summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Collapse)Author
2020-03-30mb/google/kohaku: Add enable_delay_ms for wacom penEvan Green
Add an enable reset delay to avoid messages like this in the kernel: i2c_hid i2c-WCOM50C1:00: failed to change power setting. This gets rid of all the warnings except one on reboot/shutdown. That last case likely isn't fixed because the sleep command is being sent directly from i2c_hid_shutdown(), so no ACPI routines get to run and provide the delay. Since the machine is going down for shutdown/reboot anyway, fixing that last case is a lower priority. BUG=b:145094539 TEST=Run on kohaku, switch to guest mode and log out, no errors Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I8fadf497dd09e5b95b1d74443fb0543d3555dbb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-30mb/gigabyte/ga-h61m-s2pv: rename to ga-h61m-seriesAngel Pons
It is not a single mainboard anymore, it's actually three variants. Change-Id: I66f1239abadd8bf93269d6d4617329dc4b925e8d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-03-30mb/gigabyte/ga-h61m-*: Use overridetreesAngel Pons
Make use of overridetrees, as these mainboards are very similar. Tested on GA-H61MA-D3V, still works fine. Change-Id: I1b587a091da631cb172eb76722958da6c7518893 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39668 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30mb/lenovo/t530: Switch to overridetreePeter Lemenkov
Change-Id: I3dfa303b6aae2446fa3a1d67a6e31448277cacdb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-30asus/p2b-f: Transform into variantKeith Hui
TEST=build with BUILD_TIMELESS=1, binary does not change Change-Id: I56983cabfad574b970aba098a178e691c6b354d1 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-30asus/p2b: Transform into variant-enabled structureKeith Hui
Get ready to squash all the ASUS i440BX boards together. Change-Id: Ibc9bfa4fc5b582bf658215bda298523e8ee7b36b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-30mb/gigabyte/ga-h61m-s2pv: Correct PCIe port setupAngel Pons
Coalescing is not needed, as root port #1 is enabled. Also, update the comments to look more like the other two variants. Note that the Intel H61 PCH only has six root ports, so devices 1c.6 and 1c.7 do not exist. Change-Id: I3f4bf99ceec6c77f6e1eabea9b712245afee7d34 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39742 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30mb/google/deltaur: Provide initial devicetreeTim Wawrzynczak
This initial devicetree attempts to correctly configure the status of each PCI device. Not all required drivers are instantiated, nor are all of the SoC options fully selected yet. PCIe root ports are enabled and clocks are assigned. USB ports are assigned. BUG=b:150165131 BRANCH=none TEST=util/abuild/abuild -p none -t google/deltaur -x -a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I911ec08b0db3647d131113a138fb74a55612fd62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30mb/google/deltaur: Add initial GPIO configurationTim Wawrzynczak
This configuration sets up all of the GPIO pads for the first rev of the board. BUG=b:150165131 BRANCH=none TEST=util/abuild/abuild -p none -t google/deltaur -x -a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I4f6398808809492dcb345ccaa09e199fa35e40cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/39674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30mb/google/deltaur: add deltaur mainboard initial supportBora Guvendik
Created a new Google baseboard using Tiger Lake named deltaur, taking volteer as a starting point. BUG=b:151102807 TEST=make build successful Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib98f328df22f39e7d9d625a3292954881ee15b15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-30tgl boards: Configure retimer Aux orientationBrandon Breitenstein
In order to create a working baseline all ports are being set to have retimers. Setting the TcssAuxOri UPD to 0 in order for the SoC to not misconfigure the ports. Volteer will need some additional changes after this is implemented to account for ports that do not have a retimer. This setting is in the process of being documented in the TGL EDS and we can update once it is fully understood what this setting is changing on the SOC side. BUG=b:145943811 BRANCH=none TEST=Boot to OS and check Type-C port1 Display on Volteer, Connecting Type-c display should work regardless of Type-c cable orientation. Change-Id: I29eb0513299126ad8d1ee11ded2c771f28ad13f3 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39460 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30volteer: Create halvor variantFrank Wu
Create the halvor variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:151399850 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_HALVOR Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: If4d3417ba55d56af441c99d949a196328d7a1951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-30mb/tglrvp: Add GPE configurationShaunak Saha
Update the GPE configuration for dw0, dw1 and dw2. BUG=None TEST=build and boot tglrvp Change-Id: I8b406bcbd710e84cec91a8c2d1557902e929f7cc Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39844 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-30mb/google/hatch/var/kindred: set wifi sar for kledDavid Wu
Enable wifi sar feature and set wifi sar name for kled sku. BUG=b:152277272 TEST=emerge-hatch coreboot chromeos-bootimage and verify wifi SAR load by sku-id Change-Id: I9ee242773fd05cc2bcd7bde07da8176022827677 Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-03-29mb/google/glados: disable serial console by defaultMatt DeVillier
Glados boards do not have an exposed serial port outside of the servo interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot google/chell with board defaults Change-Id: Ifad6f805e66438e2c436d9fa235d9be2ecf69179 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29drivers/intel/gma/acpi: Provide default definition for displaysNico Huber
Use it wherever the standard numbers were copied to. Bit 31 is set at runtime unconditionally, so we don't need it here. Change-Id: I0d853c3b8250a2c7b2d1a91985a555e4b17ad76c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39731 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29nb/intel/haswell: Implement proper backlight PWM configNico Huber
Further backport the backlight-PWM handling from Skylake. Beside configuring the PWM frequency in Hz, we also use the PCH's logic for the brightness setting via BLM_PCH_OVERRIDE_ENABLE. Linux would toggle it anyway and that might confuse our ASL code. We assume that the 183Hz value that was set before for Slippy variants was overridden by Linux with the 200Hz VBT value, like it was for the Broadwell Chromebooks. So we set 200Hz for them in the devicetrees. The calculated value for the T440p of 220Hz seems sane and also matches the VBT. Change-Id: I17dfe1a3610d5e2918c617cf5d10896692fdccb3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29mb/google/cyan: Clean up KconfigMatt DeVillier
Cyan has no VGA BIOS available (at least not publicly), so remove related options. Disable SoC serial output by default, since no production devices have this exposed, but leave it as a user option so it can be selected as needed (eg, for use with a Google debug servo). Change-Id: Ic079a39ca5ad0ac653b52248244b94d4bfbd08a4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39872 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29mb/google/glados: remove Chrome-EC defaultsMatt DeVillier
Chrome-EC/PD images for all glados variants need to be built from the board-specific branch, not master. Including the default board names serves no purpose and requires users to deselect the "use built-in EC firmware" in order for the board to build. Test: build google/chell with defaults Change-Id: Ic10f11337b85035068cdc4fe8147413e6b7f57ac Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29mb/51nb/x210: Fix up USB ports in devicetreeMatt DeVillier
Add missing port definition for the mSATA/WWAN mPCIe port, set OC pin for internal ports to OC_SKIP, fix port descrption for mPCIe/WLAN port, remove USB3 definition for right type-A port as it is USB2 only. Test: insert WiFi module into WWAN port, observe BT portion detected and functional. Change-Id: Ie39b99eeb0f605ff07d57c32189fb1f4183713e4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-29hatch: Create sushi variantPaul Fagerburg
Create the sushi variant of the hatch reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 3.0.0). BUG=None BRANCH=None TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_SUSHI Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: Ie900d09ff55e695527eafe68a5a75cd4a0b6d340 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-26mb/intel/cedarisland_crb: Add Cedar Island CRBAndrey Petrov
Just a minimal set of board files needed to get it to boot in 1 CPU mode. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: Ie2f944964e938d8026a6d5d8a22a8449199d08aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/39714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-26mb/ocp/tiogapass: Properly configure early serial outputAndrey Petrov
Tioga Pass comes with AST2500 BMC which offers SuperIO functionality. However we currently do not configure/enable SuperIO chip. As a result system boots pretty silently on cold boot. Then FSP configures SuperIO and resets the system so on next boot serial console does work. This makes debugging difficult because pre-FSP output is invisible. This patch enables bootblock to properly configure desired BMC SuperIO port so early serial output is visible. TEST=do a cold boot on OCP Tioga Pass, observe bootblock output starting from bootblock. Change-Id: Iff8e6a862858d733f529bb9b8c65e22e5ec6b521 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-03-26mb/intel/jasperlake_rvp: add display related UPD configsRonak Kanabar
Change-Id: Iad0b394dea017223a5b92fff0cb4c2ed1d5a7bd7 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39402 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/intel/jasperlake_rvp: Correct Kconfig optionsMaulik V Vaghela
1.Select CHROMEOS_EC related Kconfig for variant board with external EC support. 2.Select proper CHROMEOS Kconfigs which are required for all variants. 3.Disable Intel EC region in case of external EC. BUG=None BRANCH=None TEST=Compilation is successful for both Jasper Lake RVP variants. Change-Id: I290b3748777e18476651101de71df9080dd3105c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39584 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/google/dedede: Query the EC for board versionDtrain Hsu
The board version is part of EC's EEPROM, select Kconfig item to enable requesting the EC for board version. BUG=b:152374066 TEST=Verified the mainboard version is from EC's EEPROM. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Idd8aceed83439cb500e2b03153e9f8ba93979ee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-03-26mb/google/hatch/variants/nightfury: Replace unneeded white spaces by tabsElyes HAOUAS
Change-Id: Icda241cfac7b428176515d7996a48cb01b1dc976 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39815 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26mb/google/volteer: Use tabs for indentsElyes HAOUAS
Change-Id: I7304b06d7bf34fb7126acfdef811481dc5cba598 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-26mb/facebook/monolith: Update GT-Sliced icc_maxWim Vervoorn
Update the icc_max for the GT-Sliced VR domain according to the hardware design. BUG=N/A TEST=build Change-Id: Ib9f7d77d144a282214e6bda8a4e836873c395487 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39804 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-26drivers/net/r8168: Fix ethernet_mac[0-9] format for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. Adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn V.2: Fixup a code comment typo while we are here. V.3: Vary special casing semantics for idx==0 => default mac addr is set. V.4: Rework to still support the legacy path. BUG=b:152157720 BRANCH=none TEST=none Change-Id: Idf83cc621a9333186dabb668b22c4b78e211930a Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-26soc/intel/xeon_sp: Refactor code to allow for additional CPUs typesAndrey Petrov
Refactor the code and split it into Xeon common and CPU-specific code. Move most Skylake-SP code into skx/ and keep common code in the current folder. This is a preparation for future work that will enable next generation server CPU. TEST=Tested on OCP Tioga Pass. There does not seem to be degradation of stability as far as I could tell. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I448e6cfd6a85efb83d132ad26565557fe55a265a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39601 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25create stdio.h and stdarg.h for {,v}snprintfJoel Kitching
Sometimes coreboot needs to compile external code (e.g. vboot_reference) using its own set of system header files. When these headers don't line up with C Standard Library, it causes problems. Create stdio.h and stdarg.h header files. Relocate snprintf into stdio.h and vsnprintf into stdarg.h from string.h. Chain include these header files from string.h, since coreboot doesn't care so much about the legacy POSIX location of these functions. Also move va_* definitions from vtxprintf.h into stdarg.h where they belong (in POSIX). Just use our own definitions regardless of GCC or LLVM. Add string.h header to a few C files which should have had it in the first place. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: I7223cb96e745e11c82d4012c6671a51ced3297c2 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-03-25superio/nuvoton/nct5104d: add chip config option to reset GPIOsMichał Żygowski
Define a chip option to explicitly soft reset all enabled GPIOs to default state. TEST=boot FreeBSD 11.2 on PC Engines apu1, change GPIO configuration using nctgpio module and check whether GPIOs are reset after reboot Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iae4205574800138402cbc95f4948167265a80d15 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-25mb/facebook/monolith: Configure COMB to 0x3e8Wim Vervoorn
The 2nd COM port's base address defaults to 0x2f8. Current software for this system expects the port at 0x3e8. Configure COMB to use 0x3e8 instead of 0x2f8. BUG=N/A TEST=tested on facebook monolith Change-Id: Ibb462bad5f0594e0b5c8dea6e02cd42d58d999ab Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-25mb/intel/jasperlake_rvp: Update FMAP for jslrvpMeera Ravindranath
Remove unused SMM_STORE space and use it for RW_LEGACY area BUG=None TEST=None Change-Id: I5724b860271025e8cb8b320ecbd33352ef779660 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-03-25mb/google/dedede: Update EC_MKBP_INT_L configurationKarthikeyan Ramasubramanian
The concerned GPIO is configured as an open drain at the Embedded Controller side without an external pull-up. This causes leakage in the PP3300_A rail. So configure the GPIO to have a weak internal pull-up at the SoC side. BUG=b:151680590 TEST=Build the mainboard. Ensure that there are no leakages in the PP3300_A rail. Change-Id: I5553cf40adb92edc0fecab5c875ec8d72063ba7b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-25mb/intel/jasperlake_rvp: Add config check for lid switchMaulik V Vaghela
We should only define function to get lid switch and recovery mode switches when CHROMEEC_SWITCHES is not available. Correct this to avoid compilation issues BUG=None BRANCH=None TEST=jslrvp code compilation is fine Change-Id: I2445d40da1540c9d8c8c5fc845a4f38a5abf983e Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39585 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/intel/jasperlake_rvp: Add memory config for Jasper Lake RVPRonak Kanabar
Add memory initialization parameters for Jasper Lake RVP boards Jasper Lake RVP supports two variants, one with memory LPDDR4 and another with DDR4 Based on board id, mainboard will pass correct memory parameters to the fsp. BUG=None BRANCH=None TEST=Check compilation for Jasper Lake RVP and check memory training passes. Change-Id: Idc92363a2148990df16c2068c7986013d015f604 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39195 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25acpi: correct the processor devices scopeMichał Żygowski
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here. Additionally add processor scope patching for P-State SSDT created by AGESA, becasue AGESA creates the tables with processors in \_PR scope. TEST=boot Debian Linux on PC Engines apu2, check dmesg that there are no errors, decompile ACPI tables with acpica to check whether the processor scope is correct and if IASL does not complain on wrong checksum, run FWTS Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I35f112e9f9f15f06ddb83b4192f082f9e51a969c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39698 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-25mb/ocp/tiogapass: Enable IPMI KCSJohnny Lin
A bigger than zero value of bmc_boot_timeout must be set for KCS ipmi_get_bmc_self_test_result() to run, otherwise the self test result will be error and won't write SMBIOS type 38 table. Here we set 60 seconds as the maximal self test timeout. Tested=Check if the BMC IPMI response data and SMBIOS type 38 on OCP Tioga Pass are correct or not. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I3678973736a675ed22b5bc9da20a2ca947220f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/38995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-03-25mb/pcengines/*/devicetree: remove non-existing NCT5104d LDN 0xeMichał Żygowski
Nuvoton NCT5104d has no LDN 0xe according to its datasheet. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0d34218d88b779b08c380d2396ff9ab9253597fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/38851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-25mb/pcengines/apu2: enable PCIe power management featuresMichał Żygowski
Enable ASPM L0s and L1, Common Clock and Clock Power Management for all PCIe ports. TEST=boot Debian linux and check new PCIe capabilities appear in lspci Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I0a4c83731742f31ab8ef1d326e800dfdc2abb1b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-25mb/pcengines/apu2: add reset logic for PCIe slotsMichał Żygowski
PC Engines apu2 had many problems with PCIe cards detection. The cards were inconsistently detected when booted from G3, S5 or after a reboot. AGESA can reset PCIe slots using GPIO via callback. Use it to reset the slots that support using GPIO as reset signal. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I8ff7db6ff85cce45b84729be905e6c895a24f6f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma/acpi: Reduce display switching stubsNico Huber
_DCS, _DGS and _DSS are required by specification. However, we never implemented them properly, and no OS driver com- plained yet. So we stub them out and keep the traditional behavior in case an OS driver checks for their existence. The old implementations also only returned static values as there never was any write to their GNVS variables. The TRAP() that was called in one place is actually implemented by some ThinkPad's SMI handler as docking event. However, as the call precedes these SMI handlers in coreboot history, it's most likely an accident. Change-Id: Ib0b9fcdd58df254d3b2290900e3bc206a7abd92d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-24mb/google/hatch: Give first NIC in Puff idx 1 for vpdEdward O'Callaghan
The format for VPD has changed s.t. the first NIC should always have a zero concat to the end. drivers/net supports this with the workaround of setting the idx to 1. The longer term fix is to adjust all the respective boards to shift back by one and adjust drivers/net friends to remove the 'special casing' of idx == 0. Background: https://chromeos.google.com/partner/dlm/docs/factory/vpd.html#field-ethernet_macn BUG=b:152157720 BRANCH=none TEST=none Change-Id: I510428c555b92398a5199b346dffb85d38495d74 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23mb/pcengines/apu2/mptable.c: add GNB IOAPIC to MP TableMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I385339761b3e1b5dcadb67b8ca29b1518c2db408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-23acpi: Change Processor ACPI Name (Intel only)Christian Walter
The ACPI Spec 2.0 states, that Processor declarations should be made within the ACPI namespace \_SB and not \_PR anymore. \_PR is deprecated and is removed here for Intel CPUs only. Tested on: * X11SSH (Kabylake) * CFL Platform * Asus P8Z77-V LX2 and Windows 10 FWTS does not return FAIL anymore on ACPI tests Tested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ib101ed718f90f9056d2ecbc31b13b749ed1fc438 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-23mb/gigabyte/ga-h61m-ds2v: Fix PCIe port numbersAngel Pons
A certain somebody (that would be me) forgot how to count, it seems. Change-Id: Iac0ac5827ca242c465a2e8be92a823c8fc9b2935 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39741 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/gigabyte/ga-h61ma-d3v: Correct PCIe port setupAngel Pons
Coalescing is not needed, as all PCIe ports are used. Change-Id: Icf31f6672e0a54d119a6537da1b52c42f9cee823 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39740 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/gigabyte/ga-h61m-*/devicetree.cb: Add missing IRQAngel Pons
IRQ 0x70 was not declared for device 2e.7, and coreboot whined about it. Change-Id: If40aa390722cf253169003129b31f20543fde5dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39739 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-23mb/gigabyte/ga-h61ma-d3v: Correct subsystem IDAngel Pons
Linux does not handle either value in any special way, though. Change-Id: I833cb94e65b9ddfb79edbcdd0216c70740aa4a16 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-23src/mb/google/volteer: Add camera ACPI configurationDaniel Kang
Add camera ACPI configuration for Ripto/Volteer BUG=None BRANCH=None TEST=Build and boot Ripto or Volteer. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I2b47ccd989192273a29f09bf097e12e357929334 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/volteer: Enable PD_MCU devicePrashant Malani
This is required for PD notifications on the cros_ec driver. BUG=b:150649744 TEST=Boot volteer with this patch and verify that PD notifier events are being generated. Signed-off-by: Prashant Malani <pmalani@chromium.org> Change-Id: I2e72320b025a3dfa7412181586cb142a4503eda5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23mb/pcengines/apu1/mainboard.c: Add SMBIOS type 16 and 17 entriesMichał Żygowski
Use information provided by AGESA to fill the SMBIOS memory tables. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Id73de7c2b23c6eb71722f1c78dbf0d246f429c63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-23mb/tglrvp: Update Audio AIC settings for Tiger LakeSrinidhi N Kaushik
Update Audio AIC UPD settings and gpio pad configs for Tiger Lake. BUG=none BRANCH=none TEST=Build and boot tigerlake rvp board Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I45935b79f6fa4ad66238eead9258a4f15feec508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23src/mb/intel/tglrvp: Fix board config flag for TGL-UP4 camera ACPIDaniel Kang
Camera ACPI had an incorrect board config flag for TGL-UP4. BUG=None BRANCH=None TEST=Build and boot TGLRVP-UP3 or UP4. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ided0e146a9240169d3f1f27a86218ac1a942b899 Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-03-23mb/google/dedede: Update SPD index for waddledeeKarthikeyan Ramasubramanian
Micron memory part uses SPD Index 0. BUG=b:152005386 TEST=Build the mainboard. Change-Id: I990a95b13d636148f0f922fd5c6d4e489d35ed2c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-23src: capitalize 'APIC'Elyes HAOUAS
Change-Id: I487fb53bb2b011d214f002fc200ade2f128a4cc6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-20mb/google/dedede Add Audio support for waddledooAamir Bohra
1. Configure Audio GPIOs. 2. Set i2c4 configuration. 3. Update PCH HDA configuration TEST=Verify codecs gets listed with aplay -l command. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Yong Zhi <yong.zhi@intel.com> Change-Id: Ic0516c7a8fee79ce17343a7f42895d6ef534fec9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-onlyAngel Pons
Change-Id: I005bf205142d4d8c5e12378f33d2100d278fa174 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-or-laterAngel Pons
Change-Id: I78f06b54a6a03d565cf86f1d7bdf37965c3f6ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/**/gma-mainboard.ads: Remove copyright statementsAngel Pons
They are already in AUTHORS. Change-Id: I315c0c57babfa239e3d7c501a4183b8996999e6e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-20mb/google/nightfury: Update overridetree.cbSeunghwan Kim
Updating devicetree to enable ELAN touchpad and ELAN touchscreen on nightfury BUG=none BRANCH=firmware-hatch-12672.B TEST=built and verified touchpad and touchscreen worked Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Ieba6558ce3897ce2f95f51ed667465d84b4ab189 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-20mb/hp/z220: Fix VGA graphics initPatrick Rudolph
The VGA port has the DDC on port B. Select the correct Kconfig and fix graphics init failing on VGA. Tested on HP Z220, libgfxinit reports success and SeaBIOS is displayed on the connected VGA monitor. Change-Id: Ie5ec1a2d4606a21e1dc4217ff6fefe5ee35ac543 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-19mb/asrock/b85m_pro4: Add new mainboardAngel Pons
This is a µATX mainboard with a LGA1150 socket and four DDR3 DIMM slots. Working: - All four DIMM slots - Serial port to emit spam - Some USB ports - Integrated graphics (libgfxinit) - HDMI and DVI - Intel GbE - All PCIe ports - Both PCI ports behind the ASM1083 PCI bridge - At least one SATA port - RAM initialization with MRC binary - Flashing with flashrom - S3 suspend/resume - Rear audio output - VBT - SeaBIOS to boot Arch Linux Not working: - PS/2 keyboard (detected as mouse) Untested: - The other audio jacks - S/PDIF - VGA - EHCI debug - Front USB headers - Non-Linux OSes - TPM header - Parallel port Change-Id: I10a16dfc56f2aa88648c8aaaba4feab40c491504 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36770 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18src/mainboard/g/octopus: Enables GMM in the devicetree for octopusFranklin He
Adds GMM into the baseboard of Octopus For GLK, PCI device 3 is GMM according to Document#: 569262(Glk EDS Vol-1 rev2-7) Related to Gerrit review 39579 BUG=b:151115705 BRANCH=None TEST=Flashed final image on Chromebook Change-Id: I75b4a835c18c5eeb542b7f7b89deea45a31e47bd Signed-off-by: Franklin He <franklinh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-18mb/google/dedede: Support integratred BT enumerationAamir Bohra
The integrated BT is routed via USB2 port 8, add USB configuration to support integrated BT enumeration. Change-Id: I46d8c92ba57cd72a91ee15ef4d11f07824c29e9a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-18mainboard/[g-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-18mainboard/[^a-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I18e513cefc373b1cd70d31d1159928cc948a8476 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-03-18mainboard/[a-f]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I57fc98788bb47df16d6aedd0f0701e9991801743 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2020-03-17src/mb/intel/tglrvp: Update camera ACPI configurationDaniel Kang
* Change power sequence to make it closer to ov8856 sensor data sheet version 2 * Handle different PWREN GPIO pins for up3 and up4 * Add link frequencies definitions to sensor side * Clean up format BUG=None BRANCH=None TEST=Build and boot TGLRVP U or Y. Start camera app and able to capture images. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ic11a36f1f82fe425c1a5796847ce020007064403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39529 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17src/soc/intel/tigerlake: Fix incorrect use of Field objects in ASLRizwan Qureshi
Method RAOW is assuming that the first argument is a Field object and writing to it expecting the register to get updated. However, the callers are passing in the value of the Field object instead. This eventually is resulting the IMGCLK not getting enable/disabled on the platform. Fix this by sending the exact address of the register to be updated. Also MCCT was setting the clock frequency in both case i.e, Clock Enable and Disable. Split the MCCT method in two, MCON and MCOF to fix the sequencing like below MCON: Set frequency Enable clock MCOF: Disable clock Also, make use of MCON and MCOF methods for camera clock control in tglrvp. This is to avoid the buildbot marking the patch unstable. BUG=None BRANCH=None TEST=Build and Boot waddledoo board and verified that IMGCLKOUT for world facing camera is enabled/disabled and able to capture images. Build and Boot Tiger Lake RVP board and verified that IMGCLKOUT for world facing camera is enabled/disabled and able to capture images. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: I8b886255d5f38819502ae1f4af0851b5a0922b22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39498 Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17mb/google/octopus: Add custom SAR values for Foob360Peichao Wang
Foob360 would prefer to use different SAR values. Since Foob360 sku id is 9. BUG=b:149362272 BRANCH=octopus TEST=build Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I8cc5d73629990f19d2c1044debdba4990c54d07e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com>
2020-03-17mb/purism: remove duplicate ACPI power buttonMatt DeVillier
These platforms use the standard fixed function power button and do not need a second power button device declared or the kernel will end up with two devices reporting the same event. Same change was applied to all google mainboards in CB:27272 which contains more detail. Change-Id: I17c85e43493530d04f4fa13f33bec6d027cb3147 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39577 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-17mb/google/dedede: Add waddledee variantKarthikeyan Ramasubramanian
Add initial support for waddledee variant board. BUG=b:151576904 TEST=Build the mainboard and variant board. Change-Id: I20d41fbbb78c7fd2f964a97ffebbc9c3bbfb1c5c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-16mb/intel/tglrvp: Enable ISH driver and register firmware nameli feng
BRANCH=none BUG=b:145946347 TEST=boot to OS with TGL RVP UP3, then copied ISH firmware to host file system /lib/firmware/intel/tglrvp_ish.bin check "dmesg |grep ish", it shows: ish-loader: ISH firmware intel/tglrvp_ish.bin loaded cros_ec_ishtp: Chrome EC device registered Those means shim loader in coreboot has loaded ISH firmware, and firmware is running successfully. Signed-off-by: Hu, Hebo <hebo.hu@intel.com> Signed-off-by: li feng <li1.feng@intel.com> Change-Id: I1ee8050aef6ec0828f16ef2695b5347278caa820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39481 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16mb/51nb/x210: correct battery ACPIMatt DeVillier
The X210 EC reports battery values in broken mAh. These have to be adjusted by 10000 * DGVO, as documented in https://github.com/torvalds/linux/blob/master/drivers/acpi/battery.c. Taken from https://github.com/harrykipper/coreboot, commits 2f68f138adb25605e5715896636cf33f6de5bd95 c1c72cc43708a6647f263a767c39cf3072908e20 Change-Id: Ie097272443b18b16c3937034f874d3b5a6bdd62a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39142 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-16mb/51nb/x210: update devicetreeMatt DeVillier
- Add USB ports for SD card reader, fingerprint reader, and internal port. - Enable PcieRpClkReqSupport on NVMe root port, correct values for ClkReq/ClkSrc. - Improve comment for M.2-2230 USB port (BT) Parts derived from x210_test branch of HarryKipper's repo: https://github.com/harrykipper/coreboot Change-Id: Ib64629ada4726e5edc080608f71a51f56a9b747c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-16mb/51nb/x210: add libgfxinit supportMatt DeVillier
Derived from x210_test branch of HarryKipper's repo: https://github.com/harrykipper/coreboot Test: build/boot x210, test eDP, MiniDP, VGA outputs Change-Id: Ie2b79b236a458ebd243c992d6e615e41930eeb50 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-16mb/51nb: Add support for the 51nb X210Matthew Garrett
The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems, based on a modern Kabylake CPU. It also ships with no firmware protection, (IFD is fully unlocked, no protected regions are set, no Bootguard), making it an ideal coreboot target. This port is based on the support for the Skylake-based Purism Librem 13v3, with the following significant changes: * EC firmware is contained within the system SPI flash, and so a blob of EC firmware must be injected to a defined location during image build. * GPIO layout is different - this is currently just a raw import of the GPIO configuration from the vendor firmware * The system has two DIMMs, so an additional SPD address has been added * The USB port layout is different * The EC must be enabled at boot time through SuperIO-style logical device configuration * EC register layout is different, necessitating changes in the ACPI tables * The HDA pins are different * The genx_dec config is different All hardware appears to work as expected, although the SD reader is untested. Signed-off-by: Matthew Garrett <mjg59@google.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-15mb/google/kahlee/nuwani: support new Elan touch panel for NuwaniTommie
This is new Elan touch screen IC, which includes touch panel and USI pen. BUG=b:151514167 TEST=build bios and verify touch screen works fine Signed-off-by: Tommie Lin <tong.lin@bitland.corp-partner.google.com> Change-Id: I98801b8c31812637f71d7eaaa0f12b47901dc47a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-03-15nb/intel/nehalem: Rename to ironlakeAngel Pons
The code is for Arrandale CPUs, whose System Agent is Ironlake. This change simply replaces `nehalem` with `ironlake` and `NEHALEM` with `IRONLAKE`. The remaining `Nehalem` cases are handled later, as changing some of them would impact the resulting binary. Tested with BUILD_TIMELESS=1 without adding the configuration options into the binary, and packardbell/ms2290 does not change. Change-Id: I8eb96eeb5e69f49150d47793b33e87b650c64acc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38941 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/asus/p8z77-m_pro: Use uppercase for *PRO*Paul Menzel
Consistently use the official uppercase spelling. Change-Id: I2e2d62389d1b965f4a391080a10e7f97fa787d14 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39350 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/intel/tglrvp: Enable CNVi in devicetree for Tiger Lake UP3Srinidhi N Kaushik
Enable CNVi in devicetree and add gpio pad configs for CNVi BUG=none BRANCH=none TEST=Build and boot tglrvp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I71146960e0d53dae87946a0365dac6f224a72391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39464 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/hatch: Create palkia variantKane Chen
Add Palkia as a variant of Hatch. BUG=b:150254194 BRANCH=none TEST=none Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I6a303d9fc2be9ea358ad66cd648738187c974193 Reviewed-on: https://review.coreboot.org/c/coreboot/+/38860 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15mb/google/volteer: Use generic SPD filesNick Vaccaro
Volteer uses 4 bits (hardware straps) to indicate what memory configuration the board is populated with (i.e. which SPD file to use for the populated memory). This allows for only 16 different SPDs for supporting Volteer and all future variants of Volteer. Currently, each memory chip needs its own SPD file, so we can only support 16 different memory chip options for Volteer and all of its variants. Generic SPD files are just SPD files that have been stripped down to contain only fields that are important for the memory controller (strips out items like vendor info, for example). Using generic SPD files allows for more than 16 different memory options given it's no longer a 1-to-1 mapping as similar memory modules from different vendors can share the same generic SPD file. BUG=b:147857288 TEST="emerge-volteer coreboot chromeos-bootimage", flash ripto and verify ripto boots to kernel and "cat /proc/meminfo" reports 8GB of memory. Change-Id: I17bd4f4a00b4e3bbaf845d6d321962c11569a186 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39423 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/google/dedede: Configure WLANKarthikeyan Ramasubramanian
Turn on CNVi device. Turn on PCIe Root port that hosts WLAN device. Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used for WLAN - both CNVi and M.2. BUG=None TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I9bb8e57cdb688bc544929c94af380b9ef1d936a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-03-14mb/google/dedede: Add BT Disable GPIO configurationKarthikeyan Ramasubramanian
Disable the BT module in bootblock and enable it in ramstage. This allows for loading the BT firmware during reboot. TEST=Build and boot the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0406a68ffcab2675a1aedb212cb7c8508a5b61fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/39446 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/google/drallion: Enable GEO SAREric Lai
Enable GEO SAR function. BUG=b:150347463 BRANCH=drallion TEST=NA Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iace9aa0245840328aa13920512747ca7f60e85dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/39467 Reviewed-by: Mathew King <mathewk@chromium.org> Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-14mb/intel/tglrvp: Update GPIO settingWonkyu Kim
Update GPIO reset type from PLTRST to DEEP. DEEP setting is more conservative for S3/S4/S5. Detail information is bug. BUG=b:151305120 TEST=Build and boot to OS Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie7d08560ea2ef3623bbd4734b30c80e707869c7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/39476 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/volteer: Enable Audio DSP UPDSrinidhi N Kaushik
Provide settings for configuring the link between HD-Audio controller and display unit for purposes of HDMI/DP Audio playback. BUG=b:144708516, b:148385924 TEST=none Change-Id: I225faac68729b28be65b4d8f1f83769a874f84ff Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39356 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-13mb/google/hatch/Kconfig: Disable VBOOT_EARLY_EC_SYNC on PuffEdward O'Callaghan
Early ec sync needs to be disabled for EFS2 to function. BUG=b:151115320 BRANCH=none TEST=none Change-Id: I384d072d9614a5cd30837f7cdfb777ad5e4f6b19 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-03-12mb/google/dedede: Enable trackpad supportPandya, Varshit B
1. Configure trackpad interrupt GPIO. 2. Set i2c0 configuration. 3. Add trackpad ACPI support. TEST= Verify trackpad working. Verify I2C SCL frequency below 400Khz on trackpad operation. Change-Id: I52c578aef591f5be90fb709bab4c8342ea9729e6 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-03-12mb/google/hatch: Create nightfury variantraymondchung
Create new variant and build for nightfury. BUG=b:149226871 TEST=FW_NAME="nightfury" emerge-hatch coreboot chromeos-bootimage Change-Id: If08692f4a2d216c57499098cc0e35abd708d99d4 Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2020-03-12mb/google/volteer: configure L1Substate for PCIeWonkyu Kim
Limit PcieL1Substate for RP9, RP11 for ES1 NVMe warm reboot workaround. Reference: #613582 Tiger Lake PCH-LP Sightings Report issue id #1409566330 BUG=none BRANCH=none TEST= boot to OS and check warm reboot with NVMe Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ie85bf71c43427e326ef2ba674da4566f8f51495a Reviewed-on: https://review.coreboot.org/c/coreboot/+/39413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-03-11mb/google/dedede: Add ACPI configuration for USB portsKarthikeyan Ramasubramanian
Enable USB ACPI driver. Add ACPI configuration for all the USB ports. Since one of the USB ports is used for Bluetooth configure the reset_gpio used by that port. TEST=Build the mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3e7b8f00102c96dcc295601359d3ecfbcd1bea00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-03-11mb/intel/tglrvp: Enable Hybrid storage modeWonkyu Kim
BUG=b:148604250 BRANCH=none TEST=Build and test booting TGLRVP form NVMe and Optane Check PCIe lane configuration Show all the NVMe devices lspci -d ::0108 Show all the NVMe devices and be really verbose lspci -vvvd ::0108 Print PCIe lane capabilities and configurations for all the NVMe devices. lspci -vvvd ::0108 | grep -e x[124] Print all the PCIe information of the device ae:00.0 lspci -vvvs ae: Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I5fc8fa0897ad006de9ebe20115bf3033e1e1b499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>