| Age | Commit message (Expand) | Author |
|---|
| 2018-03-13 | mb/google/octopus: Add yorp variant | Justin TerAvest |
| 2018-03-13 | mb/google/poppy/variants/nautilus: Enable SAR configs | Furquan Shaikh |
| 2018-03-13 | mb/google/poppy/variants/nami: Use internal pulldown for MEM_CONFIG_4 | Furquan Shaikh |
| 2018-03-12 | mb/google/octopus: Fix lpddr4 skus | Justin TerAvest |
| 2018-03-12 | mb/google/zoombini/variants/meowth: change gpios to no-connects | Nick Vaccaro |
| 2018-03-12 | mb/google/poppy: Clear memory_params before initializing them | Nicolas Boichat |
| 2018-03-10 | meowth: Add SAR Sensor in devicetree | Gwendal Grignou |
| 2018-03-09 | mb/google/zoombini: re-enable software sync | Caveh Jalali |
| 2018-03-09 | mb/google/poppy/variants/nami: Fix typo in nami Makefile | Furquan Shaikh |
| 2018-03-09 | mainboard/google/kahlee: Set GPIO 40 to input | Martin Roth |
| 2018-03-09 | mainboard/google/kahlee: Disable Bayhub part on board_id 0 | Martin Roth |
| 2018-03-08 | mb/google/poppy/variants/nami: Define smbios_mainboard_sku to return SKU IDs | Shelley Chen |
| 2018-03-08 | mb/google/kahlee: Do not define SIO_EC_ENABLE_COM1 | Daniel Kurtz |
| 2018-03-08 | mb/google/poppy : Get SKU_ID from EC for Nami/Vayne | amanda_hwang |
| 2018-03-08 | google/scarlet: Adjust K&D power sequence from software | Brian Norris |
| 2018-03-08 | mb/google/octopus: Add gpio configs for communities | Shaunak Saha |
| 2018-03-08 | mb/google/octopus: Add device tree settings | Shamile Khan |
| 2018-03-08 | mb/google/nautilus: Correct LINK FREQ of imx258 sensor | Alan Chiang |
| 2018-03-08 | mb/google/kahlee: Add SKU support | Simon Glass |
| 2018-03-08 | mb/google/poppy/variants/nami: Add WACOM EMR support | jasper lee |
| 2018-03-07 | mb/google/poppy/variants/nami: Add SPD files for nami | jasper lee |
| 2018-03-07 | mb/google/zoombini/variants/meowth: enable SAR power | Nick Vaccaro |
| 2018-03-07 | mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wake | Seunghwan Kim |
| 2018-03-07 | mb/google/poppy/variants/nami: Add memory detection logic | Shelley Chen |
| 2018-03-07 | mb/google/poppy/variants/nami: Add spd files | Shelley Chen |
| 2018-03-06 | google/snappy: enhance CCD type-A USB 2.0 phy strength | Kevin Chiu |
| 2018-03-06 | mainboard/google/fizz: Check HDMI HPD and DisplayPort HPD | Daisuke Nojiri |
| 2018-03-06 | mb/google/fizz: Skip FSP init for UART 0 | Duncan Laurie |
| 2018-03-06 | Revert "mainboard/google/meowth: enable PCH iSCLK" | Lijian Zhao |
| 2018-03-05 | mb/google/poppy: Allow use of optional secondary SPD | Furquan Shaikh |
| 2018-03-05 | mb/google/poppy/variants: Set pch_trip_temp to 75C | Furquan Shaikh |
| 2018-03-02 | sb/intel/common: Fix conflicting OIC register definition | Nico Huber |
| 2018-03-02 | mb/google/zoombini/variants/meowth: Enable NVMe | Bora Guvendik |
| 2018-03-02 | mainboard/google/zoombini/variant/meowth: enable speed shift | Nick Vaccaro |
| 2018-03-01 | mb/google/reef/sand: Override USB2 phy settings | Katherine Hsieh |
| 2018-03-01 | mainboard/google/meowth: Turn on DBC over USB3.0 | Lijian Zhao |
| 2018-03-01 | mb/google/poppy/variant/nautilus: Change SlowSlewRateForSa setting | Seunghwan Kim |
| 2018-03-01 | mb/google/reef: Override USB2 phy settings | Tim Chen |
| 2018-03-01 | mb/google/coral: add usb2 phy setting override for some variants | Sheng-Liang Pan |
| 2018-03-01 | mb/{amd/gardenia,google/kahlee}: Initialize GPIOs earlier | Justin TerAvest |
| 2018-02-28 | mainboard/google/zoombini: consolidate SPD makefiles | Nick Vaccaro |
| 2018-02-28 | mb/google/poppy/variants/nami: Enable elan touchscreen | Crystal Lin |
| 2018-02-28 | mb/google/octopus: Add LPDDR4 memory init | Ravi Sarawadi |
| 2018-02-27 | sb/intel/{bd82x6,ibexpeak}: Move RCBA macros to a common location | Arthur Heymans |
| 2018-02-26 | mainboard/google/zoombini: enable 4 cores | Nick Vaccaro |
| 2018-02-23 | mb/google/fizz: Enable PCIe port 11, 12 | Zhongze Hu |
| 2018-02-22 | mb/google/kahlee/mainboard.c: Fix mainboard_picr_data | Richard Spiegel |
| 2018-02-22 | mb/google/kahlee: Use GPIO macros for baseboard | Justin TerAvest |
| 2018-02-22 | mb/google/kahlee: Correct bad gpio entry | Justin TerAvest |
| 2018-02-22 | mainboard/google/meowth: enable PCH iSCLK | Lijian Zhao |
| 2018-02-22 | mainboard/google: Disable big, pit, and ryu ec builds | Martin Roth |
| 2018-02-22 | mainboard/google/zoombini: Add config for meowth audio | Sathyanarayana Nujella |
| 2018-02-21 | mainboard/google/kahlee: Add tis_plat_irq_status | Chris Ching |
| 2018-02-20 | mb/google/poopy/variants/nami: Add Pmax setting | Gaggery Tsai |
| 2018-02-20 | mb/google/kahlee/OemCustomize.c: Disable bank interleave | Richard Spiegel |
| 2018-02-17 | mb/google/fizz: Wait until display is ready | Daisuke Nojiri |
| 2018-02-17 | soc/amd/stoneyridge: Normalize GPIO init | Justin TerAvest |
| 2018-02-16 | mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45W | Naresh G Solanki |
| 2018-02-16 | mb/google/zoombini/variants/meowth: enable FPMCU interrupt | Vincent Palatin |
| 2018-02-16 | google/gru: Fix GPIO_WP pull and polarity for Scarlet | Julius Werner |
| 2018-02-15 | mb/google/poppy/variant/nautilus: Enable and configure DPTF | Seunghwan Kim |
| 2018-02-15 | mb/google/octopus: Add new board | Hannah Williams |
| 2018-02-14 | mb/*/spd: Use normal binary numbers (0b0010) instead of special format (2b0010) | Jonathan Neuschäfer |
| 2018-02-13 | mb/google/poppy: Fix the SPD for samsung_dimm_K4A8G165WB | Furquan Shaikh |
| 2018-02-12 | mainboard/google/zoombini/variants/meowth: enable touchscreen | Nick Vaccaro |
| 2018-02-12 | google/kahlee: Select HAVE_ACPI_RESUME | Marshall Dawson |
| 2018-02-12 | google/snappy: enhance BigDaddy USB#2 2.0 strength | Kevin Chiu |
| 2018-02-11 | mb/google/fizz: Set SATA GPIOs in bootblock | Shelley Chen |
| 2018-02-10 | mb/google/poppy/variants/nautilus: set oem_id, oem_table_id fields of acpi_he... | Naveen Manohar |
| 2018-02-10 | mainboard/google/meowth: Enable ECT again | Lijian Zhao |
| 2018-02-10 | mb/google/poppy/variants/nami: set oem_id, oem_table_id fields of acpi_header_t | Kaiyen Chang |
| 2018-02-10 | mb/google/grunt: Add ADAU7002 to devicetree | Daniel Kurtz |
| 2018-02-10 | mb/google/kahlee: Add grunt audio codecs to devicetree | Daniel Kurtz |
| 2018-02-08 | mb/google/poppy/variants/nami: Revise AC/DC loadlines | Gaggery Tsai |
| 2018-02-07 | mb/google/fizz: Set Pmax to 120 for all SKUs | Shelley Chen |
| 2018-02-07 | google/kahlee/grunt: Fix 2 device specific variables | Akshu Agrawal |
| 2018-02-07 | mb/google/poppy/variants/poppy: Enable EC_ENABLE_SECOND_BATTERY_DEVICE | Nicolas Boichat |
| 2018-02-07 | mb/google/poppy/variants/nami: Change WiFi wake pin to GPP_E22 | Furquan Shaikh |
| 2018-02-06 | google/gru: Add another 512KB to the COREBOOT FMAP region | Julius Werner |
| 2018-02-06 | mb/google/kahlee: Fix grunt I2C rise/fall times | Justin TerAvest |
| 2018-02-06 | mb/google/kahlee: Remove cmos.layout | Richard Spiegel |
| 2018-02-06 | mb/google/eve: Enable HotPlug on PCIe root port for WiFi | Duncan Laurie |
| 2018-02-06 | google/kahlee: Initialize non-early i2c buses in mainboard_init | Daniel Kurtz |
| 2018-02-06 | mb/google/fizz: Determine PsysPl3 and Pl4 values | Shelley Chen |
| 2018-02-06 | mb/google/nautilus: Work around the power issue of MIPI and USB cameras | Andy Yeh |
| 2018-02-05 | mb/google/fizz: Get OEM ID and SKU ID from EC | Daisuke Nojiri |
| 2018-02-05 | google/lars: Turn on keyboard backlight in romstage | Jenny TC |
| 2018-02-05 | google/lars,lili: Update GPIO mapping | david |
| 2018-02-05 | google/lars: Update the MAINBOARD_FAMILY string in Kconfig | Duncan Laurie |
| 2018-02-05 | google/lars,lili: Update SPD Data | Matt DeVillier |
| 2018-02-05 | google/lars: Add sdmode-delay property for max98357a | Matt DeVillier |
| 2018-02-05 | google/lars: update device properties for Nuvoton codec | Matt DeVillier |
| 2018-02-05 | google/lars,lili: Set new thermal parameters | david |
| 2018-02-05 | google/lars: Update DPTF setting | david |
| 2018-02-05 | mb/google/kahlee: Enable wlan card so it can be detected | Martin Roth |
| 2018-02-02 | google/gru: Use newer version of Innolux P097PFG panel init code | Lin Huang |
| 2018-02-02 | mb/google/kahlee/mainboard.c: Create mainboard_pirq_data | Richard Spiegel |
| 2018-02-01 | mb/google/kahlee: always load and run display oprom | Aaron Durbin |
| 2018-01-31 | mb/google/kahlee: Add grunt cr50 support | Justin TerAvest |
| 2018-01-31 | mb/google/kahlee: Add grunt trackpad in devicetree | Justin TerAvest |
