summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens
AgeCommit message (Expand)Author
2023-09-14mb/siemens/mc_ehl3: Enable PWM passthrough mode on PTN3460Mario Scheithauer
2023-09-13mb/siemens/mc_ehl5: Enable PWM passthrough mode on PTN3460Mario Scheithauer
2023-09-05mb/siemens/fa_ehl: Process LPDDR4 SPD files and add MT53E512M32D1NP SPDJohannes Hahn
2023-09-02mb/siemens/mc_apl2: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
2023-08-24mb/siemens/fa_ehl: Remove RTC RV3028C7Johannes Hahn
2023-08-24mb/siemens/fa_ehl: Remove TPMJohannes Hahn
2023-08-24mb/siemens/fa_ehl: Remove NC_FPGAJohannes Hahn
2023-08-24mainboard/siemens/fa_ehl: Add new mainboard based on mc_ehl2Johannes Hahn
2023-08-06mainboard: Add SPDX license headers to MakefilesMartin Roth
2023-07-13mb/siemens/mc_ehl4: Change GPIO GPP_B5 polarity for DRAM populationMario Scheithauer
2023-07-06mb/siemens/mc_ehl4: Make DRAM population depending on GPIO GPP_B5Mario Scheithauer
2023-07-06mb/siemens/mc_ehl: Make DRAM population configurableMario Scheithauer
2023-07-03mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 0Jan Samek
2023-07-03mb/siemens/mc_apl1: Fix wrong register maskingMario Scheithauer
2023-07-03mb/siemens/mc_apl5: Correct the Tx signal from SATA port 0Mario Scheithauer
2023-07-03mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'Mario Scheithauer
2023-07-03mb/siemens/{mc_apl3,mc_apl5,mc_apl6}: Remove TX_DWORD3 macroMario Scheithauer
2023-06-19soc/intel/apollolake: Switch to snake case for DisableSataSalpSupportMario Scheithauer
2023-06-15mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 1Jan Samek
2023-06-02soc/intel/apollolake: Switch to snake case for SataPortsEnableMario Scheithauer
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Use SSD type for SATA portsMario Scheithauer
2023-06-01mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Limit SATA speed to Gen 2Mario Scheithauer
2023-05-24mb/siemens/mc_ehl1: Enable pi608gp I2C driverJan Samek
2023-05-24mb/siemens/mc_ehl4: Double payload size to 256 bytes for PCIe RP #2, #3Mario Scheithauer
2023-05-12mb/siemens/mc_ehl5: Add PTN3460 eDP-to-LVDS bridgeMario Scheithauer
2023-05-12mb/siemens/mc_ehl5: Add new board variant based on mc_ehl2Mario Scheithauer
2023-05-11mb/siemens/mc_apl5: Set Full Reset Bit into Reset Control RegisterMario Scheithauer
2023-05-11mb/siemens/mc_apl: Correct multi-line comment style for all Siemens APL BoardsMario Scheithauer
2023-05-11mb/siemens/mc_ehl: Remove '_' from mainboard model option in Kconfig.nameMario Scheithauer
2023-05-11mb/siemens/mc_ehl1: Use SSD type for SATA portsMario Scheithauer
2023-05-04mb/siemens/mc_ehl: Remove subdir 'spd' from MakefileMario Scheithauer
2023-05-01mb/siemens/mc_ehl: Remove wrong comment regarding spd.binWerner Zeh
2023-04-26mb/siemens/mc_ehl4: Enable SD cardMario Scheithauer
2023-04-26mb/siemens/mc_ehl4: Switch RTC type and connectionMario Scheithauer
2023-04-26mb/siemens/mc_ehl4: Adjust USB settingsMario Scheithauer
2023-04-26mb/siemens/mc_ehl4: Change NC FPGA PCIe RP connection for POST codesMario Scheithauer
2023-04-26mb/siemens/mc_ehl4: Adjust GPIOsMario Scheithauer
2023-04-11mb/siemens/mc_ehl2: Fix GPIO settings for latest HW revisionMario Scheithauer
2023-03-23soc/intel/elkhartlake: Define DIMM_SPD_SIZE in SoC KconfigMichał Żygowski
2023-03-21mb/siemens/mc_ehl4: Limit PCIe root port #4 and #5 speed to Gen 1Mario Scheithauer
2023-03-21mb/siemens/mc_ehl4: Enable PCIe devicesMario Scheithauer
2023-03-03drv/i2c/ptn3460: Add 'mainboard' prefix to mainboard-level callbacksJan Samek
2023-03-02mb/siemens/mc_ehl*: Correct comment in gpio.cMario Scheithauer
2023-03-02mb/siemens/mc_ehl4: Remove TPM from devicetree and KconfigMario Scheithauer
2023-03-02mb/siemens/mc_ehl: Move TPM Kconfig switches to variantsMario Scheithauer
2023-03-02mb/siemens/mc_ehl2: Set RGMII output impedance manuallyMario Scheithauer
2023-03-02mb/siemens/mc_ehl4: Add new board variant based on mc_ehl1Mario Scheithauer
2023-03-02mb/siemens/mc_ehl2: Fix GPIO settingsMario Scheithauer
2023-03-01mb/siemens/mc_ehl3/lcd_panel.c: Set LVDS re-power delay to 1 sJan Samek
2023-02-03soc/intel/apl: Move cpu cluster to chipset.cbArthur Heymans
2023-02-02drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constantJan Samek
2023-01-30src/mainboard: Remove unnecessary space after castsElyes Haouas
2023-01-30mb/siemens/mc_ehl3/gpio.c: Disable PSE GBE0 GPIOJan Samek
2023-01-30mb/*: Remove lapic from devicetreeArthur Heymans
2023-01-27drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfgJan Samek
2023-01-27mb/siemens/mc_apl1/var/mc_apl5: Enable early POSTJan Samek
2023-01-22mb/siemens/mc_apl1/var/mc_apl6: Enable early POSTJan Samek
2023-01-22mb/siemens/mc_apl1: Move POST logic to mainboard levelJan Samek
2023-01-20mb/siemens: Unify and clean lcd_panel.c coding styleJan Samek
2023-01-20mb/siemens/mc_ehl3: Add PTN3460 eDP-to-LVDS bridgeJan Samek
2023-01-19mb/siemens/mc_ehl3: Use device/mmio.h instead of device/pci_ops.hJan Samek
2023-01-18mb/siemens/mc_ehl: Remove '_' from mc_ehl3 part numberJan Samek
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
2023-01-11mb/siemens/mc_ehl1: Enable real-time tuningWerner Zeh
2023-01-10mb/siemens/mc_ehl1: Limit SATA speed to Gen 2Werner Zeh
2022-12-23mb/siemens/mc_apl{4,7}: Limit I2C bus speed to 100 kHz on bus 7Werner Zeh
2022-12-21mb/siemens/mc_ehl3/devicetree.cb: Remove TSN GbE 0Jan Samek
2022-12-21mb/siemens/mc_ehl3/mainboard.c: Remove XIO2001 register tweaksJan Samek
2022-12-17mb/siemens/mc_ehl3/devicetree.cb: Adapt PCIe root port settingsJan Samek
2022-12-17mb/siemens/mc_ehl3: Add board variant based on mc_ehl2Jan Samek
2022-12-10treewide: Include <device/mmio.h> instead of <arch/mmio.h>Elyes Haouas
2022-12-09mb/siemens/*/Makefile.inc: Remove path to non-existent folderElyes Haouas
2022-12-01mb/siemens/mc_ehl2: Disable GSPI2 controllerMario Scheithauer
2022-11-25mb/siemens/mc_ehl2: Disable L1 prefetcherMario Scheithauer
2022-11-24mb/siemens/mc_ehl2: Enable downshift for Marvell PHYsMario Scheithauer
2022-11-24mb/siemens/mc_ehl2: Enable Marvell PHY interruptMario Scheithauer
2022-11-24mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driverMario Scheithauer
2022-11-18mb/siemens/mc_ehl2/devicetree.cb: Use RV3028 bus_speed instead of dummy i2c d...Jan Samek
2022-11-09mb/siemens/mc_ehl2: Provide I2C timing parameter for SSDTWerner Zeh
2022-11-09mb/siemens/mc_ehl2: Add dummy I2C devices to limit the I2C speed in OSWerner Zeh
2022-10-29mb/siemens/mc_ehl: Remove spd.bin from CBFSWerner Zeh
2022-10-27mb/siemens/mc_apl2: Enable early POST through NC_FPGAJan Samek
2022-10-25mb/siemens/mc_ehl1: Disable L1 prefetcherWerner Zeh
2022-10-22mb/siemens/mc_ehl: Add FIVR config to devicetree for all variantsWerner Zeh
2022-10-22mb/siemens/mc_apl*: Enable early PCI bridge before FSP-MAngel Pons
2022-10-07mb/siemens/mc_ehl2: Use preset driver strength for SD-CardMario Scheithauer
2022-09-22mb/siemens/mc_apl7: Enable libgfxinit for the boardJan Samek
2022-09-22mb/siemens/mc_apl7/Kconfig: Enable PTN3460 early initJan Samek
2022-09-19mb/siemens/mc_apl1: Do not wait for legacy devices on mc_apl7Werner Zeh
2022-09-07mb/siemens/mc_ehl2: Limit SD-Card speed modes to DDR50Werner Zeh
2022-09-07mb/siemens/mc_ehl2: Set I2C bus 1 speed to 100 kHzWerner Zeh
2022-09-07mb/siemens/mc_ehl2: Change to new RTC RV3028-C7Werner Zeh
2022-09-07mb/siemens/mc_ehl: Move RTC Kconfig option to variant levelWerner Zeh
2022-08-16mb/**/dsdt.asl: Drop misleading "OEM revision" commentAngel Pons
2022-08-16mb/**/dsdt.asl: Drop superfluous commentsAngel Pons
2022-06-27mb/siemens/mc_apl7: Disable VBOOT and TPMUwe Poeche
2022-06-23mb/siemens/mc_apl1: Add new mainboard variant mc_apl7Uwe Poeche
2022-06-20soc/intel/apollolake: Hook Up SataPortEnable to devicetreeSean Rhodes
2022-05-26soc/intel/cannonlake: Hook up FSP hyper-threading setting to option APIFelix Singer
2022-05-23mb/siemens/mc_ehl: Disable RAPLUwe Poeche
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 11:05:16 +0000