coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2020-05-13	mb/google/octopus/variants/foob: Disable xHCI compliance mode	Tommie
	When any USB image disk is connected to the DUT through HUAWEI/APPLE Dongle, press Ctrl + u on the dev screen, it cannot boot from USB. We found the SS hub cannot be enumerated. So disable xHCI compliance mode. BRANCH=octopus BUG=b:155347573 TEST=Confirm successful boot from USB Change-Id: Iea4a3df156da0627336f7d6c1e03837b6cf0e7f2 Signed-off-by: tong.lin <tong.lin@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40905 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12	trogdor: Add support for rev1	Julius Werner
	This patch implements the pin changes needed for Trogdor rev1. Unfortunately, coreboot has to get the EC and TPM SPI busses compiled into Kconfig, so we cannot really build a single image that runs on both revisions. Introduce a Kconfig to handle this instead. Change-Id: I2e48dc4565682c12089b6cf92c29f4cef4d61bb8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	trogdor: Latch GPIO interrupt support	rbokka
	Required for TPM IRQ. Change-Id: I8198213cf2808be5291620892185b1e534263e3f Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38714 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	trogdor: mainboard reference all QUPv3 FW drivers	T Michael Turney
	Change-Id: I8ff5dd63fac28ffa558aec71e79a6de87d7885e0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37306 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	treewide: Replace BSD-3-Clause and ISC headers with SPDX headers	Patrick Georgi
	Commands used: perl -i -p0e 's\|\/\[\s]Permission[\s]to[\s]use,[\s]copy,[\s]modify,[\s]and.or[\s]distribute[\s]this[\s]software[\s]for[\s]any[\s]purpose[\s]with[\s]or[\s]without[\s]fee[\s]is[\s]hereby[\s]granted,[\s]provided[\s]that[\s]the[\s]above[\s]copyright[\s]notice[\s]and[\s]this[\s]permission[\s]notice[\s]appear[\s]in[\s]all[\s]copies.[\s]THE[\s]SOFTWARE[\s]IS[\s]PROVIDED[\s].AS[\s]IS.[\s]AND[\s]THE[\s]AUTHOR[\s]DISCLAIMS[\s]ALL[\s]WARRANTIES[\s]WITH[\s]REGARD[\s]TO[\s]THIS[\s]SOFTWARE[\s]INCLUDING[\s]ALL[\s]IMPLIED[\s]WARRANTIES[\s]OF[\s]MERCHANTABILITY[\s]AND[\s]FITNESS.[\s]IN[\s]NO[\s]EVENT[\s]SHALL[\s]THE[\s]AUTHOR[\s]BE[\s]LIABLE[\s]FOR[\s]ANY[\s]SPECIAL,[\s]DIRECT,[\s]INDIRECT,[\s]OR[\s]CONSEQUENTIAL[\s]DAMAGES[\s]OR[\s]ANY[\s]DAMAGES[\s]WHATSOEVER[\s]RESULTING[\s]FROM[\s]LOSS[\s]OF[\s]USE,[\s]DATA[\s]OR[\s]PROFITS,[\s]WHETHER[\s]IN[\s]AN[\s]ACTION[\s]OF[\s]CONTRACT,[\s]NEGLIGENCE[\s]OR[\s]OTHER[\s]TORTIOUS[\s]ACTION,[\s]ARISING[\s]OUT[\s]OF[\s]OR[\s]IN[\s]CONNECTION[\s]WITH[\s]THE[\s]USE[\s]OR[\s]PERFORMANCE[\s]OF[\s]THIS[\s]SOFTWARE.[\s]\\/\|/* SPDX-License-Identifier: ISC /\|s' $(cat filelist) perl -i -p0e 's\|(\#\#)\sPermission[\#\s]to[\#\s]use,[\#\s]copy,[\#\s]modify,[\#\s]and.or[\#\s]distribute[\#\s]this[\#\s]software[\#\s]for[\#\s]any[\#\s]purpose[\#\s]with[\#\s]or[\#\s]without[\#\s]fee[\#\s]is[\#\s]hereby[\#\s]granted,[\#\s]provided[\#\s]that[\#\s]the[\#\s]above[\#\s]copyright[\#\s]notice[\#\s]and[\#\s]this[\#\s]permission[\#\s]notice[\#\s]appear[\#\s]in[\#\s]all[\#\s]copies.[\#\s]THE[\#\s]SOFTWARE[\#\s]IS[\#\s]PROVIDED[\#\s].AS[\#\s]IS.[\#\s]AND[\#\s]THE[\#\s]AUTHOR[\#\s]DISCLAIMS[\#\s]ALL[\#\s]WARRANTIES[\#\s]WITH[\#\s]REGARD[\#\s]TO[\#\s]THIS[\#\s]SOFTWARE[\#\s]INCLUDING[\#\s]ALL[\#\s]IMPLIED[\#\s]WARRANTIES[\#\s]OF[\#\s]MERCHANTABILITY[\#\s]AND[\#\s]FITNESS.[\#\s]IN[\#\s]NO[\#\s]EVENT[\#\s]SHALL[\#\s]THE[\#\s]AUTHOR[\#\s]BE[\#\s]LIABLE[\#\s]FOR[\#\s]ANY[\#\s]SPECIAL,[\#\s]DIRECT,[\#\s]INDIRECT,[\#\s]OR[\#\s]CONSEQUENTIAL[\#\s]DAMAGES[\#\s]OR[\#\s]ANY[\#\s]DAMAGES[\#\s]WHATSOEVER[\#\s]RESULTING[\#\s]FROM[\#\s]LOSS[\#\s]OF[\#\s]USE,[\#\s]DATA[\#\s]OR[\#\s]PROFITS,[\#\s]WHETHER[\#\s]IN[\#\s]AN[\#\s]ACTION[\#\s]OF[\#\s]CONTRACT,[\#\s]NEGLIGENCE[\#\s]OR[\#\s]OTHER[\#\s]TORTIOUS[\#\s]ACTION,[\#\s]ARISING[\#\s]OUT[\#\s]OF[\#\s]OR[\#\s]IN[\#\s]CONNECTION[\#\s]WITH[\#\s]THE[\#\s]USE[\#\s]OR[\#\s]PERFORMANCE[\#\s]OF[\#\s]THIS[\#\s]SOFTWARE.\s(\# \n)\|\1 SPDX-License-Identifier: ISC\n\n\|s' $(cat filelist) perl -i -p0e 's\|\/\[\s]Redistribution[\s]and[\s]use[\s]in[\s]source[\s]and[\s]binary[\s]forms,[\s]with[\s]or[\s]without[\s]modification,[\s]are[\s]permitted[\s]provided[\s]that[\s]the[\s]following[\s]conditions[\s]are[\s]met:[\s][1. ]Redistributions[\s]of[\s]source[\s]code[\s]must[\s]retain[\s]the[\s]above[\s]copyright[\s]notice,[\s]this[\s]list[\s]of[\s]conditions[\s]and[\s]the[\s]following[\s]disclaimer.[\s][\s][2. ]Redistributions[\s]in[\s]binary[\s]form[\s]must[\s]reproduce[\s]the[\s]above[\s]copyright[\s]notice,[\s]this[\s]list[\s]of[\s]conditions[\s]and[\s]the[\s]following[\s]disclaimer[\s]in[\s]the[\s]documentation[\s]and.or[\s]other[\s]materials[\s]provided[\s]with[\s]the[\s]distribution.[\s][3. ].used[\s]to[\s]endorse[\s]or[\s]promote[\s]products[\s]derived[\s]from[\s]this[\s]software[\s]without[\s]specific[\s]prior[\s]written[\s]permission.[\s]THIS[\s]SOFTWARE[\s]IS[\s]PROVIDED.AS[\s]IS.[\s]AND[\s]ANY[\s]EXPRESS[\s]OR[\s]IMPLIED[\s]WARRANTIES,[\s]INCLUDING,[\s]BUT[\s]NOT[\s]LIMITED[\s]TO,[\s]THE[\s]IMPLIED[\s]WARRANTIES[\s]OF[\s]MERCHANTABILITY.FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.ARE[\s]DISCLAIMED.[\s]IN[\s]NO[\s]EVENT[\s]SHALL.LIABLE[\s]FOR[\s]ANY[\s]DIRECT,[\s]INDIRECT,[\s]INCIDENTAL,[\s]SPECIAL,[\s]EXEMPLARY,[\s]OR[\s]CONSEQUENTIAL[\s]DAMAGES[\s].INCLUDING,[\s]BUT[\s]NOT[\s]LIMITED[\s]TO,[\s]PROCUREMENT[\s]OF[\s]SUBSTITUTE[\s]GOODS[\s]OR[\s]SERVICES;[\s]LOSS[\s]OF[\s]USE,[\s]DATA,[\s]OR[\s]PROFITS;[\s]OR[\s]BUSINESS[\s]INTERRUPTION.[\s]HOWEVER[\s]CAUSED[\s]AND[\s]ON[\s]ANY[\s]THEORY[\s]OF[\s]LIABILITY,[\s]WHETHER[\s]IN[\s]CONTRACT,[\s]STRICT[\s]LIABILITY,[\s]OR[\s]TORT[\s].INCLUDING[\s]NEGLIGENCE[\s]OR[\s]OTHERWISE.[\s]ARISING[\s]IN[\s]ANY[\s]WAY[\s]OUT[\s]OF[\s]THE[\s]USE[\s]OF[\s]THIS[\s]SOFTWARE,[\s]EVEN[\s]IF[\s]ADVISED[\s]OF[\s]THE[\s]POSSIBILITY[\s]OF[\s]SUCH[\s]DAMAGE.[\s]\\/\|/ SPDX-License-Identifier: BSD-3-Clause /\|s' $(cat filelist) $1 perl -i -p0e 's\|(\#\#) Redistribution[\#\s]and[\#\s]use[\#\s]in[\#\s]source[\#\s]and[\#\s]binary[\#\s]forms,[\#\s]with[\#\s]or[\#\s]without[\#\s]modification,[\#\s]are[\#\s]permitted[\#\s]provided[\#\s]that[\#\s]the[\#\s]following[\#\s]conditions[\#\s]are[\#\s]met:[\#\s][1. ]Redistributions[\#\s]of[\#\s]source[\#\s]code[\#\s]must[\#\s]retain[\#\s]the[\#\s]above[\#\s]copyright[\#\s]notice,[\#\s]this[\#\s]list[\#\s]of[\#\s]conditions[\#\s]and[\#\s]the[\#\s]following[\#\s]disclaimer.[\#\s][2. ]Redistributions[\#\s]in[\#\s]binary[\#\s]form[\#\s]must[\#\s]reproduce[\#\s]the[\#\s]above[\#\s]copyright[\#\s]notice,[\#\s]this[\#\s]list[\#\s]of[\#\s]conditions[\#\s]and[\#\s]the[\#\s]following[\#\s]disclaimer[\#\s]in[\#\s]the[\#\s]documentation[\#\s]and.or[\#\s]other[\#\s]materials[\#\s]provided[\#\s]with[\#\s]the[\#\s]distribution.[\#\s][\#\s][3. ].used[\#\s]to[\#\s]endorse[\#\s]or[\#\s]promote[\#\s]products[\#\s]derived[\#\s]from[\#\s]this[\#\s]software[\#\s]without[\#\s]specific[\#\s]prior[\#\s]written[\#\s]permission.[\#\s]THIS[\#\s]SOFTWARE[\#\s]IS[\#\s]PROVIDED.AS[\#\s]IS.[\#\s]AND[\#\s]ANY[\#\s]EXPRESS[\#\s]OR[\#\s]IMPLIED[\#\s]WARRANTIES,[\#\s]INCLUDING,[\#\s]BUT[\#\s]NOT[\#\s]LIMITED[\#\s]TO,[\#\s]THE[\#\s]IMPLIED[\#\s]WARRANTIES[\#\s]OF[\#\s]MERCHANTABILITY.FITNESS[\#\s]FOR[\#\s]A[\#\s]PARTICULAR[\#\s]PURPOSE.ARE[\#\s]DISCLAIMED.[\#\s]IN[\#\s]NO[\#\s]EVENT[\#\s]SHALL.LIABLE[\#\s]FOR[\#\s]ANY[\#\s]DIRECT,[\#\s]INDIRECT,[\#\s]INCIDENTAL,[\#\s]SPECIAL,[\#\s]EXEMPLARY,[\#\s]OR[\#\s]CONSEQUENTIAL[\#\s]DAMAGES[\#\s].INCLUDING,[\#\s]BUT[\#\s]NOT[\#\s]LIMITED[\#\s]TO,[\#\s]PROCUREMENT[\#\s]OF[\#\s]SUBSTITUTE[\#\s]GOODS[\#\s]OR[\#\s]SERVICES;[\#\s]LOSS[\#\s]OF[\#\s]USE,[\#\s]DATA,[\#\s]OR[\#\s]PROFITS;[\#\s]OR[\#\s]BUSINESS[\#\s]INTERRUPTION.[\#\s]HOWEVER[\#\s]CAUSED[\#\s]AND[\#\s]ON[\#\s]ANY[\#\s]THEORY[\#\s]OF[\#\s]LIABILITY,[\#\s]WHETHER[\#\s]IN[\#\s]CONTRACT,[\#\s]STRICT[\#\s]LIABILITY,[\#\s]OR[\#\s]TORT[\#\s].INCLUDING[\#\s]NEGLIGENCE[\#\s]OR[\#\s]OTHERWISE.[\#\s]ARISING[\#\s]IN[\#\s]ANY[\#\s]WAY[\#\s]OUT[\#\s]OF[\#\s]THE[\#\s]USE[\#\s]OF[\#\s]THIS[\#\s]SOFTWARE,[\#\s]EVEN[\#\s]IF[\#\s]ADVISED[\#\s]OF[\#\s]THE[\#\s]POSSIBILITY[\#\s]OF[\#\s]SUCH[\#\s]DAMAGE.\s(\#* \n)\|\1 SPDX-License-Identifier: BSD-3-Clause\n\n\|s' $(cat filelist) Change-Id: I7ff9c503a2efe1017a4666baf0b1a758a04f5634 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-11	treewide: Remove "this file is part of" lines	Patrick Georgi
	Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " \|egrep ":( /\.\/\$\|#\|;#\|-- \| \ )" \| cut -d: -f1 \|grep -v crossgcc \|grep -v gcov \| grep -v /elf.h \|grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. /") -# This file is part of a set of unofficial pre-commit hooks available -/ This file is part of coreboot / -# This file is part of msrtool. -/ This file is part of msrtool. / - This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. / - This file is part of the coreboot project. - /* This file is part of the coreboot project. / -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/ This file is part of the coreboot project / -/ This file is part of the coreboot project. / -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. / -/ This file is part of the ectool project. / - This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. / -## This file is part of the superiotool project. -/ This file is part of the superiotool project / -/ This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mb/google/cyan/*: fixup GPIOs	Matt DeVillier
	Commit 73b723d [google/cyan: Switch Touchpad and Touchscreen...] in additon to changing the touchpad/touchscreen interrupts from edge to level triggered, also marked them as maskable. This was partially reverted in a86bbea0 [google/cyan: set touchscreen GPIO to non_maskable], but did not resolve all of the issues. Additionally, 73b723d also accidentally changed the pad interrupt select from L3 to L1 for all touchscreen GPIOs. Clean up this mess by setting all touchpad/touchscreen GPIOs back to maskable, and set the pad level to L3 for all touchscreen GPIOs. Tested on several cyan variants Change-Id: I70e8e2d4ff317c3b9b4108ed6c5bc80e9b0bbc75 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-11	mb/google/octopus/variants/dood: Disable XHCI LFPS power management	Kenneth Chan
	LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] are set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2020-05-11	mb/google/kukui: fix screen scrolling on devices using anx7625	Paul Ma
	anx7625 enables MIPI receiver to check EOTP packet as default. If MIPI_DSI_MODE_EOT_PACKET is not set in flags, soc dsi will not send out EOTP packet and some panel models will display abnormal such as scrolling all the time. BUG=b:144824303 BRANCH=kukui TEST=boot damu board, edp panel with anx7625 as bridge boots up without scrolling. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: Iad651202bde2a40024af8c12153143ada2ce2439 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41161 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mb/google/kukui: Fix backlight flash white before show logo	Jitao Shi
	Turn backlight off before panel poweron. BUG=b:155107047 TEST=make # board = kukui BRANCH=kukui Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I0f31923bd7c1dfa26d4b1bbd0a230ae400b08ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41146 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mb/google/octopus: Fix default FMD	Matt DeVillier
	On Apollo Lake/Gemini Lake platforms, FSP requires more than a simple RW_MRC_CACHE; without the RECOVERY and VAR cache regions, FSP-m will fail on s3 resume and trigger a full reset instead. This fixes the default.fmd for octopus to match that used for reef. Test: build/boot google/ampton, verify sleep/resume works under Linux with 5.x kernel. Change-Id: I8565aa93256df7d6e0b359d70e9305f34e5ccb60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-10	mb/google/kahlee: Hold WLAN PCIe reset low at boot for mordin	Kevin Chiu
	gpio70 is assigned to use as WLAN rst in new schematic to fulfill RTK RTL8822CE power sequence: WLAN rst will need to be active at least 50ms after WLAN power on. Also in order to keep the rst low in consistency, override default gpio70 to low. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I98c8afe42b7f92016f83483acbb3b9ae64b159f7 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40805 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-10	mb/google/kahlee: Don't reset the touchpad/screen on boot	Martin Roth
	touchpad & touchscreen power enable gets reset during resume causing unintended wake interrupts, causing dark resume failures. This prevents the board from being shut down after it's been suspended for a long period of time and can end up draining the battery. BUG=b:153173717 TEST=Build only - Needs to be tested by ODMs. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If403da8853e59eaaf589062c9bd6f10deb626998 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
2020-05-10	src/mainboard: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I64d9468682a4aae3084b17b8724d035f17d01dff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-09	src/: Replace GPL boilerplate with SPDX headers	Patrick Georgi
	Used commands: perl -i -p0e 's\|\/\[\s].is free software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and\/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]version[\s]2[\s]of[\s]the[\s]License.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.[\s]\\/\|/ SPDX-License-Identifier: GPL-2.0-only /\|' $(cat filelist) perl -i -p0e 's\|\/\[\s].is[\s]free[\s]software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]either[\s]version[\s]2[\s]of[\s]the[\s]License,[\s]or[\s].at[\s]your[\s]option.[\s]any[\s]later[\s]version.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.[\s]\\/\|/* SPDX-License-Identifier: GPL-2.0-or-later /\|' $(cat filelist) perl -i -p0e 's\|\/\[\s].is[\s#]free[\s#]software[;:,][\s#]you[\s#]can[\s#]redistribute[\s#]it[\s#]and/or[\s#]modify[\s#]it[\s#]under[\s#]the[\s#]terms[\s#]of[\s#]the[\s#]GNU[\s#]General[\s#]Public[\s#]License[\s#]as[\s#]published[\s#]by[\s#]the[\s#]Free[\s#]Software[\s#]Foundation[;:,][\s#]either[\s#]version[\s#]3[\s#]of[\s#]the[\s#]License[;:,][\s#]or[\s#].at[\s#]your[\s#]option.[\s#]any[\s#]later[\s#]version.[\s#]This[\s#]program[\s#]is[\s#]distributed[\s#]in[\s#]the[\s#]hope[\s#]that[\s#]it[\s#]will[\s#]be[\s#]useful[;:,][\s#]but[\s#]WITHOUT[\s#]ANY[\s#]WARRANTY[;:,][\s#]without[\s#]even[\s#]the[\s#]implied[\s#]warranty[\s#]of[\s#]MERCHANTABILITY[\s#]or[\s#]FITNESS[\s#]FOR[\s#]A[\s#]PARTICULAR[\s#]PURPOSE.[\s#]See[\s#]the[\s#]GNU[\s#]General[\s#]Public[\s#]License[\s#]for[\s#]more[\s#]details.[\s]\\/\|/* SPDX-License-Identifier: GPL-3.0-or-later /\|' $(cat filelist) perl -i -p0e 's\|(\#\#)[\w].is free software[:;][\#\s]you[\#\s]can[\#\s]redistribute[\#\s]it[\#\s]and\/or[\#\s]modify[\#\s]it[\s\#]under[\s \#]the[\s\#]terms[\s\#]of[\s\#]the[\s\#]GNU[\s\#]General[\s\#]Public[\s\#]License[\s\#]as[\s\#]published[\s\#]by[\s\#]the[\s\#]Free[\s\#]Software[\s\#]Foundation[;,][\s\#]version[\s\#]2[\s\#]of[\s\#]the[\s\#]License.[\s\#]This[\s\#]program[\s\#]is[\s\#]distributed[\s\#]in[\s\#]the[\s\#]hope[\s\#]that[\s\#]it[\s\#]will[\#\s]be[\#\s]useful,[\#\s]but[\#\s]WITHOUT[\#\s]ANY[\#\s]WARRANTY;[\#\s]without[\#\s]even[\#\s]the[\#\s]implied[\#\s]warranty[\#\s]of[\#\s]MERCHANTABILITY[\#\s]or[\#\s]FITNESS[\#\s]FOR[\#\s]A[\#\s]PARTICULAR[\#\s]PURPOSE.[\#\s]See[\#\s]the[\#\s]GNU[\#\s]General[\#\s]Public[\#\s]License[\#\s]for[\#\s]more[\#\s]details.\s(# \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) perl -i -p0e 's\|(\#\#)[\w].is free software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and\/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]version[\s]2[\s]of[\s]the[\s]License.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.\s(#* \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	mb/google/reef: add G2 TS support for snappy	Kevin Chiu
	Add G2 GTCH7503 HID TS support spec from G2: G7500 / Ver.1.2 (3, April, 2018) BUG=b:155827595 BRANCH=master TEST=emerge-snappy coreboot Change-Id: I151bf141148f4f00b3dadd9c44ab3a6b7731cde1 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41090 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06	treewide: replace GPLv2 long form headers with SPDX header	Patrick Georgi
	This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's\|/\[\n\t ]This program is free software[:;].you.can.redistribute.it.and/or.modify.it.under.the.terms.of.the.GNU.General.Public.License.as.published.by.the.Free.Software.Foundation[;,].version.2.of.the.License.or.(at.your.option).any.later.version.+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/ SPDX-License-Identifier: GPL-2.0-or-later /\|s' $(cat filelist) perl -i -p0e 's\|/\[\n\t ]This program is free software[:;].you.can.redistribute.it.and/or.modify.it.under.the.terms.of.the.GNU.General.Public.License.as.published.by.the.Free.Software.Foundation[;,].version.2.+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/* SPDX-License-Identifier: GPL-2.0-only /\|s' $(cat filelist) perl -i -p0e 's\|/\[\n\t ]This program is free software[:;].you.can.redistribute.it.and/or.modify.it.under.the.terms.of.the.GNU.General.Public.License.version.2.as.published.by.the.Free.Software.Foundation[.;,].+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/* SPDX-License-Identifier: GPL-2.0-only /\|s' $(cat filelist) perl -i -p0e 's\|/\[\n\t ]This software is licensed under.the.terms.of.the.GNU.General.Public.License.version.2.as.published.by.the.Free.Software.Foundation,.+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/* SPDX-License-Identifier: GPL-2.0-only */\|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06	treewide: Move "is part of the coreboot project" line in its own comment	Patrick Georgi
	That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's\|/\.\n.This file is part of the coreboot project.\n.\\|/* This file is part of the coreboot project. /\n/\|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06	soc/intel/tgl: Synchronize GPIO ASL table with Linux kernel	Shaunak Saha
	Kernel pinctrl driver changed for Tiger Lake and went to old scheme. Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/ third_party/kernel/+/2116670 BUG=b:151683980 BRANCH=none TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl verify INTC34C5:00 listing all the pins. Cq-Depend:chromium:2116670 Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06	mb/google/dedede: Enable PMC, P2SB and PCH SPI in the devicetree	Karthikeyan Ramasubramanian
	BUG=None TEST=Build and boot the mainboard. Change-Id: I1aae4adf1c13fd4ff58aa38a877f34e142f320f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41037 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	soc/intel/skl: always enable SataPwrOptEnable	Michael Niewöhner
	For unknown reasons FSP skips a whole bunch of SIR (SATA Initialization Registers) when SataPwrOptEnable=0, which currently is the default in coreboot and FSP. Even if FSP's default was 1, coreboot would reset it. This can lead to all sorts of problems and errors, for example: - links get lost - only 1.5 or 3 Gbps instead of 6 Gbps - "unaligned write" errors in Linux - ... At least on two boards (supermicro/x11-lga1151-series/x11ssm-f and purism/librem13v2) SATA is not working correctly and showing such symptoms. To let FSP correctly initialize the SATA controller, enable the option SataPwrOptEnable statically. There is no valid reason to disable it, which might break SATA, anyway. Currently, there are no reported issues on CML and CNL, so a change there could not be tested reliably. SKL/KBL was tested successfully without any noticable downsides. Thus, only SKL gets changed for now. Change-Id: I8531ba9743453a3118b389565517eb769b5e7929 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40877 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	mb/google/dedede: Read DRAM part number from CBI	Marco Chen
	The index of MEM_STRAPS will be migrated from per DRAM part number to per DRAM characteristic therefore one index mapped to a single SPD binary can represent to multiple DRAM part numbers as long as their characteristic is the same for DRAM controller to support. In this case, the real DRAM part number would be provisioned in the CBI instead of SPD in the factory flow. As a result, we need to extract DRAM part number from CBI. BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. check DRAM part number is correct in SMBIOS for memory device Change-Id: I40780a35e04efb279591e9db179cb86b5e907c0d Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-02	acpi: Move ACPI table support out of arch/x86 (3/5)	Furquan Shaikh
	This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" \| xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02	mb/google/reef: Add and use VBT	Matt DeVillier
	Add VBT file, and override use via Kconfig since all Reef variants use the same VBT file. VBT extracted from firmware in ChromeOS recovery image. Test: built/boot google/reef w/FSP display init Change-Id: I31156ec7371c0443719fdd9ddac6ed4960c83767 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02	mainboard/google/kahlee: Add hook for early wlan rst gpio init	Kevin Chiu
	Base on the grunt board schematic, gpio70 is an alternative way for wlan rst. Add hook for variants to override default state. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Change-Id: Ic3f1c016357dd5090e6adedf96e7593abff29a0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-02	payloads/seabios: Add Hardware IRQ Kconfig	Matt DeVillier
	Certain boards require SeaBIOS' HARDWARE_IRQ option to be deselected in order for the platform to boot. Add a Kconfig to allow selection of HARDWARE_IRQ enablement, and write to SeaBIOS' .config file in cases where it needs to be disabled. Deselect the option for google/rambi variants so they boot with boards defaults. Test: build/boot google/clapper, verify board boots vs hanging at boot menu prompt. Change-Id: I23e9b30d2d1042c86bd10f134d6fe361edaf8cb2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02	mb/google/reef: add default non-ChromeOS FMAP	Matt DeVillier
	Add a FMAP which supports SMMSTORE and non-ChromeOS payloads, since Apollo Lake-based devices like Reef cannot use an automatically-generated FMAP due to strict layout requirements. Change-Id: If570f92f4f81c0e29777c87756fc5e45af549064 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01	mb/google/dedede: Fix crossystem wpsw_cur error	Subrata Banik
	Add GPIO_PCH_WP (GPP_C11) to associate GPP_PCH_WP with community zero. TEST=Build coreboot, flash, boot to and log into kernel, execute "wp enable" in console, execute "crossystem" at kernel prompt and verify that "wpsw_cur" shows as being "1", Execute "wp disable" in console, execute "crossystem" at kernel prompt and verify "wpsw_cur" is 0. Change-Id: Ie4ae1365a7611b8be3e795798c171e3f7ea9e417 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40744 Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01	mb/google/deltaur: Add BT reset gpio	Eric Lai
	Harrison Peak (HrP) 9560 module needs a reset pin for BT power sequence. BUG=b:155248677 TEST=Boot into OS and check BT is functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I55ed1b095ba53c414c44088f4a6e7720b970e2f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-01	mb/google/deltaur: Update USB/WWAN config	Ivy Jian
	Update USB3 ports configuration as schematics design. BUG=b:155026295 TEST=Boot into OS and check WWAN device detected by lsusb. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Icb938e5a9c05fcc9772219b081a6f05334261baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40818 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01	mainboard/google/kahlee: move specific setting to variant	Kevin Chiu
	Separate specific setting to variant from baseboard. baseboard/romstage.c in current release is only utilized by careena, we could remove it from the rest of variant build. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I658526e44aadc47bdc5538f506a1bfe2e5f20f63 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-01	mb/google/octopus/variants/bobba: Disable XHCI LFPS power management	Sheng-Liang Pan
	LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-01	mb/google/volteer/malefor: Enable touch screen	William Wei
	Enable Goodix touch screen and ensure it works properly. BUG=b:154191288 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the Goodix touch screen function. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I236ac56dd0a1817092151bae93e699115ba88e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40598 Reviewed-by: Alex Levin <levinale@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01	mb/google/hatch/vr/puff: Add psys_pmax calculation	Tim Chen
	This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Change-Id: Iff767d4b44a01e766258345545438a54a16d1af5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-01	mb/google/dedede: Enable USB port for camera support	Ian Feng
	Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01	src: Remove not used 'include <smbios.h>'	Elyes HAOUAS
	Change-Id: I12345a5b6c9ce94ca9f8b555154b2278a8ff97bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01	mb/google/dedede: Remove pad termination for RAM_STRAP_4	Karthikeyan Ramasubramanian
	The stuffed resistor straps are weaker compared to the internal pull-up. This can cause the GPIO to read '1' always. Remove the internal pull-up. Also read the GPIO only on the boards where the board version is populated. BUG=b:154301008 TEST=Build and boot the mainboard. Change-Id: Ib640211b9f50dfb0174a570eda1625bacbebb855 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01	Helios: Update DPTF settings for smooth fan speed control	Sumeet R Pawnikar
	Update DPTF settings for smooth fan speed control. BRANCH=firmware-hatch-12672.B BUG=b:154074920 TEST=Built and test on Helios system Change-Id: I3f4d9fd9e17541dd5fb7982a8b43a039c41cba87 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01	mb/google/dedede: Enable camera support for waddledoo	Pandya, Varshit B
	BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: I51dcf96a82535fc1e0b9247fd52af919885575e5 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01	mb/google/dedede: Add ACPI support for camera	Pandya, Varshit B
	1. Add support as per the schematics 2. Add 2 Ports and 2 Endpoints 3. Add support for OTVI8856 and OTVI5676 4. Add ON and OFF logic as Power Rails are same for both sensor BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: Ic8687bce4896d9fc17b2190b8d11618af3515cc1 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01	mb/google/dedede: add new variant for wheelie	Peichao Wang
	Add initial support for wheelie variant board. BUG=b:154664137 BRANCH=None TEST=build Change-Id: Id638e987f45c247dae824f221a38ccf32626572f Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01	mb/google/nightfury: Tune the usb2_port[0] strength	Seunghwan Kim
	Update usb2 port strength parameter for usb2_port[0] to improve SI. BUG=b:154668734 BRANCH=firmware-hatch-12672.B TEST=Built and checked SI margin of USB2 ports Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I8b4b58a67dc0835a677770a2968e8d8d61e0374f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-30	mb/google/voteer: Enable DevSlp for SATA port1	Wonkyu Kim
	BUG=b:152893285 BRANCH=none TEST=Build and boot to OS volteer with Intel SATA and reboot from OS console Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibed8f8c445bf2ac2290ffb670d8dfb83fc960438 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30	mb/google/volteer: Create trondo variant	David Wu
	Create the trondo variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:154678884 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TRONDO Change-Id: Ie4f9bfe4798e14f91c6cb439f5c5ab2b9ea52b51 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40686 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30	mb/google/puff: update USB2 strength	Tim Chen
	Based on USB SI report to fine tune the strength for USB2 port0. BRANCH=none BUG=b:153590143 TEST=build and test USB2 port0 function works fine. Change-Id: I070c9e1c8153a680fb8f827889738a764d7ea9f4 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-29	mb/google/volteer: Include TCSS power management	John Zhao
	Include TCSS RTD3 into ACPI DSDT table. BUG=b:140290596 TEST=Booted to kernel and verified tcss xhci/pcierp/dma power state D3 entry/exit. Change-Id: Iae31a29eb23f7370737d097dd401f4056b8b7052 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-29	mb/google/octopus/variants/garg: update Garfour SKU ID	Tony Huang
	SKUID: 49 - Garfour EVT (touch, TypeA DB) 50 - Garfour EVT (non-touch, HDMI DB) BUG=b:152861752 BRANCH=octopus TEST=emerge-octopus coreboot chromeos-bootimage Change-Id: I656a2bb2404efded6da6697664748b6c8d2ca4e0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Marco Chen <marcochen@google.com>
2020-04-29	mb/google/hatch/romstage_spd_smbus.c: Fix missing DIMM issue	Edward O'Callaghan
	Since `commit 0ee9b14c09c` the SPD array is set to NULL if no DIMM is present. This causes failure due to an unconditional use of `blk.spd_array[i]`, : i={0,1}. This validates the spd_array is non-NULL before use otherwise it sets the DIMM as not present. Puff fails boot with the following log: ``` ... SPD: banks 16, ranks 2, rows 16, columns 10, density 8192 Mb SPD: device width 8 bits, bus width 64 bits SPD: module size is 16384 MB (per channel) ASSERTION ERROR: file 'src/soc/intel/cannonlake/cnl_memcfg_init.c', line 47 ``` BUG=b:155220125 BRANCH=none TEST=none Change-Id: I5f47c849344951d53fa8c67e779b7c46d632d124 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40820 Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29	mb/google/volteer: Work around TPM issue by enabling GPIO PM in S0ix	Venkata Krishna Nimmagadda
	Setting the default values for GPIO community power management, causes issues in detecting TPM interrupts. So to avoid that GPIO PM has to be disabled in devicetree. But for S0ix it is needed. This patch implements a workaround in ASL code to enable GPIO PM on S0ix entry and disable it on S0ix exit. This patch adds the following three platform specific methods. 1. MS0X to enable power management features for GPIO communities on entry and on exit, it disables them. 2. MPTS to enable power management features for GPIO communities when preparing to sleep. 3. MWAK to disable power management features for GPIO communities on waking up. BUG=b:148892882 BRANCH=none TEST="Boot with this change on volteer proto1 and check for GPIO community config with debugger" Signed-off-by: Venkata Krishna Nimmagadda <venkata.krishna.nimmagadda@intel.com> Change-Id: If522c82c0069a4bf5738beb73a2b4f11ed6f51d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40261 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Venkata Krishna Nimmagadda <Venkata.krishna.nimmagadda@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28	mb/google/volteer: move mipi_camera.asl to variants folders	Nick Vaccaro
	Moves mipi_camera.asl from mb/google/volteer/acpi/ to mb/google/volteer/variant/baseboard/include/baseboard/acpi/. Adds mipi_camera.asl to variant/[volteer\|ripto]/include/acpi/. Adds new VARIANT_HAS_MIPI_CAMERA Kconfig option. Adds VARIANT_HAS_MIPI_CAMERA for volteer and ripto variants. BUG=b:154648941, b:154646959 TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot Ripto and Volteer to kernel. Change-Id: I2f28243dfb945857d26f27f07968a15a3eeb7a4f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40578 Reviewed-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28	mb/google/volteer: implement mainboard_get_dram_part_num()	Nick Vaccaro
	Implements mainboard_get_dram_part_num() to override dram part number with a part number read from CBI. BUG=b:146464098 TEST="emerge-volteer coreboot chromeos-bootimage", flash volteer, boot and log into kernel, execute "mosys memory spd print id" and verify that the memory part number from the cbi gets displayed properly. Change-Id: I3a20691f601cb513ee0936c8d141233c3d06db3d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-28	device: Constify struct device * parameter to write_acpi_tables	Furquan Shaikh
	.write_acpi_tables() should not be updating the device structure. This change makes the struct device * argument to it as const. Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-28	mb/google/deltaur: Disable POWER_OFF_ON_CR50_UPDATE	Eric Lai
	This is missing configuration of Wiloc projects. Following Wilco projects configuration. CB:32436 The power architecture on this platform is different than most of our other x86 devices and needs some special handling to ensure it powers up again after an EC reset. BUG=b:150165131 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I6da89de9401793a4e5c56a23c1018527819718cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40663 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28	mb/google/deltaur: Change H1 I2C speed to STANDARD	Eric Lai
	Currently, Deltaur’s I2C speed has not been tuned yet, so slow down the H1 I2C to avoid I2C error for short term. Error logs: Reading cr50 TPM mode I2C receive timeout I2C read failed: bus 3 addr 0x50 BUG=b:154310066 TEST=Check H1 has no I2C error occurring and can be updated by gsctool. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I85a63c1ab9a51d254873377a36d56823af11f0a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40644 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28	mb/google/deltaur: Enable PS/2 keyboard	Eric Lai
	By default, the ACPI status method _STA returns false for the PS/2 keyboard and mouse device of the Wilco EC, so the OS does not enable it. Enable these devices, by defining the macro SIO_EC_ENABLE_PS2K. BUG=b:154790509 TEST=Check Keyboard is functional under OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I31c74ddb3608589e5a4753c7e487f250b112bb1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40745 Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28	mb/google/octopus: add default non-ChromeOS FMAP	Matt DeVillier
	Add a FMAP which supports SMMSTORE and non-ChromeOS payloads, since GeminiLake-based devices like Octopus cannot use an automatically-generated FMAP due to strict layout requirements. Change-Id: Iebacbea5b3a782b2abf1d6e28acd21b87dc9402b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40596 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28	mb/google/octopus: Add VBT for ampton variant	Matt DeVillier
	Add VBT file, extracted from stock Google firmware, and select its use via Kconfig. Change-Id: I256c1c72d1d1e40ea9426fa717bfc4f9c950a91f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-27	mb/google/deltaur: Enable DRIVERS_I2C_HID for Touchpad	Eric Lai
	Cirque touchpad uses I2C_HID driver. BUG=b:152931802 TEST=Touch pad can work well in the OS. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3f8d5abad2f153f395ba7e3f979ad3d2526e040c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-27	mb/google/deltaur: Move the code under domain	Eric Lai
	Chip drivers not overrided if out of domain. Only device can get override, so move the code under domain. BUG=b:152924290,b:152931802 TEST=Touch screen and Touch pad can work well. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iaaa73e36ec268d26ebd3cafab79179fe22a926a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-27	mb/google/hatch/var/jinlon: Update DPTF parameters	Wisley Chen
	The change applies the DPTF parameters received from the thermal team. 1. Set PL1 Min to 3W 2. Set sample period of TCPU/TSR0/TSR1 to 30 Sec 3. Enable EC_ENABLE_MULTIPLE_DPTF_PROFILES and add trigger points for tablet mode. 4. Update trigger points of CPU/TSR0/TSR1 BUG=b:154564062, b:154290855 BRANCH=hatch TEST=build and verified by thermal team. Change-Id: I87170e63de222487a3bda1217c4ee87a2ec1984f Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-27	mb/google/volteer: add touchscreen entry to Volteer	Alex Levin
	BUG=b:149588766 TEST=ELAN and Goodix touchscreen works. Signed-off-by: Alex Levin <levinale@chromium.org> Change-Id: I1c3e75eb03a8ab434ee58bf36a155f2255612083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-04-25	mb/google/deltaur: Move early gpio table to variants	Eric Lai
	If set variant early gpio table NULL, it will override the baseboard table. Move early gpio table to variant level. BUG=b:154310066 TEST=Check H1 has no I2C error occurs. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ie4c4648ccf918446a499019a4f77f64e43a92c76 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-25	mb/google/hatch/var/jinlon: Tune i2c frequency under 400 KHz	Wisley Chen
	Tuning i2c frequency for jinlon: I2C0: 392.7 KHz I2C1: 390 KHz I2C3: unused I2C4: 388.8 KHz BUG=b:154900217 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage, and measured with scope Change-Id: I9b186193f34027d03dd349cf1e29bb266b167383 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-24	mb/google/hatch: Change baseboard EC wake & SCI masks to match kohaku	Tim Wawrzynczak
	1) Allows MKBP events from the EC to wake the system from suspend states. 2) Remove EC_HOST_EVENT_MKBP from the EC_SCI_EVENTS mask, so that MKBP events don't generate an SCI. The EC is also being changed to use host events to wake up the system, and use the EC_INT_L line for MKBP IRQ signalling. Otherwise, there would be two IRQs generated for MKBP events. BUG=b:148976961 BRANCH=firmware-hatch-12672.B TEST=Verify MKBP events wake system TEST=Verify MKBP IRQs are run Change-Id: I8420a996cb1975007cbbbefe9e2f8f1fca91b666 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com>
2020-04-24	mb/google/hatch: Make Kconfig LAPTOP knob transitively select	Edward O'Callaghan
	BUG=b:154071868 BRANCH=none TEST=builds Change-Id: I9c602476a80a97438af01e3c48fac385532373a4 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-24	mb/google/hatch: Add Duffy variant specific DPTF parameters	Edward O'Callaghan
	Copy over DPTF parameters from Puff. BUG=b:153589525 BRANCH=none TEST=none Change-Id: Ic619826205be06f30055fbbc537f3d302dd039bd Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40423 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-24	mb/google/hatch: Add Kaisa variant specific DPTF parameters	Edward O'Callaghan
	Copy over DPTF parameters from Puff. BUG=b:153589525 BRANCH=none TEST=none Change-Id: I7270db1283a9c0ee4746da038020e432aeb6dc5e Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40422 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-23	mb/google/nyan*: Always add RTC driver	Patrick Georgi
	The device is always there, the Chromium OS configs always enable it, so let's mirror that here for a better out of the box experience. Change-Id: Ia2073ee7ecbdb37473e1f1002bc9ae0f7df58e42 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40657 Reviewed-by: Michael Niewöhner Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-23	mb/google/smaug: Always add RTC driver	Patrick Georgi
	The device is always there, the Chromium OS config always enables it, so let's mirror that here for a better out of the box experience. Change-Id: Ic43a314aaed635ae2943df02abc5d163cc3c4ffd Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40658 Reviewed-by: Michael Niewöhner Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-23	src/mainboard: Const'ify pci_devfn_t devices	Elyes HAOUAS
	Change-Id: I5bb1a819475383719dbda32d9b5fea63da1e6713 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-23	mb/google/puff: Switch USB2 port1 and port3	Tim Chen
	Switch USB2 port1 and port3 for duffy and kaisa due to circuit change. BUG=b:153682207, b:154451230, b:154445635 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage boot on puff board Change-Id: I9c0cbcbefd045085fb70cf4f41869ab9b98103c4 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-04-23	rules.h: Rename ENV_VERSTAGE to ENV_SEPARATE_VERSTAGE	Julius Werner
	When CONFIG_SEPARATE_VERSTAGE=n, all verstage code gets linked into the appropriate calling stage (bootblock or romstage). This means that ENV_VERSTAGE is actually 0, and instead ENV_BOOTBLOCK or ENV_ROMSTAGE are 1. This keeps tripping up people who are just trying to write a simple "are we in verstage (i.e. wherever the vboot init logic runs)" check, e.g. for TPM init functions which may run in "verstage" or ramstage depending on whether vboot is enabled. Those checks will not work as intended for CONFIG_SEPARATE_VERSTAGE=n. This patch renames ENV_VERSTAGE to ENV_SEPARATE_VERSTAGE to try to clarify that this macro can really only be used to check whether code is running in a separate verstage, and clue people in that they may need to cover the linked-in verstage case as well. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2ff3a3c3513b3db44b3cff3d93398330cd3632ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/40582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-04-23	Puff: Enable VBOOT_EARLY_EC_SYNC	Daisuke Nojiri
	Romstage is now where software sync is performed for chromebooks. EFS2 has been ported to romstage from Depthcharge. Puff should follow. This patch enables CONFIG_EARLY_EC_SYNC and disables CONFIG_VBOOT_EC_EFS. EFS2 will be done in romstage. BUG=b:147298634, chromium:1045217 BRANCH=none TEST=Verify software sync succeeds on Puff. Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I8d7c25f8281496c7adb282f5d4e0fc192d746e3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40390 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-22	mb/google/kukui: kakadu: update the EDID and sequence	Scott Chao
	The EDID and command sequence are from BOE, the vendor. BUG=b:148997748 TEST=Boots on Chromebook Kakadu and displayed developer firmware screen successfully. Change-Id: Ieb510cb28882afc5b8023c2a57b31187e4a09fbd Signed-off-by: Scott Chao <scott.chao@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40396 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-22	mb/google/puff: comment schematics changes for USB	Kangheui Won
	USB routing has changed on reference schematics after Puff rev1 has built. This may confuse people trying to c&p devicetree from the Puff. So add comment to clearly note that there was change, hopefully preventing c&p errors. BUG=b:153682207 BRANCH=None TEST=None Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I5c43a5c04c81b6708c9eeabc48ef11961d7c8561 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40546 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-22	mb/google/deltaur: Correct SPD SMBus address	Eric Lai
	SMBus uses 7-bits address, change it from 8-bits to 7-bits. BUG=b:151702387 TEST=Check Memory SPD data is correct in console log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I1720b4d6aa0bc785ad86234b3523bb0676ec5c82 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-22	mb/google/deltaur: Remove GbE FMAP region	Tim Wawrzynczak
	Deltan will be using the integrated Intel GbE for LAN functionality. Deltaur will not have a LAN port, and so does not need the GbE region. This patch adds a new FMAP descriptor file which explicitly supports the GbE region (chromeos-gbe.fmd), and removes the GbE region from chromeos.fmd. Deltan is then assigned chromeos-gbe.fmd, and Deltaur is assigned chromeos.fmd. BUG=b:150165131 TEST=emerge-deltaur coreboot chromeos-bootimage and use ifdtool -p tgl -t image-delta{ur,n}.bin to make sure FMAP aligns with IFWI Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib93d5ba7f8dbf273ba7c1163022661ede1f44ab4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40501 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-22	nb/intel/haswell: Deprecate WDB params in pei_data	Angel Pons
	The WDB (Write Data Buffer) is a data region in CAR, used as a scratchpad in the read and write training algorithms of memory initialization. Both SNB and IVB use this buffer, but HSW does not. Unlike earlier chipsets, Haswell contains much more in-hardware memory training machinery, known as REUT (Robust Electrical Unified Testing). Among other changes, the REUT hardware has a pattern storage buffer, which renders the need for a pattern storage buffer in CAR obsolete. Deprecate the WDB-related parameters in the pei_data structure for Haswell, as they are leftovers from the previous generation's MRC. Remove them from the mainboards, and explain why they are not required. Because the MRC ABI has to remain the same, the layout of pei_data must not be changed, so rename the WDB parameters instead of deleting them. Tested on Asrock B85M Pro4, still boots with the MRC from Google Wolf. Change-Id: I7acc9353a22f8c6f9fe6407617162f35849a79dd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-04-21	mb/google/puff: configure USB PLD groups	Peter Marheine
	Each physical port should have the same group and position for both USB2 and USB3, but puff and its variants use different layout than the baseboard so they must override PLD. Ports are split into two groups for front and back, with positions in each group numbered from left to right. BUG=b:151579409 BRANCH=none TEST=PLD_GroupToken and PLD_GroupPosition are set as expected in SSDT. Change-Id: Ibe19e4faa1fbc7117687d789e9bd5584852a48c0 Signed-off-by: Peter Marheine <pmarheine@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20	security/vboot, mb/google: Fix build errors	Patrick Georgi
	There have been two cases of incompatibilities between overlapping changes, and they need to be resolved in a single commit to unbreak the tree: 1. CB:40389 introduced a new use of write_secdata while CB:40359 removed that function in favor of safe_write. Follow the refactor of the latter in the code introduced by the former. 2. CB:39849 changed google_chromeec_get_usb_pd_power_info()'s interface and adapted all its users. Except for duffy and kaisa which were only added in CB:40223 and CB:40393 respectively, so reapply the patch to puff's mainboard.c to their mainboard.c files. Change-Id: Ib8dfcd61bb79e0a487eaa60e719bd93561f2d97a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2020-04-20	mb/google/hatch/vr/puff: Add psys_pmax calculation	Gaggery Tsai
	This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: I8ea01f856411e05a533489280fc2b4a46a1440c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-20	mb/google/deltaur: Add memory topology SODIMM and MEMORYDOWN	Eric Lai
	Update memory topology for spd info. Deltan supports SODIMM and Deltaur supports MEMORYDOWN. BUG=b:151702387 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If314894325d6f222807030a36f8c4cefecfe5bd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-20	google/chromeec: Revise parameters of EC USB PD API call	Gaggery Tsai
	This patch adds voltage and curent parameters in google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could use the voltage and current information to calculate charger power rating. The reason for this change is, some applications need the voltage information to calculate correct system power eg PsysPmax. BUG=b:151972149 TEST=emerge-puff coreboot; emerge-fizz coreboot Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-20	soc/intel/tigerlake: Update iDisp Link UPD settings	Srinidhi N Kaushik
	Remove explicit setting of iDisp Link parameters. These settings are related to configuration for the link between HD-Audio controller and Display unit for purposes of HDMI/DP Audio playback. During PO, observed that without setting these params display part was not binding. With the latest code verified that we dont need to explicitly set these parameters anymore. HDMI/DP audio playback works fine with default settings. BUG=b:151451125 BRANCH:none TEST= build and boot volteer/ripto and verify HDMI/DP audio playback Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie003d119918d363e2ff9172936b70416fd73c7f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40263 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jairaj Arava <jairaj.arava@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20	mb/google/deltaur: Correct H1 I2C gpio pin setting	Eric Lai
	H1 uses I2C3 in the HW schematics and connects to GPP_H6 and GPP_H7. Previous setting was wrong so correct it. BUG=b:150165131 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I43c18baea66b927d51689579a40a53f72b94ef36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40487 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20	mb/google/volteer: add ec device entry to devicetree	Nick Vaccaro
	BUG=b:154279851 TEST=none Change-Id: Ibb56d97d5180ab199c52119135f7eff265908667 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-20	mb/google/dedede: Disable dynamic clock gating for cr50's GPIO	Ian Feng
	Disable dynamic clock gating for the community cr50's IRQ lives on. That IRQ is pulsed very quickly, and with clock gating enabled pulses tend to be missed. This is expecially true on the default 0.0.22 firmware that cr50 comes with out of the factory. BUG=b:154178408 b:154293730 BRANCH=None TEST=build waddledoo successful and Linux has no TPM IRQ timeout error. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2b1b3ee59ebf6adce0653e7550b457e02d3c87df Reviewed-on: https://review.coreboot.org/c/coreboot/+/40480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-20	mb/google/dedede: Read DRAM population strap	Karthikeyan Ramasubramanian
	Configure DRAM population strap GPIO according to the schematics. Configure an internal pull-up to support the boards in which the strap is not populated. Read the strap and pass that information to FSP for memory initialization. BUG=b:152275658, b:154301008 TEST=Build and boot the mainboard. Ensure that the strap information is read as expected and passed to FSP. Change-Id: I69583f35ffc219bae9ce06bd4ba9898ed0d4d21d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39812 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20	mb/google/volteer: Update devicetree based on EDS	Wonkyu Kim
	Update device enable/disable based on PCH EDS#576591 vol1 rev1.2 BRANCH=none BUG=b:154037185 TEST= boot up OS in volteer and check and check lspci Unsupported IP should be visable from lspci result Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I61a328da1014ab7584c3ec789971a106c7a0a403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40394 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20	mb/google/dedede: remove samsung-K4U6E3S4AA-MGCL.spd.hex	Marco Chen
	The samsung-K4U6E3S4AA-MGCL.spd.hex is not used and planed by anyone yet. On the other hand, the spd content is not correct based on JSL spec as well. BUG=b:153426401 TEST=build waddledoo and waddledee successfully. Change-Id: If71e3ef2e3385378633549bf8709a1cd6ecc0dd3 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-04-20	mb/google/deltaur: Enable Cirque touchpad for Deltan	Eric Lai
	Reference Arcada to add device tree for Cirque touchpad. BUG=b:152931802 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia354702c8054b5826d45896f7bff268335726028 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-20	mb/google/drallion: Increase Melfas touchscreen stop delay to 115ms	John Su
	Modify stop_delay as 115ms to waiting for Melfas device I2C interface ready after touch fw auto update and rebind driver. BUG=b:153708773 BRANCH=drallion Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ib392190d2b4188ee228d8ca4873e03176d2f127f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40357 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Mathew King <mathewk@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-16	mb/google/hatch/var/kindred: Override VBT selection for kled	David Wu
	Override VBT to fix CRC error issue with psr2 panel for kled. Cq-Depend: chrome-internal:2877637 BUG=b:145963505 BRANCH=hatch TEST=FW_NAME=kindred emerge-hatch coreboot chromeos-bootimage Change-Id: If201d449e910f80dc514c142aec4808a44fa31a9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-04-16	mb/google/puff: Add variant specific DPTF parameters	Tim Chen
	Modify DPTF parameters for OEM EVT build from thermal team. BUG=b:153589525 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage and boot on puff board Change-Id: I36db172e4d2ccc854856641c510cff9fe04ea235 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40282 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-15	mb/google/hatch: Add Kaisa variant	Andrew McRae
	A verbatim copy of variants/puff V.2: rebased on duffy. BUG=b:152951180 BRANCH=none TEST=none Change-Id: I7ea28e96c8b6867e17097a8bfab848928195654d Signed-off-by: Andrew McRae <amcrae@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2020-04-15	mb/google/hatch: Add Duffy variant	Edward O'Callaghan
	A verbatim copy of variants/puff. BUG=b:152951181 BRANCH=none TEST=none Change-Id: I9ac262bba60a8d0059722e947ed1b47dddb94f55 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40223 Reviewed-by: Daniel Kurtz <djkurtz@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-15	trogdor: add support for Bubs variant	T Michael Turney
	Change-Id: I4d9bc98863c4f33c19e295b642f48c51921ed984 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37069 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-15	mb/google/puff: Fix up WLAN_OFF gpio configuration	Edward O'Callaghan
	BUG=b:152927525 BRANCH=none TEST=builds Change-Id: I691377624c870eb0fc6f7e84a4b9cd50b7b09654 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-by: Daniel Kurtz <djkurtz@google.com>
2020-04-15	mainboard/puff: Tune ALC5682I rise_fall times on i2c	Edward O'Callaghan
	Tunes the headphone amp i2c with measured signal shape. BUG=b:147192377 BRANCH=none TEST=builds and measured i2c frequency below 400khz Change-Id: I60f73bcf60ed140f595c953be371b982a63f7b95 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38459 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-14	trogdor: Add third RAM_CODE pin	Julius Werner
	We decided to add a third RAM_CODE pin to the Trogdor family for devices after rev1. This patch adds support to read it. Since the newly used pin was previously unconnected (not pulled down) on rev1, this will change the RAM_CODE result for previous versions (and actually make it undetermined until we enable tri-state). But since we're not actually using RAM_CODE for anything yet, and since those are development revisions that will eventually be discontinued, this should be fine. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I9b52982f17646a305b1a3e2c7d37606a7c38d0c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com>