aboutsummaryrefslogtreecommitdiff
path: root/src/mainboard/google/zork/variants/dirinboz/overridetree.cb
AgeCommit message (Collapse)Author
2021-01-25mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
From AMD USB phy specialist recommended that for DB port2 (type-A), port3 (type-C C1) the most effective corrections for the depressed eye are: tx_rise_tune=0x0 tx_pre_emp_amp_tune=0x3 tx_fsls_tune = 0x3 BUG=b:165209698 BRANCH=zork TEST=1. emerge-zork coreboot 2. pass USB 2.0 SI eye diagram verification Change-Id: I80afd6bf1257b9a72d0d7651b48d243ebaf5de2f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-01-15mb/google/zork: update USB 2.0 controller Lane Parameter for dirinbozKevin Chiu
Enhance USB 2.0 M/B C0, DB C1 A1 port: HS DC Voltage Level(TXVREFTUNE0): 0xe COMPDISTUNE(COMPDISTUNE0): 0x7 BUG=b:165209698 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I371e4295c2ee161096f0a277c0c649bf217269b2 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47857 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-01-07mb/google/zork: Decrease stamp_boost parameter for dirinbozKevin Chiu
Original Stamp_boost parameter will cause boost time over 2500sec(3960sec) To pass balance performance and skin temperature test, decrease stamp_boost: 2500 -> 1640 BUG=b:175364713 TEST=1. emerge-zork coreboot 2. run balance performance and skin temperature test Change-Id: I44f086af6b5dd552efd2bd1ef4db0d69b652826d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-13mb/google/zork: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: I75a92616f11054993ff5a5bfefce5c3f4638c07c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
Use command below to change the variable globally. sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \ --exclude-dir=build --exclude-dir=crossgcc` BUG=b:171334623 TEST=Build Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-12mb/google/zork/dirinboz: Increase eMMC initial clock frequencyRob Barnes
This will reduce boot time by 7ms. Some of the initial designs don't have a pull-up resistor on the CMD line. These designs still boot at 400 kHz despite not having the pull-up. BUG=b:158766134 TEST=Boot dirinboz, run integrity test, b:169940185 BRANCH=zork Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: I6bac8284b67070ff2c5838257f4ae2ead0e69c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45934 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/zork: update telemetry settings for dirinbozKevin Chiu
update telemetry to improve the performance. BUG=b:168585079 BRANCH=zork TEST=emerge-zork coreboot Change-Id: I464b90550aaa1666ce3f2393856bf46fe7686d1d Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-07mb/google/zork: update TS power control for dirinbozKevin Chiu
3.6 schematic will separate TS power from eDP PP3300 to GPIO for power control and correct GPIO assignment from GPIO_90 to GPIO_32 instead. BUG=b:161579679 BRANCH=zork TEST=emerge-zork coreboot Change-Id: Ieef67e1d04201c5d9e1dc625c519e6d0307c55f0 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-08-31mb/google/zork: Fix active polarity of REPORT_EN pin in overridetreeFurquan Shaikh
GPIO_144 is REPORT_EN pin for the touchscreen controller where 1 means enable operation and 0 means stop operation. Override tree exposes this pin as stop GPIO. Thus, it needs to be configured as active low i.e. 0 = active (stop), 1 = inactive (enable report). Change-Id: I349123655260349b78d2f75f846da0ce1dc966fc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-31mb/google/zork: Fix active polarity of touchscreen reset GPIO in overridetreeFurquan Shaikh
v3.6+ of reference schematics have moved to using active low polarity for touchscreen GPIO. This change sets the default polarity in override tree accordingly to active low. To support boards from older builds, variant_touchscreen_update() already updates the polarity to active high. BUG=b:161937506 Change-Id: I370bdb27ea5d0601612d13b515113a6048018964 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-26mb/google/zork: add TS/TP support for dirinbozKevin Chiu
TS: ELAN 5015M G2 GTCH7503 HID TS TP: ELAN i2c-hid touchpad BUG=b:161579679 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully 3. TP/TS are functional Change-Id: I54aa16d433b6d71a39cca2ddd026a33e4741320f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-08-19mb/google/zork: Adjust Dirinboz I2C valuesKevin Chiu
BUG=b:164757545 BRANCH=master TEST=1. emerge-zork coreboot chromeos-bootimage 2. power on proto board successfully 3. measure i2c freq by scope is close to 400kHz Change-Id: Icb27ff8a4960caaebc542ee4e507f1611da5a77e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-23zork: Create dirinboz variantKevin Chiu
Create the dirinboz variant of the dalboz reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:161579679 BRANCH=master TEST=util/abuild/abuild -p none -t google/zork -x -a make sure the build includes GOOGLE_DIRINBOZ Change-Id: I33c03080ffbe0bca61acf4144417b9f5fff6389f Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-05 19:45:56 +0000