summaryrefslogtreecommitdiff
path: root/src/mainboard/ocp/deltalake/devicetree.cb
AgeCommit message (Collapse)Author
2020-09-12mb/ocp/deltalake: Enable TPM2Christian Walter
Change-Id: I6eaaf80dd2bd69096574ab967ec0c6738b05903b Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-14mb/ocp/deltalake: enable VT-dJonathan Zhang
Update devicetree.cb to configure VT-d to be enabled. TESTED=booted on DeltaLake config A server, and verify DMAR table. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I7d76cd9d50d3e69a4919de281f11d30851bffa3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/44281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-08-14soc/intel/xeon_sp/cpx: remove unsupported configsJonathan Zhang
coherency_support and ats_support are not supported by CPX-SP FSP. Remove them from soc_intel_xeon_sp_cpx_config struct. Remove corresponding settings from DeltaLake devicetree.cb. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ibe1c4e88817fc4be7915e95fa829f0a4c0d947f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-31drivers/ipmi/ocp: Add function to support OCP specific ipmi commandTim Chu
Add driver for OCP specific ipmi commands. With this driver, OCP specific ipmi command can be used after implementing functions here. TEST=Build with CB:42242 on Delta Lake, select Kconfig option: IPMI_OCP and add device in devicetree to open this function. Use ipmi-util in OpenBMC to dump raw data and check if this function work. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I2efa85978ec4ad3d75f2bd93b4139ef8059127ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/43996 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16Revert "mb/ocp/deltalake: Select IPMI OCP to send POST start/end command"Philipp Deppenwiese
This reverts commit a5ca4a0c75237093f1a4d90f30c0c932e5fcd05d. Reason for revert: Breaks coreboot tree because of non existent kconfig symbol Change-Id: Ib8f55dc2f6444690945bc2dc64baad5d0c39cdf4 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-16mb/ocp/deltalake: Select IPMI OCP to send POST start/end commandTimChu
Implement sending POST start/end command to BMC. TEST=Read POST command log in OpenBMC, if command received successfully, message may show as below, root@bmc-oob:~# cat /var/log/messages |grep -i "POST" 2020 May 28 13:21:22 bmc-oob. user.info fby3-v2020.20.2: ipmid: POST Start Event for Payload#1 2020 May 28 13:21:25 bmc-oob. user.info fby3-v2020.20.2: ipmid: POST End Event for Payload#1 root@bmc-oob:~# Signed-off-by: TimChu <Tim.Chu@quantatw.com> Change-Id: I38b512ee97c0eda6ba54482a448ef9ffc27b4ddb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41993 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-16mb/ocp/deltalake: Config PCH PCIe ports in devicetreeMorgan Jang
Tested on OCP Delta Lake with lspci checking if PCIe speed is changed are expected. Change-Id: I189027c403814d68db2b7c5f41fc254a293fe3a1 Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-07-08mb/ocp/deltalake: Enable LPC IO 0x600 decode for BICBryant Ou
BIC uses LPCflash utility to flash FW, it uses LPC to send the bridge IC image from host to bridge IC, 0x600 ~ 0x6FF is used to send BIC image for in-band update support. TEST=Use LPCflash utility to flash BIC FW on YV3 successfully. [root@localhost lpcflash_101_bin]# ./lpc_update.sh Y3BRDL_D06.bin Update Bridge IC Firmware from LPC Deltalake linux utility ver:1.01 build time: Feb 11 2020 14:30:55 Processing image file: Y3BRDL_D06.bin .. of size 206968 (0x00032878) bytes .. file will be padded to a 64-byte size .. with DEBUG Enabled Generating CRC-32 for file. Done (0x4e3905a3). iBytesRead (0x00007c00). Discovering LPC boot loader. Discovered @ 0x3f8. Configuring LPC boot loader. Configured @ 0x00000600. Sending header block. Sent. Loading firmware into target. Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 31744 bytes ............................... Sending 16512 bytes ................. Load complete. Update done! Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Change-Id: Ia1ea9b35b154225fdfd8955830e6c42b453a81ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/42856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-06-25mb/ocp/deltalake: Enable IPMI KCSMorgan Jang
Config the IO port for IPMI KCS and set bmc_boot_timeout for checking BMC self test result. TEST=Check if the BMC IPMI reponse data is correct or not. Change-Id: I675060299b486986ebc39d8f714615b3e13de89a Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41023 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22mb/ocp/deltalake: Add OCP Delta Lake mainboardJonathan Zhang
OCP Delta Lake server is a one socket server platform powered by Intel Cooper Lake Scalable Processor. The Delta Lake server is a blade of OCP Yosemite V3 multi-host sled. TESTED=Successfully booted on both YV3 config A Delta Lake server and config C Delta Lake server. The coreboot payload is Linux kernel plus u-root as initramfs. Below are the logs of ssh'ing into a config C deltalake server: jonzhang@devvm2573:~$ ssh yv3-cth root@ip's password: Last login: Mon Apr 20 21:56:51 2020 from [root@dhcp-100-96-192-156 ~]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 52 On-line CPU(s) list: 0-51 ... [root@dhcp-100-96-192-156 ~]# cbmem 34 entries total: 0:1st timestamp 28,621,996 40:device configuration 178,835,602 (150,213,605) ... Total Time: 135,276,123,874,479,544 [root@dhcp-100-96-192-156 ~]# cat /proc/cmdline root=UUID=f0fc52f2-e8b8-40f8-ac42-84c9f838394c ro crashkernel=auto selinux=0 console=ttyS1,57600n1 LANG=en_US.UTF-8 earlyprintk=serial,ttyS0,57600 earlyprintk=uart8250,io,0x2f8,57600n1 console=ttyS0,57600n1 loglevel=7 systemd.log_level=debug Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: I0a5234d483e4ddea1cd37643b41f6aba65729c8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>