Age | Commit message (Expand) | Author |
2022-02-04 | Hoglin: Switch to using i2c TPM | Shelley Chen |
2022-02-03 | mb/google/skyrim: Add new mainboard | Karthikeyan Ramasubramanian |
2022-02-03 | soc/amd/*/i2c: factor out common I2C pad configuration | Felix Held |
2022-02-03 | mb/google/guybrush: Separate nipperkin and dewatt mem_parts_used table | Rob Barnes |
2022-02-03 | mb/google/brya/variants/gimble: Disable PCIE RP 6 and TCSS Port 1 | Meera Ravindranath |
2022-02-03 | mb/google/brya: Implement variant_cros_gpios() for nissa baseboard | Reka Norman |
2022-02-03 | mb/google/brya: Override memory ID to 0 for nivviks and nereid P0 | Reka Norman |
2022-02-03 | mb/google/brya: Add SPD configs for nivviks and nereid | Reka Norman |
2022-02-03 | mb/google/brya: Fill in ec.h for nissa baseboard | Reka Norman |
2022-02-03 | mb/google/brya: Add memory config for nissa | Reka Norman |
2022-02-03 | mb/google/brya: Fill in gpio.h for nissa baseboard | Reka Norman |
2022-02-03 | mb/google/brya: Add Kconfig for SLP_S0_GATE | Reka Norman |
2022-02-03 | mb/google/brya: Add GPIO table for nissa | Reka Norman |
2022-02-02 | mb/google/guybrush: Enable PSP port 80s | Raul E Rangel |
2022-02-02 | mb/google/brya/var/vell: Enable SaGv | Gaggery Tsai |
2022-02-02 | mb/google/brya: Remove `mb_gpio_lock_config()` override function | Subrata Banik |
2022-02-02 | mb/google/brya: Lock FPMCU pins in brask and brya baseboards | Subrata Banik |
2022-02-02 | mb/google/brya: Lock PCH WP pin in brask and brya baseboards | Subrata Banik |
2022-02-02 | mb/google/brya: Lock TPM IRQ pin in brask and brya baseboards | Subrata Banik |
2022-02-02 | mb/google/brya: Lock TPM pin in brask and brya baseboards | Subrata Banik |
2022-02-01 | mb/google/brya: Use PAD config macro to add lock support | Meera Ravindranath |
2022-02-01 | mb/google/dedede/var/galtic: Generate SPD ID for Samsung K4U6E3S4AA-MGCR | FrankChu |
2022-02-01 | mb/google/dedede/var/galtic: Decrease core display clock to 172.8 MHz | FrankChu |
2022-01-31 | mb/**/Kconfig: Properly override `DISABLE_HECI1_AT_PRE_BOOT` | Angel Pons |
2022-01-31 | mb/**/Kconfig: Properly override `IGNORE_IASL_MISSING_DEPENDENCY` | Angel Pons |
2022-01-31 | mb/google/brya/variant/agah: Update memory settings | Bora Guvendik |
2022-01-31 | mb/google/brya: Create crota variant | Terry Chen |
2022-01-31 | mb/google/guybrush/guybrush: Add variant to disable HDMI | Zheng Bao |
2022-01-28 | mb/google/brya/var/redrix: Enable MKBP wake | Daisuke Nojiri |
2022-01-28 | mb/google/herobrine: Add senor support QUP FW for I2C and SPI | Ravi Kumar Bokka |
2022-01-28 | IASL: Ignore IASL's "Missing dependency" warning | Elyes HAOUAS |
2022-01-28 | mb/google/zork/var/shuboz: Add SPD ID for MT40A512M16TB-062E:R | Kane Chen |
2022-01-28 | mb/google/brya: Remove EC_GOOGLE_CHROMEEC_ACPI_MEMMAP Kconfig | Tim Wawrzynczak |
2022-01-28 | mb/google/dedede/var/drawcia: Change power sequencing of Camera and VCM | Varshit B Pandya |
2022-01-27 | mb/google/brya/var/taniks: Enable Bayhub LV2 driver | Joey Peng |
2022-01-27 | mb/google/kukui: Add DRAM support for burnet/esche | Kevin Chiu |
2022-01-27 | mb/google/kukui: Add dedicated memory map for kappa | Kevin Chiu |
2022-01-27 | mb/google/dedede/var/metaknight: Set core display clock to 172.8 MHz | David Wu |
2022-01-27 | mb/google/brya/variants/volmar: Init devicetree for volmar | David Wu |
2022-01-27 | mb/google/brya/var/brask: set tcc_offset value to 10℃ | David Wu |
2022-01-27 | mb/google/zork/var/vilboz: Add new memory K4AAG165WB-BCWE | Frank Wu |
2022-01-26 | Revert "mb/google/brya/var/brask: Configure the ISOLATE pin of LAN" | Alan Huang |
2022-01-26 | mb/google/brya/var/kano: Reduce reset delay time to 20ms for ELAN TS | David Wu |
2022-01-26 | mb/google/guybrush/var/dewatt: Update Elan touchpad interrupt trigger | Kenneth Chan |
2022-01-26 | mb/google/guybrush/var/dewatt: Update touchpad GPIO configuration | Kenneth Chan |
2022-01-26 | mb/google/guybrush/dewatt: Add variant to disable HDMI | Zheng Bao |
2022-01-25 | mb/google/guybrush/var/nipperkin: Add Board values for eDP tuning | Zheng Bao |
2022-01-25 | mb/google/brya/var/taniks: Modify DPTF settings for taniks | Joey Peng |
2022-01-25 | mb/google/brya/var/taniks: swap TPM i2c with TS i2c for next build | Joey Peng |
2022-01-25 | mb/google/brya/var/taniks: Run time probe for NVMe SSD and MMC | Joey Peng |
2022-01-25 | soc/intel/adl: Replace dt `HeciEnabled` by `HECI1 disable` config | Subrata Banik |
2022-01-25 | mb/google/brya/var/volmar: Enable EC keyboard backlight | David Wu |
2022-01-25 | mb/google/brya/variants/volmar: Configure GPIOs according to schematics | David Wu |
2022-01-24 | mb/google/brya/var/banshee: Configure TPM I2C BUS | Ivy Jian |
2022-01-24 | mb/google/brya/var/banshee: update overridetree | Ivy Jian |
2022-01-24 | mb/google/brya: Alphabetize BOARD_GOOGLE_* in Kconfig.name | Tim Wawrzynczak |
2022-01-24 | mb/google/brya/var/{taeko, taeko4es}: Modify touchpad i2c signal | Joey Peng |
2022-01-24 | mb/google/guybrush: Change DDI settings for guybrush variants | Zheng Bao |
2022-01-22 | mb/google/guybrush/var/nipperkin: turn on WLAN ASPM L1ss | Kevin Chiu |
2022-01-21 | mb/google/brya/var/gimble{4es}: Decrease touchscreen T3 timing to 200ms | Scott Chao |
2022-01-21 | mb/google/brya/var/kano: Prevent camera LED blinking during boot | Jim Lai |
2022-01-21 | mb/google/puff/var/dooly: Add fw_config probe for ALC5682-VD/ALC5682-VS | Tony Huang |
2022-01-20 | mb/google/brya/var/banshee: update gpio settings | Ivy Jian |
2022-01-20 | mb/google/brya/var/banshee: Add SODIMM support | Eric Lai |
2022-01-20 | mb/google/brya: Add MEMORY_SODIMM and MEMORY_SOLDERDOWN config | Eric Lai |
2022-01-20 | mb/google/brya: Create banshee variant | Ivy Jian |
2022-01-19 | mb/google/brya/var/{taeko, taeko4es}: Add gpio.c in romstage | Kevin Chang |
2022-01-19 | mb/google/cherry: add configuration for dojo | Kevin Chiu |
2022-01-19 | mb/google/dedede/var/bugzzy: Add SAR sensor | Seunghwan Kim |
2022-01-18 | mb/google/brya/var/brask: Turn on I2C1 for TPM | Alan Huang |
2022-01-17 | mb/google/auron: Remove addition of EC firmware to build | Tim Wawrzynczak |
2022-01-17 | mb/google/brya/variants/*: Add cpu pcie rp flags | Tracy Wu |
2022-01-17 | mb/google/brya/var/taeko4es: Enable Bayhub LV2 driver | Kevin Chang |
2022-01-17 | mb/google/dedede/var/bugzzy: Set core display clock to 172.8 MHz | Seunghwan Kim |
2022-01-17 | soc/intel/cnl: Use Kconfig to disable HECI1 | Subrata Banik |
2022-01-17 | Revert "mb/google/dedede/var/beadrix: Remove SD controller" | Teddy Shih |
2022-01-17 | mb/google/dedede/var/beadrix: Add memory part and generate DRAM ID | Teddy Shih |
2022-01-17 | mb/google/brya/var/agah: update gpio override | Tony Huang |
2022-01-16 | soc/intel/skl: Replace dt `HeciEnabled` by `HECI1 disable` config | Subrata Banik |
2022-01-14 | mb/google/brya/var/redrix{4es}: Add host device event support | Wisley Chen |
2022-01-14 | mb/google/brya/var/redrix{4es}: Set tcc_offset value to 3 | Wisley Chen |
2022-01-14 | mb/google/brya/var/anahera{4es}: Set tcc_offset value to 3 | Wisley Chen |
2022-01-14 | mb/google/brya/var/felwinter: Update USB Type-C PLD | Eric Lai |
2022-01-14 | mb/google/brya/var/felwinter: Update audio_amp fw config field name | Eric Lai |
2022-01-14 | mb/google/brya0: Enable CNVi DDR RFIM for brya0 variant | Ronak Kanabar |
2022-01-14 | mb/google/brya: move SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES to common | Eric Lai |
2022-01-14 | soc/intel/jsl: Replace dt `HeciEnabled` by `HECI1 disable` config | Subrata Banik |
2022-01-14 | soc/intel/tgl: Replace dt `HeciEnabled` by `HECI1 disable` config | Subrata Banik |
2022-01-14 | mb/google/brya/var/agah: update overridetree | Tony Huang |
2022-01-14 | soc/amd/cezanne: factor out eSPI SPI2 pads configuration functions | Felix Held |
2022-01-14 | soc/intel/tigerlake: add devicetree option PcieRpSlotImplemented | Michael Niewöhner |
2022-01-13 | mb/google/brya: Adjust CSE RO and Data partition in the CSE region | Sridhar Siricilla |
2022-01-13 | mb/google/brya: Variants with ESx SoC use NEM for CAR | Subrata Banik |
2022-01-13 | mb/google/brya/var/felwinter: Update ELAN touch HID | Eric Lai |
2022-01-12 | mb/google/brya/var/taeko: Modify power sequence for SSD device | Kevin Chang |
2022-01-12 | mb/google/glados/variants/sentry: Increase CPU critical temp threshold to 105C | Sumeet Pawnikar |
2022-01-12 | mb/google/dedede/var/beadrix: Configure GPIO settings | Teddy Shih |
2022-01-12 | mb/google/dedede/var/beadrix: Correct memory settings | Teddy Shih |
2022-01-12 | mb/google/brya: Move gpio_pm settings for brya variants to baseboards | Tim Wawrzynczak |
2022-01-12 | mb/google/guybrush/var/dewatt: Update unused GPIO pins | Kenneth Chan |