summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2022-01-14mb/google/brya/var/redrix{4es}: Add host device event supportWisley Chen
2022-01-14mb/google/brya/var/redrix{4es}: Set tcc_offset value to 3Wisley Chen
2022-01-14mb/google/brya/var/anahera{4es}: Set tcc_offset value to 3Wisley Chen
2022-01-14mb/google/brya/var/felwinter: Update USB Type-C PLDEric Lai
2022-01-14mb/google/brya/var/felwinter: Update audio_amp fw config field nameEric Lai
2022-01-14mb/google/brya0: Enable CNVi DDR RFIM for brya0 variantRonak Kanabar
2022-01-14mb/google/brya: move SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES to commonEric Lai
2022-01-14soc/intel/jsl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
2022-01-14soc/intel/tgl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
2022-01-14mb/google/brya/var/agah: update overridetreeTony Huang
2022-01-14soc/amd/cezanne: factor out eSPI SPI2 pads configuration functionsFelix Held
2022-01-14soc/intel/tigerlake: add devicetree option PcieRpSlotImplementedMichael Niewöhner
2022-01-13mb/google/brya: Adjust CSE RO and Data partition in the CSE regionSridhar Siricilla
2022-01-13mb/google/brya: Variants with ESx SoC use NEM for CARSubrata Banik
2022-01-13mb/google/brya/var/felwinter: Update ELAN touch HIDEric Lai
2022-01-12mb/google/brya/var/taeko: Modify power sequence for SSD deviceKevin Chang
2022-01-12mb/google/glados/variants/sentry: Increase CPU critical temp threshold to 105CSumeet Pawnikar
2022-01-12mb/google/dedede/var/beadrix: Configure GPIO settingsTeddy Shih
2022-01-12mb/google/dedede/var/beadrix: Correct memory settingsTeddy Shih
2022-01-12mb/google/brya: Move gpio_pm settings for brya variants to baseboardsTim Wawrzynczak
2022-01-12mb/google/guybrush/var/dewatt: Update unused GPIO pinsKenneth Chan
2022-01-12mb/google/guybrush/var/dewatt: Support ALC5682I-VS codecKenneth Chan
2022-01-11mb/google/brya/var/volmar: Generate SPD ID for supported partsDavid Wu
2022-01-11soc/intel/alderlake: Factor out A0 stepping workaroundAngel Pons
2022-01-11mb/google/brya: Check if descriptor is writableAngel Pons
2022-01-11mb/google/brya/bootblock.c: Sync cosmetics with adlrvpAngel Pons
2022-01-11mb/google/brya: Restructure PMC descriptor updateAngel Pons
2022-01-11mb/google/brya/(brya0,taeko): Use eNEM for CAR by defaultSubrata Banik
2022-01-10src/mainboard/google: Remove unused <acpi/acpi.h>Elyes HAOUAS
2022-01-10src/mainboard/google: Remove unused <console/console.h>Elyes HAOUAS
2022-01-10src/mainboard: Remove unused <stdlib.h>Elyes HAOUAS
2022-01-10src/mainboard: Remove unused <delay.h>Elyes HAOUAS
2022-01-10mb/google/hatch/var/mushu: Add VBTDominik Behr
2022-01-10mb/google/brya/var/brask: Update PL and PsysPLCurtis Chen
2022-01-10mb/google/brya/var/vell: Enable SaGvRobert Chen
2022-01-10guybrush: Inject SPDs into APCBRob Barnes
2022-01-10mb/google/brya: Create volmar variantDavid Wu
2022-01-10mb/google/brya/var/agah: move memory makefile to correct pathTony Huang
2022-01-10mb/google/hatch/var/scout: Update DPTF parametersKenneth Chan
2022-01-10mb/google/volteer/var/chronicler: add Elan touch supportSheng-Liang Pan
2022-01-10mb/google/brya: Use genesyslogic gl9755 SD card reader for FelwinterEric Lai
2022-01-08mb/google/herobrine: Add support for audioSrinivasa Rao Mandadapu
2022-01-07mb/google/herobrine: Initialize EC and TPM devicesShelley Chen
2022-01-07mb/google/brya/var/vell: Add MIPI camera infoShon Wang
2022-01-07mb/google/brya/var/vell: Swap TPM I2C with touchscreen I2CShon Wang
2022-01-07mb/google/brya/var/taniks: Change probe for audio 4 channel speakerJoey Peng
2022-01-07mb/google/dedede/var/boten: Add Wifi SAR for bookemStanley Wu
2022-01-07mb/google/corsola: Enable the SD card readerRex-BC Chen
2022-01-07mb/google/brya/var/redrix: Tune I2c frequencyWisley Chen
2022-01-07mb/google/brya/var/anahera: Fine tune I2C frequencyWisley Chen
2022-01-07mb/google/brya/anahera: Swap TPM I2C with touchscreen I2CWisley Chen
2022-01-07mb/google/brya/anahera{4es}: Correct WWAN power sequenceWisley Chen
2022-01-07mb/google/brya/anahera{4es}: Correct SSD power sequenceWisley Chen
2022-01-07mb/google/brya/var/brask: Change TPM I2C to I2C1Zhuohao Lee
2022-01-06mb/google/herobrine: Fix board idShelley Chen
2022-01-06mb/google/guybrush/var/dewatt: update USB3 settings for passing SIKenneth Chan
2022-01-06mb/google/brya/var/anahera{4es}: Add Chrome OS privacy screen _HIDTim Wawrzynczak
2022-01-06mb/google/brya/var/agah: Add new memory supportTony Huang
2022-01-06mb/google/guybrush/var/dewatt: Update for RT1019 amp dev id was changedKenneth Chan
2022-01-06mb/google/brya: Create agah variantTony Huang
2022-01-06mb/google/corsola: Configure audioRex-BC Chen
2022-01-05mb/google/volteer/var/delbin: Add fw_config probe for ALC5682-VD & VSFrankChu
2022-01-05mb/google/brya/var/taeko:Remove duplicate DB_SD fw_config fields.Joey Peng
2022-01-05mb/google/sarien: Add VBT extracted from Chrome OSPaul Menzel
2022-01-05mb/google/sarien/Kconfig: Remove blank line at beginningPaul Menzel
2022-01-05mb/google/brya/var/primus: Fix some GPIO programmingAriel Fang
2022-01-05mb/google/dedede/var/bugzzy: Increase reset_delay_ms for touch screenSeunghwan Kim
2022-01-05mb/google/brya/(anahera,primus): Use eNEM for CAR by defaultSubrata Banik
2022-01-05mb/google/dedede/var/storo: Generate SPD ID for Samsung K4U6E3S4AA-MGCRZhi Li
2022-01-05mb/google/herobrine: Initialize `pins` to fix the compilation issueSubrata Banik
2022-01-05google/herobrine: configure gpio to detect board IDRavi Kumar Bokka
2022-01-04mb/google/herobrine: Transition BOARD_HEROBRINE to BOARD_HEROBRINE_REV0Shelley Chen
2022-01-04mb/google/brya/var/kano: Add stylus probeDavid Wu
2022-01-04mb/google/brya/var/kano: Enable stylus pen powerDavid Wu
2022-01-04mb/google/brya: Add new baseboard nissa with variants nivviks and nereidReka Norman
2022-01-04mb/google/brya/var/taeko: Run-time probe for NVMe SSD and MMCKevin Chang
2022-01-04src/mb: Remove unused <string.h>Elyes HAOUAS
2022-01-04mb/google/guybrush/var/nipperkin: update USB 2.0 controller Lane ParameterKevin Chiu
2022-01-04mb/google/brya/var/taeko: Modify DPTF setting for taekoKevin Chang
2022-01-04mb/google/brya/var/taeko: swap TPM i2c with TS i2c for the next buildKevin Chang
2022-01-04mb/google/brya/var/kano: Set vGPIO reset typeDavid Wu
2022-01-04mb/google/brya/anahera: Add new memory supportWisley Chen
2022-01-04mb/google/brya/var/redrix: Add new memory supportWisley Chen
2022-01-04mb/google/brya/var/vell: update overridetree for DPShon Wang
2022-01-04mb/google/guybrush/var/dewatt: disable unused PCIe clock settingKenneth Chan
2022-01-04sb/intel: Use `bool` for PCIe coalescing optionAngel Pons
2022-01-03mb/google/dedede/var/bugzzy: Initialize display signals on user modeSeunghwan Kim
2022-01-03mb/google/brya/var/brask: Change I2C/DDC signalsRory Liu
2022-01-03mb/google/brya/var/gimble: Update Slow Slew RateMark Hsieh
2022-01-01mb/google/rambi: Select board-specific options per boardFelix Singer
2022-01-01mb/google/volteer: Move selects from Kconfig.name to KconfigFelix Singer
2022-01-01mb/google/deltaur: Select board-specific options per boardFelix Singer
2022-01-01mb/google/deltaur: Move selects from Kconfig.name to KconfigFelix Singer
2022-01-01mb/google/cyan: Move selects from Kconfig.name to KconfigFelix Singer
2022-01-01mb/google/auron: Select board-specific options per boardFelix Singer
2022-01-01mb/google/auron: Move selects from Kconfig.name to KconfigFelix Singer
2022-01-01mb/google/beltino: Move selects from Kconfig.name to KconfigFelix Singer
2022-01-01mb/google/jecht: Move selects from Kconfig.name to KconfigFelix Singer
2022-01-01mb/google/slippy: Select board-specific options per boardFelix Singer
2022-01-01mb/google/slippy: Move selects from Kconfig.name to KconfigFelix Singer
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 06:08:54 +0000