summaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork
AgeCommit message (Expand)Author
2020-11-17mb/google/zork: Assume VBOOT_STARTS_BEFORE_BOOTBLOCKMartin Roth
2020-11-16mb/google/zork/: Enable REGULATORY_DOMAIN on VilbozEric Lai
2020-11-16mb/google/zork: Init fingerprint GPIOs for boot vs resumeMartin Roth
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-10mb/google/zork: Create Shuboz variantKane Chen
2020-11-06zork/var/ezkinil: Adjust USB2 phy si fine tune on DVT BoardLucas Chen
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
2020-11-05soc/amd/picasso: move MAX_CPUS setting from mainboard to SoC KconfigFelix Held
2020-11-04soc/amd: Change FIRMWARE_LOCATE to FIRMWARE_LOCATIONZheng Bao
2020-11-02mb/google/zork/var/vilboz: Update touch screen power sequenceEric Lai
2020-10-30fw_config: Convert fw_config to a 64-bit fieldTim Wawrzynczak
2020-10-28mb/google/zork: Revert temp acpi backlight fixJosie Nordrum
2020-10-28mb/google/zork: Generate acpi methods in mainboard.cJosie Nordrum
2020-10-26mb/google/zork/vilboz: Enable SAR proximity sensor STH9324Frank Wu
2020-10-26mb/google/zork: Update style of check on cbi return valuesEric Lai
2020-10-24mb/google/zork: update USB 2.0 controller Lane Parameter for berknipKevin Chiu
2020-10-23mb/google/zork: update telemetry settings for morphiusKevin Chiu
2020-10-23mb/google/zork/woomax: Adjust disconnect thresholdRob Barnes
2020-10-21mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
2020-10-21mb/google/zork: Update telemetry settings for morphiusKevin Chiu
2020-10-19Revert "mb/google/zork/dalboz: Increase eMMC initial clock frequency"Rob Barnes
2020-10-19mb/google/zork/var/vilboz: update dptc stapm timeJohn Su
2020-10-16mb/google/zork: disable eMMC per FW_CONFIG for berknipKevin Chiu
2020-10-14mb/google/zork: Enable wake on wireless lanRob Barnes
2020-10-13mb/*/*/dsdt.asl: Drop useless comments in DefinitionBlock()Elyes HAOUAS
2020-10-13mainboard/*/*/dsdt.asl: Make DefinitionBlock's AMLFileName uniformElyes HAOUAS
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
2020-10-13mb/google/zork: Convert to ASL 2.0 syntaxElyes HAOUAS
2020-10-12mb/google/zork/dirinboz: Increase eMMC initial clock frequencyRob Barnes
2020-10-12mb/google/zork/dalboz: Increase eMMC initial clock frequencyRob Barnes
2020-10-12mb/google/zork/woomax: Increase eMMC initial clock frequencyRob Barnes
2020-10-12mb/google/zork/vilboz: Increase eMMC initial clock frequencyRob Barnes
2020-10-08mb/google/zork/berknip: Increase eMMC initial clock frequencyRob Barnes
2020-10-08zork/var/ezkinil: Add micron-MT40A1G16KD-062E-E in SPD table for Ezkinil.Lucas Chen
2020-10-08mb/google/zork/ezkinil: Increase eMMC initial clock frequencyRaul E Rangel
2020-10-08mb/google/zork/morphius: Increase eMMC initial clock frequencyRob Barnes
2020-10-08soc/amd/picasso: Remove xhci0_force_gen1 from soc configChris Wang
2020-10-08mb/google/zork: Set USB3 port to force gen1 for morphius and ezkinilChris Wang
2020-10-07mb/google/zork: Add EC device wakeup for morphiusJosie Nordrum
2020-10-06zork/var/ezkinil: Adjust Touchscreen suspend off timingLucas Chen
2020-10-01mb/google/zork: Configure EMMC_RESET_L to drive highKevin Chiu
2020-10-01mb/google/zork: Initialize the backlight in the OSMartin Roth
2020-10-01mb/google/zork: Remove code that reconfigured the backlight GPIOMartin Roth
2020-09-28mb/google/zork: Set eMMC presetsRaul E Rangel
2020-09-28mb/google/zork: update telemetry settings for berknipKevin Chiu
2020-09-28mb/google/vilboz: update telemetry settingsChris Wang
2020-09-28mb/google/zork: update telemetry settings for dirinbozKevin Chiu
2020-09-28mb/google/zork/vilboz: Add new memory part H5ANAG6NDMR-XNCAmanda Huang
2020-09-28mb/google/zork/vilboz: Remove unused memory part IDsAmanda Huang
2020-09-28util: Add new memory part for zork boardsAmanda Huang
2020-09-28mb/google/zork: disable eMMC per FW_CONFIG for MorphiusKevin Chiu
2020-09-25mb/google/zork: Modify I2C3 CLK for Woomax to meet I2C specificationKane Chen
2020-09-25mb/google/zork: Modify USB 2.0 PHY parameters for WoomaxKane Chen
2020-09-23mb/google/zork: simplify flashmap fileFelix Held
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
2020-09-20mb/google/zork: update morphius dptc clamshell/tablet mode settingKevin Chiu
2020-09-17mb/google/zork: Add dptc interface support for morphiusChris Wang
2020-09-16zork/var/ezkinil: Fix Touchscreen doesn't work on v3.6x rework boardLucas Chen
2020-09-15mb/google/zork: Fix FPMCU_INT_L configurationFurquan Shaikh
2020-09-14soc/amd/picasso: Move sd_emmc_config into emmc_config structRaul E Rangel
2020-09-13soc/amd/picasso/chip: fix typo in acp_pme_enableFelix Held
2020-09-11mb/google/zork: Add woomax memory ID 0Rob Barnes
2020-09-10soc/amd/picasso: Move APCB generation out of picassoRob Barnes
2020-09-09util/spd_tools: Support comments in mem_parts_usedRob Barnes
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
2020-09-03mb/google/zork: update DRAM table for berknipKevin Chiu
2020-08-31mb/google/zork: Fix SPD typo in trembyle makefileRob Barnes
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
2020-08-31mb/google/zork/dalboz: move PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork/trembyle: add PCIe GPP clock setting to devicetreeFelix Held
2020-08-31mb/google/zork: update GPIO config for dirinbozKevin Chiu
2020-08-31mb/google/zork: update GPIO config for berknipKevin Chiu
2020-08-28mb/google/zork: Modify USI_RESET_L GPIO 140 to be active to lowKane Chen
2020-08-28mb/google/zork: Disable SATA device for all Zork platforms to save powerMatt Papageorge
2020-08-28mb/google/zork/woomax: Remove unused memory partsRob Barnes
2020-08-28mb/google/zork/berknip: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork/dirinboz: Remove unused memory part IDsRob Barnes
2020-08-28mb/google/zork: Switch zork to use spd_toolsRob Barnes
2020-08-28util: Add memory parts needed by zork boardsRob Barnes
2020-08-26mb/google/zork: meet SAR depedenciesAaron Durbin
2020-08-26mb/google/zork: add TS/TP support for dirinbozKevin Chiu
2020-08-26Reland "mb/google/zork: Revert Don't expose reset GPIO for touchscreen to OS"Furquan Shaikh
2020-08-24mb/google/zork: update telemetry settings for woomaxChris Wang
2020-08-24mb/google/zork: Fix GPIO table for v3.6 schematics for woomaxKane Chen
2020-08-24mb/google/zork: Enable WiFi SAR configsKevin Chiu
2020-08-24mb/google/zork: Add GPIO_144 in touchscreen power on/off sequenceKane Chen
2020-08-24mb/google/zork: Fix VARIANT_MIN_BOARD_ID_V3_6_SCHEMATICS for WoomaxKane Chen
2020-08-23mb/google/zork: disable non-GPU HD Audio deviceFelix Held
2020-08-21mb/google/zork/var/ezkinil: Fix stylus GPIO to enable suspendJosie Nordrum
2020-08-21mb/google/zork: provide full range backlight settings to kernelAaron Durbin
2020-08-19mb/google/zork/baseboard: Remove unused referenceMatt Papageorge
2020-08-19mb/google/zork: remove unused asl files for dirinbozKevin Chiu
2020-08-19mb/google/zork: Adjust Dirinboz I2C valuesKevin Chiu
2020-08-18mb/google/zork: Clean up bt reset_gpio removalRob Barnes
2020-08-17mb/google/zork: Switch to normal read mode for EM100Furquan Shaikh
2020-08-17mb/google/zork: adjust i2c2 data hold time for TPKevin Chiu
2020-08-15mb: remove unnecessary FADT flag devicetree entries for PicassoFelix Held
2020-08-13mb/google/zork: Switch to using FW_CONFIG instead of SKU_IDBhanu Prakash Maiya
2020-08-13mb/google/zork: Use FW_CONFIG to enable/disable eMMC on EzkinilBhanu Prakash Maiya