summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2024-09-27mb/google/fatcat/var/fatcat: add support for wifi sar tableYH Lin
Add wifi sar table support for fatcat. Bit 4-5 in CBI/FW_CONFIG is used to select different sar table (index 0 to 3). BUG=b:348678529 TEST=emerge-fatcat coreboot chromeos-bootimage Change-Id: I2d82f76d7c11378ee5c221a6b9621b4cba83720d Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-09-27mb/google/brya: enable config DRIVER_INTEL_ISH_HAS_MAIN_FW for truloJayvik Desai
Trulo ISH uses the MAIN FW loaded by the kernel driver. This commit enables DRIVER_INTEL_ISH_HAS_MAIN_FW for trulo, which skips printing the ISH BUP version. BUG=b:360144613 TEST=Local build successful and tested on trulo by toggling the config. enabling this config skips printing the ISH version in cbmem. 1. CONFIG enabled ``` trulo-rev1 ~ # cbmem -c | grep ISH [INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin ``` 2. CONFIG disabled ``` trulo-rev1 ~ # cbmem -c | grep ISH [DEBUG] ISH version: 5.4.2.36864 [INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin ``` Change-Id: Ifebd563ec8ddb0378e1215a90396687857f3f71d Signed-off-by: Jayvik Desai <jayvik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84494 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-27mb/google/fatcat/var/fatcat: Add initial FW_CONFIGSubrata Banik
BUG=b:348678529 TEST=Able to build google/fatcat. Change-Id: I5c90aac4873dcc57e65e641656dca3a96f84d6b8 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84543 Reviewed-by: Pranava Y N <pranavayn@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-26mb/google/{nissa,trulo}: Add Vccin Aux Imon Iccmax default valueSimon Yang
Add default value in nissa and trulo devicetree.cb, ODM have to review the board design to follow RDC#646929 Power Map requirement. NOTE: The VccInAuxImonIccImax remains unchanged w/ and w/o this CL. BUG=b:330117043 BRANCH=firmware-nissa-15217.B TEST='emerge-nissa coreboot chromeos-bootimage' Change-Id: Iaedd34757aa6802edcae402e751bc39b9cfe9e0c Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83725 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brox/var/lotso: Add RTS522A vdd ctrl by GPP_A17Jian Tong
For next DVT build, hw adds this power ctrl. BUG=b:359409425 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: Id256b3a94d3c8ed6f6832d63ecc74c2438c7d15a Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84254 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brox/var/lotso: Update cpu power limitsJian Tong
When battery not present, increase PL4 limit from 9 to 40. Get PL setting from internal thermal and power team. AC+DC/DC: PL1=15W PL2=25W PL4=114W AC ONLY: PL1=15W PL2=25W PL4=40W BUG=b:355094551 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Confirm on lotso EVT board, as expected. Change-Id: I5848c776399a1bdc455db604bb3b22d16f6b2928 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84202 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brox/var/lotso: Generate RAM ID for H58G56BK7BX068Jian Tong
BUG=b:342929824 BRANCH=None TEST=boot to kernel success Change-Id: Ibc13137488948ec6cea1904b3964ffed4ff7ea7d Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84499 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/fatcat: Add HDA verb tablesJeremy Compostella
We use ALC256 as HDA codec on fatcat hence, added the verb table. BUG=b:348678529 TEST=Tested audio playback using HDA ALC256 codec on PTL reference board Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d55 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84409 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/fatcat: Add memory settingsJeremy Compostella
BUG=b:348678529 TEST=Memory training is successful on google fatcat board Change-Id: I914f73ff06bfb801fc319b45b23d7ce4cb7a6d51 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84406 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-25mainboard/google/fatcat: Update SoC to Panther LakeSubrata Banik
This commit updates the fatcat mainboard to use the Panther Lake SoC instead of Meteor Lake. The changes include: - Selecting the `SOC_INTEL_PANTHERLAKE_U_H` config option. - Updating the `mainboard_update_soc_chip_config()` function to use the `soc_intel_pantherlake_config` struct. - Updating the devicetree to use the `soc/intel/pantherlake` chip. - Updating variant header files to reflect the SoC change. This update enables support for the Panther Lake SoC and its features on the fatcat mainboard. BUG=b:347669091 TEST=Able to build google/fatcat. Change-Id: Ie0c6257dfb9dd1f627472ad220614f9b24c911ef Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84537 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mainboard/google/fatcat: Remove unused virtual GPIOsSubrata Banik
This commit removes the virtual GPIOs for recovery and write protection from the fatcat variant. These GPIOs are not utilized on the fatcat platform, and their removal simplifies the GPIO configuration and improves code readability. The `CROS_GPIO_DEVICE_NAME` macro is no longer applicable for Panther Lake SoCs. Future changes will introduce a suitable GPIO device name that meets the requirements of Panther Lake. BUG=b:347669091 TEST=Able to build google/fatcat. Change-Id: I492fec28637edb2f84e9290b28dabce3f23aa867 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84536 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brya: Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for vellSubrata Banik
Enable the SOC_INTEL_COMMON_BASECODE_RAMTOP Kconfig option for the google/vell mainboard. This option ensures improving the boot time on google/vell by 40ms in an average. BUG=b:352330495 TEST=Able to reduced google/vell boot time by 40ms. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iedfd346c62b1ac79796042dd3569d846007b8f10 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-24mb/google/rex/{deku,karis}: Enable RTD3 for SSDCurtis Chen
Deku S0ix is blocked by the SSD. Enable RTD3 for the SSD to unblock S0ix. RTD3 for SSDs has already been enabled on Rex and Screebo, too. To prevent this S0ix blocking issue, RTD3 should also be enabled for Karis. BUG=361011799 TEST=Run suspend_stress_test and check whether DUT can enter S0iX. suspend_stress_test w/o this CL (with Phison PCIE Gen4 SSD PSENN256GA87FC0) Suspend failed, s0ix count did not increment from 19182060 Substate Residency S0i2.0 0 S0i2.1 0 S0i2.2 0 And PC10 residency is only 60% (by SoCWatch) suspend_stress_test w/ this CL (with Phison PCIE Gen4 SSD PSENN256GA87FC0) Substate Residency S0i2.0 0 S0i2.1 19186 S0i2.2 3389654 And PC10 residency is ~90% (by SoCWatch) Change-Id: Iaded43a84ad1e245106d36a9d4aa83c40b046649 Signed-off-by: Curtis Chen <curtis.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84452 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-24mb/google/brya/var/vell: select SOC_INTEL_RAPTORLAKESubrata Banik
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers for FSP as vell is using a converged firmware image. This effort also helps to save vell boot time by 80-100ms as RPL FSP is better optimized. Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which saves 10ms of the boot time. BUG=b:352330495 TEST=Able to build and boot google/vell. warm reboot time w/o this CL ``` Total Time: 1,408,669 ``` warm reboot time w/ this CL ``` Total Time: 1,235,651 ``` Change-Id: I8f7dd76f00cfeff2908aeb805524706ac23403fa Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84491 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-24mb/google/brya/var/vell: Disable I2C6 controllerSubrata Banik
This patch disables unused I2C6 controller for the 'vell' variant of the 'brya' mainboard. BUG=b:352330495 TEST=Able to build and boot google/vell. Change-Id: I5b39e44bb64bf2285c962249c0d94a8d5325f0c7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-23mb/google/rex: Create kanix variantTyler Wang
Create the kanix variant of the rex0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:368501705 TEST=util/abuild/abuild -p none -t google/rex -x -a make sure the build includes GOOGLE_KANIX Change-Id: Id74a084ed3cebb65625166e3098f43e41a63f5f9 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84432 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-23mb/google/nissa/var/nivviks: Update the power resource for NVM and VCMSowmya V
Earlier change (https://review.coreboot.org/c/coreboot/+/84019) pushed to resolve the privacy LED blinking issue regressed the camera autofocus functionality. This change updates the power resource for NVM and VCM in line with the tivviks schematics to fix the issue. BUG=b:365899407 TEST=Build and boot tivviks. Verified the Autofocus and all the camera basic sanity tests. Change-Id: Id3e256d59982ac176844e289f18ee450079704b9 Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2024-09-23mb/google/corsola: Distinguish MT8186T's SKU ID from MT8186Yang Wu
Compared to MT8186, MT8186T requires initializing the PMIC MT6319 in the DTS file, which necessitates using different SKU ID to distinguish between the MT8186 and MT8186T. For MT8186, factory pre-flashed 0x7fffffff as unprovisioned SKU ID and kernel can use the corresponding DTS file. To make MT8186T functional on unprovisioned devices, change the SKU ID to 0x7ffffeff, so that the correct DTS file will be selected by the payload. BUG=b:365730137 TEST=1. Pre-flashed 0x7fffffff and boot OS. 2. Check OS boot normally by 0x7ffffeff. BRANCH=corsola Change-Id: I91306d3abd508e104851916882fb36a4fd302036 Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84342 Reviewed-by: Knox Chiou <knoxchiou@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-09-23mb/google/fatcat: Update Flash Map layoutSubrata Banik
This patch updates the fatcat flash map layout to accommodate the growth in Panther Lake IFWI blobs over Meteor Lake. Release FMD: SI_ALL: 8MB -> 9MB SI_BIOS: 24MB -> 23MB RW_UNUSED: 4MB -> 3MB Debug FMD: SI_ALL: 8MB -> 9MB SI_BIOS: 24MB -> 23MB RW_UNUSED: 3MB -> 2MB TEST=Able to build google/fatcat inside chroot. Change-Id: I8febb4df5d3b3eb07ebff8e56a1ce2dfd2f52e7d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-09-20mb/google/dedede/var/beadrix: Add LTE only daughterboard supportKevin Yang
Due to beadrix DB has C1 port before, and add FW_CONFIG without C1 port for LTE sku. BUG=b:364431483 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot chromeos-bootimage Set fw config to DB_PORTS_LTE and check 1.fw_config match found: DB_PORTS=DB_PORTS_LTE <= show LTE present message 2.USB3 port 3: enabled 1 <= LTE port enable Change-Id: Ica5a2d6e19421b132a0bdbad77806a17e2c1ce69 Signed-off-by: Kevin Yang <kevin.yang@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84232 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-19mb/google/brox: Remove psys related implementationSowmya Aralguppe
psys is not an optimal solution for no/low battery boot. Hence remove function and macros related to psys implementation. BUG=b:335046538 BRANCH=None TEST=Build and boot on brox board Change-Id: I6c0e9561367b5846b00be27012f002dd7c299414 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84397 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-19mb/google/nissa/var/riven: enable WIFI SARDavid Wu
According to the CL:chrome-internal:7651905, Riven will use the fw_config to separate SAR setting. CNVI + ID_0 --> wifi_sar_0.hex for WIFI6 PCIE + ID_1 --> wifi_sar_9.hex for WIFI7 BUG=b:366060274 TEST=build, enabled iwlwifi debug, and check dmesg as below. iwl_sar_fill_table Chain[0]: iwl_sar_fill_table Band[0] = 132 * .125dBm iwl_sar_fill_table Band[1] = 136 * .125dBm iwl_sar_fill_table Band[2] = 136 * .125dBm iwl_sar_fill_table Band[3] = 136 * .125dBm iwl_sar_fill_table Band[4] = 136 * .125dBm iwl_sar_fill_table Band[5] = 144 * .125dBm iwl_sar_fill_table Band[6] = 144 * .125dBm iwl_sar_fill_table Band[7] = 144 * .125dBm iwl_sar_fill_table Band[8] = 144 * .125dBm iwl_sar_fill_table Band[9] = 144 * .125dBm iwl_sar_fill_table Band[10] = 144 * .125dBm iwl_sar_fill_table Chain[1]: iwl_sar_fill_table Band[0] = 132 * .125dBm iwl_sar_fill_table Band[1] = 136 * .125dBm iwl_sar_fill_table Band[2] = 136 * .125dBm iwl_sar_fill_table Band[3] = 136 * .125dBm iwl_sar_fill_table Band[4] = 136 * .125dBm iwl_sar_fill_table Band[5] = 144 * .125dBm iwl_sar_fill_table Band[6] = 144 * .125dBm iwl_sar_fill_table Band[7] = 144 * .125dBm iwl_sar_fill_table Band[8] = 144 * .125dBm iwl_sar_fill_table Band[9] = 144 * .125dBm iwl_sar_fill_table Band[10] = 144 * .125dBm Cq-Depend: chrome-internal:7651905 Change-Id: I647d64a008991a7a20791b2c87ea6308af6bb82e Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84339 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-18mb/google/brox: Switch USB-C port locationsJameson Thies
The ordering of the USB-C port locations is swapped. When facing the left panel, the correct ordering is port 1 (left) then port 0 (right). Swap the positions of the two USB-C ports to their correct values. BUG=b:349822718 TEST=Booted to OS, confirmed correct physical_location at /sys/class/typec. Change-Id: I98e3042c64aba885b602c99916734c2dbb9d66bd Signed-off-by: Jameson Thies <jthies@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84403 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-17mainboard/google/{brox,brya}: Drop redundant CRASHLOG configSubrata Banik
This commit drops redundant CRASHLOG option for the brox and brya mainboards as SOC_INTEL_CRASHLOG config is now selected by the Alder Lake SoC directly. TEST=Able to build and boot google/brox w/o any functional impact of the crashlog feature. Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-17mb/google/brya/var/trulo: Update ISH GPIO config for tablet mode switchVarun Upadhyay
This patch configures the GPIO pins for ISH to notify EC about the tablet mode change in accordance with schematic_20240607. BUG=b:347811875 TEST=Build and boot google/trulo. Placed the device in tabletmode & on EC console,"tabletmode" command shows "tablet mode". Change-Id: Id22e397e46b522428ffdabe34a445ed7e4fb6fc5 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-17mb/google/brya: Drop redundant entries of crashlog configSubrata Banik
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG) entry from BOARD_GOOGLE_BRYA0 and BOARD_GOOGLE_BRASK. BOARD_GOOGLE_BRYA_COMMON already selects a crashlog config, and brya0/brask board eventually selects the BOARD_GOOGLE_BRYA_COMMON config, making SOC_INTEL_CRASHLOG redundant. TEST=Successfully built and booted google/brya0. Change-Id: Iaff7954d4dafb4c6ca72a1521dfb434fb36b495a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84364 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-17mb/google/brox: Drop redundant entries of crashlog configSubrata Banik
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG) entry from BOARD_GOOGLE_BASEBOARD_BROX. BOARD_GOOGLE_BROX_COMMON already selects a crashlog config, and brox baseboard eventually selects the BOARD_GOOGLE_BROX_COMMON config, making SOC_INTEL_CRASHLOG redundant. TEST=Successfully built and booted google/brox. Change-Id: Idcb03d13ee3943f188246663d47f47cb8afccbd9 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84363 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-16mb/google/volteer: Fix USB port definitionsMatt DeVillier
Commit bc8f5405b542 ("tgl mainboards: Move usb{2,3}_ports settings into XHCI device scope") not only moved the USB port definitions under the XHCI device reference, but also combined multiple register definitions. In doing so, it broke the inheritance from the baseboard, since the variant overridetree registers now replaced the entire usb2_ports/ usb3_ports structs, rather than replacing individual array elements therein. This resulted in any USB ports inherited from the baseboard and not overridden by the variant being non-functional as they were not included in the resulting combined devicetree. To fix this, return to overriding individual array elements in the usb2/3_ports structs. TEST=build/boot google/drobit. Verify all USB ports present and functional. Verify mainboard/static.c in built shows all ports. Change-Id: I54921fa4ecf594a1ecbcfa7c45e5d745d4a95652 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84348 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-09-16mb/google/brox/jubilant: Update cpu power limit settingsRen Kuo
1)Modify jubilant cpu power limit setting depend on the brox baseboad settgins,refer to CL: https://review.coreboot.org/c/coreboot/+/83752 2)Update PL1,PL2, and PL4 value from jubilant thermal design PL1 = 15W PL2 = 41W PL4 = 87W BUG=b:364441688 BRANCH=None TEST=Able to successfully boot on jubilant photo SKU1 and SKU2 boards with AC w/o battery. Test on AC 65W and 45W w/o battery,and check the PL values. Change-Id: I9a143d9faaa6c57b0d314c0ff6c0e55f556d7216 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
2024-09-13mb/google/brox: Fix booting to kernel without batterySowmya Aralguppe
When battery is disconnected and only adaptor is connected higher PL2 power draw causes cpu brown out and system does not boot to kernel. To avoid this set Boot frequency UPD to 1. Reduce PL4 value to overcome power spikes from SoC during boot. Remove Psys implementation as it impacts active state platform performance. BUG=b:335046538,b:329722827 BRANCH=None TEST=Able to successfully boot on 3 different Brox proto2 SKU1 and SKU2 boards with 65W, 45W and 30W adaptors for 3 iterations of cold boot. Change-Id: I58e136c607ea9290ecac0cee453d6632760a6433 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-13mb/google/brask/var/bujia: Fix PSYS voltage settingShon
It return 0 when google_chromeec_command() on success, so get_input_power_voltage() should return adaptor voltage instead of psys_config default value. BUG=b:329037849 BRANCH=firmware-brya-14505.B TEST= cbmem -c | grep -i PsysPmax Change-Id: I848c92752b7a7b53f47c6296aad0bdda20e9b0bd Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84333 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-12mb/google/brox: Set PCIE WLAN bluetooth companion deviceKarthikeyan Ramasubramanian
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:362672785 TEST=Build Brox firmware and boot to OS. Ensure that the BRDS table is populated under the right ACPI device scope. Scope (\_SB.PCI0.XHCI.RHUB.HS10) { Name (BRDS, Package (0x02) { 0x00000001, Package (0x0A) { 0x00000012, 0x00000001, 0x00000001, 0x7C, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70 } }) } Change-Id: I9a74a995bca8d412b85c243c7f2f98c9917b5e76 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84296 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com>
2024-09-12mb/google/brox/var/brox: Enable ASPM for PCIe4 SSD of CPUKarthikeyan Ramasubramanian
Check that lnkCap supports ASPM L1, so set it to ASPM_L1 to avoid excessive power consumption. BUG=b:363854853 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I386f8e88a5af661b1f4c04d2e2a34cd181608bd8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: <srinivas.kulkarni@intel.com>
2024-09-12soc/mediatek: Remove redundant struct pad_func and PAD_* definitionsYidi Lin
Clean up redundant `struct pad_func` and `PAD_*` definitions. This patch also refactors the PAD_* macros by, - Repurposing PAD_FUNC and dropping PAD_FUNC_SEL. - Adding PAD_FUNC_DOWN and PAD_FUNC_UP to avoid the implicit initialization. BUG=none TEST=emerge-{elm, kukui, asurada, cherry, corsola, geralt, rauru} coreboot Change-Id: I12b8f6749015bff52988208a7c3aa01e952612c6 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84222 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-12mb/google/brox/variants/brox: remove PL4 value modificationSumeet Pawnikar
Remove PL4 value modification based on PsysPL3 value. BUG=None BRANCH=None TEST=Built and boot on brox system Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: Ic7fbc6386769aa9f76a8665a742c97dfd790fd1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/83662 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-11mb/google/brox/var/lotso: Update verb tableJian Tong
Correct the number of NID entries. BUG=b:349996984 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I5f5553a5d8014f957d6b89ac4c1039594817bf32 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84184 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-11mb/google/brox/var/jubilant: Enable ASPM for PCIe4 SSD of CPURen Kuo
Enable ASPM of CPU PCIe4 for SSD to improve power consumption. BUG=b:364441213 BRANCH=None TEST="sh -c 'lspci -vvnn || lspci -nn'" 01:00.0 Non-Volatile memory controller LnkCtl: ASPM L1 Enabled Change-Id: I4380bb8748f2847b1824e20edb19578c7aedfe4f Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-10tree: Use boolean for lpss_s0ix_enableElyes Haouas
lpss_s0ix_enable is already defined as boolean: `git grep lpss_s0ix_enable $(find -type f -name "*.h") src/soc/intel/apollolake/chip.h: bool lpss_s0ix_enable;` Change-Id: I34bd568defe202daaad6136b9c184bc292a226b3 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-09-10mb/google/brox/var/lotso: Enable ASPM for PCIe4 SSD of CPUWentao Qin
Check that lnkCap supports ASPM L1, so set it to ASPM_L1 to avoid excessive power consumption. BUG=b:364484621, b:361828368 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage w/o this CL - ``` lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl" LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ``` w/ this CL - ``` lspci -vv | grep -A30 "KIOXIA" | grep -E "LnkCap|LnkCtl" LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us LnkCtl: ASPM L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ``` Change-Id: I8a7f69bb82ad24b29566541d7694f87f9c6458d6 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84241 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-10mb/google/nissa/var/teliks: Update eMMC DLL tuning valueszengqinghong
Update eMMC DLL tuning values for improved initialization reliability. BUG=b:361013271 TEST=Cold reboot stress test over 2500 cycles Change-Id: Icd1f9c7bdec2bc99152a13ac4ce0724a26718a52 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84248 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-10mb/google/nissa/var/joxer: Use `DB_USB` to probe conn1 deviceSubrata Banik
Joxer experienced error messages during developer mode entry due to failed USB-C1 probing. This patch adds the `DB_USB DB_1C` probe directive to the `conn1` device in the overridetree, ensuring USB-C1 is only probed when `FW_CONFIG` supports the applicable hardware SKU. This should resolve the error flood seen during dev mode entry on Joxer. BUG=b:364240631 TEST=Able to build and boot google/joxer to OS without any error. w/o this patch: send_packet: CrosEC result code 9 send_packet: CrosEC result code 3 Failed to get PD_MUX_INFO port1 ret:-3 update_all_tcss_ports_states: port C1: get_usb_pd_mux_info failed send_packet: CrosEC result code 9 send_packet: CrosEC result code 3 Failed to get PD_MUX_INFO port1 ret:-3 w/ this patch: No error reported during dev mode entry Change-Id: I8cdefa01409d5a8a75032f30dacde40057e064dd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-09mb/google/zork: Add Kconfig to set IGD UMA allocation via APCBMatt DeVillier
Add a Kconfig choice to select the IGD UMA allocation, which selects a precompiled ACPB binary with the corresponding UMA value set. Default to the previous value (128MB) for non-ChromeOS builds, and 64MB for ChromeOS as that is the value used there. TEST=build/boot google/morphius, verify UMA size changes with selection via dxdiag tool under Windows. Change-Id: I6debd10527c33ce37ef3ada20955c8f7b7500039 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84237 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-08mb/google/kahlee: Add Kconfig to set IGD UMA allocationMatt DeVillier
Add a Kconfig choice to select the IGD UMA allocation. Default to the previous value (32MB). TEST=build/boot google/liara, verify UMA size changes with selection. Change-Id: Ia53d6d39d4f06c896ec13808234144b89da101f8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84235 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-07mb/google/dedede/var/awasuki: Update touchscreen power sequenceTongtong Pan
Reduce resume time. BUG=b:361728839 TEST=emerge-dedede coreboot chromeos-bootimage & test touchscreen function on awasuki DUT Change-Id: I32b2b1c709ecab964a0e449d416c5d0ee2c1d97d Signed-off-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84196 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-06mb/google/brask/var/bujia: Add PSYS settingShon
According to the Intel OPS spec, the DC power from display is 12~19V@8A max. It can't set PsysPmax by unknown voltage, so get voltage by ec command "ectool adcread 4" then calculate PsysPmax value. The OPS display can supply 90W power, configure psys_pl2 to limit the system power to 90W. BUG=b:329037849 BRANCH=firmware-brya-14505.B TEST= USE="fw_debug" LOCALES="en" emerge-brask chromeos-bmpblk intel-rplfsp intel-adlfsp coreboot chromeos-bootimage Check adcread value by ectool adcread 4. If get 19540, PsysPmax should be 19540 * 8000 ~= 156 W. Check FSP debug log have the following message. PsysPmax = 156W Change-Id: Ic6e9c6ce9f3179c7d63c1169695fbc23188456dd Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-09-06mb/google/nissa/var/yavilla: Add 1.2V enable pin in VCMWisley Chen
Add control for the 1.2V enable pin in VCM to comply the mipi camera power sequence. 2.8V enable --> 1.2V enable --> reset BUG=b:362386165 TEST=Run ITS test Change-Id: I495b2e266ee3d24ed3334bb9c173b3993d095e8e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84211 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-06mb/google/brox/var/lotso: remove unused cam enable_gpioJian Tong
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: Id8f30597ef9bceb9bdd4a3267266f1d189aa6fd8 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84198 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-06mb/google/brox/var/lotso: disable RTS5227 PCIE L0s supportJian Tong
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1. lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled. BUG=b:359409425 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-06mb/google/brox/variants/brox: Update PL1 MinSumeet Pawnikar
Update PL1 Min value from 6W to 15W based on the brox thermal cooling capacity and hardware design. BUG=None BRANCH=None TEST=Build and boot on brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-05mb/google/nissa/var/riven: Update GPIO pins for 3rd dmic supportDavid Wu
When world-facing camera is absent, coreboot need to enable GPP_R6(DMIC_WCAM_CLK) and GPP_R7(DMIC_WCAM_DATA) for 3rd dmic support BUG=b:333973512 TEST=Boot google/riven to OS and verify 3rd dmic working properly. Change-Id: I6c8780ce37b5d3987f5cdf6e6e6d0b4896b33230 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84141 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-05mb/google/brox/var/jubilant: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Jubilant FW image. Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095 Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-04mb/google/brox/jubilant: Tune I2C timingRen Kuo
Tune I2C2 timing: Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us" BUG=b:362685374 TEST= Build jubilant firmware Measure the i2c signal on jubilant to meet spec: I2C2 THIGH from 0.494 us to 0.76 us Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-04tree: Use boolean for emmc_enable_hs400_modeElyes Haouas
Change-Id: I41a877ed7f5f3d02904dc939b32996a7f6d45373 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_package_c_state_demotionElyes Haouas
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_c1_state_auto_demotionElyes Haouas
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for skip_ext_gfx_scanElyes Haouas
Change-Id: I569b9a69add341bcefe6bd5356b01a95a4e97286 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-09-03mb/google/brox/jubilant: Generate RAM IDsRen Kuo
Generate RAM IDs of lp5 memory: 1)Hyinx 4GB*4 H58G56BK8BX068 2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT BUG=None TEST=Run part_id_gen tool and check the generated files. Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-09-03mb/google/brox/jubilant: Modify FP IRQ pin to GPP_D13Ren Kuo
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT. The design change to follow the brox's GPE0 routing, and the FP wake source can be routed. BUG=b:363166664 TEST= Build jubilant firmware Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/cherry: Complete PCIe reset in romstageYidi Lin
De-assert PERST# at romstage to reduce the waiting time in ramstage. Before ``` [INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done, de-assert PERST# now [INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries) ``` After ``` [INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done, de-assert PERST# now [DEBUG] wait_perst_asserted: 457568 us elapsed since assert PERST# [DEBUG] wait_perst_done: 163413 us elapsed since de-assert PERST# [INFO ] mtk_pcie_domain_enable: PCIe link up success (1 tries) ``` BUG=none TEST=boot from NVMe Change-Id: I3a73bd574ae8f9f4e624846ce8b901a7d2209e78 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84118 Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-09-02mb/google/zork: Ensure eSPI GPIOs programmed w/o vbootMatt DeVillier
On the non-vboot boot path, eSPI is configured as part of fch_pre_init(), and we need to ensure that the mainboard sets the eSPI GPIOs properly before the common SoC code performs eSPI init. Use the mb_set_up_early_espi() function to set the eSPI GPIOs at the correct time. TEST=build/boot google/zork (morphius), verify keyboard functional. Change-Id: I03efe6def37a018c3de410523be21bf008174e94 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84148 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/zork: Ensure early GPIOs programmed w/o vbootMatt DeVillier
Now that zork can boot without vboot, ensure that the GPIOs set in verstage are programmed in bootblock on the non-vboot path. The eSPI GPIOs will be set in a subsequent patch using mb_set_up_early_espi() since setting them in bootblock_mainboard_early_init() would be too late given when the SoC eSPI init takes place. TEST=build/boot google/zork (morphius) w/o vboot Change-Id: I0bb49678b2d913c447d5bc761a6f0e00fca6334f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-09-02mb/google/nissa/var/teliks: Add fw_config fields for rtl8852becengjianeng
Add a new fw config field for wifi category as WIFI_6_8852, which is PCIe based. Also, enable WIFI_6_8852 for existing PCIe based wifi port as well as bluetooth port. BUG=b:356434907 BRANCH=NONE TEST=Verified Wifi6 module detection Change-Id: Ib6ba641c23cce7f1253022c9bb78b986b323bcaa Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84138 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/nissa/var/teliks: Force audio mute to avoid screen flickcengjianeng
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG=b:360243615 BRANCH=firmware-nissa-15217.B TEST:Verfied on Teliks and cannot reproduce the issue Change-Id: Iff488f6844c717ef24069c7176e7b8dfb07d8abc Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84137 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
2024-09-02mb/google/brox: Remove ACPI Power Resource for Bluetooth deviceKarthikeyan Ramasubramanian
Bluetooth driver in kernel requires reset-gpio in current resource settings (_CRS) and device specific data (_DSD) ACPI objects. Hence remove ACPI Power Resource for Bluetooth device so that the concerned ACPI objects get populated. BUG=b:362817900 TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and _DSP ACPI objects are filled in the SSDT with the required data. Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x004D } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "reset-gpio", Package (0x04) { \_SB.PCI0.XHCI.RHUB.HS10, Zero, Zero, One } } } }) Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-09-02mb/google/brox/jubilant: Update dptf settingsRen Kuo
Update dptf settings from thermal design: 1) Remove fan control and active policy, since fan is controlled by EC. 2) Modify TSRs to 0:DRAM, 1:SOC, 2:Charger 3) Update Pl2 min&max values BUG=None TEST= Build jubilant firmware Generate and check ACPI SSDT.dsl $ cat /sys/firmware/acpi/tables/SSDT > SSDT $ iasl -d SSDT Change-Id: I2d59eedea9fb25565709e118abc1a14b4c2a64e7 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-09-02mb/google/brya: Add romstage early graphics for trulo baseboardSubrata Banik
1) Add all required changes for eSOL support. 2) Select MAINBOARD_USE_EARLY_LIBGFXINIT for Trulo. The CSOT (MNC207QS1-1) panel is used for the devicetree. BUG=b:362895813 TEST=On-screen text message seen during MRC training on Trulo SKU1. MRC: no data in 'RW_MRC_CACHE' bootmode is set to: 0 DP PHY mode status not complete DP PHY mode status not complete DP PHY mode status not complete ... Informing user on-display of memory training Change-Id: Ic34a8601b3084aa5f780d358fb0b15b7e820d375 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84128 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
2024-09-02mb/google/brox/var/lotso: Update verb tableJian Tong
Update verb table provided by Realtek on 20240710. Restults: SNR > 90 (spec>=90). BUG=b:349996984 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: Ic4f03d09010efa7e32713b2697d5832255f64317 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83920 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-01tree: Use boolean for s0ix_enableElyes Haouas
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-08-29mb/google/rauru: Reset USB hub in bootblockYidi Lin
We have to reset the USB hub as early as possible. Otherwise the USB3 hub may not be usable in the payload. This design has been introduced since Cherry. TEST=build pass. BUG=b:317009620 Change-Id: Iea793b4b04bd009d0354e2331604bccf30466a23 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84024 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-29mb/google/rauru: Setup USB host in ramstageMingjin Ge
Add usb host function support. TEST=read usb data successfully. BUG=b:317009620 Signed-off-by: Mingjin Ge <mingjin.ge@mediatek.corp-partner.google.com> Change-Id: I5d081ff3e7367b87fab5ebdcb148c9005ab583f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-29mb/google/brya/var/nova: Configure scaler I2C GPIOsKenneth Chan
According to schematics, add GPP_H4/H5 configuration for scaler I2C pins (PCH_I2C_SCALER_SDA/SDL). BUG=b:358439747 TEST=emerge-constitution coreboot chromeos-bootimage. Build successfully and boot to verify I2C. Change-Id: Id831f594d6a57ed10867ae5ba05ae98c90ac7d9b Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84091 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-28mb/google/brox/var/lotso: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Lotso FW image. Change-Id: Ia170a6e006cb51e95fbaf3efe1106ca907165eca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84094 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-28mb/google/brox: Disable Thunderbolt deviceKarthikeyan Ramasubramanian
This feature is not required in Brox devices. Hence disable the concerned device. BUG=None TEST=Build Brox firmware and boot to OS. Ensure that the concerned device is disabled in the OS. Change-Id: I355852c780c552e6f9b2c28508f53580f392c1b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84093 Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
2024-08-28mb/google/nissa/var/anraggar: Force audio mute to avoid screen flickSimon Yang
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG:b=357764688 BRANCH=firmware-nissa-15217.B TEST:Verfied on Anraggar and cannot reproduce the issue Change-Id: I711dfd0803440e4b04f02849fed529c3872e023d Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28mb/google/nissa/var/nivviks: Prevent camera LED blinking during bootSowmya V
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. TEST=Build and boot nivviks. Monitor the camera LED blinking during boot. Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28tree: Use boolean for "eist_enable"Elyes Haouas
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
2024-08-27mainboard/google/rex: Remove HAVE_ACPI_RESUME for Intel Meteor LakeSubrata Banik
This patch removes the HAVE_ACPI_RESUME config option from the Google Rex mainboard configuration. The Intel Meteor Lake SoC does not support S3 (ACPI sleep state) entry/exit, and attempting S3 validation could lead to abnormal platform behavior. This change ensures that `_S3` is not listed as a valid wake source in the DSDT (Differentiated System Description Table) after booting to the OS. BUG=b:351025543 TEST=Booted google/rex successfully and verified that the `_S3` name variable is not present in the DSDT. Change-Id: I730ade628eea84c60ba003a0c871e729b0ee0a9f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84081 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-26nb/intel/haswell: Move SPD addresses to devicetreeKeith Hui
Introduce a sandybridge-style devicetree setting for SPD addresses, and use it instead of runtime code in mb_get_spd_map() for all haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all boards except google/slippy. Patch also covers recently added Z97 boards using Broadwell MRC. Also update util/autoport to match. abuild passes for all affected boards. autoport builds, but otherwise untested. Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-25Revert "mb/google/brya/var/xol: Change touchpad I2C interrupt type to GPIO_INT"Seunghwan Kim
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807. Reason for revert: We applied this patch for touchpad stuttering issue for XOl, but the same touchpad problem was reported. So we would revert this change and apply kernel patch (crrev/c/5808335) to avoid the touchpad issue. Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-24mb/google/rauru: Initialize flash controller in bootblockJarried Lin
Initialize SPI NOR Flash Controller (SNFC) in the bootblock. TEST=read nor flash data successfully. BUG=b:317009620 Change-Id: I88960ce7a50f67ea6f402884b714cb205836a6d8 Signed-off-by: Noah Shen <noah.shen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83924 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-24mb/google/skyrim: Combine the function port_descriptors for variantsZheng Bao
Remove the weak function. Combine all the getting descriptors together. BUG=b:279144932 TEST=Build Change-Id: I981e9c52c8e5fa32296e2e43be47411557133691 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83646 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-08-24mb/google/nissa/var/nivviks: enable WIFI_SARDavid Wu
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG for WIFI_CATEGORY to choose the right wifi_sar hex file. Below is the file mapping: wifi_sar_0.hex = wifi6 wifi_sar_1.hex = wifi7 BUG=b:345596420 TEST=emerge-nissa coreboot chromeos-bootimage Cq-Depend: chrome-internal:7607427 Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/dedede/var/awasuki: Modify DPTF parametersWei Hualin
Modify DPTF parameters from thermal team. 1. Add TCHG. 2. Modify the charging limit. BUG=b:360066326 TEST=Modify Thermal according to design requirements Change-Id: Ia7050b552656a70da0c992e4f54b02ccb6a7c114 Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83929 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar
2024-08-23mb/google/nissa/var/riven: Set VccIn Aux Imon IccMax to 25ADavid Wu
Iccmax of VccIn_Aux is 25A with MBVR design. BUG=b:348258637 TEST=Local build successfully and boot to OS normally. Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-08-23mb/google/nissa/var/sundance: Adjust GPIO GPP_C1 to no_pull-upRoger Wang
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table. BUG=b:358472598 TEST=Build and verified test result by EE team Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/nissa/var/nivviks: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: I0908ff500434401bf89a5313427cf304f32cf929 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2024-08-23mb/google/nissa/var/riven: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-22mb/google/brox/var/jubilant: Enable devices on unprovisioned fw_configRen Kuo
Add the condition of unprovisioned fw_config to enable all storages and devices. It's for first boot on all storags and preliminary test in factory when fw_config is unprovisioned. BUG=None TEST=Build jubilant firmware and boot to OS on storages when fw_config is unprovisioned and ensure all devices are enable. Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/brox: Enable storage devices on unprovisioned fw_configKarthikeyan Ramasubramanian
Storage devices are very critical to boot to OS. When probe list is defined for storage devices, all of them get disabled when fw_config is unprovisioned - a typical situation in the factory. Fix this by configuring the storage devices in device/override tree to probe and enable them when fw_config is unprovisioned. BUG=None TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned. Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/nissa/var/teliks: Adjust usb2 pin of wlanzengqinghong
Since the voltage value measured by the USB2 pin of the wlan is 500mv, it does not meet the design requirements. Adjusting the port length can reduce the voltage to 450mv, which meets the expected settings. BUG=b:361037189 TEST=1. The voltage measurements are as expected. 2. The Bluetooth and WiFi functions of the wlan module are verified to be normal. Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508 Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-08-22mb/google/volteer/var/drobit: Set UART GPIOs in bootblockMatt DeVillier
Enables early serial console for debugging. TEST=build/boot drobit, verify console output available starting in bootblock on CPU UART (/dev/ttyUSB1) vs ramstage. Change-Id: If94eb8caca3469143433fef06b972050f886be6a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-22mb/google/dedede: enable Intel CrashLogJędrzej Ciupis
Enable Intel CrashLog diagnostic feature by default on all Google Dedede variants. BUG=b:354834461 TEST=Built for Google Dedede and verifed that CrashLog is enabled by default. Change-Id: Ib0487bd6a5bfdad2a80fd0787e009e48f4527d38 Signed-off-by: Jędrzej Ciupis <jciupis@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-08-21mb/google/byra/var/kinox: Add/update VBT filesMatt DeVillier
Kinox has two VBT options, selected via fw_config. Add the second option to CBFS, and update the original file. Extracted from Google_Kinox.14505.704.0.bin. TEST=build/boot kinix, verify firmware display init successful and payload menu visible. Verify correct VBT selected via cbmem log. Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/goog/brox: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify brox DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/goog/rex: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify rex DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I3fdc02a82d197fd2b075e0a66c578149cef3a69f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/goog/brya: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=firmware-brya-14505.B TEST=verify brask, nissa, or brya DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-20mb/google/ovis/var/deku: Set TCC_offset to 12Tony Huang
Adjust settings as recommended by thermal team. Set tcc_offset value to 12 in devicetree. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I0ae97bb0b2dbb2fe8f35221522506ec1f7da47f6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83971 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-20mb/google/nissa/var/riven: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: I87cfbdd0b8a97d84a96af373855219c60f39f173 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-20mb/google/nissa/var/nivviks: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: Ib654f22033c68edbc602f14537aaa2151800598d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83943 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/brox/jubilant: Update fw_configMorris Hsu
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting. BUG=None TEST=emerge-brox coreboot Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot. Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:42:12 +0000