summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2018-03-28mb/google/poppy/variants/nami: Add SPD file for sona.Van Chen
2018-03-27mainboard/google/poppy: Add SPD for Hynix H9CCNNNCLGALAR-NUDDuncan Laurie
2018-03-27mb/google/octopus: Remove emmc tuning parameters from devicetreeFurquan Shaikh
2018-03-26mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF methodSeunghwan Kim
2018-03-26mainboard/google/cheza: Add support for ChezaT Michael Turney
2018-03-26mb/octopus: Set PNP config to PNP_PERF_POWERShaunak Saha
2018-03-24mb/google/octopus: Select TPM options only if mocktpm is not selectedFurquan Shaikh
2018-03-23mb/google/zoombini: always report EC is in RO modeNick Vaccaro
2018-03-22mb/google/zoombini: Enable NVMeNick Vaccaro
2018-03-22mb/google/octopus: Add CLKREQ and de-emphasis settings for PCIe Wi-FIShamile Khan
2018-03-21mb/google/fizz: Enable I2C bus 2Zhongze Hu
2018-03-21mb/google/octopus: Re-size flash WP_RO segmentSrinidhi N Kaushik
2018-03-21mb/google/octopus: Create bip variantJustin TerAvest
2018-03-21mainboard/google/kahlee: Update GPIOs based on board IDMartin Roth
2018-03-21mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_tZhuohao Lee
2018-03-21mb/google/octopus: Enable TPM on GSPIRavi Sarawadi
2018-03-21mb/google/poppy/variant/nautilus: Enable CABC feature as defaultSeunghwan Kim
2018-03-21mb/google/kahlee: Add register address mapping for FCH MISCAkshu Agrawal
2018-03-20mainboard/google/kahlee: Initialize EC earlier in the bootblockMartin Roth
2018-03-19mb/google/octopus: Configure PERST_0 pinJustin TerAvest
2018-03-19mb/google/octopus: Fix GPIO config for DRAM_IDsJustin TerAvest
2018-03-19mb/google/poppy: Config GPIO for DMIC by different sku idamanda_hwang
2018-03-19mb/google/octopus: Configure PCH_WP_OD early.Justin TerAvest
2018-03-19mb/google/fizz: Enable VMXShelley Chen
2018-03-19soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uartRichard Spiegel
2018-03-17mb/google/octopus: Do not configure GPIO_149 as GPOFurquan Shaikh
2018-03-16soc/intel/apollolake and mainboards: Use pcie_rp_clkreq_pin arrayFurquan Shaikh
2018-03-16mb/google/eve: Update DPTF parametersDuncan Laurie
2018-03-15mb/google/poppy/variants/nami: Add gpio-keys ACPI node for PENHShelley Chen
2018-03-15mb/google/poppy/variants/nami: Use GPP_B4 as Touchscreen Power EnableShelley Chen
2018-03-15mb/google/octopus: Enable audio components.Shamile Khan
2018-03-14mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENHNicolas Boichat
2018-03-14mb/google/zoombini/variants/meowth: Make FPMCU interrupt level-triggeredVincent Palatin
2018-03-14mainboard/google/meowth: Enable System Agent dynamic frequencyLijian Zhao
2018-03-13mb/google/octopus: Add yorp variantJustin TerAvest
2018-03-13mb/google/poppy/variants/nautilus: Enable SAR configsFurquan Shaikh
2018-03-13mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4Furquan Shaikh
2018-03-12mb/google/octopus: Fix lpddr4 skusJustin TerAvest
2018-03-12mb/google/zoombini/variants/meowth: change gpios to no-connectsNick Vaccaro
2018-03-12mb/google/poppy: Clear memory_params before initializing themNicolas Boichat
2018-03-10meowth: Add SAR Sensor in devicetreeGwendal Grignou
2018-03-09mb/google/zoombini: re-enable software syncCaveh Jalali
2018-03-09mb/google/poppy/variants/nami: Fix typo in nami MakefileFurquan Shaikh
2018-03-09mainboard/google/kahlee: Set GPIO 40 to inputMartin Roth
2018-03-09mainboard/google/kahlee: Disable Bayhub part on board_id 0Martin Roth
2018-03-08mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDsShelley Chen
2018-03-08mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1Daniel Kurtz
2018-03-08mb/google/poppy : Get SKU_ID from EC for Nami/Vayneamanda_hwang
2018-03-08google/scarlet: Adjust K&D power sequence from softwareBrian Norris
2018-03-08mb/google/octopus: Add gpio configs for communitiesShaunak Saha
2018-03-08mb/google/octopus: Add device tree settingsShamile Khan
2018-03-08mb/google/nautilus: Correct LINK FREQ of imx258 sensorAlan Chiang
2018-03-08mb/google/kahlee: Add SKU supportSimon Glass
2018-03-08mb/google/poppy/variants/nami: Add WACOM EMR supportjasper lee
2018-03-07mb/google/poppy/variants/nami: Add SPD files for namijasper lee
2018-03-07mb/google/zoombini/variants/meowth: enable SAR powerNick Vaccaro
2018-03-07mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wakeSeunghwan Kim
2018-03-07mb/google/poppy/variants/nami: Add memory detection logicShelley Chen
2018-03-07mb/google/poppy/variants/nami: Add spd filesShelley Chen
2018-03-06google/snappy: enhance CCD type-A USB 2.0 phy strengthKevin Chiu
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
2018-03-06mb/google/fizz: Skip FSP init for UART 0Duncan Laurie
2018-03-06Revert "mainboard/google/meowth: enable PCH iSCLK"Lijian Zhao
2018-03-05mb/google/poppy: Allow use of optional secondary SPDFurquan Shaikh
2018-03-05mb/google/poppy/variants: Set pch_trip_temp to 75CFurquan Shaikh
2018-03-02sb/intel/common: Fix conflicting OIC register definitionNico Huber
2018-03-02mb/google/zoombini/variants/meowth: Enable NVMeBora Guvendik
2018-03-02mainboard/google/zoombini/variant/meowth: enable speed shiftNick Vaccaro
2018-03-01mb/google/reef/sand: Override USB2 phy settingsKatherine Hsieh
2018-03-01mainboard/google/meowth: Turn on DBC over USB3.0Lijian Zhao
2018-03-01mb/google/poppy/variant/nautilus: Change SlowSlewRateForSa settingSeunghwan Kim
2018-03-01mb/google/reef: Override USB2 phy settingsTim Chen
2018-03-01mb/google/coral: add usb2 phy setting override for some variantsSheng-Liang Pan
2018-03-01mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlierJustin TerAvest
2018-02-28mainboard/google/zoombini: consolidate SPD makefilesNick Vaccaro
2018-02-28mb/google/poppy/variants/nami: Enable elan touchscreenCrystal Lin
2018-02-28mb/google/octopus: Add LPDDR4 memory initRavi Sarawadi
2018-02-27sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common locationArthur Heymans
2018-02-26mainboard/google/zoombini: enable 4 coresNick Vaccaro
2018-02-23mb/google/fizz: Enable PCIe port 11, 12Zhongze Hu
2018-02-22mb/google/kahlee/mainboard.c: Fix mainboard_picr_dataRichard Spiegel
2018-02-22mb/google/kahlee: Use GPIO macros for baseboardJustin TerAvest
2018-02-22mb/google/kahlee: Correct bad gpio entryJustin TerAvest
2018-02-22mainboard/google/meowth: enable PCH iSCLKLijian Zhao
2018-02-22mainboard/google: Disable big, pit, and ryu ec buildsMartin Roth
2018-02-22mainboard/google/zoombini: Add config for meowth audioSathyanarayana Nujella
2018-02-21mainboard/google/kahlee: Add tis_plat_irq_statusChris Ching
2018-02-20mb/google/poopy/variants/nami: Add Pmax settingGaggery Tsai
2018-02-20mb/google/kahlee/OemCustomize.c: Disable bank interleaveRichard Spiegel
2018-02-17mb/google/fizz: Wait until display is readyDaisuke Nojiri
2018-02-17soc/amd/stoneyridge: Normalize GPIO initJustin TerAvest
2018-02-16mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45WNaresh G Solanki
2018-02-16mb/google/zoombini/variants/meowth: enable FPMCU interruptVincent Palatin
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
2018-02-15mb/google/poppy/variant/nautilus: Enable and configure DPTFSeunghwan Kim
2018-02-15mb/google/octopus: Add new boardHannah Williams
2018-02-14mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010)Jonathan Neuschäfer
2018-02-13mb/google/poppy: Fix the SPD for samsung_dimm_K4A8G165WBFurquan Shaikh
2018-02-12mainboard/google/zoombini/variants/meowth: enable touchscreenNick Vaccaro
2018-02-12google/kahlee: Select HAVE_ACPI_RESUMEMarshall Dawson
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-05 11:33:34 +0000