Age | Commit message (Expand) | Author |
2020-08-08 | mb/asrock/h110m: remove unused Device4Enable from devtree | Maxim Polyakov |
2020-08-07 | mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OS | Martin Roth |
2020-08-07 | soc/intel/skylake: Enable thermal subsystem depending on devicetree | Felix Singer |
2020-08-07 | soc/intel/cnl: Set Heci1Disable depending on devicetree config | Felix Singer |
2020-08-07 | mb/elmex/pcm205401: Add comment about the code | Angel Pons |
2020-08-07 | mb/asrock/b85m_pro4: Support LPC TPM | Angel Pons |
2020-08-07 | mb/intel/kblrvp: Factor out `IoBufferOwnership` | Angel Pons |
2020-08-07 | mb/intel/kblrvp: Factor out `HeciEnabled` | Angel Pons |
2020-08-07 | mb/google/volteer: support variant defined spd paths | Nick Vaccaro |
2020-08-07 | Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings" | Paul Fagerburg |
2020-08-07 | mb/google/dedede/var/magolor: Select 16 MB SPI ROM | Ren Kuo |
2020-08-06 | mb/google/volteer/var/halvor: Update dq/dqs mappings | Amanda Huang |
2020-08-06 | mb/google/zork: Configure GPIO_89 as PAD_NC | Furquan Shaikh |
2020-08-06 | mb/google/zork: Add touchscreen power control | Furquan Shaikh |
2020-08-06 | mb/google/zork: Switch USI_RESET to active low polarity for v3.6+ | Furquan Shaikh |
2020-08-06 | mb/google/zork: Use dev_nested_path for dmic gpio update | Josie Nordrum |
2020-08-06 | mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6 | Josie Nordrum |
2020-08-06 | mb/google/zork: Add kconfigs to check schematic version 3.6 | Josie Nordrum |
2020-08-06 | mb/google/volteer: add support for ddr4 memory | Nick Vaccaro |
2020-08-06 | mainboard/google/puff: Remove second temp sensor | Andrew McRae |
2020-08-06 | mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootup | Huayang Duan |
2020-08-06 | mb/google/kukui: Add a new config 'Fennel' | xiatao5 |
2020-08-05 | mb/intel/jasperlake_rvp: Replace static camera ACPI by driver | Sugnan Prabhu S |
2020-08-05 | sb/intel/i82801{gx,ix,jx}/acpi/lpc.asl: Drop dead code | Angel Pons |
2020-08-05 | mb/google/volteer/var/voxel: Add Raydium touchscreen support | David Wu |
2020-08-05 | mb/google/vilboz: update telemetry settings for vilboz | Peichao Wang |
2020-08-05 | mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI node | Lucas Chen |
2020-08-05 | src: Use space after 'if', 'for' | Elyes HAOUAS |
2020-08-05 | src: Use space after switch, while | Elyes HAOUAS |
2020-08-05 | baytrail mainboards: Clean up mainboard.c | Arthur Heymans |
2020-08-05 | mb/google/zork: update DRAM SPD table for dirinboz | Kevin Chiu |
2020-08-04 | mb/google/zork/var/vilboz: Enable support for garaged stylus | Furquan Shaikh |
2020-08-04 | mb/kontron/bsl6: Add new Skylake COMe module | Nico Huber |
2020-08-04 | soc/intel/baytrail: Factor out `acpi_fill_madt()` | Angel Pons |
2020-08-04 | mb/supermicro/x11ssh-tf: Drop `PcieRpClkReqSupport` lines | Angel Pons |
2020-08-04 | mb/**/{devicetree,overridetree}.cb: Indent with tabs | Angel Pons |
2020-08-03 | mb/gizmosphere/gizmo/mainboard.c: Remove white space after 'mdelay' | Elyes HAOUAS |
2020-08-03 | mb/google/zork: Pass oscout system clk to rt5682 | Akshu Agrawal |
2020-08-03 | mb/bostentech: Add GBYT4 port | Mate Kukri |
2020-08-03 | mb/asrock/h110m: Relocate devicetree settings | Angel Pons |
2020-08-03 | nb/intel/ironlake: Drop `D0F0_` prefix from register names | Angel Pons |
2020-08-03 | mb/google/dedede: Update CPU critical temperature | Sumeet R Pawnikar |
2020-08-03 | mb/google/kukui: Add Micron 8GB discrete LPDDR4X DDR support | Huayang Duan |
2020-08-03 | mb/intel/cedarisland: Remove duplicated code | Maxim Polyakov |
2020-08-03 | mb/intel/cedarisland: Use FSP_M_CONFIG structure to set UPD | Maxim Polyakov |
2020-08-03 | mb/google/dedede/var/madoo: Add discrete WiFi configuration | Dtrain Hsu |
2020-08-03 | mb/google/dedede/var/madoo: Support Elan touchpad and configure I2C ports | Dtrain Hsu |
2020-08-03 | mb/google/dedede/var/madoo: Enable Goodix touchscreen | Ian Feng |
2020-08-03 | mb/up/squared/gpio: 3/3 Convert bit field macros to PAD_CFG | Maxim Polyakov |
2020-08-03 | mb/up/squared/gpio: 2/3 Exclude fields that are not in PAD_CFG* | Maxim Polyakov |
2020-08-03 | mb/up/squared/gpio: 1/3 Decode raw register values | Maxim Polyakov |
2020-08-03 | mb/google/volteer: Change wake to be triggered on a raising edge | Alex Levin |
2020-08-03 | mb/emulation/qemu-armv7: Fix board | Patrick Rudolph |
2020-08-03 | mb/google/kukui: indent config names for burnet and esche | Hung-Te Lin |
2020-08-03 | mb/google/volteer/var/todor: Support ELAN i2c-hid touchpad | David Wu |
2020-08-03 | mb/google/zork: Add Samsung K4AAG165WA-BCTD SPD | Kevin Chiu |
2020-07-31 | mb/ocp/deltalake: configure DIMM_MAX | Jonathan Zhang |
2020-07-31 | drivers/ipmi/ocp: Add function to support OCP specific ipmi command | Tim Chu |
2020-07-31 | mb/ocp/deltalake: Update SMBIOS type 4 -- Processor Information | Morgan Jang |
2020-07-30 | mb/intel/tglrvp/Kconfig: Drop unnecessary choice name | Angel Pons |
2020-07-30 | mb/amd,google/mandolin,zork: Set EFS SPI platform config | Matt Papageorge |
2020-07-30 | mb/google/zork: remove indirection for dxio lane configuration | Aaron Durbin |
2020-07-30 | mb/google/zork/var/ezkinil: Configure boot media for new SKUs | Lucas Chen |
2020-07-30 | mb/google/zork: add USB over-current pin mapping to devicetree | Felix Held |
2020-07-30 | mb/ocp/tiogapass: Add SMBIOS type8 data table | BryantOu |
2020-07-30 | mb/ocp/deltalake: Add VPD variable for FRB2 timer action | Johnny Lin |
2020-07-30 | mb/google/dedede: Add Goodix touchscreen | Evan Green |
2020-07-29 | mb/intel/tglrvp: Update TCSS D3Hot and D3Cold configuration | John Zhao |
2020-07-29 | mb/google/volteer: Update TCSS D3Hot and D3Cold configuration | John Zhao |
2020-07-29 | soc/intel/skylake: Enable HDA depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable HECI3 depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable eMMC depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable TraceHub depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SMBus depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable LAN depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SATA depending on devicetree configuration | Felix Singer |
2020-07-29 | mb/google/zork: update stapm parameter for berknip | Kevin Chiu |
2020-07-29 | mb/intel/tglrvp: Add support for USB Type-C connector device properties | John Zhao |
2020-07-29 | mb/google/dedede/var/magalor: Generate SPD ID for supported parts | Karthikeyan Ramasubramanian |
2020-07-29 | mb/supermicro/x11-lga1151-series: correct superio interrupts | Michael Niewöhner |
2020-07-29 | mb/ocp/tiogapass: Configure IPMI FRB2 watchdog timer via VPD variables | Johnny Lin |
2020-07-28 | mb/google/zork: Add Bluetooth reset gpios to devicetree | Rob Barnes |
2020-07-28 | mb/intel/tglrvp: Add PMC.MUX.CONx devices to devicetree for tglrvp_up4 | John Zhao |
2020-07-28 | mb/lenovo/{l520,t430}/acpi/platform.asl: Rearrange code | Peter Lemenkov |
2020-07-28 | mb/lenovo/*/acpi/superio.asl: Replace with GPLv2+ equivalent | Peter Lemenkov |
2020-07-28 | mb/google/dedede/var/madoo: Generate SPD ID for supported parts | Dtrain Hsu |
2020-07-28 | mb/google/dedede/var/madoo: Add audio support (ALC5682, MX98360A) | Dtrain Hsu |
2020-07-28 | mb/google/dedede/var/madoo: Configure USB port setting for Madoo | Dtrain Hsu |
2020-07-28 | mb/google/dedede/var/madoo: Configure GPIO for Madoo | Dtrain Hsu |
2020-07-28 | mb/google/volteer/var/voxel: Add memory configuration | Sheng-Liang Pan |
2020-07-28 | mb/google/volteer/var/volteer: I2C5 trackpad bus freq 400 kHz | Johnny Li |
2020-07-28 | mb/google/volteer2: Add support for passive USB-C daughterboard | Caveh Jalali |
2020-07-28 | mb/google/dedede/var/waddledee: Add discrete WiFi configuration | Karthikeyan Ramasubramanian |
2020-07-28 | mb/amd/mandolin: remove ACPI_FADT_RESET_REGISTER from fadt_flags | Felix Held |
2020-07-28 | mb/prodrive/hermes: Relocate device enable options | Felix Singer |
2020-07-28 | mb/prodrive/hermes: Add ME interface numbers to comments | Felix Singer |
2020-07-28 | mb/system76/lemp9: Relocate device enable options | Felix Singer |
2020-07-28 | mb/google/volteer: sync'ing todor with terrador | YH Lin |
2020-07-28 | mb/google/volteer: Create todor variant | YH Lin |
2020-07-28 | mb/ocp/deltalake: use common driver to configure GPIO | Bryant Ou |