Age | Commit message (Expand) | Author |
2014-01-22 | CBMEM: Replace cbmem_initialize() with cbmem_recovery() | Kyösti Mälkki |
2014-01-20 | google/butterfly: Remove unused cmos.layout options | Alexandru Gagniuc |
2014-01-20 | google/falco/board_info.txt: Declare as a laptop. | Vladimir Serbinenko |
2014-01-19 | board_info.txt: declare chromebooks as laptops. | Vladimir Serbinenko |
2014-01-19 | board-status: Add board_info.txt extracted from wiki. | Vladimir Serbinenko |
2014-01-16 | butterfly: fix compilation with !CHROMEOS | Vladimir Serbinenko |
2014-01-15 | Intel (sandy/ivy): Avoid calling cbmem_initialize() twice | Kyösti Mälkki |
2014-01-15 | google/stout: Add EARLY_CBMEM_INIT | Kyösti Mälkki |
2014-01-12 | ibexpeak / bd82x6x: Make SATA mode user-visible option. | Vladimir Serbinenko |
2014-01-12 | CBFS: use cbfs_get_file_content whenever possible rather than cbfs_get_file | Vladimir Serbinenko |
2014-01-10 | Replace all occurences of sprintf with snprintf | Vladimir Serbinenko |
2013-12-24 | Remove PCI_ROM_RUN option | Vladimir Serbinenko |
2013-12-23 | Coding style: punctuation cleanup [1/2]. | Idwer Vollering |
2013-12-21 | exynos5420: Configure the UART pins unconditionally | Gabe Black |
2013-12-21 | exynos5250: Implement support to boot with USB A-A firmware upload | Julius Werner |
2013-12-21 | snow: Set up the i2s0 pins during boot | Gabe Black |
2013-12-21 | armv7/exynos: Fix and remove memory reset workarounds | Hung-Te Lin |
2013-12-21 | Pit: graphics | Ronald G. Minnich |
2013-12-21 | kirby is dead. long live the arm pit. | Stefan Reinauer |
2013-12-21 | pit: update PMIC write sequence in romstage | David Hendricks |
2013-12-21 | snow: TPS69050 -> TPS65090 | David Hendricks |
2013-12-21 | kirby: pit: Fix up wakeup_need_reset | Gabe Black |
2013-12-21 | pit: Get rid of the mostly unnecessary exynos5420.h | Gabe Black |
2013-12-21 | kirby: Clean some cruft from mainboard.c | Gabe Black |
2013-12-21 | kirby: Neutralize wakeup.c and delete the mostly unused exynos5420.h | Gabe Black |
2013-12-21 | Add a kirby board which is mostly a copy of pit | Gabe Black |
2013-12-21 | Exynos 5420: Enable dynamic CBMEM | Stefan Reinauer |
2013-12-21 | Exynos 5250: Enable dynamic CBMEM | Stefan Reinauer |
2013-12-21 | google/pit: disable SYSMMU for graphics | Ronald G. Minnich |
2013-12-21 | Refactor code containing aux calls | Furquan Shaikh |
2013-12-21 | Slippy/Falco: Fill in right values for PHSYNC and PVSYNC in transcoder flags | Furquan Shaikh |
2013-12-21 | Add cpu transcoder attribute to intel dp | Furquan Shaikh |
2013-12-21 | Calculate transcoder flags based on pipe config | Furquan Shaikh |
2013-12-21 | peppy: Set optimal DTLE register values | Shawn Nematbakhsh |
2013-12-21 | slippy/falco/peppy: Fix EC wake events in S5 | Duncan Laurie |
2013-12-21 | falco: Force enable ASPM on PCIe Root Port 1 | Duncan Laurie |
2013-12-21 | falco: Disable unused clocks | Duncan Laurie |
2013-12-21 | falco: Enable EC controlled throttling | Duncan Laurie |
2013-12-21 | falco: Drive GPIO59/LTE_DISABLE_L low on S3/S5 | Duncan Laurie |
2013-12-21 | pit: Add missing elements to the edid data structure | Gabe Black |
2013-12-21 | pit: Bump the EC SPI bus speed up to 5 MHz | Gabe Black |
2013-12-21 | falco: add rtd2132 settings to device tree | Aaron Durbin |
2013-12-21 | Pit: set PWM to external on Parade | Ronald G. Minnich |
2013-12-21 | Pit: move parade writes to mainboard.c | Ronald G. Minnich |
2013-12-21 | peppy: Drive WLAN_DISABLE_L / BT_ON low in S3 and S5. | Shawn Nematbakhsh |
2013-12-21 | FUI: Fill in link_m and link_n values | Furquan Shaikh |
2013-12-21 | Slippy: remove unneeded code in i915io.c | Ronald G. Minnich |
2013-12-21 | slippy/falco/peppy: Route USB to XHCI on resume | Duncan Laurie |
2013-12-21 | haswell boards: fix SATA interrupt in ACPI | Duncan Laurie |
2013-12-21 | slippy/falco/peppy: update ACPI C-state settings | Duncan Laurie |
2013-12-21 | lynxpoint me: add support for mbp clear wait in finalize step | Duncan Laurie |
2013-12-21 | Revert "lynxpoint: Move ME lock down to ramstage" | Duncan Laurie |
2013-12-21 | SLIPPY: final changes for FUI | Ronald G. Minnich |
2013-12-21 | peppy: Duplicate SPD data for 2GB configurations. | Shawn Nematbakhsh |
2013-12-21 | haswell boards: Use PECI temp sensor id 0 | Duncan Laurie |
2013-12-21 | falco: Enable RTD2132 spread spectrum at 1.0% | Duncan Laurie |
2013-12-21 | bolt: make the gpio interrupts edge sensitive | Aaron Durbin |
2013-12-12 | bolt: Initial mainboard commit | Duncan Laurie |
2013-12-12 | HDA: Enable Mini-HDA and fix up PCH-HDA init | Duncan Laurie |
2013-12-12 | slippy/falco/peppy: make GPIO interrupts be edge triggered | Duncan Laurie |
2013-12-12 | falco: drive WLAN_DISABLE_L low in S3 and S5 | Aaron Durbin |
2013-12-12 | exynos5420: Setup clocks for MMC bus controller. | Hung-Te Lin |
2013-12-12 | peppy: Add backward-compatible RAM_ID table. | Shawn Nematbakhsh |
2013-12-12 | Peppy: Update Realtek ALC283 verb table | Martin Roth |
2013-12-12 | falco: fix usb port settings | Duncan Laurie |
2013-12-12 | falco: Remove thermal thresholds that use CTDP | Duncan Laurie |
2013-12-12 | PIT: remove a comment that is incorrect. | Ronald G. Minnich |
2013-12-12 | snow: Fix the edid data structure definition so depthcharge works again. | Gabe Black |
2013-12-12 | peppy: RAM_ID + storage changes for next build. | Shawn Nematbakhsh |
2013-12-12 | peppy: Disable audio codec enable GPIO in S3 + S5. | Shawn Nematbakhsh |
2013-12-07 | peppy: Enable power limiting for thermal control | Duncan Laurie |
2013-12-06 | butterfly: Fix build without ChromeOS | Kyösti Mälkki |
2013-12-05 | google/link: use the new edid functions when in FUI mode | Ronald G. Minnich |
2013-12-05 | peppy: Disable forced dev mode. | Shawn Nematbakhsh |
2013-12-05 | Fix Makefile to include all copies of the SPD sources | Duncan Laurie |
2013-12-03 | slippy/falco/peppy: Fix Chrome OS GPIO export in ACPI | Duncan Laurie |
2013-12-03 | haswell boards: Enable VIRTUAL_DEV_SWITCH | Duncan Laurie |
2013-12-02 | Add option to disable ChromeOS | Kyösti Mälkki |
2013-12-02 | haswell: Update pei_data to match ref code | Duncan Laurie |
2013-12-02 | falco: Update panel power sequence timings | Duncan Laurie |
2013-12-02 | peppy: Port updates from slippy/falco boards | Duncan Laurie |
2013-12-02 | peppy: Add 2GB DRAM configuration. | Shawn Nematbakhsh |
2013-12-02 | peppy: Re-enable EC software sync | Shawn Nematbakhsh |
2013-12-02 | peppy: Update GPIO table + USB port map. | Shawn Nematbakhsh |
2013-12-02 | Add description to MAINBOARD_VENDOR string so it can be overridden | Duncan Laurie |
2013-12-02 | peppy: Add an inverted input GPIO type | Shawn Nematbakhsh |
2013-12-02 | falco/slippy: Fix DMIC nid verb. | Dylan Reid |
2013-12-01 | slippy/falco/peppy: Fix SPD GPIO initialization. | Aaron Durbin |
2013-12-01 | Butterfly: Force DDR refresh rate to 2x. | Shawn Nematbakhsh |
2013-11-26 | lynxpoint: Add an inverted input GPIO type | Duncan Laurie |
2013-11-26 | google/parrot/smihandler.c: Use `battery_critical_logged` only with `ELOG_GSMI` | Paul Menzel |
2013-11-26 | slippy/falco: Re-enable EC software sync | Duncan Laurie |
2013-11-26 | falco: update verbs for ALC283 | Duncan Laurie |
2013-11-25 | slippy: update verbs for ALC283 | Dylan Reid |
2013-11-25 | peppy: Add Elipda DIMM SPD | Shawn Nematbakhsh |
2013-11-25 | peppy: Initial mainboard commit | Shawn Nematbakhsh |
2013-11-25 | falco: Update DIMM SPD table | Duncan Laurie |
2013-11-25 | falco: Add panel power sequence timings | Duncan Laurie |
2013-11-25 | falco: Add on-board devices and configure GPIO irq/wake | Duncan Laurie |
2013-11-25 | slippy: Add on-board devices and configure GPIO irq/wake | Duncan Laurie |