summaryrefslogtreecommitdiff
path: root/src/mainboard/system76/adl
AgeCommit message (Collapse)Author
2024-06-07mb/**/hda_verb: Use `AZALIA_PIN_CFG_NC(0)`Angel Pons
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the same value and conveys additional information to the reader. Done with a bulk search and replace operation. Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-03mb/system76: Add SPDX ID to devicetree filesTim Crawford
Change-Id: I55f2730f7277a3c699b86ded5864e9690d92d518 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82700 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/system76: Exclude ramtop from CMOS checksumTim Crawford
Use the default position for ramtop and exclude it from the checksum. Fixes invalid checksum after caching ramtop causing things like disabling CSME to not work. Fixes: 10d2af04e754 ("mb/system76: Add space for ramtop in CMOS layout") Change-Id: If30df1e6f2735cf767856e42dfede3d17fe494eb Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81641 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30soc/intel/alderlake: Default to 512 for DIMM_SPD_SIZEFelix Singer
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total SPD size of 512 bytes. Set this as the default and remove the setting from mainboard Kconfigs. Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-04mb/system76/adl,rpl: Add 50ms timeout for PCIe 3.0 RPsTim Crawford
The FSP may fail to detect PCIe 4.0 devices in PCIe 3.0 slots on S3 resume. This issue has only been experienced on lemp12, and only with Samsung drives, but implies it could happen on other systems or with other drives as well. A timeout of 50ms is arbitrarily chosen. Tested on lemp12 with Samsung 980 PRO (FW: 3B2QGXA7, 5B2QGXA7) and 990 PRO (FW: 4B2QJXD7) drives. Change-Id: I4f44fc429c52e407b7566d6bb6dd31b2cf85c48d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80756 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-04mb/system76/adl: Remove duplicate PchHdaAudioLinkHdaEnableTim Crawford
This UPD is hooked up in devicetree since commit 854bd492fcfa ("mb/{system76,msi}: Enable PchHdaAudioLinkHdaEnable via devicetree"). As these boards were in development when the change happened, they still had the UPD set via romstage. Remove them now so they are only set in devicetree. Change-Id: I393e2c7b0134a31feae20f8992d7fd447ff7ee59 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80755 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2024-03-04mb/system76/adl,rpl: Enable PchHdaSdiEnableTim Crawford
Commit 4a58d14506ef ("soc/intel/alderlake: Hook up UPD PchHdaSdiEnable") and commit 2d482386182e ("soc/intel/alderlake: Set PchHdaSdiEnable for Alder Lake") hooked up this UPD in devicetree, causing the FSP default to be overridden (now disabled by default). Enable SDI to fix the following error: [DEBUG] PCI: 00:00:1f.3 init [DEBUG] azalia_audio: base = 0xbfbcc000 [DEBUG] azalia_audio: No codec! [DEBUG] PCI: 00:00:1f.3 init finished in 5 msecs Tested on gaze17-3050: Speaker output works again. Change-Id: Iceac1faec939ce9eea68c335929f96ec5f2bd132 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2024-02-18mb/*: Add SPDX headers for cmos.default filesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ib7beed7218f317bc2352b65a6191ef1cdaa0742d Reviewed-on: https://review.coreboot.org/c/coreboot/+/80597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2024-02-18mb/samsung to mb/up: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ied455ff29b151fb5f4bca26a189b1d4104d8cede Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80595 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-24mb/lenovo to mb/squared: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I4790adb41cb62c8c8dd44261a2926dfb6350955a Reviewed-on: https://review.coreboot.org/c/coreboot/+/80111 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-10-30mb/system76/adl/dt: Use comma separated list for arraysFelix Singer
In order to improve the readability of the settings, use a comma separated list to assign values to their indexes instead of repeating the option name for each index. Don't convert the settings for PCIe root ports as they should stay in the device scope of them. While on it, remove superfluous comments related to modified lines. Change-Id: I2f641ce1fc44a9d7c9f9c403d255997214021f47 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2023-08-26mb/system76: Enable DRIVERS_GENERIC_BAYHUB_LV2 to fix LTR issueJeremy Soller
Clevo started using OZ711LV2 for the SD card reader around the time of making its TGL boards. Without the driver, CPUs don't go to power states lower than C2 due to LTR not being programmed. After enabling the driver the CPU will go to C8 while the system is idle, giving significant power savings if the system is left on battery power. There is another issue with RPL where it only goes to C6 instead of C8. This may be due to the intel_idle driver in Linux (as of 6.5-rc6 mainline and 6.4.6 stable) not supporting RPL C-states. - tgl: Started being used with the Gazelle 3060 variant - adl: Used on all models - rpl: bonw15 does not have an SD card reader Change-Id: I85c60feb6dcae7d877e70a6c6f2d3a7b3296fa0e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
To help identify the licenses of the various files contained in the coreboot source, we've added SPDX headers to the top of all of the .c and .h files. This extends that practice to Makefiles. Any file in the coreboot project without a specific license is bound to the license of the overall coreboot project, GPL Version 2. This patch adds the GPL V2 license identifier to the top of all makefiles in the mainboard directory that don't already have an SPDX license line at the top. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic451e68b1ad9ccdf34484dd98bd7fca7e177ef22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68982 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-08-05mb/system76: Enable C10 reporting on systems using eSPITim Crawford
Report CPU C10 state over eSPI so that the EC can use Virtual Wires to detect if PECI can be used. Change-Id: I301361f35caee8ba1c3fd9227219603897add92b Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76910 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-31mb/system76/adl: Reset Realtek codec before configuringTim Crawford
Perform a codec reset to match all other System76 boards. This applies commit 705ebbea0477 ("mb/system76: Reset Realtek codec before configuring") to boards that were added later. Change-Id: I618cc042f1803d07bfc067d1999e1c44ab4a1fa9 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-07-31mb/system76/adl: Re-enable SATA DevSlpTim Crawford
CB:73353 switched ADL boards from using S0ix to S3. DevSlp can be reenabled now as it no longer breaks suspend. Change-Id: I618696833b7ed02e49c35d06021b730be91d879e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-31mb/system76: Leave TBT LSX0 as FSP configuredTim Crawford
Do not reconfigured LSX0 so that the FSP values are used. Change-Id: I76e2ab01a5e853e3c1ac78b471ea0aa87d703d52 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76751 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-25mb/system76/adl: gaze17,oryp10: Remove RTD3 configsTim Crawford
These boards do not actually support RTD3. The power GPIOs for components are connected to 3.3V and the reset GPIO is connected to `PLT_RST#`. Change-Id: Id5e318c388f669d6b2935dc98ae29485955e6e72 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-25mb/system76/adl: darp8,lemp11: Disable RTD3 on SATA portTim Crawford
After switching to S3, it was found that drives on the SATA port do not exit D3cold on S3 exit. Disable RTD3 on the port until the issue can be resolved. Avoids the following error in Linux: pcieport 0000:00:1d.0: Unable to change power state from D3cold to D0, device inaccessible Tested on darp8 with a Samsung 970 EVO or Crucial P5 in J_SSD1. Change-Id: Ib26f59db61acfbf9248cea379c197765d3d9c470 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76593 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18mb/system76/adl: Disable Intel ME by defaultTim Crawford
Disable the CSME by default now that S3 is used instead of S0ix. The CSME will not go into a low power state during S0ix when it is disabled. This prevents the CPU from reaching C10 and so increases the power usage during suspend compared to leaving CSME enabled. (This was measured to be a ~2W different on TGL-U.) In S3, the state of the CSME doesn't matter because the CPU will be off. Change-Id: I88c0aebdcc977f3ba9dd8f46a6abfaa7a4ae8eb6 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73354 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-18{ec,mb}/system76: Replace color keyboard logicTim Crawford
System76 EC since system76/ec@9ac513128ad9 detects if the keyboard is white or RGB backlit via `RGBKB-DET#` at runtime. Remove the Kconfig for the selection and update the ACPI methods for the new functionality. Change-Id: I60d3d165a58e30d2afc8736c0eb64dd90c8227ca Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76152 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18mb/system76/adl: Switch from S0ix to S3Tim Crawford
After fixing TPM logs clobbering other regions in CB:73297, S3 no longer causes cache issues resulting in power off after multiple suspends. This is required for disabling Intel CSME by default. Change-Id: I7eef4c883fd65db93dae81adabd895b2de90496a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76/{adl,tgl}: Add FMD filesTim Crawford
Replace `CBFS_SIZE` with FMD files to declare regions and sizes. This will be used to lock BIOS region (except SMMSTORE) on boot. `CBFS_SIZE` was incorrectly set to 10 MiB, so this also corrects the BIOS region size to match the FIT values. Change-Id: I0f068f4d9b376f12b46faa5bb0c6a08e6cb744d8 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76155 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Add space for ramtop in CMOS layoutTim Crawford
Fixes building when `USE_OPTION_TABLE` is selected. Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select CBFS SMBIOS hooksTim Crawford
Multiple users have requested to have the DMI values for product UUID and serial number be populated. Enable the drivers so that we may set them when flashing or updating firmware. Change-Id: I710363d9df626d51756a265f0099f26ef28411c2 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select TPM read delay on all boardsTim Crawford
The Infineon chip occasionally fails Startup or Resume. Adding the delay makes it work more reliably. Change-Id: I4a8f98633154888e2167a3d55192b86e13ffcb62 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76095 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/adl: Remove PL4 valuesTim Crawford
System76 EC since system76/ec@99dfbeaec3b8 sets PL4 values through PECI based on AC state for all boards. Remove the static PL4 values from coreboot since they won't be used. Ref: https://github.com/system76/ec/pull/353 Change-Id: I66bc547ef1b3419fc677fcbdd5ba5d8cc8e14189 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75333 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/adl: Add Gazelle 17 as a variantJeremy Soller
The gaze17 comes in 2 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet Controller - NVIDIA RTX 3060, using onboard I219-V Ethernet Controller Tested with a custom TianoCore UefiPayloadPkg payload. Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - MicroSD card reader - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting to Pop!_OS Linux 22.04 with kernel 6.2.6 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Discrete/Hybrid graphics: Requires NVIDIA driver - mDP/HDMI displays on 3060 variant: Requires NVIDIA driver - Detection of devices in TBT slot on boot - S3 suspend: MP init eventually fails Not tested: - Thunderbolt devices Change-Id: Ib12ac47e8f34004f72e6234039823530511baea7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-26mb/{system76,msi}: Enable PchHdaAudioLinkHdaEnable via devicetreeSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iae2dc0a934f0ea3ca59d8a811f1daeedb090a7bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/71717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
2023-04-02soc/intel/alderlake: Add ADL-P 4+4 with 28W TDPPatrick Rudolph
Add the 28W TDP version of the ADL-P with MCHID 0x4629. Verified that all 28W SoCs have the same PL1/PL2 defined in Intel document #655258 "12th Generation Intel Core Processors Datasheet, Volume 1 of 2". Fixes the error seen in coreboot log: [ERROR] unknown SA ID: 0x4629, skipped power Limit Configuration Change-Id: Iad676f083dfd1cceb4df9435d467dc0f31a63f80 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-03-04mb/system76/adl-p: Add Oryx Pro 10 as a variantTim Crawford
oryp10 is nearly identical to the oryp9, with the differences being: - Uses DDR5 RAM instead of DDR4 RAM - Uses Realtek ALC1306 instead of TI TAS5825M - Has an option for OLED display Change-Id: I0cf46cb5d10098dd31f0dc3c620db0c7e20ffba4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/adl: Add Oryx Pro 9 as a variantTim Crawford
The Oryx Pro 9 (oryp9) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - Both M.2 NVME SSD slots (with MZVL2500HCJQ) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - Discrete/Hybrid graphics - HDMI output (requires NVIDIA GPU) - Mini DisplayPort output (requires NVIDIA GPU) - Detection of devices in TBT slot on boot Change-Id: I8aac3e83f4423f444cb9ce8aa562ba465eb718c1 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04mb/system76/adl: Add Lemur Pro 11 as a variantTim Crawford
The Lemur Pro 11 (lemp11) is an Alder Lake-U board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - DIMM slot (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined headset + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.1.11 - Internal flashing with flashrom v1.2-1203-gf4ddd3234330 Not working: - On-board RAM: Requires CB:65567 - Detection of devices in TBT slot on boot Change-Id: Ic930df1ebacc8c7ef14dbb6c67a97eddb918b365 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-03-04{ec,mb}/system76: Move smbios_system_wakeup_typeTim Crawford
Move the implementation of smbios_system_wakeup_type from the mainboards to the EC for all models that use System76 EC (everything except KBL). Change-Id: Iaace234ca87e8a05eaa006a438d2c9eb13ce4d76 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-02-28mb/system76: Rename adl-p to adlTim Crawford
The directory holds boards other than ADL-P, such as ADL-U and ADL-H. Change-Id: I8e1b67f83d649cd07645a4a519ba1bf2f6f5e7c6 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 04:40:04 +0000