summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer
AgeCommit message (Collapse)Author
2020-11-20mb/google/volteer/variants: Enable RTD3 for the NVMe deviceDuncan Laurie
Enable Runtime D3 for the volteer variants that have GPIO power control of the NVMe device attached to PCIe Root Port 9. Enable the GPIO for power control for variants that do not already have it configured to allow the power to be disabled in D3 state. BUG=b:160996445 TEST=tested on delbin Change-Id: I6ebf813c6c3364fec2e489a9742f04452be92c45 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46262 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-20soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPDMichael Niewöhner
Replace the two obsolete LPID implementations with the new PEPD device. The PEPD device gets included in the plaforms' `southbridge.asl`, since it is required to load the `intel_pmc_core` module in Linux, which checks for the _HID. (See CB:46469 for more info on that.) There is no harm for mainboards not supporting S0ix, because the _DSM function won't be called with the LPS0 UUID on such boards. Such boards can use the debugging functionality of `intel_pmc_core`, too. Change-Id: Ic8427db33286451618b50ca429d41b604dbb08a5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46471 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19soc/intel/common/acpi: rename LPID to PEPDMichael Niewöhner
Rename LPID to PEPD for consistency. PEPD means "Power Engine Plug-In Device" and is the name Intel and vendors usually use, so let's comply. Change-Id: I1caa009a3946b1c55da8afbae058cafe98940c6d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46470 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-19mb/google/volteer/var/terrador: Correct enable_gpio to GPP_F16David Wu
The GPP_F16 is for enable_gpio after check the schematic. BUG=b:151978872 TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I63f43c231e624ed034ef18e8f06942ff3622d821 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-18mb/google/volteer: Add new Audio option to FW_CONFIGWisley Chen
Volteer has a new Audio option in FW_CONFIG. This patch adds support for it and when enabled, programs GPIO pins for I2S functionality. BUG=b:171174991 TEST=emerge-volteer coreboot Change-Id: I85bc37980957a3fb6c795858a4e4f44f3e3cc332 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-18mb/google/volteer: Update flashmap descriptor to add ME_RW_A/B regionJamie Ryu
The current CSE firmware update implementation adds CSE RW binary to FW_MAIN_A/B and this increases the boot time due to the size increase of these regions leading to higher loading and hashing time. To mitigate this issue, CSE RW binary is moved from FW_MAIN_A/B to new region, ME_RW_A/B under RW_SECTON_A/B, and this updates the flashmap to add ME_RW_A/B region for CSE RW binary. BUG=b:169077783 TEST=build with cse rw binary, flash and verify volteer2 boots to OS. Verify me_rw binary is added to ME_RW_A/B region. Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: I87da3824933ed2dd8e8ed0fed8686d2a3527faea Reviewed-on: https://review.coreboot.org/c/coreboot/+/46431 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-17mb/google/volteer/variants/volteer2: Tune Volteer2 I2C2 bus frequencyJohnny Li
The current I2C2 bus frequency is 344 kHZ, which does not meet the spec. This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C2 to bring the bus frequency closer to 400 kHz. BUG=b:153588771 TEST=Verified that I2C2 frequency is 380 kHz. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: I96fa5ed586de41324733ac7537b6bd73f39fc176 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47558 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-16volteer/variants/eldrid: Goodix touch panel power-on sequence tuningNick Chen
1. Enable panel stop GPIO in ramstage 2. generic.reset_delay_ms change to 30 BUG=b:171365316 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I90ca39312252c668da6298183e598392bc9f9f28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-16mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
This change adds memory parts used by variant voema to mem_parts_used.txt and generates DRAM IDs allocated to these parts. Added memory 1. H9HCNNNCRMBLPR-NEE 2. H9HCNNNFBMBLPR-NEE 3. MT53D1G64D4NW-046 WT:A BUG=b:172751925,b:172781673,b:172782100,b:172781562 TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic832155448fb07152b906aa04ca49d384ec47b34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47351 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-13mb/google/volteer/variant/lindar: Update devicetree settingsStanley Wu
Update I2C address for Goodix touchscreen and add ELAN touchscreen & Synaptics trackpad device. Follow CB:47415 to correct HID over I2C device to be level triggerd. BUG=b:160013582 TEST=emerge-volteer coreboot and check system dmesg and evtest can get device. Change-Id: I070fb0e06b588f128253270502c9c2c427c62b84 Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
As per HID over I2C Protocol Specification[1] Version 1.00 Section 7.4, the interrupt line used by the device is required to be level triggered. Hence, this change updates the configuration of the HID over I2C devices to be level triggered. References: [1] http://download.microsoft.com/download/7/d/d/7dd44bb7-2a7a-4505-ac1c-7227d3d96d5b/hid-over-i2c-protocol-spec-v1-0.docx BUG=b:172846122 TEST=./util/abuild/abuild Change-Id: Ie7b82ea07ef97b2096d75229c445bd3a65cb3be0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-11soc/intel/tigerlake: Update Kconfig for NEM Enhanced ModeShreesh Chhabbi
This change switches the selection of CAR mode so that INTEL_CAR_NEM_ENHANCED_V2 is the default unless mainboard selects INTEL_CAR_NEM. INTEL_CAR_NEM is selected only by mainboards using older silicon (ES1 or ES2) that did not support NEM enhanced mode. This enables NEM Enhanced Mode for TGL-U/Y RVPs. Bug=b:171601324 BRANCH=volteer Test=Build coreboot for volteer. Boot on SKU that has 4MB L3 cache. Change-Id: Ib6e041261cb8ca9c6e602935da4962aac0d9ece5 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/volteer/eldrid: Describe the privacy_gpioRicardo Ribalda
Add information regarding the privacy pin on the overridetree and the gpio. BUG=b:171888751 Change-Id: I1ab19a863715ba5a928dd7c16402d398e5475edc Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
This change adds memory parts used by variant voema to mem_parts_used.txt and generates DRAM IDs allocated to these parts. Added memory 1. MT53E512M64D4NW-046 WT:E 2. MT53E1G64D8NW-046 WT:E BUG=b:171755775 TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I24d466f92a7e0fa3ab2f6241f0b5af025c53ed98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-09mb/google/volteer/var/voema: config CSE LITEDavid Wu
Config voema to use CSE LITE BUG=b:171755775 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ic4ca82ce844e6367da70ed052445943572ae7b09 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-09mb/google/variant/voema: Select USE_CAR_NEM_ENHANCED_V2 for voemaDavid Wu
BUG=b:171755775 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ibedbbe8f9ac039cbde114ace3266ec067a4003ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/47159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-09mb/google/volteer: Skip TPM detection except on SPIJes Klinke
Production Volteer devices have Cr50 TPM connected via SPI, depending on Cr50 firmware version it may or may not support long enough interrupt pulses for the SoC to safely be able to enable lowest power mode. Some reworked Volteer devices have had the Cr50 (Haven) TPM replaced with Dauntless, communicating via I2C. The I2C drivers do not support being accessed early in ramstage, before chip init and memory mapping, (tlcl_lib_init() will halt with an error finding the I2C controller base address.) Since the Dauntless device under development can be made to support longer interrupts, or a completely new interrupt signalling mode, there is no need to try to go through the same discovery as is done via SPI. This CL will skip the discovery, enabling the S0i3.4 sleep mode in all cases, on the reworked test devices. BUG=b:169526865, b:172509545 TEST=abuild -t GOOGLE_VOLTEER2 -c max -x Change-Id: I08a533cede30a3c0ab943938961dc7e4b572d4ce Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47049 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09mb/google/volteer/variants/volteer2: Tune I2C3 camera bus freq 400 kHzJohnny Li
The current I2C3 bus frequency is 341 kHZ, which does not meet the spec. This change updates scl_lcnt, scl_hcnt, sda_hold value for I2C3 to bring the bus frequency closer to 400kHz. BUG=b:153588771 TEST=Verified that I2C3 frequency is 394kHz. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: Ie1ef95bb39d71fbb113120a0ec88305bc23e7ab9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-11-06mb/google/volteer/var/elemi: Update gpio and devicetreeWisley Chen
Update gpio and devicetree for elemi. BUG=b:170604353 TEST=emerge-volteer coreboot and boot into kernel Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I5b8880d485ed73aa4e65c1249c58f02c8f0c6501 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-06mb/google/variant/elemi: config CSE LITEWisley Chen
Config elemi to use CSE LITE BUG=b:170604353 TEST=emerge-volteer coreboot Change-Id: I31c7a743645d6a34ee34e750ba92c108b306ee09 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47019 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06mb/google/variant/elemi: Select USE_CAR_NEM_ENHANCED_V2 for elemiWisley Chen
BUG=b:170604353 TEST=emerge-volteer coreboot Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Change-Id: I1a1ab6f3d57d5023523b85bfb00d48d8b70a6c1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-04mb/google/volteer/var/voema: Update dq/dqs mappingsDavid Wu
Update dq/dqs mappings based on voema schematics. BUG=b:169356808 BRANCH=volteer TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I1aae4286278e712bf29ebb15738477828d3f74d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-04mb/google/volteer: clang-format mainboard.cJes Klinke
This CL is entirely generated by running the automatic formatter on this one file. BUG=None TEST=abuild -t GOOGLE_VOLTEER2 -c max -x Change-Id: Ibdd8cc2222e7af11c11df963b088ca2db07a3214 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-03mb/google/volteer: Log EC events in case of S0ix resumeFurquan Shaikh
This change adds the callback `elog_gsmi_cb_mainboard_log_wake_source()` to volteer to enable logging of EC events in case of S0ix resume. BUG=b:172272078 BRANCH=volteer TEST=Verified that EC events are logged correctly for S0ix resume: 11 | 2020-11-02 14:11:05 | S0ix Enter 12 | 2020-11-02 14:11:08 | S0ix Exit 13 | 2020-11-02 14:11:08 | Wake Source | Power Button | 0 14 | 2020-11-02 14:11:08 | EC Event | Power Button 15 | 2020-11-02 14:11:17 | S0ix Enter 16 | 2020-11-02 14:11:21 | S0ix Exit 17 | 2020-11-02 14:11:21 | Wake Source | GPE # | 112 18 | 2020-11-02 14:11:21 | EC Event | Lid Open Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7aa9dc2470da3226925927f2a0cc39fdd426e3b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47142 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb/google/volteer/var/volteer2: Merge `common_soc_config`Angel Pons
SCONFIG complains because of the duplicate devicetree entry. Change-Id: Ibdd60efdbcee5bda7c570d4b98f29cc8ede584cb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jes Klinke <jbk@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-02mb/google/volteer/variants: Describe USB ports in devicetreeDuncan Laurie
Add the USB ports to the devicetree for describing them in ACPI, including defining the port relationships and defining the reset GPIO for the bluetooth device. BUG=b:151731851 TEST=tested on volteer, all other boards were checked against the latest available schematic. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ia1e5b71e7750a478ff79372c48616bbf5c21b79c Reviewed-on: https://review.coreboot.org/c/coreboot/+/46853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-02mb/google/volteer: Add DB_USB3_NO_C option for DB_USB fieldDuncan Laurie
Define option value 6 for DB_USB where there is a Type-A port but no Type-C port on the daughterboard. BUG=b:151731851 TEST=build volteer boards Change-Id: I489d24316556dedfecd821e502f1461010b1400f Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-02mb/google/volteer: New variant for Volteer reworked with DauntlessJes Klinke
For development of the firmware to run on the Dauntless TPM, a number of Volteer2 devices are being reworked to replace the H1 chip with probe wires to connect to an external Dauntless development board. Some modification to the AP firmware is required, not least because the Dauntless chip is connected via I2C bus, instead of SPI. Most of the Dauntless developers will not otherwise have a Chrome OS chroot. Because of the above, I think it makes sense to have a new variant, for the reworked devices, which I intend to create with this CL. BUG=b:169526865 TEST=abuild -t GOOGLE_VOLTEER2_TI50 -c max -x Change-Id: Ibdcd6c2ce3941c229518f21f0e479890b5d76dd1 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-02mb/google/volteer/var/terrador: Enable SaGv supportDavid Wu
Enable SaGv for terrador. BUG=b:171763116 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie00166a619424a67f70f870e55822ae2cc6d023d Reviewed-on: https://review.coreboot.org/c/coreboot/+/46841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-11-02mb/google/volteer/variants/delbin: Update DPTF parameters for delbinFrank Chu
Configure board specific DPTF parameters for delbin BUG=b:168958222 BRANCH=volteer TEST=build and verify by thermal team Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I69aa6046fdc90a2cf59ea3a13fdb15c8bc0d29a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46676 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02volteer: Create voema variantDavid Wu
Create the voema variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:171755775 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOEMA Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I4e1872d1ebff6fefdfb232f1ff82fce95a1ec643 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47007 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02mb/google/volteer: Disable DPTF active policy for terrador and todorDavid Wu
Terrador and Todor are fanless design, so disable DPTF active policy. BUG=b:171019363,b:170699797 BRANCH=volteer TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I53a33b8706d7a7d4013a2a5627a620223fcffc3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46874 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/google/volteer: Remove RIPTO support for cameraDaniel Kang
GPIO D4 was used for camera reset for both front and rear cameras (RCAM_RST_L/FCAM_RST_L) in RIPTO. For later volteer versions, GPIO F15 is dedicated to the rear camera reset (RCAM_RST_L). Before, BOARD_GOOGLE_VOLTEER flag was used for setting the right RCAM_RST_L per volteer version. However, we don't support RIPTO anymore. Also using flags for different volteer version support can be error-prone. Removing RIPTO support. BUG=b:171726823 BRANCH=none TEST=Build and boot volteer proto2 or later version. Camera should work without an issue. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I961fc17092887b4807c12c95f7139bb7e7b33e91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46826 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/google/volteer: Separate power resource for VCMDaniel Kang
The camera privacy LED blinks during the boot and this gives a wrong impression to the users that the camera is being used during the power up. The blink happens when the camera module is probed and a series of kernel patches and coreboot patches are being submitted to resolve the issue. The kernel patches are submitted to the chromium gerrit. https://chromium-review.googlesource.com/2403386 https://chromium-review.googlesource.com/2403387 https://chromium-review.googlesource.com/2403385 https://chromium-review.googlesource.com/2403384 https://chromium-review.googlesource.com/2403383 https://chromium-review.googlesource.com/2403382 https://chromium-review.googlesource.com/2403381 https://chromium-review.googlesource.com/2403380 This is to separate the power resource for the VCM so that it can be controlled by the driver and suppress the LED turn on. BUG=b:169049942 BRANCH=none TEST=Build and boot volteer board. Monitor camera privacy LED and check if it blinks. It should not blink. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Id51c98e42c5f20e231d8096c9d2d98deebc7c968 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tomasz Figa <tfiga@google.com>
2020-10-30tigerlake mainboards: switch to devtree aliases for PMC MUX connectorsTim Wawrzynczak
Now that soc_get_pmc_mux_device() is gone, the PMC MUX connector devices can be hooked up together via devicetree aliases. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib51764da5b3c029f9ac7ac60199a0aedfc7f29b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45878 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30mb/google/volteer/variants/volteer2: I2C5 trackpad bus freq 400 kHzJohnny Li
The current I2C5 bus frequency is 367 kHZ, which does not meet the spec. This change updates scl_lcnt, scl_hcnt, scl_hcnt value for I2C5 to bring the bus frequency closer to 400kHz. BUG=b:153588771 TEST=Verified that I2C5 frequency is between 389-396kHz. Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: If0803a74ba9071acf15486ce4038261c1681a92f Reviewed-on: https://review.coreboot.org/c/coreboot/+/46142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-29mb/google/volteer: correct memory id for elemiWisley Chen
BUG=b:170604353 BRANCH=volteer TEST=emerge-volteer coreboot, and boot into kernel. Change-Id: If354aa158f3ad60193268f38278a44f9c99bf3db Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46770 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/google/volteer: Add a DPTF policy for EldridNick Chen
1. Enable dptf feature and remove fan control part from overridetree.cb 2. Update tcc offset to 5 3. Follow thermal validation and update PL2 max_power to 51 BUG=b:167931578, b:170357248 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I99e429b90ed7de08385fe51ca742865b1266eef9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-26mb/google/volteer/var/voxel: enable GPP_D17 for FCAM_PWRSheng-Liang Pan
Enable front camera power in ramstage. BUG=b:169170677 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I8b5a9a8333ed518883aa3664a115a4ba2e8a0218 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: YH Lin <yueherngl@google.com>
2020-10-26mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFFDavid Wu
Use PCIE_CLK_NOTUSED in place of 0xFF for unused PCIe ports BUG=none BRANCH=master TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I35f2bbce35420fa98541a35f77b14df7440e7980 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-26mb/google/volteer/var/terrador: Disable SRCCLKREQ1#David Wu
According to the schematic, SRCCLKREQ1# is not connected, so disable it for terrador and todor. BUG=b:171278849 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I5f7734d64390bfadbdb8d152261103adb8e75f40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-26mb/google/volteer/var/voxel: Disable SRCCLKREQ1#Sheng-Liang Pan
According to the schematic,SRCCLKREQ1# is not connected,so disable it on voxel. BUG=b:171279034 BRANCH=volteer TEST="emerge-volteer coreboot" compiles successfully. Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ibc4f766bd737f30a9ac3c7354d54398e0c36d59d Reviewed-on: https://review.coreboot.org/c/coreboot/+/46612 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-23mb/google/volteer: Add settings for noise mitgationShaunak Saha
Enable acoustic noise mitgation for volteer platforms. BUG=b:153015585 BRANCH=none TEST= Measure the change in noise level by changing the values in devicetree. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I69a6453091bf607d3c5847c99bc077e6b7dbc639 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45053 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-20mb/google/volteer/var/terrador: Configure board specific DPTF parametersDavid Wu
Configure board specific DPTF parameters for terrador and todor BUG=b:171019363,b:170699797 BRANCH=volteer TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I19935ca98ec7a078869e73d65ea471df70f37121 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-20mb/google/volteer/variants/lillipup: add generic SPDsNick Vaccaro
Add generic LPDDR4x SPD support for the following three memory parts: • K4U6E3S4AA-MGCR • H9HCNNNBKMMLXR-NEE • MT53E512M32D2NP-046 WT:F BUG=b:170264065 TEST=none Change-Id: Ie3163763a0ce291f27c43181d35c070c218b461d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-19volteer+vendorcode: Retrieve Cr50 version only via SPIJes Klinke
No recent Chromebooks have used I2C for TPM communication, and as a result, a bug has crept in. The ability to extract Cr50 firmware string is only supported via SPI, yet code in mainboard and vendorcode attempt to do so unconditionally. This CL makes it such that the code also compiles for future designs using I2C. (Whether we want to enhance the I2C protocol to be able to provide the version string, and then implement the support is a separate question.) This effort is prompted by the desire to use reworked Volteer EVT devices for validating the new Ti50/Dauntless TPM. Dauntless will primarily be using I2C in upcoming designs. BRANCH=volteer TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x Change-Id: Ida1d732e486b19bdff6d95062a3ac1a7c4b58b45 Signed-off-by: jbk@chromium.org Reviewed-on: https://review.coreboot.org/c/coreboot/+/46436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-10-19mb/google/volteer: Enable USB4 retimer driverDuncan Laurie
Enable the USB4 retimer driver with GPP_H10 as the power control. Change-Id: I166bc477f94c159bb411620a6bf77b5d1f194fb2 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-10-19mb/google/volteer/elemi: Add memory.c for DDR4Wisley Chen
Add new memory.c to support DDR4 memory types. BUG=b:170604353 TEST=emerge-volteer coreboot chromeos-bootimage Change-Id: If96b0bda0ce95766f0957c37aa7cbecefc9c03e0 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-10-14mb/google/volteer: Disable HybridStorageMode for volteer baseboardShaunak Saha
HybridStorageMode FSP UPD needs to be set only for optane storage. Enabling HybridStorageMode causes some extra delay in FspSiliconInit due to HECI command and hence is avoided for NVMe and SATA scenerios. This change disables "HybridStorageMode" for volteer baseboard. For boards using optane HybridStorage needs to be enabled from overwrite devicetree. We are enabling HybridStorage for volteer and volteer2 as those plaforms have SKU's with optane storage. BUG=b:158573805 TEST=Build and boot non optane device and confirm that FspSiliconInit time is reduced. This saves ~100ms. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I54fc78e3f888d4f2a02ba0ad6b9aef33eb872a9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/45643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13volteer: Create elemi variantWisley Chen
Create the elemi variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). BUG=b:170604353 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_ELEMI Change-Id: I6013b6d8b28610a79f5ec49d373b2897799bffef Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-12mb/google/volteer/var/voxel: disable DdiPortHpdSheng-Liang Pan
GPP_A19 and GPP_A20 set no connection, disables DdiPort1Hpd and DdiPort2Hpd BUG=b:169690329 TEST=build and verify type-c(C0/C1) port functional normally Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I4405526ae777332d3c72041db7b4eda25ae31b8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46069 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: TH Lin <t.h_lin@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-12mb/google/volteer: Fix typo in baseboard power limits Sumeet R Pawnikar
Fix typo for power limit values under comment section in baseboard BUG=None BRANCH=None TEST=Build for volteer system Change-Id: I879b9587e863360bf4efda4099d96b42b904377e Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-12mb/google/volteer/variants/eldrid: Add SPD for H5ANAG6NCJR-XNCNick Vaccaro
Add SPD support for DDR4 memory part H5ANAG6NCJR-XNC. Eldrid should use DRAM_ID strap ID 4 (0100) on SKUs populated with H5ANAG6NCJR-XNC DDR4 memory parts. BUG=b:161772961 TEST="FW_NAME=eldrid emerge-volteer coreboot" and verify it builds successfully. Change-Id: Ia26315479ce1a749a0f7c9e81f134f7068d7eb0b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-10mb/google/volteer: Use device aliasesDuncan Laurie
Use the device aliases provided by tigerlake chipset.cb instead of the raw pci device+function. Take advantage of the default states in chipset.cb and only list the devices that are enabled for all volteer variants. Change-Id: I5620004afd7fa4d50389f32dd79148960a2b2662 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44039 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09mb/google/volteer/variants/volteer2: Update DPTF parametersTerry Chen
1. Apply the DPTF parameters received from the thermal team. BUG=b:169183507 TEST=build and verify by thermal tool Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I1a1a0f9e86e519ac15904fac80cf3c2299213e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-08mb/google/volteer: disable TBT if no USB4 hardware availableNick Vaccaro
Implement mainboard_silicon_init_params() to allow for disabling of TBT root ports if the device does not have usb4 hardware. Add code to mainboard_memory_init_params() to disable memory-related settings associated with TBT in cases where no usb4 is available. BUG=b:167983038 TEST=none Change-Id: Iab23c07e15f754ca807f128b9edad7fdc9a44b9d Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-10-05mb/google/hatch,dedede,volteer: enable CHROMEOS_DRAM_PART_NUMBER_IN_CBINick Vaccaro
Enable CHROMEOS_DRAM_PART_NUMBER_IN_CBI on hatch, dedede, and volteer to use the common version of mainboard_get_dram_part_num(). Remove duplicate instances of mainboard_get_dram_part_num(). BUG=b:169789558, b:168724473 TEST="emerge-volteer coreboot && emerge-hatch coreboot && emerge-dedede coreboot" and verify it builds. Change-Id: I4e29d3e7ef0f3370eab9a6996a5c4a21a636b40e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45883 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05mb, soc: change mainboard_get_dram_part_num() prototypeNick Vaccaro
Change mainboard_get_dram_part_num() to return a constant character pointer to a null-terminated C string and to take no input parameters. This also addresses the issue that different SOCs and motherboards were using different definitions for mainboard_get_dram_part_num by consolidating to a single definition. BUG=b:169774661, b:168724473 TEST="emerge-volteer coreboot && emerge-dedede coreboot && emerge-hatch coreboot" and verify build completes successfully. Change-Id: Ie7664eab65a2b9e25b7853bf68baf2525b040487 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45873 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-05mb/{google,intel}/{volteer,tglrvp}: Refer to common IPU ASLSubrata Banik
Delete SoC local copy of ipu.asl and refer from common block ipu.asl TEST=Dump and disassemble DSDT on tglrvp, verify IPU0 device present there. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I6a0f8a919092f7bbcd64d4791746d30fdee33894 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-30mb/google/volteer: Update SLP_Sx assertion widths and PwrCycDurJamie Ryu
This patch updates the SLP_Sx assertion widths and power cycle duration for volteer. Power cycle duration: With default value, S0->S5 -> [ ~4.2 seconds delay ] -> S5->S0 With value set to 1, S0->S5 -> [ ~1.2 seconds delay ] -> S5->S0 BUG=b:159108661 TEST=Verified that the power cycle duration is 1~2s with a global reset on volteer. Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Idf4e0c3a60b4ac59e31df1357f2ff28f195ff17f Reviewed-on: https://review.coreboot.org/c/coreboot/+/44559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-09-29mb/google/volteer: Change default camera power GPIO to 0Daniel Kang
The default GPIO values for camera power were set as 1 so the LED was turned on by default when the board is powered on. This status is kept until the camera is probed then being turned off. So the LED is turned on for a few seconds during the boot up. By setting the default power to 0, the LED is lit only when camera is turned on for probing and this should be just a blink. BUG=b:167635396 BRANCH=none TEST=Build and boot volteer board. Monitor camera privacy LED and check it is not lit more than 0.5 seconds. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: Ic7df391aa512daafe6e1ce49e9222b90e17ad806 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45058 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-29mb/google/volteer/halvor: Update settings for audio functionFrank Wu
Configure overridetree settings for audio function. BUG=b:153680359, b:163382106 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I107f6fc21b99d80d69931139dc50e7d5873a8e52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-29mb/google/volteer: Add "i2c-allow-low-power-probe" property forDaniel Kang
cameras There is a patch https://lkml.org/lkml/2020/9/3/235 which allows i2c device can support driver probe without power up the device. In order to support this, need add coreboot add "i2c-allow-low-power-probe" property. BUG=b:169058784 BRANCH=none TEST=Build and boot volteer board. Monitor camera privacy LED and check it blinks. It should not blink. Signed-off-by: Daniel Kang <daniel.h.kang@intel.com> Change-Id: I46f90ff8d412b18c7ee4bd7f22f9a7db771eb84f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-09-28mb/volteer: Use Genesys Logic GL9755 for Delbin, Volteer2Ravi Sarawadi
Enable newly added PCIe Gen2 to SD 4.0 card reader controller GL9755 for Delbin and Volteer2. BUG=b:166141961 TEST=Boot to kernel on Delbin, Volteer2 boards. Check PC10 in IDON. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I2589ab2334625ec0d20dbdd5f3a31d98235aad2d Reviewed-on: https://review.coreboot.org/c/coreboot/+/45708 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-28mb/google/volteer/variants/eldrid: Configure GPP_S4 and GPP_S5nick_xr_chen
GPP_S4 and GPP_S5 use as DMIC pins that need to be defined as NF2 BUG=b:168564129 Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: Ia1fca960ac85f253882f0aa68b370eed49ac67b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
2020-09-28mb/google/volteer/var/terrador: Enable audio SMBIOS OEM stringKevin Cheng
It needs to use probe statement in overridetree.cb to enable the cache of fw_config field implemented by cb:44782 and cb:44783. BUG=b:161963281 TEST= dmidecode -t 11 shows correct audio fw_config. Handle 0x0009, DMI type 11, 5 bytes OEM Strings String 1: DB_USB-USB4_GEN2 String 2: AUDIO-MAX98373_ALC5682I_I2S_UP4 Signed-off-by: Kevin Cheng <kevin.cheng@intel.com> Change-Id: I68c19b67d945aaca3e9ebec87eb27a4b07e1a49e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-28mb/google/volteer: Improve Eldrid Port 1 USB2 Eye Diagramnick_xr_chen
In order to pass DB type-C USB2 eye diagram, DB USB2 PHY register needs to be overridden. port#1 PortUsb20Enable=1 Usb2PhyPetxiset=7 Usb2PhyTxiset=7 Usb2PhyPredeemp=3 Usb2PhyPehalfbit=0 BUG=b:169105751 Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: If076c644783fa2992ac062d6469f9c49e6d5ff24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-25mb/google/volteer: Wake on AC connect and disconnectAbe Levkoy
Add AC connect and disconnect to S0ix lazy wake sources. BUG=b:161466940 BRANCH=master TEST=Connect and disconnect charger in S0ix; observe wake Change-Id: I30046a379ff75c33b991e355cc8d142241ee8b2e Signed-off-by: Abe Levkoy <alevkoy@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45669 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-25volteer: Create boldar variantRonak Kanabar
Create the boldar variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.2.0). Add "memory/Makefile.inc" generated by gen_part_id.go BUG=b:162202257 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_BOLDAR Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: I92b4b917448d8e5e9176cb983adf7b209956d2c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-09-24mb/google/volteer: Enable CnviBtAudioOffloadJohn Zhao
This change enables CnviBtAudioOffload. FSP is invoked to configure BT over USB and BT I2S pins for cAVS connection. BUG=b:169045123 TEST=Verifed CnviBtCore and CnviBtAudioOffload settings and FSP configuration. Booted up to kernel on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I1780da0824d145a79743d5cffdea4821236d4f74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naveen M <naveen.m@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-24mb/google/volteer/var/voxel: Update gpio settings for EVTSheng-Liang Pan
Based on EVT schematic and gpio table of voxel, update gpio settings for voxel EVT. BUG=b:156841729 TEST=FW_NAME=voxel emerge-volteer coreboot chromeos-bootimage Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Idf88d83ad6d873283eb1eb8a45459ae3e74df124 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45173 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-23treewide: rename GENERIC_SPD_BIN to HAVE_SPD_BIN_IN_CBFSMichael Niewöhner
The name GENERIC_SPD_BIN doesn't reflect anymore what that config is used for, so rename it to HAVE_SPD_BIN_IN_CBFS. Change-Id: I4004c48da205949e05101039abd4cf32666787df Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45147 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
Change-Id: I4151d1a6ce94763432f307fbc8bc4afe229856ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-21volteer: set GSPI CS to deasserted by defaultCaveh Jalali
This sets the state of GSPI chip select to 1 (deasserted) as applied by the FSP during the silicon init phase. GSPI 0 and 1 are set to CS mode manual in the SerialIoGSpiCsMode section which means we need to explicitly configure CS to deasserted in the SerialIoGSpiCsState section. GSPI0 is the CR50 and GSPI1 is the fingerprint sensor. We were running into problems where the normal expected CS toggle sequence to wake up CR50 did not work because CS was already asserted when it was expected to be deasserted, leading to TPM timeouts. BUG=b:168090038 TEST=booted on volteer, no more "TPM flow control failure" messages; verified fingerprint enrollment still works. Change-Id: I47aa5db429d75e66095d58a1eb77963dcfc3b9f3 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45384 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21mb/google/volteer: Add firmware configuration for MAX98373_ALC5682I_I2S_UP4Frank Wu
Add MAX98373_ALC5682I_I2S_UP4 firmware configuration option and configure GPIOs properly for UP4 design. The design is also for Halvor. BUG=b:153680359, b:163382106 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage, fw_config value in Halvor: > AUDIO=MAX98373_ALC5682I_I2S_UP4 ectool cbi set 6 0x00000400 4 2 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ie25f278dfbdc2f41a36b70403699a2e3c2234600 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-21mb/google/volteer: fw_config: Add fields for keyboard featuresDuncan Laurie
Add newly defined fields for presence of keyboard backlight and number pad to the firmware configuration table. We don't have a need to use these in coreboot (yet) but this keeps the bit definitions in sync. BUG=b:166707536 TEST=abuild -t google/volteer Change-Id: I066e445f7d0be056e45737d2c538be1850ae85aa Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-18mb/google/volteer: Remove redundant GPIO decls in EldridTim Wawrzynczak
GPP_A19 and GPP_A20 are already declared as NC in the baseboard. Change-Id: I02f5751a70b51a197320b865d18da3a4ffeb87f7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45485 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-18mb/google/volteer/eldrid: Add option to enable WiFi SAR configsMalik_Hsu
This change adds a user selectable option to enable all WiFi SAR configs that apply to volteer BUG=b:168169690 TEST=1. cros-workon-volteer start coreboot-private-files-baseboard-volteer 2. USE="project_eldrid" emerge-volteer chromeos-config coreboot-private-files-baseboard-volteer 3. check wifi_sar-eldrid.hex in coreboot-private/3rdparty/blobs/baseboard-volteer Change-Id: I6b74cd2b34ebb99cc59d456e28fd7ab2399d71d0 Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45233 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17mb/volteer: Select USE_CAR_NEM_ENHANCED_V2 for Tigerlake QS basedShreesh Chhabbi
platforms BUG=b:145958015 TEST= Build Volteer coreboot and boot on Volteer Proto 2 and Delbin. Cq-Depend:chrome-internal-review:3249528 Change-Id: I0ff896424ab23dba43075c44eb9b2c2c480ccbfb Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-17mb/google/volteer/variants/eldrid: Configure DP_HPD as PAD_NCnick_xr_chen
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:165893624, b:168090618 Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I31b25be1c9248debf855435c7b688b358e2cd57e Reviewed-on: https://review.coreboot.org/c/coreboot/+/45246 Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-14mb/google/delbin: Configure DP_HPD as PAD_NC and disable DdiPortHpdRavi Sarawadi
GPP_A19(DP_HPD1) and GPP_A20(DP_HPD2) were configured native function (NF1) without internal pull-down which wrongly presents HPD interrupts. DP_HPD had been removed for EVT design as those events are through eSPI. This change configures GPP_A19 and GPP_A20 to be no connection and disables DdiPort1Hpd and DdiPort2Hpd. BUG=b:162566436 TEST=Booted to kernel and verified no kernel HPD pins assertion message on Delbin board. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: Ifdef8ee438276678258b75d2fb70c6dfc7ee0a33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-14mb/google/volteer: Fix GPP_E12 definitionCaveh Jalali
GPP_E12 should not be defined in the baseboard as its use is determined by the variant. For legacy reasons, we still have GPP_E12 defined in early_gpio but should not. Malefor and volteer* have the same GPP_E12 definition, but that is a misconfiguration. I think that was a copy-paste that slipped through the reviews. BUG=b:157597158 TEST=volteer2 boots to the OS Change-Id: Ic3ef864827aa94b0b96e335565119f3d5d008837 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-09-14mb/google/volteer/var/voxel: Update DPTF parameters and TCC offsetDavid Wu
1. Set tcc offset to 5 degree celsius 2. Apply the DPTF parameters received from the thermal team. BUG=b:167523658 TEST=build and verify by thermal team Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I01a6fc5bd959798c8dd423df3907c69c883733e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-14mb/google/volteer: Refactor baseboard devicetreeTim Wawrzynczak
Clean up the DPTF section of the baseboard devicetree; this makes overrides simpler, as not necessarily all of the fields need to be overridden. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Iad46fd02f7602c9419d7c3674b0d2b6f5add9a93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45179 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14mb/google/volteer: Add error handlingJohn Zhao
Coverity detects missing error handling after calling function tlcl_lib_init. This change checks the function tlcl_lib_init return value and handles error properly. Found-by: Coverity CID 1432491 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ife38b1450451cb25e5479760d640375db153e499 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-14mb/google/volteer: Enable EC software syncDavid Wu
Enable EC software sync for terrador and todor BUG=None TEST=emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8c463eadd19d99dc04923f7400560cf7ba4b8101 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-09-11mb/google/volteer/variants/volteer2: route GPP_F14 via APICAlex Levin
GPP_F14 should be configured to be routed via APIC and not SCI. BUG=b:162528549 TEST=verified on a volteer2 Signed-off-by: Alex Levin <levinale@google.com> Change-Id: I7f2c7af230dd75b3cb3806e2b186725d49da9e68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45279 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09mb/google/volteer/var/trondo: Add memory parts and generate DRAM IDsDavid Wu
Add memory parts and generate DRAM IDs for trondo. BUG=None TEST=FW_NAME=trondo emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I2e89ecaf73a30595ed48ac9ce94ccbd4bb7ed3c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45164 Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-09mb/google/volteer/variants/eldrid: add memory.c for ddr4 supportnick_xr_chen
Add new memory.c to support DDR4 memory types. Use the new meminit_ddr() and variant_memory_sku() for eldrid variant code on memory.c The initial settings override the baseboard from volteer and fine tune gpio.c and overridetree.cb on eldrid's configuration. BUG=b:161772961 TEST='emerge-volteer coreboot chromeos-bootimage' and verify that Eldrid can boots. NOTE that tests the ddr4 side of the implementation. Change-Id: I2c7b30093a8d85bac5aba5b83768af5eb36c4f70 Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-08mb/google/volteer: config QS silicon devices for CSE LITEMark Hsieh
Configure eldrid to use CSE Lite. BUG=b:158140797 TEST=cd to volteer's asset_generation folder, execute "./gen_all_variant_images.sh" and verify that all variant images are produced. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: I357abdac4102f358d3aa1cb50f600312039ef140 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-09-08mainboard/google/volteer: Disable S0i3.4 if cr50 firmware is too oldJes Klinke
For Volteer (and future Tiger Lake boards) we can enable mode S0i3.4 only if we know that the Cr50 is generating 100us interrupt pulses. We have to do so, because the SoC is not guaranteed to detect pulses shorter than 100us in S0i3.4 substate. A new Kconfig setting CR50_USE_LONG_INTERRUPT_PULSES controls new code running in verstage, which will program a new Cr50 register, provided that Cr50 firmware is new enough to support the register. This CL adds code to detect the case when Cr50 is unable to generate longer pulses, and in that case explicitly disable the S0i3.4 substate as well as setting gpio_pm_override to all zeroes. This will increase power usage slightly, but guarantee that the GPIO block in the SoC does not switch to a slower sampling clock. In practice, this case will only be encountered in the factory, before the Cr50 chip is updated to a new RW image. (Prior to this change, the gpio_pm_override was hardcoded to zero for Volteer, but the S0i3.4 substate was not disabled. According to my conversations with Intel engineers, that was not enough to guarantee detection pulses shorter than 100us. But it is entirely possible that we have just been "lucky" that the SoC has not gone into low power mode during the boot process, where most of the cr50 communication happens.) TEST=util/abuild/abuild -t GOOGLE_VOLTEER -c max -x BUG=b:154333137 Change-Id: Idef1fffd410a345678da4b3c8aea46ac74a01470 Signed-off-by: Jes Bodi Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-09-06mb: remove duplicated Make code for spd.bin generationMichael Niewöhner
Drop duplicated code for spd.bin generation that is provided globally in lib/Makefile.inc. For all affected boards it has been verified that the output binary functionally matches the original one. The changed execution order of Make instructions influenced the cbfs file order. Hence, the rom images can't be compared directly. Thus, the output files of the two timeless abuild runs have been compared. Further, it was verified that the final files in cbfs stay identical, by comparing the extracted cbfs of each board. The boards (possibly) needing modification could be found with something like this (with false positives, though): find src/mainboard -name Makefile.inc | \ xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-04mb/google/volteer/variant/lindar: Update memory settingsRasheed Hsueh
Based on the Lindar's schematic, generate memory settings. util: rename lp4x spds to include "lp4x-" in name BUG=b:161089195 TEST=FW_NAME=lindar emerge-volteer coreboot chromeos-bootimage Signed-off-by: Rasheed Hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I1ec35d62f8ed21356329b78a614114edad78c2bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/45064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Michael Niewöhner
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:29:29 +0000