summaryrefslogtreecommitdiff
path: root/src/mainboard/hp
AgeCommit message (Collapse)Author
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-23sb/intel/bd82x6x: Reduce function-disable messNico Huber
Most affected boards set the function disabled (FD) register to an arbitrary state dumped from systems running the vendor BIOS. This makes it impossible to enable the devices in devicetree and a pretty big mess of course because nobody cared to keep the register in sync with the devicetree. To get completely rid of most of the writes to FD, move setting of PCH_DISABLE_ALWAYS into the southbridge code where it belongs. Change-Id: Ia2a507cbcdf218d09738e2e16f0d3ad1dcf57b8b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/23255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hal Martin <hal.martin+coreboot@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bill XIE <persmule@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-01-18Intel i82810 boards & chips: Remove - using LATE_CBMEM_INITKyösti Mälkki
All boards and chips that are still using LATE_CBMEM_INIT are being removed as previously discussed. If these boards and chips are updated to not use LATE_CBMEM_INIT, they can be restored to the active codebase from the 4.7 branch. chips: northbridge/intel/i82810 Mainboards: src/mainboard/asus/mew-am src/mainboard/asus/mew-vm src/mainboard/ecs/p6iwp-fe src/mainboard/hp/e_vectra_p2706t src/mainboard/intel/d810e2cb src/mainboard/mitac/6513wu src/mainboard/msi/ms6178 src/mainboard/nec/powermate2000 Change-Id: Ib273316c59f499e6cd3a0e4c4dc4c2cce94ff291 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/23300 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-12mainboard/hp: Add Elitebook Revolve 810 G1Bill XIE
The code is based on autoport and that for 8470p. Tested: - CPU i5-3437U - Slotted DIMM 8GiB - Soldered RAM 4GiB from Hynix (There may be more models here) - Onboard USB2 interfaces (digitizer, wlan slot, wwan slot, camera) - Mini pci-e on wlan slot - On board SDHCI connected to pci-e - USB3 ports - USB3 hub on dock (connected to USB3 port 1) - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.13.13-1 within Debian GNU/Linux testing, loaded from SeaBIOS, or Linux payload (Heads) Not work: - An "NFC" device connected to LPC Not implemented yet: - Detecting the model of Soldered RAM at runtime, and loading the corresponding SPD datum (3 observed) from CBFS Change-Id: Iba9c361591697e6a2b3b7b485f7f1649c2a83524 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-25mb/hp: Add CMOS support for all HP Elitebook modelsIru Cai
The cmos.layout files are copied from lenovo/x230 with EC options removed. It's tested on 8470p and the power_on_after_fail option works. Change-Id: I0a50a25798fd31b7acccf9872c50dac2718ce895 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-20intel/bd82x6x: Use generated ACPI PIRQTobias Diedrich
Enable change Ic6b8ce4a9db50211a9c26221ca10105c5a0829a0 (sb/intel/common: Automatically generate ACPI PIRQ) for BD82X6X. This generates the main ACPI _PRT table automatically based on the chipset registers. Tested on Intel NUC DCP847SKE with Linux 4.13.14: $ cat /proc/interrupts CPU0 CPU1 0: 23 0 IO-APIC 2-edge timer 8: 1 0 IO-APIC 8-edge rtc0 9: 0 0 IO-APIC 9-fasteoi acpi 19: 86 0 IO-APIC 19-fasteoi ehci_hcd:usb1 23: 0 0 IO-APIC 23-fasteoi i801_smbus [...MSI and other interrupts skipped...] Log messages: ACPI_PIRQ_GEN PCI: 00:02.0: pin=1 pirq=1 ACPI_PIRQ_GEN PCI: 00:1b.0: pin=1 pirq=1 ACPI_PIRQ_GEN PCI: 00:1c.0: pin=1 pirq=2 ACPI_PIRQ_GEN PCI: 00:1c.1: pin=2 pirq=6 ACPI_PIRQ_GEN PCI: 00:1c.2: pin=3 pirq=4 ACPI_PIRQ_GEN PCI: 00:1d.0: pin=1 pirq=4 ACPI_PIRQ_GEN PCI: 00:1f.2: pin=1 pirq=2 ACPI_PIRQ_GEN PCI: 00:1f.3: pin=2 pirq=8 ACPI_PIRQ_GEN PCI: 00:04.0: pin=1 pirq=1 Generated _PRT: Scope (\_SB.PCI0) { Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table { If (PICM) { Return (Package (0x09) { Package (0x04) { 0x0002FFFF, 0x00000000, 0x00000000, 0x00000010 }, Package (0x04) { 0x001BFFFF, 0x00000000, 0x00000000, 0x00000010 }, Package (0x04) { 0x001CFFFF, 0x00000000, 0x00000000, 0x00000011 }, Package (0x04) { 0x001CFFFF, 0x00000001, 0x00000000, 0x00000015 }, Package (0x04) { 0x001CFFFF, 0x00000002, 0x00000000, 0x00000013 }, Package (0x04) { 0x001DFFFF, 0x00000000, 0x00000000, 0x00000013 }, Package (0x04) { 0x001FFFFF, 0x00000000, 0x00000000, 0x00000011 }, Package (0x04) { 0x001FFFFF, 0x00000001, 0x00000000, 0x00000017 }, Package (0x04) { 0x0004FFFF, 0x00000000, 0x00000000, 0x00000010 } }) } Else { Return (Package (0x09) { Package (0x04) { 0x0002FFFF, 0x00000000, \_SB.PCI0.LPCB.LNKA, 0x00000000 }, Package (0x04) { 0x001BFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKA, 0x00000000 }, Package (0x04) { 0x001CFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKB, 0x00000000 }, Package (0x04) { 0x001CFFFF, 0x00000001, \_SB.PCI0.LPCB.LNKF, 0x00000000 }, Package (0x04) { 0x001CFFFF, 0x00000002, \_SB.PCI0.LPCB.LNKD, 0x00000000 }, Package (0x04) { 0x001DFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKD, 0x00000000 }, Package (0x04) { 0x001FFFFF, 0x00000000, \_SB.PCI0.LPCB.LNKB, 0x00000000 }, Package (0x04) { 0x001FFFFF, 0x00000001, \_SB.PCI0.LPCB.LNKH, 0x00000000 }, Package (0x04) { 0x0004FFFF, 0x00000000, \_SB.PCI0.LPCB.LNKA, 0x00000000 } }) } } } Change-Id: I832a86925283d61b64b8268246d9e6f11994c120 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-19mb/hp/xxx0p: set ACPI and SLPT bit in _WAK and _PTSIru Cai
ACPI bit is not set after an S3 resume, so set it in _WAK. Setting SLPT bit can make the power LED blink in S3. Change-Id: I2badc69510275df57938cb8607b3c4e0df50f028 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/22929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-12-05mb/hp/8460p: Add TPM supportBill XIE
After applying this change, /dev/tpm0 is visible inside GNU/Linux with kernel 4.9.51-1 from Debian, and there is a menu item shown inside SeaBIOS' (master only) interface if ESC is pressed. The TPM is confirmed working with [Heads](https://github.com/osresearch/heads). Change-Id: I3b845928954d203d1c3608b6704fedbd590e1fa9 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/22602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-10-31AMD boards: Fix function name (soft_reset) in messageJonathan Neuschäfer
Change-Id: Ia21a3e93712bd6b6780fe7308c6cf79c553f4e1b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-10-19AGESA: Split long lines in OemCustomize.cKyösti Mälkki
Change-Id: I907f55622e6aaba401471239f706ab24cd26319f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-17amd/agesa: Remove redundant UDELAY_LAPIC selectionPaul Menzel
This is already selected in `src/cpu/amd/agesa/Kconfig`. Change-Id: I691a2ade10ee461b6bc34ea24d57a911281791f3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-05AGESA: Re-enable HAVE_ACPI_RESUMEKyösti Mälkki
Note: For some of the boards affected ACPI S3 support was never tested but feature was just copy-paste from reference design. Change-Id: I2a54d605fa267a7501f57efd79a16b3bfa49891e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2017-09-29AGESA binaryPI: Drop amdlib.h in BiosCallouts.cKyösti Mälkki
Some fam14 boards will need more work on this area, those are to be addressed with followup patches. Change-Id: I14208cf8519a4cf71e4944d08a2dae36b7f1f878 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-26AGESA: Remove heap allocations from OemCustomize.cKyösti Mälkki
We can simply declare these structures const. Change-Id: I637c60cc2f83e682bd5e415b674f6e27c705ac91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-26AGESA binaryPI boards: Fix some whitespaceKyösti Mälkki
Change-Id: I150d4a71536137a725f43d900d483e7e35592bb3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-19AGESA binaryPI: Clean up amdfamXX.h includeKyösti Mälkki
Change-Id: Iba8b8d33e1f10e28745234988d97d4fafd04c798 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-09-13AGESA vendorcode: Move PlatformInstall.hKyösti Mälkki
All thse Option.*Install.h files are about configuring what eventually is referenced in the final libagesa build. It's self-contained so isolate these together with PlatformInstall.h to hide them from rest of the build. Change-Id: Id9d90a3366bafc1ad01434599d2ae1302887d88c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Clean up Ids.h and Filecode.h includesKyösti Mälkki
Change-Id: I9cb63ff58900a39d7cd8e3da2b9a9a95c2a41a69 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Drop heapManager.h includesKyösti Mälkki
Change-Id: I1a96b1c6181cd657d7aee82370ef86acd688cc94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA CIMX: Remove empty set_pcie_(de)resetKyösti Mälkki
For boards with cimx/sb800, mainboards defined only empty stubs. Reset functionality is handled as BiosCallout. For amd/inagua, the defined function was actually initial GPIO programming. For cimx/sb700, function had prototypes but no callers. For cimx/sb900, everything was commented out already. Change-Id: I936feb4fc41d903078620c919a733bb9f39c3efb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-12AGESA boards: Clean up some includesKyösti Mälkki
Change-Id: I84c70aa04ab556a3898d3525f7b9aab85812f61d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-02mb/hp: Enable ExpressCard hotplug in all ElitebooksIru Cai
The MPC.HPCE bit of the ExpressCard root port is not set in vendor firmware, so autoport didn't generate the right pcie_hotplug_map to support ExpressCard hotplug. Also add comments for each PCIe root port. Change-Id: Ic53e36a7192b9bfa8ff9fca57f4556e972e2611b Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/21310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-24AGESA mainboards: Clean up IS_ENABLED fan controlMarshall Dawson
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert all #if to if() for fan control setup. Change-Id: I04a9fbbf6f64f45e1a0b544267bfe840ce7fa1d9 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-08-24hp/abm: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Ie2f1eb5a101b9c392a7bd5cb2338dd6a6fdcfe52 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-24hp/pavilion_m6_1035dx: Switch away from AGESA_LEGACYKyösti Mälkki
Change-Id: Iffc176522e943c003e2625d8e15341b281a261eb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-08-23sb/amd/amd8111: Define ACPI sleep statesKyösti Mälkki
Note that against the specs, these definitions repeat the sleep type also in the reserved fields 3 and 4. For consistency, don't fix it here now. Entry for \_S3 is now masked off if HAVE_ACPI_RESUME=n. Change-Id: Icdc4c81d07fe7a99d5b0f8fa23e9443f58a40ab9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-23AGESA binaryPI: Consolidate and fix sleep statesKyösti Mälkki
SSFG was meant to be used as a mask to enable sleep states _S1 thru _S4. However as a logical instead of bitwise 'and' operation was used, all the states were enabled if only one was marked available. State _S3 is now set conditionally if HAVE_ACPI_RESUME=y. For pi/hudson this had been fixed already preprocessor. Note that all boards had SSFG == 0x0D that previously enabled ACPI S3 sleep state even when it was not available. States _S1 and _S2 still appear enabled in ASL/AML but may not actually work. TEST: 'cat /sys/power/state' and notice choice 'mem' was removed from the list of available sleep states. Change-Id: I27d616871c1771f0c87d8fba23d4ce1569607765 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-08-22AMD K8 fam10-15: Consolidate post_cache_as_ram callKyösti Mälkki
Change-Id: I5e7890aafbc8c80716ee49690e306482a482a863 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20573 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2017-08-18mainboard/hp: Add HP Elitebook 8460pIru Cai
The code is based on autoport. I'm using a machine with discrete GPU, and gfx.* in devicetree.cb is from 2760p. It can be debug with serial port on dock. Tested: - CPU and memory: i5-2540M, 4G+0 - Arch Linux (Linux 4.11.7, SeaBIOS payload, with ATOM BIOS extracted from vendor UEFI firmware) - USB ports - SD card reader - WLAN - DP display - S3 Change-Id: I9c42723ba240a2e9b46998c1a8a708aebc66c604 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2570pIru Cai
The code is based on autoport. The EHCI debug port is the upper USB port beside the battery. Tested and working: - CPU and memory: i7-3720QM, 4G+4G - Linux Mint with Linux 4.4 (SeaBIOS payload) - All USB ports - ExpressCard - WLAN - AC and battery status - S3 - Other devices detected: DVD drive, smartcard reader, fingerprint, bluetooth Not tested: - VGA and DP - Ethernet and modem - Dock Change-Id: I9f3cd124fc676d49add59e9f0a07f70a6bb0fff0 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 8470pIru Cai
The code is based on the code generated by autoport. The EHCI debug port is between the DP port and eSATA port. The serial port on dock can also be used for debugging. The model with discrete graphics is not tested. Tested and work: - memory: 0+4G, 4G+0, 4G+4G - Linux (Arch Linux with kernel 4.10.6) boot from SeaBIOS payload with native graphics init - WLAN - keyboard, trackpoint and touchpad - USB - serial port on dock - fan control - AC and battery status (EC) blobs: This laptop uses SMSC KBC1126 EC, and there are two blobs needed by it. You can use the tools in util/kbc1126/ to extract them and insert them to the coreboot image using the following configuration: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: Icbc051e2272b8ea73627940db15a56901d737472 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-08-18mainboard/hp: Add HP Elitebook 2760pIru Cai
The code is generated by autoport. The flash chip is socketed beside the WLAN slot. The EHCI debug port is on right side of the laptop beside the RJ11 connector. Things that work: - memory: 0+8G, 4G+8G - Linux (Linux Mint 18.1 with Linux 4.4) - native graphics init + SeaBIOS payload with SeaVGABIOS - all 3 USB ports - WLAN - WWAN - SD card reader - expresscard - S3 suspend and resume - internal flashing after IFD is unlocked and coreboot is flashed - keyboard, trackpoint and touchpad - fan control - AC and battery status Issues: - Wacom digitizer does not work (even after I add it in DSDT) - GRUB payload will freeze (in all Elitebooks, including chainloading GRUB from SeaBIOS) Things that are not tested: - smart card reader - cable modem (EC) blobs: This laptop uses SMSC KBC1126-NU as EC. It needs two blobs in the flash chip. You can use the tools in util/kbc1126 to extract them from OEM firmware, and use the following configuration to insert them to coreboot image: -> Chipset -> Add firmware images for KBC1126 firmware Change-Id: I3ffdb9f9c71f6c9a84e896abc3c424c8dd4bed0e Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/18241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-07-14K8: Fix indirect includesKyösti Mälkki
Change-Id: I370285aa52776170a32b6dd36c0eef74eea9400c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/20562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-07-06mainboard/[g-l]: add IS_ENABLED() around Kconfig symbol referencesMartin Roth
Change-Id: I1f906c8c465108017bc4d08534653233078ef32d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-06mb/*/*/cmos.layout: Make multibyte options byte alignedArthur Heymans
Changes the offsets of some options so that options that span multiple bytes are byte aligned. To make the cmos.layout file more consistent some things where moved around in the cmos.layout of thinkpads X200 and T400. Change-Id: Ic84a2a5dc6f9c102f041085871c2ed55e2f3692a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-04-28nb/amdk8: Link coherent_ht.cArthur Heymans
Change-Id: I1ef1323dc1f3005ed194ad82b75c87ef41864217 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19367 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-28nb/amd/amdk8: Link reset_test.cArthur Heymans
This needs some extra headers in amdk8/raminit.c that were otherwise provided by that file. Change-Id: I80450e5eb32eb502b3d777c56790db90491fc995 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19360 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-27nb/amd/amdk8: Link raminit_f.cArthur Heymans
For this debug.c needs to be linked too. Change-Id: I9cd1ffff2c39021693fe1d5d3f90ec5f70891f57 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19030 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-10nb/amdk8/(pre_)f.h: Don't declare global variable in headerArthur Heymans
This is needed if one wants to use the header more than once. Change-Id: I375d08465b6c64cd91e7563e3917764507d779ba Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19029 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-28AGESA: Introduce AGESA_LEGACY and its counterpartKyösti Mälkki
We define AGESA_LEGACY as an implementation of mainboard that has its romstage main completely under mainboard/ directory. We have learnt from other platforms this approach has several downsides when it comes to making platform-wide improvements. We start by creating per-family romstage.c file, which boards will gradually take into use by removing the AGESA_LEGACY Kconfig option we here apply to all of them. Change-Id: Id01931e185a023039a60af16a678de9966db8d65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18619 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07AGESA: Add agesa_helper.h headerKyösti Mälkki
These definitions do not require AGESA.h include, and we will eventually remove agesawrapper.h files. Change-Id: I1b5b78409828aaf2616e177bb54a054960c3869f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18588 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-07AGESA: Remove leftover s3resume includeKyösti Mälkki
Change-Id: I7a1574259f73a52b66d03c686ae8ab70345c36ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18586 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-03-07AGESA: Remove leftover agesawrapper includeKyösti Mälkki
Change-Id: Ib37989ee7535e59b1903537995f8383d8b04387c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18584 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-04amdfam10: Perform major include ".c" cleanupDamien Zammit
Previously, all romstages for this northbridge family would compile via 1 single C file with everything included into the romstage.c file (!) This patch separates the build into separate .o modules and links them accordingly. Currently compiles and links all fam10 roms without breaking other roms. Both DDR2 and DDR3 have been completed TESTED on REACTS: passes all boot tests for 2 boards ASUS KGPE-D16 ASUS KFSN4-DRE Some extra changes were required to make it compile otherwise there were unused functions in included "c" files. This is because I needed to exchange CIMX for the native southbridge routines. See in particular: advansus/a785e-i asus/m5a88-v avalue/eax-785e A followup patch may be required to fix the above boards. See FIXME, XXX tags Change-Id: Id0f9849578fd0f8b1eab83aed910902c27354426 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17625 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2016-12-26amd-based mainboards: Fix whitespace in _PTS commentsMarshall Dawson
Correct tabs that were intended as spaces. Change-Id: Idcf33d829f87a866b5ed880527102918d5b93842 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17905 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-22agesa and binaryPI mainboards: Fix devicetree hudson commentsMarshall Dawson
Make the ending comment associated with "chip ...hudson" match the appropriate directory name. Change-Id: I5e0d6d41a2e3f963760aad08ed6108acac5b66b3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/17904 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-12-06cpu/amd/mtrr.h: Drop excessive includesKyösti Mälkki
Change-Id: Id404bdab1f2361f1e7d20f7ee72111971863dddf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17736 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06AMD fam10h-15h: MMCONF_SUPPORT_DEFAULT is already setKyösti Mälkki
It gets selected from CPU_AMD_MODEL10XXX. Change-Id: Iffab43edc1152b07ba2af6273d4b5eb94afe33ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17692 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05mainboard & southbridge: Clear files that are just headersMartin Roth
These headers & comments indicating a lack of functionality don't help anything. We discourage copyrights and licenses on empty files, so just clear these. Change-Id: Id2ab060a2726cac6ab047d49a6e6b153f52ffe6d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17657 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-01AGESA: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Vendorcode always does PCI MMCONF access once it is enabled via MSR. In coreboot proper, we don't give opportunity to make pci_read/write calls before PCI MMCONF is enabled via MSR. This happens early in romstage amd_initmmio() for all cores. Change-Id: If31bc0a67b480bcc1d955632f413f5cdeec51a54 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-02Kconfig: Update default hex values to start with 0xMartin Roth
Kconfig hex values don't need to be in quotes, and should start with '0x'. If the default value isn't set this way, Kconfig will add the 0x to the start, and the entry can be added unnecessarily to the defconfig since it's "different" than what was set by the default. A check for this has been added to the Kconfig lint tool. Change-Id: I86f37340682771700011b6285e4b4af41b7e9968 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16834 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-09-26mainboard/*/*/mptable.c: Improve code formattingElyes HAOUAS
Change-Id: I341293cd334d6d465636db7e81400230d61bc693 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16723 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-09-20src/mainboard/getac - kontron: Add space around operatorsElyes HAOUAS
Change-Id: If3cdfdff60c92e3427f1b285e2bca92e2bb2a1cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-14src/mainboard: Capitalize ROM, RAM, CPU and APICElyes HAOUAS
Change-Id: Ia1f24d328a065a54975adde067df36c5751bff2d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15987 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-06-21intel/car/cache_as_ram.inc: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: I02881ce465cb3835a6fa7c06b718aa42d0d327ec Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-06-04AGESA boards: Split dispatcher to romstage and ramstageKyösti Mälkki
The way dispatcher table is set up prevents linker from optimizing unused code away, we currently have raminit in ramstage. Optimize this manually by configuring AGESA_ENTRY booleans for romstage and ramstage separately. This will remove references in FuncParamsInfo and DispatchTable -arrays. All boards now include multi-core dispatcher, it has minimal footprint: AGESA_ENTRY_LATE_RUN_AP_TASK ACPI S3 support depends on HAVE_ACPI_RESUME being enabled: AGESA_ENTRY_INIT_RESUME AGESA_ENTRY_INIT_LATE_RESTORE AGESA_ENTRY_INIT_S3SAVE Disabled for all boards as it was not used: AGESA_ENTRY_INIT_GENERAL_SERVICES Change-Id: I7ec36a5819a8e526cbeb87b04dce4227a1689285 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14417 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03AMD boards: Drop comment on include fileKyösti Mälkki
The included file does not declare pm_ioread(), and the modified file does not call it either. Change-Id: I9723caf1062db23b4a3648e07c2dc4c02f862619 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14968 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-03AGESA boards: Drop unused includeKyösti Mälkki
These files do not use definitions from OptionsIds.h. Also those definitions are required and already included for Ids.h. Change-Id: I149fcfe2ad72fe3d7390ee2043a86432aeae3f08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14980 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-10AGESA boards: Relocate platform memory configKyösti Mälkki
File buildOpts.c is a can of worms, pull platform memory configuration in to OemCustomize.c. This array should be assigned at runtime instead of linking a modified defaults table. Change-Id: I73d9d3fbc165e6c10472e105576d7c40820eaa6a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14528 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-05-10AGESA boards: Rename files containing OEM configurationKyösti Mälkki
There are other things besides PCIe port configuration that require board specific hooks. Change-Id: I0923651487b9ed5f6f7569ce08e02d993fa5f976 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14527 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Use temporary variable when storing register into itself.Vladimir Serbinenko
Otherwise it triggers a IASL warning with new IASL. Change-Id: I090ee18df78ea779137ee6797c55b96ea27e6d27 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13623 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-12-10ACPI: Fix IASL Warning about unused method for _S3 checkMartin Roth
According to the ACPI Spec for CondRefOf, the result argument is optional. In all of these locations, it was getting set but not used, creating a warning in new versions of IASL. Since it's an optional argument, just remove it. dsdt.aml 640: If (CondRefOf (\_S3, Local0)) Warning 3144 - Method Local is set but never used ^ (Local0) Change-Id: I758d198c33e585a6a4ad2c1c70f2370a01af5138 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12693 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-12-06hp/pavilion_m6_1035dx: Fix IASL warning - Missing _HID objectMartin Roth
- Add System board _HID object. - Remove Kconfig default disabling IASL warnings as errors Fixes warning: dsdt.aml 64: Device (MB) { Warning 3141 - ^ Missing dependency (Device object requires a _HID or _ADR in same scope) Change-Id: I4fa6ab2a6744d58ded8b0feb361e002d90e11474 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12532 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-24northbridge/amd/amdfam10: Rename mislabeled iommu nvram option to gartTimothy Pearson
Change-Id: Ia24102e164eb5753ade3f9b5ab21eba2fa60836b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12046 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-23IASL: Enable warnings as errorsMartin Roth
We've actually got more warnings now than when I first tested IASL warnings as errors. Because of this, I'm adding it with the option to have it disabled, in hopes that things won't get any worse as we work on fixing the IASL warnings that are currently in the codebase. - Enable IASL warnings as errors - Disable warnings as errors in mainboards that currently have warnings. - Print a really obnoxious message on those platforms when they build. ***** WARNING: IASL warnings as errors is disabled! ***** ***** Please fix the ASL for this platform. ***** Change-Id: If0da0ac709bd8c0e8e2dbd3a498fe6ecb5500a81 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10663 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-11-18cpu/amd/fam10h-fam15h: Update Fam15h APIC config and startup sequenceTimothy Pearson
This fixes Family 15h multiple package support; the previous code hung in CAR setup and romstage when more than one CPU package was installed for a variety of loosely related reasons. TEST: Booted ASUS KGPE-D16 with two Opteron 6328 processors and several different RDIMM configurations. Change-Id: I171197c90f72d3496a385465937b7666cbf7e308 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12020 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-12AMD/Kabini: Fix the interrupt routingZheng Bao
The plugged devices on PCIe should use IOAPIC2 instead of standard IOAPIC1. The entries in IOAPIC2 count from the end of IOAPIC1. The unchanged code worked because the OS uses MSI instead APIC. To test that, boot linux with parameter pci=nomsi and see if the devices like NIC work well as they do without the booting parameter. run 'cat /proc/interrupts' to see if the devices actually use no-msi. Change-Id: Id6d35224312aeb6e3a175ec9990e0bb34bad67e7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/12362 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-11-10mainboard/**/irq_tables.c: Remove reference to getpirPatrick Georgi
The obsolete and removed getpir utility remarked in its output that the data is autogenerated. The tool was removed because it wasn't very reliable, so there's no need to point that anymore. Change-Id: I5d624931ba7872b1fefa8fa3c270ae7367e069fa Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12354 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-11-05mainboard: Remove last_boot NVRAM optionTimothy Pearson
The last_boot NVRAM option was deprecated and removed in commit 3bfd7cc6. Remove the last_boot option from all affected mainboards to eliminate user confusion. Change-Id: I7e201b9cf21dfe5dda156785bad078524098626d Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12316 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-11-02cpu/amd: Add initial AMD Family 15h supportTimothy Pearson
TEST: Booted ASUS KGPE-D16 with single Opteron 6380 * Unbuffered DDR3 DIMMs tested and working * Suspend to RAM (S3) tested and working Change-Id: Idffd2ce36ce183fbfa087e5ba69a9148f084b45e Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11966 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-11-02cpu/amd: Move model_10xxx to family_10h-family_15hTimothy Pearson
Change-Id: I34501d3fc68b71db7781dad11d5b883868932a60 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/11965 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-30AMD mainboards: Fix 64bit BiosCallOuts.cStefan Reinauer
Change-Id: I0f3297dff47dfb44da034ac6f305dcf1981b9de1 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/11080 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-10-29mainboard: Convert #ifdef to IS_ENABLED in get_bus_conf.cTimothy Pearson
Change-Id: I254e9e9e65519edcf4d3f1ecc385af16d18c2367 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/12208 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-24coreboot: move TS_END_ROMSTAGE to one spotAaron Durbin
While the romstage code flow is not consistent across all mainboards/chipsets there is only one way of running ramstage from romstage -- run_ramstage(). Move the timestamp_add_now(TS_END_ROMSTAGE) to be within run_ramstage(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Built and booted glados. TS_END_ROMSTAGE still present in timestamp table. Change-Id: I4b584e274ce2107e83ca6425491fdc71a138e82c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11700 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-22coreboot: introduce commonlibAaron Durbin
Instead of reaching into src/include and re-writing code allow for cleaner code sharing within coreboot and its utilities. The additional thing needed at this point is for the utilities to provide a printk() declaration within a <console/console.h> file. That way code which uses printk() can than be mapped properly to verbosity of utility parameters. Change-Id: I9e46a279569733336bc0a018aed96bc924c07cdd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11592 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-08-26hp/dl165_g6_fam10/Kconfig: remove unused QRANK_DIMM_SUPPORTMartin Roth
AMD family 10 boards don't use QRANK_DIMM_SUPPORT. Change-Id: Id7e1fba86e2ea1d4d5f5c2e123bd36ad802fd15e Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: http://review.coreboot.org/11344 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-07-03hp/pavilion_m6_1035dx: Remove 'select USBDEBUG_IN_ROMSTAGE'Kimarie Hoot
Since USBDEBUG is not selected by this platform, there is no benefit to selecting USBDEBUG_IN_ROMSTAGE in the mainboard Kconfig. Further, using a 'select' for USBDEBUG_IN_ROMSTAGE prevents the value from being modified by a user in menuconfig. Change-Id: I67b71a724a8614882cff4bb43b042f0c092d11d2 Signed-off-by: Kimarie Hoot <kimarie.hoot@se-eng.com> Reviewed-on: http://review.coreboot.org/10671 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2015-06-08Remove empty lines at end of fileElyes HAOUAS
Used command line to remove empty lines at end of file: find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \; Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/10446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-06-05AMD K8 fam10: Refactor Kconfig SB_HT_CHAIN_ON_BUS0Kyösti Mälkki
If SB_HT_CHAIN_ON_BUS0 is selected, HyperTransport chain for System Bus is the first to scan and it will be assigned with bus number 0. If HT_CHAIN_DISTRIBUTE is selected, each link will reserve a fixed range of bus numbers instead of assigning consecutive numbers across all the links. All fam10 have SB_HT_CHAIN_ON_BUS0 selected under northbridge. Follow-up can easily drop this if we find this is dictated by architecture. Change-Id: I8deddcb4c3fd679b6b27e2879d9dba3895c4dd6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8366 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2015-05-24AGESA binaryPI boards: Drop annoying commentaryKyösti Mälkki
Same comments were already removed for the latest board, the amd/lamar. Change-Id: Ie244f838409c567c11f7444c9cf17de72e49dbb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10283 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-05-23AGESA fam15x fam16x: Remove HAVE_ACPI_RESUMEKyösti Mälkki
Implementation corrupts low-memory on S3 resume path, rendering OS unstable. AMD was never able to pinpoint a revision that did not have the issue. Change-Id: I9656ac1bfe1412775a6152b9f995c4d4ebf57159 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10285 Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: build bot (Jenkins)
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-05-10AGESA: Drop unused AGESA_MEM_TABLEKyösti Mälkki
These tables are not referenced anywhere, thus all comments about adjustments are void. Also drop stub AgesaReadSpd that is all commented out. Change-Id: I12233ea0dc4baaf36a75f359c52cc59c9b6dad79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/10143 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
2015-04-28Kconfig whitespace fixesMartin Roth
trivial whitespace fixes. Mostly changing leading spaces to tabs. Change-Id: I0bdfe2059b90725e64adfc0bdde785b4e406969d Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: http://review.coreboot.org/10000 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-27kbuild: automatically include southbridgesStefan Reinauer
This change switches all southbridge vendors and southbridges to be autoincluded by Makefile.inc, rather than having to be mentioned explicitly in southbridge/Makefile.inc or in southbridge/<vendor>/Makefile.inc. In order to be able to drop southbridge/amd/Makefile.inc, some scattered source files had to be moved to a southbridge/amd/common directory, in accordance to what we are doing on other architectures already. This means, vendor and southbridge directories are now "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree components to be built with a given coreboot version (given that the API did not change). Change-Id: I79bd644a0a3c4e8320c80f8cc7a7f8ffd65d32f2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/9796 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-23src/mainboard/*/*/board_info.txt: Added Release year for boardsMathias Friman
To simplify browsing the "Supported hardware" list, I added Release year for the hardware from asus, asrock, gigabyte, msi, via, tyan, intel, lenovo, apple, jetway and hp. Still several models and manufacturers to add information to. This is more of a proof-of-concept. The "Release year" will be shown in the wiki page. Change-Id: I6bc14ed06ac7c6b3c9f054b49f08cb9b3dc47947 Signed-off-by: Mathias Friman <mathias@workplays.se> Reviewed-on: http://review.coreboot.org/9963 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
This change switches all mainboard vendors and mainboards to be autoincluded by Kconfig, rather than having to be mentioned explicitly. This means, vendor and mainboard directories are becoming more "drop in", e.g. be placed in the coreboot directory hierarchy without having to modify any higher level coreboot files. The long term plan is to enable out of tree mainboards / components to be built with a given coreboot version (given that the API did not change) Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ib68ce1478a2e12562aeac6297128a21eb174d58a Reviewed-on: http://review.coreboot.org/9295 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-04-11hp/pavilion_m6_1035dx/cmos.layout: Remove unused optionsAlexandru Gagniuc
Some of the options in cmos.layout date back to the K8 days, and have not been used anywhere else, but K8. This makes nvramtool expose a very confusing set of options, most of which have no effect. Clean up the layout before it gets forked again. TEST: Booted linux, and checked 'nvramtool -a' output. Change-Id: I1c5f83790ec89ced4dcf954e4949f8554aef6087 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/8378 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
2015-04-01mainboards/amdfam10: Copy DIMM information to cbmem after romstageTimothy Pearson
src/northbridge/amd/amdfam10: Add amdmct_cbmem_store_info() function. Change-Id: I07376e276e3e9e3247d2576a09e58780d32a3a76 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/9138 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2015-03-21mainboards/amd/fam10: Add romstage timestampsTimothy Pearson
Example output: 1:start of rom stage 542 2:before ram initialization 193,989 (193,447) 3:after ram initialization 3,319,114 (3,125,124) 4:end of romstage 3,320,004 (889) Change-Id: Idcde7dc4c7a1d6c3118c82b67e8c2fcd4a07553b Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8776 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2015-03-19cpu/amd/model_10xxx: Add support for early cbmemTimothy Pearson
mainboards/amd/fam10: Initialize cbmem area after raminit When GFXUMA is enabled, CBMEM is placed at TOM - UMASIZE When GFXUMA is disabled, CBMEM is placed at TOM This matches the behaviour present before conversion to early CBMEM. The CBMEM location code implicitly assumes TOM does not change between romstage and ramstage. TOM is set by romstage raminit, and is never changed by romstage or ramstage afterward. As the CBMEM location is positioned at a specific offset from TOM that is known to both romstage and ramstage early CBMEM is safe on Fam10h systems. TEST: Booted ASUS KFSN4-DRE and verified both cbmem timestamp tables from romstage and cbmem log tables from ramstage. Change-Id: Idf9e0245fe91185696ff664b06182c26b376c196 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8489 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-03-16mainboards/amd: Fix incorrect reboot_bits locationTimothy Pearson
Change-Id: Iead07df714f4f1bbaae6b564431fb4edf7b18ac2 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: http://review.coreboot.org/8684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2015-03-09AMD fam10: Always have AMDMCTKyösti Mälkki
Also drop some more #if UNUSED_CODE. Change-Id: I1bbe96a65c9240636ff7cfaf70c2ecbfb3aee715 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/8551 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>