summaryrefslogtreecommitdiff
path: root/src/mainboard/google/volteer
AgeCommit message (Expand)Author
2021-01-07mb/google/lindar: Fix building with CONFIG_CHROMEOS unsetMatt DeVillier
2021-01-06mb/google/volteer/var/voema: Update Aux settings for Port 0David Wu
2021-01-05mb/google/volteer/var/voema: Enable IPU for voemaDavid Wu
2020-12-24mb/google/volteer/variant/lindar: Add SSD D3 cold supportKevin Chang
2020-12-24mb/google/volteer/var/voema: Disable PCIe 7 and 8 for WLAN and SD cardDavid Wu
2020-12-24mb/google/volteer/var/voema: Enable RTD3 for the NVMe deviceDavid Wu
2020-12-22mb/google/volteer: Add GPIO to drobit supportFrankChu
2020-12-22mb/google/volteer: Update SPD table for drobitFrankChu
2020-12-22mb/google/volteer: Update drobit device treeFrankChu
2020-12-21volteer/variants/eldrid: Enable RTD3 for the NVMe deviceNick Chen
2020-12-11mb/google/volteer: Clean up romstage and ramstage UPDsTim Wawrzynczak
2020-12-11mb/google/volteer: Make use of fw_config_is_provisioned()Tim Wawrzynczak
2020-12-11mb/google/volteer/variant/lindar: Correct IOM port configurationKevin Chang
2020-12-11mb/google/volteer: Improve type-C Port 1 USB2 Eye Diagram for delbinFrankChu
2020-12-11mb/google/volteer: Assert BT_DISABLE_L (GPP_A13) in early_gpio_tableAlex Levin
2020-12-10mb/google/volteer: Fix a few devicetree device refsTim Wawrzynczak
2020-12-09mb/google/volteer/variant/volta: add Synaptics touchpad.Sheng-Liang Pan
2020-12-09mb/google/volteer: Reorganize FMAPFurquan Shaikh
2020-12-08mb/google/volteer/variant/lindar: Add PMC.MUX.CONx device configuration and d...Kevin Chang
2020-12-08mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
2020-12-08mb/google/volteer: Update I2C5 bus freq and devicetree.Stanley Wu
2020-12-08mb/google/volteer: ACPI nodes for volteer2_ti50Jes Klinke
2020-12-08mb/google/volteer/variants: Update Power Limit2 minimum valueSumeet R Pawnikar
2020-12-07mb/google/volteer/var/elemi: use devtree aliases for PMC MUX connectorsWisley Chen
2020-12-05mb/google/volteer/var/voema: Add MIPI camera supportDavid Wu
2020-12-05mb/google/volteer: Create copano variantFrankChu
2020-12-05mb/google/volteer/variant/lindar: Correct SD card reader power sequenceKevin Chang
2020-12-02mb/google/volteer: Add fw_config entries for boot deviceDuncan Laurie
2020-12-02mb/google/volteer: Add additional SD cards to device listDuncan Laurie
2020-11-30mb/google/volteer: Create drobit variantFrank Chu
2020-11-30mb/google/volteer/variants/delbin: Enhance I2C5 bus freq closer 400 kHzFrank Chu
2020-11-30mb/google/volteer/variant/copano: Add memory part supportNick Vaccaro
2020-11-29mb/google/volteer: eldrid: use devtree aliases for PMC MUX connectorsScott Chao
2020-11-25mb/google/volteer: Update Eldrid USB2 port settings in overridetreeNick Chen
2020-11-25mb/google/volteer/variant/lindar: change speaker smart amplifier to ALC1011Stanley Wu
2020-11-25mb/google/volteer/var/elemi: Add H5ANAG6NCJR-XNCWisley Chen
2020-11-24mb/google/volteer/var/voxel: Update DPTF parametersSheng-Liang Pan
2020-11-24mb/google/volteer: fw_config: Add setting for new sd readersZhuohao Lee
2020-11-22mb/google/volteer: Remove unused devices for terrador and todorDavid Wu
2020-11-22mb/google/volteer/var/voema: Update gpio and devicetree settingsDavid Wu
2020-11-20mb/google/volteer/var/elemi: Update gpioWisley Chen
2020-11-20mb/google/volteer/var/elemi: enable Genesys Logic GL9763EWisley Chen
2020-11-20mb/google/volteer: Add keyboard layout to fw_configDuncan Laurie
2020-11-20mb/google/volteer/variants: Set TCSS PCIe RP0 to hidden by defaultDuncan Laurie
2020-11-20mb/google/volteer: Set up SATAXPCIE1 IOSSTATE based on detected deviceDuncan Laurie
2020-11-20mb/google/volteer: Enable RTD3 for SD cardDuncan Laurie
2020-11-20mb/google/volteer/variants: Enable RTD3 for the NVMe deviceDuncan Laurie
2020-11-20soc/intel/common/acpi,mb/*: replace the two obsolete LPID with PEPDMichael Niewöhner
2020-11-19soc/intel/common/acpi: rename LPID to PEPDMichael Niewöhner
2020-11-19mb/google/volteer/var/terrador: Correct enable_gpio to GPP_F16David Wu
2020-11-18mb/google/volteer: Add new Audio option to FW_CONFIGWisley Chen
2020-11-18mb/google/volteer: Update flashmap descriptor to add ME_RW_A/B regionJamie Ryu
2020-11-17mb/google/volteer/variants/volteer2: Tune Volteer2 I2C2 bus frequencyJohnny Li
2020-11-16volteer/variants/eldrid: Goodix touch panel power-on sequence tuningNick Chen
2020-11-16mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
2020-11-13mb/google/volteer/variant/lindar: Update devicetree settingsStanley Wu
2020-11-13mb/google/volteer: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-11soc/intel/tigerlake: Update Kconfig for NEM Enhanced ModeShreesh Chhabbi
2020-11-09mb/google/volteer/eldrid: Describe the privacy_gpioRicardo Ribalda
2020-11-09mb/google/volteer/var/voema: Add memory parts and generate DRAM IDsDavid Wu
2020-11-09mb/google/volteer/var/voema: config CSE LITEDavid Wu
2020-11-09mb/google/variant/voema: Select USE_CAR_NEM_ENHANCED_V2 for voemaDavid Wu
2020-11-09mb/google/volteer: Skip TPM detection except on SPIJes Klinke
2020-11-09mb/google/volteer/variants/volteer2: Tune I2C3 camera bus freq 400 kHzJohnny Li
2020-11-06mb/google/volteer/var/elemi: Update gpio and devicetreeWisley Chen
2020-11-06mb/google/variant/elemi: config CSE LITEWisley Chen
2020-11-06mb/google/variant/elemi: Select USE_CAR_NEM_ENHANCED_V2 for elemiWisley Chen
2020-11-04mb/google/volteer/var/voema: Update dq/dqs mappingsDavid Wu
2020-11-04mb/google/volteer: clang-format mainboard.cJes Klinke
2020-11-03mb/google/volteer: Log EC events in case of S0ix resumeFurquan Shaikh
2020-11-02mb/google/volteer/var/volteer2: Merge `common_soc_config`Angel Pons
2020-11-02mb/google/volteer/variants: Describe USB ports in devicetreeDuncan Laurie
2020-11-02mb/google/volteer: Add DB_USB3_NO_C option for DB_USB fieldDuncan Laurie
2020-11-02mb/google/volteer: New variant for Volteer reworked with DauntlessJes Klinke
2020-11-02mb/google/volteer/var/terrador: Enable SaGv supportDavid Wu
2020-11-02mb/google/volteer/variants/delbin: Update DPTF parameters for delbinFrank Chu
2020-11-02volteer: Create voema variantDavid Wu
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-11-02mb/google/volteer: Disable DPTF active policy for terrador and todorDavid Wu
2020-10-30mb/google/volteer: Remove RIPTO support for cameraDaniel Kang
2020-10-30mb/google/volteer: Separate power resource for VCMDaniel Kang
2020-10-30tigerlake mainboards: switch to devtree aliases for PMC MUX connectorsTim Wawrzynczak
2020-10-30mb/google/volteer/variants/volteer2: I2C5 trackpad bus freq 400 kHzJohnny Li
2020-10-29mb/google/volteer: correct memory id for elemiWisley Chen
2020-10-26mb/google/volteer: Add a DPTF policy for EldridNick Chen
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-26mb/google/volteer/var/voxel: enable GPP_D17 for FCAM_PWRSheng-Liang Pan
2020-10-26mb/google/volteer: Use PCIE_CLK_NOTUSED in place of 0xFFDavid Wu
2020-10-26mb/google/volteer/var/terrador: Disable SRCCLKREQ1#David Wu
2020-10-26mb/google/volteer/var/voxel: Disable SRCCLKREQ1#Sheng-Liang Pan
2020-10-23mb/google/volteer: Add settings for noise mitgationShaunak Saha
2020-10-20mb/google/volteer/var/terrador: Configure board specific DPTF parametersDavid Wu
2020-10-20mb/google/volteer/variants/lillipup: add generic SPDsNick Vaccaro
2020-10-19volteer+vendorcode: Retrieve Cr50 version only via SPIJes Klinke
2020-10-19mb/google/volteer: Enable USB4 retimer driverDuncan Laurie
2020-10-19mb/google/volteer/elemi: Add memory.c for DDR4Wisley Chen
2020-10-14mb/google/volteer: Disable HybridStorageMode for volteer baseboardShaunak Saha
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
2020-10-13volteer: Create elemi variantWisley Chen
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 16:42:51 +0000