summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo/t520
AgeCommit message (Collapse)Author
2024-08-09mb/lenovo/t520: Add USB port config into devicetreePuFF1k
Devicetree for lenovo/520 is missing USB ports config, hence they don't work. This change introduces USB port config. Tests performed: - Can select a boot media using a USB keyboard from any port. - Can boot from each port except usb@1:1.1. - Measured read speed from a thumb drive on each port 24.5-28.9 MiB/s. Change-Id: I96dba153a563e0e290b96b837fdca39d7598ef17 Signed-off-by: PuFF1k <exopuf@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-05-06mb/lenovo/*: Set VR12 PSI to fix crashPatrick Rudolph
When in Package C3 or deeper the PSI settings are used to switch the CPU VR into a low power state. It was found that the voltage regulator on the Sandy-Bridge series has non-default PSI settings, compared to Lenovo's Ivy-Bridge series. Apply the same PSI value for PSI2 and PSI3 as the vendor BIOS does to fix a hang when the package is idle. Since neither the vendor BIOS is open-source, nor datasheet exists for the used VR it's unclear why those PSI values must be used and how they influence the regulator. The X220 already has the correct PSI values configured and is now stable for more than 24h in Package C7 state. TEST: Not tested on the affected boards, only checked vendor firmware. Change-Id: Idf8c3719f19f7bcdab30c543215c8abd2669cfd2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-02-18mb/*: Add SPDX headers for cmos.default filesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ib7beed7218f317bc2352b65a6191ef1cdaa0742d Reviewed-on: https://review.coreboot.org/c/coreboot/+/80597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2024-02-18mb/inventec to mb/ocp: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Ib1bbf22480783f63fc2d729b94251e755d2f1720 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80593 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-24mb/lenovo to mb/squared: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I4790adb41cb62c8c8dd44261a2926dfb6350955a Reviewed-on: https://review.coreboot.org/c/coreboot/+/80111 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2024-01-14mb/lenovo/t520: Remove superfluous comments related to PCI devicesFelix Singer
Since all devicetrees from lenovo/t520 are using the reference names for PCI devices now, remove the equivalent comments documenting their function. Change-Id: I307dbf7a7d6fc9086e868d8315ba7a66b94a24e7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-01-14mb/lenovo/t520: Convert remaining PCI numbers into reference namesFelix Singer
Change-Id: I18ce899516fd38b21ded1e3144aa22e705c534b8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79965 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-11-13mb/*: Update SPD mapping for sandybridge boardsKeith Hui
Boards without HAVE_SPD_IN_CBFS: Move SPD mapping into devicetree. Boards with HAVE_SPD_IN_CBFS: Convert to Haswell-style SPD mapping. Change-Id: Id6ac0a36b2fc0b9686f6e875dd020ae8dba72a72 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-11-12mainboards: Drop stale comment about enumerate_buses()Nico Huber
There is no enumerate_buses() today and also no trace of it in our repository. Also, in current terms, mainboard_enable() is called as the very first thing in our enumeration so the comment seems misleading. Change-Id: Iae620f83c8166c1cfc8b9fb9ef4a7025987bf1be Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-10-03mb/lenovo/t520: Move selects from Kconfig.name to KconfigFelix Singer
Selects should be done in the Kconfig file instead of Kconfig.name and not mixed over both files. Change-Id: I6b71c7c5c9e32e21c757c0ed0e9c6bd9d58a4f75 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78131 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-08ec/lenovo/pmh7/chip.h: Use 'bool' instead of 'int'Elyes Haouas
This to fix following error using Clang-16.0.0: /cb-build/coreboot-toolchain.0/clang/LENOVO_W500/mainboard/lenovo/t400/static.c:135:22: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .backlight_enable = 0x01, ^~~~ /cb-build/coreboot-toolchain.0/clang/LENOVO_W500/mainboard/lenovo/t400/static.c:136:23: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] .dock_event_enable = 0x01, ^~~~ Change-Id: Icd35224877fee355e1bbb8a8e838cb047604babb Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-08mb/lenovo: Enable VBOOT_VBNV_FLASHYu-Ping Wu
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with VBOOT_VBNV_FLASH for lenovo boards: t400, t410, t420, t420s, t430, t430s, t520, t530, x131e, x1_carbon_gen1, x60, x200, x201, x220, x230. A 0x2000 RW_NVRAM region is allocated for them, with the COREBOOT size reduced by 0x2000. Also remove the VBOOT_VBNV_OFFSET config, since it's only used for VBOOT_VBNV_CMOS. [1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1 BUG=b:235293589 TEST=./util/abuild/abuild -t LENOVO_T430S -a # with VBOOT enabled Change-Id: I7e29db7eeceec499fbbcf902a26bfe9a2076de40 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-04mb/*: Replace SNB PCI devices with references from chipset.cbArthur Heymans
Removing default on/off from mainboard devicetrees is left as a follow-up. Change-Id: I74c34a97ea4340fb11a0db422a48e1418221627e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69502 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-01-13mb/lenovo/t520: Disable SATA2 and Thermal on W520Angel Pons
If a discoverable device (e.g. a PCI device) does not appear in the devicetree (typically because it is removable), coreboot enables it by default. Disable the SATA2 (device for SATA ports 4 and 5, which is not used in AHCI mode) and Thermal devices on W520 as well. Both devices were only disabled on the T520. Tested, this change fixes a long boot time when using MrChromebox's edk2 payload on the W520, likely related to the following errors: AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 0 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 1 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 2 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 3 AHCI: Error interrupt reported PxIS: 40000001 Non data transfer failed at retry 4 Change-Id: I0b0483aae05fa84d97987a93db634b740f830e18 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71857 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-13mb/lenovo/t520: Also disable PCI bridge on W520Angel Pons
As per Kendo3-WS schematics, the conventional PCI bridge is not used. Change-Id: Ic3aa11cc3a3028c31b06ad8f74875db8c5626a89 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71856 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-30nb/intel/sandybridge: Add a chipset devicetreeArthur Heymans
This only moves CPU configuration to a common place. Other PCI devices can be done in follow-ups. Change-Id: I9c5b6f25b779e28b6719cf70455ff0f1a916ad87 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56912 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-22mb/lenovo/*/mainboard.c: Clean up includesElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I406f21c0c05e6af357e45e718422be94c6fd5408 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-05-03lenovo: correct typo in macro H8_HAS_BAT_THRESHOLDS_IMPLPeter Lemenkov
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Change-Id: Ia0550a115d75183cd72e478ae739731001febe22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-04-21tpm: Refactor TPM Kconfig dimensionsJes B. Klinke
Break TPM related Kconfig into the following dimensions: TPM transport support: config CRB_TPM config I2C_TPM config SPI_TPM config MEMORY_MAPPED_TPM (new) TPM brand, not defining any of these is valid, and result in "generic" support: config TPM_ATMEL (new) config TPM_GOOGLE (new) config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE) config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE) What protocol the TPM chip supports: config MAINBOARD_HAS_TPM1 config MAINBOARD_HAS_TPM2 What the user chooses to compile (restricted by the above): config NO_TPM config TPM1 config TPM2 The following Kconfigs will be replaced as indicated: config TPM_CR50 -> TPM_GOOGLE config MAINBOARD_HAS_CRB_TPM -> CRB_TPM config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE Signed-off-by: Jes B. Klinke <jbk@chromium.org> Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-04sb/intel: Use `bool` for PCIe coalescing optionAngel Pons
Retype the `pcie_port_coalesce` devicetree options and related variables to better reflect their bivalue (boolean) nature. Change-Id: I6a4dfe277a8f83a9eb58515fc4eaa2fee0747ddb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60416 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15mainboard: Drop invalid `VGA_BIOS_FILE` defaultsAngel Pons
If the VGA BIOS file path for `VGA_BIOS_FILE` in a mainboard's Kconfig does not exist in the coreboot tree (including submodules), drop it. These files should be stored in the `site-local` subdirectory and the paths specified for each board in `site-local/Kconfig`. For example: config VGA_BIOS_FILE default "site-local/x200_vbios.bin" if BOARD_LENOVO_X200 Note that this is just an example. There are better ways to structure one's `site-local` subfolder. Using the `CONFIG_MAINBOARD_DIR` option would be one of them, though variants may still need special handling. Also, update autoport to not generate `VGA_BIOS_FILE` defaults. Change-Id: I1b5dfba035a42d7943f270f95fb7d32b285584d2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-09-08mb/lenovo/t520: Fix T520 override treeNico Huber
`chip` entries always need a device node below them to actually get hooked up. Change-Id: I4781d6afdcd92f21872f3059b417483107129bf4 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57470 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `VARIANT_DIR` onceAngel Pons
Specify the type of the `VARIANT_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: Iea2f992a59e41e00fec3cdc9d6a13b5f3ab0a437 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `OVERRIDE_DEVICETREE` onceAngel Pons
Specify the type of the `OVERRIDE_DEVICETREE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I4cbf4e318a30f0cf75aa8690e7454b9caa115c9d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56556 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07bd82x6x boards: Drop redundant `c2_latency`Angel Pons
If unspecified, chipset code already uses 101, and 0x65 == 101. Change-Id: I524ca492fa577003df23017756f74a455582132f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-05-18mainboard: Use decimal for `device lapic 0x0 on`Angel Pons
Most boards use `device lapic 0 on` with zero written in decimal. For the sake of consistency, update the remaining boards to follow suit. Change-Id: I1d3b1ac107e33aae11189cdd5e719b8e48b10f08 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-04-05sandybridge boards: Drop default `pci_mmio_size`Angel Pons
2 GiB is the default already. Change-Id: I294460949659c97d4e19ad4e9d14f8c3566cca3f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52071 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-07sb/intel/bd82x6x: Support ME Soft Temporary Disable ModeEvgeny Zinoviev
- Add support for ME Soft Temporary Disable Mode. In this mode, ME doesn't load its kernel and freezes at Bring UP (BUP) phase. This mode is saved in ME NVRAM (and thus will remain for next reboots and poweroffs). - Add support of new CMOS option for Sandy Bridge and Ivy Bridge ThinkPads. HOW TO USE To disable ME: 1. nvramtool -w me_state=Disabled 2. reboot To enable it back: 1. nvramtool -w me_state=Normal 2. reboot To check current status: intelmetool -m Tested on ThinkPad X230 and ThinkPad X220. BACKGROUND There's no Intel documentation that would explain how this should be implemented, in public. Working binary sequence for MKHI command to put ME in Soft Temporary Disable Mode, as well as a way to bring ME out of it (by writing to H_GS register), was found and published by researchers from PT Security: 1. To disable ME, BIOS issues the disable command (before End of Post) and reboots. ME is supposed to be disabled on the next boot after DID (DRAM Init Done). My numerous tests show that issuing the command and rebooting is not enough. If we reboot too early, ME will not be disabled. Apparently, it is doing something in background after receiving the command. It works with a delay of 500-1000 ms. I also tried to dump all known (documented) registers, such as GMES and HFS, before and during the next 2 seconds after execution of the disable command to find a possible indication that something's changed in ME and we're ready to reboot. Found nothing unfortunately. 2. To enable ME back, host writes value 0x20000000 to H_GS. PT slides don't contain any more information on it, but my tests show, that after writing this value, GMES[31:28] is changing from 0x01 (BUP phase) to 0x03 (Policy Module) to 0x06 (Host Communication). Then, after some more time, fw_init_complete bit of HFS becomes 1. This means that ME starts loading its kernel immediately, without reboot. On the other hand, Lenovo BIOS clearly perform a reboot after enabling it (one reboot after saving the settings, then ThinkPad logo appears, and then one more reboot). I'm assuming we have to reset too. Change-Id: Ic01526c9731cbef4e8552bbc352133a2415787c2 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-27ACPI: Add top-level ASLKyösti Mälkki
Objects that are created with acpigen need to be declared with External () for the generation of dsdt.asl to pass iasl without errors. There are some objects that are common to all platforms, and some that should be declared only conditionally. Having a top-level ASL helps to achieve this. Change-Id: Ibaf1ab9941b82f99e5fa857c0c7e4b6192c74330 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-24mb/lenovo/t520: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: Ice7cfc263c339ba9ec3705c1cee44a6d69f2e4d3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-01-24arch/x86: Use wildcard for mb/smihandler.cKyösti Mälkki
Change-Id: I306f8cd74af62c0cd30f445d20c47f774f122481 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49247 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-18ACPI: Select ACPI_SOC_NVS only where suitableKyösti Mälkki
Having some symmetry with <soc/nvs.h> now allows to reduce the amount of gluelogic to determine the size and cbmc field of struct global_nvs. Since GNVS creation is now controlled by ACPI_SOC_NVS, drivers/amd/agesa/nvs.c becomes obsolete and soc/amd/cezanne cannot have this selected until <soc/nvs.h> exists. Change-Id: Ia9ec853ff7f5e7908f7e8fc179ac27d0da08e19d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lance Zhao
2021-01-10mb/x/acpi_tables: Rename to mainboard_fill_gnvs()Kyösti Mälkki
Rename acpi_create_gnvs() functions under mb/ to reflect their changed functionality. Remove now empty mb/acpi_tables.c files. Change-Id: Ia366867ef73d1ade9805dc29b8e14b3073f44f60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48707 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06cpu/intel/model_206ax: Rename `cX_acpower` optionsAngel Pons
They aren't specific to AC power operation anymore. Also adapt autoport. Change-Id: Ib04d0a08674b7d2773d440d39bd6dfbd4359e0fb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49089 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06cpu/intel/model_206ax: Unify ACPI C-state optionsAngel Pons
All mainboards use the same values for AC and battery, even desktop boards without a battery. Use the AC values everywhere and drop the battery values. Subsequent commits will rename the AC power options accordingly, and will also clean up the corresponding acpigen code. This is intentional so as to ease reviewing the devicetree changes. Also update util/autoport accordingly. Change-Id: I581dc9b733d1f3006a4dc81d8a2fec255d2a0a0f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-23mb/**/cmos.layout: Indent everything with tabsAngel Pons
Time has shown that using spaces never converges into proper alignment. Change-Id: I5338aeaf139580f9eab3e1e02cb910080a95d2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-23mb/**/cmos.layout: Remove crusty commentsAngel Pons
Most of these comments have been copy-pasted or serve no purpose other than to eventually turn into misleading info. While the description of the first 120 bits of CMOS could be useful, it should instead be added to the documentation for the CMOS option infrastructure, or /dev/null. Moreover, trim down newlines to no more than two consecutive newlines. Change-Id: I119b248821221e68c4e31edba71ba83b7d2e14e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-09-08nb/intel/sandybridge: Use an enum for `gpu_panel_port_select`Angel Pons
All boards currently have backlight on either LVDS or eDP. Change-Id: I878bc7f1ff75a2b82b9556e855aff1d4d03e0268 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-07-28mb/lenovo/*/acpi/superio.asl: Replace with GPLv2+ equivalentPeter Lemenkov
Replace functionally identical files with t440p/acpi/superio.asl which is licensed under more flexible terms (GPL-2.0-only or no licensing terms vs. GPL-2.0-or-later). Apart from licensing terms these files are identical. This makes diff between boards smaller. Change-Id: I1cd4a85b65ceaa0a383416e7276ad41a41783cb7 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43685 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/lenovo: Prepend EC event number with 0x to denote hex notationPaul Menzel
Currently, the message below is printed, suggesting it’s decimal notation: coreboot-4.12-1530-g7acbd5fc45 Sun Jul 19 07:47:58 UTC 2020 smm starting (log level: 7)... EC event 48 GPI (mask 1000) Prepend 0x, so it’s clear it’s hexadecimal notation. EC event 0x48 Use the command below change all places: git grep -l 'EC event %02x' | xargs sed -i 's/EC event %02x/EC event %#02x/' Change-Id: I8d1e6434a0e550c5a19576f9f7fea05e7a812e49 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-30ACPI: Drop typedef global_nvs_tKyösti Mälkki
Bring all GNVS related initialisation function to global scope to force identical signatures. Followup work is likely to remove some as duplicates. Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-06-15sandybridge boards: Factor out MAX_CPUSAngel Pons
Also update autoport accordingly. Change-Id: I12481363cf0e7afc54e2e339504f70632e8d72e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41839 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-26ec/lenovo/h8: Config the ec hardware ids for newer thinkpadsDa Lao
Currently coreboot is using the ec hardware id IBM0068 for all thinkpads, but for newer thinkpads the id maybe LEN0068 or LEN0268. On Windows, the Lenovo Vantage app can't get battery details when using IBM0068. This patch config this id by motherboard. The hardware IDs for the following models can be found by searching for disassembled dsdt.asl on vendor BIOS: (But this info is not easy to find online. So I only changed some of the thinkpads.) T420: https://github.com/tluck/Lenovo-T420-Clover/blob/master/EFI/CLOVER/ACPI/1600x900-EDID/DSDT.edid-2e2-hs.dsl LEN0068 T430: https://github.com/ThiagoSchetini/macosx-thinkpad-t430/blob/master/vanilla%20ACPI%20dsl's/DSDT.dsl LEN0068 T520: Confirmed by Patrick Rudolph LEN0068 W520: Confirmed by Patrick Rudolph LEN0068 T530: Confirmed by Prasun Gera LEN0068 W530: https://bugzilla.kernel.org/show_bug.cgi?id=66731 LEN0068 X230/X230T: https://github.com/tuandzung/ThinkPad-X230-macOS-10.12.x/blob/master/DSDT/DSDT.dsl LEN0068 T440p: https://github.com/doudou/t440p/blob/master/acpi/2.30/dsdt.dsl LEN0068 Signed-off-by: Da Lao <dalao@tutanota.com> Change-Id: I797080ec8ba7ce39d47fe587319f8f32d6938875 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-05-22mb/lenovo/t520: Add support for ThinkLightStefan Ott
With this patch, the ThinkLight on the ThinkPad T520 can be controlled through the OS. The same change was done for the ThinkPad X200 in b45912f4: mb/lenovo/x200: Add support for ThinkLight After applying this patch, the light can be controlled like this: echo on >/proc/acpi/ibm/light echo off >/proc/acpi/ibm/light Or through sysfs at /sys/class/leds/tpacpi::thinklight Unfortunately I do not own a T520 to test this. Change-Id: Iffc5dd2f23ee4896da633c18cbbf22c9e448edf1 Signed-off-by: Stefan Ott <stefan@ott.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04treewide: Drop ACPI_VIDEO_DEVICE macroAngel Pons
It was always defined to the same value, and only used twice. Change-Id: I2736eb7ea2cf15475f7bb99d7d12450730eb8be0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40864 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-14mb/lenovo: Add additional FMAPs on 8MiB devicesMarcello Sylvester Bauer
* Add FMAP for measured boot only, with a single RO partition. * Add FMAP for measured boot only, with a single RO partition but where the ME has been shrunken. Tested on X220 using VBOOT+measured boot: * Used patched IFD and ME, boots into OS Change-Id: I04c1add13198444638c669deec1e05159b1a09c9 Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
2020-04-14mainboard/lenovo: Use the original hardware ids for keyboard/pointingdalao
Currently coreboot is using the compatible ID PNP0303 for all keyboards and PNP0F13 for all pointing devices, which causes some problems. On Windows, the touchpad driver can't be automatically matched and installed through Windows Update. On Linux, there are some strange issues. So it's better to use the original hardware IDs for each model. The hardware IDs for the following models can be found By searching for dmesg logs on vendor BIOS: T60: https://mail.gnome.org/archives/networkmanager-list/2012-January/msg00110.html Keyboard: PNP0303 Pointing: IBM0057 R60: https://openbenchmarking.org/system/1202279-AR-COMPRESS715/Lenovo%20R60/dmesg Keyboard: PNP0303 Pointing: IBM0057 X60: https://github.com/pavelmachek/missy/blob/master/db/notebook/lenovo/thinkpad/x60/pavel/2018.3648803539788/dmesg.out Keyboard: PNP0303 Pointing: IBM3780 X200: https://ubuntuforums.org/showthread.php?t=1833248&page=2 Keyboard: LEN0010 Pointing: IBM3780 T400: https://github.com/heradon/libreboot-fork/blob/master/docs/future/dumps/logs-t400-bios2.02-ec1.01/dmesg.log Keyboard: LEN0010 Pointing: IBM3780 T510: https://bbs.archlinux.org/viewtopic.php?id=120287 Keyboard: PNP0303 Pointing: LEN0015 T410: https://forum.ubuntuusers.de/topic/kein-sound-109/ Keyboard: PNP0303 Pointing: LEN0015 T420: https://linux-hardware.org/index.php?probe=e6a094ade5&log=dmesg Keyboard: PNP0303 Pointing: LEN0015 T420s: https://bbs.archlinux.org/viewtopic.php?id=191510 Keyboard: PNP0303 Pointing: LEN0015 T520: https://bbs.archlinux.org/viewtopic.php?id=195636 Keyboard: PNP0303 Pointing: LEN0015 W520: https://linux-hardware.org/index.php?probe=9306cac54c&log=dmesg Keyboard: PNP0303 Pointing: LEN0015 T430: https://github.com/farjump/fwtr/blob/master/lenovo/thinkpad-t430/2347ds2/lenovo/g1et73ww-2.09/fwts/20160218_174223/dmesg.log Keyboard: PNP0303 Pointing: LEN0015 T430s: https://linux-hardware.org/index.php?probe=01545dc8fb&log=dmesg Keyboard: PNP0303 Pointing: LEN0015 T530: https://forums.fedoraforum.org/showthread.php?316640-Fedora-27-High-CPU Keyboard: LEN0071 Pointing: LEN0015 W530: https://bugs.freedesktop.org/attachment.cgi?id=115557 Keyboard: LEN0071 Pointing: LEN0015 L520: https://pastebin.com/U6MaBAY3 Keyboard: PNP0303 Pointing: LEN0017 X201: https://linux-hardware.org/index.php?probe=d7085ee4c8&log=dmesg.1 Keyboard: PNP0303 Pointing: LEN0018 X220: https://bbs.archlinux.org/viewtopic.php?id=237669 Keyboard: PNP0303 Pointing: LEN0020 X230: https://forums.bunsenlabs.org/viewtopic.php?id=2460 Keyboard: PNP0303 Pointing: LEN0020 X131e: https://linux-hardware.org/index.php?probe=d765880811&log=dmesg Keyboard: MSF0001 Pointing: LEN0026 X1 Carbon Gen 1: https://bugzilla.kernel.org/show_bug.cgi?id=85851 Keyboard: LEN0071 Pointing: LEN0030 s230u: https://launchpadlibrarian.net/147231958/dmesg-reboot.txt Keyboard: PTL0001 Pointing: LEN0031 T540p: https://linux-hardware.org/index.php?probe=da766a30bc&log=dmesg Keyboard: LEN0071 Pointing: LEN0034 X240: https://linux-hardware.org/index.php?probe=fa7155b0e4&log=dmesg Keyboard: LEN0071 Pointing: LEN0035 T440p: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Keyboard: LEN0071 Pointing: LEN0036 T440s: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Keyboard: LEN0071 Pointing: LEN0036 T450: https://gist.github.com/kzar/1c38630eb22e4bf5b976 Keyboard: LEN0071 Pointing: LEN200e Others: https://github.com/torvalds/linux/blob/master/drivers/input/mouse/synaptics.c Test result: This can make Windows automatically install the Lenovo touchpad driver. It also fixes the T440p touchpad issue. Change-Id: Ifb635da99c5e05f987aaf4f172108d788dcc2932 Signed-off-by: dalao <dalao@tutanota.com> Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36371 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-04mainboard/lenovo: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I7b7670bb541cf4814fd4958d5c0d8c68cbee80c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-03-29drivers/intel/gma/acpi: Provide default definition for displaysNico Huber
Use it wherever the standard numbers were copied to. Bit 31 is set at runtime unconditionally, so we don't need it here. Change-Id: I0d853c3b8250a2c7b2d1a91985a555e4b17ad76c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39731 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-24drivers/intel/gma: Ditch `link_frequency_270_mhz` settingNico Huber
The `link_frequency_270_mhz` setting was originally used by the native graphics init code for Sandy/Ivy Bridge, which is long gone. The value of this information (which board had it set) is questionable. The only board that had an LVDS panel and set it to 0 was the ThinkPad L520, where native graphics init was never reported to work. Also, the native graphics init only used it for calculations, but never confi- gured the hardware to use a specific frequency. A look into the docu- mentation also doesn't reveal any straps that could be used to confi- gure it. Change-Id: Ieceaa13e4529096a8ba9036479fd84969faebd14 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-or-laterAngel Pons
Change-Id: I78f06b54a6a03d565cf86f1d7bdf37965c3f6ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-18mainboard/[g-p]*: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I426518e8e18de1c8efcfb7ecb0835df3e257dca1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39608 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-093rdparty/libgfxinit: Update submodule pointerNico Huber
Changes allow to use the integrated panel logic (power sequen- cing and backlight control) for more connectors. The Kconfigs GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set to any port, e.g. config GFX_GMA_PANEL_1_PORT default "DP3" Now that the panel logic is not tied to the `Internal` port choice anymore, we can properly split it into `LVDS` and `eDP`. This also adds Comet Lake PCI IDs which should still work the same as Kaby and Coffee Lake. Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06mb/lenovo: Remove thermal.h headerPeter Lemenkov
We include it only in one file. So let's simplify everything and do like autoport does. Change-Id: I71f092ed7582b4931122d72f41d0b42a7569b96e Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-02-01mb/lenovo/t520: Switch to overridetreePeter Lemenkov
Change-Id: If6be9cffe97dcd8f733e3bd5a67a408dd817005a Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37295 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28mb/lenovo: Remove unnecessary whitespace in commentsPeter Lemenkov
This makes diff between boards even smaller in some cases. Change-Id: I42ecaf5de657275708ddaf2c926fe31fe16a7220 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-01-02mb/**/hda_verb.{c,h}: use denary numerals for codec IDsAngel Pons
Denary, also known as "decimal" or "base 10," is the standard number system used around the world. Therefore, make use of it. Change-Id: I7f2937bb7715e0769db3be8cb30d305f9d78b6f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-28mb/lenovo/*/acpi_tables: Don't initialize already initialized fieldsPeter Lemenkov
Don't initialize fields with zeroes since gnvs structs were zeroed out in southbridge already. Change-Id: I2ccf4699ba3ed3f5b9402c0340153d4a5bf82682 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-27mb/*/*/acpi_tables: Remove unnecessary function callPeter Lemenkov
Remove acpi_update_thermal_table local function. Change-Id: I4857348088feb8eaf1dd7f553c4efb29da8943cf Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36212 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-20src/mainboard: Remove unused '#include <device/pci.h>'Elyes HAOUAS
Change-Id: I5791fddec8b2387df5979adbb1a0fa64c5dd23ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-12mb/**/hda_verb.c: Clean up formattingAngel Pons
Change-Id: Ibe2d92990d0074266aa05ada749e9dad55e609a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-11mb/**/hda_verb.c: use denary numerals for lengthsAngel Pons
Denary, also known as "decimal" or "base 10," is the standard number system used around the world. Therefore, make use of it. Change-Id: Ia22705d7629a322292cfd557add9cfadc649c16c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37537 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-06mb/lenovo/w520/devicetree: Use subsystemid inheritancePeter Lemenkov
Change-Id: If7816992e717b4da585b16e5bbe67610c9af867d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-06mb/lenovo/t520/devicetree: Use subsystemid inheritancePeter Lemenkov
Change-Id: Iffeb634c73f58aa1cddac5210d75fda75a3d5e92 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37293 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
Kconfig became stricter on what it accepts, so accomodate before updating to a new release. Change-Id: I92a9e9bf0d557a7532ba533cd7776c48f2488f91 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37156 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2019-11-18mb/{gigabyte,lenovo}: Remove spurious setting of ETR3 bit 16Nico Huber
This bit is used to indicate xHCI routing across reboots. If anything, coreboot should act on it, not set it during boot. ASL code would be supposed to set it. Change-Id: Id14647ac4e591cfa042ca8aad6dfc6ccda35c74a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18nb/intel/sandybridge: Set up console in bootblockArthur Heymans
Change-Id: Ia041b63201b2a4a2fe6ab11e3497c460f88061d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
There is some overlap between romstage and bootblock. LPC setup and BAR initialization is now done twice. The rationale is that the romstage should not depend too much on the bootblock, since it can reside in a RO fmap region. Enabling the console will be done in a followup patch. Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18sb/intel/bd82x6x: Make the pch_enable_lpc hook optionalArthur Heymans
This also changes the name to mainboard_pch_lpc_setup to better reflect that it is an optional mainboard hook. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: Ie8e6056b4c4aed3739d2d12b4224de36fe217189 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Make the mainboard_rcba_config hook optionalArthur Heymans
This also changes the name to mainboard_late_rcba_config to better reflect what it does. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I1897d0f5ca7427d304a425f5256cd43c088ff936 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-12ec/lenovo/h8: Make dock init in ramstage fully mainboard-specificBill XIE
Discussed in CB:36093, in the past many lenovo boards need to declare an empty h8_mainboard_init_dock() to satisfy h8.c. Now the confusing H8_DOCK_EARLY_INIT might be retired, and if a mainboard needs dock init (done with h8_mainboard_init_dock() in the past) in ramstage, (discussed in CB:4294 where H8_DOCK_EARLY_INIT is introduced) it can just do it in its own chip_ops.enable_dev function. Tested on X200. Testing on other affected targets may be necessary. Change-Id: I5737406d1f6cb6e91b2e2fa349a206a3dba988d1 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-04mb/*/*{bd82x6x/ibexpreak}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: I36095422559e6c160aa57f8907944faa4c192dee Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-16sb/intel/bd82x6x/lpc: Set up default LPC decode rangesArthur Heymans
This sets up some common default LPC decode ranges in a common place. This may set up more decode ranges than needed but that typically does not hurt. Mainboards needing additional ranges can do so in the mainboard pch_enable_lpc hook. Change-Id: Ifeb5a862e56f415aa847d0118a33a31537ab8037 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-08-20mb,autoport: Fix GCC 9 Port_List build errorJacob Garber
Port_List is an array of 8 elements, and GCC 9 is warning that there are no 'others' when all 8 elements are explicitly initialized, which is causing the build to fail. Remove the 'others => Disabled' clause to silence this. Change-Id: Id082e7a76641438f3fb4c4d976dbd254a7053473 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34918 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19sb/intel/{bd82x6x|ibexpeak}: Drop p_cnt_throttling_supportedPatrick Rudolph
The processor P_BLK doesn't support throttling. This behaviour could be emulated with SMM, but instead just update the FADT to indicate no support for legacy I/O based throttling using P_CNT. We have _PTC defined in SSDT, which should be used in favour of P_CNT by ACPI aware OS, so this change has no effect on modern OS. Drop all occurences of p_cnt_throttling_supported and update autoport to not generate it any more. Change-Id: Iaf82518d5114d6de7cef01dca2d3087eea8ff927 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-18mb/*/*/gpio: Use static for const structuresPeter Lemenkov
Autoport generates these structures as static so let's make it consistent. See also commit 128205fd with Change-Id I83382d38a4a3b7ed11b8e7077cc5fbe154e261a7 ("autoport/bd82x6x.go: Improve gpio.c generation"). Change-Id: I4e07bd755ca4a65b76c69625d235a879fe7b43cb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33524 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-21sb/intel/bd82x6x: Set up io_gen_dec in romstage based on devicetreeArthur Heymans
Set up generic decode ranges based on the devicetree settings. Change-Id: Ie59b8272c69231d6dffccee30b4d3c84a7e83e8f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-19mb/lenovo/*/romstage: Remove unused include byteorder.hPeter Lemenkov
Change-Id: I3e500aafd26b7524a6782883b9a30f55b544102d Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33511 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-16mb/lenovo/*/smihandler: Remove unused includePeter Lemenkov
All usage of pci_read_config8 was removed in commit d44d4f0f with Change-Id Ia959eb5b747846048396e66d4c926c96c27f3878 ("mb/lenovo/*: Remove useless smihandler code"). So we don't need this include anymore. Change-Id: Ic4f038c80e17799016ae7e92a5675cfe7c71e400 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-06-08mb/lenovo/t430: Fix Dual GraphicsPatrick Rudolph
* Select ONBOARD_VGA_IS_PRIMARY in driver/lenovo/hybrid_graphics to fix disabling iGPU in 'Dual Graphics' on Lenovo T430. * Remove ONBOARD_VGA_IS_PRIMARY in mainboards that already select DRIVERS_LENOVO_HYBRID_GRAPHICS. Change-Id: I6594fbb957c9a8135fe670d38b5755adf29d2dff Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-03mb/lenovo/*: Remove useless smihandler codeArthur Heymans
This code to handle the brightness from SMM is copied from the Lenovo Thinkpad X60 code, but does not work on later generation. The PCI device it tries to address does not even exist on those devices. Change-Id: Ia959eb5b747846048396e66d4c926c96c27f3878 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33138 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-30mb/lenovo/*20*: Remove default FMAPNico Huber
These boards don't need a default FMAP. Moreover, having a default FMAP disables automatic integration of optional regions like `CONSOLE`. Also, these files contain an error: `COREBOOT` isn't placed at the top of the image. Resulting in default builds without a reset vector ;) Change-Id: If6331e19955034c02828e88902a5934c34d3e784 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33110 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-25mb/lenovo: Unify thermal threshold handlingPeter Lemenkov
Unify thermal handling across Lenovo boards (except g505, which is different). Namely, do the following: * Move thermal levels from acpi_tables to thermal.h (and create if necessary). * Don't use board-specific ifdef guards. * Set thermal levels using dedicated acpi_update_thermal_table function as almost all Lenovo boards do. * Update list of authors in comments. Merge all author's entries. * Minor whitespace and formatting. This makes diff -ruw between the Lenovo boards smaller. Change-Id: If569f67c932b7fbf14893b890a5588df4994daeb Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29659 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-08mb/lenovo/t520: Fix devicetreePatrick Rudolph
Disable unused PCI devices. Reduces idle power by around 0.5Watt. Tested on Lenovo T520. Change-Id: I6990dc5810084261b75d2a327b6a103be44fd4cc Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-05-08mb/lenovo/*: Add support for VBOOT on 8MiB devicesPatrick Rudolph
Enable VBOOT support on all devices that have a 8 MiB flash, using a single RW_MAIN_A partition, allowing the use of tianocore payload in both RW_MAIN_A and WP_RO. * Add VBNV section to cmos.layout * Add FMAP for VBOOT and regular boot * Select Kconfigs for VBOOT * Enable VBOOT_SLOTS_RW_A by default Also build test VBOOT on Lenovo T420. Tested on Lenovo T520 using Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6. Change-Id: Icb7b263ed86551cc53e1db7babccaca6b3ae2fe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-07mb/lenovo: Add SMBIOS type 9 for ExpressCardPatrick Rudolph
Mark all known PCIe root ports as ExpressCard slot. Tested on Lenovo T520. Change-Id: I43fb481512a54ee054c6fd0189053028fb3c3ec2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32309 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-19src/mb/Kconfig: Fix PCI subsystem IDsElyes HAOUAS
References to MAINBOARD_PCI_SUBSYSTEM_{DEVICE_ID,VENDOR_ID} were removed in commits dbd3132 sb/intel/{i82801g/i/j,bd82x6x}: Make use of generic set_subsystem() 00bb441 sb/intel/lynxpoint: Remove PCI bridge function Change-Id: I72bba8406eea4a264e36cc9bcf467cf5cfbed379 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32107 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 18:31:00 +0000