| Age | Commit message (Collapse) | Author |
|---|
|
Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both
backwards, and was causing the system to fail to enter sleep states
because the event was always asserted.
BUG=b:208937710
TEST=only release switch can wake system.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The stryke project/mainboard never ended up being built and was
cancelled early on, therefore remove it from the tree.
Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Add WiFi SAR table for felwinter.
BUG=b:206901900
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be
same as module nvm file by vendor provided or meet the Intel nvm
calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Samsung K4U6E3S4AA-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The Hermes mainboard is used in different system configurations. The
current VBT for Poseidon systems is unsuitable for Avalanche systems
because display ports are connected differently.
Add a new field in the BMC config EEPROM layout and use it to choose
the correct VBT for every system configuration.
Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The original RCOMP resistor and target values only apply to ULT CPUs and
do not make sense for the CFL-S CPUs Hermes uses. Fix the RCOMP settings
and the associated comments.
Tested, still boots.
Change-Id: I015797c58c914c6581d472e6d70d2dd7bad2b14f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Define a new field in the board config EEPROM layout for port B Vref.
Write port B Vref settings to unused non-volatile NID 0x12 instead of
NID 0x18, the actual port B NID. Because per-port Vref settings don't
persist after codec resets, a custom Realtek driver (ab)uses NID 0x12
to restore port B Vref after resetting the codec.
Change-Id: Iaa11ba9c74f643e94046d4983fbce65dbedd1025
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the pin configs for the front panel jacks.
Change-Id: I3760f0a25e964cf0eba99d180fd6f3e8488af868
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use lowercase for hex numbers, sort includes alphabetically and avoid
relying on indirect inclusion. Include `<intelblocks/gpio.h>` instead
of `<intelblocks/gpio_defs.h>`, as the latter implcitly relies on one
definition from `<soc/gpio.h>`. Also drop useless dsdt.asl and fix up
the indentation of some includes.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I3aeb9a644cf33cb4b1987174f40ef0fc7daccfa9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There's no need to use a variant structure here. Only one variant is
used, and revision-specific differences are handled at run-time, and
it's unlikely that another variant will ever exist.
Reorganize the mainboard code to get rid of the variant structure.
Change-Id: I1543f5b76975b0e7183fbb759e9bae5c34151d06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I943d0e2a91778df306f323e2b889cd4e928e0c2b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
EN_SPKR GPIO is used as a multiplexer select signal between RAM_ID
straps and Developer Mode Beep signals. During boot up it is LOW and
selects RAM_ID straps. When the system enters OS, it is driven HIGH and
selects DEV BEEP signals. Since in some boards, the GPIO chosen is in S5
domain it does not reset until the system enters mechanical off (G3)
state. On scenarios where the power button is pressed when the system is
in S5, incorrect RAM_ID strap is being read because the EN_SPKR is still
selecting DEV BEEP signal. This causes boot up failures. Fix this by
configuring the EN_SPKR GPIO (in S5 domain) explicitly in PSP verstage.
BUG=b:204450368
TEST=Build and boot to OS in Guybrush. Perform suspend-resume cycle
followed by a S5 -> S0 boot cycle for 2 iterations successfully.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I9a52a167da9c7040731da5d355ec345fd9b13762
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59813
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the LAN device in devicetree and add Kconfig item
RT8168_GET_MAC_FROM_VPD to support programming MAC address.
BUG=b:193750191
BRANCH=None
TEST=Use 'vpd -s ethernet_mac0=...' to write MAC to VPD.
Use 'ifconfig' to check if the MAC written successfully.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Ibb95b02fd6d61621ef46db4d63b48456a0a72732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207625007
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Change-Id: I20cdd1650d1ca774065a6c051006dfd0b7a3fd79
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the beadrix variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:204882915
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_BEADRIX
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
In next build phase, primus will exchange i2c port for touchscreen and cr50.
BUG=b:207834727
TEST=build pass
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: Ief1b156b866a9aaa2919f0e209b6439c7019e939
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207070967
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ice522260f288b165ae66dddc3e1979e806b53f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the taniks variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:207402720
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TANIKS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I797051f93019ccf72f1007d9c0b98cfb071717b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Set the PL1, PL2 and PL4 according to issue b:193864533 comment#55
and Intel's doc #626774.
2. Set PsysPL2 and PsysPmax according to the conclusion in issue
b:193864533 comment#23 and comment#29.
BUG=b:193864533
BRANCH=none
TEST=Compare the measured power from adapter with the value of 'psys'
from the command 'dump_intel_rapl_consumption'.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9261902b8c892d0b866f326b24988039c1d30b56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Copy function variant_update_power_limits from brya to set power limits.
Add function variant_update_psys_power_limits and copy the algorithm
from puff. Add structure system_power_limits and psys_config to define
and configure the psys power limits.
BUG=b:193864533
BRANCH=none
TEST=Build pass
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I183017068e9c78acb9fa7073c53593d304ba9248
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
DVT schematic will exchange TPM_I2C3 to TPM_I2C1, that may need swap
TPM I2C with touchscreen I2C to avoid TPM I2C fall on muxed ISH I2C,
need change I2C map, sch amd GPIO map. b/196293623
BUG=b:207613972
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I26d059a7ea5a3fdf00de260214c00d3bba9aa7f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59580
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow the latest HW schematic change.
BUG=b:208556921
TEST=build pass
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ic05843487ea540b8cd9a50d5f73803905fd80d49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Keeping the PM timer enabled will disqualify an ADL system from entering
S0i3, and will also cause an increase in power during suspend states.
The PM timer is not required for brya boards, therefore disabling it.
Fixes: 0e905801 (soc/intel: transition full control over PM Timer from
FSP to coreboot)
BUG=b:206922066
TEST=Boot gimble to OS and verify S0i3 counter incrementing after
exiting S0ix suspend states.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I8005dacd732c033980ccc479375ff5b06df8dac1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59790
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Alder Lake code currently supports the PCH-M and PCH-P types, which
have some differences (so far, only the amount of PCIe I/O). Mainboards
can use the `SOC_INTEL_ALDERLAKE_PCH_M` Kconfig option to specify which
PCH type they use: select the option to choose PCH-M, do not select the
option to choose PCH-P. While this works, it can be confusing once more
PCH types are added.
Introduce the `SOC_INTEL_ALDERLAKE_PCH_P` Kconfig option so that boards
have to explicitly choose a PCH type. Also, use this option to restrict
the PCH-P defaults for PCH-dependent settings to avoid unintended reuse
of the PCH-P defaults when adding a new PCH type. To make sure only one
PCH type is selected, add some preprocessor in `bootblock.h` to provoke
a build-time error if this requirement is not met. Kconfig doesn't seem
to have a mechanism to describe sets of mutually-exclusive bool options
that allows said options to be selected (a `choice` block doesn't allow
its elements to be selected). Finally, adapt the ADL boards accordingly.
Change-Id: I7deca820e08ce2b5a220f3c97a511a4f3464a976
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This area is used for storing AP RO verification information.
BRANCH=none
BUG=b:141191727
TEST=built a guybrush firmware image and verified that the RO_GSCVD
area was indeed added:
$ dump_fmap /build/guybrush/firmware/image-guybrush.bin | \
grep -B3 RO_GSCVD
area: 25
area_offset: 0x00808000
area_size: 0x00002000 (8192)
area_name: RO_GSCVD
$
- verified that guybrush device boots fine with the new image.
Change-Id: Ifa24d5a6271a8bcbf737d4580ec85b9cfdd9af01
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57864
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this.
Patch for 5.10 kernel can be found at:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3289984
BUG=b:206850071
TEST=dump SSDT, see _HID instead of _ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If988ca94b6c70d08a7b07cc9f6bbb077fac84e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59731
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some herobrine variants have USB hub powered by discrete LDO that is
controlled by USB_HUB_LDO_EN gpio. Assert the GPIO on boot.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ia94e046f9eb0d3ce593f3445e0203a7391c14de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Initialize by calling `setup_usb_host0()` from SOC code
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ic378352a97e4f3ed89089f1f7545f8ebb172b1f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
BlueTooth disappeared after disabled USB2 port 9,
so we need to re-enable it.
BUG=none
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I7971509d7428562c80e781339ead059a189cea13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:207307897
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Change-Id: Ib1682cdafe1b6ed7cc0cf23624f83d2e5bbfb92e
Signed-off-by: Wizard Shen <shenhu5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
|
|
Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add common USB driver for qualcomm soc sc7180 and sc7280.
This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7180 and
sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: I1013ded22855286220cfa747cb25418070fe85a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
There are no quad-core CPU models with fam14, \_SB.C002 and .C003 get
removed from ASL.
Change-Id: I96df5b3f93c2dd6a05d5693069b991ca01f71d73
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia65b1873f1d184b8b8c64a61a26820ae0900437d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There was a duplicate PCI 0:14.4 device in ASL. Only
keep one.
There are no PCI devices 0:2.0 or 0:3.0 on fam14 northbridge
for graphics. There are no PCIe root ports 0:9.0 or 0:a.0.
Change-Id: Ifa8abb851f8ae4863b2c6d52224d287fd272048d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The section is the same and at root scope.
Change-Id: I3b3ff2fddc7d4db09903151bcb92e3e1b5dc7d69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Dumped using inteltool from the Dell BIOS version A30.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifdc41a1e6627b68813fb264aed7e30df58fc6d54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59525
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no support for SD card on Corsola reference board, so
we add a configuration to disable SD card initialization to
prevent setting GPIOs in a mistaken way.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia05fd046335c6ce6f9198ddbb7cbda2afc6ae3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
On Chromebooks the RAM code is implemented by the resistor straps
that we can read and decode from ADC. For Corsola the RAM code can be
read from ADC channel 2 and 3.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I485c32dec7b425b604b4063d742a0e37d3961513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Raise little CPU to 2GHz at romstage.
TEST=check little core cpu frequency is 2GHz
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add VPROC12/VSRAM_PROC12 to adjust power for raising little
CPU frequency.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I59b4627220022a51a116716036a8ba0048039508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Configure Chromebook specific GPIOs, including EC_AP_INT,
EC_IN_RW, GSC_AP_INT, EN_SPK, GPIO_AP, and GPIO_RESET.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I76bde75788889111c0a051eed731dadc9898c0e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Kano EVT will exchange i2c port for touchscreen and cr50.
BUG=b:195853169
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In different sku, some unused GPIO pins are processed by NC for power
consumption.
BUG=b:196790249
TEST=emerge-brya coreboot chromeos-bootimage and check power
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enabling crashlog helps partners to debug hang issues efficiently.
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in
depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble
Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
At present the default ROM for for QEMU is too small for U-Boot to fit.
Add a condition to catch this and expand it to a 1MB ROM. This allows
booting U-Boot under emulation.
It also matches the size used by other emulation boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added fw config probe for MX98360A.
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I2452b752ce58a5d0f1008cf187fb79ace6c4285f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The DPTF parameters were verified by the thermal team.
BUG=b:207463762
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I634d6d98c28e75ad41488921df6b8e836e253ff1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
- Add 4 TEMP_SENSORs
- Configure granularity of power limits
BUG=b:200836803
TEST=USE="project_primus emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: Id4d8dbe678b7f0870aeffa0a0118e65de9d5c22d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Update thermal setting from thermal team.
BUG=b:205648035
TEST=build and verified by thermal team.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If5082462b79c88ecf510f7a552381c792604366e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Set power limits for kano based on CPU SKUs.
BUG=b:205648035
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I25cf9be68f8981d8307b4c15ab9f65b59058fb19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Gimble.
BUG=b:206014046
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ifc490e6e081b6a8534656417603d2916c3edcb05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59579
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It was already enabled on T520 and L520, but disabled on X220, T420 and
T420s.
On X220, it was disabled by commit 0793afe9 (mb/lenovo/x220: disable ME).
I can't reproduce those issues today on linux 4.4 and linux 5.13.
Also, it breaks the me_disable feature, we already have a Kconfig option
to hide MEI in case of errors, and it will be hidden on disabled,
recovery, firmware update paths anyway.
Change-Id: I8e6d067a9c728443d00df541ac7a9a878df58b6a
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
The Prodrive Hermes mainboard has four i211 Ethernet NICs and an i210
Ethernet NIC, but their numbering isn't consistent with the PCIe root
port function numbers. With only a M.2 SSD plugged in, Linux uses the
following names:
PHY 0 ---> enp6s0
PHY 1 ---> enp4s0
PHY 2 ---> enp3s0
PHY 3 ---> enp1s0
PHY 4 ---> enp2s0
These names change after adding or removing PCIe devices in slots
connected to root ports that get enumerated before the NICs' root
ports, because the assignment of secondary bus numbers depends on
the enumeration order. Because of this, the "predictable" network
interface names are not at all predictable, which is awful.
To avoid this, describe the NICs using SMBIOS Type41 entries with the
correct instance numbers. With this patch, Linux uses these names:
PHY 0 ---> eno0
PHY 1 ---> eno1
PHY 2 ---> eno2
PHY 3 ---> eno3
PHY 4 ---> eno4
No matter what PCIe devices are present, these names don't change.
Change-Id: I7a527298f84172f9135006083ad7e748dcc27911
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58628
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCI_EXP_EN, PME_EN and PME_B0_EN GPEs used for PCI devices.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I4480921a294f35a0dfe1e5acd90d55f6fb4c85b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie1b270d49660fd60b6a91194167467c4453e1b6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Select the EC option on boards with dGPUs to report GPU temperature and
fan data.
Tested on system76/oryp6. The GPU fan speed is reported in sensors when
the system is under load.
system76_acpi-acpi-0
Adapter: ACPI interface
CPU fan: 1985 RPM
GPU fan: 2348 RPM
CPU temp: +68.0°C
GPU temp: +0.0°C
Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H,
and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER.
The HECI device must be enabled in devicetree for switching modes to
function correctly.
Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
With cr50 fw 0.3.22 or older version, it needs to disable autonomous
GPIO power management and then can update cr50 fw successfully.
BUG=b:202246591
TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage.
Change-Id: Idc01ebb4d3ef990f24f18bef5424b7d6ba683d49
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
libcbfs has a workaround to avoid writing to ROM areas:
/* Hacky way to not load programs over read only media. The stages
* that would hit this path initialize themselves. */
if ((ENV_BOOTBLOCK || ENV_SEPARATE_VERSTAGE) &&
!CONFIG(NO_XIP_EARLY_STAGES) && CONFIG(BOOT_DEVICE_MEMORY_MAPPED)) {
This workaround is not triggered in QEMU, because
BOOT_DEVICE_MEMORY_MAPPED is only selected for SPI boot devices. This
results in confusing (to the VMM developer) writes to read-only
memory.
As far as I can tell, this issue is weird but harmless, because the
code does memcpy to ROM with source == destination. The concensus in
the mailing list thread [1] was that it's worthwhile to be fixed
regardless.
[1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/KDI6YQCPXSQF4NDUAAC7TIXQKSZ6T4X7/
Change-Id: I5cefbc31f917021236105f7dc969118d612ac399
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
change TP_EN pin to GPIO_67 for quackingstick
BUG=b:206862167
BRANCH=trogdor
TEST=make
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I7cc1083111f46cd3489cbbb9e579c34dc972b0b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
The "internal audio connection" setting is actually about the front
panel audio. Rename functions and variables to reflect this.
Change-Id: I1be8f68ac3e8b91bc4983dc06daa37afb7bdf926
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
ADL-M has its own set of VBT files to pick during execution,
this will avoid any conflict with other ADL variants.
VBT files added at chrome-internal:4138272
BUG=None
TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ibbf3f11c9277f5dcb3e12f9020f54ec843444c3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Add Kconfig item ENABLE_TCSS_DISPLAY_DETECTION.
TEST=Build with the VBT provided in issue b:199490251. Check the dev screen in bios-stage.
BUG=b:199490251, b:206014054
Signed-off-by: Adam Liu <adam.liu@quanta.corp-partner.google.com>
Change-Id: I5f34be030a6d819a0e93a2d479c4ff41bb14cfe2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Brya schematic will swap TPM I2C with touchscreen I2C,
so move into variant level.
BUG=b:195853169
TEST=build pass.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ie5276527da135ec15045a81985ae006722871b0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Added fw_config_probe method to distinguish different audio codecs to
facilitate the use of different topology files by the OS.
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I0d5b95e89154b2cb6b371f24cc1b151c23ff642f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC5682I-VS will use in next build.
BUG=b:194367025
TEST=none.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I34d736fe1c39860443dac07435a21ccd0ee2f21c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tested using MrChromeBox's `uefipayload_202107` branch:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/starbook-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I090971a9e8d2be5b08be886d00d304607304b645
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56088
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Acoustic noise mitigation for bugzzy and set slew rate to 1/8
which is calibrated value for the board.
BUG=b:207046230
BRANCH=dedede
TEST=build firmware to UPD and Acoustic noise test
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Id249a143efb9bce70f48fb466fed42e766a10937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
If a USB_MUX_EVENT happens while the AP is in S3 during powerdown
transtion (S0->S3->S5), this will cause the device to boot again after
it has finished sequencing down to S5. Since S3 is not POR for ChromeOS
devices anymore, change this event to wake from S3 and S0ix to just
S0ix.
BUG=b:206867635
TEST=emerge-brya coreboot
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Icdab40b6a845a34246d7da336f43e970f7908301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59411
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
as doc #632048, there is a fix in MRC for this sighting but DdrMemoryDown need to be set to 1.
BUG=b:192478111
BRANCH=volteer
TEST=FW_NAME=chronicler emerge-volteer coreboot chromeos-bootimage
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: If7ead2d0bb2955a4f1b81d012ee2e2518b2a82e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59373
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI_DEVICE_SLEEP_D3_COLD
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial
probe during kernel boot and prevent privacy LED blink.
BUG=b:199823938
TEST=Build and boot redrix to OS. Verify entries in SSDT and monitor LED
during boot.
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: I88ea1b87698c63e1bd69367ee857fba3f25c84ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Disabling CPU PCIe RP 2 (commit:3fd39467b Fix S0ix regression)
causes regression in NVMe boot on ADL-P RVP boards.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I0b8b76a5537d8b80777cb7588ce6b22281af7882
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59392
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add separate gpio table for TPM i2c and interrupt. Remove TPM gpios from
early_gpio_table. This allows for initializing TPM gpios separately from
other gpios.
BUG=b:200578885
BRANCH=None
TEST=Build and boot guybrush
Change-Id: I51d087087b166ec3bb3762bc1150b34db5b22f2f
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59083
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on Intel Kit#615686, USB3 only needs to disable TBT and DMA per
port. And if uses USB3 directly you need to set TcssAuxOri accordingly.
BUG=b:206716691,b:205235144
TEST=USB function work as expected at USB3 only sku.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I303d042d6c80194ff48130fe4e9c04b49ca13ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:B
and MT53E512M32D1NP-046 WT:B.
BUG=b:191574298
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Id3fc35605675b953bf993a29f35140f7721eedab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59299
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After CB:57539 applied, it can support romstage GPIO table override.
We can move SSD PERST# de-assertion to romstage.
The reason for this is to give enough time after PERST#
deassertion so that the SSD has enough time to initialize before
the FSP scans the RPs for downstream devices.
BUG=b:199714453
TEST=build
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I242cb1517f564d9d135d523b1e7f95ac34d601f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Correct the WWAN power sequence to meet spec
BUG=b:206079177
TEST=build
Change-Id: Ibba1ecc04b563ae4eedd7596594f33812cbac150
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable Acoustic noise mitigation for redrix and set slew rate to 1/8
BUG=b:204009588
TEST=build and verified by power team
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I0fc0bb68c4de6fca60ee290eb46a77200d748ca8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Related to https://review.coreboot.org/c/coreboot/+/58555
commit-id: 35b7e0a2d82ac
In 58555, we added the SOC ID for Stoneyridge in amdfwtool
command line. But it raised building error because it then called
"set_efs_table" without setting SPI mode. So we skipped calling that.
But in set_efs_table, it has case for Stoneyridge. The boards also
need to have this setting. So we remove the skipping and give the
proper SPI mode in mainboard Kconfig.
Change-Id: I24499ff6daf7878b12b6044496f53379116c598f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add MT53E1G32D2NP-046 WT:B SPD.
BUG=b:205669003
TEST=Boot up without issues.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If084a8af941b36a8f3f608271078e32b093d9108
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Windows (10/11) freaks out and generates an interrupt storm
if two ACPI devices are enabled and share an interrupt, even
when only one device is actually present. To mitigate this,
mark Cyan's touchpad/touchscreen interrupts as SharedAndWake
rather than ExclusiveAndWake.
Test: build/boot Windows 10 on Relm, observe normal CPU
usage in Task Manager for System Interrupts task when
touchpad/touchscreen in use.
Change-Id: I09bc878318f9fa6252f65a42ad46109418805fa0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
According hareware design, mipi panel backlight relies on
AP_BKLTEN(GPIO_12) and TP_EN(GPIO_85). Meanwhile, TP_EN(GPIO_85)
needs pull up to enable PP3300_DISP_ON before AP_BKLTEN(GPIO_12) up.
BUG=b:197709288,b:199081803,b:205166230
BRANCH=trogdor
TEST=emerge-strongbad coreboot
Change-Id: Ie9920e5366f6b1ea9e0da228bd211317516b390a
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Correct GPE settings so touchpad can wake up DUT.
BUG=b:206526991
TEST=emerge-brya coreboot and builds without error
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I1978e9220ad7a275d351ad5eeff7036131926b24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or
less to production that will need to disable autonomous GPIO power
management and then can get H1 version by gsctool -a -f -M
BUG=b:205315500
TEST=emerge-brya coreboot and test that DUT can boot to OS.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib26797fa2d4d0b1a6eb28c5d79b9ac0a6054abd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
SSD sometimes can't be detected in in warm/cold boot stress.
M.2 spec describes SSD_PERST# should be sequenced after power enable.
BUG=b:199967106
TEST=SSD was always discovered in warm/cold boot stress.
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I74c21cd96cf1c4518c4ed7c0b3b39e915b6b1ff7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable VBOOT_EARLY_EC_SYNC in corebot
BUG=b:201356952
BRANCH=None
TEST=Tested on Brya id 2
Signed-off-by: Boris Mittelberg <bmbm@google.com>
Change-Id: I6e480d64a5d90d5bb9cf59ed60b7b53af9edf46a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add VBTs for all hatch variants currently supported by
ChromeOS recovery images. For variants which use multiple
VBTs and select at runtime, ensure these are added directly
to CBFS.
Change-Id: I3c62ce204e3272e778ba0a34f7a47a65d8125f53
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: Ie29242e635bae1e2754bc1109754a64cb496af29
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
TypeC AUX configuration is variant specific. So move into variant level.
BUG=b:205235144
TEST=No typeC port 0 AUX in felwinter.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I02bfea462cf4c6359fd8d5cca4368786ee03bc8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
For Guybrush Board Version 2, Nipperking Board Version 1,
update SPKR GPIO to match H/W schematic:
SPKR: GPIO31
For Nipperkin Board Version 2, update SPKR GPIO to
match H/W schematic:
SPKR: GPIO70
BUG=b:202992077
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
Change-Id: I3d82292b116f53d85d9518364ffd2169bd915a7e
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59051
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VBTs for all octopus variants currently supported by
ChromeOS recovery images. For variants which use multiple
VBTs and select at runtime, ensure these are added directly
to CBFS.
Change-Id: I4b5c4268f9255d658f9762d94488db66e0677830
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I2e57c4f1baa8a42bde2642e7f76ddead7bfd6a58
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Windows (10/11) freaks out and generates an interrupt storm
if two ACPI devices are enabled and share an interrupt, even
when only one device is actually present. To mitigate this,
mark Peppy's interrupts as Shared rather than the default
of Exclusive.
Test: build/boot Windows 10 on Peppy, observe normal CPU
usage in Task Manager for System Interrupts task when
touchpad in use.
Change-Id: Ida78ddec3105cef6581cdde78da2e2c97d983a0a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This board does not have a LPC or eSPI connection to the NC FPGA anymore
and therefore IO port 0x80 is not useable for POST codes anymore. Enable
the feature of sending the POST codes to the NC FPGA via PCI so that the
POST codes are visbile again in coreboot.
Change-Id: I9043e4ec9a2ad6b946e373bb3dce9da3d42d00d1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add support for RTC and clkbuf.
TEST=boot to kernel and check log ok
BUG=b:202871018
Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com>
Change-Id: Ia02a74f685feb2466c113a77cbfa3a7d8fedb595
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Initialize SPM (System Power Management) in RAM stage.
This adds 55ms to the boot time.
TEST=program counter of SPM is correct value(0x250) after booting up
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I822417f7a679107760b202dd43fb79d1934940bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Setting of MSDC is defined by soc, so we move them to soc folder.
TEST=emerge-cherry coreboot; emerge-asurada coreboot
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Update board type to 4 as per MRC team's input. This
fixes LP5 sagv point 3 being clipped from the expected
5200Mhz to 4800Mhz.
TEST=Boot to OS, verify frequency locked.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I9472aec41537425c1ed648b949f484939ee9ff99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
