callaghan
2014-12-09fsp platfoms: add prototype & consolidate main entry-pointMartin Roth
2014-12-09mainboard/gizmosphere/gizmo2: Start adding new mainboardDave Frodin
2014-12-08mainboard: Fix correct index variable usage in double loop constructEdward O'Callaghan
2014-12-08mainboard/siemens/sitemp_g1p1/mainboard.c: Remove unicode in stringEdward O'Callaghan
2014-12-07mainboard/google/samus: Fix usage of GNU field designator extEdward O'Callaghan
2014-12-07Kconfig: Remove ACPI_SSDTX_NUM.Vladimir Serbinenko
2014-12-07ga-b75m-d3h: Remove duplicate sata_port_mapVladimir Serbinenko
2014-12-07hp/pavilion_m6_1035dx: select NO_UART_ON_SUPERIO in KconfigAlexandru Gagniuc
2014-12-07x200/devicetree: Remove extraneous eventc.Vladimir Serbinenko
2014-12-07x200/romstage: Add missing include.Vladimir Serbinenko
2014-12-07lenovo: Remove duplicate devicetree.cb eventc entry.Vladimir Serbinenko
2014-12-06kontron/986lcd-m: Fix PCI interrupt routing.Vladimir Serbinenko
2014-12-06Remove IRQ_SLOT_COUNT on all boards without PIRQ table.Vladimir Serbinenko
2014-12-06vendorcode/amd/agesa: Make Porting.h common between familiesEdward O'Callaghan
2014-12-06mainboard/lenovo/g505s/Kconfig: Has no SuperIOEdward O'Callaghan
2014-12-06mainboard/lenovo/g505s: Build in EC ASL support for KBD/AUX portsEdward O'Callaghan
2014-12-06mainboard/lenovo/g505s: Toggle on IOMMU supportEdward O'Callaghan
2014-12-06mainboard/*/acpi/superio.asl: Use non-local inclusion syntaxEdward O'Callaghan
2014-12-06mainboard/lenovo/g505s/buildOpts.c: Trivial variable renameEdward O'Callaghan
2014-12-06fsp_baytrail: Allow selection of USB controller by get_optionMartin Roth
2014-12-06intel/minnowmax: Update devicetreeMartin Roth
2014-12-05minnowmax board: Update KconfigMartin Roth
2014-12-05fsp_baytrail: remove register option for TSEG sizeMartin Roth
2014-12-05lenovo/g505s: Kconfig: Remove unused PIRQ legacy bitsEdward O'Callaghan
2014-12-04RISCV: get RISCV to build againRonald G. Minnich
2014-12-04via/epia-n: Switch to per-device ACPIVladimir Serbinenko
2014-12-03i945: Consolidate acpi/platform.aslVladimir Serbinenko
2014-12-03i82801gx: Enable upper CMOS in bootblock.Vladimir Serbinenko
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 06:53:09 +0000