summaryrefslogtreecommitdiff
path: root/src/mainboard/starlabs
AgeCommit message (Collapse)Author
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
The parallel mp code picks up lapics at runtime, so remove it from all devicetrees that use this codebase. Change-Id: I5258a769c0f0ee4bbc4facc19737eed187b68c73 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69303 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-01-27mb/starlabs/starbook/adl: Fix the disable wireless CMOS optionSean Rhodes
The current CMOS option causes Linux to not boot, as the GRUB EFI loader will report an incorrect parameter. Update the CMOS option so that the corresponding UPD is changed when the wireless is set to disable, so that the root port for the wireless is also disabled. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I607d700319d6a58618ec95b3440e695c82dff196 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71896 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-27mb/starlabs/starbook/adl: Make Type-C USB a standard portSean Rhodes
Change the Type-C USB 2.0 interface to a standard port, as the Type-C macro will not work in Linux (dmesg says the cable is faulty), This makes the port work reliably in Linux, tested with: * Manjaro 21 * Ubuntu 22.04 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I6dbf31b6e4603685297e9e5203b0db6ac1b9e24a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72387 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-26mb/starlabs/starbook/Kconfig: Move MAINBOARD_HAS_TPM2 to STARBOOK_SERIESElyes Haouas
Change-Id: I5f91ae1b5904405edd797b57fbeb46609301295c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72434 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-25mb/starlabs/starbook/adl: Enable pin widget 0x18Sean Rhodes
Enable pin 0x18 which is used for the 3.5mm combo jack microphone detection. Also, disable 0x17 as it is not used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I05856627c073acaff49ea1ddc048a49a74b6268f Reviewed-on: https://review.coreboot.org/c/coreboot/+/71718 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-25mb/starlabs/starbook/adl: Change HDA verb hex values to lower caseSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I6a5c54ac46840fc1e03eb15b9ae2ddc34172ec08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72011 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-17mb/starlabs/starbook/adl: Fix alignmentSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4a3f871f2418438ef8e780a39935dfa2f86d8dbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/71895 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-16Revert "mb/starlabs/starbook/adl: Enable the PchHdaAudioLinkHdaEnable UPD"Martin L Roth
This reverts commit 0e945a3426782e3c054a920ff8be3cd865f697ba. Reason for revert: Breaks build. Need to be merged after https://review.coreboot.org/c/coreboot/+/71715 which adds the register that this patch enables Signed-off-by: Martin L Roth <gaumless@gmail.com> Change-Id: I0ac3fb1a44e23e19c9711287f3a6a8402a6ffd79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71283 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-16mb/starlabs/starbook/adl: Enable the PchHdaAudioLinkHdaEnable UPDSean Rhodes
Enable the PchHdaAudioLinkHdaEnable UPD so that the sound works. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id53c9a6495d584c374e89b76d1fd4258654b6f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2023-01-07mb/starlabs: Remove the bios_version functionSean Rhodes
Remove smbios_mainboard_bios_version so that the default CONFIG_LOCALVERSION can be used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia94f8683a54a98f4e3b1f51521db7e3ccb56ba48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-12-27mainboard/acpi: Replace constant "One" with actual numberFelix Singer
Change-Id: Id1078b14a805eea53d2a7c5a8183a5413f26e115 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71521 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-22mb/starlabs/*: Bind console serial output to EDK2_DEBUGSean Rhodes
Configure the UART port but only enable UART debug for EDK2 debug builds. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I54e1dc5768fd765254c7ede91eaa45842fed3bd6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69322 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-20mb/starlabs/starbook/adl: Set thermal trip based on power profileSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I07be0aa2144b7718e28f1f675978b4b4b92752ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/69492 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-17mb/starlabs/starbook: Add Alder Lake StarBook Mk VI variantBen-StarLabs
Tested using `edk2` from `github.com/starlabsltd/edk2/tree/uefipayload_202209`: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starbook-specification Signed-off-by: Ben-StarLabs <ben@starlabs.systems> Change-Id: Idc0c265a88b19cf9e89cc8ab3e8db9abd8cf8409 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65785 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2022-12-06mb/starlabs/lite/{glk,glkr}: Adjust THERMTRIP GPIOSean Rhodes
Modify the configuration of GPIO_74 (PMIC Thermal Trip Point) as in it's current configuration, it stops the laptop entering S5. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0e31f095ff42a03e3ea1496fe67d69b0f1763a3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/67418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-11-17mb/starlabs/starbook/kbl: Drop redundant option codeAngel Pons
Commit 9bbc039c457774dbeb44ea37ecc6507144d49b61 ("soc/intel/skylake: Hook up FSP hyper-threading setting to option API") already hooks up the `hyper_threading` CMOS option in SoC code, so there's no need to do it from mainboard code. Change-Id: I602452266a8465cced12454f800ea023f382ba6f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69522 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-07mb/starlabs/*: Enable the Mirror flag for boards that support itSean Rhodes
Enable the mirror flag for CML and TGL. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I51678bdb8d876d238076e12c6315a53c5da59628 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-29mb/starlabs/*: Change the local version to KconfigSean Rhodes
Replace the string with a Kconfig option Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib11ddd04c44f47b94f4fc9eaed278d554d581b0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/68937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-10-15mb/starlabs/lite/{glk,glkr}: Enable PMCSean Rhodes
Enable PMC in devicetree so that resources are allocated properly for it. Tested on StarLite Mk III & IV, and both can power on correctly. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib4384b55751a9979e470dd04f6814d4ca170ff34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67409 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-15mb/starlabs/lite: Reset XHCI before entering S5Sean Rhodes
Reset the XHCI controller prior to S5 to avoid XHCI preventing shutdown. Linux needs to put the XHCI into D3 before shutting down but the powerstate commands do not perform a reset. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3be70443eb85a7dff8055c9de0ca2fd89f4fc88d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67678 Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-13mb/starlabs/starbook/tgl: Remove PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4GSean Rhodes
PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is no longer needed so remove it. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I82841c2114ceb5e7a46ce228fce63d24822098d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68084 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-12mb/starlabs/starbook/tgl: Configure PMC muxSean Rhodes
Configure PMC mux in devicetree. Tested on StarBook Mk V with Ubuntu 22.04. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I297d5446e43357d97357f345668cf40dcd28502d Reviewed-on: https://review.coreboot.org/c/coreboot/+/68083 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-10-12mb/starlabs/starbook/tgl: Enable P2SBSean Rhodes
Enable the P2SB so that the SPI is discoverable by the OS. Change-Id: I49802f93a97a18ecc10f48d213619855728e1290 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67029 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-12mb/starlabs/starbook/tgl: Use chipset.cb aliasesSean Rhodes
Change-Id: Ie9655406c7afe7a22f131d35633a697c5bbde4e3 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-10-11mb/starlabs/starbook/kbl: Use chipset.cb aliasesSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2da15db3d7fba4396c74800e531476c108cafe17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67421 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-11mb/starlabs/starbook/cml: Enable SRAMSean Rhodes
Enable SRAM in devicetree so that resources are allocated properly for it. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1d7ee4f950b31f2be6fb7bd107b5fe54785ed81a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67420 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-11mb/starlabs/starbook/cml: Enable P2SBSean Rhodes
Enable the P2SB so that the SPI is discoverable by the OS. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ied7a6ea706e6da86182c109ab4813fa3fcebb1f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67419 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-06mb/starlabs/lite/glkr: Enable configuring Fast Charging on the Lite Mk IVSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I714867d455c4e0d01d6cb1cb9dc64669fb41100c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-06mb/starlabs/lite: Add variant specific cmos.layout and cmos.defaultSean Rhodes
Add variant specific cmos files, which avoid options like "FastCharge" existing in platforms that don't support such options. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I04264cf72d47ef719acfd144d8bf9acb0ceccc11 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-10-06mb/starlabs/starbook: Add variant specific cmos.layout and cmos.defaultSean Rhodes
Add variant specific cmos files, which avoid options like "Thunderbolt" existing in platforms that don't support such options. This change also removes entries that were never used, including: * smi_handler * usb_always_on Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I359e5c5bbf29eb474f2d3bc42a8e80afc0a5d38a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-20mb/starlabs/starbook/kbl: Correct USB port for BluetoothSean Rhodes
Previously, the Bluetooth interface worked when port 9 was enabled. Now, it works with port 5 enabled, which matches the schematic. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If783e60c8120adcd6522676cb3343ed46bf39d78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-09-13mb/starlabs/starbook/tgl: Tidy up the layoutSean Rhodes
Tidy up the layout to remove unnecessary sizes. This change also makes the flash start at 0x0 and increases the size of the FMAP to 0x1000. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I46663003857eb50271c6ad1da6c4e56c8f4bb6c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-09mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flagMatt DeVillier
Historically, ChromeOS devices have worked around the problem of OEMs using several different parts for touchpads/touchscreens by using a ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel) to indicate that the device may or may not be present, and that the driver should probe to confirm device presence. Since c636142b, coreboot now supports detection for i2c devices at runtime when creating the device entries for the ACPI/SSDT tables, rendering the 'probed' flag obsolete for touchpads. Switch all touchpads in the tree from using the 'probed' flag to the 'detect' flag. Touchscreens require more involved power sequencing, which will be done at some future time, after which they will switch over as well. TEST: build/boot at least one variant for each baseboard in the tree. Verify touchpad works under Linux and Windows. Verify only a single touchpad device is present in the ACPI tables. Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-08mb/starlabs/lite/{glk,glkr}: Enable SRAMSean Rhodes
Enable SRAM in devicetree so that resources are allocated properly for it. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ibdd2ee455f5bf6cd95bba6bab8689da664bfcf54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-08-24mb/starlabs/lite: Enable P2SBSean Rhodes
Enable the P2SB so that the SPI is discoverable by the OS. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9c12161d4868deae5b8900cfa2f42517a9f0b7e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-21mb/starlabs/*: Disable INTEL_LPSS_UART_FOR_CONSOLESean Rhodes
Disable INTEL_LPSS_UART_FOR_CONSOLE to stop debug output on UART 2. This decreases boot time on all boards by around 60%. TGL before: Total Time: 10,110,807 TGL after: Total Time: 3,851,641 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8f8d5cd46e87e7dafe0669b4a29c872b1789eb60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-21mb/starlabs/starbook/kbl: Update verb tableSean Rhodes
The ALC269 does not support the hardware equaliser, so remove the entries related to this, as they have no effect. Revert to the ALC269 defaults which work correctly with Linux. This also corrects the subsystem id from 0x10ec111e to 0x10ec10d0. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I82647f67730ec344591f7dbd759a421c116d4fdd Reviewed-on: https://review.coreboot.org/c/coreboot/+/66687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-08-19mb/starlabs/lite/glkr: Remove old comment from devicetreeSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib203451bb3da06efd1d3f6e48496b370d81f4b7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66196 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-19mb/starlabs/lite: Use chipset.cb aliasesSean Rhodes
GLKs chipset configures the devices, so use these aliases and remove the entries when they are identical. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic29e5305346c3b7fbf66b027754a9ddd16b16269 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66195 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-13mb/starlabs/starbook/tgl: Enable TPM Measured BootSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I251840b409dead62586cefe5856b6c544401ba30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-13mb/starlabs/starbook/kbl: Enable CRB_TPMSean Rhodes
Enable CRB_TPM to allow the use of the fTPM (Intel PTT). Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I7b69854ea636947480402ce12450f431028660a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-08-13payloads/tianocore: Rename TianoCore to edk2Sean Rhodes
coreboot uses TianoCore interchangeably with EDK II, and whilst the meaning is generally clear, it's not the payload it uses. EDK II is commonly written as edk2. coreboot builds edk2 directly from the edk2 repository. Whilst it can build some components from edk2-platforms, the target is still edk2. [1] tianocore.org - "Welcome to TianoCore, the community supporting" [2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and UEFI Platform Initialization (PI) specifications." Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-25mb/starlabs/lite: Add support for VBOOTSean Rhodes
Add the required files to support VBOOT for when it is enabled. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I083107b21c23f42193fc88aa174ec22850f45bc8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65705 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-22mb/starlabs/lite: Simplify the flash layoutSean Rhodes
Remove the sections that coreboot doesn't need to know about. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ide6c0d44f1f9ad9b962d2b8e14ac91e87f5ca031 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65453 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-13mb/starlabs/lite/{glk/glkr}: Remove Bluetooth USB portSean Rhodes
This reverts commit 0225af3c2ba661de82e15f163258605917ca28cf as it has no effect as the USB interface is configured by FSP S. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I20ca355eb1e088d7a7c8eacbc888ffc90833194b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-07mb/starlabs: Rename LabTop to StarBookSean Rhodes
The LabTop was renamed to StarBook since the release of the Mk V. This change keeps the directory name more relevant, as there are more boards using the name StarBook. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I3513fb56c1adf663ed7bcdade2cc52cd8c0d6f4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65640 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-07-073rdparty/blobs: Advance submodule pointerSean Rhodes
This contains the following commits: * d55c315 mb/starlabs: Remove padding from logo * 6412d38 mb/starlabs/starbook/cml: Update EC from 1.03 to 1.07 * fb72ac5 mb/starlabs/starbook/tgl: Update EC from 1.00 to 1.03 * cda5eaa mb/starlabs: Rename labtop to starbook * f16020a Revert "soc/mediatek/mt8186: Update SPM firmware to pcm_suspend_v0215… This also changes starlabs/labtop Kconfig to use the new paths for the EC binaries from the above commits. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I83143118af422276ee335ad4ef9eca76f54a9fc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-05mb/starlabs/labtop/tgl: Nit - minor format changeSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I068c6e46d85d869afc72280509a03d5ff682b917 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65618 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-05mb/starlabs/labtop: Define CCD Port in KconfigSean Rhodes
Define the CCD (aka "Webcam") USB port in the devicetree as it is used in multiple places. It is used in devtree to disable it based on the CMOS setting "webcam", and in the devicetree to configure the port tuning. This also corrects the port that is disabled on CML, from usb2_port[6] to usb2_port[3]. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I16e368fc7965f978f2302633122ba63038603c1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64704 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-05mb/starlabs/labtop/tgl: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. This also removes usb3_port[2] as it is not connected and fixes the labelling of usb3_port[0] and usb3_port[1]. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I7923fc00c36687a7f89d863eb0ea4e01a036502d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-05mb/starlabs/lite/glk: Update VbtSean Rhodes
Update the Vbt to disable the fixed mode feature, to allow for bootloader resolutions higher than 1920x1080. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ibd9850dcaef97a58c6694ee594014e9f16ae7f96 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-06-22mb/starlabs/lite/{glk/glkr}: Disable UFS deviceSean Rhodes
Disable 1d.0 UFS as it is not used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib392bc64db440ea3d98ee62536d5395587a3f6aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/65046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-06-21mb/starlabs/lite/{glk/glkr}: Disable Sata Port 1Sean Rhodes
Disable Sata Port 1 as it is not used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I93ecdaba5d1ce96ddcf3695edd7fb109054743e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64534 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-06-21mb/starlabs/lite/glkr: Don't configure GPIO's 147 through 156Sean Rhodes
These are configured by the TXE, so they do not need to be configured. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I13957992d637a53203b4328e39c0e6607e017891 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-21mb/starlabs/lite/glkr: Simplify GPIO macro'sSean Rhodes
Use shorter macro's to conifgure GPIO's. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I926aac8679f847cd963be07786e9fe2e4c63bda6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-21mb/starlabs/lite/glkr: Disconnect unused GPIO'sSean Rhodes
Disconnect GPIO's that are unused, or not connected. Also update comments that are vague or have errors. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1b071ec1d194f76ee78066396bac8dfff5ec851b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64651 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-20soc/intel/apollolake: Hook Up SataPortEnable to devicetreeSean Rhodes
Hook Up SataPortsEnable to the devicetree. As the default value is 0, set both [0] and [1] in all mainboards so they aren't affected. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ica8cf9484a6e6fe4362eabb8a9a59fcaf97c1bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64524 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-20mb/starlabs/labtop: Configure tcc_offset based on power_profile settingsSean Rhodes
Set tcc_offset value based on the power_profile value, ranging from 10 to 20 degrees. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I66fb266c1730833ff6e2dbf8ea39f23ee0878590 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glk: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. This change also corrects the daughterboard USB 3.0 port number. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib6a934a1e5e65fe387c63b78cbe80e45e97e0a8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64796 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-20mb/starlabs/lite/glkr: Correct the daughterboard USB 3.0 port numberSean Rhodes
The daughterboard USB 3.0 was set to port 3, which is incorrect. This patch corrects that to port 4. This fixes an issue where USB 3.0 devices are not detected when plugged in to this port. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I50f86dee1b512d0dd20d07e3ee17ebfa5e537bc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glkr: Correct USB port numbersSean Rhodes
The USB ports for the Motherboard USB 3.0 and Type-C were labelled incorrectly. This change swaps the ports, so they are labelled correctly and also corrects the over-current pins that they use. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I80484dc8bdd68dd72b3848720c790d59237a9f8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glkr: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2a7f50ca2b2001e83211e8eba56bfa929ecdfd74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite: Enable enhanced C-statesSean Rhodes
Tested on the StarLite Mk III & Mk IV with Zorin 16.2 Core. This resulted in a reduction in power consumption of approximately 3%. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I7b5f4e01bc786db02184b722c74fda7d0ca055be Reviewed-on: https://review.coreboot.org/c/coreboot/+/64709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite: Configure MMIO window for ECSean Rhodes
The Nuvoton EC requires a window to be opened for updates, so open this window only if the Nuvoton EC is present. Change-Id: Iaa45aa58749c4d0bfc77e60b52eab2bcb270f3ee Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/labtop/kbl: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib5fec81a7a04f2f5ab13784435944601902904d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/labtop/cml: Organise USB ports by hardware portSean Rhodes
Group the USB ports by hardware ports, rather than separate USB 2.0 and 3.0 interfaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie9bc6b3e20dddeb14cea195ef9a719432f66c6e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glk: Configure LPC IO registersSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I47523fae8d1cb0fbb972a82c43a992c9fb606ed4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-20mb/starlabs/lite/glkr: Configure LPC IO registersSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2d949af0086c231e27ac889c0aabd0d3e00c94fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/64984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-06-09mb/starlabs/lite: Disable Burst in Power Saver profileSean Rhodes
When the CMOS option `power_profile` is set to Power Saver, disable Burst. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4d9367306b3c0e83252cea3ee4c2733c8729d10c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-31mb/starlabs/lite/glk: Don't configure GPIO's 147 through 156Sean Rhodes
These are configured by the TXE, so they do not need to be configured. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia1bf4e32aa156a0e1a74df2f62eb31cdadb376a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31mb/starlabs/lite/glk: Simplify GPIO macrosSean Rhodes
Use shorter macros to configure GPIOs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I91961658dca0902080576134e63e6d8a7c78d711 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31mb/starlabs/lite/glk: Disconnect unused GPIOsSean Rhodes
Disconnect GPIOs that are unused or not connected. Also, update comments that are vague or have errors. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic83797b8a8e05eed99db0356f360a329f6fbf347 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31mb/starlabs/lite/{glk/glkr}: Configure prt0_gpioSean Rhodes
PERST_0 is not used, so set this to GPIO_PRT0_UDEF (undefined) to ensure that an undefined address is not added to GNVS. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iac9b116b2fa28824a89db28911188364dc9a1a53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28mb/starlabs/lite/glk: Remove unnecessary DPTF UPDSean Rhodes
The default for DPTF is off (0), so remove the entry that sets this to off. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0397ff6f71766a2f738ab2b71be298ef8f2b1c9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Remove unnecessary parametersSean Rhodes
Since using FSP 2.2.0.0, the defaults match the required settings so they no longer need to be specified. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie0e00cae67cb89b184392e97b8ec196d45ea5d91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28mb/starlabs/labtop: Add LabTop Mk IIISean Rhodes
Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/labtop-mk-iii-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia52566e06f50c0abcfb657044538db8e92564c36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ben McMillen <ben@starlabs.systems>
2022-05-28mb/starlabs/lite: Add Bluetooth USB interfaceSean Rhodes
Enable the USB port that is used by the Bluetooth interface on the CNVI. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2a330618c5f1c5fd5e3147cb6307c157b28070ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/64545 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/starlabs/lite: Remove webcam USB port from devicetreeSean Rhodes
Remove the Webcam USB port form the devicetree and handle it solely in devtree, which will enable or disable it based on the CMOS option. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9c89c7103aca5c3d42215122e9d94c83947b6fee Reviewed-on: https://review.coreboot.org/c/coreboot/+/64544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28mb/starlite/lite: Configure tcc_offset based on power_profile settingsSean Rhodes
Set tcc_offset value based on the power_profile value, ranging from 5 to 15 degrees. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id30bec9c095517884a7361226aed703b370f2207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Disable PMC PCI deviceSean Rhodes
The PMC is accessed via sideband registers, so the PCI device is not needed. Disabling it solves a bug where the laptop cannot be powered on without the charger connected. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I78f4aa4567dfc154ef5cb21f8746265259cd53e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64451 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/starlabs/lite/{glk/glkr}: Disable DPTF deviceSean Rhodes
DPTF is not used, so disable the corresponding PCI device. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9e4a3bada13dcabc1af3e1e5b3c215939f8239fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/64449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Remove subsystem device IDSean Rhodes
Remove the subsystem device ID for HDA devices, so that the correct Intel [8086:xxxx] is used. This was an old workaround for Windows that is no longer required with a new driver. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I63d6a4b0f19d400d683cab5dacca787d6c6a0fdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/64448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Decrease S3 assertion time to 28 msSean Rhodes
Set S3 assertion time to 28000us as this is sufficient time for rails to discharge. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4a14e7b30bb1fc4c0c1d3ff2f75069863458487f Reviewed-on: https://review.coreboot.org/c/coreboot/+/64447 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/starlabs/lite/glkr: Correct OverCurrent PinSean Rhodes
The USB ports use both OC0 and OC1. Whilst they work perfectly with OC_SKIP, set them to the correct pins. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If173b443d9770083d76519b854b513d8e47b9e71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-28mb/starlabs/lite/glk: Correct OverCurrent PinSean Rhodes
The OC pin was set to 0, which isn't connected. All USB ports are connected to OC1. This solves a strange issue where the Lite can't be powered on without the charger connected. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I700ddde291f0e4be6e3787e2da13f6d3ece736b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-26soc/intel/tigerlake: Hook up FSP hyper-threading setting to option APIFelix Singer
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting from the FSP to the option API so that related mainboards don't have to do that. Unless otherwise configured (e.g. the CMOS setting or overriden by the mainboard code), the value from the Kconfig setting `FSP_HYPERTHREADING` is used. Also, remove related code from the mainboard starlabs/laptop/tgl, since it is obsolete now. Change-Id: I49bbd4a776b4e6c55cb373bbf88a3ca076342e3e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-05-26soc/intel/cannonlake: Hook up FSP hyper-threading setting to option APIFelix Singer
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting from the FSP to the option API so that related mainboards don't have to do that. Unless otherwise configured (e.g. the CMOS setting or overriden by the mainboard code), the value from the Kconfig setting `FSP_HYPERTHREADING` is used. Also, remove related code from the following mainboards, since it is obsolete now. * siemens/chili * starlabs/laptop/cml Change-Id: I173b87da5ce76549672c50ba30204cd77be8b82f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-05-21mb/starlabs/lite/glk: Correct indendation in devicetreeSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I780e2765059ad7473fe5f33c50dd0d8a561151fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/64390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-05-12mb/starlabs/labtop: Enable Max Charge for CMLSean Rhodes
Enable the max charge feature for cml, as the EC supports it since Star Labs EC firmware 1.06. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I779a686960b63025fb5f40e826ed117f402a0b2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/64093 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-06mb/starlabs/lite: Change PMC from hidden to onStephen Edworthy
With the PMC set to hidden, on certain Operating Systems, including ZorinOS 16 and Manjaro 21.2.5, it would get stuck at a black screen when exiting from S3. With the PMC set to on, this issue no longer occurs. Signed-off-by: Stephen Edworthy <stephen@starlabs.systems> Change-Id: I0cf1be7f6919d974614f2196a0eb611cc40abe3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-06mb/starlabs/labtop: Remove subsystem device IDSean Rhodes
Remove the subsystem device ID for HDA devices, so that the correct Intel [8086:xxxx] is used. This was an old workaround for Windows that is no longer required with a new driver. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I50c03a2df06af3ef1939afd0739e083a9056557f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-04mb/starlabs/lite: Add Lite Mk IV variantSean Rhodes
Tested using upstream edk2: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starlite-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id1cf2846a139004e9bec7bb27e9afe07b7e6f64f Reviewed-on: https://review.coreboot.org/c/coreboot/+/62706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-01mb/starlabs/labtop: Disable legacy_8254_timer by defaultSean Rhodes
It was enabled due to known compatibility issues with Qubes OS. Since the release of R4.1.0, this issue is no longer present so it can be disabled. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iab6048dc93112b9365f0c2b46225569073eb32f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-04-01mb/starlabs/laptop: Enable rtd3 for SSD on TGLStephen Edworthy
Enabling rtd3 reduces power consumption when the SSD is idle. Tested and verified on the StarBook Mk V (TGL), using PowerTop on Manjaro 21.2.5 GNOME at 20% Brightness. Signed-off-by: Stephen Edworthy <stephen@starlabs.systems> Change-Id: I0d8aa185a322bb8d1aba51ccaab03c521cec2770 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-04-01mb/starlabs/labtop: Add CMOS defaults for EC functionsSean Rhodes
Set the CMOS defaults for EC related functions: * Function Lock = Enabled * Trackpad = Enabled * Keyboard Backlight Brightness = Off * Keyboard Backlight State = Enabled Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I528c30893d2af87584a09f23b982b5f36b37a873 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30mb/starlabs/lite: Move Verb Table to variant directorySean Rhodes
Move the verb table to variant directory to allow for different tables for different variants. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4260188057d1c3b4e6ea7c82f085fad0cc244881 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30ec/starlabs/merlin: Make EC function names genericSean Rhodes
Rather than using `ite_`, use `ec_` so the same functions can be called for different ECs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie61af233f731eb47772af1c82c6abdc515bc89cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-29src/mainboard/starlabs: Remove unused <option.h>Elyes Haouas
Found using: diff <(git grep -l '#include <option.h>' -- src/) <(git grep -l 'sanitize_cmos(\|get_uint_option(\|set_uint_option(\|get_uint_option(\|set_uint_option' -- src/) |grep "<" Change-Id: Ib79dfa73b8a30ae1b1e432318bd42e4e3d845af3 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-15soc/intel/tgl: move DIMM_SPD_SIZE from mb to SoC KconfigMichael Niewöhner
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to 512 in the SoC Kconfig and drop it from the mainboard Kconfigs. Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:27:35 +0000