| Age | Commit message (Collapse) | Author |
|---|
|
All parameters of DPTC_INPUT() need to be configured on devicetree
when SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enabled. The parameters without
configurations on devicetree would be 0 when
SOC_AMD_COMMON_BLOCK_ACPI_DPTC is enable. Follow AMD DevHub document
#57316. Configure vrm_current_limit_mA, vrm_maximum_current_limit_mA
and vrm_soc_current_limit_mA on devicetree with thermal table config E
as default table for SMT. Since the dynamic thermal table switching
mechanism is still under cooking, after discussing with thermal team,
suggest adopting config E(limit Soc not reach to max power) as default
thermal config to avoidany thermal-related issue during phase build.
Once the dynamic thermal table switching mechanism is finished, will
change the default value to config A.
BUG=b:258572474, b:248976976, b:259167917, b:257394883
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Ic1e7a46cac4119c7237d96a7bd0d23c8db028680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
It shouldn't be assumed that all variants of skyrim will use the same
gpio for TPM interrupts.
Use the PSP's new mailbox command to tell it what gpio the tpm interrupt
comes in on.
BUG=b:248193764
TEST=tast run <ip> hwsec.TPMContest
Verify log entry:[DEBUG] PSP: Setting TPM GPIO to 18...OK
Use incorrect GPIO in mailbox cmd and verify TPMContest test
failed.
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Change-Id: I9f4005e10987caf9f32e5ac99ff5f2b9467e586c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69874
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update touchscreen setting.
Change hid as panel team request to fix touchscreen with no function.
The panel team verification result is on b/251378772 comment#17.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Follow Dynamic Thermal Table Switching proposal to initialize
thermal table config E as default table for SMT.
Since the dynamic thermal table switching mechanism is still
under cooking, after discussing with thermal team, suggest
adopting config E(limit Soc not reach to max power) as default
thermal config to avoid any thermal-related issue during phase
build. Once the dynamic thermal table switching mechanism
is finished, will change the default value to config A.
BUG=b:232946420, b:258572474
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I4aa90304e1e7bda7d580de2582129191e9eb0e76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Create the crystaldrift variant of the skyrim reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:240970782
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_CRYSTALDRIFT
Signed-off-by: Chao Gui <chaogui@google.com>
Change-Id: Ibb3ebaa7e4af1a03173b93b8c4fbd342f7cd7100
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Now that coreboot performs the necessary power sequencing, switch
from using the 'probed' flag to 'detect' for all I2C touchscreens.
This alleviates ChromeOS from having to probe to see which
touchscreen model is actually present, prevents breaking ACPI spec
by generating device entries with status 'enabled and present'
which aren't actually present, and improves compatibility with
upstream Linux and Windows.
BUG=b:121309055
TEST=build/boot ChromeOS and Linux on skyrim, ensure touchscreen is
functional, and ACPI device entry generated for correct touchscreen
model.
Change-Id: Id9e3089decf0f94a1358929684ce248e52cbe41f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Assuming variants have a touchscreen by default, set the enable GPIO
high and hold in reset during romstage, then release reset in ramstage.
This will allow the touchscreen to make use of the runtime I2C detect
feature (enabled in a subsequent commit) so that an ACPI device entry
is created only for the touchscreen actually present.
Variants/SKUs which do not have a touchscreen (if any) can use the
romstage/ramstage GPIO override tables to set the associated enable/
reset GPIOs to NC.
BUG=b:121309055
TEST=build/boot skyrim with rest of patch series
Change-Id: Ic4d7ac8f951bb94da2216a24dc85a96275c9d449
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Update touchscreen setting.
ELAN900C is the I2C over hid device with slave address 0x10.
MELF0410 is the pure I2C device with slave address 0x34.
The LCD team verification result is on b/251378772 comment#11.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I568346d2abc39d9427e49c3b21f38db0184b8b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Update H58G56BK7BX068 and H58G66BK7BX067 support
BRANCH=None
BUG=b:243337816
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I2aa6169c6e824318e738878f8cd19e76fcfd5713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Update devicetree based on the schematic_20221014.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ia03962b0e01394ddcd4971cbe0172ef5bd913e15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68482
Reviewed-by: Chao Gui <chaogui@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
|
|
The touchscreen IRQ has been configured as LEVEL_LOW in skyrim projects.
Therefore, update the gpio.c to be consistent with the configuration.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Iccfe5b01f10899c43151762e4730a05990afa602
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Configure GPIOs based on GPIO_20221014.xlsx of frostflow.
BUG=b:253506651, b:251367588
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I02272801c85a7c30d24c834a840e026225956fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
H9JCNNNCP3MLYR-N6E 1 (0001)
MT62F2G32D8DR-031 WT:B 2 (0010)
H9JCNNNFA5MLYR-N6E 3 (0011)
BUG=b:250470704, b:247683159
BRANCH=None
TEST=FW_NAME=frostflow emerge-skyrim coreboot
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I34584092c938539c91d65501ebe34b00212b34d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add two memory parts and generate the associated DRAM part ID.
1) Hynix H58G66AK6BX070
2) Micron MT62F1G32D2DS-026 WT:B
BUG=b:251363645
TEST=none
Change-Id: Iceb31576533a5b29c5957170473152014fc7e9c8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Switch from gpio_configure_pads() to gpio_configure_pads_with_override()
so variants can override romstage GPIO defaults. Rename baseboard
function and add an weak empty override function to be used by variants.
Will be used for touchscreen power sequencing in a follow-on commit.
Change-Id: I45586237919cd07a171beac57f3510e26338f67f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Create the frostflow variant of the skyrim reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:240970782
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_FROSTFLOW
Signed-off-by: Chao Gui <chaogui@google.com>
Change-Id: I937e6562094968824e73bfa20390b3ec8b24dfa0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Rename so table more indicative of when GPIOs are set, and so it can
be used for more than just setting PCIe GPIOs.
Rename the getter function to match.
Change-Id: I285602209072247895c2cb0830f3faf675328757
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Icebf7e11736929389227063039575a4c5ecf3840
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Modify GXTP7863 generic.irq to generic.irq_gpio.
BUG=b:245082617
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Iaf6cc6010132d5b33b06909ceb1069115a911b48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
'Mendocino' was an embargoed name and could previously not be used.
Update references for consistency with the correct naming convention.
BUG=b:245727030
TEST=builds and boots to kernel
Cq-Depend: chrome-internal:4878294
Cq-Depend: chromium:3763392
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ic0248a872dfc92486658aa9bd92bed755dbf59d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67750
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the Low/No Battery Mode DPTC values for Skyrim.
These values were generated by AMD.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I5f277761cb7379b4344492f95010d8d5ddd689fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67693
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the Normal Mode DPTC values for Skyrim.
These values were generated by AMD.
BRANCH=none
BUG=b:217911928
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I1e1f55b941f3e70aad33d55a90fb012eac3ba12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67690
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As of commit 2cf52d80a6ec ("mb/*/{device,override}tree: Set touchpads to
use detect (vs probed) flag") all touchpads in the tree have been
switched from using the 'probed' flag to 'detect.' Winterhold was added
in between the time that patch was pushed and merged, so switch these
instances over too.
Change-Id: I34e1265ecd6409f720ae486926c5078f626fc693
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67487
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Historically, ChromeOS devices have worked around the problem of OEMs
using several different parts for touchpads/touchscreens by using a
ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel)
to indicate that the device may or may not be present, and that the
driver should probe to confirm device presence.
Since c636142b, coreboot now supports detection for i2c devices at
runtime when creating the device entries for the ACPI/SSDT tables,
rendering the 'probed' flag obsolete for touchpads. Switch all touchpads
in the tree from using the 'probed' flag to the 'detect' flag.
Touchscreens require more involved power sequencing, which will be done
at some future time, after which they will switch over as well.
TEST: build/boot at least one variant for each baseboard in the tree.
Verify touchpad works under Linux and Windows. Verify only a single
touchpad device is present in the ACPI tables.
Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Initialize winterhold devicetree.
BUG=b:241196632
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9fe224cdc2acb1f13d3bf9341b487892c15f8ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Follow FT6_SOC_GPIO_PM&Strap_20220815A.XLSX
update Gpio setting
BUG=b:240824497
BRANCH=None
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I2086c326cbf46ba6378d18d37dcbbe9fafa6b2bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
elog_gsmi_cb_mainboard_log_wake_source is called from SMI and causes
eSPI transactions. If the SMI interrupts an ongoing eSPI transaction
from the OS it will conflict and cause failures. Removing this call to
avoid conflicts. This can be re-enabled after refactoring
google_chromeec_get_mask to use ACPI MMIO.
This is a copy of CB:63280 but for skyrim.
BUG=b:227163985, b:243557044
TEST=suspend/resume skyrim and no longer see EC wake sources in elog.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iac56840fe15101bc556d8cce9960f761c6ea7181
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
As part of investigating b/240690391 I noticed that we were missing
the daughter board ports. Not all SKUs have these ports connected,
but it doesn't hurt to have the extra ACPI nodes.
BUG=none
TEST=build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id6fc34acbfa30bc15e697043bf93bcf584256128
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Update memory and RAMID table
BRANCH=None
BUG=b:243337816
TEST= emerge-coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Iec3c2098be86661249b1786a02f0768f9d8ad0ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Create the morthal variant of the skyrim reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:240970782
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_MORTHAL
Signed-off-by: Moises <moisesgarcia@google.com>
Change-Id: I25c25f067a040e6930f4fc60fadb8be85dc8eda6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Add ELAN touch support
BUG=b:243120074
TEST=emerge coreboot and check ELAN touch screen is workable
Change-Id: If30232b3da9af0015d6d87535b53f905c5a30bcb
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66912
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Isaac Lee <isaaclee@google.com>
|
|
The I2C config was unnecessarily placed in the overridetree. As we
prepare for fanout, this is going to cause unnecessary noisy changes.
Move the I2C config to the devicetree to avoid this.
BUG=None
TEST=Build
Change-Id: I09ad5c911a0fd00274761cb71e9b659b47cd6da1
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66802
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the winterhold variant of the skyrim reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:240970782
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_WINTERHOLD
Signed-off-by: Isaac Lee <isaaclee@google.com>
Change-Id: I0e16f0a674aa3f4687cd82d5840a3c2087148a51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66620
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
'Mendocino' was an embargoed name and could previously not be used
in references to Skyrim. coreboot has references to sabrina both
in directory structure and in files. This will make life difficult
for people looking for Mendocino support in the long term. The code
name should be replaced with "mendocino".
BUG=b:239072117
TEST=Builds
Cq-Depend: chromium:3764023
Cq-Depend: chromium:3763392
Cq-Depend: chrome-internal:4876777
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The default state for the IRQ lines when the eSPI controller comes out
of reset is high. This is because the IRQ lines are shared with the
other IRQ sources using AND gates. This means that in order to not cause
any spurious interrupts or miss any interrupts, the IO-APIC must use a
low polarity trigger.
On zork/guybrush/skyrim the eSPI IRQs are currently working as follows:
* On power on/resume the eSPI controller drives IRQ 1 high.
* eSPI controller gets configured to not invert IRQ 1.
* OS configures IO-APIC IRQ 1 as Edge/High.
* EC writes to HIKDO (Keyboard Data Out) which causes the EC to set IRQ1
high.
* eSPI controller receives IRQ 1 high, doesn't invert it, and leaves IRQ
1 as high. This results in missing the first interrupt.
* When the x86 reads from HIKDO, the EC deasserts IRQ1. This causes the
eSPI controller to set IRQ1 to low. We are now primed to catch the
next edge high interrupt. This is generally not a problem since the
linux driver will probe the 8042 with interrupts off.
On S3/S0i3 resume since the eSPI controller comes out of reset driving
the IRQ lines high, we trigger a spurious IRQ since the IO-APIC is
configured to trigger on edge high. This results in the 8042 controller
getting incorrectly marked as a wake trigger.
By configuring the IO-APIC to use low polarity interrupts, we no longer
lose the first interrupt. This also means we can use a level interrupt
to match what the EC actually asserts.
We use the `Interrupt` keyword instead of the `IRQ` keyword in the ACPI
because the linux kernel will ignore the level/polarity parameters
for the `IRQ` keyword and default to `edge/high. `Interrupt` doesn't
have this problem.
The PIC is not currently configured anywhere and it defaults to an
edge/high trigger. We could add some code to configure the PICs trigger
register, but I don't think we need the functionality right now.
For zork and guybrush, this change is a no-op. eSPI is configured in
verstage which is located in RO, and we have already locked RO for
these devices. We will need to figure out how to properly set the
`vw_irq_polarity` for these devices.
BUG=b:218874489, b:160595155, b:184752352, b:157984427, b:238818104
TEST=On zork, guybrush and skyrim
$ suspend_stress_test --post_resume_command 'cat /sys/devices/platform/i8042/serio0/wakeup/wakeup35/active_count'
Verify keyboard works as expected and no interrupt storms are observed.
On morphius I verified keyboard and mouse work on windows as well.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4608a7684e34ebb389e0e55ceba7e7441939afe7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Move GPIO init for SSD_AUX_RESET_L to ensure that eMMC devices
will be initialized in time for the nominal boot flow.
BUG=b:237701972
TEST=Boots to OS
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I610966fd9d31581f15d8bcd51f8a116c27fd6311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66461
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add two memory parts and generate the associated DRAM part ID.
1) Hynix H9JCNNNBK3MLYR-N6E
2) Hynix H58G56AK6BX069
BUG=b:228415394
TEST=none
Change-Id: I0f5ca291e02e209032e2533f4b2d4241b5e62e42
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The generic wifi driver currently contains a lot of intel-specific
functionality that interferes with enabling wake-on-lan. This commit
changes the device tree to use the generic PCIe driver which better
supports this functionality.
BUG=b:237682766
TEST=Booted on skyrim device and verified that wake on LAN works
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I5d15d33fd0a152eb3bf2bfe78e802483a701e750
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65800
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that the speed is limited to 5500 Mbps for all memory parts used in
Skyrim, regenerate the part IDs. Remove any custom generated part IDs
and the associated SPDs.
BUG=b:238074863
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I6d8326208580a971e781887a7ec83355bb085c7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65709
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add fingerprint device and select UART_ACPI driver.
Disable FPMCU until the proper boot segment initializes it.
BUG=b:228271993
BRANCH=NONE
TEST=Can add fingerprints and unlock the device using them.
Signed-off-by: Moises Garcia <moisesgarcia@google.com>
Change-Id: I71e1c7d654395284cdec43bb6e5f581e546da36a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65299
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bhanu Prakash Maiya <bhanumaiya@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The temperature values were taken from guybrush as a starting point for
skyrim.
BUG=b:230428864
TEST=Boot skyrim to OS and verify thermal zones are populated and
working in /sys/class/thermal/
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6669b32f5e3dd63c6523f74166089eb4eb2d7848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With IOMMU disabled, kernel complains that 'IOMMUv2 functionality not
available on this system'. Enable iommu in devicetree for skyrim proto
board in order to allow kernel to load and initialize IOMMUv2.
BUG=b:232750390
TEST=Boot to Chrome OS on skyrim board, and
grep dmesg for "AMD IOMMUv2 loaded and initialized"
Change-Id: I2f10f5eda8083335619a34c44df253b8e5a8572c
Signed-off-by: Jason Glenesk <Jason.Glenesk@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch uses ACPI _PLD macros to add custom values for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A0 | MLB DB |
| |
+----------------+
BUG=b:232298017
TEST=None
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Idca3dd468f1b9fde37a1bbf20d65768032c7160b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add two combination:
1. ALC5682I-VS and ALC1019
2. NAU88L25 and MAX98360
BUG=b:227165780, b:228879074
TEST=emerge-skyrim coreboot chromeos-bootimage
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I36d7b5c4e88825ceaa6922d9e3bed366f55a0d81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-hsuan Hsu <yuhsuan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6c5b3f83b66a2d54611ada3cb97ddda4b655d00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64606
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The HD audio controller of the GPU on bus A device 0 function 1 wasn't
enabled, so it didn't get resources assigned. Enable it to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9a4129ce594c5dd59f70e855fef5f2c04ebb9c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACP device on bus A device 0 function 5 wasn't enabled, so it didn't
get resources assigned. Enable the ACP device to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc9376314213e9d624756519f703d508411cb1bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64553
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The crypro device on bus A device 0 function 2 wasn't enabled, so it
didn't get resources assigned resulting in this the Linux kernel error:
[ 38.582036] pci 0000:04:00.2: attach allowed to drvr ccp [internal device]
[ 38.582064] ccp 0000:04:00.2: enabling device (0000 -> 0002)
[ 38.582175] ccp 0000:04:00.2: ioremap failed
[ 38.582178] ccp 0000:04:00.2: initialization failed
[ 38.582181] ccp: probe of 0000:04:00.2 failed with error -12
Enable the crypto device to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia812df6e59f3767dcbaa908fa620b62619590f85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64552
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix descriptors for USB ports to align with their function and
placement with respect to the schematics.
BUG=N/A
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: If57bebf9bffd4616c437ec655b64cab3298ac08e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enable MKBP (Matrix Keyboard Protocol) interface for all skyrim family
to use for buttons and switches. Disable TBMC (Tablet Mode Switch
device), as it is not needed anymore.
BUG=b:230682161
TEST=manual test on Skyrim:
Volume Up/Down and Power buttons, Tablet Mode switch
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I79ee2fdbb325491c9e3df5b9cff0c0c1181a7001
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Add Fibcom FM101-GL USB WWAN configuration with the required power
sequence as suggested in Fibocom FM101-GL Hardware Guide V1.0.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the WWAN module is
enumerated in the output of lsusb.
localhost ~ # lsusb
Bus 004 Device 003: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I39f8e7204e31d9a4d093aacd838a18e6d2f44970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64004
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In Skyrim, USB-A port and WWAN modules are connected to the SoC USB
ports through an external hub. Update the USB configuration in the
devicetree accordingly. Enable the ACPI driver for external USB hub.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the hub and USB-A ports
are enumerated correctly in the output of lusub command.
Change-Id: Ibf6a3da8add7361fc50adcf7c62e46df234685dc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63586
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix power sequence according to datasheet:GL9750S-OIY04 rev1.24.
BUG=b:229181624
TEST=Build and boot to OS in Skyrim. Ensure that the SD Controller
and SD Card are enumerated fine.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: Iea729d43d10a3f8353b4fe540146d00975f4d422
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Set native function (SD_AUX_RESET_L), and drive it high.
BUG=b:229181624
TEST=Build and boot to OS in Skyrim. Ensure that the SD Controller
and SD Card are enumerated fine.
02:00.0 SD Host controller: Genesys Logic, Inc GL9750 (rev 01)
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I03d88d90acc03cdebcb1e83ed2e799dda8b5b735
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
We need to include the SMM handler to enable SCI events when ACPI is
enabled.
With this enabled we now see we have EC timeout problems while in SMI:
[SPEW ] SMI# #1
[WARN ] SMIx88 => 0x800
[DEBUG] Chrome EC: Set SMI mask to 0x0000000000000000
[DEBUG] Chrome EC: UHEPI supported
[ERROR] Timeout waiting for EC QUERY_EVENT!
[DEBUG] Clearing pending EC events. Error code EC_RES_UNAVAILABLE(9) is expected.
[ERROR] EC returned error result code 1
[DEBUG] Chrome EC: Set SCI mask to 0x00000000186601fb
We still need to debug that. I suspect we have problems reading from
the ACPI IO decodes 0x62 or 0x66.
BUG=none
TEST=Verify SMI handler runs
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ida0fcd634e620274e124a8669836f3974e0a2bf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
* Use GPE 24 since it doesn't conflict with any existing GEVENTS.
* Remove IRQ 12 mapping since it's not used.
* Unmask IRQ1 in PM registers.
* Use the new SMITYPE_ESPI_SCI_B SCI.
BUG=b:227282870
TEST=Build and boot to OS in Skyrim.
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7e9816d67500365ed1d2ee39ef184a1f60321ca1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add various verstage init functions to prepare for enable PSP verstage.
BUG=None
TEST=Build Skyrim BIOS image with PSP verstage enabled.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0d0dba05d4d083e2c6860078676e59cf8f487c87
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enable pen garage. Pen detect is active low.
BUG=b:229168203
TEST:Build and boot to OS in skyrim. Evtest work as expected
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 15 (SW_PEN_INSERTED) state 1
Properties:
Testing ... (interrupt to exit)
Event: time 1649922170.578779, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Event: time 1649922170.578779, -------------- SYN_REPORT ------------
Event: time 1649922172.070740, type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I3bb07af6aebdc355a73148d8be79b1014147f61d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add Goodix touchscreen according to the Programming Guide Rev.0.7
BUG=b:228907558
TEST=local build and tested with Goodix touch screen
Change-Id: I35dd3ca76e9e0f17508bef46c90b53b4be5d0033
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63573
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory parts and generate the associated DRAM part ID.
Also for MT62F2G32D8DR-031 WT:B memory part, add a custom SPD that
configures the DRAM speed at 5500 MHz. Use this custom SPD until that
part can operate at full speed (i.e. 6400 MHz).
BUG=None
TEST=Build Skyrim.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Id87e79f5d6187d57d74487841c09aa309f1450b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Setting the clock source depends on clock request pin for WLAN/SD/SSD
device. Also turn off the unused (CLKREQ#3) clock sources.In skyrim,
clock source 0/1/2 are routed for WLAN/SD/SSD device.
BUG=b:227297986
BRANCH=none
TEST=Build
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I21fb912b69f59717eb4e84c379f706a0257a9ed1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
* Use dedicated ALERT pin to resolve NO_RESPONSE error/status while
getting target configuration.
* Configure the ESPI to operate at 16 MHZ since operating at 33 MHz
causes boot stall.
BUG=b:226635441
TEST=Build and Boot to OS in Skyrim. Ensure that EC <-> AP communication
is working fine through Host Command debug logs in EC console, ectool
version command.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I951afdada8ee4f917cdeba8e287e5a2ae77c97ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63286
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for ELAN trackpad on I2C0 bus.
BUG=None
TEST=Build and boot to OS in Skyrim. Perform evtest on Elan trackpad.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Ia1522af3f35ef131dda74c4aabecc4fa532dfbec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will setup the eSPI GPIOs in bootblock right before eSPI init.
BUG=b:226635441
TEST=build skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6ff32bf840aa4b757e98d876cbd4e2ba15a760da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The eSPI CS function only exists on AGPIO30.
We will need to rework all boards to make eSPI function.
I also fixed the comments on the other eSPI pins.
BUG=b:226635441
TEST=Build skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib03c0a7dcad31d10dd4bad0d10a0184ab84aef9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add Skyrim DXIO descriptors using info from AMD and skyrim bouard
shematics.
BUG=b:225179599
TEST=Boots to OS on Skyrim Board
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ib68cf3d64641b006e0f2c4805af22b44a505a0d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Backlight GPIO was set to HIGH, when it should have been set LOW to
enable the backlight in the embedded display.
BUG=b:224618411
TEST=load on Skyrim proto1, observe backlight
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ife3335ca5a3c2517a6817fccf0544e5fcacb1f9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63003
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Right now, the PSPP policy that controls if the PCIe lanes can be
dynamically downgraded to a lower speed to save some power needs to be
disabled in order for the link training to be successful. Once this
feature is working, PSPP will be reenabled.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ea602596acb8e5ea92076386e80102c3bc757af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Needed so i2c communication works.
BUG=b:224618411
TEST=build skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8ec7c18cae509b5683cb73153fd6d3747cf9d753
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62874
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will fix:
> [INFO ] Probing TPM I2C: tis_plat_irq_status() not implemented, wasting 20ms to wait on Cr50!
BUG=b:224618411
TEST=Compile skyrim
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5add694506ad089adcc8961f101bf507bc39a522
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62873
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The one USB2 port on the XHCI2 controller should have the port ID 2.0,
since it's the first USB2 port on that XHCI controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a370132960939bccec4eb69a6590d0880b04137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62713
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used
for WLAN. Mappping derived from Skyrim schematic.
BUG=b:214412172
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I16e35b443f741d366589fefb7fd21863369d1ec2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
GPIO 32 was not allocated correctly, updating to reflect the native
function use of the pin
BUG=b:214412172
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idadd2a802b3244eba8ee83f80d8f10baebe4ca40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62717
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214415048
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ia6bb3f717b3d30fe5f166dfc958024e931a070c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:214414301
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I6b12950843f3ee3b5abe4ef9c6bd5aba528cc4ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Configure D2 I2C and Interrupt GPIOs during the early initialization.
Add devicetree configuration for D2 device and enable the required
config items.
BUG=b:214414776
TEST=Build
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I57b6d0e9da9935596e54b8eab400440e518b4523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:214413613
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: If1177dda705738222ce7f6f42dceafb14d37c98c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add I2C peripheral reset configuration required during early init.
Enabled I2C generic and HID drivers.
BUG=b:214414677
TEST=Build
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I06e564cf6eca844101d70ff865f3074b45a55d55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:214414851
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ic427f88fee7739b064a8836e07841c80c99212a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The USB port configuration was derived from the PPR and schematics.
This board has 6(some multi-purpose) ports.
Primary functions are:
2 USB-C ports
1 USB SS+ type A port
2 Cameras
1 Bluetooth transceiver
BUG=b:214413631
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ie1b05f190f25dca1566e1023011cc70c2d32f461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:214413631
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I9ca2c16d97e064b32400356e1de37f3f70155a07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62152
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214416935
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Icc71b114bf9d8f70ae38a876eedc9d1c3c02169c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:214414501
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I053909ab73c1aa053f35a505b37571ff23adde89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:214415048
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ida8d226f84726f2eb03b07618907b0ce3928bec5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62146
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214415408
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Icc52182294bb3402463a0a70a5c67779c60dfe32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62045
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214413613
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I15c7c482c4a5ddef22a221794b9ef03f9b7ffe05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62046
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214414033
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I034ab8a06842bee12060103b4a1bc4e3db69e42a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add GPIO initialization and ACPI generation for tables
BUG=b:214415303
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I8f9c7d3f2fdbd5d791032637dbf97c18864ee9e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62044
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214415401
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I60b3b3cd50eea1253df2ae3e0aea83bb89e54702
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62042
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:214415401
TEST=builds
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ieeda9aa0c18b5befea67d2849bd4114da0c348a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62041
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skyrim is a new Google mainboard with AMD Sabrina SOC.
BUG=b:214413553
TEST=util/abuild/abuild -t GOOGLE_SKYRIM --clean
Change-Id: I008fea4aa163b8aa66e86735b29b3fdc4e08a327
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
