summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens/mc_apl1
AgeCommit message (Expand)Author
2018-10-01siemens/mc_apl1: Activate clock spreading for PTN3460Mario Scheithauer
2018-09-27siemens/mc_apl1: Add new mainboard variant mc_apl2Mario Scheithauer
2018-09-27siemens/mc_apl1: Make the DDR memory swizzle data configurableMario Scheithauer
2018-08-31siemens/mc_apl1: Correct the Tx signal from SATA interfaceMario Scheithauer
2018-08-28siemens/mc_apl1: Extend circuit life by clock gating and power gatingMario Scheithauer
2018-08-27siemens/mc_apl1: Disable PCI clock outputs on XIO bridgeMario Scheithauer
2018-08-24siemens/mc_apl1: Select DDR50 mode for eMMCMario Scheithauer
2018-08-23siemens/mc_apl1: Make adjustments for the 1st redesign of this mainboardMario Scheithauer
2018-08-23siemens/mc_apl1: Move board specific things to mc_apl1 variantMario Scheithauer
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
2018-05-08mb/siemens: Get rid of device_tElyes HAOUAS
2018-04-27siemens/mc_apl1: Move board specific things to mc_apl1 variantMario Scheithauer
2018-04-26siemens/mc_apl1: Provide baseboard and variant conceptsMario Scheithauer
2018-04-24compiler.h: add __weak macroAaron Durbin
2018-04-13siemens/mc_apl1: Fix accuracy issue with IDT PMICMario Scheithauer
2018-04-11siemens/mc_apl1: Make DRAM configuration more flexibleMario Scheithauer
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
2017-11-07siemens/mc_apl1: Select CONFIG_NC_FPGA_NOTIFY_CB_READYMario Scheithauer
2017-11-03siemens/mc_apl1: Enable I2C0 with 100kHzMario Scheithauer
2017-11-03siemens/mc_apl1: Set coreboot ready LEDMario Scheithauer
2017-11-03siemens/mc_apl1: Add legacy IRQ routing for PCI devicesMario Scheithauer
2017-09-26Use stopwatch_wait_until_expired where applicableJonathan Neuschäfer
2017-09-21siemens/mc_apl1: Move SCI to IRQ 10Mario Scheithauer
2017-09-14siemens/mc_apl1: Add delay to wait for legacy devicesWerner Zeh
2017-09-08siemens/mc_apl1: Disable internal UARTsMario Scheithauer
2017-09-08siemens/mc_apl1: Set bus master bit for on-board PCI deviceMario Scheithauer
2017-08-18include/device: Split i2c.h into threeNico Huber
2017-08-15soc/intel/common/block: Add LPC Common code and use it for APLRavi Sarawadi
2017-07-27siemens/mc_apl1: Select skip RAPL configurationMario Scheithauer
2017-07-20siemens/mc_apl1: Activate ECC for DRAMMario Scheithauer
2017-07-20siemens/mc_apl1: Include platform.aslMario Scheithauer
2017-07-18siemens/mc_apl1: Disable SDCARDMario Scheithauer
2017-07-13Rename __attribute__((packed)) --> __packedStefan Reinauer
2017-06-30mb/siemens/mc_apl1: Set up RTC backup mode to primary cellWerner Zeh
2017-06-23siemens/mc_apl1: Enable decoding for COM 3 on LPCMario Scheithauer
2017-06-23siemens/mc_apl1: Disable XDCIMario Scheithauer
2017-06-13siemens/mc_apl1: Enable decoding for COM 3 on LPCMario Scheithauer
2017-06-13siemens/mc_apl1: Use Siemens NC FPGA driverMario Scheithauer
2017-05-17siemens/mc_apl1: Program eMMC DLL settingsMario Scheithauer
2017-05-17siemens/mc_apl1: Select external 8250 UARTMario Scheithauer
2017-05-11siemens/mc_apl1: Add usage of external RTC RX6110 SAMario Scheithauer
2017-05-11siemens/mc_apl1: Correct GPIO settingsMario Scheithauer
2017-05-05mainboard/siemens/mc_apl1: remove unnecessary headerAaron Durbin
2017-04-04siemens/mc_apl1: Activate PTN3460 eDP to LVDS bridge ICMario Scheithauer
2017-03-29siemens/mc_apl1: Adjust gpio settingsMario Scheithauer
2017-03-15siemens/mc_apl1: Clean up the codeMario Scheithauer
2017-02-20siemens/mc_apl1: Set MAC address for all available i210 MACsMario Scheithauer
2017-02-15siemens/mc_apl1: Make basic settings for booting the mainboardMario Scheithauer
2017-02-02siemens/mc_apl1: Add new mainboardMario Scheithauer
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 05:38:49 +0000