aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo/x60/romstage.c
AgeCommit message (Collapse)Author
2017-05-25mb/lenovo/*60: Remove not existing DIMMs from SPD mapArthur Heymans
Should result in a tiny speed bump in raminit since those addresses are not checked for present DIMMs. Checked in schematics of both Thinkpad X60 and T60 and tested to configure raminit correctly for all DIMMs populated on X60. Change-Id: I56c4f3176541bc75a8de3aac9f87526a77fc819b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-20mb/lenovo/x60: Remove PCI reset code from romstagePaul Menzel
Commit bf264e94 (i945:) adds a PCI reset to the romstage, and commit bc8613ec (Fix i945 based boards) fixes that to use the correct delay of 200 ms. This code was then copied over, when adding support for the Lenovo X60. The reset was related to the shipped crypto card on the Roda RK886EX and Kontron 986LCD-M, so is not needed on the Lenovo X60. So remove it. TEST=Build and boot on Lenovo X60t. Change-Id: Ia37d9f0ecf5655531616edb20b53757d5d47b42f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17703 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-02lenovo/x60: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/lenovo/x60. The patch has been tested both with the arch/io.h definition of device_t enabled and disabled in order to ensure compatibility while the transaction takes place. Change-Id: Icaceeae2fc7276efa82d37582ecac93aaf37c41c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16372 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-11lenovo/x60: add info message if dock is presentAlexander Couzens
Change-Id: I5a6d41f815f65719780499fa18c131311a9dc8f7 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/16136 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-11lenovo/x60: add GPIOs initialisation before dock checkAntonello Dettori
Add GPIOs initialisation before dock check. Needed in order to properly detect the presence or absence of the lenovo dock. Previously the check always reported the dock as connected and currently it always reports it as disconnected since the GPIOs are not properly initialised during the check. Tested and confirmed working. Change-Id: I7fbf8c2262a1eb5dee9cbe5e23bf44f7f8181009 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16139 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-06-21intel/model_6ex: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I9bfaa53f8d09962d36df1e86a0edcf100bb08403 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15229 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-01-06mainboard/*/romstage.c: Sanitize system header inclusionsEdward O'Callaghan
Fix system include paths to be consistent. Chipset support is part of the Coreboot 'system' and hence 'non-local' (i.e., in the same directory or context). One possible product of this, is to perhaps allow future work to do pre-compiled headers (PCH) on the buildbot for faster build times. However, this currently just makes mainboard's consistent. Change-Id: I2f3fd8a3d7864926461c960ca619bff635d7dea5 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/8085 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-12-03i82801gx: Enable upper CMOS in bootblock.Vladimir Serbinenko
Otherwise checksum may not work correctly on early stages. For compatibility with old bootblocks also enable it early in romstage. Change-Id: Ie541d71bd76af182e445aa5ef21fe5ba77091159 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7556 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-12-02Replace hlt with halt()Patrick Georgi
There were instances of unneeded arch/hlt.h includes, various hlt() calls that weren't supposed to exit (but might have) and various forms of endless loops around hlt() calls. All these are sorted out now: unnecessary includes are dropped, hlt() is uniformly replaced with halt() (except in assembly, obviously). Change-Id: I3d38fed6e8d67a28fdeb17be803d8c4b62d383c5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: http://review.coreboot.org/7608 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-11-09i945: consolidate sb & nb early initsVladimir Serbinenko
Change-Id: I00c2c725de5b982a5e4f584b77b09017a5bc0a72 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7062 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-25i945 boards: Drop disabled ram_check() callsKyösti Mälkki
This code would not get enabled just by flipping the options in menuconfig, also ramcheck() no longer test the range like the parameters would imply. We should add non-destructive ram_check() on S3 resume path to verify memory controller configuration has been properly recovered. Change-Id: Ie4675c4770146c4312cdfbc81afa19f243f90ee4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6027 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-06-20intel/i945 gm45: Use acpi_s3_resume_allowed()Kyösti Mälkki
Change-Id: I7811ee695f35c708144c4af5d43935deb22dd4df Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6061 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-01-22CBMEM: Replace cbmem_initialize() with cbmem_recovery()Kyösti Mälkki
The replacement function confirms CBMEM TOC is wiped clean on power cycles and resets. It also introduces compatibility interface to ease up transition to DYNAMIC_CBMEM. Change-Id: Ic5445c5bff4aff22a43821f3064f2df458b9f250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4668 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
Change-Id: I87b454c748cf885491d5b38bfe53a2ec0e9f38c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3910 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
This retrieves back the value stored with store_initial_timestamp() in the bootblock for southbridge. Change-Id: I377c823706c33ed65af023d20d2e4323edd31199 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3908 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-29lenovo/x60/romstage.c: Collect timestamps in romstagePaul Menzel
Collect early timestamps in Lenovo X60’s romstage. Selecting the option `COLLECT_TIMESTAMPS` in Kconfig and then doing `cbmem --timestamps` should output the timestamps. Change-Id: I7bd30f03a1b85c38e89c19cdf88b2d20b24abed8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3587 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-04Lenovo ThinkPad X60: Clean up `romstage.c`Paul Menzel
1. Move comment for console init to correct place. 2. Start output with capital letter and add full stop at the end. 3. Add missing »)« at the end of description of GPIO 10. 4. Use tabulators instead of spaces. 5. Indent the code automatically using GNU indent [1] with the `-sc` switch adding stars in front of comment blocks as the good indent manual documents. $ indent -linux -sc src/mainboard/lenovo/x60/romstage.c Leave the numbers left aligned as it is more beneficial to be able to run indent without adapting the result afterward. [1] http://www.coreboot.org/Development_Guidelines#Coding_Style Change-Id: I2fa018ec28ff19d23d68754b565c13a7d7a57355 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3185 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Lenovo ThinkPad X60: Init CBMEM early for CBMEM console support.Denis 'GNUtoo' Carikli
Enable `EARLY_CBMEM_INIT` for CBMEM console support by looking how other boards do this. This commit is tested by enabling the CBMEM console (`CONSOLE_CBMEM` in Kconfig) and then in GRUB 2 (as a payload) with the cbmemc command from the cbmemc module and in userspace with ./cbmem -c. Both worked. Change-Id: I34618a55ded7292a411bc232eb76267eec17d91e Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3142 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-01-31X60: fix dockingSven Schnelle
Fix ordering of power/reset/undock procedure to prevent crashes seen with the old code. Also call dlpc_init() only once. Change-Id: I27d1f42e845fcccde40e6ca5af4a7762edab5d36 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/597 Tested-by: build bot (Jenkins)
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-06-15i945 GMA: restore tft brightness from cmosSven Schnelle
Change-Id: Iaf10f125425a1abcf17ffca1d6e246f955f941cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/24 Tested-by: build bot (Jenkins)
2011-06-15i82801gx: replace cafed00d/cafebabe by definesSven Schnelle
We're using '0xcafed00d' all over the code as magic for ACPI S3 resume. Let's add a define for that. Also replace 0xcafebabe by a define. Change-Id: I5f5dc09561679d19f98771c4f81830a50202c69f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/33 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-05X60: use pnp_write_config() instead of custom functionSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6481 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-01X60: add dock code for Ultrabase X6Sven Schnelle
Move the old docking code from romstage.c to dock.c, and use that code both in romstage and SMM code. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6473 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-21[i945] Add SPD adress mappingSven Schnelle
The current code works only with dual channel if Channel 0 uses SPD address 0x50/0x51, while the second channel has to use 0x52/0x53. For hardware that uses other addresses (like the ThinkPad X60) this means we get only one module running instead of both. This patch adds a second parameter to sdram_initialize, which is an array with 2 * DIMM_SOCKETS members. It should contain the SPD addresses for every single DIMM socket. If NULL is given as the second parameter, the code uses the old addressing scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-16Lenovo ThinkPad X60: Enable SMI handlerSven Schnelle
Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Lenovo ThinkPad X60 / X60s SupportSven Schnelle
Adds support for Lenovo X60 series ThinkPads. So far, only X60s (Model 1703) has been tested. It's a basic patch without SMI and ACPI, as this makes it easier to review. SMI and ACPI patches will follow. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 23:50:01 +0000