coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2012-07-24	Move GGL0001 ACPI code to generic ChromeOS code	Stefan Reinauer
	The only difference in this code on all our platforms is the array describing the GPIOs. Hence, only keep that array in the mainboard ChromeOS directory and move everything else to generic ChromeOS ACPI code. Change-Id: I9fc75842af64530c1255bea1c5f803c5316d6da6 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1278 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-02	ChromeOS: drop unused debug header description	Stefan Reinauer
	No part of ChromeOS seems to use the debug header description, so drop it to make sure it does not get copied around wrongly. Change-Id: Icb0baedbf6112f11289b2ddd9618a955a424ddf7 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/989 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-01	Set up ChromeOS dev mode, recovery, and write protect GPIOs on Emerald Lake 2.	Gabe Black
	The Emerald Lake 2 CRB wasn't designed with ChromeOS in mind, so there aren't any actual developer mode, recovery mode, or write protect switches, let alone GPIOs to read them from. Instead, I've commandeered signals connected to GPIOs which are for other things but which aren't used by hardware or, for instance, the EC to do something Coreboot doesn't control. The recovery mode switch is connected to GPIO 22 and is called BIOS_REC on the schematic. The name is at least very reminiscent of the right thing even if it's supposed to be used for something else. There's a jumper on the board labelled J8G1 which can force the line to ground, and if not, there's a switch on the front of the case which toggles its value. "RECOVER" is for recovery mode and "KEEP" is for normal mode. The developer mode switch is connected to GPIO 57 and is called SV_DET on the schematic. It's connected to a jumper labelled J8E2 on the board and, as far as I can tell, can't be controlled in any other way. When the jumper is in place and the pins are shorted, developer mode is selected. When the jumper is removed, normal mode is selected. The write protect is connected to GPIO 48 which is called BIOS_RESP on the schematic. It's connected to a jumper labelled J8E3 which, like j8E2, seems to be the only way to control the line it's on. When the jumper is in place, write protect is "disabled", and when it's in place it's "enabled" even though there's no functional difference. The input for the recovery mode switch was chosen because of the name it already had on the CRB, BIOS recovery, and because there's a switch to control it on the front of the case which makes it easy to get at. The jumpers for developer mode and recovery mode were chosen because there weren't very many options available, and of those these were next to each other which should make them easier to find and work with. It might be a good idea to wire toggle switches up to the pins of those jumpers so they'll be easy to identify, can be labelled, and would be easier to work with than little jumpers in the middle of the motherboard. Change-Id: Ib2c3dc05077dacfbede596dae143ed81a99dbebd Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/965 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01	Fix Sandybridge/Ivybridge mainboards according to code review	Stefan Reinauer
	This fixes a few cosmetics with the following three boards: - Intel Emerald Lake 2 - Samsung ChromeBook - Samsung ChromeBox The following issues were fixed: - rely on include path in ASL code instead of specifying relative paths - use updated ALIGN_CURRENT in acpi_tables.c - use preprocessor defines instead of hard coded values where possible Change-Id: Ia5941be3873aa84c30c13ff2f0428d1c52daa563 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/963 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-04-30	Add support for Intel Emerald Lake 2 CRB	Stefan Reinauer
	This adds support for Intel's Emerald Lake 2 board. Change-Id: Ifaeeac9d52fe655324ee29df5f7187b89b35f73a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/951 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>