aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2024-04-25mb/google/nissa/var/glassway: Enable Wi-Fi sar table for Intel moduleDaniel_Peng
1.Enable CHROMEOS_WIFI_SAR flag to load a SAR table for Intel module. 2.Describe the FW_CONFIG probe for the settings on glassway. - WIFI_SAR_0 for Intel Wi-Fi module AX211 BUG=336051631 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I9e43081c93ef17291c5d55cf262a0f4d1497447b Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81781 Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/brya/var/nova: Add initial configurationsKenneth Chan
Upload initial configuration for nova based on proto schematics. Memory: SAMSUNG 2G*4 K4U6E3S4AB-MGCL HYNIX 2G*4 H9HCNNNBKMMLXR-NEE BUG=b:328711879 TEST=FW_NAME=nova emerge-constitution coreboot chromeos-bootimage Change-Id: Ic9ff3ed2fb3a7f0f100385d0a0444d38fcff5c51 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-04-25mb/google/nissa/var/yaviks: Add stop pin for G2 touchscreenWisley Chen
Add stop pin control for G2 touchscreen BUG=b:335803573 TEST=build and verified Touchscreen work normally Change-Id: I7e0bbc7722cdda6bcca0485009fcf8510b1f55e2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81971 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/corsola/var/wugtrio: Add STA_ER88577 MIPI panelYang Wu
Add STA_ER88577 MIPI panel for Wugtrio. Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf BUG=b:331870701 TEST=emerge-staryu coreboot chromeos-bootimage BRANCH=corsola Change-Id: I279d431d80ca0770540d88e213d4aeafe77038ce Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82055 Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-24mb/google/nissa/var/anraggar: Add cbj_sleeve to control mic jackJianeng Ceng
Add a new GPIO port cbj-sleeve for kernel driver to call. At the same time, a new rt5645 driver is added to replace the generic driver to parse gpio. After entering the system, it is pulled high by the kernel to enable the MIC function. BUG=None TEST=MIC function is normal Change-Id: I093be6a3e357aae389fcbe8291a9701c40b62e15 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81774 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-23mb/google/rex/var/deku: Update USB _PLD valuesTony Huang
Fix custom_pld for USB2-C2 and USB3-C3 with same PLD group. Update USB2-A4 PLD group token. USB2/USB3 Type-C Port C2 "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(3, 1))" USB2/USB3 Type-C Port C3 "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(4, 1))" BUG=b:320203629 BRANCH=firmware-rex-15709.B TEST= emerge-ovis coreboot Change-Id: Ieecf0f7dda671a421e4e4a4adbf83240fadd018d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-23mb/google/rex/var/deku: Configure GPIOTony Huang
Set unused pin to NC internal PU 20K BUG=b:325674908 BRANCH=firmware-rex-15709.B TEST= emerge-ovis coreboot Change-Id: I78eddaa41c14721eeb6ff33a4cb15382853e430b Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-22mb/google/nissa/var/craaskov: modify 6W and 15W DPTF parametersIan Feng
The DPTF parameters were defined by the thermal team. Based on thermal table in 330817690#comment33. Set 6w "tcc_offset" to "15" by fw_config. BUG=b:330817690, b:290705146 BRUNCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I19100d960919dc3087fd067c24659de467eea276 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81997 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2024-04-19mb/google/brox/variants/lotso: add missing hda_verb.hFelix Held
Commit 00b40090aecf ("mb/google/brox: Move hda verb to variant dir") introduces a variant-specific file for the HDA verb tables, which commit 1bf0c3f1897c ("mb/google/brox: Create lotso variant") was missing which caused the build to fail when both patches were submitted. To fix the tree, add this file to the newly created lotso variant. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a85115a204d9d9447a58da71eb65b1de963023d Reviewed-on: https://review.coreboot.org/c/coreboot/+/82014 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-19mb/google/brox: Create lotso variantKun Liu
Create the lotso variant of the brox reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:333494257 BRANCH=None TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_LOTSO Change-Id: I5939127f9e6abe5b792c0627d9d67e739b27083b Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-19mb/google/brox: Move hda verb to variant dirtongjian
Others variant boards might use diff HDA Codec, so move hda verb to brox variant dir. BUG=b:314702466 BRANCH=None TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Device list: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ALC256 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Headphone detection: evtest 8 Event: time 1713404716.656768, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1713404716.656768, -------------- SYN_REPORT ------------ Event: time 1713404722.802661, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0 Event: time 1713404722.802661, -------------- SYN_REPORT ------------ Change-Id: Id987c248c37dc8bdc63be7a2513fa8997b5ddc33 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81945 Reviewed-by: Poornima Tom <poornima.tom@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-19mb/google/brox/var/greenbayupoc: Add fw_config field for storageEren Peng
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333325006 TEST=emerge-brox coreboot depthcharge with no errors Change-Id: I0e220787d6ac73ec8fa2469ed958981d0801920e Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-04-18mb/google/nissa/var/glassway: Add SPD IDs for two new memory partsDaniel_Peng
Support Memory for Hynix H58G66AK6BX070 and Samsung K3KL9L90CM-MGCT in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign H58G66AK6BX070 4 (0100) K3KL9L90CM-MGCT 5 (0101) BUG=b:335341310 BRANCH=firmware-nissa-15217.B TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\ part_id_gen.go ADL lp5 \ src/mainboard/google/brya/variants/glassway/memory/ \ src/mainboard/google/brya/variants/glassway/memory/\ mem_parts_used.txt" Change-Id: Ic07ec36a8015ce6433196a93e894b818a515b954 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81955 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2024-04-17mb/google/brox: Enable SAGvAshish Kumar Mishra
Enable SaGv support for brox BUG=None BRANCH=None TEST=Boot brox with SAGv enabled and verify in fsp debug logs Change-Id: I80c44e7df1d75732c6982b27e44ecd6060b1b3f1 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81556 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-17mb/google/brya: Enable UFS driver for edk2 payloadMatt DeVillier
Several brya-based boards use UFS for storage, so enable the edk2 UFS driver when using the edk2 payload. TEST=build/boot google/brya (banshee, craaskov), verify internal boot media functional with edk2 payload. Change-Id: I3dc018582e974bf73c7668f78da9b81eeb038c01 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81871 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-17mb/google/zork: Enable eMMC driver for edk2 payloadMatt DeVillier
Several zork-based boards use eMMC for storage, so enable the edk2 eMMC driver when using the edk2 payload. TEST=build/boot google/zork (morphius, vilboz), verify internal boot media (both eMMC and NVMe) functional with edk2 payload. Change-Id: Ib7e98f309594554dbcf1ddd875d47c89bd9e0e44 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-17mb/google/corsola: Add new board variant VeluzaFrank Wu
Add a new Krabby follower device 'Veluza'. BUG=b:333630131 BRANCH=corsola TEST=none Change-Id: Idedcbfbddd6d98a51cf28a0963d68f6d8c68382c Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81791 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-16mb/google/nissa/variant/sundance: Modify i2c device for touch deviceLeo Chou
1. Remove non-use i2c address 0x10, 0x24 and 0x40 of touch IC for touch screen 2. Add new i2c address 0x5d of Goodix touch IC for touch screen 3. Add new i2c address 0x38 of Focal touch IC for touch pad BUG=b:333804572 TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage Change-Id: I8e2c60820a07b99b69860fd4f6557b448aef2341 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-16mb/google/nissa: Create pujjoga variantLeo Chou
Create the pujjoga variant of nissa reference board by copying the template files to a new directory named for the variant. Due to new_variant.py limitation that repo can no longer be used in inside, created this CL manually following google suggestion. BUG=b:333839287 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PUJJOGA Change-Id: Ia8eb11eb65f9013e83abd45eefe7705d05b8697e Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81891 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-15mb/google/zork: Increase SMMSTORE size to 256KMatt DeVillier
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since a minimum of (2) 64K blocks are needed. Increase the size to 256K to match other boards in the tree. TEST=build/boot zork (morphius) with SMMSTORE enabled. Change-Id: Ifd3be9b0757e270d2f106e2fbebf3991e49dec65 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-15mb/google/skyrim: Increase SMMSTORE size to 256KMatt DeVillier
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since a minimum of (2) 64K blocks are needed. Increase the size to 256K to match other boards in the tree. TEST=build/boot skyrim (frostflow) with SMMSTORE enabled. Change-Id: I34f9d27c27ab7148dfc530322f741a576c348de7 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-15mb/google/myst: Increase SMMSTORE size to 256KMatt DeVillier
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since a minimum of (2) 64K blocks are needed. Increase the size to 256K to match other boards in the tree. Change-Id: Ic45324b8c5bbd205e889e934c9d5dd17f7775152 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81867 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-15mb/google/guybrush: Increase SMMSTORE size to 256KMatt DeVillier
Anything below 128K will cause SMMSTORE driver in edk2 to fail, since a minimum of (2) 64K blocks are needed. Increase the size to 256K to match other boards in the tree. TEST=build/boot guybrush (dewatt) with SMMSTORE enabled. Change-Id: Ic4fdacd493d83fa3c1683a06d1276b0190f6db8b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-15mb/google/fizz: Use variant-specific gma-mainboard.ads filesMatt DeVillier
The karma variant, being a Chromebase, has an internal eDP output for the built-in display whereas the fizz/endeavour variants do not. Use separate gma-mainboard.ads files so that karma's internal panel works properly with libgfxinit. TEST=build google/fizz (fizz/karma) with libgfxinit enabled, ensure correct gma-mainboard.ads file is included in the build. Change-Id: Ia6aca538ba8c13b48aa80901222071d704b5f0c0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-15mb/google/brox: Create greenbayupoc variantEren Peng
Create the greenbayupoc variant of the brox reference board by copying the template files to a new directory named for the variant. BUG=b:329530883 BRANCH=None TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_GREENBAYUPOC. Change-Id: I90936d97b41e59c49dd92997146caf580bce1f4f Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-15mb/google/corsola: Add new board variant SkittyHerbert Wu
Add a new Krabby follower device 'Skitty'. BUG=b:331702790 TEST=emerge-corsola coreboot chromeos-bootimage BRANCH=corsola Change-Id: I2f12bccfda591a5baf8d23d217b6f1f81b059d15 Signed-off-by: Herbert Wu <herbert1_wu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81772 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Geoffrey Chien <geoffrey_chien@pegatron.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Shawn Ku <shawnku@google.com>
2024-04-13mb/google/beltino: Set initial fan PWM to 30%Matt DeVillier
Recent changes to the ITE 8772F SIO code caused the initial fan PWM to change from 0 to 50%; set it to 30% to reduce fan noise while still providing some temp control before the OS/ACPI takes over. TEST=build/boot google/beltino to payload, verify fan noise is negligible. Change-Id: I0177235d73e051f02b5333cf1d735556382b919f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81513 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-13superio/ite: Unify it8772f with common codeJoel Linn
The it8772f is now configured by the much better common code that is used for other chips in the family as well. This mainly concerns the EC, the GPIO functionality was not moved to common as it currently lacks a sane abstraction in any codebase. The datasheets of the it8772e(f) and it8728f (for reference) were studied and verified against the common code, adding exceptions where needed. Change-Id: Ic4d9d5460628e444dc20f620179b39c90dbc28c6 Signed-off-by: Joel Linn <jl@conductive.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81310 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-04-12mb/google/brox: Initialize NOTE_BOOK_MODE GPIOShelley Chen
The GPIO for NOTE_BOOK_MODE has changed from GPP_B17 to GPP_E9. Also initializing it (if ISH is enabled) to be NF2 (ISH_GP4). Also took the liberty of alphabetizing all the ISH GPIOs to they're easier to search through. BUG=b:316421831 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage Make sure that brox device still boots up with this change. Change-Id: I4a091b58deb855c7a7f1489a9506db2f821503b7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81789 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-12mb/google/brya/var/sundance: Add GPIO tableLeo Chou
Fill GPIO table for Sundance. BUG=b:327520553 TEST=emerge-nissa coreboot Change-Id: I53ed5874347006985ca5231d1531fa519088f796 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81613 Tested-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-04-11tree: Drop unused <edid.h>Elyes Haouas
Change-Id: I66265727b68b6ad10722439314b466298dbfff28 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81821 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-11mb/google/nissa/var/craaskov: Disable external fivrIan Feng
In next phase, craaskov will remove external fivr. Use the board version to config external fivr for backward compatibility and show message. BUG=b:330253778 TEST=boot to ChromeOS, cold reboot/suspend/recovery mode/install OS work normally. Change-Id: I9280a86bf78caa10b527a6569ac580dfe1d66f60 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81607 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-11mb/google/karis: Add FW_CONFIG and device for VPUJamie Ryu
BUG=b:333605309 TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0) is enabled when bit20 is set, and disabled when cleared. Change-Id: I6e2230715d783ea7108d71699fd19684ce19e2ff Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-11mb/google/brya: Create trulo variantDinesh Gehlot
This patch adds a new variant trulo for the baseboard trulo. BUG=b:333314089 TEST=abuild -a -x -p none -t google/brya Change-Id: I91157d252ef56c8938bfc08ed0f734c5dc7e614d Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81627 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2024-04-11mb/google/brya: Add new baseboard truloDinesh Gehlot
This patch adds a new baseboard trulo. This commit is a stub which only adds the minimum code needed for a successful build. BUG=b:333314089 TEST=abuild -a -x -p none -t google/brya Change-Id: Iad6230064c6b8359698d37c3e0440614cc7b073d Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-11tree: Drop unused <string.h>Elyes Haouas
Change-Id: I0e216cbc4acf9571c65c345a1764e74485f89438 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81818 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-10tree: Drop unused <elog.h>Elyes Haouas
Change-Id: I40e2e5a786499abbe2fce63d6e0f1ac1e780ab51 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-10tree: Drop unused <stdio.h>Elyes Haouas
Change-Id: I26c2abfce3417ed096d945745770fcae91a1e4ad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81814 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-10mb/google/corsola/var/wugtrio: Correct the display orientationYang Wu
Set orientation of KD_KD101NE3_40TI to LB_FB_ORIENTATION_RIGHT_UP to align the volume up/down direction with menu up/down in FW screen. BUG=b:331870701 TEST=emerge-staryu coreboot chromeos-bootimage, and check FW screen on wugtrio, test volume key behaves as expected. BRANCH=corsola Change-Id: Ie101cc8b983d3d16587f88fa787ed622e59d27eb Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81752 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-10mb/google/brya: Remove baseboard-specific FMD namesDinesh Gehlot
This patch renames the 16MB FMD file to remove the baseboard-specific name 'Nissa'. This allows other supported baseboards to utilize the 16MB SPI flash. Additionally, the patch attempts to create a generic, unified 32MB FMD file for both brya and nissa variants. BUG=b:333314089 TEST=Build and boot Nivviks. Change-Id: I9151a4bcbe9cc084cc19b1a3e91c0321fe4dcc37 Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81676 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-09tree: Drop unused <delay.h>Elyes Haouas
Change-Id: I265e427254ce9f735e65b0631c43f98bc778a34f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81812 Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-09tree: Drop unused <console/console.h>Elyes Haouas
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-09mb/google/*: Drop unused header file console/console.hRuihai Zhou
The header file console/console.h is unused, just drop it. TEST=abuild -t google/corsola -b wugtrio -a TEST=abuild -t google/geralt -b ciri -a Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Change-Id: If3689afe532b63384b7905116c44c598e5fa13ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/81685 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
2024-04-08mb/google/brox: Update verb table to fix headset detectionPoornima Tom
Correct verbtable value for pin widget 20 of Realtek ALC256 based on the updated verbtable received from Realtek. Updated Version : 5.0.3.1. This fixes the headset detection failure, when power_save is enabled in legacy hda driver. BUG=b:330433089 BRANCH=None TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I71b7d59b3ab5310a0b6cdb31fb5033f94263d151 Signed-off-by: Poornima Tom <poornima.tom@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81654 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Terry Cheong <htcheong@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-08mb/google/brya: Sort Kconfig option alphabeticallyVarshit Pandya
Change-Id: I878c14058e1edc0f64e37c2fc16b8dcf75b90192 Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81631 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-04-04mb/google/screebo: Add FW_CONFIG and device for VPUJamie Ryu
BUG=b:332488817 TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0) is enabled when bit20 is set, and disabled when cleared Change-Id: I6d7b35dbf8ac9b0abb42f64a947b4bb94f3c6b0f Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Daniel Kang <daniel.h.kang@intel.com>
2024-04-04mb/google/nissa/variant/sundance: Update devicetree settingsLeo Chou
Based on schematic and gpio table of sundance, generate overridetree.cb settings for sundance. BUG=b:328505938 TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage Change-Id: I857be7bc7f98281cac57fef85bf9f3cef2ec14e9 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-04mb/google/nissa/var/gothrax: Add touchscreen driver for ILI2901A-A210Yunlong Jia
I2C slave addresses 0x41. BUG=b:332458912 BRANCH=None TEST=emerge-nissa coreboot & working correctly in DUT Change-Id: I2d26bfd4f415aa128b6256f83bc58987b15a557a Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81610 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-04mb/google/brya/var/xol: Reduce power limits according to battery statusSeunghwan Kim
When battery level is below critical level or battery is not present, cpus need to run with a power optimized configuration to avoid platform instabilities such as system power down. This will check the current battery status and configure cpu power limits using current PD power value. BUG=b:328729536 BRANCH=brya TEST=built and verified MSR PL2/PL4 values. Intel doc #614179 introduces how to check current PL values. [Original MSR PL1/PL2/PL4 register values for xol] cd /sys/class/powercap/intel-rapl/intel-rapl\:0/ grep . *power_limit* constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W) constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W) constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W) [When connected 60W adapter without battery] Before: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:114000000 After: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:60000000 [When connected 45W adapter without battery] Before: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:114000000 After: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:45000000 constraint_2_power_limit_uw:45000000 Change-Id: I5d71e9edde0ecbd7aaf316cd754a6ebcff9da77d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81614 Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-04mb/google/nissa/var/anraggar: Set EN_SPK_PA to low to avoid noiseJianeng Ceng
In order to avoid the noise caused by the codec output to the audio jack during the shutdown and poweron process, we will use GPP_A11 for the codec power supply gate, keep low during the startup process, and wait for the driver to turn on. This change does not affect the beep output of depthcharge. BUG=None TEST=There is no squeaking sound when turning on and off Change-Id: I5982be5a8d965086b46861f4c2c758d9bdee6e75 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81629 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-03mb/google/corsola: Add new board variant WugtrioYang Wu
Add a new Staryu follower device 'Wugtrio'. And also enables SD card support and MIPI panel support. BUG=b:331870701 TEST=emerge-staryu coreboot chromeos-bootimage BRANCH=corsola Change-Id: I586de68da4d0ee2dd5b7baea92ebb06db9fcfe8b Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81585 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-03mb/google/corsola: Move MIPI panel selection to BOARD_SPECIFIC_OPTIONS sectionYang Wu
Move starmie mipi panel selection from BOARD_GOOGLE_STARYU_COMMON section to BOARD_SPECIFIC_OPTIONS section. BUG=None TEST=emerge-staryu coreboot chromeos-bootimage BRANCH=corsola Change-Id: Ib5792542f55a78c0840b6169b5ecf092e7cefe98 Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81602 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-04-02mb/google/brox: Enable PMC pins to work with PDAshish Kumar Mishra
Enable SMLINK1 interface for PMC-PD communication to configure Type-C muxes. Refer RPL EDS vol 1: 765585. BUG=b:327622474 BRANCH=None TEST=Boot image on SKU2 and check PMC-PD working. Change-Id: Ia678d291e7a14aefe09026e70478fea3f68c8e10 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81207 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Deepti Deshatty <deepti.deshatty@intel.com>
2024-04-02mb/google/brya: Make get_soc_power_limit_config() a public functionSeunghwan Kim
Make get_soc_power_limit_config() a public function to use on brya variants. Add prefix 'variant_' for it. BUG=None BRANCH=brya TEST=emerge-brya coreboot Change-Id: I31f938938e7c9da49c2aa7b52dd4b5f46f793495 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81616 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-02mb/google/nissa/var/sundance: Generate SPD ID for 4 supported memory partsLeo Chou
Add sundance supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT 2. Hynix H58G56AK6BX069, H9JCNNNBK3MLYR-N6EE BUG=b:332201349 TEST=Use part_id_gen to generate related settings Change-Id: Ieece88b0b2b2ea5f0d6192ee8441e50d3f22a972 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81612 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-02mb/google/rex/var/deku: Swap LAN device indices for correct MAC addressTony Huang
Deku has two Ethernet ports. Currently both get assigned the wrong MAC address due to the LAN devices indices being swapped and vpd ethernet_mac0() affects device eth1 and vpd ethernet_mac1() affects device eth0. Correct the device indices for LAN devices so ethernet_mac[0-1] in vpd can apply to the correct ethernet ports. BUG=b:320203629 BRANCH=firmware-rex-15709.B TEST=vpd -s ethernet_mac0=<mac address0> vpd -s ethernet_mac1=<mac address1> reboot the system and check ifconfig eth0 and eth1 MAC addresses are fetched correctly Change-Id: Id1508104cbb5cf0a234f34f9db19cc535fdb634b Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81564 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-04-01mb/google/{brya,hades}: use soc index for variant_update_power_limits()Seunghwan Kim
The power_limits_config variable for ADL/RPL is array data, but we got soc_power_limits_config variable without its index. So correct the code to get the proper pointer of the data for current CPU SKU. I tried to override the PL4 value to 80W from 114W with following table in ramstage.c as a test for bug b/328729536. ``` const struct cpu_power_limits limits[] = { {PCI_DID_INTEL_RPL_P_ID3, 15, 6000, 15000, 55000, 55000, 80000}, } ``` And then verified the msr_pl4 value on ChromeOS using Intel PTAT tool. - Before this patch: msr_pl4 was not changed, it's always 114 - After this patch: msr_pl4 was changed to 80 BUG=None BRANCH=None TEST=Built and tested the function could adjust PL4 on xol in local. Change-Id: I9f1ba25c2d673fda48babf773208c2f2d2386c53 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-01mb/google/brya/var/xol: Update GPIO settings for speaker and DMICSeunghwan Kim
Update GPIO configuration according to the schematic changes. The locations of speaker and DMIC are swapped. - Speaker: I2S2 -> I2S1 - DMIC: GPP_S2/GPP_S3 -> GPP_R4/GPP_R5 BUG=b:318584606 TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I3468d79f33d9d9ef8377ccf0f8f628956b02d3c3 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81444 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-01mb/google/brox: Configure ISH device based on FW_CONFIGKarthikeyan Ramasubramanian
ISH Firmware name needs to be configured only when full sensing capabilities are enabled through ISH_ENABLE FW_CONFIG. Similarly DMA property needs to be added only when UFS is enabled through STORAGE_UFS FW_CONFIG. Hence configure the ISH device at run-time based on FW_CONFIG. BUG=b:319164720 TEST=Build Brox BIOS image and boot to OS. Change-Id: I678416acd48e03ab77ae299beae6e295a688b8df Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81418 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-01mb/google/nissa/var/glassway: Add 2nd Synaptics touchpadFrank Chu
Add Synaptics touchpad via HID-I2C interface in I2C5 bus for glassway. BUG=b:331677400 BRANCH=firmware-nissa-15217.B TEST=emerge-brya coreboot and check touchpad function work. [INFO ] input: PNP0C50:00 06CB:CE9B Touchpad as /devices/pci0000:00/0000:00:19.1/i2c_designware.5/i2c-17/i2c-PNP0C50:00/0018:06CB:CE9B.0001/input/input4 [INFO ] hid-multitouch 0018:06CB:CE9B.0001: input,hidraw0: I2C HID v1.00 Device [PNP0C50:00 06CB:CE9B] on i2c-PNP0C50:00 Change-Id: Ifbb2cb750a80bc6e8f96609257dcd1e695ad1fa4 Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-04-01mb/google/nissa: Create sundance variantLeo Chou
Create the sundance variant of nissa reference board by copying the template files to a new directory named for the variant. Due to new_variant.py limitation that repo can no longer be used in inside, created this CL manually following google suggestion. BUG=b:328505938 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_SUNDANCE Change-Id: Ia8ba318f18d2cac69898687311631778e61bf2ea Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81347 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
2024-04-01mb/google/corsola: Add new board variant 'Kyogre'Kei Hiroyoshi
Add a new Kingler follower device 'Kyogre' BUG=b:318614302 TEST=emerge-corsola coreboot Change-Id: Iae3857a9f8edadcc2eee3500fda2e76c0334221c Signed-off-by: Kei Hiroyoshi <hiroyoshi.kei@fujitsu.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81218 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-03-30mb/google: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: If68303cd59b287c8a5c982063b2ab75fd74898d6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-03-27mb/google/nissa/var/anraggar: Modify the GPP_F15 of pen to EDGE_BOTHQinghong Zeng
Currently, simply changing the wake event configuration to ANY does not completely resolve the issue of inserting a pen not waking the system. The pen actually needs to wake up the system both when plugged in and when pulled out. This is because in the pen's GPP_F15 configuration, the original attribute is EDGE_SINGLE, which should be changed to EDGE_BOTH. BUG=b:328351027 TEST=insert and remove pen can wakes system up. Change-Id: I1823afd0bcb86804227117d2d5def38788bc7387 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81441 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-27mb/google/brya: Create yavista varianthsueh.rasheed
Create the yavista variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:321583226 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_YAVISTA. Change-Id: I6fa464a4dcd9551a42e8746e64c724b3582dbe02 Signed-off-by: Hsueh Rasheed <hsueh.rasheed@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80342 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-27mb/google/brox: Fix GPE_EC_WAKE configurationKarthikeyan Ramasubramanian
Wake signal from EC is routed to GPP_D1 and hence GPE_EC_WAKE corresponds to GPE0_DW1_01. Fix GPE_EC_WAKE configuration. BUG=b:329026602 TEST=Build Brox BIOS image and boot to OS. Trigger suspend and wake up using EC generated events like AC connect/disconnect. Change-Id: Ifb89bd0de7b7fc316792e801ed5a1d3f25ca5b1c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Keith Short <keithshort@chromium.org>
2024-03-26mb/google/butterfly: Fix compiling for 64bit modeArthur Heymans
Change-Id: Ieaaba5b36796d97449896b8475744a21f01e93d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-03-24mb/google/veyron_{mickey,rialto}: Remove return statement in void functionElyes Haouas
Return statement is not useful in void function. Change-Id: I8cf020de335e4da933b7bbdc27b7ac6f31afe885 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81430 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-23src: Add missing SPDX license headersNicholas Chin
Other files in the commits that added these files were licensed under GPL-2.0-only, and the project as a whole is GPL-2.0-only, so use that as the license. Change-Id: I6c1a7ba582f61f98069ebf3857a8b5bdc8588c3e Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81421 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-22mb/google/nissa/var/anraggar: Update touchscreen enable pin to GPP_C0Qinghong Zeng
Assign GPP_C0 and enable only the touchscreen. Before modification, GPP_C0 supplies power to the touchscreen and sensor at the same time. Now the hardware circuit has been modified, GPP_C0 supplies power to the touchscreen alone. After the software is synchronously modified, when the device enters suspend(S0ix), GPP_C0 will not enable VDD, which can reduce the standby power consumption of the touchscreen when it is suspended(S0ix), which is about 2.1mW. BUG=b:304920262 TEST= touchscreen function workable Change-Id: Ia06209aa8303be4fc0669c5d6e5d7a06e8e9ab99 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81265 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-03-21mb/google/brox: Configure I2C timing for I2C devicesIvy Jian
Configure I2C0/1 timing in devicetree to meet timing requirement. (THIGH(us) minimum is 0.6us). Before: I2C0 : THIGH(us) 0.595us I2C1 : THIGH(us) 0.582us After: I2C0 : THIGH(us) 0.673us I2C1 : THIGH(us) 0.666us Change-Id: I79af4fde4eb08d4eb896794756a633701bebb755 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81348 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-03-21mb/google/zork: Update APCB to increase UMA size to 128MBMatt DeVillier
The previous value of 32MB was set to meet Google's ChromeOS reqs, but hampers real-world performance in Linux/Windows, so increase it to 128MB to match the "auto" default for the Picasso UEFI firmware. TEST=build/boot Windows on google/zork (morphius), verify UMA set to 128MB. Change-Id: I8c6487a4cb8155f826d20fd3ceca87859829199c Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81364 Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
2024-03-21mb/google/brya: Create a tivviks variantSowmya V
This patch creates a new tivviks variant, which is a Twinlake platform. This variant uses Nivviks board mounted with the Twinlake SOC and hence the plan is to reuse the existing nivviks code. BUG=b:327550938 TEST= Genearte the Tivviks firmware builds and verify with boot check. Change-Id: Ia833a1dad45e13cd271506ade364b116c5880982 Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81262 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-20mb/google/brox: support ISHLi Feng
Set FW_CONFIG bit 21 to enable ISH PCI device and define ISH main firmware name so ISH shim loader can load firmware from file system. ISH also need to be enabled if STORAGE_UFS is set. BUG=b:280329972 TEST= Set bit CBI FW_CONFIG bit 21 Boot Brox board, check that ISH is enabled and loaded lspci shows: 00:12.0 Serial controller: Intel Corporation Alder Lake-P Integrated Sensor Hub (rev 01). Change-Id: Iadc5108c62737d27642a6948c00b5c122541aaba Signed-off-by: Li Feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80773 Reviewed-by: Tanu Malhotra <tanu.malhotra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Yuval Peress <peress@google.com>
2024-03-19mb/google/brox: Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFSAshish Kumar Mishra
Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS in brox Kconfig. This enables a single binary for both SKU1 and SKU2. For SKU2, upon boot from cold reset, it will disable the UFS Controller and then trigger a warm boot. BUG=b:329209576 BRANCH=None TEST=Boot image on SKU1/SKU2 and check S0ix working. Change-Id: Iabd0b3a83aa386e09310b671632368807a4018d4 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-03-19mb/google/nissa/var/craaskov: Update eMMC DLL settingsIan Feng
Update eMMC DLL settings based on Craaskov board. BUG=b:318323026 TEST=executed 2500 cycles of cold boot successfully on all eMMC sku Change-Id: I56f8329c28261c2bcae9d058da929be6763b293c Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Yang <simon1.yang@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-19mb/google/nissa/var/glassway: Tune I2C timings for 400 kHzFrank Chu
Update touchpad and touchscreen I2C timing. - Data hold time: 300ns - 900ns BUG=b:328724191 BRANCH=firmware-nissa-15217.B TEST=Check wave form and met the spec. I2C1 (touchscreen) Hold time from 83.58ns to 413.87ns I2C5 (touchpad) Hold time from 95.93ns to 425.27ns Change-Id: I65fb1298f9e96ab0b63aba436f6a319f21b38925 Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Shawn Ku <shawnku@google.com>
2024-03-19mb/google/nissa/var/glassway: Adjust touchscreen power sequencingFrank Chu
Adjust touchscreen power sequencing for eKTH5015M. The INX touch panel (eKTH5015M) contains a pull-up register which causes TCHSCR_REPORT_EN pull-up abnormally from Z1 power on.Because the t25 must be at least greater than 20ms, TCHSCR_REPORT_EN is initialized to GPO_L in the early stage (romstage) to meet the spec. BUG=b:328170008 BRANCH=firmware-nissa-15217.B TEST=Build and check I2C devices timing meet spec. [INFO ] input: Elan Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-ELAN0001:00/input/in4 Change-Id: I50f9c21ddee2bc9c1d313f63049cb587b4ae047a Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81135 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-17mb/google/nissa/var/anraggar: Add pen insert/remove for wakeupJianeng Ceng
Currently, inserting the pen does not wake the system, only removing the pen does. This is caused by the wake event configuration being DEASSERTED, so change it to ANY. BUG=b:328351027 TEST=insert and remove pen can wakes system up. Change-Id: Icdea995c2be04ea459e985f79269e49faf88248d Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-03-17mb/google/brya: Create bujia variantShon Wang
Create the bujia variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:327549688 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_BUJIA Change-Id: I453a50f1aa64f8d4119bf0f860d928aa3e00a144 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81198 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2024-03-17soc/intel/mtl: Enable RAMTOP caching at SoC level for MTL devicesSubrata Banik
This patch enables the `SOC_INTEL_COMMON_BASECODE_RAMTOP` configuration at the SoC level for all MTL devices. This change streamlines the configuration process, avoiding redundant selections on individual mainboards. BUG=b:306677879 BRANCH=firmware-rex-15709.B TEST=Verified boot functionality on google/ovis and google/rex. Change-Id: I3aa3a83c190d0a0e93c267222a9dca0ac7651f9c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2024-03-17mb/google/rex: Reland RAMTOP caching for OvisSubrata Banik
This patch ensures Ovis baseboard can select RAMTOP caching to improve the boot time w/o any runtime hang. BUG=b:306677879 BRANCH=firmware-rex-15709.B TEST=Verified boot on google/ovis with ~30ms savings in boot time. Change-Id: Ic0b73eb8fb9cd6ca70d3d7168b79dfd0fbc550e3 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2024-03-15mb/google/brya/var/xol: Modify clkreq to clksrc mapping for NVMeSeunghwan Kim
NVMe using clk_src[0] and clk_req[1] mapping to hardware design, Due to inconsistency between PMC firmware and FSP, we need to set clk_src to clk_req number, not same as hardware mapping in coreboot. Then swap correct setting to clk_src=0,clk_req=1 in mFIT. BUG=b:328318578 TEST=build firmware and veirfy suspend function on NVMe SKU DUT. Cq-Depend: chrome-internal:7063434 Change-Id: I1777310782a0f4417bd1bb21287bec5852be966e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81230 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-15brox: ish: Add Kconfigs for ISHYuval Peress
Modeled after the Rex Kconfigs for ISH. Change-Id: Ic670d550a9aaad64e52489d895b8aac2aee4b5ed Signed-off-by: Yuval Peress <peress@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81050 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-14mb/google/nissa/var/glassway: Add 2nd touchscreen via SSFC configFrank Chu
Define SSFC bit 0-1 in coreboot for add 2nd BOE G7500 touchscreen. BUG=b:329339069 BRANCH=firmware-nissa-15217.B TEST=Check touchscreen can detect and function work. [INFO ] input: GTCH7503:00 2A94:A804 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-GTCH7503:00/0014 Change-Id: I85688919864e3cac1beb2442ef3e23fe9d5f916c Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-13mb/google/brox: Enable EC SW SyncShelley Chen
Now that EC software sync has been verified to work on Brox, we can enable it by default. BUG=b:326152804 BRANCH=None TEST=Verify that SW sync occurs Change-Id: I3d356c006fc448125605761f7328d1f1e203a7c4 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81211 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-13mb/google/brya/var/omniknight: Pull down USI_REPORT_EN in romstageJamie Chen
Pull down USI_REPORT_EN(GPP_C6) in romstage to solve an abnormal peek pull high before BL_EN. Because power sequence no meet spec, pre #comment36, it may have ghost touch. BUG=b:326337003 TEST=FW_NAME=omnigul emerge-brya coreboot, measurement of HW and test touch detection by evtest Change-Id: I66f4a7915f135927fbc0a16254dece202dfc23a2 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80769 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-03-12mb/google/brya/var/xol: Use unified AP FW for UFS/Non-UFS SKUsSeunghwan Kim
Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS to use unified AP FW for UFS/Non-UFS SKUs. BUG=b:326481458 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I85c3c1c7ccaae9d46b66d3e7a2efea6dc9056188 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81107 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-03-11mb/google/brya: Create nova variantDavid Wu
Create the nova variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:328711879 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_NOVA Change-Id: Ie1cee43f0e2545288130bcc5152075603695c395 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
2024-03-09mb/google/brya/var/xol: Disable unused controllersSeunghwan Kim
Disable unused controllers in overridetree.cb by referring to xol proto2 schematics. Enabling unused controllers blocks entering s0ix. - I2C3 - SATA - PCIE RP8 - PCIE RP9 - GSPI1 BUG=b:328318578 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I1be7caf8234c32406aa2cff8fc7fe9fa39b16d89 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81105 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-09mb/google/brya/var/xol: Update psys_pmax value to 122WSeunghwan Kim
Update psys_pmax value to 122 from 145. This value is from internal power team. BUG=None BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I8bc58343d5736e2457db006972dc229e16d3fe59 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81104 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-09mb/google/brya/var/xol: Configure Acoustic noise mitigationSeunghwan Kim
Enable Acoustic noise mitigation for xol. The setting values are from internal power team. - Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_4 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=None TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I6165ae6ca73d1467a1d2cc7bd545298bd4c2f54f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81103 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-03-09mb/google/brox: Enable Wake on WLAN for SKU1Ashish Kumar Mishra
For SKU1, wake pin is WLAN_PCIE_WAKE_ODL. Update gpio config and corresponding ACPI for WoWLAN. BUG=b:327379404 BRANCH=None TEST=Boot image on SKU1 and check Wake on WLAN from S0ix. Change-Id: I04c35da2c9ac57cafdf7f7a35d83ab2e7a05fe4a Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-03-06mb/google/nissa/var/glassway: Tune eMMC DLL valuesDaniel Peng
Update eMMC DLL values to improve initialization reliability. BUG=b:327123701 TEST=Improve reboot on MB with eMMC smoothly. Change-Id: Ice9ee217acf7dc6e3e704bc82529e0b9a8faf184 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80779 Reviewed-by: Shawn Ku <shawnku@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Yang <simon1.yang@intel.com>
2024-03-05mb/google/oak: Don't build the ChromeEC codebase by defaultMartin Roth
Currently, the oak boards are the only boards that build the ChromeEC by default as a part of the coreboot build. As a part of replacing the chromeec submodule with a different build mechanism, disable this default. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Idd4fe45e52dbdd1c8dccf0d2c09d5cf6d61aa839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/81023 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-03-05mb/google/brya/var/xol: Add VGPIO configurations for PEG60Seunghwan Kim
Add VGPIO configurations for NVMe on PEG60. BUG=b:326481458, b:372086400 BRANCH=firmware-brya-14505.B TEST=Verified DUT could detect NVMe. Install ChromeOS into NVMe and boot from it. Change-Id: I5520dc2a4bf6e788701a774674d223b7e8ad5b44 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-05mb/google/nissa/var/gothrax: Add probe and GPIO config for touchpanelYunlong Jia
Add FW_CONFIG probe to separate touch panel settings. TOUCH_PANEL_ENABLE/TOUCH_PANEL_DISABLE Use different gpio tables based on the value of TOUCH_PANEL. BUG=b:325987249 TEST=emerge-nissa coreboot and run in DUT Change-Id: I23c62406a932815ff1cfafe05b70468b1f9cca54 Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kyle Lin <kylelinck@google.com>
2024-03-05mb/google/brya/var/dochi: Add wifi sar tableMorris Hsu
Add wifi sar table for dochi BUG=b:326137130 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Change-Id: Iaf90756eb318bef1ffcda9368a976c0ca209a100 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-04mb/google/guybrush: turn off SD ASPM L1.1/L1.2JasonNien
Turn off SD ASPM L1.1/L1.2 as w/a for wlan DMA resume failure We completed 4 runs for each of the 2 tests - power_idle and power_VideoCall. Here are the averages for both the tests: L1ss disabled SD plugged power idle test: 735.3875 L1ss enabled SD plugged power idle test: 737.2335 L1ss disabled SD plugged power video test: 333.29325 L1ss enabled SD plugged power video test: 333.442 BUG=b:254382832 TEST=test pass over 10k cycles Signed-off-by: Jason Nien <finaljason@gmail.com> Change-Id: I4d903f0f6333ffa18069e42be3c932aeae8013d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80237 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-04mb/google/brya: Enable CSE telemetry for ADL-NKapil Porwal
BUG=none TEST=Verify CSE telemetry data in boot time data on Yahiko. Before: ``` yahiko-rev9 ~ # cbmem -t 71 entries total: 0:1st timestamp 197,583 (0) ``` After: ``` yahiko-rev9 ~ # cbmem -t 76 entries total: 990:CSME ROM started execution 0 944:CSE sent 'Boot Stall Done' to PMC 49,000 945:CSE started to handle ICC configuration 49,000 (0) 946:CSE sent 'Host BIOS Prep Done' to PMC 51,000 (2,000) 947:CSE received 'CPU Reset Done Ack sent' from PMC 168,000 (117,000) 0:1st timestamp 195,861 (27,861) ``` Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I3f90d0462cb766655bf8e59a90bc550ceefb2256 Reviewed-on: https://review.coreboot.org/c/coreboot/+/79768 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-24 20:39:59 +0000