summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2015-11-12mainboard/asus/kgpe-d16: Add missing IRQ routing for PIKE cardTimothy Pearson
2015-11-11mainboard/asus/kgpe-d16: Add maximum_p_state_limit CMOS optionTimothy Pearson
2015-11-11mainboard/asus/kgpe-d16: Set SP5100 subtypeTimothy Pearson
2015-11-11google/veyron_emile: adjust to the spec of emileZhengShunQian
2015-11-11intel/kunimitsu: Enable wake from touch pad.Archana Patni
2015-11-11google/veyron_emile: Add new board of veyronZhengShunQian
2015-11-11google/chell: Add chromeos.c to verstageDuncan Laurie
2015-11-11google/chell: Disable Deep S3Duncan Laurie
2015-11-11google/chell: Add SPD for new memory typeDuncan Laurie
2015-11-11intel/skylake: mainboards: Add MAINBOARD_FAMILY kconfig entryDuncan Laurie
2015-11-11google/chell: Fix USB port assignment againDuncan Laurie
2015-11-11mainboard/asus/kgpe-d16: Add SATA AHCI mode CMOS optionTimothy Pearson
2015-11-11cpu/amd: Add CC6 supportTimothy Pearson
2015-11-11asus/k8v-x: Add more subsystem IDs to device treeUrja Rannikko
2015-11-11asus/k8v-x: Add PIRQ tables to init PCI IRQ configUrja Rannikko
2015-11-11fsp_baytrail: Add macros for legacy GPIO output set upWerner Zeh
2015-11-11mainboard/asus/kgpe-d16: Enable CC6Timothy Pearson
2015-11-11amd/amdmct/mct_ddr3: Use training values from previous boot if possibleTimothy Pearson
2015-11-11mainboard/asus/kgpe-d16: Set correct supported SATA port countTimothy Pearson
2015-11-11southbridge/amd/sb700: Indicate iSATA/eSATA port typeTimothy Pearson
2015-11-11mainboard/asus/kgpe-d16: Properly initialize SB700 SATA PHYsTimothy Pearson
2015-11-10[REMOVAL] tyan/s2875Stefan Reinauer
2015-11-10[REMOVAL] tyan/s4882Stefan Reinauer
2015-11-10[REMOVAL] tyan/s4880Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2892Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2891Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2885Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2882Stefan Reinauer
2015-11-10AMD Bettong: Add a special case for SPD address of rev FZheng Bao
2015-11-10[REMOVAL] tyan/s2895Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2880Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2881Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2850Stefan Reinauer
2015-11-10[REMOVAL] tyan/s2735Stefan Reinauer
2015-11-10[REMOVAL] iwill/dk8s2Stefan Reinauer
2015-11-10[REMOVAL] digitallogic/adl855pcStefan Reinauer
2015-11-10[REMOVAL] iwill/dk8xStefan Reinauer
2015-11-10[REMOVAL] newisys/khepriStefan Reinauer
2015-11-10[REMOVAL] ibm/e325 + ibm/e326Stefan Reinauer
2015-11-10[REMOVAL] arima/hdamaStefan Reinauer
2015-11-10mainboard/**/irq_tables.c: Remove reference to getpirPatrick Georgi
2015-11-10google/{chell,lars}: Enable Fan control supportdavid
2015-11-10AMD/Bettong: Set on-board eMMC as SD 2.0zbao
2015-11-10AMD/Bettong: Memory configuration for DDR3 and DDR4Zheng Bao
2015-11-10AMD/Bettong: add function to read board versionZheng Bao
2015-11-10asus/kgpe-d16: fix DIMMSetVoltagesFelix Held
2015-11-10sunw/ultra40m2: initialize hardware monitor and fan controlJonathan A. Kollasch
2015-11-10mainboard: Add Sun Ultra 40 M2 portJonathan A. Kollasch
2015-11-10mainboard: copy nvidia/l1_2pvv to sunw/ultra40m2 and renameJonathan A. Kollasch
2015-11-10mainboard/lenovo/t400: Add initial hybrid graphics supportTimothy Pearson
2015-11-10asus/k8v-x: set superio ROM ctrl reg to enable writesUrja Rannikko
2015-11-10mainboard: Remove empty mainboard.c filesPaul Menzel
2015-11-10mainboard/intel: Add Stargo2Marc Jones
2015-11-09mainboard/asus/kgpe-d16: Add initial Family 15h CPU supportTimothy Pearson
2015-11-07arm64: Remove cpu intialization through device-treeFurquan Shaikh
2015-11-07arm64: Remove SMP supportFurquan Shaikh
2015-11-07arm64: remove spin table supportAaron Durbin
2015-11-06AGESA BiosCallouts: Remove castKyösti Mälkki
2015-11-06AMD Bettong: Enable S4 feature for Windows 7zbao
2015-11-06AMD bettong: Fix the interrupt routing.zbao
2015-11-05intel/i945: Consolidate MADT handlingVladimir Serbinenko
2015-11-05Kconfig: Remove obsolete Kconfig symbols from google/intel boardsMartin Roth
2015-11-05google/chell: Fix USB port assignmentDuncan Laurie
2015-11-05intel/kunimitsu, google/glados: Enable Fan control supportSumeet Pawnikar
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
2015-11-04mainboard/asus: Increase reboot count on boards with recovery jumperTimothy Pearson
2015-11-02cpu/amd: Add initial AMD Family 15h supportTimothy Pearson
2015-11-02cpu/amd: Move model_10xxx to family_10h-family_15hTimothy Pearson
2015-11-02mainboard/asus/kgpe-d16: Set DDR3 memory voltage based on SPD dataTimothy Pearson
2015-11-02amd/olivehillplus: Tidy up devicetreeKyösti Mälkki
2015-11-02asrock/e350m1: Add ACPI S3 supportKyösti Mälkki
2015-11-02asrock/e350m1: Match super-io GPIO configuration with vendorKyösti Mälkki
2015-11-02mainboard/asus/kfsn4-dre_k8: Fix ramstage using Family 10h structsTimothy Pearson
2015-10-31mainboard/asus/kgpe-d16: Add initial Suspend to RAM (S3) supportTimothy Pearson
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
2015-10-31mainboard/asus/kfsn4-dre_k8: Fix broken dual CPU package supportTimothy Pearson
2015-10-30AMD mainboards: Fix 64bit BiosCallOuts.cStefan Reinauer
2015-10-30cpu/amd: Fix cbtypes.h to match UINTN conventionStefan Reinauer
2015-10-30mainboard 64bit fixesStefan Reinauer
2015-10-30mainboard/asus/m2n-e|msi/ms9282: Clean up FIDVID mistakesTimothy Pearson
2015-10-30mainboard: Add initial K8-compatible version of the KFSN4-DRETimothy Pearson
2015-10-29mainboard/asus/kgpe-d16: Add nvram option to enable/disable IEEE 1394Timothy Pearson
2015-10-29mainboard/asus/kgpe-d16: Properly configure SR5690 southbridge PIKE slotTimothy Pearson
2015-10-29pcengines/apu1: adapt comments in devicetree to boardFelix Held
2015-10-29mainboard: Convert #ifdef to IS_ENABLED in get_bus_conf.cTimothy Pearson
2015-10-28google/glados: Set the type-c flex port to max USB2 settingsDuncan Laurie
2015-10-28google/chell: Set DPTF critical temperature to 99CDuncan Laurie
2015-10-28google/lars: Add new mainboarddavid
2015-10-28google/lars: Copy from intel/kunimitsudavid
2015-10-28mainboard/asus/kgpe-d16: Add initial support for the KGPE-D16Timothy Pearson
2015-10-27intel/skylake: Clean up USB configuration in devicetreeDuncan Laurie
2015-10-27intel/kunimitsu: Add device properties for Nuvoton codeYong Zhi
2015-10-27intel/kunimitsu: csme: program sml gpios for csme power gatingArchana Patni
2015-10-27google/glados: csme: program sml gpios for csme power gatingArchana Patni
2015-10-27google/chell: fix hynix spd dataAaron Durbin
2015-10-27google/chell: Add new mainboard for chellDuncan Laurie
2015-10-27google/chell: copy glados to chellDuncan Laurie
2015-10-27google/glados: Add USB phy settings and update enabled optionsDuncan Laurie
2015-10-27google/glados: Enable TPM PIRQDuncan Laurie
2015-10-27intel/kunimitsu: USB Phy settings and Skip UART2 init in FSPRizwan Qureshi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 05:51:03 +0000