Age | Commit message (Expand) | Author |
2014-09-19 | baytrail/rambi: spi, charger, and audio updates | Aaron Durbin |
2014-09-18 | samus: Enable XHCI mode by default | Duncan Laurie |
2014-09-18 | rambi/baytrail: ACPI, GPIO, audio, misc updates | Shawn Nematbakhsh |
2014-09-18 | slippy: remove FUI support | Ronald G. Minnich |
2014-09-17 | spi: add Kconfig variable for dual-output read enable | David Hendricks |
2014-09-13 | intel/gma: consolidate vbt code | Vladimir Serbinenko |
2014-09-13 | arm: Move exception_init() close to console_init() | Julius Werner |
2014-09-13 | tegra124/nyan: display, clock, and other updates | Julius Werner |
2014-09-13 | azalia: Shrink boilerplate | Vladimir Serbinenko |
2014-09-12 | tegra124/nyan: various fixes and additions | Hung-Te Lin |
2014-09-12 | panther: update chromeos.c | Isaac Christensen |
2014-09-11 | tegra124/nyan: rougly stable code base | Gabe Black |
2014-09-11 | Move nehalem/sandy/ivy to per-device acpi | Vladimir Serbinenko |
2014-09-11 | mainboard/google/parrot: fix ACPI interrupt storm on lid switch change | Andrew Litt |
2014-09-10 | samus: Fix 8GB SPD | Duncan Laurie |
2014-09-10 | samus: GPIO updates for Proto1b | Duncan Laurie |
2014-09-10 | nyan: Add a stub mainboard. | Gabe Black |
2014-09-08 | Haswell/falco/peppy/slippy: continue to clean up FUI. | Ronald G. Minnich |
2014-09-08 | FALCO: stop using the slippy graphics code | Ronald G. Minnich |
2014-09-08 | samus: Disable SMBus controller | Duncan Laurie |
2014-09-08 | samus: Tweaks from bringup | Duncan Laurie |
2014-09-08 | samus: Fix up memory SPD information | Duncan Laurie |
2014-09-08 | samus: Add onboard device configuration | Duncan Laurie |
2014-09-08 | samus: Change thermal behavior to match other haswell platforms | Duncan Laurie |
2014-09-05 | Consolidate intel vga int15 hooks | Vladimir Serbinenko |
2014-09-05 | azalia: Use convenience macros throughout | Vladimir Serbinenko |
2014-09-01 | google/link: Use common i915_reg.h. | Vladimir Serbinenko |
2014-09-01 | stout: Kill dead i915 files | Vladimir Serbinenko |
2014-08-31 | samus: Change SPD to indicate LPDDR | Duncan Laurie |
2014-08-29 | samus: Add ACPI MADT interrupt override for GPIO IRQ 14 | Duncan Laurie |
2014-08-29 | samus: Add coreboot board | Duncan Laurie |
2014-08-28 | Peppy/Haswell: move more support functions from mainboard to the intel i915 d... | Ronald G. Minnich |
2014-08-26 | armv7: Move Exynos from 'cpu' to 'soc'. | Hung-Te Lin |
2014-08-26 | Peppy, Haswell: refactor and create set_translation_table function in haswell... | Ronald G. Minnich |
2014-08-25 | intel/gma: Clarify code and use dedicated init for Google Peppy | Ronald G. Minnich |
2014-08-22 | Remove dead video.asl | Vladimir Serbinenko |
2014-08-18 | trustzone: Pull trustzone init out of cpu.c and do it in romstage. | Gabe Black |
2014-08-18 | exynos5: Implement support for USB 3.0 DRD PHYs/controllers | Julius Werner |
2014-08-18 | azalia: Move shared variable to separate file | Vladimir Serbinenko |
2014-08-18 | mainboard/XXX/YYY/dsdt.asl: Whitespace fix | Martin Roth |
2014-08-15 | intel/cpu: rename car.h to romstage.h | Aaron Durbin |
2014-08-14 | pit: snow: Fix snow, fix up pit write protect. | Gabe Black |
2014-08-14 | Intel: Add common header file for CAR setup | Edward O'Callaghan |
2014-08-14 | exynos5: Refactor crazy old U-Boot base address macros away | Julius Werner |
2014-08-13 | Falco: Patch to setup FUI (coreboot initializations) for falco | Furquan Shaikh |
2014-08-13 | Falco: Patch to enable correct port clock selection for dp | Furquan Shaikh |
2014-08-13 | Falco/Slippy: Patch to refactor haswell/gma.c and mainboard/google/slippy/i91... | Furquan Shaikh |
2014-08-13 | chromeos: On ARM platforms VBNV lives in the EC | Stefan Reinauer |
2014-08-13 | arm: libpayload: Add cache coherent DMA memory definition and management | Julius Werner |
2014-08-12 | Haswell: Lower TJ_MAX to 100C. Adjust critical temps to match. | ChromeOS Developer |
2014-08-12 | exynos5420: minor clean-up memory related stuff | David Hendricks |
2014-08-12 | exynos5420/pit: re-factor membaseconfig0/1 usage | David Hendricks |
2014-08-12 | exynos5420: ddr3: Switch from 4G setup to 2G setup on exynos5420 | David Hendricks |
2014-08-12 | Exynos5420: ddr3: fine tuning the DDR3 timing values | David Hendricks |
2014-08-12 | exynos5: Refactor board-specific parts out of USB PHY code | Julius Werner |
2014-08-12 | exynos5420: Make USB A-A booting work with early data cache | Julius Werner |
2014-08-10 | bolt: Set GPIO29 as input in S0, output+high in S3/S5 | Duncan Laurie |
2014-08-10 | falco: Add support for Samsung memory | Duncan Laurie |
2014-08-10 | Falco/Slippy: Patch to remove redundant graphics initializations | Furquan Shaikh |
2014-08-08 | falco: Remove RTD2132 chip and setup from devicetree | Duncan Laurie |
2014-08-08 | Falco/Slippy: remove unwanted scratchpad writes | Furquan Shaikh |
2014-08-08 | falco: Add double function reset to ALC283 verb table | Duncan Laurie |
2014-08-08 | Pit: remove backlight delay | Ronald G. Minnich |
2014-08-08 | exynos5420: Implement support to boot with USB A-A firmware upload | Julius Werner |
2014-08-07 | exynos: Set up caching in the bootblock. | Gabe Black |
2014-08-06 | slippy/flaco/peppy: setup beep verbs | Marc Jones |
2014-08-05 | exynos5420: get rid of old exynos5420_config_l2_cache() | David Hendricks |
2014-08-04 | peppy: Force enable ASPM on PCIe Root Port 1 | Shawn Nematbakhsh |
2014-08-04 | falco: Re-read critical temperatures in ACPI _TMP | Duncan Laurie |
2014-08-03 | sandy/ivybridge: Make UMA size configurable. | Vladimir Serbinenko |
2014-07-31 | armv7/exynos5420: Configure CPU cores for kernel to enable SMP. | Hung-Te Lin |
2014-07-29 | pit: setup voltage rails before system clocks | David Hendricks |
2014-07-18 | mainboard: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-18 | google/panther: general cleanup, file organization (non-functional) | Matt DeVillier |
2014-07-18 | src/superio/ite/it8772f: Separate mainboard from SIO at obj level | Edward O'Callaghan |
2014-07-17 | mainboard,Makefile.inc: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-17 | mainboard,ASL: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-12 | libpayload: find source of input characters | Luigi Semenzato |
2014-07-12 | google/panther: adjust critical temp | Matt DeVillier |
2014-07-12 | google/panther: Force enable ASPM on PCIe Root Port 4 | Stefan Reinauer |
2014-07-12 | google/panther: acpi: Fix unstable fan behavior on boot + resume | Stefan Reinauer |
2014-07-12 | google/panther: Fix RW ramstage index | Stefan Reinauer |
2014-07-12 | google/panther: Add new thermal values | Mohammed Habibulla |
2014-07-12 | google/panther: Avoid shutdown when thermal sensor is unavailable | Stefan Reinauer |
2014-07-12 | google/panther: Re-read temperature if current reading would cause power-off | Stefan Reinauer |
2014-07-12 | google/panther: Disconnect speaker and mic in verb table | Stefan Reinauer |
2014-07-12 | google/panther: Disable DEVSLP for SATA | Stefan Reinauer |
2014-07-12 | google/panther: Add ACPI code to support wake-on-lan | Stefan Reinauer |
2014-07-12 | google/panther: Update Fan Policy | Stefan Reinauer |
2014-07-12 | google/panther: Disable power-failure gating for the PSON# signal | Stefan Reinauer |
2014-07-12 | google/panther: Configure USB_ILIM_SEL to low | Mohammed Habibulla |
2014-07-12 | google/panther: Set default interrupt value for Environmental Controller | Mohammed Habibulla |
2014-07-12 | google/panther: Make sure the S5 power status is on track | Mohammed Habibulla |
2014-07-12 | google/panther: Disable LPSS I2C controllers | Mohammed Habibulla |
2014-07-12 | google/panther: Fix thermal zone to use SIO PWM/TACH port 2 | Mohammed Habibulla |
2014-07-12 | google/panther: Use ISO C99 syntax for designated initializers | Matt DeVillier |
2014-07-12 | mainboard: Add new board Google Panther | Mohammed Habibulla |
2014-07-08 | mainboard: Trivial - drop trailing blank lines at EOF in .h | Edward O'Callaghan |
2014-07-08 | mainboard: Trivial - drop trailing blank lines at EOF | Edward O'Callaghan |
2014-07-08 | mainboard: Make use of ARRAY_SIZE macro in hda_verb.h | Edward O'Callaghan |