summaryrefslogtreecommitdiff
path: root/src/mainboard/google
AgeCommit message (Collapse)Author
2024-06-07mb/google/brya/var/xol: add support for wifi sar tableYH Lin
Add wifi sar table support for xol. Bit 31 in CBI/FW_CONFIG is used to select different sar table (index 0 or 1) but only 0 is in used at the moment. BUG=b:344274789 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Change-Id: Id4dc74c4f2a807d2e531b419ecb7b590d4c32ac2 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07mb/google/brox/var/brox: update thermal settings to start fan earlySumeet Pawnikar
Current existing temperature thresholds of TSR1 sensor are set at 60C to start fan. Due to this CPU gets hot and temperature goes over 80C. In this situation, fan does not even start to lower down CPU temperature. With updated new settings based on tuning from thermal team, start fan early at 40C for TSR0 and TSR1 so the CPU temperature stays below 80C. BUG=b:339493551 TEST=Built and tested on google/brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I4765c13c10e436733d8c9d017085968daa561ccc Reviewed-on: https://review.coreboot.org/c/coreboot/+/82784 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-07mb/google/rex0: Restore SSD power sequencing GPIOs in ramstageSubrata Banik
This change restores the EN_PP3300_SSD GPIO configuration in the ramstage for the Rex0 variant. This is necessary to enable testing of RO lockdown scenarios on FSI'ed Screbo devices, where bootblock changes are not applicable. Additionally, ensures locking the GPIO PAD from getting misconfigured after booting to OS. BUG=b/337971452 BRANCH=firmware-rex-15709.B TEST=Able to boot google/rex with RO locked to an older version without SSD GPIO refactored, and RW is with the latest revision. Change-Id: Ia7564b14a20d00e9bb2c9466b7a737dd97f01351 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-06-07mb/google/nissa/var/pujjoga: Add wifi sar tableLeo Chou
Add AX211 and AX203 wifi sar table for pujjoga wifi sar config. Use fw_config to separate different wifi card settings. WIFI_SAR_TABLE_AX211: 0 WIFI_SAR_TABLE_AX203: 1 BUG=b:336167281 Test=emerge-nissa coreboot Change-Id: If0f542cb13e93e99960bf65d616b26cee7617a43 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-06-07mb/google/nissa/var/pujjoga: Add FW_CONFIG probe for WWAN devicesLeo Chou
Add FW_CONFIG probe based on pujjoga boxster of below devices: WWAN Schematic version: 500E_GEN4S_ADL_N_MB_0418 BUG=b:336167281 TEST=Boot to OS and verify the WWAN devices is set based on fw_config. Change-Id: I94cb9ffe47888a8b7b5c6837ddfc390a1d2e77d1 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-07mb/google/dedede/var/boten: Add new supported memory partLeo Chou
Add bookem new supported memory parts in mem_parts_used.txt. Generate SPD id for this part. Zilia SDVB8D8A34XGCL3N3T BUG=b:344482259 TEST=Use part_id_gen to generate related settings Change-Id: I1cbf641e2bbe4fd4eea02a1bfa3d6b3c06e567e4 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82783 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-07mb/google/brask/var/bujia: fix type-c USB2 problemShon Wang
Enable type-c port 0 USB2 function. BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I0d7adc329a8c26941957d7a7472a5166b07bda5b Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82903 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-07mb/**/hda_verb: Use `AZALIA_PIN_CFG_NC(0)`Angel Pons
Replace `0x411111f0` with `AZALIA_PIN_CFG_NC(0)`, which evaluates to the same value and conveys additional information to the reader. Done with a bulk search and replace operation. Change-Id: Ibd84daec017bc1ab1ee4edd906fda80231c134cc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-06-06mb/google/brox/var/lotso: Add dq map settingJian Tong
Based on lotso EVT schematics add dq map settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I4f03e8a90522cbf2fe06f4160414202dcc4a2199 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82600 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
2024-06-05mb/google/brox/var/lotso: Update gpio settingJian Tong
Based on lotso EVT schematics update gpio settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I13485cc7ccd8b15352f5e21ad9336aa2b3d35749 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82573 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-06-05mb/google/trulo/var/orisa: Configure TPM IRQ for orisaAmanda Huang
Set GSC_SOC_INT_ODL to GPP_A17 instead of GPP_A13. BUG=b:333486830 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I065fdf2a66036c6df1e16dda3b2a684b5202cccc Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82717 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-04mb/google/brya/var/xol: Enable FSP UPD LpDdrDqDqsReTrainingSeunghwan Kim
Set LpDdrDqDqsReTraining to 1 for xol. Value 0 will cause black screen issue. Reference: https://review.coreboot.org/c/coreboot/+/79527 > FSP default value for LpDdrDqDqsReTraining is 1. For boards > that didn't set LpDdrDqDqsReTraining to any value, 0 was being > assigned and it caused black screen issue. BUG=b:332980211 BRANCH=brya TEST=Built and verified there is no black screen issue during power on/off test for over 100 cycles. Change-Id: Ia346ce559b4509ea1a63abe28b12ad909f9b7b0d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82778 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-04mb/google/brask/var/bujia: change ALC5650 to ALC5682I-VSShon Wang
Due to system spec change, change audio codec ALC5650 to ALC5682I-VS BUG=b:329787697 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I38e5c58b3ef3fbe709b98601975ae3821bb77213 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-31mainboard/google/rex: Enable Rex64 build configurationSubrata Banik
- Add Rex64 board to Kconfig menu - Enable building for Rex64 with x86_64 support Change-Id: I02e2c49b4aeb2cb98d9d0cb66717db18c3f96d45 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82625 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-31mb/google/brya/var/nova: Update USB ports settingKenneth Chan
Update used USB port[2][3](type-a) setting for nova. BUG=b:328711879 TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I63cf97b23627feac05743f2a6e514a33fcaf7dff Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82703 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-05-31mb/google/trulo: Support OCP fault on A0/1 portsPranava Y N
The devicetree entry and gpio.c updated as per the schematics of Trulo to map the OC fault signals from A0/A1 USB ports. BUG=b:335858378 TEST= Able to build google/trulo Change-Id: Ic17debc5eecebca8c000c43a660e1b52d2932f2a Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82637 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-05-29mb/google/nissa/var/sundance: Add WWAN power off sequenceLeo Chou
Sundance support FM101 WWAN, use wwan_power.asl to handle the power off sequence BUG=b:343139385 TEST=Build and boot on sundance Change-Id: I82085172db370ab5a6c0f77afe6042c53b89e43e Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29mb/google/nissa/var/pujjoga: Update touchscreen IC settingsRoger Wang
Modify the Goodix touchscreen from new vendor and remove 3 unused touchscreens. According to the information provided by the key-part team. BUG=b:340689681 TEST=Build and check Goodix touchscreen can work. Change-Id: I1e6349e80431aadf27cd72b8439b01f95348071d Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82427 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29mb/google/nissa/var/sundance: Update eMMC DLL settingsRoger Wang
Currently Samsung eMMC (KLMBG2JETD-B041) can't power on to OS nomally. According to Intel provides eMMC DLL delay patch that tuning on each Sundance different eMMC system to modify some system can't boot to OS problem. BUG=b:342057438 TEST=Build and check each SKU eMMC can work. Change-Id: I29d4305bbe5f91d822d947cae942b654e80a8a57 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82602 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29tree: Remove unused <string.h>Elyes Haouas
Change-Id: I9ed1a82fcd3fc29124ddc406592bd45dc84d4628 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-29tree: Use <stdio.h> for snprintfElyes Haouas
<stdio.h> header is used for input/output operations (such as printf, scanf, fopen, etc.). Although some input/output functions can manipulate strings, they do not need to directly include <string.h> because they are declared independently. Change-Id: Ibe2a4ff6f68843a6d99cfdfe182cf2dd922802aa Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82665 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-28mb/google/brox: Add romstage early graphicsSowmya Aralguppe
Select MAINBOARD_USE_EARLY_LIBGFXINIT for brox to enable SOL image. This patch enables Sign of Life image during MRC training. BUG=b:335369811 TEST=Able to boot to ChromeOS with SOL image. CPU log: [SPEW ] bootmode is set to: 0 (boot with full config) [0.384818] DP PHY mode status not complete [0.388911] DP PHY mode status not complete [0.393197] DP PHY mode status not complete [0.397484] DP PHY mode status not complete [0.401771] DP PHY mode status not complete [0.406057] DP PHY mode status not complete [0.410345] DP PHY mode status not complete [0.414632] DP PHY mode status not complete [0.418916] DP PHY mode status not complete [0.423203] DP PHY mode status not complete [0.427491] DP PHY mode status not complete [0.431777] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. [DEBUG] FMAP: area COREBOOT found @ 1877000 (7901184 bytes) [WARN ] CBFS: 'preram_locales' not found. [ERROR] ux_locales_get_text: preram_locales not found. [DEBUG] FMAP: area RW_ELOG found @ f20000 (16384 bytes) [INFO ] ELOG: NV offset 0xf20000 size 0x4000  elogtool list: 0 | 2024-05-10 02:26:07-0700 | Log area cleared | 4088 1 | 2024-05-10 02:26:07-0700 | Early Sign of Life | MRC Early SOL Screen Shown 2 | 2024-05-10 02:26:51-0700 | Memory Cache Update | Normal | Success 3 | 2024-05-10 02:27:09-0700 | System boot | 4 4 | 2024-05-10 02:27:09-0700 | Firmware Splash Screen | Enabled 5 | 2024-05-10 02:27:11-0700 | System Reset 6 | 2024-05-10 02:27:11-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown 7 | 2024-05-10 02:27:18-0700 | ACPI Enter | S5 8 | 2024-05-10 02:27:36-0700 | System boot | 5 9 | 2024-05-10 02:27:36-0700 | Firmware Splash Screen | Enabled 10 | 2024-05-10 02:27:37-0700 | System Reset 11 | 2024-05-10 02:27:37-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown Change-Id: I1d4795825960bc58f8f7ef494b01aa975f3bc346 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
2024-05-28mb/google/trulo: Add initial devicetree.cbSubrata Banik
This patch adds initial PCI device entries into the baseboard devicetree.cb. TEST=Able to build google/trulo. Change-Id: I6ec25b98379cf7c8cbdb5be94d9f3ea43878620c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Mark unused USB ports as emptySubrata Banik
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Trulo variants to override the USB ports as per the target board design. TEST=Able to build google/trulo. Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Program EC ranges (host cmd and memory map)Subrata Banik
This patch adds chip config entries for EC host cmd and memory map ranges. TEST=Able to build Google/Trulo. Change-Id: Id4b0f3bba934c8da56b6d7ca8579b46b6cccac28 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-27mb/google/ovis/var/deku: Set PsysPL2 value to 178WTony Huang
Adjust setting as recommended by power team. Add ramstage.c in Makefile.inc to set psys_pl2_watts in variant_devtree_update(). Also copy CPU power limit values from ovis baseboard. BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=FSP debug emerge-ovis coreboot intelfsp check overrides setting [INFO] CPU PsysPL2 = 178 Watts [INFO] Overriding PsysPL2 (178) [INFO] Overriding power limits PL1 (mW) (19000,28000) PL2 (mW) (64000, 64000) PL4 (W) (120) Change-Id: I9ce3a8f843a87e81d404778aaf250b876b6801eb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-27mb/google/ovis/var/deku: Increase TDP PL1 value from 28 W to 33 WTony Huang
Adjust settings as recommended by thermal team. Set PL1 max value tdp_pl1_override from 28W to 33W. PL2, PL4 remain the same as CPU default. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: Iad0bca913496dda666ba9bcfe5f6fce1a6396692 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82615 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/google/ovis/var/deku: Set TCC_offset to 5Tony Huang
Adjust settings as recommended by thermal team. Set tcc_offset value to 5 in devicetree. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I30f54ae6017c54c91ff9b432bba0ebd5bfc65ab9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82614 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-27mb/google/rex/var/deku: Update DPTF parametersTony Huang
Adjust settings as recommended by thermal team. Update DPTF parameters based on b:308704811#comment4. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I710682771bd0679ae4b44dd43be68f60e8984b2e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-24mb/google/trulo: Refactor gpio pad configurationSubrata Banik
This patch tries to simplify the baseboard/variant GPIO programming for Google/Trulo. The idea is to let each variant maintain its own complete GPIO PAD configuration table instead of having a back-and-forth call between baseboard and variants. With this patch coreboot performing GPIO programming is now much simpler where the common code block calls into respective variants and gets the gpio table prior to the pad configuration. BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant) TEST=Able to build google/orisa. Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-24mb/google/nissa: Fix potential null pointer dereferenceSubrata Banik
* Introduce a null check before calling `gpio_padbased_override` in `variant_configure_pads`. * This prevents potential errors in cases where the `variant_gpio_override_table` function returns a null pointer, indicating that there are no override pads to configure. BUG=b:334826281 TEST=Able to avoid hang incase there is no GPIO override. Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/brox/var/brox: Remove mux references from typec portPrashant Malani
The Type-C kernel driver no longer programs the AP mux, as of https://review.coreboot.org/c/coreboot/+/82077. So remove device references to the TCSS Mux control device from the Type-C port driver. This eliminates the following kernel error which was observed as a result of the kernel trying to program muxes it no longer has control over: [ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95 [ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95 BUG=b:341331428 TEST=Run system reboot; configure mux kernel errors no longer seen. Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/brya: Add romstage early graphics for nissaRonak Kanabar
1) Add all changes needed for early graphics 2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa The InnoLux (N156HCN-EBA C7) panel is used for the device tree. BUG=b:296433986 TEST=On-screen text message seen during MRC training on Craask Logs: [NOTE ] MRC: no data in 'RW_MRC_CACHE' [SPEW ] bootmode is set to: 0 [0.171409] DP PHY mode status not complete [0.175509] DP PHY mode status not complete [0.179799] DP PHY mode status not complete [0.184087] DP PHY mode status not complete [0.188376] DP PHY mode status not complete [0.192665] DP PHY mode status not complete [0.196954] DP PHY mode status not complete [0.201243] DP PHY mode status not complete [0.205532] DP PHY mode status not complete [0.209821] DP PHY mode status not complete [0.214110] DP PHY mode status not complete [0.218397] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/nissa/var/orisa: Generate RAM ID for Micron MT62F512M32D2DR-031 WT:BAmanda Huang
Add Micron part MT62F512M32D2DR-031 WT:B only for Orisa. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) BUG=b:337178014 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I559ed817250c40795e6c613794d4f65c636f5fc5 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82586 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/rex/var/deku: Configure GPIO"Tony Huang
This reverts commit 7088257b1ab715e93506619727e3bf589ea688fb. Reason for revert: Intel suggest is NC only. No need to change anything that isn't broken. Change-Id: I976a85b35c69b03f1bc0ccd2bc7df923e47be815 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82572 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/brox: Update verb table to fix headset detection"Terry Cheong
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd. The new verb table breaks external mic detection on brox. Revert and use old verb tables instead. BUG=b:330433089 BRANCH=main TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brya/var/nova: Add SOLDERDOWN supportKenneth Chan
Nova will use SOLDERDOWN. Add memory.c to override baseboard. Update dram id table for correct platform parameter. BUG=b:328711879 Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brox/var/greenbayupoc: Update verb table from ALC256 to ALC236Wu Garen
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256) Update to Realtek provided verb table for ALC236 audio codec. BUG=b:336967284 TEST=Verified headset and audio workable on DUT with "rec" and "aplay" command. Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413 Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brya/var/bujia: Add devicetree based on schematicsShon Wang
Add devicetree settings per the schematic. Differences to gladios: 1. remove SD reader 2. remove EMMC setting 3. modify USB port distribution FRONT ------------------------------------------------------- | A3 A1 | | C0 A2 A0 | ------------------------------------------------------- BACK ------------------------------------------------------- | --------------- | | | TX25A | | ------------------------------------------------------- BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-17mb/google/dedede/var/kracko: Disable un-used C1 port by daughterboardRobert Chen
Probe C1 port in devicetree and disable un-used C1/A1 port by FW_CONFG. BUG=b:339534479 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot chromeos-bootimage flash and check boot log on DUT. Change-Id: I944ff6f2fa712e7579ed1c9879f75835adc3ac4c Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-05-17mb/google/brask/var/nova: Remove unused retimerKenneth Chan
Remove unused setting for retimer. BUG=b:328711879 Change-Id: I48d8680d43a07aa3408dfbf5b25b568c2b51b343 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82475 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-16mb/google/rex: Remove redundant VPU enablement codeSubrata Banik
This patch removes VPU enablement code that is no longer needed because the VPU is already enabled by default in the baseboard devicetree. BUG=b:332488817 TEST=Able to see VPU PCI device in lspci list after booting google/screebo to OS Change-Id: I94de92e970be1548068ed4e19309a95129f041ff Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82423 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-16mb/google/rex: Enable VPU device for Rex/Ovis baseboardSubrata Banik
This patch enables the Versatile Processing Unit (VPU) by default for Rex/Ovis baseboard. VPU is a dedicated AI engine that is included in the 14th generation "Meteor Lake" Core processors. The VPU is designed to efficiently run AI models directly on the system on chip (SoC). There is no power regression observed while keeping the VPU default enabled to run AI models natively hence, this patch enables the VPU by default. BUG=b:332488817 TEST=Able to see VPU PCI device in lspci (0:11:0) list after booting google/screebo to OS. Change-Id: I8b3521c8ec613b002f971eaf9d346927fe8cd656 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-16mb/google/rex/var/baseboard/ovis: Support CPU power limits per variantTony Huang
There is no direct way to override CPU default power_limits for different SKUs. This CL add structure variant_get_soc_power_limit_config() for variants to define and configure the values of soc_power_limits_config for current CPU SKU. Variants can override these values i.e. pl1, pl2, psyspl2 in variant_devtree_update(). BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=FSP debug emerge-ovis coreboot intelfsp check overrides setting Change-Id: Ib60fa4e3fc502d0aeb0c94ad46ba5a55b4dd027c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82199 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-16mb/google/brask/var/bujia: Update gpio tableShon Wang
Based on latest schematic to update the gpio table. BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I3d01e3b9eaef72d9e143f5163ee49d8c8f455b5f Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82412 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-15mb/google/brya: Create orisa variantEricKY Cheng
Create the orisa variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:337178014 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ORISA Change-Id: I0cd8d763ffd8864b455a7f8909e95f6aee8bb23e Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-14mb/google/nissa/var/glassway: Set VccIn Aux Imon IccMax to 25 AFrank Chu
Iccmax of VccIn_Aux is 25A with MBVR design. BUG=b:330117043 BRANCH=firmware-nissa-15217.B TEST=Local build successfully and boot to OOBE normally. Change-Id: I105dc9df53c624fd7fc697408a1097e023a3cd68 Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81445 Reviewed-by: Simon Yang <simon1.yang@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/nissa/var/quandiso: Add stop pin for G2 touchscreenRobert Chen
Add stop pin control for G2 touchscreen refer to G7500_Datasheet_Ver.1.2. BUG=b:335803573 TEST=build and verified touchscreen works normally Change-Id: I4f085c67c0cdb8b9ca3ff03993fda69cca6319ef Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82254 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/brox/var/greenbayupoc: Add vbt from broxEren Peng
Copy the data.vbt from brox to greenbayupoc BUG=b:326413034 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT Change-Id: I1e8101519ab2ecbb4654c20485fbe83c90656e4d Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82108 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/brox/var/greenbayupoc: Update devicetree and gpio settingsEren Peng
Based on latest schematics GREENBAY_0412.SCH update the gpio and devicetree settings. BUG=b:326413034 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT Cq-Depend:chrome-internal:7218819 Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455 Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-14mb/google/nissa/var/sundance: Update HID offset to 0x01 for Focal touchpadLeo Chou
Currently the Focal touchpad does not work. Based on the Focal touchpad vendor, upadet the HID descriptor address from 0x20 to 0x01. BUG=b:339756281 TEST=Build and check Focal touchpad can work. Change-Id: I383ad907e6a23c34ab1bd0f6594a87564e21181d Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-14mb/google/dedede/var/pirika: Add SPD IDs for two new memory partsDaniel_Peng
Support Memory of Micron MT53E512M32D1NP-046 WT:B and Hynix H54G46CYRBX267 in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign MT53E512M32D1NP-046 WT:B 0 (0000) H54G46CYRBX267 0 (0000) BUG=b:337173071 BRANCH=firmware-dedede-13606.B TEST=Run command "go run \ ./util/spd_tools/src/part_id_gen/part_id_gen.go \ JSL lp4x src/mainboard/google/dedede/variants/pirika/memory/ \ src/mainboard/google/dedede/variants/pirika/memory/\ mem_parts_used.txt" Change-Id: I9b1a2a622d0ca1298671b1da58beacc1b4244769 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82094 Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-13mb/google/rambi: Use <device/dram/ddr3.h>Elyes Haouas
Change-Id: I3aa669042908b92d7b270df077a352e197071780 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82354 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-13mb/google/{eve,glados}: Use <spd.h> and <dram/ddr3.h>Elyes Haouas
Change-Id: I48b833a3727d4b7d7c50371dbe8f090983d80e36 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-13mb/google/brya/var/riven: Copy VBT data file from nivviksDavid Wu
Add data.vbt file for riven recovery image. Select INTEL_GMA_HAVE_VBT for riven as it has a VBT file now. The VBT file is copied from the nivviks reference board. BUG=b:337169542 TEST=build pass Change-Id: I499c1b3e61581483a1640375270f7707ebe8deeb Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82269 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-13mb/google/brox: Disable c1 state auto-demotionAshish Kumar Mishra
Disable c1 state auto-demotion support for brox BUG=None BRANCH=None TEST=Boot brox and verify in fsp debug logs Change-Id: I18d40cd721d46fce4702cf1a943583cd41c03cf4 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82104 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-12mb/google/rex/var/deku: Correct FVM Itrip for GT VR domainTony Huang
Previous CL misspelling VR domain to IA not GT which cause FVM Itrip(GT) not set correctly. This CL corrects it to VR_DOMIAN_GT and confirm FVM Itrip(GT) has set to 54. BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST= FSP debug emerge-ovis coreboot intel-mtlfsp check overrides setting IccLimit[1] = 216 ( 1/4 A) Change-Id: I99df053869aa11b7c82aa0b7f7ec0acf73467a76 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-12mb/google/brox/var/greenbayupoc: Configure board for SODIMM useEren Peng
Configure SODIMM settings for greenbayupoc. The SODIMM settings are copied from mainboard/google/brya/variants/baseboard/brask/memory.c. BUG=b:336955026, b:332230842 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot to OS using Hynix HMAG56EXNSA051N 4G and Micron MTA8AFT1G64HZ-3G2R1 8G SODIMM. Change-Id: I1552cadfa81c48fe561947ded078bcca2e6bc6ad Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82085 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-12mb/google/brya/var/riven: Generate SPD ID for supported partsDavid Wu
Add supported memory parts in mem_parts_used.txt, and generate SPD id for these parts. 1. MT62F1G32D4DR-031 WT:B (Mircon) 2. MT62F512M32D2DR-031 WT:B (Mircon) 3. H9JCNNNBK3MLYR-N6E (Hynix) 4. K3LKLKL0EM-MGCN (Samsung) 5. K3LKBKB0BM-MGCP (Samsung) 6. H9JCNNNCP3MLYR-N6E (Hynix) BUG=b:337169542 TEST=build pass Change-Id: I0ff3b1e14fb8bb87d8fc9cbe0e177a5bcedef08c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82255 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-09mb/google/brox: Sending End of Post (EOP) asynchronouslyKarthikeyan Ramasubramanian
Currently EOP message is sent to CSE late in the boot flow. Instead send it asynchronously to save ~10 ms in boot time. BUG=b:337330958 TEST=Build Brox BIOS Image and boot to OS. Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-08mb/google/brox: Fix the pad reset config for WLAN Wake interruptKarthikeyan Ramasubramanian
Update the pad reset config for WLAN Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S0ix & S3 and wakeup successfully using Wake on WLAN. 268 | 2024-05-07 13:56:44-0700 | S0ix Enter 269 | 2024-05-07 13:57:07-0700 | S0ix Exit 270 | 2024-05-07 13:57:07-0700 | Wake Source | GPE # | 3 271 | 2024-05-07 13:59:01-0700 | ACPI Enter | S3 273 | 2024-05-07 13:59:26-0700 | Wake Source | PME - WIFI | 0 274 | 2024-05-07 13:59:26-0700 | ACPI Wake | S3 275 | 2024-05-07 13:59:26-0700 | Wake Source | GPE # | 3 Change-Id: Ie0d6e6c8fefdd081e252ea99d6e3c559a5330b0e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82234 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-08mb/google/brox/var/brox: increase PsysPmax from 21.5W to 208WLawrence Chang
According to Brox HW design, the PsysPmax is supposed to be 208W. This patch changes PsysPmax setting from 21.5W to 208W. Change-Id: I43f4b00a54dc0dfe6bd690492f9ef92698c9b903 Signed-off-by: Lawrence Chang <lawrence.chang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-05-08mb/google/parrot: Fix smbus subsystem IDMatt DeVillier
The smbus subsystem ID was inadvertently reversed when added in commit 6974bcd28e74 ("mb/google/parrot: override SMBus subsystem ID"), so correct it. TEST=build/boot Win10 on parrot, verify touchpad driver functional. Change-Id: I93d4812e24a6fc7419887e364974fcfae2465ea3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-08mb/google/butterfly: Fix smbus subsystem IDMatt DeVillier
The smbus subsystem ID was inadvertently reversed when added in commit a6076cfcfdbe ("mb/google/butterfly: override SMBus subsystem ID"), so correct it. TEST=build/boot Win10 on butterfly, verify touchpad driver functional. Change-Id: If4a0eae06bbe4dcba893a42797e371bbf9f899b9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82225 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-07mb/google/corsola: Add new board variant SquirtleYang Wu
Add a new Kingler follower 'Squirtle'. BRANCH=corsola BUG=b:333826091 TEST=emerge-corsola coreboot Change-Id: I393738fc470ffc907f125647a46bf81c243708d7 Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-06mb/google/brya/var/bujia: Add VBT data fileShon Wang
Add data.vbt files for bujia supported by brask recovery images. Select INTEL_GMA_HAVE_VBT for bujia which currently have a VBT file. changes: 1. "integrated DisplayPort with HDMI/DVI compatible" -> "Integrated HDMI/DVI". 2. turn the AUX off. BUG=b:327549688 TEST=build/boot various brya variants Change-Id: Id56461708250eaedd288ddbf788d686153df0b96 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81553 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/brox:Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATIONKrishna Prasad Bhat
Brox uses PDC<->PMC direct connection for USBC mux configuration. Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it. This patch also adds additional dependency on ENABLE_TCSS_USB_DETECTION to be selected only when PDC<->PMC direct connection and CHROMEOS is not used. BUG=b:332383540 TEST=USB3 plugged during G3, is detected after system boots from G3. Cq-Depend: chromium:5484387 Cq-Depend: chrome-internal:7106592 Change-Id: I0f62943f87d8fb6eb494c0aca3ef08c33cd05ffd Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-05-06mb/google/brya: Correct _PLD valuesWon Chung
For Mithrax and Felwinter, port C1 is on the left side and port C2 is on the right side. Correct the values accordingly. The board schematics was mirrored, so had to obtain an actual machine and physically check the correct ports. BUG=b:321051330 TEST=emerge-${BOARD} coreboot then check ACPI table on DUT Change-Id: I977c3b4081987592a1d46529eb848a07a6c4cb47 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81363 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Emilie Roberts <hadrosaur@google.com>
2024-05-06mb/google/brya: Fix mux_conn index used by ec/google/chromeecWon Chung
Within ec_acpi.c, USB-C ports are iterated to be matched with corresponding mux. The iteration happens from 0 to the number of USB-C ports. Given iteration index i, the port with PLD group_token of (i+1) is matched with mux_conn[i]. Mithrax and Felwinter devicetree matches conn1 to mux_conn[1] and conn2 to mux_conn[0]. However, conn1 is for usbX_port2 which has group_token of 1 and conn2 is for usbX_port3 which has group_token of 2. Thus, follow the convention to add conn1 to mux_conn[0] and conn2 to mux_conn[1]. Otherwise, the kernel subsystem linking between Type C connector and USB mux will be swapped. BUG=b:329657774 b:121287022 b:321051330 b:204230406 TEST=emerge-${BOARD} coreboot then check ACPI table on DUT. TEST=Manually check that usb-role-switches are mapped to the correct port. Attach USB 3 A to C cable from development machine to left port of DUT. Attach nothing to right-hand port. usbpd lines are workaround for devices without firmware patch to connect superspeed lines. ectool usbpd 0 none ectool usbpd 0 usb ectool usbpd 1 none ectool usbpd 1 usb echo host > /sys/class/typec/port0/usb-role-switch/role (should succeed) echo host > /sys/class/typec/port1/usb-role-switch/role (should fail as no cable attached) Change-Id: I349682a6fe3fe4848e4e86d9c446530a31b35875 Signed-off-by: Won Chung <wonchung@google.com>, Emilie Roberts <hadrosaur@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81354 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Emilie Roberts <hadrosaur@google.com>
2024-05-06mb/google/nissa/var/sundance: Use default eMMC DLL settingLeo Chou
Configure eMMC DLL tuning values for Sundance board Samsung sku. BUG=b:337741162 TEST=Use the value to boot on Sundance successfully. Change-Id: I5f1e03c06c9f8567e757fed999730dff2551f1e0 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82173 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/sarien: Make use of chipset dt reference namesFelix Singer
Replace the PCI numbers with the reference names from the chipset devicetree. Also, remove their comments since they are superfluous now. Change-Id: I49f5fda5628b2ebc76cd8db20c8f7fe85c676c7a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-05-06mb/google/sarien: Remove dt entries equal to chipset dtFelix Singer
Clean up the devicetree by removing entries which are equal to the chipset devicetree. The P2SB device is enabled but it's hidden by the FSP. So just remove that as well since the chipset devicetree configures it correctly. Change-Id: I38f46949d36359826317252e8d3434ad1b24382d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82156 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/drallion: Make use of chipset dt reference namesFelix Singer
Replace the PCI numbers with the reference names from the chipset devicetree. Also, remove their comments since they are superfluous now. Change-Id: Ib873854954e44b3ea370c2574da5db9792a446e9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82155 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/drallion: Remove dt entries equal to chipset dtFelix Singer
Clean up the devicetree by removing entries which are equal to the chipset devicetree. The P2SB device is enabled but it's hidden by the FSP. So just remove that as well since the chipset devicetree configures it correctly. Change-Id: I6186d295427bcd4a3b696f4df59d94a148ced011 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-05-06mb/google/brya/var/pujjoga: Add GPIO tableleo.chou
Fill GPIO table for pujjoga. BUG=b:336469694 TEST=emerge-nissa coreboot Change-Id: I3f633cf99f56d5f855015de805e16c1205c9bc99 Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82044 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-06mb/google/brya/var/xol: Override TDP PL1 valueSeunghwan Kim
Update TDP PL1 value for the DTT optimization. The new value 18W is from internal thermal/performance team. - tdp_pl1_override: 15 -> 18 (W) BUG=b:336684032 BRANCH=brya TEST=built and verified MSR PL1 value. Intel doc #614179 introduces how to check current PL values. [Original MSR PL1/PL2/PL4 register values for xol] cd /sys/class/powercap/intel-rapl/intel-rapl\:0/ grep . *power_limit* constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W) constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W) constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W) After this patch: constraint_0_power_limit_uw:18000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:114000000 Change-Id: I28c4f099e0169e8389f63083c03023dd8338589f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82151 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/brya/var/xol: Tune I2C5 timing parametersSeunghwan Kim
Update I2C5 timing parameter values to meet I2C bus spec. - fall_time_ns: 400 -> 200 BUG=None BRANCH=brya TEST=built and measure I2C5 timing parameters Before: tLOW : 1.88 us (spec >= 1.30) tHIGH: 0.57 us (spec >= 0.60) fSCL : 399.80 KHz After: tLOW : 1.60 us (spec >= 1.30) tHIGH: 0.97 us (spec >= 0.60) fSCL : 392.1 KHz Change-Id: I386b2765410fd10b8cd711f54478fb52428de5a3 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-06mb/google/nissa: Create a riven variantDavid Wu
Create the riven variant of nissa reference board by copying the template files to a new directory named for the variant. The riven variant is a twinlake platform. BUG=b:337169542 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_RIVEN Change-Id: I1be2346d87c891cc0e5fbda094e1f6e0dd60df1b Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82132 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/corsola: Sort Kconfig board selection in alphabet orderYidi Lin
Change-Id: Iefe61d3ad51d355806716483248df5b1083b69bc Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82149 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/nissa/var/pujjoga: Generate SPD IDsroger2.wang
Add pujjoga supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT 2. Hynix H9JCNNNBK3MLYR-N6E, H58G56BK7BX068 3. Micron MT62F1G32D2DS-026 WT:B BUG=b:337990338 TEST=Use part_id_gen to generate related settings Change-Id: I39d44fd278474a7375ad1d2d904d14b9463ba86d Signed-off-by: roger2.wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82135 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-06mb/google/nissa/variant/pujjoga: Update devicetree settingsroger2.wang
Based on schematic of 500E_GEN4S_ADL_N_MB_0418, generate overridetree.cb settings for Pujjoga. BUG=b:337611700 TEST=FW_NAME= pujjoga emerge-nissa coreboot chromeos-bootimage Change-Id: I279f94044a22f25100a44b1abe2ef5fb6d0dd835 Signed-off-by: roger2.wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82109 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-06mb/google/rex/var/deku: Update psys_pmax_watt value to 180WTony Huang
Adjust setting is from power team. Change from 172W to 180W BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST= FSP debug emerge-ovis coreboot intel-mtlfsp check overrides setting Change-Id: Icc8b12adc9fb9f680b05131c8d41212865223ca9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-05-06mb/google/rex/var/deku: Update FVM itrip for VR domainTony Huang
Adjust setting is from power team. Itrip(GT) FVM 54 Itrip(SA) FVM 27 BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST= FSP debug emerge-ovis coreboot intel-mtlfsp check overrides setting Change-Id: I6d6cf7cecaac650a7b1784833b4afb8dffb3db2c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82176 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-03mb/google/brya/var/xol: Update board type to BOARD_TYPE_ULT_ULXSeunghwan Kim
Correct .UserBd field to BOARD_TYPE_ULT_ULX from BOARD_TYPE_MOBILE. This is from Intel's guidance for MRC to map the memory speed to proper POR number. BUG=b:332980211 BRANCH=brya TEST=Built and compare the results of command 'dmidecode -t 17' [Before] (Same values in all of memory device handle) Speed: 6400 MT/s Configured Memory Speed: 6400 MT/s [After] (Same values in all of memory device handle) Speed: 5200 MT/s Configured Memory Speed: 5200 MT/s Change-Id: Id16bcbc2d0cb4c2cf3008cf2ef1027ed98e93afb Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-03mb/google/corsola: Initialize USB port 0Wentao Qin
The default MT8186 platform is to initialize USB3 port 1. Use option bit 27 in fw_config to enable initialization of USB2 port 0 to support devices mounted on it. BUG=b:335124437 TEST=boot to OS from USB-A boot to OS from SD Card BRANCH=corsola Change-Id: I725b80593f5fc498a204bf47f943c36ccbd78134 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82089 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-30soc/intel/alderlake: Default to 512 for DIMM_SPD_SIZEFelix Singer
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total SPD size of 512 bytes. Set this as the default and remove the setting from mainboard Kconfigs. Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30mb/google/brya/var/xol: Add EC_IN_RW_OD config into early_gpio_tableSeunghwan Kim
Add GPP_F18 configuration in early_gpio_table. Without this, DUT cannot get the proper state of this signal on early phase. It allowed DUT to attempt to enter into dev mode when EC is in RW currently, it causes the failure of autotest/firmware_DevMode. BUG=b:337365524 TEST=built and run autotest firmware_DevMode Change-Id: I2179bb10b431547bc35f332c74915a63495b779d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82099 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: YH Lin <yueherngl@google.com>
2024-04-30mb/google/brox: Add 20K pulldown to GPP_D14Shelley Chen
GPP_D14 is floating when ISH is not being used and wasting power. Add pulldown to prevent this from happening. BUG=b:336654954 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage make sure OS boots up HW team validated that power usage is 20 mW lower Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-29mb/google/brox: Fix the pad reset config for Touchpad interruptKarthikeyan Ramasubramanian
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup using Trackpad. 246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3 247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3 248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67 249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3 250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3 251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67 Also suspend to S0ix and wakeup using Trackpad. Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-29mb/google/brya/xol: Add Fn key scancodeAseda Aboagye
The Fn key on Xol emits a scancode of 94 (0x5e). BUG=b:327656989 TEST=Flash xol, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I34ed93d9666504bfd4d439e166911e49f58e5ff5 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82069 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-26mb/google/rex: remove duplicate config for karisYH Lin
Remove duplicate config entry CHROMEOS_WIFI_SAR as it is used at the baseboard. BUG=None TEST=emerge-rex coreboot Change-Id: Iabf0e490103c2097f3f033036839b77b5a0bb1b3 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81226 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-25mb/google/brox/var/lotso: Add fw_config field for storagetongjian
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333494257 TEST=emerge-brox coreboot depthcharge sys-boot/chromeos-bootimage Change-Id: Idb62e3f37e1480979ae529692455beb533434520 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82056 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/nissa/var/glassway: Enable Wi-Fi sar table for Intel moduleDaniel_Peng
1.Enable CHROMEOS_WIFI_SAR flag to load a SAR table for Intel module. 2.Describe the FW_CONFIG probe for the settings on glassway. - WIFI_SAR_0 for Intel Wi-Fi module AX211 BUG=336051631 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I9e43081c93ef17291c5d55cf262a0f4d1497447b Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81781 Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/brya/var/nova: Add initial configurationsKenneth Chan
Upload initial configuration for nova based on proto schematics. Memory: SAMSUNG 2G*4 K4U6E3S4AB-MGCL HYNIX 2G*4 H9HCNNNBKMMLXR-NEE BUG=b:328711879 TEST=FW_NAME=nova emerge-constitution coreboot chromeos-bootimage Change-Id: Ic9ff3ed2fb3a7f0f100385d0a0444d38fcff5c51 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-04-25mb/google/nissa/var/yaviks: Add stop pin for G2 touchscreenWisley Chen
Add stop pin control for G2 touchscreen BUG=b:335803573 TEST=build and verified Touchscreen work normally Change-Id: I7e0bbc7722cdda6bcca0485009fcf8510b1f55e2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81971 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/corsola/var/wugtrio: Add STA_ER88577 MIPI panelYang Wu
Add STA_ER88577 MIPI panel for Wugtrio. Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf BUG=b:331870701 TEST=emerge-staryu coreboot chromeos-bootimage BRANCH=corsola Change-Id: I279d431d80ca0770540d88e213d4aeafe77038ce Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82055 Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-24mb/google/nissa/var/anraggar: Add cbj_sleeve to control mic jackJianeng Ceng
Add a new GPIO port cbj-sleeve for kernel driver to call. At the same time, a new rt5645 driver is added to replace the generic driver to parse gpio. After entering the system, it is pulled high by the kernel to enable the MIC function. BUG=None TEST=MIC function is normal Change-Id: I093be6a3e357aae389fcbe8291a9701c40b62e15 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81774 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-23mb/google/rex/var/deku: Update USB _PLD valuesTony Huang
Fix custom_pld for USB2-C2 and USB3-C3 with same PLD group. Update USB2-A4 PLD group token. USB2/USB3 Type-C Port C2 "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(3, 1))" USB2/USB3 Type-C Port C3 "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(4, 1))" BUG=b:320203629 BRANCH=firmware-rex-15709.B TEST= emerge-ovis coreboot Change-Id: Ieecf0f7dda671a421e4e4a4adbf83240fadd018d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-23mb/google/rex/var/deku: Configure GPIOTony Huang
Set unused pin to NC internal PU 20K BUG=b:325674908 BRANCH=firmware-rex-15709.B TEST= emerge-ovis coreboot Change-Id: I78eddaa41c14721eeb6ff33a4cb15382853e430b Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-22mb/google/nissa/var/craaskov: modify 6W and 15W DPTF parametersIan Feng
The DPTF parameters were defined by the thermal team. Based on thermal table in 330817690#comment33. Set 6w "tcc_offset" to "15" by fw_config. BUG=b:330817690, b:290705146 BRUNCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I19100d960919dc3087fd067c24659de467eea276 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81997 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 09:43:31 +0000