| Age | Commit message (Collapse) | Author |
|---|
|
Enable PMC in devicetree so that resources are allocated properly
for it.
Tested on StarLite Mk III & IV, and both can power on correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib4384b55751a9979e470dd04f6814d4ca170ff34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67409
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reset the XHCI controller prior to S5 to avoid XHCI preventing shutdown.
Linux needs to put the XHCI into D3 before shutting down but the
powerstate commands do not perform a reset.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3be70443eb85a7dff8055c9de0ca2fd89f4fc88d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67678
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G is no longer needed so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I82841c2114ceb5e7a46ce228fce63d24822098d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68084
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure PMC mux in devicetree.
Tested on StarBook Mk V with Ubuntu 22.04.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I297d5446e43357d97357f345668cf40dcd28502d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68083
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Enable the P2SB so that the SPI is discoverable by the OS.
Change-Id: I49802f93a97a18ecc10f48d213619855728e1290
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67029
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie9655406c7afe7a22f131d35633a697c5bbde4e3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2da15db3d7fba4396c74800e531476c108cafe17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67421
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable SRAM in devicetree so that resources are allocated properly
for it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1d7ee4f950b31f2be6fb7bd107b5fe54785ed81a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67420
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the P2SB so that the SPI is discoverable by the OS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ied7a6ea706e6da86182c109ab4813fa3fcebb1f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67419
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I714867d455c4e0d01d6cb1cb9dc64669fb41100c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add variant specific cmos files, which avoid options like "FastCharge"
existing in platforms that don't support such options.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I04264cf72d47ef719acfd144d8bf9acb0ceccc11
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add variant specific cmos files, which avoid options like "Thunderbolt"
existing in platforms that don't support such options.
This change also removes entries that were never used, including:
* smi_handler
* usb_always_on
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I359e5c5bbf29eb474f2d3bc42a8e80afc0a5d38a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Previously, the Bluetooth interface worked when port 9 was enabled.
Now, it works with port 5 enabled, which matches the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If783e60c8120adcd6522676cb3343ed46bf39d78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Tidy up the layout to remove unnecessary sizes. This change also makes
the flash start at 0x0 and increases the size of the FMAP to 0x1000.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I46663003857eb50271c6ad1da6c4e56c8f4bb6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67542
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Historically, ChromeOS devices have worked around the problem of OEMs
using several different parts for touchpads/touchscreens by using a
ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel)
to indicate that the device may or may not be present, and that the
driver should probe to confirm device presence.
Since c636142b, coreboot now supports detection for i2c devices at
runtime when creating the device entries for the ACPI/SSDT tables,
rendering the 'probed' flag obsolete for touchpads. Switch all touchpads
in the tree from using the 'probed' flag to the 'detect' flag.
Touchscreens require more involved power sequencing, which will be done
at some future time, after which they will switch over as well.
TEST: build/boot at least one variant for each baseboard in the tree.
Verify touchpad works under Linux and Windows. Verify only a single
touchpad device is present in the ACPI tables.
Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable SRAM in devicetree so that resources are allocated properly
for it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibdd2ee455f5bf6cd95bba6bab8689da664bfcf54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67407
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Enable the P2SB so that the SPI is discoverable by the OS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9c12161d4868deae5b8900cfa2f42517a9f0b7e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Disable INTEL_LPSS_UART_FOR_CONSOLE to stop debug output on UART 2.
This decreases boot time on all boards by around 60%.
TGL before:
Total Time: 10,110,807
TGL after:
Total Time: 3,851,641
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8f8d5cd46e87e7dafe0669b4a29c872b1789eb60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The ALC269 does not support the hardware equaliser, so remove the
entries related to this, as they have no effect.
Revert to the ALC269 defaults which work correctly with Linux. This
also corrects the subsystem id from 0x10ec111e to 0x10ec10d0.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I82647f67730ec344591f7dbd759a421c116d4fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib203451bb3da06efd1d3f6e48496b370d81f4b7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66196
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GLKs chipset configures the devices, so use these aliases and remove
the entries when they are identical.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic29e5305346c3b7fbf66b027754a9ddd16b16269
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66195
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I251840b409dead62586cefe5856b6c544401ba30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Enable CRB_TPM to allow the use of the fTPM (Intel PTT).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7b69854ea636947480402ce12450f431028660a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
coreboot uses TianoCore interchangeably with EDK II, and whilst the
meaning is generally clear, it's not the payload it uses. EDK II is
commonly written as edk2.
coreboot builds edk2 directly from the edk2 repository. Whilst it
can build some components from edk2-platforms, the target is still
edk2.
[1] tianocore.org - "Welcome to TianoCore, the community supporting"
[2] tianocore.org - "EDK II is a modern, feature-rich, cross-platform
firmware development environment for the UEFI and UEFI Platform
Initialization (PI) specifications."
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4de125d92ae38ff8dfd0c4c06806c2d2921945ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65820
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add the required files to support VBOOT for when it is enabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I083107b21c23f42193fc88aa174ec22850f45bc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65705
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Remove the sections that coreboot doesn't need to know about.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ide6c0d44f1f9ad9b962d2b8e14ac91e87f5ca031
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65453
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 0225af3c2ba661de82e15f163258605917ca28cf as
it has no effect as the USB interface is configured by FSP S.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I20ca355eb1e088d7a7c8eacbc888ffc90833194b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The LabTop was renamed to StarBook since the release of the Mk V.
This change keeps the directory name more relevant, as there are
more boards using the name StarBook.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3513fb56c1adf663ed7bcdade2cc52cd8c0d6f4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65640
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This contains the following commits:
* d55c315 mb/starlabs: Remove padding from logo
* 6412d38 mb/starlabs/starbook/cml: Update EC from 1.03 to 1.07
* fb72ac5 mb/starlabs/starbook/tgl: Update EC from 1.00 to 1.03
* cda5eaa mb/starlabs: Rename labtop to starbook
* f16020a Revert "soc/mediatek/mt8186: Update SPM firmware to
pcm_suspend_v0215…
This also changes starlabs/labtop Kconfig to use the new paths for
the EC binaries from the above commits.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I83143118af422276ee335ad4ef9eca76f54a9fc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I068c6e46d85d869afc72280509a03d5ff682b917
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65618
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define the CCD (aka "Webcam") USB port in the devicetree as
it is used in multiple places. It is used in devtree to
disable it based on the CMOS setting "webcam", and in the
devicetree to configure the port tuning.
This also corrects the port that is disabled on CML, from
usb2_port[6] to usb2_port[3].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I16e368fc7965f978f2302633122ba63038603c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64704
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
This also removes usb3_port[2] as it is not connected and fixes the labelling of usb3_port[0] and usb3_port[1].
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7923fc00c36687a7f89d863eb0ea4e01a036502d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update the Vbt to disable the fixed mode feature, to allow for
bootloader resolutions higher than 1920x1080.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibd9850dcaef97a58c6694ee594014e9f16ae7f96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Disable 1d.0 UFS as it is not used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib392bc64db440ea3d98ee62536d5395587a3f6aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Disable Sata Port 1 as it is not used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I93ecdaba5d1ce96ddcf3695edd7fb109054743e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
These are configured by the TXE, so they do not need to be configured.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I13957992d637a53203b4328e39c0e6607e017891
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use shorter macro's to conifgure GPIO's.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I926aac8679f847cd963be07786e9fe2e4c63bda6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Disconnect GPIO's that are unused, or not connected.
Also update comments that are vague or have errors.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1b071ec1d194f76ee78066396bac8dfff5ec851b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64651
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hook Up SataPortsEnable to the devicetree. As the default value is 0,
set both [0] and [1] in all mainboards so they aren't affected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ica8cf9484a6e6fe4362eabb8a9a59fcaf97c1bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64524
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set tcc_offset value based on the power_profile value, ranging from 10
to 20 degrees.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I66fb266c1730833ff6e2dbf8ea39f23ee0878590
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
This change also corrects the daughterboard USB 3.0 port number.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib6a934a1e5e65fe387c63b78cbe80e45e97e0a8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64796
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The daughterboard USB 3.0 was set to port 3, which is incorrect. This
patch corrects that to port 4.
This fixes an issue where USB 3.0 devices are not detected when plugged
in to this port.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I50f86dee1b512d0dd20d07e3ee17ebfa5e537bc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The USB ports for the Motherboard USB 3.0 and Type-C were labelled
incorrectly. This change swaps the ports, so they are labelled correctly
and also corrects the over-current pins that they use.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I80484dc8bdd68dd72b3848720c790d59237a9f8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2a7f50ca2b2001e83211e8eba56bfa929ecdfd74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested on the StarLite Mk III & Mk IV with Zorin 16.2 Core. This
resulted in a reduction in power consumption of approximately 3%.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7b5f4e01bc786db02184b722c74fda7d0ca055be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Nuvoton EC requires a window to be opened for updates, so open
this window only if the Nuvoton EC is present.
Change-Id: Iaa45aa58749c4d0bfc77e60b52eab2bcb270f3ee
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib5fec81a7a04f2f5ab13784435944601902904d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Group the USB ports by hardware ports, rather than separate USB 2.0 and
3.0 interfaces.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie9bc6b3e20dddeb14cea195ef9a719432f66c6e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I47523fae8d1cb0fbb972a82c43a992c9fb606ed4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2d949af0086c231e27ac889c0aabd0d3e00c94fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When the CMOS option `power_profile` is set to Power Saver, disable
Burst.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4d9367306b3c0e83252cea3ee4c2733c8729d10c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
These are configured by the TXE, so they do not need to be configured.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia1bf4e32aa156a0e1a74df2f62eb31cdadb376a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Use shorter macros to configure GPIOs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I91961658dca0902080576134e63e6d8a7c78d711
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Disconnect GPIOs that are unused or not connected.
Also, update comments that are vague or have errors.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic83797b8a8e05eed99db0356f360a329f6fbf347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
PERST_0 is not used, so set this to GPIO_PRT0_UDEF (undefined) to
ensure that an undefined address is not added to GNVS.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac9b116b2fa28824a89db28911188364dc9a1a53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
The default for DPTF is off (0), so remove the entry that sets this to
off.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0397ff6f71766a2f738ab2b71be298ef8f2b1c9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Since using FSP 2.2.0.0, the defaults match the required settings so
they no longer need to be specified.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie0e00cae67cb89b184392e97b8ec196d45ea5d91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Tested using MrChromeBox's `uefipayload_202107` branch:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/labtop-mk-iii-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia52566e06f50c0abcfb657044538db8e92564c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ben McMillen <ben@starlabs.systems>
|
|
Enable the USB port that is used by the Bluetooth interface on the CNVI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2a330618c5f1c5fd5e3147cb6307c157b28070ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64545
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the Webcam USB port form the devicetree and handle it solely in
devtree, which will enable or disable it based on the CMOS option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9c89c7103aca5c3d42215122e9d94c83947b6fee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Set tcc_offset value based on the power_profile value, ranging from 5
to 15 degrees.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id30bec9c095517884a7361226aed703b370f2207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The PMC is accessed via sideband registers, so the PCI device is not
needed.
Disabling it solves a bug where the laptop cannot be powered on
without the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I78f4aa4567dfc154ef5cb21f8746265259cd53e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64451
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPTF is not used, so disable the corresponding PCI device.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9e4a3bada13dcabc1af3e1e5b3c215939f8239fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Remove the subsystem device ID for HDA devices, so that the correct
Intel [8086:xxxx] is used. This was an old workaround for Windows
that is no longer required with a new driver.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I63d6a4b0f19d400d683cab5dacca787d6c6a0fdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Set S3 assertion time to 28000us as this is sufficient time for
rails to discharge.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4a14e7b30bb1fc4c0c1d3ff2f75069863458487f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64447
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The USB ports use both OC0 and OC1. Whilst they work perfectly with
OC_SKIP, set them to the correct pins.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If173b443d9770083d76519b854b513d8e47b9e71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The OC pin was set to 0, which isn't connected. All USB ports are
connected to OC1.
This solves a strange issue where the Lite can't be powered on without
the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I700ddde291f0e4be6e3787e2da13f6d3ece736b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Also, remove related code from the mainboard starlabs/laptop/tgl, since
it is obsolete now.
Change-Id: I49bbd4a776b4e6c55cb373bbf88a3ca076342e3e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Also, remove related code from the following mainboards, since it is
obsolete now.
* siemens/chili
* starlabs/laptop/cml
Change-Id: I173b87da5ce76549672c50ba30204cd77be8b82f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I780e2765059ad7473fe5f33c50dd0d8a561151fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Enable the max charge feature for cml, as the EC supports it since
Star Labs EC firmware 1.06.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I779a686960b63025fb5f40e826ed117f402a0b2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64093
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the PMC set to hidden, on certain Operating Systems,
including ZorinOS 16 and Manjaro 21.2.5, it would get stuck
at a black screen when exiting from S3.
With the PMC set to on, this issue no longer occurs.
Signed-off-by: Stephen Edworthy <stephen@starlabs.systems>
Change-Id: I0cf1be7f6919d974614f2196a0eb611cc40abe3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Break TPM related Kconfig into the following dimensions:
TPM transport support:
config CRB_TPM
config I2C_TPM
config SPI_TPM
config MEMORY_MAPPED_TPM (new)
TPM brand, not defining any of these is valid, and result in "generic" support:
config TPM_ATMEL (new)
config TPM_GOOGLE (new)
config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE)
config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE)
What protocol the TPM chip supports:
config MAINBOARD_HAS_TPM1
config MAINBOARD_HAS_TPM2
What the user chooses to compile (restricted by the above):
config NO_TPM
config TPM1
config TPM2
The following Kconfigs will be replaced as indicated:
config TPM_CR50 -> TPM_GOOGLE
config MAINBOARD_HAS_CRB_TPM -> CRB_TPM
config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL
config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE
config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM
config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Remove the subsystem device ID for HDA devices, so that the correct
Intel [8086:xxxx] is used. This was an old workaround for Windows
that is no longer required with a new driver.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I50c03a2df06af3ef1939afd0739e083a9056557f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested using upstream edk2:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/starlite-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id1cf2846a139004e9bec7bb27e9afe07b7e6f64f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It was enabled due to known compatibility issues with Qubes OS.
Since the release of R4.1.0, this issue is no longer present so
it can be disabled.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iab6048dc93112b9365f0c2b46225569073eb32f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Enabling rtd3 reduces power consumption when the SSD is idle.
Tested and verified on the StarBook Mk V (TGL), using PowerTop
on Manjaro 21.2.5 GNOME at 20% Brightness.
Signed-off-by: Stephen Edworthy <stephen@starlabs.systems>
Change-Id: I0d8aa185a322bb8d1aba51ccaab03c521cec2770
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Set the CMOS defaults for EC related functions:
* Function Lock = Enabled
* Trackpad = Enabled
* Keyboard Backlight Brightness = Off
* Keyboard Backlight State = Enabled
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I528c30893d2af87584a09f23b982b5f36b37a873
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move the verb table to variant directory to allow for different tables
for different variants.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4260188057d1c3b4e6ea7c82f085fad0cc244881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Rather than using `ite_`, use `ec_` so the same functions
can be called for different ECs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ie61af233f731eb47772af1c82c6abdc515bc89cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <option.h>' -- src/) <(git grep -l 'sanitize_cmos(\|get_uint_option(\|set_uint_option(\|get_uint_option(\|set_uint_option' -- src/) |grep "<"
Change-Id: Ib79dfa73b8a30ae1b1e432318bd42e4e3d845af3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
All TGL mainboards are setting DIMM_SPD_SIZE to 512. Thus, default to
512 in the SoC Kconfig and drop it from the mainboard Kconfigs.
Change-Id: I9fd947b61c984e10bd5fba20b73280b08623a008
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62766
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch modifies `memcfg_init` and `variant_memory_init`functions
argument from FSP_M_CONFIG to FSPM_UPD.
This change in `memcfg_init()` argument will help to update the
architectural FSP-M UPDs from common code blocks rather than going
into SoC and/or mainboard implementation.
BUG=b:200243989
BRANCH=firmware-brya-14505.B
TEST=Able to build and boot redrix without any visible failure/errors.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3002dd5c2f3703de41f38512976296f63e54d0c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Pull GPP_D16 to low when suspending, otherwise it will remain active
and use power.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2cbe7caf66e8d8c27414aca3b74416c2b8115ea1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Don't return 0x00 when running MWAK as it is not needed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ic62eab8ae5319aff37c61fc29d701d9a36ada919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove the dependency on Arg0 so PTS always runs.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I96c44397d62848231039330a32de781f75bb56bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0324747f936be27ee39e586124005530d5c424b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Guard Max Charge EC write in Kconfig so it's only used on
platforms that support it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7be39cd9543c8253d53070950edc6908a21e864a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Tested using MrChromeBox's `uefipayload_202107` branch:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/labtop-mk-iv-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Idbaa907dc38dc521961806132f21b7a90324ec9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58428
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iddbf2022d03735d6a0e6d098c21643f5fdc875f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Reconfigure the GPIO's so that they are configured correctly.
The original configuration was based on the AMI firmware, and
whilst it worked, it wasn't optimal.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I27ecf066685f2a81ac884a9f276c518544449443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Reconfigure the CNVi GPIO's so that they are configured correctly.
The original configuration was based on the AMI firmware, and
whilst it worked, it wasn't optimal.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9fc9963e91da0267c8740fee20a3ec41895b4953
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Update trackpad GPIO to avoid IRQ Storm, that causes high power
consumption when idling or in S3.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieee27bd9079617ab95f4f1e27ef98b49e89e5b41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Configure the TPM IRQ GPIO for TGL (StarBook Mk V) so that the
hardware TPM can be used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ife88075e70184b46e69f2e24c70b85ec254edd64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60756
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't configure ESPI GPIOs as the default values are correct.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I052fbfccd075d19340d3e27ad0c62965c80badaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
|
|
Rework edkii makefile so that the various build options are
unified between CorebootPayloadPkg, uefipayload_202107 and
upstream.
This sets the project directory based on the git repository name
i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox
Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit
ID without a branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
|
|
Disconnect all GPIO's that aren't connected to anything.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2050da62f73c0f99fbfef013c22e35225cc480c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add comment for each GPIO details its endpoint based
on the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia3678274dcd52285019fb3cf8ccd22617268ce1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4a81fd58df468e2711108a3243bf116e02986316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add the UPD PcieRpSlotImplemented as devicetree option. To keep the PI
bit set for any slots of already existing boards, add set the option
PcieRpSlotImplemented=1 where appropriate.
Change-Id: Ia6f685df3c22c74ae764693329a69817bf3cd01d
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
