| Age | Commit message (Collapse) | Author |
|---|
|
Add a clock control driver to initialize the clock tree inside the
low-power audio subsystem. Depthcharge builds up on this to enable
audio function on storm.
The clock is hardcoded for 48KHz frame rate, two 16 bit channels.
BRANCH=storm
BUG=chrome-os-partner:35247
TEST=with depthcharge patches applied and Using depthcharge CLI audio
test program verified that the target generates sensible sounds
audio 100 100
audio 1000 5000
Change-Id: I56513fc782657ade99b6e43b2d5d3141d27ecc4e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0d4f408408aa38b2f0ee19b83ed490de39074760
Original-Change-Id: If8ffc326698fcea17e05d536930d927ca553481f
Original-Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/248830
Original-Reviewed-by: Dylan Reid <dgreid@chromium.org>
Reviewed-on: http://review.coreboot.org/9758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
move mmu setup from RAM stage to boot block
Enabling mmu earlier, helps speed up the boot time.
BRANCH=storm
BUG=chrome-os-partner:35024
TEST=Verified the mmu table dump matches the programmed values.
Change-Id: I8f581538d5dfd0d78538c9fe50f689d54b740685
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb799a6d61f9c2f478434a71584d0edb94af4b59
Original-Change-Id: I110497875002a88add7eb4312a70c0de8c28bc4f
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/247120
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Trevor Bourget <tbourget@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9756
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This brings brain, danger, and rialto up to parity with other
veyron platforms as far as eventlog functionality is concerned.
BUG=chrome-os-partner:34436
BRANCH=none
TEST="mosys eventlog list" shows events (tested on Brain)
Change-Id: I186c5d18e5351c0eaf08ffecfd87506283c44b19
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1764bc53147718031231a6d125a4a1a96c4c6a8f
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ief09299965f6f21bc5a40cef31cde61344025c2a
Original-Reviewed-on: https://chromium-review.googlesource.com/239979
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9755
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This applies a previous patch ("chromeos: Provide common watchdog
reboot support") to some veyron platforms that were missing it.
BUG=none
BRANCH=none
TEST=built and booted on Brain
Change-Id: I3eb431a57367b8f885844e4353a78f77515f5195
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b0c87dd4217917a35817c719efe43dd4ec442df0
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I2861939655a995d309847f64cecd974a740fae37
Original-Reviewed-on: https://chromium-review.googlesource.com/245633
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9754
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
we will use dvs to adjust the voltage in kernel, if device reset
by watchdog in kernel, the dvs gpio may not reset, and we use the
i2c to adjust rk808 voltage in coreboot, so it may failure. so we
move the reboot_from_watchdog() before the rk808 setting.
BUG=None
TEST=Boot from speedy
BRANCH=None
Change-Id: I809c63153d49680d9c84462aafd7bae09106fa6e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 76efb4b0196eecc84664a4c5dce2221152a39c0a
Original-Change-Id: I92b5c6413bbffe30566178de89df1f9683790982
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/244289
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9752
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this change covers bootblock and romstage.
BUG=none
BRANCH=tot
TEST=ran emerge-purin coreboot
Change-Id: Ifffb2e93189e8e85338de469432f3296e3e71791
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cd479583404958f72461e9c1639f0288a00f228e
Original-Change-Id: Iaee4a8c457e42386a4100a8121144b8cf5f21e8c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242853
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9751
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Many ChromeOS devices use a GPIO to reset the system, in order to
guarantee that the TPM cannot be reset without also resetting the CPU.
Often chipset/SoC hardware watchdogs trigger some kind of built-in
CPU reset, bypassing this GPIO and thus leaving the TPM locked. These
ChromeOS devices need to detect that condition in their bootblock and
trigger a second (proper) reboot.
This patch adds some code to generalize this previously
mainboard-specific functionality and uses it on Veyron boards. It also
provides some code to add the proper eventlog entry for a watchdog
reset. Since the second reboot has to happen before firmware
verification and the eventlog is usually only initialized afterwards, we
provide the functionality to place a tombstone in a memlayout-defined
location (which could be SRAM or some MMIO register that is preserved
across reboots).
[pg: Integrates
'mips: Temporarily work around build error caused by <arch/io.h> mismatch]
BRANCH=veyron
BUG=chrome-os-partner:35705
TEST=Run 'mem w 0xff800000 0x9' on a Jerry, watch how a "Hardware
watchdog reset" event appears in the eventlog after the reboot.
Change-Id: I0a33820b236c9328b2f9b20905b69cb934326f2a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fffc484bb89f5129d62739dcb44d08d7f5b30b33
Original-Change-Id: I7ee1d02676e9159794d29e033d71c09fdf4620fd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id: c919c72ddc9d2e1e18858c0bf49c0ce79f2bc506
Original-Change-Id: I509c842d3393bd810e89ebdf0dc745275c120c1d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242504
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9749
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:34436
BRANCH=none
TEST=Built and booted on pinky w/ depthcharge fmap patch,
used mosys to verify that eventlog entries get populated:
entry="0" timestamp="2015-01-06 13:45:33" type="Log area cleared" bytes="4096"
entry="1" timestamp="2015-01-06 13:45:33" type="System boot" count="0"
entry="2" timestamp="2015-01-06 13:45:33" type="Chrome OS Developer Mode"
Change-Id: I74ba8b271328453c8b91f11e7858754a80806c31
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 197010f057f4835a30ed2e71f47ca51fc181afe4
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I19cb884be5c3e00975599e96e0223e33d32e7c0d
Original-Reviewed-on: https://chromium-review.googlesource.com/238830
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9644
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- Hynix H5TC4G63CFR-PBA, ramcode = 5
BUG=chrome-os-partner:34695
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I53f9ebd9c38c645d1eb8b685d39e8beb55bd3c6a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ee6fdcc28402fe324d08b713498488d863d1d30f
Original-Change-Id: I829d4e1f992eadd445c313729eb4bca5ce602f53
Original-Reviewed-on: https://chromium-review.googlesource.com/245947
Original-Reviewed-by: Neil Chen <neilc%nvidia.com@gtempaccount.com>
Original-Tested-by: Neil Chen <neilc%nvidia.com@gtempaccount.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Neil Chen <neilc%nvidia.com@gtempaccount.com>
Reviewed-on: http://review.coreboot.org/9736
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
we use Kconfig define sdram size before, but there may use
different sdram size in the same overlay, so we must detect
sdram size at runtime now. If we use 4G byte sdram, we can
use[0x00000000:0xff000000], since the [0xff000000:0xffffffff]
is the register space.
BUG=chrome-os-partner:35521
TEST=Boot from mighty
BRANCH=None
Change-Id: I7a167c268483743c3eaed8b71c7ec545a688270c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ad4f27dd08c467888eee87e3d9c4ab3077751898
Original-Change-Id: Ib32aed50c9cae6db495ff3bab28266de91f3e73b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243139
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9734
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
I always had that TODO comment in there but I had already forgotten what
I even meant by it. It's really just a simple cleanup... this function
is (currently) veyron-specific and doesn't belong in common code.
BRANCH=veyron
BUG=None
TEST=Booted Jerry.
Change-Id: Iccd6130c90e67b8ee905e188857c99deda966f14
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d188398704575ad2fedc2a715e609521da2332b0
Original-Change-Id: I6ce701a15a6542a615d3d81f70aa71662567d4fa
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/241190
Reviewed-on: http://review.coreboot.org/9733
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA; works as expected.
BRANCH=none
Change-Id: If4493fcb37cf649fb0a56d594ac58556da3aa571
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f6764396be1ab17875d9c73624cce48dc6790e6
Original-Change-Id: I925ebd6ea4fc30c1c1d91559f96eaad62d06aba8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/239490
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9724
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current display init code causes Brain to crash when trying
to allocate resources. This just avoids doing display init if a
config variable is set. Once code has been implemented to properly
setup different types of displays we can get rid of this hack.
BUG=none
BRANCH=none
TEST=built and booted (to depthcharge) on Brain, compiled for
pinky with FEATURES=noclean and ensured config variable is 0
Change-Id: I9a7266c6bff5b7a6eb05b2b21fb65797bee392d6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 804632ca67eaaf4174ca597d83b8923cb9abd1b7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I04c9e8181c58fa0608fd20776fa8c4798a023474
Original-Reviewed-on: https://chromium-review.googlesource.com/235922
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9720
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch activates the chip driver for Winbond SPI flash (which,
incidentally, looks 99.9% the same as the Gigadevice driver but still
requires some extra 500+ bytes of object code... there's definitely room
for improvement here). Shuffle around rk3288 memlayout to make a little
more room in the bootblock.
BRANCH=veyron
BUG=chrome-os-partner:34176
TEST=Booted Pinky. Checked bootblock and verstage memsz of final binary
and noticed that both only have less than 500 bytes left against their
memlayout boundary. The next piece of code we add will cause some
serious headaches...
Change-Id: I97ea6ac334104e4219e310afc557c164b2ff19d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8769e5a34ad3cd417132646fbb58ff51c29fb640
Original-Change-Id: Id2f1204c30aa28251cf85cb80d7ca44947388dba
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236977
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9719
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
we use the delay 200ms to meet the edp power timing request before,
it waste time, so we use the HPD function to detect the edp panel now.
In previous version, the hardware may not support the edp HPD function,
so in the code it will spend 200ms to detect hpd single, if it don't get
the hpd single, it will contiue the edp initialization process, to compatible
all of the hardware version.
BUG=chrome-os-partner:35623
TEST=Boot from Mighty, and display normal
BRANCH=None
Change-Id: I82c6a80e37fa42eef3521e6ebbf190d7e80fcece
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7a5343eb9af12cae9a15284217762a91ae24bac6
Original-Change-Id: I21c0ef6ce4643e90a192d8b86659264895b5fda9
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/242792
Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: http://review.coreboot.org/9659
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
backlight timing: LED_VCC->LED_PWM->LED_EN, we modify the
code to meet the timing.
BUG=chrome-os-partner:36201
TEST=Boot from jerry, and scope the backlight timing
BRANCH=None
Change-Id: I6bfa6af176400086e4af0112a63127c1152ca70e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 52ac0b2944cea7dc860bfea12fe44851436bb7f7
Original-Change-Id: I6c53a822410ad706383c6d9fa2b5f0437775f710
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/244639
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The recovery button on Rialto should be GPIO 255, the LED Push Key.
Note we want to keep the recovery button on servo functional because
many protos are not assembled and developers can't "push" the push key.
The GPIO passed to payloads (and kernel) is only mapped to Push Key.
BUG=none
TEST=emerge-veyron_rialto coreboot chromeos-bootimage
BRANCH=veyron_rialto
Change-Id: I66f94cf232caa53a3b28db517620e4b6e9b9af0e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66ee55f6312efaeb337eb2881cd5eff5365b4105
Original-Change-Id: I0a7ebeed6506fbd938084c9a078a7cf1c7b914b9
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/244515
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9657
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The FMAP for Rialto has no ecrwhash and would cause verstage to
incorrectly load ramstage (instead of romstage) when looking for
subsection inside RW blob.
We have to override the index of stages to boot correctly.
BRANCH=veyron_rialto
BUG=none
TEST=emerge-veyron_rialto coreboot chromeos-bootimage
Boots successfully on Rialto boards.
Change-Id: I031703d97a68e42dc17630ab5df85f8cba47e5e5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 24ba4b16b4a2fe5469296f8d40286ed926cefc3c
Original-Change-Id: I637ea23e1e8265781e52367d1306dbf854c2ccad
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/244577
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9656
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BRANCH=None
TEST=Build speedy, pinky, mighty
BUG=None
Change-Id: If561872274bcdc2652c2bfe80cf5bd0501ad6b64
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e6be62b4e64b13e285eb0480fdc65d814c6dadc0
Original-Change-Id: I7c97d54f3a4c94f7e23d3e85b808cd64b1cacec7
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241939
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9651
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
K4B4G1646Q-HYK0 is a variant of K4B4G1646D-BYK0 with
a different physical package and the same config parameters.
BRANCH=none
BUG=chrome-os-partner:34940
TEST=boot on Jerry board with K4B4G1646Q-HYK0
Change-Id: I485eede309850ef6b3a52e2a548b6b032d281293
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e925d784e1ebe444f5a5bcab47c8a661b0c6c527
Original-Change-Id: I31bcb348a45ff76e8e08127063bd0d04443ccb79
Original-Signed-off-by: Paul Ma <magf@bitland.com.cn>
Original-Reviewed-on: https://chromium-review.googlesource.com/241787
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9650
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BRANCH=None
TEST=Boot and run jerry rev2 board
BUG=None
Change-Id: I95ec99e444c9cff3008bac5d1e6c3365fc2229a0
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f9075e6172d1ae503dc26bac8f1057455dc93c39
Original-Change-Id: Ice60a4576c9eb386599a545c1b8d470e8a2eed68
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236500
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Paul Ma <magf@bitland.com.cn>
Original-Tested-by: Paul Ma <magf@bitland.com.cn>
Reviewed-on: http://review.coreboot.org/9635
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Derived from of veyron_brain with new memory configuration.
BUG=chrome-os-partner:35072
TEST=built and boot on rialto-rev0 boards.
BRANCH=veyron
Change-Id: I2c6f74d231e39de76ef2399fdb20efae977b34fa
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 17d66e5f58562427badd6973ebb053f58573c040
Original-Change-Id: I8626ff5da8098ca120481b8cda0c6703f806711e
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/238946
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9649
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch finds the RPM image in the CBFS, loads it as defined by the
MBN header and signals to the RPM processor where the image is
located and waits for confirmation of the RPM starting.
The interactions with the RPM processor are copied as is from the
vendor provided sample code.
Debug messages added to help identify problems with loading the blobs,
should they ever happen.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=ramstage reports both TZBSP and RPM starting.
Change-Id: I81e86684f9d1b614f2059ee82c6561f9484605de
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bbf2eda04a6e72b4f7b780f493b5a1cea0abfeb7
Original-Change-Id: Ic10af0744574c0eca9b5ab7567808c1b8d7fe0c2
Original-Signed-off-by: Vikas Das <vdas@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236661
Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Reviewed-on: http://review.coreboot.org/9692
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the apps processor watchdog reset to do a hard reset.
The watchdog reset drives the RESETOUT on the chip.
Modify register address definitions to be able to use pointers and
pointer arithmetics.
BRANCH=storm
BUG=chrome-os-partner:34334
TEST=the chip resets and the control returns to start of SBL.
Change-Id: Ib5772ab152b27058fde1be9de2d2ac26bfe00ca4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d50413cb614ef05ada93be1252fe5ef617a94d91
Original-Change-Id: I9b249d057b473429335587f7241ca462b4a6a8b7
Original-Signed-off-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236141
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9691
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Read the TZBSP blob from CBFS and run it. A side effect of the blob
execution is switching the processor into User mode.
Starting TZBSP requires processor running in Supervisor mode, TZBSP
code is compiled for ARM. Coreboot is executing in System mode and is
compiled for Thumb. An assembler wrapper switches the execution mode
and interfaces between Thumb and ARM modes.
BUG=chrome-os-partner:34161
BRANCH=Storm
TEST=manual
With the preceeding patches the system successfully loads to
depthcharge in recovery mode.
Change-Id: I812b5cef95ba5562a005e005162d6391e502ecf8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7065cf3d17964a1d9038ec8906b469a08a79c6e2
Original-Change-Id: Ib14dbcbcbe489b595f4247d489d50f76a0e65948
Original-Signed-off-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9690
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Memory needs to be initialized before rombase proceeds.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=boots into depthcharge
Change-Id: Id16b17685ff15c2a69d630eb8042e15549ae8b21
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e8aeb38206b806d5656052d0f210faa769e28b8
Original-Change-Id: I0616c7dc7f08332ac0d96d4baf2618b067606fdf
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234544
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9689
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Read two blobs from CBFS: cdt.mbn (memory configuration descriptor)
and ddr.mbn (actual memory initialization code).
Pointer to CDT which starts right above the MBN header is passed to
the memory initialization routine. Zero return value means memory
initialization succeeded.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=with upcoming patches memory initialization succeeds.
Change-Id: Ia0903dc4446c03f7f0dc3f4cc3a34e90a8064afc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1d79dadd7d47dd6d01e031bc77810c9e85dd854b
Original-Change-Id: Ib5a7e4fe0eb24a7bd090ec3553c57cd1b7e41512
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234644
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9686
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this change ports i2c and other relevant drivers from depthcharge for ipq806x.
BUG=chrome-os-partner:33647
BRANCH=ToT
TEST=Booted storm using vboot2
Change-Id: I3d9a431aa8adb9b91dbccdf031647dfadbafc24c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a0c615d0a49fd9c0ffa231353800882fff6ab90b
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Id7cc3932ed4ae54f46336aaebde35e84125ebebd
Original-Reviewed-on: https://chromium-review.googlesource.com/229428
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9685
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change sets up the list of source files for vboot2's
verstage without enabling it.
BRANCH=storm
BUG=chrome-os-partner:34161
TEST=not much testing yet, just successful compilation.
Change-Id: I4052c20795459bf0e057c0f0952226ea4a8c89f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 48847ab8acfbe4b33d61d3d012c72c025cd8f364
Original-Change-Id: I1d7944e681f8a4b113a90ac028a0faba4423be89
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234643
Reviewed-on: http://review.coreboot.org/9684
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The gpio access code has been moved to a separate file to match other
platforms. Accessor functions are added to read different switches
state. They will be read by verstage, when it is enabled, and by
ramstage, for passing the values to depthcharge.
It is unfortunate that the gpio values are not being cached and can
change by the time CBMEM table is filled, but we have to live with
that for now.
BUG=chrome-os-partner:33756,chrome-os-partner:34161
BRANCH=storm
TEST=none yet.
Change-Id: I229fed0e35d643912f929671d5fc25aee5d1d167
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e15aa281a1dbf2c463650b6c04991436022d8d4
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I940b54cd3cf046b94d57d59d370e634a70a8bbeb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229426
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9681
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds a new "backlight" output GPIO to the coreboot table in
order to avoid redundantly defining that GPIO in the payload.
BRANCH=veyron
BUG=chrome-os-partner:34713
TEST=Tested together with corresponding depthcharge CL.
Change-Id: Ia997beb1a400136ad65d8f0217781c9782f6e8a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 04ce4c23573cf926aeef3d817d3ab00835f897c7
Original-Change-Id: I69b3c7ac6be4b9723b6a0dfecef5e1c4ea681aff
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242400
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9652
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
LDO4 and LDO5 are not turned on with the boot0 and boot1 RK808
strappings that we use on Brain.
BUG=none
BRANCH=none
TEST=built and booted on brain
Change-Id: I00393ca54958d9fff926606405edcd84901e4048
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c4c1862585fd058a8a9c8237c701b3bbf3b8aa83
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I846ef9d67a780cc07414d545524b9ec0b8490cf1
Original-Reviewed-on: https://chromium-review.googlesource.com/241734
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9648
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Danger has EDP, the original code was copied from Brain which
didn't.
BUG=none
BRANCH=none
TEST=built and booted on danger
Change-Id: Ib8e48078cc51fe0e1fb7049f70e810b8f0a7690a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 25fc6b4d82fb4bd80798cc809af4dacc6208109e
Original-Change-Id: Ic8b3f685e08bb96125c57d42db6a10e348a1a096
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245161
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9679
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This applies the differences between Brain and Danger:
- Danger has an SDMMC slot
- Danger has a USB hub (TODO)
- Danger has LVDS (TODO)
- Add workaround for incorrect RAM_ID strapping
BUG=none
BRANCH=none
TEST=emerge-veyron_danger coreboot works
Change-Id: Idec527744de2583613b290e3e88850b33ff1c23d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 89278c2eeae4bae989a3549da627c5bbd5dd0d5a
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Iae3f85d4f41e04465a5046f2334c693337d006a4
Original-Reviewed-on: https://chromium-review.googlesource.com/241712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9647
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This adds a directory with files copied over from Brain along with
build-related changes so that emerge-veyron_danger works. The next
patch will account for other differences.
BUG=none
BRANCH=none
TEST=emerge-veyron_danger coreboot works
Change-Id: I7ebd431cd48e257dfa761d32013d0e251b4f155d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a0f7d2f96540df6fdcd7a99d9e0fa02bbc6c1f73
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id265a7715f07a647a449f00097bf40f7c9b4c068
Original-Reviewed-on: https://chromium-review.googlesource.com/241711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9646
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This moves PMIC_BUS from each mainboard's board.h file to a per-
mainboard Kconfig variable. To prevent humans from forgetting to
set a valid value, an invalid default is set in the rk3288 Kconfig
and checked in rk808.c so that compilation will fail if the mainboard
Kconfig does not override it.
Originally, PMIC_BUS was only used by mainboard code as an argument
to RK808 PMIC functions. To conform to the generic RTC API, however,
the RK808 code needs to have the bus number globally defined somewhere
since the rtc_get() and rtc_set() functions don't take any args.
Since CONFIG_PMIC_BUS is globally visible, we no longer need to pass
bus number to the PMIC functions.
BUG=chrome-os-partner:34436
BRANCH=none
TEST=built and booted on Pinky
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I73783878e507b2e7b1526dd2f81cfbdf8f1e2a55
Reviewed-on: https://chromium-review.googlesource.com/240203
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9642
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BRANCH=None
TEST=emerge-veyron_speedy coreboot
BUG=None
Change-Id: Iab377e93472db0b7778df020afa84ee97f0e4079
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fedf6ed7dc220d58ad10d49ac9ea02443746e77e
Original-Change-Id: Id5024bfd32a0aa1fb00f3af8dc337ccccaf40729
Original-Signed-off-by: Jiazi Yang <Tomato_Yang@asus.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/237544
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Trybot-Ready: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9640
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
TEST=emerge veyron_speedy and boot the Speedy board
BRANCH=None
Change-Id: Ida5fd6d839a2e704760a90e9c723c1b688ea6a84
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 42c0d11c3ec65874986c06ca4d7b34f5987f9409
Original-Change-Id: I2f0cff74517a8c031eabb64f4f82d455195c8dd1
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234715
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9639
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This applies the differences between Jerry and Brain:
- No EC
- No SD card
- Minor changes to GPIOs (no lid, power button active low)
- No variations between board IDs (yet)
- No backlight/display attached, but we do have some HDMI
and VOP configuration (need to double check that it's right).
BUG=none
BRANCH=none
TEST=built and booted on Brain (requires follow-up CL
to get into depthcharge)
Change-Id: Idbbc19856e05a145637c28d87c3e19855d13f03b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 67151129c28ca7dd83464e5a5c183d006299293c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3c761d3d4d186a6208a772c05193bdcbd4a5c105
Original-Reviewed-on: https://chromium-review.googlesource.com/235921
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9638
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This adds a directory with files copied over from Jerry, in addition to
build system related changes (configs/* and Kconfig stuff) necessary
to emerge-veyron_brain coreboot.
The next patch will account for differences between Jerry and Brain.
BUG=none
BRANCH=none
TEST=emerge-veyron_brain coreboot works
Change-Id: Ib0da9caf80f46991b96bcb5756f807237f0902e1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 9509d6277dae25a78062c1301054a39f704b33fe
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I972f2623d9b0a43e3ea5312b3c4cd34ab44edc36
Original-Reviewed-on: https://chromium-review.googlesource.com/236989
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9637
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This BCT table is the same as "ramcode == 1", and has been pass the stress
test with this new Micron type.
-Micron MT41K256M16LY-107:N, ramcode = 4
BUG=chrome-os-partner:32071
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: I80990fec6faf5dd2b8090658d865cc8dde31b753
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bce2bf1fd518077e06d70d78a65d58ddef7b7bc6
Original-Change-Id: I2c0b28fdafb5299784519e641aa4edb53d0c36b2
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/236514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Due to a missing i2c_init(), we were actually running our TPM with
default divisors at 660KHz. Oops.
While it's commendable that both the TPM and our controller seem to have
been running fine all this time at more than 1.5 times the maximum
frequency they support, we should probably still get that fixed.
Also sync Speedy back up to the other Veyron boards since it seems to
have missed a recent SDMMC patch.
BRANCH=None
BUG=None
TEST=Booted Pinky.
Change-Id: I255c66624b21bf48b12f950208ba2c401a75c4e4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f2bd7c8579cd90d2f800c777c1981557d81a9b49
Original-Change-Id: I43e6b5fe02aca605a5b243c5b876bd44b90b2bf9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236580
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9634
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This switches all the rk3288 platforms to use the common CBFS wrapper
instead of implementing its own CBFS media driver. It also happens
that veyron_* platforms use Gigadevice SPI flash (at least for now).
As we use more SPI-related stuff, for example eventlog and vboot data in
Brain's case, we will need to use more of the SPI API anyway. This
prevents us from having to duplicate pieces of it for rk3288.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: Ie462456814646fdc277485d9e2d8c901fd4936e7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2d6df2fe6d78bc8eee8689019b9aaf29c82b6b30
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id307bd5fb6cc8f79411d8c66e1370e80c58d017b
Original-Reviewed-on: https://chromium-review.googlesource.com/235882
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9678
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=None
TEST=emerge veyron_mighty and boot the Mighty board
BRANCH=None
Change-Id: I0047569c9eed7a3881500ba3b05e6726ba8d7b8f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 49366e5bb3ecdec38c898c936392e5d77a91cd53
Original-Change-Id: I3fcdc837e8d7e62c145850f549662d8260aa1120
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234714
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9633
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
TEST=emerge veyron_jerry and boot the Jerry board
BRANCH=None
Change-Id: I38cb0106694ada431e6ab6194fce7ba1822bcbcf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6a061072860f74874f0098062806c01bdcb447bd
Original-Change-Id: I6eb0900516bcd95159c472749c54d356448d2344
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234713
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9632
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
TEST=emerge veyron_pinky and boot the Pinky board
BRANCH=None
Change-Id: I75bc1b7681c9a3d7dc2868a2b260884538587dbd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 66069927618924af02a4e17503fa49ae2c31fdfc
Original-Change-Id: I06242ade0cabbba56b16b3832a1b4b09bec6f06b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234712
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9631
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
We use the devicetree to pass the backlight control gpio before,
but if there have different board version, and it uses different
io to control backlight, it will hard to distinguish it. So, we
move the backlight control to mainboard, and use board_id
to distinguish the backlight control.
BUG=None
TEST=emerge veyron_pinky and Boot the pinky board
BRANCH=None
Change-Id: Ifa81eb2455296f4b4285b681208f4393f266fb34
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2ff7f65134dcf97f97757750eab41dcf8c7765d3
Original-Change-Id: I1ec8e04f4982c3a8c7e31d8dc2c75311b7199ffc
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234711
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9630
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Like Nyan, Veyron boards use a GPIO to reset the system so that we can
make the accompanying TPM reset secure and unforgeable. The normal
kernel reboot driver knows that, but the SoC-internal watchdog doesn't.
This patch implements a check for the global reset status register in
the early bootblock and triggers a hard_reset() when it matches "first
global watchdog reset" or "second global watchdog reset". Seems that
the difference between the two is is a choice controlled by
wdt_glb_srst_ctrl (unconfirmed), and we want this code to run in both
cases.
BRANCH=None
BUG=chrome-os-partner:33141
TEST=Run 'mem w 0xff800000 0x9' from the command line, watch how you end
up in recovery without this patch but can boot normally with it.
Change-Id: Ice79648831e1e97d22325711da9e82bbf6bf3c75
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5d7cb52b2c2dcb2fff0bf83fc168439dade4b1b7
Original-Change-Id: I2581bde84f0445c15896060544e9acb60de91c8c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231734
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9629
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Add the Samsung-4GB and Hynix-4GB LPDDR inc files.
Use ram_id 1000 correspond to Samsung-4GB LPDDR
and use ram_id 1001 correspond to Hynix-4GB LPDDR.
BUG=chrome-os-partner:33269
TEST=Boot veyron_speedy normal
BRANCH=None
Change-Id: I21983c48e1e99aa70ae9bb3fb6550ae9af472015
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d34b19dc9b57b4f31dc1b28581f3f8fc0fcc7e6b
Original-Change-Id: I55b6968c642df8c1f579e518232ab5d278e7e12f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233859
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9628
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Essentially a copy of veyron_jerry for now
BUG=chrome-os-partner:33269
TEST=emerge-veyron_speedy coreboot
BRANCH=None
Change-Id: If8f32122e301df1766bca68b11efd8afe8be5e87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: f49a151e1dd956ed2cf3ba0b1f9307442b61e639
Original-Change-Id: Ife457db4fd67fe69bcd4082694b3372eccfb304b
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233822
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9627
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The only way to reliably reset an SD card in an unknown state is by
power-cycling. Since a kernel may crash and reboot at any point, SD
cards may be left in one of them fancy high-throughput modes that
depthcharge (or, in fact, a newly booting kernel without prior
knowledge) doesn't support, so we need to reset the card on every boot.
This patch adds support to turn off an RK808 regulator completely and
uses that to turn off SD card power rails in early romstage. The time
until configure_sdmmc() in ramstage turns them back on should be more
than enough to drain the power rail for an effective power-cycle.
BRANCH=None
BUG=chrome-os-partner:34289
TEST=Booted a Pinky from SD card, noticed that it works before and
after this patch.
Change-Id: Iaa5f7adaa59da69a964785c5e369ad73c6620224
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 95fba21907f1f3f686cb5a95b993736247db8f96
Original-Change-Id: I904b2d23ca35f765c000f9bee7637044f674eff9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233713
Original-Reviewed-by: Alexandru Stan <amstan@chromium.org>
Original-Tested-by: Alexandru Stan <amstan@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9626
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The ethernet switch, as soon as it is taken out of reset comes up in
default (bridging) mode, which allows traffic to flow freely across
the ports.
Let's keep it in reset such that there is no cross port traffic
happening while the device boots up.
BRANCH=storm
BUG=chrome-os-partner:32646
TEST=verified that the switch is held in reset during boot.
Change-Id: Ia1dbb47d892d564145da17425a596bf9bad40d29
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50551d8c9a44d1b63e0948070f6573adf7729d37
Original-Change-Id: I6bf698beddc98ce18fee6b3b39622e356c8cfbad
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224989
Original-Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Reviewed-on: http://review.coreboot.org/9465
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This adds the TPM device to the devicetree and configures an
active high edge triggered interrupt at IRQ10 and adds the ACPI
Device for the TPM into the DSDT.
It also cleans up the EC PNP ID to use the EISAID for an EC since
there are now two PNP devices declared, and removes the unused
ENABLE_TPM define at the top of the DSDT.
BUG=chrome-os-partner:33385
BRANCH=samus
TEST=build and boot on samus, ensure TPM is functional at IRQ10
CQ-DEPEND=CL:226661
Change-Id: I4b9b016014d136fbf9a37003003632821ae93a53
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0420e27b05d0f1568efa9beb849e0e8ff5995c86
Original-Change-Id: I2660cb30ac535da0b255603a619b9c09681ca947
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226663
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9471
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since CL:226662, all TPMP accessing should be removed as well,
else it will cause wtm2 coreboot failed on build.
BUG=none
BRANCH=none
TEST=./setup_board --board=fox_wtm2 && emerge-fox_wtm2 coreboot
CQ-DEPEND=CL:226662
Change-Id: Ib25f2d32997ef82b0ebf049803f2c5002a0a3abf
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c99456bf42544518e2a36b6e0bbfe7f4ee1b4aff
Original-Change-Id: Ia0eebb1924bbb23979c880f7d05600a0cf1e4ca3
Original-Signed-off-by: Harry Pan <harry.pan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/232165
Original-Reviewed-by: Wei Shun Chang <wei.shun.chang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9477
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This change is made only to make sure there is a good
signal strength on the SPIM lines.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: I5b9427b14a407746fb5b707fa3b07a1a6774bfb1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e9d953283a5b43bf967128ca73db0e90c2df32df
Original-Change-Id: Ia589134cf0557613697d49fb0bdb1848af66f0e8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/249732
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9675
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: Ic805311d3aaf40da601c88cd05a73254088374bd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: ad9427c069ed34ab91e93df59ec3361499b54982
Original-Change-Id: If8e142273afd2d591a975f4e7e34aa73e8d71b0c
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250451
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9674
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current MIPS PLL is configured in such a way that there is
excessive jitter. Correct this by applying new PLL settings. The
resultant frequency is 546MHz instead of 550MHz.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board as part of the JTAG
loading script;
BRANCH=none
Change-Id: Ica1bfff29e01819b86cd2bb8b18d8adc9dfa3260
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0c04354b49b73d234492521d81b6600d487175b0
Original-Change-Id: I28b41b1e82dbdf9da21bf0ab74f9722cdad923f1
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/245620
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: http://review.coreboot.org/9671
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; works properly
BRANCH=none
Change-Id: Ie386d6af9eeba7a72b1b88d515e6cb1821569c6b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d4b8d8b6f965296f9ecf62da8e5f383c3667b077
Original-Change-Id: I9eb464340b0475ae735ba5573ab0841dac0d74eb
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243215
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9669
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:31438
TEST=tested in Pistachio bring up board; previous delay
at the beginning of bootblock is fixed.
BRANCH=none
Change-Id: I30335677c96bfd651bc49e36b562c48588009d67
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3d1eb117644af1323dd940e0a82a2ef44025d5b9
Original-Change-Id: I122df1f985163836bb2ddd027ef6ab2ce265d5dd
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/243223
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9668
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set elements:
- UART1 clock dividers and MFIOs
- SPIM1 clock dividers and MFIOs
- USB clock dividers
- System clock divider
- System PLL
- MIPS CPU PLL
BUG=chrome-os-partner:31438
TEST=tested on Pisachio bring up board; UART, SPI NOR, SPI NAND, and USB
have proper functionality.
BRANCH=none
Change-Id: Ib01186a652fd59295a4cafc3ca99b94aa9564f74
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 65e68d82f34bb40ef3cfb397ecf5df0c83201151
Original-Change-Id: Ia2c31bbbfc020dc4fd71c72b877414adfdfc42a8
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241423
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9662
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush
Change-Id: I9c2235ccc5571f1919dc013c62488390fe31dcbc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7468c14842c680be81620ad3fd2ea9ae056d525f
Original-Change-Id: Iaf7f70727fc914b9bb2d063c9a30ece4451d40da
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238942
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9613
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
DP panel parameters generally can be retrieved thru edid. The parameters
specified here will be used when edid fetching failed.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush and ryu
Change-Id: I39e25c873561f75394408f6635aaa2e88b67d846
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c02facb9753de08f66f3ae40d7dca1eba50febc5
Original-Change-Id: I4785eca3ec03b48e8780ebf02389e9b46317e96d
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/238941
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9612
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have known for a while that the old x86 model of calling init_timer()
in ramstage doesn't make sense on other archs (and is questionable in
general), and finally removed it with CL:219719. However, now timer
initialization is completely buried in the platform code, and it's hard
to ensure it is done in time to set up timestamps. For three out of four
non-x86 SoC vendors we have brought up for now, the timers need some
kind of SoC-specific initialization.
This patch reintroduces init_timer() as a weak function that can be
overridden by platform code. The call in ramstage is restricted to x86
(and should probably eventually be removed from there as well), and
other archs should call them at the earliest reasonable point in their
bootblock. (Only changing arm for now since arm64 and mips bootblocks
are still in very early state and should sync up to features in arm once
their requirements are better understood.) This allows us to move
timestamp_init() into arch code, so that we can rely on timestamps
being available at a well-defined point and initialize our base value as
early as possible. (Platforms who know that their timers start at zero
can still safely call timestamp_init(0) again from platform code.)
BRANCH=None
BUG=None
TEST=Booted Pinky, Blaze and Storm, compiled Daisy and Pit.
Change-Id: I1b064ba3831c0c5b7965b1d88a6f4a590789c891
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ffaebcd3785c4ce998ac1536e9fdd46ce3f52bfa
Original-Change-Id: Iece1614b7442d4fa9ca981010e1c8497bdea308d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234062
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9606
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some projects (like ChromeOS) put more content than described by CBFS
onto their image. For top-aligned images (read: x86), this has
traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the
area actually managed by CBFS, as opposed to ROM_SIZE) that is used to
calculate the CBFS entry start offset. On bottom-aligned boards, many
define a fake (smaller) ROM_SIZE for only the CBFS part, which is not
consistently done and can be an issue because ROM_SIZE is expected to be
a power of two.
This patch changes all non-x86 boards to describe their actual
(physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a
mainboard Kconfig select (which is the correct place to declare
unchangeable physical properties of the board). It also changes the
cbfstool create invocation to use CBFS_SIZE as the -s parameter for
those architectures, which defaults to ROM_SIZE but gets overridden for
special use cases like ChromeOS. This has the advantage that cbfstool
has a consistent idea of where the area it is responsible for ends,
which offers better bounds-checking and is needed for a subsequent fix.
Also change the FMAP offset to default to right behind the (now
consistently known) CBFS region for non-x86 boards, which has emerged as
a de-facto standard on those architectures and allows us to reduce the
amount of custom configuration. In the future, the nightmare that is
ChromeOS's image build system could be redesigned to enforce this
automatically, and also confirm that it doesn't overwrite any space used
by CBFS (which is now consistently defined as the file size of
coreboot.rom on non-x86).
CQ-DEPEND=CL:231576,CL:231475
BRANCH=None
BUG=chromium:422501
TEST=Built and booted on Veyron_Pinky.
Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71
Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9619
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Commit 257aaee9e3a (arm: Add bootblock_mainboard_early_init() for
pre-console initialization) inadvertently moved the timer initialization
after console initialization for IPQ806x, which is apparently not a good
idea for this platform. This patch solves the issue by moving
init_timer() to bootblock_mainboard_early_init(), which is the new hook
explicitly provided to perform pre-console tasks.
BRANCH=None
BUG=None
TEST=Built and booted Storm with 257aaee9e reverted. Noticed that it was
already broken. Bisected coreboot and tracked down breakage to commit
a126a62f (ipq8064: use the new utility to build bootblock). Built and
booted successfully with this patch and a revert of a126a62f to confirm
that the bug in question here is fixed.
Change-Id: I4a3faa2aec8ff1fbbe6c389f1d048475aa944418
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 752d1f879f9bd841f18bd84842491f747458cf52
Original-Change-Id: Ie4aa2d06cb6fda6d5ff8dd5ea052257fb7b8a24b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/233290
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9574
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
this is required to do early firmware selection using vboot2. actual
implementation can be done later.
BUG=chrome-os-partner:33755
BRANCH=ToT
TEST=Booted storm.
Change-Id: I8e9e168ea6fa3af149d5ad4ca51c5c9bba4d986d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 611c24773478c8c212d567bb4f2cb9a09898ddc8
Original-Change-Id: Idd1a1de4991a19902ffe45f01be89d47f4413779
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229425
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9581
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch uses the new bootblock_mainboard_early_init() hook to run the
UART pinmuxing on rk3288-based boards before initializing the console.
This allows us to get rid of the hacky second console_init() call in
bootblock_soc_init(). We can also simplify the pinmux selection a bit
since we know that a given board always uses the same UART (still keep
an assert around to be sure, though).
BRANCH=None
BUG=chrome-os-partner:32123
TEST=Booted on Pinky.
Change-Id: I3da8b0e4bd609f33cedd934ce51cb20b1190024b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: caabda8fc1ddb4805d86fd9a0d5d2f3cf738bfaf
Original-Change-Id: Ia56c0599a15f966d087ca39181bfe23abd262e72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231942
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9604
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On most platforms, enabling the console and exception handlers are
amongst the very first things you want to do, as they help you see
what's going on and debug errors in other early init code. However, most
ARM boards require some small amount of board-specific initialization
(pinmuxing, maybe clocks) to get the UART running, which is why
bootblock_mainboard_init() (and with it almost all of the actual
bootblock code) always had to run before console initialization for now.
This patch introduces an explicit bootblock_mainboard_early_init() hook
for only that part of initialization that absolutely needs to run before
console output. The other two hooks for SoC and mainboard are moved
below console_init(). This model has already proven its worth before in
the tegra124 and tegra132 custom bootblocks.
BRANCH=None
BUG=chrome-os-partner:32123
TEST=Booted on Pinky. Compiled for Daisy, Storm and Ryu.
Change-Id: I510c58189faf0c08c740bcc3b5a654f81f892464
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f58e84a2fc1c9951e9c4c65cdec1dbeb6a20d597
Original-Change-Id: I4257b5a8807595140e8c973ca04e68ea8630bf9a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231941
Reviewed-on: http://review.coreboot.org/9603
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Select DO_SOR_INIT to enable dp display api
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: Iddf19195722856865a7c06ce96492012ab729184
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 31492f51c030aeb7a3ac792a02665642ec999405
Original-Change-Id: I4daca43239235ca6d233c4457096d3b98fcaf65c
Original-Reviewed-on: https://chromium-review.googlesource.com/234274
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-on: http://review.coreboot.org/9586
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable display supporting functions by select DO_DSI_INIT
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and rush
Change-Id: Ie0e03506702ddab03d7f3fd2528c67c02126c7be
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7133dfcd1afa221be92c6398221cf210d9eddf17
Original-Change-Id: I3a9f93107333ebf83ff235eb1b1e02fc747df3c6
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234272
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9585
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Display configuration is board specific. The change here is preparing
for supporting other than dsi interface.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and test dev/rec mode, also build rush ok
Change-Id: Ied39d5d539d2be4983ab70976bffbe51fccba276
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 36be6b2e35c6246d5384d71b9ab9d4ddbf17764a
Original-Change-Id: I494a04f7d6c0dbad2d472f4c2cd0aabfb23b8c97
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234271
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9584
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
dc supporting functions can be used for other than dsi display
interfaces. This change is preparing for supporting sor display
interface.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build ryu and test dev/rec mode, also build rush ok
Change-Id: I8a310e188fae70d7726c4360894b392c4546e105
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a7ab7225e3419a0fd93894dbb9a959390f29945b
Original-Change-Id: Id14cbd89457cb91c23526927a432f4eb7cc6291b
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/234270
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9583
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This configures I2S1 and the codec MCLK muxes to pass the PCM
audio data to the RT5677 codec. Once depthcharge RT5677 codec
driver changes are in, audio 'beeps' should be heard on boot
(Ctrl-U / devmode/recmode).
BUG=chrome-os-partner:32582
BRANCH=none
TEST=Built and booted Ryu/A44.
Change-Id: I2143d544c75ee7e03ffc809561171920650e8d7d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 600c12ddf3543d2dcb47fd3e2f0704803dac5957
Original-Change-Id: Ib071bcb41fba8f6d628a386ed233ec84a54b0323
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233945
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9580
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With this change, audio 'beeps' are heard on boot if Ctrl-U is
pressed, or devmode/recmode is entered. I also tested via an
explicit call to VbExBeep in the kernel boot path. Note that
a couple of Rush CLs for depthcharge are needed for audio, too.
BUG=chrome-os-partner:32582
BRANCH=none
TEST=as above. Built and booted Rush/Norrin64.
Change-Id: I43c65a4d11c5ab7b16289e19f3b42cfc0300ea7c
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4a682fb2403f7c6d53e74bfa945481242577f6c3
Original-Change-Id: Ia37f077569afd806ce6574c4c58813fd7aca1644
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233671
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Due to CL https://chromium-review.googlesource.com/231250,
depthcharge now detects gpio state based on gpio configurations
done by coreboot instead of redoing configuration at
depthcharge. However, PWR button and LID open pins have not
been configured in coreboot. So, add the missing code here.
Otherwise, TOT coreboot/depthcharge rush build can not load
in kernel.
BUG=chrome-os-partner:34336
BRANCH=none
TEST=build rush and test with pwr button press and lid switch
Change-Id: I7acc5e021fa769f68d4cbfd7202df325d4ea73c2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a25dff24a2dcd33fcd15eb766432414af215c3ab
Original-Change-Id: I6c322cd987967920f236aae653294db079678408
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/233322
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9575
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This CL makes slight changes to the ChromeOS-specific GPIO definitions
of Tegra and Rockchip boards to prepare them for new features in
depthcharge. It adds descriptions for the EC in RW and reset GPIOs,
changes the value Tegra writes into the (previously unused) 'port' field
to describe the complete GPIO information, and removes code to sample
some GPIOs that don't need to be sampled at coreboot time (to help
depthcharge detect errors and avoid using a stale value for something
that should always represent the current state).
BRANCH=None
BUG=None
TEST=None (tested together with depthcharge patches)
Change-Id: I3774979dbe7cacce4932c85810596d80e5664028
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: df295d0432fbf623597cf36ebb170bd4f63ee08d
Original-Change-Id: I36bb16c8d931f862bf12a5b862b10cf18d738ddd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231222
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9570
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The information about the DMA memory area is further passed
through the coreboot table to the payload.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio FPGA; DMA memory area was used to test the
functionality of the DWC2 USB controller driver; behavior was
as expected.
BRANCH=none
Change-Id: I658e32352bd5fab493ffe15ad9340e19d02fd133
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0debc105b072a37e2a8ae4098a9634d841191d0a
Original-Change-Id: Icf69835dc6a385a59d30092be4ac69bc80245336
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/235910
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9593
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Essentially a copy of veyron_jerry for now.
BUG=chrome-os-partner:33269
TEST=build
Change-Id: Ie2d115d57fe4b6359fa6bb16a2e85e88ec99e991
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9ec25b9cf2985786e55f0b85c3849ccbd42bddd4
Original-Change-Id: Icc45c8f8bf9f6916ba7187dde277d15cc60df8a2
Original-Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230961
Original-Commit-Id: 407b8b74a068220d8051dd0d85d9c4ec3ea14d51
Original-Change-Id: I546dbc41ccd191159e96b851424fcb37902a57ec
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231691
Reviewed-on: http://review.coreboot.org/9554
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Implement VOP and eDP drivers, vop and edp clock configuration,
framebuffer allocation and display configuration logic.
The eDP driver reads panel EDID to determine panel dimensions
and the pixel clock used by the VOP.
The pixel clock is generating using the NPLL.
BUG=chrome-os-partner:31897
TEST=Booted Veyron Pinky and display normal
BRANCH=None
Change-Id: I01b5c347a3433a108806aec61aa3a875cab8c129
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e4f863b0b57f2f5293ea8015db86cf7f8acc5853
Original-Change-Id: I61214f55e96bc1dcda9b0f700e5db11e49e5e533
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9553
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Like most newer Chromebooks, Pinky and Jerry do not have physical
dev switches.
BUG=chrome-os-partner:33395
BRANCH=none
TEST=built and booted on Pinky, crossystem prints a valid value for
devsw_cur instead of an error.
Change-Id: If97ffa6f99eb31c05915f3ee82aaf6bd252d29e4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db302d7286d3e7df9442928dac1d611a2c103163
Original-Change-Id: I186518a59699d293c7938221b3ae45b27361c255
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229680
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9552
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds support for Pinky rev3 (board ID 2) and Jerry rev2: the
power button GPIO changed polarity to low, the 5V_DRV pin for USB power
was moved to the AP again (welcome back!), and the EMMC_RST_L is now
finally on a port with the right IO voltage so we don't need any weird
pull-up tricks anymore. Since there are very few Jerry rev1s around,
we'll just move it over to the new code directly without introducing
board ID differences (also, because I have no idea how they stuffed it
this time... is this one actually called rev2?).
BRANCH=None
BUG=None
TEST=Still boots on my Pinky rev2, though that doesn't say much.
Change-Id: Id11044cedcaac5a4ae07e696893823925107a6db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 55344a9518ff04edcef01bcd40817e9e4b613717
Original-Change-Id: Iddee360fbda357ecde4ae5fbb5c3a01fe0c22474
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229010
Original-Reviewed-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9551
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch ports commit 567f616f (rk3288: slowly raise to max cpu
voltage to prevent overshoot) to Veyron_Jerry. It also fixes include
ordering and some comment grammar in the affected code.
BRANCH=None
BUG=chrome-os-partner:32716
TEST=None
Change-Id: I4ac14a38e4b3acc4926d4f51f409ff12d9c841cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 679014bc843788e8d4d5f5c7470ae76f8be5e942
Original-Change-Id: I9c0aba40ddd8a0852391df184034baa740d063df
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228938
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9550
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This enables RAM_CODE_SUPPORT for veyron* platforms and uses the
generic gpio_get_binaries() function to read RAM_ID GPIOs.
BUG=chrome-os-partner:31728
BRANCH=none
TEST=built and booted on pinky
Change-Id: I7a03e42a270bec7036004375d36734bfdfe6e528
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a325b204ff88131dfb0bdd3dfedb3c007cd98010
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ibc4c61687f1c59311cbf6b48371f9a9125dbe115
Original-Reviewed-on: https://chromium-review.googlesource.com/227249
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9549
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This makes board_id() use the generic gpio_base2_value() function
to obtain the value of the board ID straps.
BUG=none
BRANCH=none
TEST=tested on pinky
Change-Id: I15c1310889b989c34638fd342011aef5fe7bcec1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fcbb8a6998a66531326afe16b232395d49fee64d
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I5847bf1c5b26bcaf7d36103f31bb255b31ff8185
Original-Reviewed-on: https://chromium-review.googlesource.com/228370
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
LDO7 (VCC10_LCD_PWREN_H) is essentially just a glorified GPIO that turns
the real VCC10 regulator on or off. We tried setting it to 3.3V since it
matches the VCC33_SYS voltage on the input of that regulator. However,
we didn't notice that the LDO only supports going up to 2.5V.
This patch changes the voltage to the allowed maximum, which should
still work fine as an enable line (and is the same value used by the
kernel). This removes an assertion error in the ramstage.
Also change the PMIC driver to assert maximum VSEL values based on the
LDO, because the lower-voltage ones support one more setting. (LDO3 is
actually listed to only go up to 0b1111 in the manual, and has a weird
jump from 0b1101 -> 2.2V (skipping over 0b1110) to 0b1111 -> 2.5V. I
don't know if that's a documentation error or what they were smoking
when they designed that, but we don't need to care for now.)
BRANCH=None
BUG=None
TEST=Booted on Pinky, no more ASSERTION FAILED.
Change-Id: I38bf99e38822fd0883fd4d0bd9a1b01143545a95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 70f3149efbc3aa9a03ab3fd5be99d17d9c5e1c87
Original-Change-Id: I68a3bb882cf25d98aca8922ede2a17e1ef6524de
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228292
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-by: Jerry Parson <jwp@chromium.org>
Reviewed-on: http://review.coreboot.org/9547
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The veyron_jerry board code was just copied over from veyron_pinky
1-to-1. The Jerry board IDs start at 1, but there has never been a Jerry
rev0 so we can remove the code for board ID 0 from it.
BRANCH=none
BUG=None
TEST=Booted Jerry image on a Pinky rev2, worked fine.
Change-Id: I0f2ffdc577934c1695e8d2dcf71512696ac1d5a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aa36da69ac584b845e15282dae100eec27fc7f12
Original-Change-Id: I45a18b288c8d8b1399ceedf582addcce1c7e857d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228254
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9546
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The eMMC enable pin is in a 3.3V IO domain. Unfortunately the eMMC
expects this pin to be 1.8V. The way we were driving this pin would
cause the eMMC to pull power through this pin and that was causing
current leaks.
In future revisions of hardware we should move this pin somewhere more
legit. However, in the current hardware we can get things working
pretty well by using a pullup to "drive" this pin. This will work in
conjunction with the external 100K pullup to give a somewhat
reasonable voltage. The eMMC will also not be able to pull much
current through this pin, so it can't leak too badly.
BRANCH=none
BUG=chrome-os-partner:33319
TEST=Boot a kernel that doesn't touch the mux/pulls and see no leak:
dut-control --port=${SERVO} vcc_flash_ma -t 5
Change-Id: Ibc25cd090d826c8215be24a0b5c11d97b5281700
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 26e7a9d7e067ed4dd859387ee63bf654ab9dc529
Original-Change-Id: Iadfc1477cd478773cc9d159e3fbc22b66b8f0f78
Original-Signed-off-by: Doug Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226039
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9545
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is essentially a copy of veyron_pinky for now.
BUG=chrome-os-partner:33269
TEST=build and boot
Change-Id: I151c82f54ece4620953d0db5aedf027a3293926f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 267611f2354be4384de3f05d2459a4e421ee6b4f
Original-Change-Id: I0d473361e0850ee3b11da5a809f8396826ccdad6
Original-Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225301
Reviewed-on: http://review.coreboot.org/9544
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Invoke the function which copies WiFi calibration data in a CBMEM
table.
BRANCH=storm
BUG=chrome-os-partner:32611
TEST=verified that the WIFI entry is added to CBMEM when the
calibration data is present in the VPD.
Change-Id: Icab0a2343e88e1d44575eeb608fdf6588aff255b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 68b96f158633cb3a1f157b5a19da39fa7e78f975
Original-Change-Id: I5fa77da98e37b88da01fb7884e713535fc178006
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225272
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9543
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update non-vboot2 memlayout:
1) Add timestamp region
2) Increase ramstage size
3) Change name from memlayout_vboot.ld to memlayout.ld so that any non-vboot
upstream board can also use this layout.
BUG=None
BRANCH=None
TEST=Compiles and boots to kernel prompt on ryu with vboot selected instead of
vboot2.
Change-Id: Idced98f9df7cdbab5f62cd1e382c6046ade1d867
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 20fffa282b20fb32ce2ff687f4479be630f90fcf
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Change-Id: I91accd54efc53ab563a2063b9c6e9390f5dd527f
Original-Reviewed-on: https://chromium-review.googlesource.com/231547
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9536
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
A couple of regs need to be poked to allow audio output
from this part on Ryu P0/P1. It will be replaced by two
non-configurable amps on P3.
BUG=none
BRANCH=none
TEST=Build/flashed on Ryu P1, dumped AD4567 (I2C6 dev 0x34)
regs and confirmed settings.
Change-Id: Ie602b056fb1488546ab233f8f81cfacb96624ebb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 75dabe378b561e939381e2ef5113a2b28bfcedf8
Original-Change-Id: I8999843646927dbd07a179ede973ba5f1eb97167
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/231384
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9532
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Based on TPS65913, the max LDO turn on time is 500us. Since it is requested
the default delay of 500us when calling function pmic_write_reg(), it is
safe to remove this 100ms delay.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: I2cfda38728db223c26f9122b70d37e828921459a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 271b7e95f66f4b8611a0d408e59f428c315074f3
Original-Change-Id: I53aecc273484edfa502231b44f6bcd7f5d8f9331
Original-Reviewed-on: https://chromium-review.googlesource.com/231170
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Reviewed-on: http://review.coreboot.org/9529
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The Ryu RT5677 audio codec uses EXTPERIPH1 clock (12MHz)
for MCLK1, I2S1 for input. AHUB needs all of its child
peripherals taken out of reset and enabled, too.
This just sets up the audio clocks. More work still to
be done in the codec driver, and some kind of stub needs
to be created/hacked to set up the AD4567 speaker amp
regs for mono output on P1.
BUG=chrome-os-partner:32582
BRANCH=none
TEST=Dumped clock regs and saw correct values
Change-Id: Ifb6551f1e09b38f440f3bb7c759b5e6c0b9e4e44
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 48f989a0291044f5fb4340cc89546325d819d82f
Original-Change-Id: I6c9e760ac39def92a6054d673f781facdbfd70a2
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229993
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9523
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When displaying a 800x600 bitmap on 2560x1800 panel, the image
is shown very small. So, set the fb to 1280x800 (based on tegra
dsi driver default mode setting), a 800x600 image can be shown
relatively proportional to panel size.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: I1e360aeaec97b9df5d86e46951ab1326610260d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67c2a381322721a24b1b7f9ac366073b7e3c490c
Original-Change-Id: I62cbe9de1d1002293df20f8b1d752905c6ef33aa
Original-Reviewed-on: https://chromium-review.googlesource.com/229912
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9521
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
panel spec such as resoultion, bits per pixel are
needed to pass to depthcharge/payload for displaying
bitmap onto panel.
Enable display code only if mainboard selects
MAINBOARD_DO_NATIVE_VGA_INIT. Otherwise build breaks for
boards that do not support display init yet.
BRANCH=none
BUG=chrome-os-partner:31936
TEST=Compiles for both rush and ryu. Display comes up for ryu in both normal and
dev mode.
Change-Id: I81b4d289699e7b0c2758ea1a009cbabaf8a2ce28
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b9b42486f203d332f6068ccd6f4a1a982d327a6b
Original-Change-Id: I5c8fde17d57e953582a1c1dc814be4c08e349847
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Commit-Id: ce2883b21d3fbfd54eac3a355fb34ec70e9f31ad
Original-Change-Id: Ib4a3c32f1ebf5c6ed71c96a24893dcdee7488b16
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/9519
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Change-Id: I2bd1b2c2b1bfe75702a12129ca57b3afa6542575
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6aac5ecb014ab213f465b9aa78f587994c6b3624
Original-Change-Id: I64f2df49a258b4dd024305a9757704a823265e99
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229911
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9516
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chrome-os-partner:31936
TEST=build and test on ryu
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: Ia10bf7ae3bde389e883970f9a6ee931c32b8172b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26902364b6a453adb850abfb0c4ce9686e99b5d
Original-Change-Id: I68b92608098959cca14324bfc7e1e58389205989
Original-Reviewed-on: https://chromium-review.googlesource.com/226905
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9514
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:33583
BRANCH=None
TEST=No EC SW sync messages seen in depthcharge boot flow.
Change-Id: I62b7061a833ba607457a580fb2b217b9c2df0e74
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 552b1d19bacd6692ffb6257fc81220ba0ed89344
Original-Change-Id: I5c1df5a23977f461011a2937adda5770b4742378
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229081
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9513
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Chrome OS support needs to be enabled on urara. This patch adds a
placeholder file to keep Chrome OS support code.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=none
Change-Id: I0731469934f04bd68914f09db5d64758c5d01545
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 169c62c9443c3b9fcab23b312b5cb18ba79437f4
Original-Change-Id: I8ec328d4f965ff80d17847f2f8ce62b402c42a46
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226179
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9466
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Log the new EC panic host event.
BUG=chrome-os-partner:36985
TEST=Manual on Samus. Trigger EC panic, verify that "Panic Reset in
previous boot" is seen in /var/log/eventlog.
BRANCH=Samus
Change-Id: If59c522bd06f308a7ee6c5ff69ea427fcea361c9
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: dae4eb50b3607c5141a77fce6709107283f5dc36
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I89b358a81a962fd463101d84b6bcf3b0a12830c7
Original-Reviewed-on: https://chromium-review.googlesource.com/252391
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-on: http://review.coreboot.org/9508
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
