summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Expand)Author
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
2020-08-07mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OSMartin Roth
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
2020-08-07mb/google/volteer: support variant defined spd pathsNick Vaccaro
2020-08-07Revert "mb/google/volteer/var/halvor: Update dq/dqs mappings"Paul Fagerburg
2020-08-07mb/google/dedede/var/magolor: Select 16 MB SPI ROMRen Kuo
2020-08-06mb/google/volteer/var/halvor: Update dq/dqs mappingsAmanda Huang
2020-08-06mb/google/zork: Configure GPIO_89 as PAD_NCFurquan Shaikh
2020-08-06mb/google/zork: Add touchscreen power controlFurquan Shaikh
2020-08-06mb/google/zork: Switch USI_RESET to active low polarity for v3.6+Furquan Shaikh
2020-08-06mb/google/zork: Use dev_nested_path for dmic gpio updateJosie Nordrum
2020-08-06mb/google/zork: Make SW changes for HP_INT_ODL in schematic v3.6Josie Nordrum
2020-08-06mb/google/zork: Add kconfigs to check schematic version 3.6Josie Nordrum
2020-08-06mb/google/volteer: add support for ddr4 memoryNick Vaccaro
2020-08-06mainboard/google/puff: Remove second temp sensorAndrew McRae
2020-08-06mb/google/kukui: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
2020-08-06mb/google/kukui: Add a new config 'Fennel'xiatao5
2020-08-05mb/google/volteer/var/voxel: Add Raydium touchscreen supportDavid Wu
2020-08-05mb/google/vilboz: update telemetry settings for vilbozPeichao Wang
2020-08-05mb/google/zork/ezkinil: Fix ELAN touchscreen ACPI nodeLucas Chen
2020-08-05src: Use space after 'if', 'for'Elyes HAOUAS
2020-08-05baytrail mainboards: Clean up mainboard.cArthur Heymans
2020-08-05mb/google/zork: update DRAM SPD table for dirinbozKevin Chiu
2020-08-04mb/google/zork/var/vilboz: Enable support for garaged stylusFurquan Shaikh
2020-08-04soc/intel/baytrail: Factor out `acpi_fill_madt()`Angel Pons
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
2020-08-03mb/google/zork: Pass oscout system clk to rt5682Akshu Agrawal
2020-08-03mb/google/dedede: Update CPU critical temperatureSumeet R Pawnikar
2020-08-03mb/google/kukui: Add Micron 8GB discrete LPDDR4X DDR supportHuayang Duan
2020-08-03mb/google/dedede/var/madoo: Add discrete WiFi configurationDtrain Hsu
2020-08-03mb/google/dedede/var/madoo: Support Elan touchpad and configure I2C portsDtrain Hsu
2020-08-03mb/google/dedede/var/madoo: Enable Goodix touchscreenIan Feng
2020-08-03mb/google/volteer: Change wake to be triggered on a raising edgeAlex Levin
2020-08-03mb/google/kukui: indent config names for burnet and escheHung-Te Lin
2020-08-03mb/google/volteer/var/todor: Support ELAN i2c-hid touchpadDavid Wu
2020-08-03mb/google/zork: Add Samsung K4AAG165WA-BCTD SPDKevin Chiu
2020-07-30mb/amd,google/mandolin,zork: Set EFS SPI platform configMatt Papageorge
2020-07-30mb/google/zork: remove indirection for dxio lane configurationAaron Durbin
2020-07-30mb/google/zork/var/ezkinil: Configure boot media for new SKUsLucas Chen
2020-07-30mb/google/zork: add USB over-current pin mapping to devicetreeFelix Held
2020-07-30mb/google/dedede: Add Goodix touchscreenEvan Green
2020-07-29mb/google/volteer: Update TCSS D3Hot and D3Cold configurationJohn Zhao
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
2020-07-29mb/google/zork: update stapm parameter for berknipKevin Chiu
2020-07-29mb/google/dedede/var/magalor: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
2020-07-28mb/google/zork: Add Bluetooth reset gpios to devicetreeRob Barnes
2020-07-28mb/google/dedede/var/madoo: Generate SPD ID for supported partsDtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Add audio support (ALC5682, MX98360A)Dtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Configure USB port setting for MadooDtrain Hsu
2020-07-28mb/google/dedede/var/madoo: Configure GPIO for MadooDtrain Hsu
2020-07-28mb/google/volteer/var/voxel: Add memory configurationSheng-Liang Pan
2020-07-28mb/google/volteer/var/volteer: I2C5 trackpad bus freq 400 kHz Johnny Li
2020-07-28mb/google/volteer2: Add support for passive USB-C daughterboardCaveh Jalali
2020-07-28mb/google/dedede/var/waddledee: Add discrete WiFi configurationKarthikeyan Ramasubramanian
2020-07-28mb/google/volteer: sync'ing todor with terradorYH Lin
2020-07-28mb/google/volteer: Create todor variantYH Lin
2020-07-28broadwell: Factor out PIRQ routing from devicetreeAngel Pons
2020-07-28lynxpoint: Factor out PIRQ routing from devicetreeAngel Pons
2020-07-28volteer: Create eldrid variantMiceLin
2020-07-27mb/google/hatch: Add smart battery I2C passthrough for DratiniTim Wawrzynczak
2020-07-27mb/google/kukui: Add discrete LPDDR4X DDR table support for burnet/escheKevin Chiu
2020-07-27mb/google/volteer: Add gpio-keys ACPI node for PENHAlex Levin
2020-07-27mb/google/volteer: Modify Delbin variantKane Chen
2020-07-27mb/google/dedede: Remove Rcomp resistor and target valuesMeera Ravindranath
2020-07-27dedede: Create magolor variantRen Kuo
2020-07-26mb/*/*/devicetree.cb: Normalize disabled PIRQ valuesAngel Pons
2020-07-26mb/google/volteer/var/terrador: Support ELAN i2c-hid touchpadDavid Wu
2020-07-26mb/google/kukui: send SKU ID to EC for device-specific configurationHung-Te Lin
2020-07-26mb/mainboard/dedede: update GPIO table for Botenyan.liu
2020-07-26mb/google/dedede: Change HDMI DDC GPIOs to native functionMaulik V Vaghela
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
2020-07-26src: Remove unneeded space in license headerElyes HAOUAS
2020-07-26mb/google/dedede/var/drawcia: Add G2Touch touchscreen supportWisley Chen
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
2020-07-26*/mb/google/volteer/**/gpio.h: Fix up license headerAngel Pons
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
2020-07-26mb/google/zork: remove ACPI_FADT_RESET_REGISTER from fadt_flagsFelix Held
2020-07-26amd/picasso: rework USB2 PHY tune parameter handlingFelix Held
2020-07-25soc/amd/picasso: don't apply unconfigured USB2 PHY tune parametersFelix Held
2020-07-25soc/intel/tigerlake: Set power limits for Tiger Lake Y-SKUSumeet R Pawnikar
2020-07-24mb/google/volteer: Remove unused dptf.asl filesTim Wawrzynczak
2020-07-24mb/google/octopus/variants/garg: update Garfour SKU IDTony Huang
2020-07-23mb/google/zork: Don't expose reset GPIO for touchscreen to OSRaul E Rangel
2020-07-23mb/google/zork/variants/dalboz: Use HS200 for eMMCEric Peers
2020-07-23zork: Create dirinboz variantKevin Chiu
2020-07-23mb/google/arcada: Enable bayhub 720 on ArcadaMark Hsieh
2020-07-23mb/google/sarien: Enable bayhub 720 on SarienIvy Jian
2020-07-23mb/google/dedede/var/waddledoo: Configure stop delay for SiS TSKarthikeyan Ramasubramanian
2020-07-23mb/google/dedede/var/drawcia: Generate SPD ID for supported partsKarthikeyan Ramasubramanian
2020-07-23mb/google/zork: Fix Goodix touchscreen ACPI nodeFurquan Shaikh
2020-07-23mb/google/zork/var/morphius: Change hid and desc for Goodix touchscreenFurquan Shaikh
2020-07-23mb/google/zork: Drop TODO for GPIO_91Furquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for dalboz referenceFurquan Shaikh
2020-07-23mb/google/zork: Configure all pads in ramstage for trembyle referenceFurquan Shaikh