Age | Commit message (Expand) | Author |
2023-06-02 | soc/intel/apollolake: Switch to snake case for SataPortsEnable | Mario Scheithauer |
2023-06-01 | mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Use SSD type for SATA ports | Mario Scheithauer |
2023-06-01 | mb/siemens/{mc_apl2,mc_apl5,mc_apl6}: Limit SATA speed to Gen 2 | Mario Scheithauer |
2023-05-11 | mb/siemens/mc_apl5: Set Full Reset Bit into Reset Control Register | Mario Scheithauer |
2023-05-11 | mb/siemens/mc_apl: Correct multi-line comment style for all Siemens APL Boards | Mario Scheithauer |
2023-03-03 | drv/i2c/ptn3460: Add 'mainboard' prefix to mainboard-level callbacks | Jan Samek |
2023-02-03 | soc/intel/apl: Move cpu cluster to chipset.cb | Arthur Heymans |
2023-02-02 | drv/i2c/ptn3460: Use PTN_EDID_LEN instead of constant | Jan Samek |
2023-01-30 | src/mainboard: Remove unnecessary space after casts | Elyes Haouas |
2023-01-30 | mb/*: Remove lapic from devicetree | Arthur Heymans |
2023-01-27 | drivers/i2c/ptn3460: Use cb_err in mb_adjust_cfg | Jan Samek |
2023-01-27 | mb/siemens/mc_apl1/var/mc_apl5: Enable early POST | Jan Samek |
2023-01-22 | mb/siemens/mc_apl1/var/mc_apl6: Enable early POST | Jan Samek |
2023-01-22 | mb/siemens/mc_apl1: Move POST logic to mainboard level | Jan Samek |
2023-01-20 | mb/siemens: Unify and clean lcd_panel.c coding style | Jan Samek |
2022-12-23 | mb/siemens/mc_apl{4,7}: Limit I2C bus speed to 100 kHz on bus 7 | Werner Zeh |
2022-12-09 | mb/siemens/*/Makefile.inc: Remove path to non-existent folder | Elyes Haouas |
2022-10-27 | mb/siemens/mc_apl2: Enable early POST through NC_FPGA | Jan Samek |
2022-10-22 | mb/siemens/mc_apl*: Enable early PCI bridge before FSP-M | Angel Pons |
2022-09-22 | mb/siemens/mc_apl7: Enable libgfxinit for the board | Jan Samek |
2022-09-22 | mb/siemens/mc_apl7/Kconfig: Enable PTN3460 early init | Jan Samek |
2022-09-19 | mb/siemens/mc_apl1: Do not wait for legacy devices on mc_apl7 | Werner Zeh |
2022-08-16 | mb/**/dsdt.asl: Drop misleading "OEM revision" comment | Angel Pons |
2022-08-16 | mb/**/dsdt.asl: Drop superfluous comments | Angel Pons |
2022-06-27 | mb/siemens/mc_apl7: Disable VBOOT and TPM | Uwe Poeche |
2022-06-23 | mb/siemens/mc_apl1: Add new mainboard variant mc_apl7 | Uwe Poeche |
2022-06-20 | soc/intel/apollolake: Hook Up SataPortEnable to devicetree | Sean Rhodes |
2022-05-18 | intel/common/block: Provide RAPL and min clock ratio switches in common | Uwe Poeche |
2022-04-21 | tpm: Refactor TPM Kconfig dimensions | Jes B. Klinke |
2022-03-07 | src: Make PCI ID define names shorter | Felix Singer |
2022-02-22 | mb/siemens/mc_apl2: Enable PCI device for I2C bus 0 | Werner Zeh |
2022-02-12 | mb/siemens/mc_apl{2,4,5,6}: Enable recovery MRC cache | Werner Zeh |
2022-02-01 | mb/siemens/{mc_apl1,...,mc_apl6}: Disable SATA ALPM support | Mario Scheithauer |
2021-11-04 | treewide: Replace bad uses of `find_resource` | Angel Pons |
2021-07-26 | mb/*: Specify type of `VARIANT_DIR` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `FMDFILE` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `DEVICETREE` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `MAINBOARD_PART_NUMBER` once | Angel Pons |
2021-07-26 | mb/*: Specify type of `MAINBOARD_DIR` once | Angel Pons |
2021-07-23 | mb/siemens/mc_apl{1,2,3,5,6}: Use PCI_ALLOW_BUS_MASTER_ANY_DEVICE | Werner Zeh |
2021-07-21 | mb/siemens/mc_apl{1,2,3,5,6}: Set PCI bus master bit only if allowed | Werner Zeh |
2021-06-04 | mb/siemens/mc_apl2: Disable unused I2C controllers | Werner Zeh |
2021-06-04 | mb/siemens/mc_apl{1,2,3,5,6}: Provide I2C timings for 400 kHz | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl{1,2,3,5,6}: Disable ACPI-support for RX6110 | Werner Zeh |
2021-05-30 | mb/siemens/mc_apl1: Move gpio.c from baseboard to mc_apl1 | Mario Scheithauer |
2021-05-30 | mb/siemens/{mc_apl2,...,mc_apl6}: Do early UART pad configuration | Mario Scheithauer |
2021-05-02 | mb/siemens/mc_apl{1,2,3,5,6}: Tune I2C frequency | Werner Zeh |
2021-02-16 | mb/siemens/mc_apl1/variants/mc_apl2/mainboard.c: Clean includes | Elyes HAOUAS |
2021-02-15 | src/mb: Remove unused <console/console.h> | Elyes HAOUAS |
2021-02-10 | mb/siemens/mc_apl2: Switch I2C bus for RX6110SA | Mario Scheithauer |
2021-02-02 | mb/siemens/mc_apl1: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-27 | ACPI: Add top-level ASL | Kyösti Mälkki |
2021-01-20 | mb/siemens/{mc_apl1,...,mc_apl6}: Configure FSP-S UPDs | Mario Scheithauer |
2021-01-15 | mb/siemens/mc_apl1: do LPC/eSPI pad configuration at board-level | Michael Niewöhner |
2020-11-30 | mb/siemens/mc_apl1: Deduplicate wait_for_legacy_dev() | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1: Simplify is_mac_adr_valid() logic | Angel Pons |
2020-11-30 | drivers/intel/i210: Define MAC_ADDR_LEN | Angel Pons |
2020-11-30 | mb/siemens/mc_apl1/mainboard.c: Refactor loop body | Angel Pons |
2020-11-23 | mb/siemens/mc_apl1: Use `pci_or_config16` function | Angel Pons |
2020-10-13 | {src/mb,util/autoport}: Use macro for DSDT revision | Elyes HAOUAS |
2020-10-05 | mb/siemens/mc_apl6: Enable eMMC | Mario Scheithauer |
2020-09-19 | apollolake boards: Enable CSE in devicetree | Subrata Banik |
2020-09-10 | mb/siemens/mc_apl2/gpio: Fix code style | Maxim Polyakov |
2020-09-10 | mb/siemens/mc_apl2/gpio: Undo set DRIVER for GPO | Maxim Polyakov |
2020-09-09 | apollolake: Define MAX_CPUS at SoC scope | Angel Pons |
2020-09-09 | apollolake: Limit MAX_CPUS to 4 | Angel Pons |
2020-07-09 | mb/siemens/mc_apl1: Use OPCODE menu set up of fast SPI driver | Werner Zeh |
2020-06-30 | src: Remove whitespaces before tabs | Elyes HAOUAS |
2020-06-19 | Kconfig: Escape variable to accommodate new Kconfig versions | Patrick Georgi |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-04-04 | mainboard/siemens: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-03-31 | security/vboot: Decouple measured boot from verified boot | Bill XIE |
2020-03-18 | mainboard/[^a-p]*: Remove copyright notices | Patrick Georgi |
2020-01-10 | src: Remove blank acpi_tables source files | Karthikeyan Ramasubramanian |
2019-12-31 | mb/**/dsdt.asl: Remove outdated sleepstates.asl comment | Angel Pons |
2019-12-21 | mb/**/dsdt.asl: Remove "Some generic macros" comment | Angel Pons |
2019-12-20 | src/mainboard: Remove unused '#include <device/pci.h>' | Elyes HAOUAS |
2019-11-23 | Kconfig: comply to Linux 5.3's Kconfig language rules | Patrick Georgi |
2019-11-12 | src/mainboard/siemens: Use PTN3460 chip driver | Uwe Poeche |
2019-11-12 | mb/siemens/mc_apl6: Enable VT-d feature | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Add TPM to devicetree | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Enable SDHCI and disable eMMC controller | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Adjust clock lines used on PCIe-2-PCI bridge | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Enable VBOOT per default | Werner Zeh |
2019-11-11 | mb/siemens/mc_apl6: Add new mainboard based on mc_apl3 | Werner Zeh |
2019-11-01 | soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpi | Subrata Banik |
2019-10-24 | mb/siemens/{mc_apl1, mc_bdx1}: Remove offsets from flashmap files | Werner Zeh |
2019-10-18 | mb/siemens/mc_apl{3,5}: Remove __weak symbol from GPIO functions | Werner Zeh |
2019-09-25 | mb/siemens/mc_apl1: Sort the names of all variant mainboards | Werner Zeh |
2019-09-25 | mb/siemens/mc_apl{2,4,5}: Enable VBOOT | Werner Zeh |
2019-09-05 | mb/siemens/mc_apl5: Disable IGD if no EDID data available | Mario Scheithauer |
2019-07-18 | mb/siemens/{mc_apl1,...,mc_apl5}: Fix GPIO settings | Mario Scheithauer |
2019-07-18 | mb/siemens/mc_apl1: Disable all UHS-I SD-Card speed modes | Mario Scheithauer |
2019-07-12 | mb/siemens/mc_apl3: Enable LPSS UART 1 | Mario Scheithauer |
2019-07-11 | mb/siemens/{baseboard,mc_apl3,mc_apl4,mc_apl5}: Fix GPIO_168 | Mario Scheithauer |
2019-07-11 | mb/siemens/{mc_apl1,...,mc_apl5}: Reduce eMMC bus speed mode | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Change PTN interface settings | Mario Scheithauer |
2019-06-21 | siemens/mc_apl5: Enable TPM support | Mario Scheithauer |
2019-06-06 | siemens/mc_apl5: Add own GPIO table | Mario Scheithauer |