summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2024-09-04tree: Use boolean for emmc_enable_hs400_modeElyes Haouas
Change-Id: I41a877ed7f5f3d02904dc939b32996a7f6d45373 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_package_c_state_demotionElyes Haouas
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_c1_state_auto_demotionElyes Haouas
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for skip_ext_gfx_scanElyes Haouas
Change-Id: I569b9a69add341bcefe6bd5356b01a95a4e97286 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-09-03mb/google/brox/jubilant: Generate RAM IDsRen Kuo
Generate RAM IDs of lp5 memory: 1)Hyinx 4GB*4 H58G56BK8BX068 2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT BUG=None TEST=Run part_id_gen tool and check the generated files. Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-09-03mb/google/brox/jubilant: Modify FP IRQ pin to GPP_D13Ren Kuo
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT. The design change to follow the brox's GPE0 routing, and the FP wake source can be routed. BUG=b:363166664 TEST= Build jubilant firmware Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/cherry: Complete PCIe reset in romstageYidi Lin
De-assert PERST# at romstage to reduce the waiting time in ramstage. Before ``` [INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done, de-assert PERST# now [INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries) ``` After ``` [INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done, de-assert PERST# now [DEBUG] wait_perst_asserted: 457568 us elapsed since assert PERST# [DEBUG] wait_perst_done: 163413 us elapsed since de-assert PERST# [INFO ] mtk_pcie_domain_enable: PCIe link up success (1 tries) ``` BUG=none TEST=boot from NVMe Change-Id: I3a73bd574ae8f9f4e624846ce8b901a7d2209e78 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84118 Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-09-02mb/google/zork: Ensure eSPI GPIOs programmed w/o vbootMatt DeVillier
On the non-vboot boot path, eSPI is configured as part of fch_pre_init(), and we need to ensure that the mainboard sets the eSPI GPIOs properly before the common SoC code performs eSPI init. Use the mb_set_up_early_espi() function to set the eSPI GPIOs at the correct time. TEST=build/boot google/zork (morphius), verify keyboard functional. Change-Id: I03efe6def37a018c3de410523be21bf008174e94 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84148 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/zork: Ensure early GPIOs programmed w/o vbootMatt DeVillier
Now that zork can boot without vboot, ensure that the GPIOs set in verstage are programmed in bootblock on the non-vboot path. The eSPI GPIOs will be set in a subsequent patch using mb_set_up_early_espi() since setting them in bootblock_mainboard_early_init() would be too late given when the SoC eSPI init takes place. TEST=build/boot google/zork (morphius) w/o vboot Change-Id: I0bb49678b2d913c447d5bc761a6f0e00fca6334f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-09-02mb/google/nissa/var/teliks: Add fw_config fields for rtl8852becengjianeng
Add a new fw config field for wifi category as WIFI_6_8852, which is PCIe based. Also, enable WIFI_6_8852 for existing PCIe based wifi port as well as bluetooth port. BUG=b:356434907 BRANCH=NONE TEST=Verified Wifi6 module detection Change-Id: Ib6ba641c23cce7f1253022c9bb78b986b323bcaa Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84138 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/nissa/var/teliks: Force audio mute to avoid screen flickcengjianeng
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG=b:360243615 BRANCH=firmware-nissa-15217.B TEST:Verfied on Teliks and cannot reproduce the issue Change-Id: Iff488f6844c717ef24069c7176e7b8dfb07d8abc Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84137 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
2024-09-02mb/google/brox: Remove ACPI Power Resource for Bluetooth deviceKarthikeyan Ramasubramanian
Bluetooth driver in kernel requires reset-gpio in current resource settings (_CRS) and device specific data (_DSD) ACPI objects. Hence remove ACPI Power Resource for Bluetooth device so that the concerned ACPI objects get populated. BUG=b:362817900 TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and _DSP ACPI objects are filled in the SSDT with the required data. Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x004D } }) Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "reset-gpio", Package (0x04) { \_SB.PCI0.XHCI.RHUB.HS10, Zero, Zero, One } } } }) Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-09-02mb/google/brox/jubilant: Update dptf settingsRen Kuo
Update dptf settings from thermal design: 1) Remove fan control and active policy, since fan is controlled by EC. 2) Modify TSRs to 0:DRAM, 1:SOC, 2:Charger 3) Update Pl2 min&max values BUG=None TEST= Build jubilant firmware Generate and check ACPI SSDT.dsl $ cat /sys/firmware/acpi/tables/SSDT > SSDT $ iasl -d SSDT Change-Id: I2d59eedea9fb25565709e118abc1a14b4c2a64e7 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-09-02mb/google/brya: Add romstage early graphics for trulo baseboardSubrata Banik
1) Add all required changes for eSOL support. 2) Select MAINBOARD_USE_EARLY_LIBGFXINIT for Trulo. The CSOT (MNC207QS1-1) panel is used for the devicetree. BUG=b:362895813 TEST=On-screen text message seen during MRC training on Trulo SKU1. MRC: no data in 'RW_MRC_CACHE' bootmode is set to: 0 DP PHY mode status not complete DP PHY mode status not complete DP PHY mode status not complete ... Informing user on-display of memory training Change-Id: Ic34a8601b3084aa5f780d358fb0b15b7e820d375 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84128 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
2024-09-02mb/google/brox/var/lotso: Update verb tableJian Tong
Update verb table provided by Realtek on 20240710. Restults: SNR > 90 (spec>=90). BUG=b:349996984 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Change-Id: Ic4f03d09010efa7e32713b2697d5832255f64317 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83920 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-09-01tree: Use boolean for s0ix_enableElyes Haouas
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-08-29mb/google/rauru: Reset USB hub in bootblockYidi Lin
We have to reset the USB hub as early as possible. Otherwise the USB3 hub may not be usable in the payload. This design has been introduced since Cherry. TEST=build pass. BUG=b:317009620 Change-Id: Iea793b4b04bd009d0354e2331604bccf30466a23 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84024 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-29mb/google/rauru: Setup USB host in ramstageMingjin Ge
Add usb host function support. TEST=read usb data successfully. BUG=b:317009620 Signed-off-by: Mingjin Ge <mingjin.ge@mediatek.corp-partner.google.com> Change-Id: I5d081ff3e7367b87fab5ebdcb148c9005ab583f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-29mb/google/brya/var/nova: Configure scaler I2C GPIOsKenneth Chan
According to schematics, add GPP_H4/H5 configuration for scaler I2C pins (PCH_I2C_SCALER_SDA/SDL). BUG=b:358439747 TEST=emerge-constitution coreboot chromeos-bootimage. Build successfully and boot to verify I2C. Change-Id: Id831f594d6a57ed10867ae5ba05ae98c90ac7d9b Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84091 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-28mb/google/brox/var/lotso: Remove STORAGE_UNKNOWN fw_config optionKarthikeyan Ramasubramanian
With `probe unprovisioned` fw_config rule, there is no need to define an explicit STORAGE_UNKNOWN option. Hence remove it. BUG=None TEST=Build Lotso FW image. Change-Id: Ia170a6e006cb51e95fbaf3efe1106ca907165eca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84094 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-28mb/google/brox: Disable Thunderbolt deviceKarthikeyan Ramasubramanian
This feature is not required in Brox devices. Hence disable the concerned device. BUG=None TEST=Build Brox firmware and boot to OS. Ensure that the concerned device is disabled in the OS. Change-Id: I355852c780c552e6f9b2c28508f53580f392c1b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84093 Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
2024-08-28mb/google/nissa/var/anraggar: Force audio mute to avoid screen flickSimon Yang
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG:b=357764688 BRANCH=firmware-nissa-15217.B TEST:Verfied on Anraggar and cannot reproduce the issue Change-Id: I711dfd0803440e4b04f02849fed529c3872e023d Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28mb/google/nissa/var/nivviks: Prevent camera LED blinking during bootSowmya V
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. TEST=Build and boot nivviks. Monitor the camera LED blinking during boot. Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28tree: Use boolean for "eist_enable"Elyes Haouas
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
2024-08-27mainboard/google/rex: Remove HAVE_ACPI_RESUME for Intel Meteor LakeSubrata Banik
This patch removes the HAVE_ACPI_RESUME config option from the Google Rex mainboard configuration. The Intel Meteor Lake SoC does not support S3 (ACPI sleep state) entry/exit, and attempting S3 validation could lead to abnormal platform behavior. This change ensures that `_S3` is not listed as a valid wake source in the DSDT (Differentiated System Description Table) after booting to the OS. BUG=b:351025543 TEST=Booted google/rex successfully and verified that the `_S3` name variable is not present in the DSDT. Change-Id: I730ade628eea84c60ba003a0c871e729b0ee0a9f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84081 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-26nb/intel/haswell: Move SPD addresses to devicetreeKeith Hui
Introduce a sandybridge-style devicetree setting for SPD addresses, and use it instead of runtime code in mb_get_spd_map() for all haswell boards without CONFIG(HAVE_SPD_IN_CBFS) - effectively all boards except google/slippy. Patch also covers recently added Z97 boards using Broadwell MRC. Also update util/autoport to match. abuild passes for all affected boards. autoport builds, but otherwise untested. Change-Id: I574aec9cb6a47c8aaf275ae06c7e1fb695534b34 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79025 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-25Revert "mb/google/brya/var/xol: Change touchpad I2C interrupt type to GPIO_INT"Seunghwan Kim
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807. Reason for revert: We applied this patch for touchpad stuttering issue for XOl, but the same touchpad problem was reported. So we would revert this change and apply kernel patch (crrev/c/5808335) to avoid the touchpad issue. Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-24mb/google/rauru: Initialize flash controller in bootblockJarried Lin
Initialize SPI NOR Flash Controller (SNFC) in the bootblock. TEST=read nor flash data successfully. BUG=b:317009620 Change-Id: I88960ce7a50f67ea6f402884b714cb205836a6d8 Signed-off-by: Noah Shen <noah.shen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83924 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-24mb/google/skyrim: Combine the function port_descriptors for variantsZheng Bao
Remove the weak function. Combine all the getting descriptors together. BUG=b:279144932 TEST=Build Change-Id: I981e9c52c8e5fa32296e2e43be47411557133691 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83646 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-08-24mb/google/nissa/var/nivviks: enable WIFI_SARDavid Wu
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG for WIFI_CATEGORY to choose the right wifi_sar hex file. Below is the file mapping: wifi_sar_0.hex = wifi6 wifi_sar_1.hex = wifi7 BUG=b:345596420 TEST=emerge-nissa coreboot chromeos-bootimage Cq-Depend: chrome-internal:7607427 Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/dedede/var/awasuki: Modify DPTF parametersWei Hualin
Modify DPTF parameters from thermal team. 1. Add TCHG. 2. Modify the charging limit. BUG=b:360066326 TEST=Modify Thermal according to design requirements Change-Id: Ia7050b552656a70da0c992e4f54b02ccb6a7c114 Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83929 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar
2024-08-23mb/google/nissa/var/riven: Set VccIn Aux Imon IccMax to 25ADavid Wu
Iccmax of VccIn_Aux is 25A with MBVR design. BUG=b:348258637 TEST=Local build successfully and boot to OS normally. Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-08-23mb/google/nissa/var/sundance: Adjust GPIO GPP_C1 to no_pull-upRoger Wang
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table. BUG=b:358472598 TEST=Build and verified test result by EE team Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/nissa/var/nivviks: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: I0908ff500434401bf89a5313427cf304f32cf929 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2024-08-23mb/google/nissa/var/riven: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-22mb/google/brox/var/jubilant: Enable devices on unprovisioned fw_configRen Kuo
Add the condition of unprovisioned fw_config to enable all storages and devices. It's for first boot on all storags and preliminary test in factory when fw_config is unprovisioned. BUG=None TEST=Build jubilant firmware and boot to OS on storages when fw_config is unprovisioned and ensure all devices are enable. Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/brox: Enable storage devices on unprovisioned fw_configKarthikeyan Ramasubramanian
Storage devices are very critical to boot to OS. When probe list is defined for storage devices, all of them get disabled when fw_config is unprovisioned - a typical situation in the factory. Fix this by configuring the storage devices in device/override tree to probe and enable them when fw_config is unprovisioned. BUG=None TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned. Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/nissa/var/teliks: Adjust usb2 pin of wlanzengqinghong
Since the voltage value measured by the USB2 pin of the wlan is 500mv, it does not meet the design requirements. Adjusting the port length can reduce the voltage to 450mv, which meets the expected settings. BUG=b:361037189 TEST=1. The voltage measurements are as expected. 2. The Bluetooth and WiFi functions of the wlan module are verified to be normal. Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508 Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-08-22mb/google/volteer/var/drobit: Set UART GPIOs in bootblockMatt DeVillier
Enables early serial console for debugging. TEST=build/boot drobit, verify console output available starting in bootblock on CPU UART (/dev/ttyUSB1) vs ramstage. Change-Id: If94eb8caca3469143433fef06b972050f886be6a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-08-22mb/google/dedede: enable Intel CrashLogJędrzej Ciupis
Enable Intel CrashLog diagnostic feature by default on all Google Dedede variants. BUG=b:354834461 TEST=Built for Google Dedede and verifed that CrashLog is enabled by default. Change-Id: Ib0487bd6a5bfdad2a80fd0787e009e48f4527d38 Signed-off-by: Jędrzej Ciupis <jciupis@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-08-21mb/google/byra/var/kinox: Add/update VBT filesMatt DeVillier
Kinox has two VBT options, selected via fw_config. Add the second option to CBFS, and update the original file. Extracted from Google_Kinox.14505.704.0.bin. TEST=build/boot kinix, verify firmware display init successful and payload menu visible. Verify correct VBT selected via cbmem log. Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/goog/brox: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify brox DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/goog/rex: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify rex DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I3fdc02a82d197fd2b075e0a66c578149cef3a69f Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-21mb/goog/brya: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=firmware-brya-14505.B TEST=verify brask, nissa, or brya DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-20mb/google/ovis/var/deku: Set TCC_offset to 12Tony Huang
Adjust settings as recommended by thermal team. Set tcc_offset value to 12 in devicetree. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I0ae97bb0b2dbb2fe8f35221522506ec1f7da47f6 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83971 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-20mb/google/nissa/var/riven: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: I87cfbdd0b8a97d84a96af373855219c60f39f173 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-20mb/google/nissa/var/nivviks: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: Ib654f22033c68edbc602f14537aaa2151800598d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83943 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/brox/jubilant: Update fw_configMorris Hsu
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting. BUG=None TEST=emerge-brox coreboot Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot. Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-08-19mb/google/dedede/var/awasuki: Adjust I2C frequency to less than 400 KHzWei Hualin
Before: I2C2 - 431KHz I2C4 - 413KHz After: I2C2 - 364KHz I2C4 - 370KHz BUG=b:351968527 TEST=Rate of the actual measured machine is pass. Change-Id: Ieb75db1dc95ffd5ca806a194ae678c700fa0741c Signed-off-by: Wei Hualin <weihualin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83906 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-08-19mb/google/brya/var/nova: Set up soundbar-related GPIOsKenneth Chan
Set up soundbar-related GPIOs for updating. BUG=b:358435383 TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I517da8de90487533e49e46649c5acf4ccfcc5160 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83936 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/nissa/var/sundance: Adjust WWAN GPIO sequenceRoger Wang
This patch removes WWAN configuration from the bootblock. It appears that setting it up in the bootblock may not be necessary. Configure in bootblock,the seq will be triggered at the same time. The customer would like us to leave some buffer for EN to RST. BUG=b:357764679 TEST=Build and verified test result by EE team Change-Id: I2c0e789c0bec293f4bca711e53644d62f4f83551 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83792 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-17mb/google/brya: Reset XHCI controller while preparing for S5Subrata Banik
This patch calls `xhci_host_reset()` function to perform XHCI controller reset. Currently, the PMC IPC times out while sending the USB-C (0xA7) command during poweron from S5 (S5->S4->S3->S0). On Brya variants, poweron from S5 state results in PMC error while sending PMC IPC (0xA7) to USB-C active ports, log here: localhost ~ # cbmem -c | grep ERROR [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x200a7 failed [ERROR]  pmc_send_ipc_cmd failed [ERROR]  Failed to setup port:0 to initial state [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x200a7 failed [ERROR]  pmc_send_ipc_cmd failed [ERROR]  Failed to setup port:1 to initial state [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x20a0 failed This problem is not seen while powering on from G3 (G3->S5->S4->S3->S0). During poweron the state of USB ports are not the same between S5 and G3 and it appears that the active USB port still is in U3 (suspend) while PMC tries to send the IPC command, which results in a timeout. This patch utilises the S5 SMI handler to reset the XHCI controller using `xhci_host_reset()` prior entering into the S5, it helps to restore the port state to active hence, no PMC timeout is seen with this code change. Supporting Doc=Intel expected to release a TA (Technical Advisory) document to acknowledge this observation and supported W/A for ADL generation platforms. Till that time, keeping this W/A as part of the google/brya specific mainboard alone. Note: other ADL-SoC based mainboards might need to apply the similar W/A. BUG=b:227289581 TEST=No PMC timeout is observed while sending USB-C PMC command (0xA7) during resume from S5. Total Time: 1,045,855 localhost ~ # cbmem -c | grep ERROR No PMC timeout error is observed with this CL. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibf06a64f055a0cee3659b410652082f31e18e149 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-15mb/google/brox/jubilant: Disable devcies and GPIOs by fw_configMorris Hsu
1.Set unused device's GPIOs to NC based on fw_config. 2.Disable config for nvme, ufs and CNVi based on fw_config. 3.Add fw_config STORAGE_UNKNOWN to enable all storages for the first boot in factory. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge check fw_config messages in ap log verify devices on/off by fw_config on jubilant Change-Id: I8d9f4edea454e0861f91261bf13fa80572d0a181 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-15mb/goog/brya: Don't lock GPP_F15 (FPMCU_INT_L)Nick Vaccaro
Locking GPP_F15 causes DUTs with fingerprint sensor to not be able to correctly power down and stay powered down. This pin does not need to be locked. BUG=b:359692570, b:356750516 BRANCH=firmware-brya-14505.B TEST=`FW_NAME=gimble emerge-brya coreboot chromeos-bootimage`, flash and boot gimble into developer mode, then reboot into dev screen and select the "Power off" button and verify gimble powers off and does not power itself back up. Change-Id: I1c73035b02021b0d1268cd46dcd0841621556ad5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83932 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-15mb/google/dedede/var/awasuki: Enable HECI 1Weimin Wu
The AP console log contains "HECI: No CSE device" and the system cannot be entered. BUG=b:359474142 TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki The "HECI: No CSE device" message for AP log disappered Change-Id: I488056dc8bca2174dd96c28793e3202b7aae890c Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83905 Reviewed-by: Tongtong Pan <pantongtong@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-14mb/google/octopus/var/phaser: Update VBTMatt DeVillier
Extracted from coreboot-Google_Phaser.11297.296.0.bin. Fixes display init on newer LASER14 boards. TEST=build/boot google/phaser, observe display init successful. Change-Id: Icb48edb4e74f147e3458f845d921a15a2d1906da Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83897 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-14mb/google/nissa/var/riven: Disable external fivrDavid Wu
In next phase, riven will remove external fivr. Use the board version to config external fivr for backward compatibility and show message. BUG=b:359062365 TEST=build, boot to OS, suspend/resume work normally. Change-Id: Id5f538b2eda7820a922b8d9ee14b2bae7df3726c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-14mb/google/brox: Remove Mainboard Prepare to Sleep(MPTS) ACPI methodKarthikeyan Ramasubramanian
Brox does not have PCIe WWAN or discrete GPU. Hence no need to power them off during suspend. Hence also remove the MPTS ACPI method. BUG=None TEST=Build Brox firmware and boot to OS. Change-Id: Ia239c3f038ce31934efb0a391350fa0f786e3fcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83788 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-13mb/google/brox: Do not override GPIO PMKarthikeyan Ramasubramanian
Brox uses Ti50 which always supports long interrupt pulse. Hence no need to override GPIO PM. BUG=None TEST=Build Brox firmware and boot to OS. Perform suspend/resume for 25 cycles. Change-Id: I6a138c1953714bc29570db587594cab8f315a4ec Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83856 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-13mb/google/brya/var/nova: Enable TCSS XHCI settingPranava Y N
This patch enables the TCSS XHCI in the devicetree to solve the genesys hub enumeration issue. BUG=b:348332200 TEST=Able to build google/nova and ensure lsusb can list genesys hub device. Change-Id: Ic8e25756a2975e884434c4c7e3d587f4c1f0ed0b Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83845 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-13mb/google/nissa/var/pujjoga: Modify GPP_C1 settingLeo Chou
Confirm with EE, the GPP_C1 don't need PU 20K. So modify GPP_C1 setting to remove PU 20k Schematic version: 500E_GEN4S_ADL_N_MB_0418 BUG=b:358162951 TEST=Build and boot on pujjoga. Change-Id: I7ad16cd29ab467d3eac74dab40522c577d91c747 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83818 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-13mb/google/nissa/var/pujjoga: Modify P sensor settingLeo Chou
1. The P sensor need follow WWAN FW_CONFIG to enable/disable 2. Modify GPP_H19 setting to PAD_CFG_GPI_APIC to fix PLT test fail Schematic version: 500E_GEN4S_ADL_N_MB_0418 BUG=b:357998089 TEST=1. Boot to OS and verify the P sensor devices is set based on fw_config. 2. Confirm that the PLT test can pass successfully. Change-Id: Ic3610180c8cf99eba9367e26bfc3666410af19f7 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-13mb/google/nissa/var/riven: Add elan touchscreen supportDavid Wu
This change adds the necessary configuration for the elan touchscreen (ELAN9004) device, connected to I2C bus 16. It includes settings for: * HID descriptor * Device description * IRQ configuration * Detection * Reset, stop and enable GPIOs with their respective delays * Power resource handling * HID descriptor register offset BUG=b:348125053 b:348126380 TEST=emerge-nissa coreboot boot with elan TS, make sure elan TS is functional. Change-Id: I64c5a11dfaacfcca34240375d4dca5c76a60f62e Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83876 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-11tree: Use boolean for pch_hda_sdi_enable[]Elyes Haouas
Change-Id: I27568d1205216f697b48ffb09ce5208505718978 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83863 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brox/jubilant: update overridetree for dptf settingsMorris Hsu
Update dptf settings for EVT. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge Change-Id: Iadc95c14da6f879e25dac4804907e340dc16e47f Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83842 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brox/jubilant: update overridetreeMorris Hsu
Update touchpad settings. BUG=b:342867386 TEST=ensure touchpad is working. Change-Id: Ibf62470b7fd921065201894a63d7e2a83dad53ce Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-11mb/google/nissa/var/teliks: Configure TPM IRQ for telikszengqinghong
Add TPM TIS ACPI interrupt configuration, set teliks's `TPM_TIS_ACPI_INTERRUPT` to 13. BUG=b:352263941 TEST=emerge-nissa coreboot Change-Id: Iaed51e0bb8abac0ed0b35bfcf12e95fd34f92242 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83832 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-11mb/google/nissa/var/teliks: Add DP AUX BIAS connectzengqinghong
Because one side is not displayed when using type-c projection, the configuration of DP AUX BIAS to SOC direct connection is added. BUG=b:352263941 TEST=DP function of MB and DB workable Change-Id: Id89d02212cdad549d1c26ed51a8d5af0f4e757c6 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83829 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brya/variants: Enable pch_hda_sdi_enable for trulo baseboardDinesh Gehlot
This patch enables pch_hda_sdi_enable for the trulo baseboard and removes SDI lanes update from its variants. BUG=b:350931954 TEST=Boot verified on google/craask and google/tivviks Change-Id: I2e0f43b8fffb5e583089769d2c7446b476ce5d5d Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83859 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-10mb/google/rex/var/rex0: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345373187 TEST=Build and test on google/rex0, check BRDS is shown in SSDT. Change-Id: I28541e7a23dd486d3e0ec38ee89e1ab13595fc72 Change-Id: I82f6290cb1934e2c0597286702f93e3789e8f345 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com>
2024-08-10mb/google/rex/var/karis: Set PCIE WLAN bluetooth companion deviceTyler Wang
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345373187 TEST=Build and test on karis, check BRDS is shown in SSDT. Change-Id: I28541e7a23dd486d3e0ec38ee89e1ab13595fc72 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83791 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com>
2024-08-10Revert "mb/google/rex: Set cnvi_wifi bluetooth companion device"Subrata Banik
This reverts commit 1f1d8d2bcae64baea19d0e947ba5572a45f46eec. Reason for revert: Intel® Wi-Fi 6E AX211 (CNVi) does not need Bluetooth Regulator Domain Settings and therefore, the bluetooth companion device declaration for CNVi is unnecessary. BUG=b:345373187 TEST=Able to build and boot google/karis. Change-Id: I296ddb93659af144e1a82a6b8219c9811c5fe545 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83843 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-10tree: Remove unused <smbios.h>Elyes Haouas
Change-Id: Iab7e9f3d17c87576761333c4b62c40eea5e424a5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-08-09mb/google/brox/jubilant: Add Fn key scancodeMorris Hsu
The Fn key on jubilant emits a scancode of 94 (0x5e). BUG=b:324079605 TEST=Flash jubilant, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I963b0aa85598097fea69ec34d1e79ec0bbec3db3 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83821 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-09superio/ite,mb: Switch to new ITE GPIO driverMichał Żygowski
Refactor mainboards' code to use the new GPIO driver. TEST=Put Google Jecht to S3 sleep and check if the LED blinks. Change-Id: I707ee090ee2551b4935847e12ade678d36ff9302 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-08-09mb/google/brox/var/jubilant: Add SAR sensor SX9324Ren Kuo
Add SAR Sensor SX9324 for WWAN: - Apply DRIVERS_I2C_SX9324 - Config GPP_H19 for IRQ - Add SX9324 registers settings based on tuning value from SEMTECH. Refer to datasheet: https://chromeos.google.com/partner/dlm/avl/component/3624/ BUG=b:345327104 TEST=Build and verify on jubilant Change-Id: I629117f20ca513dc0c8eaa91744ad33e162ba4bb Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83779 Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-09mb/google/brox/var/lotso: Enable wifi sarKun Liu
wifi.SetTXPower test fail, so enable wifi sar. BUG=b:351698478 TEST=emerge-brox coreboot Change-Id: Ibf5425e72eddc45e376ef4e2d077180dab502200 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-09mb/google/nissa/var/riven: Add G2 touchscreen supportDavid Wu
This change adds the necessary configuration for the G2 Touchscreen(GTCH7503) device, connected to I2C bus 40. It includes settings for: * HID descriptor * Device description * IRQ configuration * Detection * Reset and enable GPIOs with their respective delays * Power resource handling * HID descriptor register offset BUG=b:350844195 TEST=emerge-nissa coreboot boot with G2 TS, make sure G2 TS is functional. Change-Id: If17367cd62eb69a1237efe4aa3ca1a0c9640ba4c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83823 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-09mb/google/trulo: Enable EC MKBP deviceAmanda Huang
MKBP device is required for passing events from input sources to AP. Input sources include buttons (power, volume); switches (lid, tablet mode) and sysrq. BUG=b:357521411 TEST=Build coreboot and switch tablet mode on orisa. Change-Id: Ic712f53fb4063347c38df05167f0100afc06f979 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83819 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-09mb/google/fatcat: Add support for soldered-down memorySubrata Banik
This change adds support for soldered-down memory on the Fatcat board. It introduces a new Kconfig option `MEMORY_SOLDERDOWN` and includes the necessary Makefiles adjustments to handle SPD data in CBFS when this option is enabled. * A new Kconfig option `MEMORY_SOLDERDOWN` is added to control soldered-down memory support. * When `MEMORY_SOLDERDOWN` is enabled, it selects: * `CHROMEOS_DRAM_PART_NUMBER_IN_CBI` if `CHROMEOS` is enabled * `HAVE_SPD_IN_CBFS` * The Makefile is updated to include the `variants/$(VARIANT_DIR)/ memory` subdirectory and conditionally include the `spd` subdirectory based on `CONFIG_HAVE_SPD_IN_CBFS`. BUG=b:348678071 TEST=Able to build google/fatcat with N-1 silicon. Change-Id: I7edc1134630940812186118a29cbbd550f0e3634 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Pranava Y N <pranavayn@google.com>
2024-08-09mb/google/fatcat: Generate LP5 RAM ID for `H58G56BK7BX068`Subrata Banik
Add the support LP5 RAM parts for fatcat: DRAM Part Name ID to assign H58G56BK7BX068 0 (0000) BUG=b:347669091 TEST=emerge-fatcat coreboot Change-Id: Idcdbbcd42dc6b1c8b13a89b1ace5b2973dde6d2b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83824 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
2024-08-09mb/google/brya: Enable storing ISH FW version for truloSubrata Banik
This change enables storing the ISH firmware version on the Trulo baseboard by selecting the `SOC_INTEL_STORE_ISH_FW_VERSION` config option. BUG=b:354607924 TEST=Able to dump ISH version on trulo. > cbmem -c | grep ISH [DEBUG] ISH version: 5.4.2.7780 Change-Id: I69a7fa19c53f435ef1f6306b259f703c7b196137 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83820 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-08mb/google/dedede/var/awasuki: Add Fn key scancodeWeimin Wu
The Fn key on awasuki emits a scancode of 94 (0x5e). BUG=b:355538142 TEST=Flash awasuki, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: Ic7aa183bf314fed4901133dc70d848d84fab0784 Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-08mb/google/dedede/var/awasuki: Enable ELAN touchscreen with fw_configWeimin Wu
1. Change driver form i2c/hid to i2c/generic. 2. Add fw_config for touchscreen. BUG=b:351968527 TEST=ectool cbi set 6 0x0x10200a0; touchscreen functions normally; Change-Id: Ifd6330be8924d4873f0efab3ce404168a62099eb Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83704 Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-08mb/google/brya/var/trulo: Update ISH GPIO's configurationVarun Upadhyay
This patch configures the GPIO pins to enable ISH on the Trulo device, in accordance with schematic_20240607. BUG=b:354607924 TEST=Builds successfully for google/trulo. Change-Id: I3af478762e0a0aa35a2698e0ed87a4d8c24362f0 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83781 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-08mb/google/brya/var/orisa: Update ISH GPIO's configurationVarun Upadhyay
This patch configures the GPIO pins to enable ISH on the Orisa device, in accordance with schematic_20240607. BUG=b:354607924 TEST=Builds successfully for google/orisa. Change-Id: I24745ba629c59c092ce676b29915e356a4d8d8af Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83656 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2024-08-07mb/google/brox: Tune Touchpad I2C parametersKarthikeyan Ramasubramanian
Adjust Touchpad I2C fall time configuration such that it meets the I2C fast mode specification(<= 400KHz). BUG=b:328670295 TEST=Build Brox firmware and boot to OS. Confirm the I2C bus frequency(375 KHz), rise(650 ns) and fall(330 ns) times meet the specification. Change-Id: I0006bfb9bb5839ffa1248d9f2ea055160ed0936e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83755 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2024-08-06mb/google/brox/var/jubilant: Update WWAN and UsbCam SettingsRen Kuo
Update GPIOs for WWAN and USB Camera functions. BUG=b:341188351 TEST=Build and verify on jubilant Change-Id: I145aa994767ddc59be519b96017af71badf82734 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2024-08-06mb/google/trulo: Register Firmware name for ISHVarun Upadhyay
Define ISH main firmware name so ISH shim loader can load firmware from file system. BUG=b:354607924 TEST=Boot trulo board, check that ISH is enabled and loaded lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671 Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-05mb/google/dedede/var/awasuki: Disable SD cardWeimin Wu
Because Awasuki doesn't have SD card, disable related configurations. BUG=b:351968527 TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki Change-Id: I1b0d2a9c2f9cdd4bca7c30cdc454ffa84b293146 Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83706 Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-05mb/google/brox: Add model brox-ti-pdcBob Moragues
BRANCH=None BUG=b:348171026 TEST=Test on TI PDC device Cq-Depend: chromium:5691079 Cq-Depend: chromium:5691080 Cq-Depend: chrome-internal:7464767 Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6 Original-Signed-off-by: Bob Moragues <moragues@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110 Original-Reviewed-by: YH Lin <yueherngl@chromium.org> Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-04mb/google/brya/var/nova: Adjust Type-C port to USB 2.0 onlyPranava Y N
This patch introduces the following changes, - Remove TCSS XHCI (USB 3.x) devicetree settings - Update Over Current (OC) & USB 2.0 config - Update TCSS-XHCI capabilities BUG=b:348332200 TEST=Able to build google/nova and ensure lsusb can list genesys hub device. Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380 Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-04mb/google/brya/var/nova: Remove PMC MUX settingPranava Y N
This patch removes the PMC MUX related setting from devicetree as Nova doesn't include a MUX for it's USB-C port. BUG=b:348332200 TEST=Able to build google/nova Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489 Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-03mb/google/rex: Skip UART0 config in FSPSubrata Banik
UART0 is already configured in coreboot, so this change sets SerialIo config for UART0 to PchSerialIoSkipInit to skip initialization in FSP. BUG=none TEST=Able to build and boot google/rex0. Able to see all debug prints over CPU uart. Change-Id: I37744f05083eb82ba8ca579b628b69aa976e3d1f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83750 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-02mb/google/brya/var/trulo: Remove mux references from typec portAmanda Huang
The Type-C kernel driver no longer programs the AP mux. So remove device references to the TCSS Mux control device from the Type-C port driver. BUG=b:351117685 TEST=USB-C drive can be detected after system warm or cold reboot. Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-02mb/google/brox/var/greenbayupoc: update ALC236 verb tableWu Garen
The previous uploaded verb table is not fully applied due to configuration error. Uploaded the verb table provided by Realtek which can be found in b:336967284. BUG=b:326412504, b:336967284 TEST=deploy and check volume Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Terry Cheong <htcheong@chromium.org>
2024-08-02mb/google/brox/var/brox: Enable Class-D calibrationTerry Cheong
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV. Add a section in the verb table to enable class-D calibration based on the updated verb table provided by Realtek in b:342506575 comment#6. This improves the offset to be less than 1mV. BUG=b:342506575 BRANCH=main TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \ playing -100dB sine waves. Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-01mb/google/brox: Create jubilant variantRen Kuo
Create the jubilant variant of the brox reference board by copying the template files to a new directory named for the variant. BUG=b:348543712 TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_JUBILANT. Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-08-01mb/google/nissa: Create teliks variantzengqinghong
Create the teliks variant of the nissa reference board by copying the anraggar files to a new directory named for the variant. BUG=b:352263941 BRANCH=None TEST=1. util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TELIKS 2. Run part_id_gen tool without any errors Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768 Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-01mb/google/brya/var/orisa: Remove mux references from typec portAmanda Huang
The Type-C kernel driver no longer programs the AP mux. So remove device references to the TCSS Mux control device from the Type-C port driver. BUG=b:351117685 TEST=USB-C drive can be detected after system warm or cold reboot. Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 20:16:52 +0000