index
:
coreboot.git
macbookair5_2
macbookpro10_1
main
master
mbp101_medisable
mbp101_medisable_1
mbp82
x230
my copy of coreboot
User &
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
src
/
mainboard
/
google
Age
Commit message (
Expand
)
Author
2017-03-28
vboot: Move remaining features out of vendorcode/google/chromeos
Julius Werner
2017-03-28
chromeos / broadwell / jecht: Make save_chromeos_gpios() jecht-specific
Julius Werner
2017-03-28
vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default
Julius Werner
2017-03-28
vboot: Remove VBOOT_DYNAMIC_WORK_BUFFER Kconfig option
Julius Werner
2017-03-28
vboot: Select SoC-specific configuration for all Chrome OS boards
Julius Werner
2017-03-27
ec: Use EC_ENABLE_LID_SWITCH for all mainboards with LID using chromeec
Furquan Shaikh
2017-03-27
mainboard/google/rambi: Move SIO_EC_ENABLE_PS2K to onboard.h
Furquan Shaikh
2017-03-24
mainboard/google/snappy: Update DPTF settings
Wisley Chen
2017-03-23
google/fizz: Update device tree from schematic
Shelley Chen
2017-03-23
google/fizz: Transfer gpio from schematic
Shelley Chen
2017-03-23
google/fizz: Remove poppy-specific configs
Shelley Chen
2017-03-23
google/fizz: Add new board
Shelley Chen
2017-03-22
mainboard/google/reef: add nasher variant
YH Lin
2017-03-21
google/pyro: Update DPTF settings
Kevin Chiu
2017-03-21
mainboard/google/poppy: Use sideband IRQ for SD Card Detect
Furquan Shaikh
2017-03-21
google/sand: Add Raydium touchscreen device
Katherine Hsieh
2017-03-20
mainboard/google/snappy: Update _hid name for weida touchscreen
Wisley Chen
2017-03-19
mb/google/reef: Remove CPU throttling effect of the charger sensor
Sumeet Pawnikar
2017-03-17
google/veyron: Clean out unused board variants
Julius Werner
2017-03-17
google/veyron: Work around RAM code strapping error
Julius Werner
2017-03-17
mainboard/google/poppy: Enable EC SW sync
Furquan Shaikh
2017-03-16
google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQ
Rizwan Qureshi
2017-03-16
google/eve: Use rt5663 interrupt as GpioInt instead of PIRQ
Duncan Laurie
2017-03-16
mainboard/google/reef: Increase PL2 Max to 15W
Tim Chen
2017-03-15
google/eve: Update MCU GPIOs configuration
Vincent Palatin
2017-03-15
google/eve: Apply default AC/DC loadline settings
Duncan Laurie
2017-03-15
intel/skylake: Fix bug in VR configuration with FSP 2.0
Duncan Laurie
2017-03-15
google/eve: Use rt5514 instead of 4ch DMIC
Duncan Laurie
2017-03-15
mainboard/google/reef: Add FPF_STATUS FMAP region
Andrey Petrov
2017-03-14
google/sand: Remove support for tablet mode switch
Katherine Hsieh
2017-03-12
google/poppy: Enable internal pull-up on PWRBTN#
Shobhit Srivastava
2017-03-10
google/sand: Add devicetree.cb file for sand
Katherine Hsieh
2017-03-10
mainboard/google/reef: Modify TCPU, TSR2 and TRT table
Tim Chen
2017-03-10
mainboard/google/reef: Configure SDCARD card detect pin
Venkateswarlu Vinjamuri
2017-03-09
drivers/spi/tpm: provide Kconfig to indicate CR50 usage
Aaron Durbin
2017-03-09
mainboard/google/reef: increase pre cbmem console size for Chrome OS
Aaron Durbin
2017-03-09
google/poppy: Configure SRCCLKREQ4 as No Connect
Naresh G Solanki
2017-03-09
google/pyro: Update DPTF settings
Kevin Chiu
2017-03-09
mainboard/google/poppy: Enable cros_ec_keyb device
Furquan Shaikh
2017-03-08
mainboard/google/poppy: Add EC_HOST_EVENT_MODE_CHANGE to wakeup source
Furquan Shaikh
2017-03-08
google/eve: Configure GPIOs for new board
Duncan Laurie
2017-03-08
mainboard/google/snappy: Override USB2 phy setting
Wisley Chen
2017-03-07
google/gru: add MAX_SDRAM_FREQ config to choose max ddr freq
Shunqian Zheng
2017-03-07
google/veyron: add K4B4G1646E-BYK0 ddr with ramid 000Z
Shunqian Zheng
2017-03-07
google/veyron_*: Add new Micron and Hynix modules
David Hendricks
2017-03-07
google/poppy: fix finger print sensor interrupt gpio configuration
Rizwan Qureshi
2017-03-02
mainboard/google/poppy: Disable deep S3 on poppy
Furquan Shaikh
2017-02-25
mainboard/google/reef: keep LPSS_UART2_TXD high in suspend state
Aaron Durbin
2017-02-25
google/eve: Add rise/fall times for I2C buses
Duncan Laurie
2017-02-24
mainboard/google/poppy: Change touchscreen IRQ to level-triggered
Furquan Shaikh
2017-02-23
google/gru: whitespace fix
Patrick Georgi
2017-02-23
google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection threshold
William wu
2017-02-23
google/gru: update the pwm regulator
Caesar Wang
2017-02-23
mb/google/poppy: Enable support for DPTF
Sumeet Pawnikar
2017-02-23
google/oak: Add initial support for Rowan
Yidi Lin
2017-02-23
google/gru: improve eye diagram for passing the test
Caesar Wang
2017-02-22
acpi: Add ACPI_ prefix to IRQ enum and struct names
Furquan Shaikh
2017-02-22
google/gru: Fix whitespace
Patrick Georgi
2017-02-21
mainboard/google/poppy: Enable Realtek 5663 support
Rizwan Qureshi
2017-02-21
mainboard/google/poppy: Enable Maxim MAX98927 codec
Rizwan Qureshi
2017-02-21
mainboard/google/poppy: Generate required nhlt table
Rizwan Qureshi
2017-02-20
drivers/i2c: Use I2C HID driver for wacom devices
Furquan Shaikh
2017-02-20
google/eve: Set touchscreen I2C bus speed to 1MHz
Duncan Laurie
2017-02-20
google/eve: Add audio devices
Duncan Laurie
2017-02-20
mainboard/{google,intel}: Change config option selection
Furquan Shaikh
2017-02-20
mainboard/google/reef: Remove config DRIVERS_GENERIC_GPIO_REGULATOR
Furquan Shaikh
2017-02-20
google/slippy: consolidate variants' common mainboard.asl code
Matt DeVillier
2017-02-20
google/eve: Set rise/fall timing values for I2C bus 1
Duncan Laurie
2017-02-20
google/eve: Fix FPC support
Duncan Laurie
2017-02-17
mainboard/eve: select SOC_INTEL_KABYLAKE
Rizwan Qureshi
2017-02-17
mainboard/poppy: select SOC_INTEL_KABYLAKE
Rizwan Qureshi
2017-02-17
mainboard/google/poppy: Generate digitizer node in SSDT
Furquan Shaikh
2017-02-16
mainboard/google/eve: Generate FPC device using SPI SSDT generator
Furquan Shaikh
2017-02-15
mainboard/google/reef: add sand variant
YH Lin
2017-02-14
google/eve: change touchpad HID
Wei-Ning Huang
2017-02-14
google/rambi: add explicit pull-down for ram-id
Matt DeVillier
2017-02-14
google/poppy: select NO_FADT_8042
Jenny TC
2017-02-13
mainboard/google/snappy: Update DPTF settings
Wisley Chen
2017-02-11
mainboard/google/reef: Increase PL1 sampling period
Sumeet Pawnikar
2017-02-11
google/gru: add scarlet variant
philipchen
2017-02-07
mainboards/google/reef: Add support for tablet mode switch.
Gwendal Grignou
2017-02-07
google/eve: Add support for tablet mode switch.
Gwendal Grignou
2017-02-05
google/eve: Fix keyboard backlight enable in wake from G3
Duncan Laurie
2017-02-04
google/jecht: Fix LED for guado/rikku variants
Matt DeVillier
2017-02-04
Revert "google/pyro: remove Wacom touchscreen probed flag"
Kevin Chiu
2017-02-04
google/eve: Fix DRAM DQS map
Duncan Laurie
2017-02-04
google/poppy: Set GPIO GPP_D22 high
Rizwan Qureshi
2017-02-04
google/eve: Set GPIO GPP_D22 high
Duncan Laurie
2017-02-03
mainboard/google/snappy: Set PL2 override to 15000mW
Harry Pan
2017-02-01
Add Baytrail ChromeOS devices using variant scheme
Matt DeVillier
2017-01-31
google/veyron*: mark GPIO array non-static
Patrick Georgi
2017-01-31
mainboard/google/reef: remove NHLT DMIC 1ch and 2ch configuration
Sathyanarayana Nujella
2017-01-31
mainboard/google/reef: Set edge triggered interrupt for GPIO_22
Vaibhav Shankar
2017-01-29
mainboard/google/snappy: Update WDT touchscreen device
Furquan Shaikh
2017-01-29
mainboard/google/pryo: Update touchscreen device ACPI nodes
Furquan Shaikh
2017-01-29
i2c/generic: Allow GPIOs to be put in _CRS and PowerResource in ACPI
Furquan Shaikh
2017-01-29
mainboard/google/reef: Set IOSSTATE for trackpad I2C GPIOs
Vaibhav Shankar
2017-01-26
google/pyro: Add USB2 phy setting override
Kevin Chiu
2017-01-26
google/pyro: Disable Wacom touchscreen probed
Kevin Chiu
2017-01-25
google/pyro: Modify Wacom touchscreen IRQ type to level-triggered
Kevin Chiu
[next]