Age | Commit message (Expand) | Author |
2019-10-25 | mb/google/{glados,dragonegg}: Configure GPIOs in mainboard chip->init() | Furquan Shaikh |
2019-10-25 | mb/google/{drallion,sarien}: Configure GPIOs in mainboard chip->init() | Furquan Shaikh |
2019-10-25 | mb/google/{poppy,eve,fizz}: Configure GPIOs in mainboard chip->init() | Furquan Shaikh |
2019-10-25 | mb/google/hatch: Configure GPIOs in mainboard chip->init() | Furquan Shaikh |
2019-10-25 | mb/google/hatch: Set DSM parameters for Helios | Cheng-Yi Chiang |
2019-10-25 | mb/google/hatch: Fix speaker mapping for Helios | Cheng-Yi Chiang |
2019-10-24 | mb/google/hatch/var/akemi: Update DPTF thermal sensor for Akemi | Peichao Wang |
2019-10-24 | mb/google/octopus: Override VBT selection for Dorp/Vortininja/Vorticon | Tony Huang |
2019-10-24 | mb/google/{butterfly,link,parrot}: Drop wrong _ADR objects | Elyes HAOUAS |
2019-10-24 | mb/google/hatch: Select RT1011 and CHROMEOS_DSM_CALIB for Helios | Cheng-Yi Chiang |
2019-10-22 | mb/google/hatch: Enable PchPmSlpS0Vm075VSupport for hatch | Kane Chen |
2019-10-22 | google/chell: Update ICC_MAX configuration | Matt DeVillier |
2019-10-22 | mb/google/drallion: Change touch enable pin default value | Eric Lai |
2019-10-22 | mb/mainboard/hatch: support Goodix touch panel for Akemi | Peichao Wang |
2019-10-22 | mb/google/octopus: Override VBT selection for Blooglet | Tony Huang |
2019-10-21 | mb/google/glados: port to FSP 2.0 | Michael Niewöhner |
2019-10-21 | src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>' | Elyes HAOUAS |
2019-10-21 | mb/google/hatch/var/dratini: Add ELAN touchscreen support | Wisley Chen |
2019-10-21 | google/poppy: add VBT for nautilus variant | Matt DeVillier |
2019-10-21 | mb/google/hatch/akemi: disable unused devices for Akemi | Peichao Wang |
2019-10-20 | src: Remove unused 'include <string.h>' | Elyes HAOUAS |
2019-10-18 | mb/google/octopus: Create Dood variant | Tim Chen |
2019-10-18 | mb/google/hatch/var/dratini: Update DPTF parameters | Wisley Chen |
2019-10-18 | mb/google: Shrink GBB section size | Hung-Te Lin |
2019-10-16 | mb/google/hatch/akemi: Tune I2C bus 1 clock | Peichao Wang |
2019-10-16 | mb/google/hatch/var/dratini: Add enable pin for elan touchscreen | Wisley Chen |
2019-10-16 | mb/google/hatch/var/dratini: update goodix power sequence | Wisley Chen |
2019-10-16 | mb/google/drallion: Add new SPD file for drallion | Bora Guvendik |
2019-10-16 | mb/google/octopus: Override VBT selection for Blooguard | Tony Huang |
2019-10-16 | sb/intel/bd82x6x/lpc: Set up default LPC decode ranges | Arthur Heymans |
2019-10-16 | intel/broadwell: Implement proper backlight PWM config | Nico Huber |
2019-10-15 | helios: Add TEMP_SENSOR4 to DPTF | Paul Fagerburg |
2019-10-15 | mb/google/hatch: set wifi sar for dragonair | Wisley Chen |
2019-10-15 | mb/google/hatch: Initialize FPMCU_PCH_BOOT1 | Wisley Chen |
2019-10-11 | mb/google/hatch: Add new touchscreen option for Kohaku | Tim Wawrzynczak |
2019-10-10 | mb/google/octopus/variants/fleex: Update GPIOs to fix EMR | John Su |
2019-10-09 | soc/mediatek/mt8183: Run DRAM full calibration | Huayang Duan |
2019-10-09 | soc/mediatek/mt8183: Use cached calibration result for faster bootup | Huayang Duan |
2019-10-09 | mb/google/drallion: Enable UART console for arcada_cml and sarien_cml | Bernardo Perez Priego |
2019-10-09 | mb/google/hatch: Remove pen device for dratini/dragonair | Wisley Chen |
2019-10-09 | mb/[google/intel/lenovo]/*: fix posix shell bug with SPD files | Greg V |
2019-10-09 | mb/google/hatch: Set FPS as wake source | Shelley Chen |
2019-10-08 | mb/google/drallion: Add detect pin for Wacom touchscreen | Frank Wu |
2019-10-08 | mb/google/kohaku: Assign GPP_A19 as reset_gpio of stylus | Seunghwan Kim |
2019-10-07 | mb/google/hatch: Preserve MRC training data across FW update | Shelley Chen |
2019-10-07 | mb/google/octopus/variants/fleex: Adjust I2C0 CLK to meet spec | John Su |
2019-10-04 | mb/google/kukui: Extend FMAP to 8MB layout | Hung-Te Lin |
2019-10-03 | mb/[google/intel]/*: Specify Chrome EC bus - LPC or ESPI | Martin Roth |
2019-10-02 | mb/google/drallion: Disable GBE in firmware for drallion variants | Thejaswani Putta |
2019-10-02 | soc/intel: Replace config_of_path() with config_of_soc() | Kyösti Mälkki |
2019-10-02 | mb/google/drallion: Dynamicly disable memory channel | Eric Lai |
2019-10-02 | mediatek/mt8183: Rename fields of struct sdram_params | Yu-Ping Wu |
2019-09-30 | mb/google/drallion: Clean up devicetree config | Aamir Bohra |
2019-09-30 | mb/google/drallion: Configure LPSS controller parameters | Aamir Bohra |
2019-09-30 | mediatek/mt8183: Init SPM driver | Dawei Chien |
2019-09-30 | mb: remove test-only HWIDs | Hung-Te Lin |
2019-09-30 | mb/google/drallion: Adjust GPD3 pin termination | Bora Guvendik |
2019-09-30 | mb/google/drallion: De-assert WWAN reset signal | Aamir Bohra |
2019-09-28 | mb/google/variants/drallion: Update the spd index map | Aamir Bohra |
2019-09-28 | mb/google/drallion: Set UART for console to UART controller 0 | Aamir Bohra |
2019-09-26 | mb/mainboard/hatch: support elan touchpad for Akemi | Peichao Wang |
2019-09-26 | google/grunt: add new two DDR source for Treeya | Peichao Wang |
2019-09-25 | mb/google/kukui: Add new build target 'Juniper' | Hung-Te Lin |
2019-09-25 | mb/google/hatch: Move SOC_INTEL_COMETLAKE selection to Kconfig | Furquan Shaikh |
2019-09-24 | mb/google/kohaku: Update DPTF parameters and TCC offset setting | Seunghwan Kim |
2019-09-22 | mb/mainboard/hatch: add spd: 8G_3200 for Akemi | Peichao Wang |
2019-09-22 | mb/google/hatch: Add G2Touch Touchscreen support | Wisley Chen |
2019-09-20 | mb/google/hatch: Remove GPIO_DRIVER from pen eject GPIO configuration | Tim Wawrzynczak |
2019-09-20 | mb/google/hatch: override smbios manufacturer name from CBI | Wisley Chen |
2019-09-19 | mb/google/drallion: add sku id base on sensor detection | Eric Lai |
2019-09-19 | mb/google/drallion: Add memory init setup for drallion | Thejaswani Putta |
2019-09-18 | mb/google/hatch/variants/helios: Add DPTF control for ambient sensor | Sumeet Pawnikar |
2019-09-18 | mb/google/hatch/variants/helios: Update DPTF parameters | Sumeet Pawnikar |
2019-09-18 | mb/google/octopus/variants/garg: add LTE sku to config power sequence | Kevin Chiu |
2019-09-18 | mb/google/drallion: Add SPD files for drallion | Amanda Huang |
2019-09-18 | mb/google/drallion: Enable 360 sensor detection | Bernardo Perez Priego |
2019-09-18 | mb/google/drallion: Update gpio config for drallion | Varun Joshi |
2019-09-17 | google/kukui: Pass reset gpio parameter to BL31 | Tristan Shieh |
2019-09-16 | src/mainboard: Remove unused include <device/pci_ops.h> | Elyes HAOUAS |
2019-09-16 | mb/google/kohaku: Update USB port settings | Seunghwan Kim |
2019-09-15 | src/mainboard: Remove not used #include <elog.h> | Elyes HAOUAS |
2019-09-14 | arm64: Uprev Arm TF and adjust to BL31 parameter changes | Julius Werner |
2019-09-13 | mb/google/hatch: Merge emmc_sku_gpio_table and gpio_table to one table | Peichao Wang |
2019-09-13 | mb/google/drallion: Use arcada_ish.bin for arcada_cml | Selma BENSAID |
2019-09-13 | mb/google/hatch/var: Increase Goodix touchscreen reset delay to 500ms | Philip Chen |
2019-09-12 | mb/google/drallion: Update memory map | Ivy Jian |
2019-09-12 | soc/intel/cnl: Remove unnecessary FSP UPD “PchPwrOptEnable” usage | Subrata Banik |
2019-09-12 | mediatek/mt8183: tune EDID for BOE panel | Peichao Wang |
2019-09-12 | mb/google/hatch: Configure SATA DEVSLP pad reset config to PLT_RST | Aamir Bohra |
2019-09-11 | src: Remove unneeded include <arch/interrupt.h> | Elyes HAOUAS |
2019-09-11 | mb/google/hatch: Create dratini variant | Wisley Chen |
2019-09-11 | mb/google/drallion: enable Elan and Melfas touch panel | Eric Lai |
2019-09-10 | mb/google/kukui: Enable MT8183_DRAM_EMCP | Huayang Duan |
2019-09-10 | mb/google/poppy/variant/nocturne: add EC_SYNC_GPIO | Nick Vaccaro |
2019-09-10 | mb/google/hatch/variants/helios: Modify FPU power on sequence | Frank_Chu |
2019-09-10 | mb/google/octopus: Add a new sku for meep | Wisley Chen |
2019-09-10 | mb/google/kahlee/treeya: Tune I2C bus 1, 2 and 3 clock | Peichao Wang |
2019-09-09 | mb/google/hatch: Distinguish SKU1 and 2 for eMMC and SSD respectively | Peichao Wang |
2019-09-09 | lib/spd_bin: Extend DDR4 spd information | Eric Lai |
2019-09-09 | mb/google/drallion: modify USB setting | Eric Lai |