summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2013-11-25Fix VGA option rom INT15 handlerStefan Reinauer
The format of this function changed but was not updated in all mainboards. This fixes all Sandybridge/Ivybridge boards. The int15 handler no longer takes a regs structure as an argument and instead uses global variables. The yabel interface is now similar enough that we can drop the duplicate handler. Change-Id: Icdaae4d6d50884f6d7bce7a167d48cb1d4807010 Reviewed-on: https://gerrit.chromium.org/gerrit/48969 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/4135 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-25google/butterfly: Declare mrc_scrambler_seed_chk in cmos.layoutAlexandru Gagniuc
SandyBridge raminit uses this CMOS option. If it is not declared, the build fails when USE_OPTION_TABLE is selected. Change-Id: I1ba1f994d4ea3824dc66e8f35d0b5b24b88d4dd6 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/4269 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24haswell: enable monotonic timerAaron Durbin
For all the current haswell boards enable the monotonic timer. The ULT boards use the 24MHz MSR while the non-ULT boards use the local apic. Change-Id: I8b19f526a5a49e8467f296c566a2c4263bc5a863 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49763 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4148 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24smi: Update mainboard_smi_gpi() to have 32bit argumentDuncan Laurie
With the LynxPoint chipset there are more than 16 possible GPIOs that can trigger an SMI so we need a mainboard handler that can support this. There are only a handful of users of this function so just change them all to use the new prototype. Change-Id: I3d96da0397d6584f713fcf6003054b25c1c92939 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49530 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4145 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add panel power sequence timingsDuncan Laurie
These are placeholder values until we can configure for the exact panel. Change-Id: Ibe88cc3588947366eb1728e5b3e1ab8c8be6dfe8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56807 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4196 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Clean up for easier portingDuncan Laurie
Minor tweaks to variable names in the slippy mainboard that make it easier to base a new board from without as much renaming. Also properly set up the thermal variables for the thermal zone that is defined in ACPI instead of using the generic setup from WTM2. Change-Id: I752c1a50bfdc06b6ddad95bd1331c6870b9f9df2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56328 Reviewed-on: http://review.coreboot.org/4183 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Run EC init as part of mainboard init stepDuncan Laurie
This will log and clear EC events so they do not take effect when the SMI handler is enabled. Change-Id: I5ef563f7cedc8977410cc3f69e2655fc4e14c9eb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56055 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4178 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Update interrupt routingDuncan Laurie
The SerialIO devices have specific requirements for PCI interrupt mode to use PIRQ{E,F,G,H} that are not being met. D21:F0 uses PIRQE, which must not be shared with other PCH D21:F1-F6 share PIRQF, which must not be shared with other PCH D23:F0 uses PIRQH, which must not be shared with other PCH - Fix D20IR -> D20IP typo - Remove D25/EHCI2 as it does not exist - Reorder other interrupts to clear PIRQE/PIRQF/PIRQH Check device interrupts in the kernel 0: IO-APIC-edge timer 1: IO-APIC-edge i8042 8: IO-APIC-edge rtc0 9: IO-APIC-fasteoi acpi 16: IO-APIC-fasteoi ath9k 18: IO-APIC-fasteoi i801_smbus 19: IO-APIC-fasteoi ehci_hcd:usb1 21: IO-APIC-fasteoi i2c-designware-pci--1, i2c-designware-pci--1 40: PCI-MSI-edge PCIe PME 41: PCI-MSI-edge i915 42: PCI-MSI-edge ahci 43: PCI-MSI-edge xhci_hcd 44: PCI-MSI-edge snd_hda_intel Change-Id: Id4c08d11d2860f270c6387138acdc7d3d83a85b5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/56028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4176 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: set PWM valuesAaron Durbin
The dev screen was not displaying properly. With the PWM values programmed the screen displays correctly. Change-Id: I82b56a92e4168022082a2e519026977ee2ae0c9e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51472 Reviewed-on: http://review.coreboot.org/4172 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Put SerialIO devices in PCI modeDuncan Laurie
The device at function 0 also needs to be enabled or the kernel will ignore all other functions. 00:15.0 DMA controller: Intel Corporation Lynx Point-LP Low Power Sub-System DMA (rev 03) 00:15.1 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #0 (rev 03) 00:15.2 Serial bus controller [0c80]: Intel Corporation Lynx Point-LP I2C Controller #1 (rev 03) Change-Id: I0e1bc7bb719756496c46664d66dc1b1cf2f4d1ba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/51370 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4171 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add EC to the device treeDuncan Laurie
This lets the keyboard init get called properly. Change-Id: I11ffb459907188a58149d28a6ade0b7de7d15d08 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4167 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Update SPDDuncan Laurie
Change-Id: Iae0258ceb0424df0937d2cec7dd885060f5b4e48 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/50082 Reviewed-on: http://review.coreboot.org/4157 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add SPD data for on-board memoryDuncan Laurie
Change-Id: I7a617fe06d23b906f718ed30f1378f7d220b2799 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49911 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4154 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Prepare LPC IO decode ranges for ECDuncan Laurie
- 0x200-0x208 for host command window - 0x800-0x8ff for host command arguments and parameters - 0x900-0x9ff for exported EC memory map Change-Id: I064b969843ef0d3c602793d1cb3d82715775c05e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49755 Reviewed-on: http://review.coreboot.org/4151 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-11-24slippy: Add iSSD power sequencingDuncan Laurie
Without an LM10506-A the power sequencing for this part needs to be done manually using GPIOs. Change-Id: I842152e5f7c30c8dbe37df0c344935a659eb2887 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49648 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4150 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-11-24slippy: Initial mainboard commitDuncan Laurie
Change-Id: I33876b90902d4a08d760eb482b08ba41be6e3695 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/49531 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4147 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-10-14Revert "CBMEM: Always have early initialisation"Kyösti Mälkki
This reverts commit de1fe7f655c549e8dce5b34218221890fa5ccc34. While things appeared to work, there were actually invalid references to CAR storage after CAR was torn down on boards without EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be restricted to boards that handle CAR migration properly. Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3968 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always select CAR_MIGRATIONKyösti Mälkki
If romstage does not make cbmem_initialize() call, linker should optimize the code for CAR migration away. This simplifies design of CBMEM console by a considerable amount. As console buffer is now migrated within cbmem_initialize() call there is no longer need for cbmemc_reinit() call made at end of romstage. Change-Id: I8675ecaafb641fa02675e9ba3f374caa8e240f1d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3916 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21CBMEM: Always have early initialisationKyösti Mälkki
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig. If romstage does not make the cbmem_initialize() call, features like COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during romstage, but that data will get lost as no CAR migration is executed. Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3917 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps: Stash early timestamps in CAR_GLOBALKyösti Mälkki
Change-Id: I87b454c748cf885491d5b38bfe53a2ec0e9f38c5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3910 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21timestamps intel: Move timestamp scratchpad to chipsetKyösti Mälkki
This retrieves back the value stored with store_initial_timestamp() in the bootblock for southbridge. Change-Id: I377c823706c33ed65af023d20d2e4323edd31199 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3908 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-17Fix whitespace leaked into treeKyösti Mälkki
Clean whitespace errors that have gotten past lint-stable-003-whitespace and gerrit review. Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3920 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-11CBMEM: Drop parameter from cbmem_reinit()Kyösti Mälkki
Function is always called with get_top_of_ram() - HIGH_MEMORY_SIZE which equals cbmem_base, thus no need to pass it as a parameter. Change-Id: If026cb567ff534716cd9200cdffa08b21ac0c162 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3564 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM ARM: Prefer get_cbmem_table() over cbmem_late_set_table()Kyösti Mälkki
Implementing get_cbmem_table() allows initializing CBMEM earlier. Change-Id: I973f3a84dd9aaa2839959df5dda22909fdb9edeb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3560 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-11CBMEM: Add cbmem_late_set_table() and drop references to high_tables_baseKyösti Mälkki
This helper function is for compatibility only for chipsets that do not implement get_top_of_ram() to support early CBMEM. Also remove references to globals high_tables_base and _size under arch/ and from two ARMv7 boards. Change-Id: I17eee30635a0368b2ada06e0698425c5ef0ecc53 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3902 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-09intel/sandybridge intel/bd82x6x: remove explicit pcie config accessesKyösti Mälkki
Now that MMCONF_SUPPORT_DEFAULT is enabled by default remove the pcie explicit accesses. The default config accesses use MMIO. Change-Id: I58c4b021ac87a035ac2ec2b6b110b75e6d263ab4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3810 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-07-31Drop unused EXTERNAL_MRC_BLOBStefan Reinauer
The Kconfig variable EXTERNAL_MRC_BLOB is not used. Drop it. Change-Id: I3caa5c2b6bcf5d2c13b6987da8ab3987bad0e506 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3829 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-07-10pit: Redo the display port bridge initialization code.Gabe Black
The display port bridge on pit is different from the one on snow and needs to be initialized differently. Instead of waiting for the chip to come up on its own and assert the hotplug detect, we need to access it over i2c and get it up and running ourselves. Change-Id: I4bc911cb8e4463edff7beabd2f356cb70ae9f507 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3723 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Enable the ps8625 driver.Gabe Black
Change-Id: Id1277ceefc844a052627483e6c9d01bcb5da975f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3722 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Stop setting up the hardware dp hotplug detect in ROM stage too.Gabe Black
This was removed from ramstage a little while ago and should have been removed from here as well. Change-Id: I6a40ed4a98bedac39e5492e4b1aed3427ab4e08b Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3720 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10PIT: add panel to the list of things to be powered up by the PMICRonald G. Minnich
This appears to be needed, though we have no way to test yet. Change-Id: I39033581011e056258193f2cdff78814361a8d55 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3719 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/exynos: Prevent unexpected reboots in resume.Hung-Te Lin
In resume path, if memory setup takes too long without setting PS_HOLD, EC watch dog may power off or reboot the system. To prevent that, we should enable PS_HOLD in same timing as cold boot - right before starting memory setup. Change-Id: I5c294fa7ae015f8cff57b1fd81e5b80902647b15 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3718 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Replace the tps65090 functions and adjust the hotplug detect line.Gabe Black
The functions which manipulated the tps65090 were removed a while ago because it isn't accessible directly from the AP, it's on an I2C bus that has to be accessed by the EC on our behalf. Now that that capability has been added, we can rewrite the small portion of the the tps65090 we actually used but using the EC passthrough commands. Also, we should not be configuring the hardware display port hotplug detect line since we're using it as a GPIO for other purposes. The GPIO we're using instead defaults to being an input, but to be safe we should probably explicitly configure it as one anyway. Change-Id: I7f8a8a767e3cccb813513940a5feceea482982f5 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/pit: Correct EC device in mainboard configuration.Hung-Te Lin
The ChromeOS EC for peach_pit is connected to SPI2 bus, not I2C. Change-Id: Ifeb8a626aa4fc3d3a181a7bc016e3f91be948ae5 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3716 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10armv7/pit: Setup EC on SPI2.Hung-Te Lin
The Embedded Controller (EC) for Pit is connected via SPI2, and needs to be configured before we can talk to it. Change-Id: I1f8e921b4616f15951f3e5fae1ecbf116de4ba90 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3707 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: update I2C4 speed constantDavid Hendricks
Change-Id: I4feabc448945c4664d3114c0c8afdad48338230a Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3705 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Configure the pinmux for the i2c busses that are connected on pit.Gabe Black
Change-Id: I2dc4caa370473dd86fee2b5cc8b1b9eb154b970e Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3702 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5420: Initialize USB PHYStefan Reinauer
... this is needed for libpayload to talk to USB devices. (forward ported from https://gerrit.chromium.org/gerrit/#/c/55554) Change-Id: I5a20864689efd0c0149775e6d85b658e0cc6715c Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3697 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5250: Initialize USB PHYStefan Reinauer
... this is needed for libpayload to talk to USB devices. Change-Id: I7eb19003c9e96efb5fa7a3f97c7b15f3ef332687 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3696 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Replace the snow GPIO indexes with ones for pit.Gabe Black
The GPIOs used by vboot and setting up the display and backlight were still the ones for snow. This change updates them so they're correct for pit. Change-Id: I06ba773da3af249efec723bb90c2e9e8075a777a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3689 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Remove the MAX_CPUS option.Gabe Black
The MAX_CPUS option is only used on x86 currently, so there's no reason to have it in the pit config. Change-Id: I270bbfd3aff781d88304791b1d9735777643caab Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3688 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Stop compiling in the max77686 driver on pit.Gabe Black
That part isn't used on pit. Change-Id: I48f3a10f7e6eb89b1e9630d2372b6865b4c12a7f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3687 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Stop calling tps65090 functions until we can call through the EC.Gabe Black
On pit, the tps65090 is connected to the EC and has to be accessed by proxy. Until we have that implemented, this change removes calls to tps69050 which will never succeed, and stops compiling in the driver. Change-Id: I7218f85f9f26623bd13aaaf8ded0638b3b2f874a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3686 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: set up the PMIC correctlyDavid Hendricks
This updates the setup_power() function to actually set up the PMIC which is on this board (the MAX77802). Change-Id: I9c6f21f183dacc0bca71277e681e670834412d78 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3680 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10PIT: memory setupRonald G. Minnich
Tested and working. Gets us to ramstage. Change-Id: Ib9ea4a6c912e8152246aaf4f1f084a4aa1626053 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Implement support for the pinmux as functions.Gabe Black
Change-Id: I5e0ec360597cd95cb6510fb32b04d8931e6a33db Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3674 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: De-switch-ify the pinmux configuration code.Gabe Black
The pinmux code for the exynos5250 was all bundled into a single, large function which contained a switch statement that would set up the pins for different peripherals within the SOC. There was also a "flags" parameter, the meaning of which, if any, depended on which peripheral was being set up. There are several problems with that approach. First, the code is inefficient in both time and space. The caller knows which peripheral it wants to set up, but that information is encoded in a constant which has to be unpacked within the function before any action can be taken. If there were a function per peripheral, that information would be implicit. Also, the compiler and linker are forced to include the entire function with all its cases even if most of them are never called. If each peripheral was a function, the unused ones could be garbage collected. Second, it would be possible to try to set up a peripheral which that function doesn't know about, so there has to be additional error checking/handling. If each peripheral had a function, the fact that there was a function to call at all would imply that the call would be understood. Third, the flags parameter is fairly opaque, usually doesn't do anything, and sometimes has to have multiple values embedded in it. By having separate functions, you can have only the parameters you actually want, give them names that make sense, and pass in values directly. Fourth, having one giant function pretends to be a generic, portable API, but in reality, the only way it's useful is to call it with constants which are specific to a particular implementation of that API. It's highly unlikely that a bit of code will need to set up a peripheral but have no idea what that peripheral actually is. Call sights for the prior pinmux API have been updated. Also, pinmux initialization within the i2c driver was moved to be in the board setup code where it really probably belongs. The function block that implements the I2C controller may be shared between multiple SOCs (and in fact is), and those SOCs may have different pinmuxes (which they do). Other places this same sort of change can be made are the pinmux code for the 5420, and the clock configuration code for both the 5250 and the 5420. Change-Id: Ie9133a895e0dd861cb06a6d5f995b8770b6dc8cf Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3673 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10google/pit: Don't spew output with GPIO configStefan Reinauer
There are hundreds of GPIOs on the Exynos5420. Don't always print all of them per default. Change-Id: I2152ab760e31a335dbcd9d6ad32cd1eaae4b89bc Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3670 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Simplify the graphics code by eliminating the unused color mapStefan Reinauer
The code that allocated space for the framebuffer was adding space for a vestigial color map which was never used. It was also passing around a structure which was used to calculate a single value which was already known when that structure was put together. Eliminate the extra space, and pass the single value instead of the structure. Change-Id: I29bc17488539dbe695908e47f0b80c07e102e17d Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-on: http://review.coreboot.org/3666 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10google/snow: Don't spew output with GPIO configStefan Reinauer
There are hundreds of GPIOs on the Exynos5250. Don't always print all of them per default. Change-Id: Ie349f2a4117883302b743027ed13cc9705b804f8 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3661 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10chrome ec: Update EC header from EC repositoryDuncan Laurie
- Updated ec_commands.h is copied in directly from EC repo - Removed "old" interface and update resources for "new" interface - Updated temp sensor constants and added "not calibrated" - Update mainboards to remove check for EC_SWITCH_KEYBOARD_RECOVERY Change-Id: Ic93c1914f86b6f5bc224178270624ed92b5c1e15 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5420: Replace the 5250 clock logic with 5420.Gabe Black
The new code is stolen from U-Boot with little or no understanding of how it works. Change-Id: I3de7d25174072f6068d9d4fdaa308c0462296737 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3658 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Exynos5420: Clean up console codeStefan Reinauer
- Don't initialize console twice in the bootblock - remove printk in memory init that would mess up the UART - unconditionally run console_init() in romstage, as it is also unconditionally run in the bootblock. Change-Id: I983d011c6ca602445f447d17799c1b2a33e8bd1d Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3656 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec: Remove hardcoded GPI offset in EC SCIDuncan Laurie
With LynxPoint-LP the SCI GPE is no longer a GPIO that is offset by 16. Remove the Add and fix up the link definition so it is still accurate. Change-Id: I091141183a09345b5ffe28365583e48019f9f5e5 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10exynos5250: Simplify the graphics code by eliminating the unused color map.Gabe Black
The code that allocated space for the framebuffer was adding space for a vestigial color map which was never used. It was also passing around a structure which was used to calculate a single value which was already known when that structure was put together. Eliminate the extra space, and pass the single value instead of the structure. Change-Id: Ia6a41cefdf8b29fe7d68f9596a156eced6eb5df8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3652 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10snow: Make coreboot set up pins for busses it knows are hooked up as suchGabe Black
Coreboot knows that, for the snow board, certain pins are to be connected to bus controllers in the SOC and to the wires of a bus external to the SOC. It can configure them as such and free its payload from having to know how to set everything up. Change-Id: I1bb127c810e9ee077afc4227a6f316eaa53d6498 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3650 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-07-10ARMv7: Clean up console codeStefan Reinauer
- Guard console_init() with CONFIG_EARLY_CONSOLE in bootblock - Don't initialize console twice in the bootblock - remove printk in memory init that would mess up the UART - unconditionally run console_init() in romstage, as it is also unconditionally run in the bootblock. Change-Id: I8f0d60877433162367074d0e55e01f935fd81f8e Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3647 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Add a "pit" mainboard which is mostly a copy of "snow".Gabe Black
This change adds a pit mainboard which is mostly a copy of snow, except that mentions of the 5250 were replaced with the 5420, and mentions of snow were replaced with pit. Change-Id: I8eb0ce379eb2fa353bb88d5656a0c5e2290afbf0 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10pit: Create an exynos5420 directory which is nearly a copy of exynos5250.Gabe Black
This change creates an exynos5420 directory with code that will eventually implement support for the exynos5420 cpu from Samsung. Currently it's a copy of the exynos5250 directory with the name changed. There are going to be some problems where headers in src/cpu/samsung/exynos-common include headers in the exynos5250 directory directly. Change-Id: Ia8d7244310d32499238bbc171c0c668ec48178e1 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3644 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: De-uboot-ify Exynos5250 GPIO codeStefan Reinauer
The Exynos GPIO code has three different APIs that, unfortunately, were widely used throughout the code base. This patch is cleaning up the mess. Change-Id: I09ccc7819fb892dbace9693c786dacc62f3f8eac Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3643 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: De-uboot-ify Exynos5250 codeStefan Reinauer
When starting the Exynos5250 port, a lot of unneeded u-boot code was imported. This is an attempt to get rid of a lot of unneeded code before the port is used as a basis for further ARM ports. There is a lot more that can be done, including cleaning up the 5250's Kconfig file. Change-Id: I2d88676c436eea4b21bcb62f40018af9fabb3016 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3642 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10samsung/exynos5250: unify codeStefan Reinauer
It turns out that the exynos5-common code previously imported from u-boot is not common code at all but very specific to the 5250 and not compatible with the 5450. Hence, unify the directories exynos5250 and exynos5-common. We will try to factor out common code while progressing with the 5450 port. Change-Id: Iab595e66fcd01eda8365c96fb8bef896f7602f03 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3641 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Wield battle axe at ARM portStefan Reinauer
This patch unfortunately incorporates a number of changes, all of which are making future ARM ports easier. - drop cruft that came in with u-boot - move serial console from mainboard Kconfig to Exynos Kconfig - factor out non-board specific wakeup code - move generic bootblock code from mainboard to Exynos - actually call arch_cpu_init() - remove dead code - fix up copyright messages - remove snow_ prefix from a lot of code to reduce the noise when creating a new mainboard based on that code. Change-Id: Ic05326edf5a7e1a691c5ff841a604cb9e351b562 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3640 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Rename hardwaremain() to main()Stefan Reinauer
... and drop the wrapper on ARMv7 Change-Id: If3ffe953cee9e61d4dcbb38f4e5e2ca74b628ccc Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3639 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ARMv7: normalize ramstage code flowStefan Reinauer
In ram stage, all code flow should be tied to the resource allocator. Stuff that has to happen before everything else goes into the mainboard enable function in mainboard.c. This patch empties the main() wrapper around hardwaremain.c, allowing to get rid of this special case in the ARM port. Change-Id: Ide91a23f1043b64acf64471f180a2297f0f40d97 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3638 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Provide support for setting up the framebuffer from EDIDRonald G. Minnich
Add three functions to edid.c: void set_vbe_mode_info_valid(struct edid *edid, uintptr_t fb_addr) takes an edid and uintptr_t, and fills in a static lb_framebuffer struct as well as setting the static vbe_valid to 1 unless some problem is found in the edid. The intent here is that this could be called from the native graphics setup code on both ARM and x86. int vbe_mode_info_valid(void) returns value of the static vbe_valid. void fill_lb_framebuffer(struct lb_framebuffer *framebuffer) copies the static edid_fb to lb_framebuffer. There is now a common vbe.h in src/include, removed the two special ones. In general, graphics in coreboot is a mess, but graphics is always a mess. We don't have a clean way to try two different ways to turn on a device and use the one that works. One battle at a time. Overall, things are much better. The best part: this code would also work for ARM, which also uses EDID. Change-Id: Id23eb61498b331d44ab064b8fb4cb10f07cff7f3 Signed-off-by: Ronald G. Minnich <rminnich@google.com> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3636 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10Drop some duplicates of PCI-e config functionsKyösti Mälkki
These are not specific to Intel. Further work needs to be done to combine these with MMCONF_SUPPORT in arch/io.h. Change-Id: Id429db2df8d47433117c21133d80fc985b3e11e4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3502 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-04intel/sandybridge intel/ivybridge: Use MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Change all PCI configuration accesses to MMIO on all boards with SandyBridge and IvyBridge. To enable MMIO style access, add explicit PCI IO config write in the bootblock. Change-Id: I8f957a80bf57df000897c5a080dd5ff131b1ec0d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3576 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-07-03Move select MMCONF_SUPPORT under northbridgeKyösti Mälkki
Move/remove MMCONF_SUPPORT reference under mainboard Kconfig, as that feature originates from northbridge and cannot be disabled for a single mainboard. Change-Id: I6d6861079876ddddaff90b10f18edb6936e93bd0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3589 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-26snow: Add a name to the serial console UART choice block.Gabe Black
This allows other boards to have the same choice block without confusing kconfig. Change-Id: Iea5a7f2d1c263aa7992f504b832ca9c862833c3f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3293 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-08hardwaremain: drop boot_complete parameterStefan Reinauer
it has been unused since 9 years or so, hence drop it. Change-Id: I0706feb7b3f2ada8ecb92176a94f6a8df53eaaa1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3212 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-05-06exynos5250/snow: deprecate time.hDavid Hendricks
This re-introduces 2fde966 (http://review.coreboot.org/#/c/3177/) which was reverted due to unsatisfied dependencies. time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Change-Id: I8e60105629d9da68ed622e89209b3ef6c8e2445b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3201 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-04Revert "exynos5250/snow: deprecate time.h"David Hendricks
This reverts commit 2fde9668b47e74d1bfad2f1688a4481e6b966d04 Somehow this got merged before its dependencies. 3190 must be merged first, followed by 3176. However 3190 will fail while this patch is in. So the situation can't correct itself. Reverting this until the other two go in. Change-Id: I176f37c12711849c96f1889eacad38c00a8142c4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3195 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-05-03exynos5250/snow: deprecate time.hDavid Hendricks
time.h We Hardly Knew Ye. This deprecates time.h which is currently only used by Exynos5250 and Snow. The original idea was to try and unify some of the various timer interfaces and has been supplanted by the monotonic timer API. timer_us() is now obsolete. timer_start() is now mct_start() and is exposed in exynos5250/clk.h. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I14ebf75649d101491252c9aafea12f73ccf446b5 Reviewed-on: http://review.coreboot.org/3177 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01Google/Snow: Revise bootblock initialization.Hung-Te Lin
It's fine to always start timer even in suspend/resume mode, so we can move the timer_start() back to the very beginning of boot procedure. That provides more precise boot time information. With that timer change, the wake up state test procedure can be simplified. Verified by building and booting firmware image on Google/Snow successfully, and then suspend-resume without problem (suspend_stress_test). Change-Id: I0d739650dbff4eb3a75acbbf1e4356f2569b487d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3151 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01Google/Snow: Remove duplicated SPI1 initialization in bootblock.Hung-Te Lin
The firmware media source (SPI1) is already initialized by Exynos iROM. There is no need to do it again. Verified by building and booting Google/Snow successfully. Change-Id: I89390506aa825397c0d7e52ad7503f1cb808f7db Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Google/Snow: Remove unnecessary serial console init code.Hung-Te Lin
The "console_init" does initialize UART driver (which will setup peripheral and pinmux) and print starting message. Duplicated initialization can be removed. Also, console_init (from console.c) is always linked to bootblock (and will do nothing if CONFIG_EARLY_CONSOLE is not defined) so it's safe to remove #ifdef. Verified by building and booting on Google/Snow, with and without CONFIG_EARLY_CONSOLE. Change-Id: I0c6b4d4eb1a4e81af0f65bcb032978dfb945c63d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3150 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-30Google/Snow: Temporary fix for resume failure.Hung-Te Lin
The DDR3 memory initialization (with "mem_reset" set on normal boot) will cause resume to be unstable, especially when X is running. System may show X screen for few seconds, then crash randomly and unable to recover - although text console may still work for a while. Probably caused by corrupted memory pages. 'mem_reset' (which refers to RESET# in DDR3 spec) should be enabled according to DDR3 spec. But it seems that on Exynos 5, memory can be initialized without setting mem_reset for both normal boot and resume - at least no known failure cases are found yet. So this can be a temporary workaround. Verified by booting a Google/Snow device with X Window and ChromeOS, entering browser session with fancy web pages, closing LID to suspend for 5 seconds, then re-opening to resume. Suspend/resume worked as expected. Also tried the "suspend_stress_test" with X running and finished 100 iterations of suspend/resume test without failure. Change-Id: I7185b362ce8b545fe77b35a552245736c89d465e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3148 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-29Google/Snow: Enable suspend/resume.Hung-Te Lin
Add the suspend/resume feature into bootblock and romstage. Note, resuming with X and touchpad driver may be still unstable. Verified by building and booting successfully on Google/Snow, and then executing the "suspend_stress_test" in text mode ("stop ui; suspend_stress_test") in Chromium OS, passed at least 20 iterations. Change-Id: I65681c42eeef2736e55bb906595f42a5b1dfdf11 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3102 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-26google/snow: Revise romstage initialization code.Hung-Te Lin
Move board setup procedure to snow_setup_* functions, and Snow board-specific (wakeup) code to snow_* for better function names and comments. Verified by successfully building and booting on Google/Snow. Change-Id: I2942d75064135093eeb1c1da188a005fd255111d Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3130 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-25google/snow: Add "wakeup" module for suspend/resume.Hung-Te Lin
The "wakeup" procedure will be shared by bootblock and romstage for different types of resume processes. Note, this commit does not include changes in romstage/bootblock to enable suspend/resume feature. Simply adding functions to handle suspend/resume. Verified by successfully building and booting Google/Snow firmware image. Change-Id: I17a256afb99f2f8b5e0eac3393cdf6959b239341 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3129 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-25arm/exynos: Allow DRAM controller to be initialized without clearing RAM ↵Hung-Te Lin
content. To support suspend/resume, PHY control must be reset only on normal boot path. So add a new param "mem_reset" to specify that. Verified to boot successfully on Google/Snow. Change-Id: Id49bc6c6239cf71a67ba091092dd3ebf18e83e33 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3128 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-23GOOGLE/SNOW: get graphics workingRonald G. Minnich
This adds support for display bring-up on Snow. It includes framebuffer initialization and LCD enable functions. Change-Id: I16e711c97e9d02c916824f621e2313297448732b Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3116 Tested-by: build bot (Jenkins)
2013-04-19google/snow: disable unused USB3.0 PLL to save powerDavid Hendricks
This PLL is unused and can be disabled to save about 250mW. Change-Id: I1be37304d6ea5ff78696e05ad1023ce3c57f636c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3109 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19google/snow: Minor clean-ups for display setup code in ramstageDavid Hendricks
This just cleans up a few areas: - Removed an unnecessary delay from exynos_dp_bridge_setup() - The delay at the end of exynos_dp_bridge_init() is necessary, so removed the comment suggesting that it might not be. - Simplified exynos_dp_hotplug Change-Id: I44150f5ef3958e333985440c1022b4f1544a93aa Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3113 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19google/snow: enable clock gating to save powerDavid Hendricks
This enables clock gating to save power on unused IPs. Change-Id: I9ab2a2535ebb91bb4110390a6f055a67146bdbf9 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3110 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-19[3/3] google/snow: enable TMUDavid Hendricks
This enables the thermal management unit (TMU) on Snow. Change-Id: Idd76af40bf0a5408baf61ef2665fd52ae4e260ba Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3108 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-17google/snow: enable 32KHz sleep clockDavid Hendricks
Change-Id: I9db91826e4534b8a6eea2b13bcf7c6abd848b4e4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3075 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-16snow: Return 0 from get_recovery_mode_from_vbnv.Gabe Black
This function isn't yet used for much, or perhaps anything, but where it appears in the code it's ored with other values. Since we're not actually retrieving anything, it might be best to return 0 so that the other values that are being ored in can be expressed and this function can stay dormant until it actually has something to do. Change-Id: I6edc222a5c2d00ece2ecfad5191a615331eeaf16 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3098 Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2013-04-16snow: Report the state of the power button GPIO in the coreboot tables.Gabe Black
Change-Id: Ia7ce2b7342e186c565b92211e3ac15d80ce24b38 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3097 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Configure the power button as an input GPIO.Gabe Black
We need to read it to report its value to the payload. The kernel will reconfigure it as an external interrupt, but we'll make it a regular input for now. Change-Id: I019bd2c2731144d3b7bb53fad0c2c903874f616c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3096 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-16snow: Fix the name of some constants in romstage.c.Gabe Black
These names were inherited from chromeos.c where they've already been fixed. Change-Id: I7ad57b979b7b8f42f6bd68d1ecf887caba3fa3f1 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3095 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Get rid of the oprom loaded GPIO.Gabe Black
ARM doesn't use option ROMs, so this value doesn't make sense. Change-Id: I1a0f0854e1dd4b9594ca0c147e590337520436da Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3094 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Tidy up chromeos.c.Gabe Black
Got rid of a lot of #defines, some of which were converted to enums and the rest which were eliminated entirely. Got rid of cruft in get_developer_mode_switch and started using it for the dev mode GPIO. Instead of a macro defining how many GPIOs are expected, now the code actually counts the GPIOs as they're added. Change-Id: I97b6b9f52a72d1276eb3cf36d7f9dd7b335b4d19 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3093 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Add support for EC based recovery.Gabe Black
Implement the get_recovery_mode_switch function using the newly added I2C based Chrome EC support. Change-Id: I9d0200629887f202edf017cba3222a7d7f5b053e Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3092 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16snow: Fix some comments in chromeos.c.Gabe Black
The comment about the lid switch was left over from when this file was copied from another board and was incorrect. Also fixed a capitalization inconsistency. Change-Id: Icefd19047971e13c08f615578e4a181e82a2997f Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3091 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-16ec/google: Support Google's Chrome EC on I2C interface.Hung-Te Lin
Google's Chrome EC can be installed on LPC or I2C bus, using different command protocol. This commit adds I2C support for devices like Google/Snow. Note: I2C interface cannot be automatically probed so the bus and chip number must be explicitly set. Verified by booting Google/Snow, with following console output: Google Chrome EC: Hello got back 11223344 status (0) Google Chrome EC: version: ro: snow_v1.3.108-30f8374 rw: snow_v1.3.128-e35f60e running image: 1 Change-Id: I8023eb96cf477755d277fd7991bdb7d9392f10f7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3074 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-15Drop add_mainboard_resources and HAVE_MAINBOARD_RESOURCES againKyösti Mälkki
These are not defined since commit »Drop HAVE_MAINBOARD_RESOURCES« (1c5071d1) [1] but were unfortunately introduced again in new ports. [1] http://review.coreboot.org/1414 Change-Id: I5eb61628141aefd08779615702d51ca155fa632a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2707 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-04-14link/graphics: Remove the inclusion of an AMD header.Denis 'GNUtoo' Carikli
link(google chromebook pixel) is an intel machine. Change-Id: I9d40f1e945021d8e190879477cd12be7d0262733 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3085 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-13exynos5/snow: remove wait_ms arg from dp_controller_init()David Hendricks
This removes the wait_ms argument from the dp_controller_init(). The only delay involved is a constant 60ms delay that happens if everything else goes well. This delay is derived from the LCD spec so there's no reason it should be baked into the controller code. (This patch also has the side-effect of fixing a bug where we were delaying on an undefined value for wait_ms). Change-Id: I03aa19f2ac2f720524fcb7c795e10cc57f0a226e Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3078 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 09:17:57 +0000