summaryrefslogtreecommitdiff
path: root/src/mainboard/lippert
AgeCommit message (Collapse)Author
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c file already placed under southbridge/. All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally identical reset.c file under mainboard/. Move those files under respective southbridge/. Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3486 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-04AMD Northbridge LX: get rid of #include "northbridge/amd/lx/raminit.c"Christian Gmeiner
Change-Id: I249c63646267ebe8dd8e06980aa6367a16fe7297 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3370 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: convert spd_read_byte() to non-static versionChristian Gmeiner
Change-Id: Ie329606852dfd7109acb694e9a9ff851b023cc63 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3369 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04AMD Northbridge LX: move #include "northbridge/amd/lx/raminit.h"Christian Gmeiner
Move the include before static inline int spd_read_byte(). Change-Id: I4cac4b1f55368041b067422d95c09208e15d0f2d Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3368 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-30AMD Llano, Brazos boards: Use `sizeof(var)` to get its sizePaul Menzel
Change `sizeof(type) * n`, where n is the number of array elements, to `sizeof(variable)` to directly get the size of the variable (struct, array). Determining the size by counting array elements is error prone and unnecessary. Rudolf Marek’s patch »ASUS F2A85-M: Correct and clean up PCIe config« [1] contains the same change and is ported over. In the commit message Rudolf makes the following comment. »Not sure why the copy is needed instead of direct reference. Maybe it has something to do with CAR?« Testing on the ASRock E350M1, no regressions were noticed. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I123031b3819a10c9c85577fdca96c70d9c992e87 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3248 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-14AMD Brazos/Trinity boards: PlatformGnbPcie.c: Reserve correct amount of memoryPaul Menzel
In `PlatformGnbPcie.c` AGESA functions are used to reserve memory space to save the PCIe configuration to. This is the With the following definitions in `AGESA.h` $ more src/vendorcode/amd/agesa/f14/AGESA.h […] /// PCIe port descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info } PCIe_PORT_DESCRIPTOR; /// DDI descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in complex */ IN PCIe_ENGINE_DATA EngineData; ///< Engine data IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info } PCIe_DDI_DESCRIPTOR; /// PCIe Complex descriptor typedef struct { IN UINT32 Flags; /**< Descriptor flags * @li @b Bit31 - last descriptor in topology */ IN UINT32 SocketId; ///< Socket Id IN PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). IN VOID *Reserved; ///< Reserved for future use } PCIe_COMPLEX_DESCRIPTOR; […] memory has to be reserved for the `PCIe_COMPLEX_DESCRIPTOR` and, as two struct members are pointers to arrays with elements of type `PCIe_PORT_DESCRIPTOR` and `PCIe_DDI_DESCRIPTOR`, space for these times the number of array elements have to be reserved: a + b * 5 + c * 2. sizeof(PCIe_COMPLEX_DESCRIPTOR) + sizeof(PCIe_PORT_DESCRIPTOR) * 5 + sizeof(PCIe_DDI_DESCRIPTOR) * 2; But for whatever reason parentheses were put in there making this calculation incorrect and reserving too much memory. (a + b * 5 + c) * 2 So, remove the parentheses to reserve the exact amount of memory needed. The ASRock E350M1 still boots with these changes. No changes were observed as expected. Rudolf Marek made this change as part of his patch »ASUS F2A85-M: Correct and clean up PCIe config« [1]. Factor this hunk out as it affects all AMD Brazos and Trinity based boards. [1] http://review.coreboot.org/#/c/3194/ Change-Id: I32e8c8a3dfc5e87eb119eb17719d612e57e0817a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3239 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-05-09AMD: Reduce stack size from 64 KB to the default of 4 KBPaul Menzel
Apply the following commit to all AMD boards. commit 935850e08293cec1cb27d12358b27285e780566a Author: Stefan Reinauer <reinauer@chromium.org> Date: Mon May 6 16:16:03 2013 -0700 asrock/e350m1: reduce default stack size The stack used on the ASRock E350M1 is significantly less than what we currently set (64k per core). In fact, we use about half of the default stack size (4k) on core 0 and even less on non BSP cores [1]: $ grep stack coreboot_without_patch_but_monotonic_timer.log CPU1: stack_base 002a0000, stack_end 002afff8 CPU1: stack: 002a0000 - 002b0000, lowest used address 002afda8, stack used: 600 bytes CPU0: stack: 002b0000 - 002c0000, lowest used address 002bf75c, stack used: 2212 bytes […] Reviewed-on: http://review.coreboot.org/3209 Please note that AGESA seems to define bigger stack sizes. But these seem to be too much too. $ git grep STACK_SIZE src/vendorcode/amd […] src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define BSP_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE0_STACK_SIZE 16384 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c:#define CORE1_STACK_SIZE 4096 src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: BSP_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE0_STACK_SIZE, src/vendorcode/amd/agesa/f14/Proc/CPU/Family/0x14/cpuF14CacheDefaults.c: CORE1_STACK_SIZE, […] The following command was used to create the patch. $ git grep -l STACK_SIZE src/mainboard/ | xargs sed -i '/STACK_SIZE/,+3d' Change-Id: I36b95b7a6f190b64d0639fc036ce2fb0253f3fa1 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3217 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-05-08copy_and_run: drop boot_complete parameterStefan Reinauer
Since this parameter is not used anymore, drop it from all calls to copy_and_run() Change-Id: Ifba25aff4b448c1511e26313fe35007335aa7f7a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3213 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-20AMD SB800 based boards: Use `#include <sb_cimx.h>` instead of `"sb_cimx.h"`Paul Menzel
Due to $ more src/southbridge/amd/cimx/sb800/Makefile.inc […] romstage-y += cfg.c romstage-y += early.c romstage-y += smbus.c ramstage-y += cfg.c ramstage-y += late.c […] `src/southbridge/amd/cimx/sb800/` is passed with the switch `-I` to the compiler, where it is also going to find the header file `sb_cimx.h`. Therefore use `#include <sb_cimx>` everywhere, which is what some AMD SB800 based boards already do. The only effect is, that the compiler will not needlessly look into directories which do not contain the header file [1]. The following command was used for the replacement. $ git grep -l sb_cimx.h src/mainboard/ | xargs sed -i 's/#include "sb_cimx.h"/#include <sb_cimx.h>/' [1] http://gcc.gnu.org/onlinedocs/cpp/Search-Path.html Change-Id: I96ab34bac1524e6c38c85dfe9d99cb6ef55e6d7c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3118 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-09FrontRunner/Toucan-AF: boards will be renamed to fit ADLINK schemeJens Rottmann
Originally developed by LiPPERT and after the acquisition marketed as 'LiPPERT by ADLINK', the plan is now to streamline both boards into the ADLINK naming scheme. But AFAIK a few have already been sold and as of this writing the website still advertises the old names. And in any case the veteran LX products will continue to be sold by ADLINK under their original names. So create CONFIG_VENDOR_ADLINK, currently only telling users to look under LiPPERT (however any future boards will be added here). Further add an explanation to CONFIG_VENDOR_LIPPERT, and in the Mainboard model selection show both names. Change-Id: Iaafa88533ef4cce33243293c3d55754e7e93d003 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/3046 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-22FrontRunner/Toucan-AF: Use SPD read code from F14 wrapperJens Rottmann
Changes: - Get rid of the LiPPERT FrontRunner-AF and Toucan-AF mainboard specific code and use the platform generic function wrapper that was added in change http://review.coreboot.org/#/c/2497/ AMD f14: Add SPD read functions to wrapper code - Move DIMM addresses into devicetree.cb - Add the ASF init that used to be in the SPD read code into mainboard_enable() Notes: - The DIMM reads only happen in romstage, so the function is not available in ramstage. Point the read-SPD callback to a generic function in ramstage. Change-Id: I4ee5e1bc34f4caee20615c48248d4f7605c09377 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2874 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-17Lippert Fam14 DSDT: Remove INI method from AZHD deviceMike Loptien
I am removing the _INI method from the AZHD device because it does not seem to do anything and causes errors in the FWTS[1] (Firmware Test Suite) test 'method'. The INI method performs device specific initialization and is run when OSPM loads a description table. It must only access OperationRegions that have been indicated as available by the _REG (Region) method. We do not have a _REG method and during my testing, I added a REG method but it did not seem to make a difference in the PCI register space. The bit fields defined as NSDI (Disable No Snoop), NSDO (Disable No Snoop Override), and NSEN (Enable No Snoop Request) do not ever get written from their default values. And writing to these bit fields does not seem to be necessary because I did not notice any change in audio functionality. In an effort to clean up as many FWTS errors as possible, I propose removing this method altogether. I have seen no change in operation (audio works with and without this method) and there does not seem to be any change in lspci or dmesg. FWTS information can be found here: [1]: https://wiki.ubuntu.com/Kernel/Reference/fwts This is the same change as made to Persimmon in Change-ID If8d86f: http://review.coreboot.org/#/c/2726/ Change-Id: Iff594d4a3493531561eb25d1cceeb97bcefde424 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17Lippert Fam14 DSDT: Add secondary bus range to PCI0Mike Loptien
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number in the CRS method. This change came in response to a 'dmesg' error which states: '[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS' By adding the 'WordBusNumber' macro, ACPI can set up a valid range for the PCIe downstream busses, thereby relieving the Linux kernel from "guessing" the valid range based off _BBN or assuming [0-0xFF]. The Linux kernel code that checks this bus range is in `drivers/acpi/pci_root.c`. PCI busses can have up to 256 secondary busses connected to them via a PCI-PCI bridge. However, these busses do not have to be sequentially numbered, so leaving out a section of the range (eg. allowing [0-0x7F]) will unnecessarily restrict the downstream busses. This is the same change as made to Persimmon with change-id I44f22: http://review.coreboot.org/#/c/2592/ Change-Id: Ie36b60973c6a5f9076bb55c8f451532711a2f8a8 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2737 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-17Lippert Fam14 DSDT: Add OSC methodMike Loptien
The _OSC method is used to tell the OS what capabilities it can take control over from the firmware. This method is described in chapter 6.2.9 of the ACPI spec v3.0. The method takes 4 inputs (UUID, Rev ID, Input Count, and Capabilities Buffer) and returns a Capabilites Buffer the same size as the input Buffer. This Buffer is generally 3 Dwords long consisting of an Errors Dword, a Supported Capabilities Dword, and a Control Dword. The OS will request control of certain capabilities and the firmware must grant or deny control of those features. We do not want to have control over anything so let the OS control as much as it can. The _OSC method is required for PCIe devices and dmesg checks for its existence and issues an error if it is not found. This is the same change made to Persimmon with Change-ID I149428: http://review.coreboot.org/#/c/2684/ Change-Id: Iaf7b8153cec4d730efbceae3e6957d2904b8fae4 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/2740 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-08FrontRunner/Toucan-AF: lower SPI speed to 22 MHzJens Rottmann
The Hudson-E1's default SPI speed for normal i.e. non-fast reads is 66 MHz, but the SST 25VF032B datasheet allows max. 25. Lower the speed to 22 MHz, otherwise BIOS flashing fails. Change-Id: I22e87d833a3ebd316b6e873595a2480831533ab1 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2605 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-03-04FrontRunner/Toucan-AF: drop unnecessary compile time CPU model selectionJens Rottmann
The first reason for selecting the CPU model at compile time was a multi-second pause if booting a single core Fusion T40R with MAX_CPUS=2. Recent tests show the pause has disappeared, someone must have fixed it. The second reason was me not knowing how to make a single vgabios image work with two different PCI IDs. Many thanks to Martin Roth for educating me! Quote: "The way to make coreboot use the same vbios for different video device IDs is through the map_oprom_vendev function. In family 14 it's in northbridge/amd/agesa/family14/amdfam14_conf.c You would name your video bios 1002,9802 in the config and all the other device/vendor IDs for the family 14h processors will fall through the initial check for the video bios and will get remapped to use that vbios. This only works if you're initializing the vbios inside coreboot. I don't know if you're using SeaBios as a payload, but if you are you can add the vbios to cbfs as vgaroms/vbios.rom and the rom will always be initialized." I'd like to add the vgabios is added as type 'optionrom' when Coreboot make adds it, however to work with SeaBios it has to be added manually with cbfstool and with type 'raw', or it will hang. Change-Id: I8190d0c3202a60dfccb77dde232f9ba7ce5ce318 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-03AMD Persimmon, LiPPERT Fam14: Fix typo code*c* in commentPaul Menzel
Commit f154c018 Author: Marc Jones <marcj303@gmail.com> Date: Wed Dec 14 11:24:00 2011 -0700 Persimmon audio codec verb patch. Reviewed-on: http://review.coreboot.org/490 has a typo code*c* in the comments for `AZALIA_OEM_VERB_TABLE`. As this was copied over to the LiPPERT Fam14 boards, use the following command to fix the typo. $ git grep -l cocec | xargs sed -i s,cocec,codec, Change-Id: I1525b0445edab81ab136b3adece52b78ba7abc71 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2576 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-02FrontRunner/Toucan-AF: work around AGESA RAM init crashing on rebootJens Rottmann
If you try to reset the system with outb(3,0x92), outb(4,0xcf9) or a triple-fault it will instead crash with a messy screen. As the more common outb(0xFE, 0x64) doesn't work with our setup, Linux will crash whenever you ask it to reboot. Closer inspection shows that on a warm boot of Coreboot agesawrapper_amdinitpost() always fails with error code 7. Looks like DDR3 re-init goes wrong somehow. I tried find the reason for this but was unable to. I am convinced this is not board specific but a bug in AGESA. In the end I had to settle for a workaround: if amdinitpost returns 7 this patch resets the system harder with outb(0x06, 0x0cf9), after that RAM init will succeed. As amdinitpost is early in POST this automatic reset is quick enough not to be noticable. I'd perfer a real fix, but that's all I have. Change-Id: I4763254b489f42a135232e45328ecf0d5c4d961a Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT Toucan-AF [2/2]: actually implement mainboard supportJens Rottmann
Step 2: change the Persimmon code to adapt it to the new board's hardware. The Toucan-AF is a COM Express Compact Type 6 form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - 1-4 GB DDR3 memory down - 1x VGA, 2x DisplayPort (1 switchable to LVDS) - AMD A55E (Hudson-E1) southbridge - 8x USB 2.0 - 4x SATA - HD Audio (with codec on baseboard) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - 7x PCIe2.0 x1 (1 on PEG) - Intel I210 GbE (on APU PCIe x1, can be disabled for additional PCIe) - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS) The Toucan-AF has no SIO on board. This patch includes basic support for a Winbond W83627DHG (PS/2, 2x RS232), because the ADLINK ExpressBase-6 used for evaluation happens to have one. The code may have to be adapted to the actual baseboard of the application. http://www.adlinktech.com/PD/web/PD_detail.php?pid=1132 Change-Id: I9041b905bad45852ac9b402fcbd5decbc98b377b Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT Toucan-AF [1/2]: create board by forking AMD PersimmonJens Rottmann
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Git's copy detection is imperfect (and slow). Change-Id: I1ff02913479c07679f8c3ae5e6dd7876e6000b55 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT FrontRunner-AF [2/2]: actually implement mainboard supportJens Rottmann
Step 2: change the Persimmon code to adapt it to the new board's hardware. The FrontRunner-AF is a PC/104+ form factor embedded board: - AMD Fusion G-T56N (1.65 GHz dual core) or T40R (1 GHz single core) APU - DDR3 SO-DIMM socket (1.5 or 1.35V) - VGA and LVDS (via Analogix ANX3110) - AMD A55E (Hudson-E1) southbridge - 6x USB 2.0 - 1x SATA, 1x CFast socket - HD Audio (via Realtek ALC886) - PCI and ISA (via ITE IT8888) - NEC uPD78F0532 microcontroller on I2C ("SEMA") - Intel I210 GbE (on APU PCIe x1) - SMSC SCH3112 SIO - PS/2 - 2x RS232/485 - 2x SST 25VF032B (SO8, soldered) 4 MB SPI flash (BIOS and failsafe BIOS) http://www.adlinktech.com/PD/web/PD_detail.php?pid=1131 Change-Id: Id55f89d224ad669b351c36128b12299802b721ba Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2553 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-02LiPPERT FrontRunner-AF [1/2]: create board by forking AMD PersimmonJens Rottmann
Step 1: copy all files unmodified from Persimmon. This makes it much easier later to see how the two boards actually and deliberately differ when porting bugfixes from one to the other. Git's copy detection is imperfect (and slow). Change-Id: I2fd1bf8428fc8a1e7becee888b6182b9bd8166a0 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/2552 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-09romcc: Use default romcc flags for most boardsPatrick Georgi
Except for one board, the flags can be derived from CONFIG_MMX and CONFIG_SSE. Change-Id: I64a11135ee7ce8676f3422b2377069a3fa78e24d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/2336 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-29Drop empty mainboard.cKyösti Mälkki
Change-Id: Idcf9349d96297b8cb0ea1e68769e02659ac16ab8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1933 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-29Drop empty mainboard_opsKyösti Mälkki
Change-Id: I24866142eebcb8fdbc7e21f5b2f364a8d1b264b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1932 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
intel_irq_routing_table is a local structure that should not be used globally, because it might not be there on all mainboards. Instead, the API has to be corrected to allow passing a PIRQ table in where needed. Change-Id: Icf08928b67727a366639b648bf6aac8e1a87e765 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26amd/lx: Move configuration from source to KconfigPatrick Georgi
LX has two values that are usually automatically derived but can be overridden, that were so far defined in each board's romstage. These values, along with the toggle to enable override are now part of LX's Kconfig. For boards that gave values but requested autogeneration, the values are removed. Further improvements: Figure out the various fields in PLLMSRlo and make them sensible Kconfig options (instead of the hex value it is now) Change-Id: I8a17c89e4a3cb1b52aaceef645955ab7817b482d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1227 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-07Update geode GX2 tree to match LX.Nils Jacobs
Change-Id: I5b99c531e44ea09990b9da0b97213fb7945f34ee Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
to FG (FooGlue). As the GX2 has no VIP port. -Change the Memmory setup MSR register names so they correspond better to the databook. (Part1) This is less confusing for beginners. -Add a MSR printing function to northbridge.c like in the Geode LX code. -Remove the AES register names.(GX2 has no AES registers) -Delete some unused code. -Clean up GX2 northbridge code to match Geode LX code. -Add missing copyright header to northbridge.c. -Move hardcoded IRQ defining from northbridge.c to irq_tables.c . Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08first round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22Drop per-board ram_check() calls for now.Uwe Hermann
Every board had a slightly different invokation, very often commented out anyway. We could either decide that this is only to be used by developers during bringup (and thus added manually to romstage.c and removed before the board gets committed). This method seems to be preferred from what I have heard on IRC / mailing list in the past. Or, we add the ram_check() somewhere globally and allow the user to enable it via menuconfig (possibly only if EXPERT is selected). Either way, the current method of spreading the calls all over the place is not really the way to go. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Simplify a few code chunks, fix whitespace and indentation.Uwe Hermann
Also, remove some less useful comments, some dead code / unused functions. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6108 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Drop excessive whitespace randomly sprinkled in romstage.c files.Uwe Hermann
Also drop some dead or useless code snippets. Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6107 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-21Use DIMM0 et al in lots more places instead of hardocding values.Uwe Hermann
The (0xa << 3) expression equals 0x50, i.e. DIMM0. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6103 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-20Unify DIMM SPD addressing. For Geode, change thePatrick Georgi
addressing scheme to match the rest of the tree (0x50 instead of 0xa0). abuild tested. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05Add Kconfig CPU speed selection to Geode GX2 boards.Nils Jacobs
This is Abuild and boot tested. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6023 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-05GX2: Define the unused DIMM1 to 0xFF to make it obvious it is a bogus value.Nils Jacobs
This is Abuild and boot tested. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-01Change Geode GX2 to use the auto DRAM detect code from Geode LX.Nils Jacobs
Also, change the GX2 boards to use it. Add a processor speed setting function in human readable MHz and remove the useless and broken PLLMSR settings (the processor speed was hardcoded to 366MHz in pll_reset.c). Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6011 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-13Enable or disable the power button in KconfigPeter Stuge
Some mainboards need to disable the power button to avoid turning off right after being turned on, while other boards ship with a jumper over the power button and should allow the user to configure the behavior. This adds infrastructure in the form of four mutually exclusive options which can be selected in a mainboard Kconfig (power button forced on/off, and user-controllable with default on/off) and one result bool which source code can test. (Enable the button or not.) The options have been implemented in CS5536 code and for all mainboards which select SOUTHBRIDGE_AMD_CS5536, but should be used also by other chipsets where applicable. Note that if chipset code uses the result bool ENABLE_POWER_BUTTON, then every board using that chipset must select one out of the four control options in order to build. All touched boards should have unchanged behavior, except pcengines/alix1c, traverse/geos and lippert/hurricane-lx where the power button can now be configured by the user. Build tested for alix1c, alix2d, hurricane-lx and wyse-s50. Confirmed to work as advertised on alix1c both with button enabled and disabled. Includes additional traverse/geos changes from Nathan and lippert/hurricane-lx changes from Jens to correctly use the new feature on those boards. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5948 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-10-05Remove lib/ramtest.c-include from all CAR boards.Patrick Georgi
Remove many more .c-includes from i945 based boards. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5910 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27I missed these boards in a previous commit.Warren Turkal
Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5873 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-27All these boards already had the CACHE_AS_RAM option in their individualWarren Turkal
configs. I just moved it the the CPU that they all use. Signed-off-by: Warren Turkal <wt@penguintechs.org> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5871 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-25Drop some useless "../../../" in #includes (trivial).Uwe Hermann
Build-tested using abuild. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5844 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-21Cut the crap.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5823 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-10Add support for LiPPERT Hurricane-LX (EPIC board with AMD Geode-LX,Jens Rottmann
CS5536, ITE IT8712F). Board support is based on the SpaceRunner-LX (with tiny bits from the RoadRunner-LX) even though the hardware really was the ancestor of our three other -LX boards and in fact among the earliest Geode-LX boards on the market. (Might even have been the first Geode-LX EPIC?) Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5801 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Add support for LiPPERT Cool LiteRunner-LX (PC/104 board with AMDJens Rottmann
Geode-LX, CS5536, ITE IT8712F), based on very similar SpaceRunner-LX. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5782 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-07Set up an arbitrary amount of system memory on Geode LX, soAurelien Guillaume
coreboot_ram can be unpacked to 1MB. The value is quickly replaced with the real value later, thus causing no harm. Move RAMBASE to the default of 1MB for the affected boards Signed-off-by: Aurelien Guillaume <aurelien@iwi.me> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5779 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-03Update RoadRunner and SpaceRunner config to get in sync with currentJens Rottmann
standard BIOSes RRLX0013 and SRLX0013. Specifically move SPI and PME I/Os to 0x1228 and 0x298 and switch SIO watchdog to ext. 48 MHz CLKIN. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5775 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-31SMC_CONFIG is needed before the device tree is ready and some peopleJens Rottmann
would rather not have mainboard settings like sio_gp1x_config in the device tree anyway. So found a nice united home for both in Kconfig, where users can change them without having to mess around in the C code. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5760 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30We call this cache as ram everywhere, so let's call it the same in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5756 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-30Restructured all vendors' Kconfig files to no longer source the boards'Jens Rottmann
Kconfigs from within the choice/endchoice block. This makes it possible to define user visible board specific options. Moved all vendor names and PCI ids to the vendors' Kconfigs. Now all options in each file depend on the same symbol, so replaced all "depends on"s with a single "if". Sorted boards (sort -d), cleaned whitespace. This patch also introduces a dummy option BOARD_SPECIFIC_OPTIONS, which is always "y" and never used. It it simply needed to have something to attach the boards' "select" statements to. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5754 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26Remove unused mainboard_config definitions. Trivial.Myles Watson
Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5744 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-26CONFIG_DEBUG_RAM_SETUP and CONFIG_DEBUG_SMBUS are only available if the board /Jens Rottmann
chipset support it. But this involves a long list of 'depends', which you have to remember updating manually. Converted this into HAVE_... properties, which will be inherited automatically if someone copies a chipset to create a new one. Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5743 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-08-03Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user /Stefan Reinauer
board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-28Let Geode GX2 use geode_post_code.h just like Geode LXNils Jacobs
Also clean up gx2def.h and geode_post_code.h a little. abuild tested and boot tested on a Wyse S50. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5671 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-26This patch converts the Geode GX2 boards to CAR.Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5669 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-06Re-integrate "USE_OPTION_TABLE" code.Edwin Beasant
Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5653 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-10This commit updates the Geode LX GLCP delay control setup from the v2 way to ↵Edwin Beasant
the v3 way. This resolves problems with terminated DRAM modules. Signed-off-by: Edwin Beasant <edwin_beasant@virtensys.com> Acked-by: Roland G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5629 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-06-01CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUSMyles Watson
and CONFIG_DEBUG_PIRQ. Fix a couple of typos. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5603 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-25Move CS5535 specific setup from GX2 driver to CS5535. Stefan Reinauer
To apply this patch you need to cp src/northbridge/amd/gx2/chipsetinit.c src/southbridge/amd/cs5535/ Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Nils Jacobs <njacobs8@hetnet.nl> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5589 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-09Remove pc80/serial.c includes in ROMCC boards and includePatrick Georgi
it centrally in console/console.h instead. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5538 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-08Drop console/console.c and pc80/serial.c from mainboards'Patrick Georgi
romstage.c. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5528 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-05-05Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster"Patrick Georgi
in device trees. Adapt sconfig as necessary. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5525 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-27Since some people disapprove of white space cleanups mixed in regular commitsStefan Reinauer
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-22fix compilation remaining geode boardsStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5475 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-21* clean up all but two warnings on artecgroup dbe61Stefan Reinauer
* integrate vsm init into normal x86.c code (so it can run above 1M) * call void main(unsigned long bist) except void cache_as_ram_main(void) on Geode LX (as we do on almost all other platforms now) * Unify Geode LX MSR setup (will bring most non-working LX targets back to life) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-08Replace dual_core and quad_core CMOS (nvram) options with multi_core. Fix ↵Myles Watson
some white space. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-04-01- get rid of ASM_CONSOLE_LOGLEVEL except in two assembler files.Stefan Reinauer
- start naming all versions of post code output "post_code()" Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31Drop \r\n and \n\r as both print_XXX and printk now do this internally.Stefan Reinauer
Only some assembler files still have \r\n ... Can we move that part to C completely? Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-31This patch drops arch/i386/lib/console.c and arch/i386/lib/console_print.c andStefan Reinauer
makes include/console/console.h and console/console.c usable both in __PRE_RAM__ and coreboot_ram stages. While debugging this, I removed an indirection from the e7520 ram init code (same as we did on a couple of other chipsets, removes some register pressure from romcc) Also, drop remainders of CONFIG_USE_INIT (except the one odd piece of dead code in cache_as_ram.inc) Then some ap_romstage.c fixes, at least the nvidia/l1_2pvv compiled for me with CONFIG_AP_CODE_IN_CAR set in Kconfig which it did not before. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-30drop USE_INIT from mainboard Kconfig files, it's already set in src/KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5331 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29This drops the ASSEMBLY define from romstage.c, tooStefan Reinauer
(since it's not assembly code, this was a dirty hack anyways) Also run awk 1 RS= ORS="\n\n" < $FILE > $FILE.nonewlines mv $FILE.nonewlines $FILE on romstage.c because my perl -pi -e 's,#define ASSEMBLY 1,,g' */*/romstage.c cut some holes into the source. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5320 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-29__PRE_RAM__ is now correctly specified in the Makefile. No need to hack it intoStefan Reinauer
romstage.c anymore Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5315 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-22printk_foo -> printk(BIOS_FOO, ...)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5266 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-27- make HAVE_HARD_RESET match what newconfig didPatrick Georgi
- introduce BOARD_HAS_HARD_RESET and use it if a board provides hard_reset in $(MAINBOARDDIR)/reset.c, instead of some chipset component - move a couple of rules out of the mainboards' Makefiles into src/arch/i386/Makefile.inc: initobj-y += crt0.o obj-y += mainboard.o obj-$(CONFIG_GENERATE_MP_TABLE) += mptable.o obj-$(CONFIG_GENERATE_PIRQ_TABLE) += irq_tables.o obj-$(CONFIG_BOARD_HAS_HARD_RESET) += reset.o - remove Makefile.incs that are empty (or comment-only) after these changes, incl. Makefile.romccboard.inc (and references to it) - Make include not fail if Makefile.inc doesn't exist. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5168 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25Move the ldscripts logic to src/arch/i386/Makefile.incPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Joseph Smith <joe@settoplinux.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5164 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-25Unify crt0s setup to src/arch/i386/Makefile.inc. This variablePatrick Georgi
is not something users have to concern themselves with anymore. Also fixes some wrong romstrap configs for boards, fixing a couple of them. Also add "make printcrt0s" target for debugging crt0s when updating modified checkouts. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5162 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-23Only handle code as "driver" that actually uses our driverPatrick Georgi
infrastructure (special linking, data structures, etc) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-09Move all the copies of the romstage.inc rule toPatrick Georgi
src/arch/i386/Makefile.inc For that to work, I had to: - Add a CONFIG_ROMCC variable - Set that variable on all ROMCC boards - conditionally choose romcc or gcc rule based on that variable - remove those two rules from all the boards' Makefiles - switch a couple of boards to HAVE_OPTION_TABLE, as they actually have. Also remove the duplication of rules with the sole difference of if they depend on option_table.h or not. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-08janitor task: unify and cleanup naming.Stefan Reinauer
cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07fix further build.h dependencies that were undetected before we enabled it on Stefan Reinauer
our parallel build server ;-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5091 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-07newconfig is no more.Patrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-02-04Move CAR settings for all GX1, GX2, LX and Intel Slot2 boards to the CPU.Stefan Reinauer
This automatically adds the settings for those boards that didn't have settings at all yet. Also, small fixup to compareboard. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> --> Please help porting all boards from newconfig to Kconfig <-- This is a lot of janitor work and we can use your helping hands. The sooner we can get rid of Kbuild, the better. The KBuild report on the mailing list shows the config differences between newconfig and Kconfig. In theory, all Kconfig configs should be equal to their newconfig pendant. In practice it's better to come close but stay clean. --> Please help porting all boards from newconfig to Kconfig <-- git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-30* fix crt0s/ldscripts paths to fix out of tree build.Stefan Reinauer
* fix iasl output directory for i945 boards (patch for moving it to the mainboard directory will follow) * coreboot_table.c: lb_mainboard can be static * coreboot_table.c: dump memory table in debug and spew mode * fix a warning in bootblock.c * don't include arch/i386/init in arch/i386/Makefile.inc * announce generation of crt0_includes.h * allow overriding $(obj) * drop unused src_types from Makefile * correctly use hostname -s instead of hostname for COMPILE_HOST Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5065 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
HT_CHAIN_UNITID_BASE HT_CHAIN_END_UNITID_BASE SB_HT_CHAIN_ON_BUS0 SB_HT_CHAIN_UNITID_OFFSET_ONLY MAX_CPUS MAX_PHYSICAL_CPUS ROM_SIZE TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 Also hook up asus/p2b-ds Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5051 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 22:02:39 +0000