summaryrefslogtreecommitdiff
path: root/src/mainboard/google/rex
AgeCommit message (Collapse)Author
2023-06-06mb/google/rex/var/rex0: probe for i2c1 touchscreenEran Mitrani
Touchscreen may either use I2C1 or SPI0. FW_CONFIG.TOUCHSCREEN is set to determine which is used. This CL adds a probe to enable I2C1. BUG=b:278783755 TEST=Tested on rex, confimed i2c1 is disabled when TOUCHSCREEN != TOUCHSCREEN_I2C Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I0bee176298fddd2aee35cf084db037a3ce7672f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-04mb/google/rex: add macro for touchscreen IRQEran Mitrani
BUG=b:278783755 Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I2a6de778c7ab30a9946e100cb70c092ba98496e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74944 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/rex: Enable ISH supportBernardo Perez Priego
Enable ISH based on FW_CONFIG obtained from EC CBI. This is useful in case device is a tablet and motion sensors are handled by ISH instead of EC. BUG=b:280329972,b:283023296 TEST= Set bit 21 of FW_CONFIG with CBI Boot rex board Check that ISH is enabled and loaded Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ibe0e1b8ce2c9b08ac6b1e6fef9bd19afc9b4f59f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75039 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/rex,screebo: Update GPIO PAD IO Standby StateBora Guvendik
Fix for the "Onboard Keyboard and Type-C ports are not working after resuming from powerd_dbus_suspend" issue. This issue was caused since FSP 3165 FSP was fixed and started skipping GpioConfigureIoStandbyState programming when GpioOverride UPD is enabled. This patch moves the IO Standby State programming that FSP was doing to coreboot. BUG=b:284264580 TEST=Boot to OS, compare gpio pins, verify keyboard / Type-C Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: If96c1e71fdde784a55fe079875915ffa5a4f548a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75555 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-04mb/google/rex/var/screebo: Add devicetree for support audioRui Zhou
Add devicetree config for ALC1019_ALC5682I_I2S BUG=b:278169268 TEST=emerge-rex coreboot and verified on screebo Change-Id: I2814cc76aff43daf0353cfef41592591bbe3d213 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-04mb/google/rex: Select SOC_INTEL_METEORLAKE_U_PSubrata Banik
Google/Rex is built with Intel Meteor Lake-U SoC, so select it. Currently, there is no functional difference, but in the future FSP UPD parameters can be overridden properly. BUG=b:276697173 TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4c233e0a8ce58998dc1a0379662e386f9b3d0073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75612 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-03mb/google/rex: Create karis variantTyler Wang
Create the karis variant of the rex0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:285195072 TEST=util/abuild/abuild -p none -t google/rex -x -a make sure the build includes GOOGLE_KARIS Change-Id: I16d8b43390401789b87a6233238e37f32a17b46b Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-02mb/google/rex/variants/screebo: add FW_CONFIG for audio/DBSimon Zhou
This patch adds FW_CONFIG to accommodate different Screebo BOM components across various SKUs. 1. DB_CONFIG for DB_TPEC/DB_TBT/DB_UNKOWN 2. AUDIO for ALC1019_ALC5682I_I2S/AUDIO_UNKNOWN BUG=b:278169268 TEST=build pass Change-Id: I928aae61d4936509a7b68f4041c0cd72f298e83d Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Mac Chiang <mac.chiang@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-31mb/google/rex/var/screebo: Add MIPI camera devicejason.z.chen
Enabling MIPI UCAM for screebo project BUG=b:277883010 TEST=none Signed-off-by: jason.z.chen <jason.z.chen@intel.corp-partner.google.com> Change-Id: Id06e5c162d911a4bd78190757c25e7f760160a8f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-31mb/google/rex/var/screebo: Set TCC to 90°CWentao Qin
Set tcc_offset value to 20 in devicetree for Thermal Control Circuit (TCC) activation feature for proto phase. BUG=b:282865187 BRANCH=None TEST=Build FW and test on Screebo board Change-Id: I3a929aa20a700376d2a0a150911fed34e67f78eb Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75360 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/rex: Move I2S config from common to boardKapil Porwal
Move I2S config from common to board. BUG=none TEST=Build google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I51ca902e9b0077d5d5cc9c3507d26301a0f61bc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75513 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-31mb/google/rex: Enable SoundWire codecsKapil Porwal
Enable drivers for SoundWire codecs and define the topology in the devicetree for the rex0 variant with the SoundWire daughter board connected. +------------------+ +--------------------+ | | | Headphone Codec | | Intel Meteor Lake| +--->|Cirrus Logic CS42L42| | SoundWire | | | ID 0 | | Controller | | +--------------------+ | | | | Link 0 +----+ +-------------------+ | | | Left Speaker Amp | | Link 1 | +--->| Maxim MAX98363 | | | | | ID 0 | | Link 2 +----| +-------------------+ | | | | Link 3 | | +-------------------+ | | | | Right Speaker Amp | +------------------+ +--->| Maxim MAX98363 | | ID 1 | +-------------------+ This was tested by booting the firmware and dumping the SSDT table to ensure that all SoundWire ACPI devices are created as expected with the properties that are defined in coreboot under \_SB.PCI0: HDAS - Intel Meteor Lake HDA PCI device HDAS.SNDW - Intel Meteor Lake SoundWire Controller HDAS.SNDW.SW00 - Cirrus Logic CS42L42 - Headphone Codec HDAS.SNDW.SW20 - Maxim MAX98363 - Left Speaker Amp HDAS.SNDW.SW21 - Maxim MAX98363 - Right Speaker Amp BUG=b:269497731 TEST=Verified SSDT for SNDW in the OS. Playback and recording are also validated on google/rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I3e11dc642ff686ba7da23ed76332f7f10e60fade Reviewed-on: https://review.coreboot.org/c/coreboot/+/73280 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-29mb/google/rex: Update GPIO PAD as per Proto 2 schematicsSubrata Banik
BUG=b:283477280 TEST=Able to build and boot google/rex as per Proto 2 schematics dated 05/16. +-----------------+------------------------------------+---------------------------+--------+ | GPIO | In Proto 1 | In Proto 2 | Impact | +-----------------+------------------------------------+---------------------------+--------+ | GPP_C01 | SOC_TCHSCR_RST_L | SOC_TCHSCR_RST_R_L | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_D19 | NC | EC_SOC_REC_SWITCH_ODL | Y | +-----------------+------------------------------------+---------------------------+--------+ | GPP_E04 | HPS_INT_L | SOC_PEN_DETECT | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_E17 | EN_HPS_PWR | EN_PP3300_SPARE_X | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_F13 | GSPI1_SOC_MISO | GSPI1_SOC_MISO_R | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_F21 | GPIO_F21_SPI_CS_L | SPI_SOC_CS_UWB_L_STRAP | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_H00 | GPIO_H00_SPI_CLK_R | SPI_SOC_CLK_UWB_STRAP_R | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_H01 | GPIO_H01_SPI_MOSI_R | SPI_SOC_DO_UWB_DI_STRAP_R | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_H02 | GPIO_H02_SPI_MISO | SPI_SOC_DI_UWB_DO_STRAP | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S00 | UNNAMED_8_METEORLAKEU_I137_GPPS00 | SDW_HP_CLK_WLAN_PCM_CLK | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S01 | UNNAMED_8_METEORLAKEU_I137_GPPS01 | SDW_HP_DATA_WLAN_PCM_SYNC | N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S02 | UNNAMED_8_METEORLAKEU_I137_GPPS02 | DMIC_SOC_CLK0_WLAN_PCM_OUT| N | +-----------------+------------------------------------+---------------------------+--------+ | GPP_S03 | UNNAMED_8_METEORLAKEU_I137_GPPS03 | DMIC_SOC_DATA0_WLAN_PCM_IN| N | +-----------------+------------------------------------+---------------------------+--------+ Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a8c43b0f845d3446188b7c926e482f91e5b45aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/75407 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-27mb/google/rex: Update FMD to incorporate ISH firmwareSubrata Banik
This patch adds two new chromeos_*.fmd files for release and debug FSP builds targeting rex_ec_ish. `rex_ec_ish` variant would pack ISH firmware into the CSE boot partition hence, the blob size is expected to increase. Creates separate flash map layout to ensure ISH work is not impacting on the regular `rex0` project SPI flash usage. BUG=b:284254353 TEST=Able to build google/rex_ish_ec board and boot on target hardware. Change-Id: Ife4663d3ccf80a928646eadaac4c9ab49ad29055 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75471 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-27mb/google/rex: Create variant to support ISH enablementSubrata Banik
This patch creates a new variant to support the ISH enablement using Rex platform.The idea here is to leverage the `rex0` code as much as possible and add specific support for ISH enablement as per the hardware schematic differences. BUG=b:284254353 TEST=Able to build google/rex_ish_ec board and boot on target hardware. Change-Id: I625fd0b31aed998f4e8f2d139827bc212ee8a90b Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75470 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-26mb/google/rex/variants/baseboard/rex: Add CPU power limit valuesSumeet Pawnikar
Add support of variant_devtree_update() function to override devtree settings for variant boards. Also, add CPU power limit values for rex baseboard. BRANCH=None BUG=b:270664854 TEST=Built and verified power limit values as below log message for 15W SKU on Rex board. Overriding power limits PL1 (mW) (10000, 15000) PL2 (mW) (57000, 57000) PL4 (W) (114) Change-Id: If46445157358e3e0f227e26a35b4303fc9189a4b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Harsha B R <harsha.b.r@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-26mb/google/rex: Set frequency and gears for SaGv pointsBora Guvendik
Restrict memory speed to 6400 MTS as per board design. BUG=b:282164577 TEST=Verified the settings on google/rex using debug FSP logs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I3dec383c7c585b80a73089f3403011c5cda61f65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-26mb/google/rex/var/screebo: Enable touchpadZhongtian Wu
Enable touchpad for Google Screebo. BUG=b:278160238 BRANCH=none TEST=Build and boot to Google Screebo. Verify touchpad works. Change-Id: Ib83e5ef5ca497592f5a26aa1e85d793d06d9dd7f Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75412 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-25mb/google/rex: Enable SaGvSubrata Banik
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be able to train memory (DIMM) at different frequencies. On all latest Intel based platforms SaGv is expected to be enabled to support dynamic switching of memory operating frequency. BUG=b:267879107 TEST=Able to verify SaGv is enabled with 3 work point (0, 1 and 2) and MRC retraining takes around ~20ms extra compared to SaGv being disabled. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic680bfeab4dd285c0d3916ba5e917cc12bae3284 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73534 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-24mb/google/Screebo: Enable AUX DC biasing on C0Simon Zhou
SKU1A C0 has no redriver, so enable SBU muxing in the SoC. BUG=b:283044004 BRANCH=none TEST=Voltages are correct on the C0 and C1 AUX bias pins Change-Id: I18b4ade2c60c270855fb2e733a9201539e08d8ba Signed-off-by: mike <mike5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-24mb/google/rex/var/screebo: Add BT devicetree configqinwentao
Enabling BT for screebo project BUG=b:278169273 TEST=Check whether BT can connect to Bluetooth device Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com> Change-Id: I0ecd62abfbe751e1036948b1490844e7e63d7f0d Signed-off-by: qinwentao <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75352 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-23mb/google/rex: Add FW_CONFIG and device for VPUEran Mitrani
BUG=b:282912666 TEST=set and unset bit20 in HW_CONFIG and check if VPU(0b.0) is enabled when bit20 is set, and disabled when cleared Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: Iee6a9026a4d210407350bfb7ecc8a058e7ff5c24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-23mb/google/rex: Add FW_CONFIG for TOUCH over SPIEran Mitrani
TEST=set the corresponding cbi bit, and saw SPI0 under sysfs BUG=b:278783755 Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I7099cde14cff90ad63e9164769f9913a8284a805 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-22mb/google/rex/var/screebo: enable fingerprintSimon Zhou
BUG=b:278156430 TEST=verify the fingerprint on screebo Change-Id: I986e470b28145f7b17427e794055929a4283c721 Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75287 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-19mb/google/rex: Enable stylus supportDinesh Gehlot
This patch enables stylus support by configuring the "GPP_D08" irqs for rex SoC. This allows the SoC to detect a stylus device, when in use. However stylus is not a wake up source for the rex. BUG=b:282256460 Test=Stylus is detected on proto1 device. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: I84a71aa664698e105b738f8680d0a4751ca1fc72 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-14mb/google/rex: Add variant specific SOC chip config update functionAnil Kumar
This patch adds support for variant specific chip config update similar to commit 061a93f93d2 ("mb/google/brya: Add variant specific soc chip config update"). Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I60a4042cba608fd527527af9340ec0215f3086ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/75046 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-05-14mb/google/rex/var/screebo: Add initial devicetree configKun Liu
add initial devicetree config for screebo BUG=b:276814951 TEST=emerge-rex coreboot Change-Id: Ie64d0e50ec22b3e363597af64eb723ef1f86dfa8 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-14screebo: fix the lp5ccc config from 0x55 to 0xaaSimon Zhou
BUG=b:278022971 TEST=verified on screebo Change-Id: I16f1d66ca7f885120358eb2a2d3c6fb111319f11 Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75173 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-12mb/google/rex: Set WWAN_RF_DISABLE_ODL to NCTarun Tuli
This signal isn't functionally being used and is causing leakage during suspend. Set it to NC. BUG=b:279762779 TEST=builds. WWAN functional. Change-Id: I93f2b0a781e250678280b57e4ab1d80ef27ff460 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-08mb/google/rex/var/rex0: Correct _PLD values for USB C0Won Chung
Denote the correct value of ACPI _PLD for USB ports. The horizontal position of port C0 is incorrectly labelled. +----------------+ | | | Screen | | | +----------------+ C0 | | A0 | | C1 | | +----------------+ BUG=b:216490477 TEST=emerg-rex coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Id9ed435ca0af131e3bb4538701fc97d78146899f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74366 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-06mb/google/rex/var/screebo: Add DDR DQ map configKun Liu
Add DDR DQ map config for screebo BUG=b:276814951,b:272218757 TEST=emerge-rex coreboot Change-Id: I993ae4024689b9cedbea247689a760bd83cd0d45 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74961 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-29mb/google/rex/variants/screebo: Generate RAM IDsKapil Porwal
Generate RAM IDs for - MT62F512M32D2DR-031 WT:B (LP5) H9JCNNNBK3MLYR-N6E (LP5) MT62F1G32D2DS-026 WT:B(LP5x) H58G56BK7BX068 (LP5X) BUG=b:276814951 TEST=Run part_id_gen tool without any errors Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I0fb2e488c06ed74d3fd493e5ca0ab89a825a9349 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74802 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-28mb/google/rex/var/screebo: Add initial setup for gpio configKun Liu
add the initial gpio configuration for screebo initial variant BUG=b:276814951 TEST=emerge-rex coreboot Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Change-Id: Ib96e03f47bc1d6e5628ae459c3e1eb4dc18849c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74475 Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-27mb/google/rex: Add USB4 ANX7452 Rev 2 to USB_DB FW_CONFIGSubrata Banik
This patch adds new USB_DB FW_CONFIG to enable support for USB4 ANX7452 Rev 2. BUG=b:279647370 TEST=Able to build and boot google/rex with Proto 2 SKU Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I878b591e5919d05d3c5fc2eefdeb492e95d4f7b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-22mb/google/rex: Enable asynchronous End-Of-PostSubrata Banik
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post right after PCI enumeration and handle the command response at `BS_PAYLOAD_BOOT'. With these settings we have observed a boot time reduction of about 100ms on google/rex. TEST=Tests on google/rex with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show End-Of-Post after PCI initialization and EOP message received at `BS_PAYLOAD_BOOT'. Change-Id: I27b540eeddcada521eba91fcc51504831d6dc855 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-17Makefiles: Drop redundant VARIANT_DIR definitionsKyösti Mälkki
Change-Id: Ie75ce1eee3179a623da812a6b76c7ec457684177 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-04-17mb/google/rex: Enable all DDI lanesAnil Kumar
This patch enables all DDI ports on Rex board to support display port tunneling and dual display on TBT dock. BUG=b:273901499 TEST=Boot google/rex and connect two displays over a TBT dock and check the display functionality. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I45ee5334fbb877bd58912c8d24920037f155dc42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74413 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-16mb/google/rex: Create screebo variantSimon Zhou
Create the screebo variant of the rex0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:276814951 BRANCH=None TEST=util/abuild/abuild -p none -t google/rex -x -a make sure the build includes GOOGLE_SCREEBO Change-Id: I8d05ca7c0fe596378ca15d0734d46ad1dc63a1f9 Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74391 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-12mb/google/rex: remove weak from cros gpioEric Lai
No need for variant to use _weak. BUG=b:276818954 TEST=new_variant_fulltest.sh rex0 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I7ad904e06e5d83edf4bc11cafd5060ca409bd4ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/74294 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-04-11mb/google/rex: Add DTT thermal settings for thermal controlSumeet Pawnikar
Add DTT thermal settings for thermal control provided by thermal team for rex0 board BRANCH=None BUG=b:262498724, b:270664854 TEST=Built and verified thermal entries in ACPI SSDT on Rex board Change-Id: I00dd97b759c8c68edaeeb4d64422b83c5e86981d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-11mb/google/rex: Update Debug Flash Layout to fit WP_RO within 4MBSubrata Banik
This patch updates the Rex debug flash layout to optimize WP_RO to 4MB. Changes for chromeos.fmd: SI_BIOS: RW_SECTION_A/B: Increase to 7.5MB. RW_LEGACY: Introduce with 1MB. RW_MISC: Increased to 1MB. RW_UNUSED: 2MB (reserved) WP_RO: Reduce to 4MB Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the SPI Flash. BUG=b:277143384 TEST=Able to build and boot google/rex with FSP release and debug image. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4ab69eb24937d58c8bc5d3c0a6e5cb70b843a1ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/74253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-11mb/google/rex: Update Flash Layout to fit WP_RO within 4MBSubrata Banik
This patch updates the Rex flash layout to optimize WP_RO to 4MB. The idea is to create more space inside FW_RW_A/B to accommodate multiple blobs to boot google/rex with different Intel MTL SoC stepping. Changes for chromeos.fmd: SI_BIOS: RW_SECTION_A/B: Reduce to 7MB. RW_LEGACY: Reduce to 1MB. RW_MISC: Increased to 1MB. RW_UNUSED: 3MB (reserved) WP_RO: Reduce to 4MB Additionally, ensure RW_SECTION_B region starts at 16MB boundary in the SPI Flash. BUG=b:277143384 TEST=Able to build and boot google/rex with FSP release and debug image. Change-Id: Iccf83b7bb66d0d5503e0ff9e9a819051296c6724 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74229 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-04mb/google/rex: Enable CSE pre-cpu timestampsBora Guvendik
Enables pre-cpu boot timestamps from cse. 990:CSME ROM started execution 0 944:CSE sent 'Boot Stall Done' to PMC 47,000 945:CSE started to handle ICC configuration 225,000 (178,000) 946:CSE sent 'Host BIOS Prep Done' to PMC 225,000 (0) 947:CSE received 'CPU Reset Done Ack sent' from PMC 516,000 (291,000) 991:Die Management Unit (DMU) load completed 587,000 (71,000) 0:1st timestamp 597,427 (10,427) BUG=b:259366109 TEST=Boot on rex, check "cbmem -t" Change-Id: I68cd53c18af6a400bcd9dc15d428a904b0647495 Signed-off-by: Bora Guvendik <bora.guvendik@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73759 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-03mb/google/rex: Use FW_CONFIG for generating ACPI code for WIFISubrata Banik
This patch avoids creating runtime ACPI for unused WIFI solutions. For example: if the Rex SKU is with WIFI_CNVI then you don't need to populate ACPI code for WIFI_PCIE. FW_CONIG can be used for making those decisions. TEST=No ASL entries being created for WIFI_PCIE if the FW_CONIG is set to WIFI_CNVI. Also, helped to save the boot time on google/rex (FSP-S API) by 9ms. Change-Id: I60e4332d8d8c360fdf425b30513ff79209979e85 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74147 Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-01mb/google/rex: Add FW_CONFIG for FP/UWB/WIFISubrata Banik
This patch adds FW_CONFIG to accommodate different Rex BoM components across various SKUs. 1. Fingerprint sensor - FP Present/Absent 2. Ultra wideband - UWB Absent/Using BITBANG/Using GSPI1 3. WIFI - CNVi/PCIe TEST=Able to build and boot google/rex. Change-Id: I97b0dc25f239103a0a235f14b50008a633e2f88d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com>
2023-04-01mb/google/rex: Update Rex Flash LayoutSubrata Banik
This patch updates the Rex flash layout to allow CSE Lite FW update and accommodate multiple ESx SoC stepping blobs. For default chromeos.fmd SI_BIOS: RW_SECTION_A/B: Increased by ~1.9MB. RW_LEGACY: Reduce to 1MB. RW_MISC: Reduce to 152KB. - Drop RW_SPD_CACHE - Optimize other sections Additionally, moved RW_LEGACY under extended BIOS region. For chromeos-debug-fsp.fmd SI_BIOS: RW_SECTION_A/B: Increased by ~1.2MB. RW_LEGACY: Dropped RW_MISC: Reduce to 152KB. - Drop RW_SPD_CACHE - Optimize other sections BUG=b:262868089 TEST=Able to enable CSE update on google/rex and have free space to add one more PUNIT FW for support different SoC stepping. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6146b36c4ce2c0141277eeb906d6ad1f503f3c78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-01mb/google/rex: Add fmd for debug FSPSubrata Banik
Debug FSP is ~920KiB larger than release FSP and we don't have sufficient space for rex flash layout. Remove RW_LEGACY and split them into RW_SECTION_A/B so we can have a room for it. Note: This fmd will only used for internal testing/debugging and not for the firmware in released devices. BUG=b:262868089 TEST=Build google/rex with CONFIG_BUILDING_WITH_DEBUG_FSP. Change-Id: I58b0af9c43c5d096dc80084497b39f13f67c25cd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-30Revert "mb/google/rex: Enable VPU"Kapil Porwal
This reverts commit 555ceca38a78 ("mb/google/rex: Enable VPU"). Reason: Unable to boot to latest OS image with VPU enabled. BUG=none TEST=Boot to OS image 15376 on google/rex Change-Id: If61282528922304373d492b362056b52995cbcad Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paz Zcharya <pazz@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-03-29mb/google/rex/Kconfig: Add SMBIOS mainboard version flagJay Patel
Add GOOGLE_SMBIOS_MAINBOARD_VERSION flag for rex board. BUG=None TEST=Verfied board ID for rex using "crossystem" command, giving the output as 1. Without CL: localhost ~ # crossystem arch = x86 # [RO/str] Platform architecture backup_nvram_request = 1 # [RW/int] Backup the nvram somewh battery_cutoff_request = 0 # [RW/int] Cut off battery and shu block_devmode = 0 # [RW/int] Block all use of develo board_id = (error) # [RO/int] Board hardware revision clear_tpm_owner_done = 0 # [RW/int] Clear TPM owner done With CL: localhost ~ # crossystem arch = x86 # [RO/str] Platform architecture backup_nvram_request = 1 # [RW/int] Backup the nvram somewh battery_cutoff_request = 0 # [RW/int] Cut off battery and shu block_devmode = 0 # [RW/int] Block all use of develo board_id = 1 # [RO/int] Board hardware revision clear_tpm_owner_done = 0 # [RW/int] Clear TPM owner done Signed-off-by: Jay Patel <jay2.patel@intel.com> Change-Id: I644ed7a948f0094a0be080153d83eaa2e37b8f1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/74037 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-25mb/google/rex: Use HI-556W for Proto 1 SKUsSubrata Banik
This patch drops the UFC sensor OV2740 (reused from the Brya chassis) support for Rex and added support for Rex specific UFC sensor HI-556W. BUG=b:269499723 TEST=Verified UFC is working on google/rex Proto 1. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6b8ac08adec351a103ac1764d974db4881dc4d6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/70225 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-03-20mb/google/rex: Enable USB camera powerIvy Jian
Add enable_gpio for USB power resource BUG=b:273891168 TEST=Able to detect USB CAM Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I08ebe560c8b75c8b590c889b7b90dbe678318d2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-19mb/google/rex: Move BOARD_GOOGLE_BASEBOARD_REX to Kconfig.nameEric Lai
Align project style with other chrome projects. TEST=built FW not changed Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Icfd1d274216d387cab6feb68afa49fc63c8c52e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-19mb/google/rex: Add DRIVERS_GENESYSLOGIC_GL9755Eric Lai
Rex uses GL9755 and miss select the driver. BUG=b:273906526 TEST=SD card is functional. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I674b052689c80873e8a3b295d15788f3a93f0b82 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-15mb/google/rex: Add Hayden Bridge (HB) to USB_DB FW_CONFIGSubrata Banik
This patch increases FW_CONFIG for USB_DB to 3-bits. BUG=b:273346973 TEST=Able to build and boot google/rex with Proto 2 SKU Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib07ba1d54e7f7e2b09a99438529e503d9c9edb7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-15mb/google/rex: Configure _DSC for camera devicesJamie Ryu
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:268607999 TEST=Build and boot rex proto1 to OS and verify privacy LED behavior. Change-Id: Ife849f7407b02867ddb992d7eebb08b0b44aecc8 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-08mb/google/rex: Rename touchscreen signals as per latest Rex schematicsEran Mitrani
Touchscreen signals were renamed for Rex schematics dated 21st Dec'22. This CL fixes the comments for those signals. BUG=b:263411413 TEST=None required (changed comments only) Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: Ic40ef943d199d9f4a2bec9c0e6d4820224ef6adc Reviewed-on: https://review.coreboot.org/c/coreboot/+/71795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-02mb/google/rex: Enable VPURavi Sarawadi
BUG=b:270529665 TEST=Verify the build and boot on Rex board Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Change-Id: I0e3d3312c546a2a468fb906a08b8d3ec3e96c46a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-02mb/google/rex: Generate LP5 RAM ID for `K3KL6L60GM-MGCT`Subrata Banik
Add the support LP5 RAM parts for rex: DRAM Part Name ID to assign K3KL6L60GM-MGCT 3 (0011) BUG=b:270708359 TEST=emerge-rex coreboot Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id0925ccec014c9c535178ed3d908e60889df624d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-02mb/google/rex: Generate LP5 RAM ID for `H58G56BK7BX068`Subrata Banik
Add the support LP5 RAM parts for rex: DRAM Part Name ID to assign H58G56BK7BX068 1 (0001) BUG=b:270708359 TEST=emerge-rex coreboot Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9eea7e277628992be9b7768a678a50425444002a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-02-27mb/google/rex: Remove `fixme` from gpio.hKapil Porwal
Remove `fixme` from gpio.h since it has been addressed. BUG=none TEST=Only a cosmetic change Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I79a2493dba6becd4b8c1ebf37e452a5a173eb396 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-02-23mb/google/rex: Set audio GPIOs based on fw_configKapil Porwal
Define some actions based on probe results for audio: - Disable the SoundWire GPIOs when I2S option is selected. - Disable the I2S GPIOs when SoundWire option is selected. - Disable all the GPIOs when no audio is enabled. BUG=b:269497731 TEST=Test that GPIOs are configured based on the current value of the fw_config field in cbi. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I0ed452a0d08e6779add318d9bbd1e97b50b6aea9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-23mb/google/rex: Use gpio padbased table overrideKapil Porwal
In order to improve gpio merge mechanism. Change iteration override to padbased table override. And the following patch will change fw config override with ramstage gpio table override. Port of commit 7aef2b1294f2 ("mb/google/nissa: Apply gpio padbased table override") BUG=none TEST=Verify devbeep at depthcharge console Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I2ee86bbec7d25a35d726f29ad79891f1054bf52c Reviewed-on: https://review.coreboot.org/c/coreboot/+/73182 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-22mb/google/*: Resume from suspend on critical batteryIvan Chen
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate when the state of charge drops to low_battery_shutdown_percent. BUG=b:255465618 TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898) Verify system resumes from s0ix and then enter S5 on nivviks with steps: 1. disconnect AC 2. powerd_dbus_suspend --disable_dark_resume=false 3. fakebatt 5 4. fakebatt 4 Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9 Signed-off-by: Ivan Chen <yulunchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-02-16mb/google/rex: Mark unused USB ports as emptySubrata Banik
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Mainboard variants to override the USB ports as per the target board design. TEST=Able to build and boot google/rex with all USB ports are working as expected. Change-Id: Ic3d21151a22f2318413f480f3386bf2dbf696307 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-14mb/google/rex: Set `SkipExtGfxScan` FSP-M UPDSubrata Banik
This patch overrides `SkipExtGfxScan` UPD as the Rex device is equipped with an on-board graphics device hence, skip scanning external GFX devices. BUG=b:228002764 TEST=Able to save ~1ms+ boot time on google/rex. FSP FPDT Data is showing the timestamp between those function calls. Without this patch: [INFO ] CheckOffboardPcieVga/5b7cc220-e183-481c-87f427a92d8db88f -> 979684 -> 22 [INFO ] CheckOffboardPcieVga/5b7cc220-e183-481c-87f427a92d8db88f -> 980815 -> 1131 With this patch: `CheckOffboardPcieVga` is not getting called. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I20aa09e80671ab94e639787f40b95b740bbe5efb Reviewed-on: https://review.coreboot.org/c/coreboot/+/72948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-02-04mb/google/rex: Use OV13B10 sensor for Proto 1 SKUsSubrata Banik
This patch drops the WFC sensor OV8856 (reused from the Brya chassis) support for Rex and added support for Rex specific UFC sensor OV13B10. BUG=b:267264348 TEST=WFC MIPI cameras have been enabled using google/rex Proto 1. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic785b82db4368f40d91921f29c218cf417938541 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70226 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-02-04Revert "UPSTREAM: mb/google/rex: Enable SaGv"Subrata Banik
Enabling `SaGv` along with FSP v2473 is causing blank display issue. Mostly likely we shouldn't enable SaGv yet on Intel MeteorLake. BUG=b:267446159 TEST=Able to see ChromeOS UI in consecutive boot. This reverts commit cbca81c5946384843197c08401c4266f45fef4a2. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ifbcc36515f7550c183c40e5af94684f5c3e39a7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72774 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-03mb/google/rex: update touchscreen report EN pin settingIvy Jian
Removed workaround since the latest schematics fixed. Power Sequencing of ELAN6918 (in ACPI) after this patch `POWER enabled -> RESET deasserted -> Report EN enabled` BUG=b:247029304 TEST=Verified ELAN touch panel is working as expected after booting Google/rex device to ChromeOS. Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I19629262776f7e0cccbdebb2285890d177a8a8a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72725 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-24mb/google/rex: Enable SaGvSubrata Banik
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be able to train memory (DIMM) at different frequencies. On all latest Intel based platforms SaGv is expected to be enabled to support dynamic switching of memory operating frequency. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7cf52b966c1355c1f2bd4ae7c256fa4252a90666 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-01-19intel/meteorlake: remove skip_mbp_hob SOC chip configKapil Porwal
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP. This new option is hooked with `SkipMbpHob` UPD and is always disabled for ChromeOS platforms. This made skip_mbp_hob SOC chip config variable redundant which is also removed as part of this change. BUG=none TEST=Build and boot to Google/Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Iaba1ea29a92a63d2b287e1ccdea1a81ec07b9971 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-15drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flagMatt DeVillier
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the OS driver and ACPI thinking they own the GPIO. This can cause timing problems because it's not clear which system should be controlling the GPIO. Previously, we flagged as an error any device which set the 'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.' There's no reason to require explicit disablement however, so drop the superfluous 'disable' flag, and change the _CRS generation to check if the GPIOs will be exported via the 'has_power_resource' flag instead. BUG=b:265055477 TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only listed under PRx, not under _CRS. Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-07mb/google/rex: Disable stage cacheSubrata Banik
This patch disables the stage cache to save boot time. Note: S3 is not POR for Intel MTL mobile skus. Boot time is reduced by ~8ms. Boot time before: 4:end of romstage 1,391,225 (13,724) 100:start of postcar 1,403,339 (12,114) Boot time after: 4:end of romstage 1,380,262 (5,618) 100:start of postcar 1,392,323 (12,060) Change-Id: I9775fc628f345a514894f30435a374e2ffa057c1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-01-04mb/google/rex: Configure EN_DMIC_SOC_DATA to GPO and LOWSubrata Banik
This patch configures GPP_H15 (EN_DMIC_SOC_DATA) as GPO and put into safe state aka LOW/PD. BUG=b:263411621 TEST=Able to build and boot Google, Rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3d376f895b2f0882c9fa6fe7b98686907bde4321 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71631 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-02mb/google/rex: Update USB2-C1 mappingSubrata Banik
This patch updates the USB2-C1 mapping from USB2 Port 4 to USB2 Port 1 as per latest Rex schematics dated 12/06/2022. TEST=Hardward awaited. Change-Id: Ifc82200e6eafcea7e820a96df81325f3c8849fd1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70426 Reviewed-by: Eran Mitrani <mitrani@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-02mb/google/rex: Remove USB2_8 ConnectionSubrata Banik
DCI interface deprecated for Proto1. USB2_8 port becomes no-connect. BUG=b:263494661 TEST=Able to build and boot Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6f03d600acd8ceaa5a5630fc19c1c7e34a4ea28f Reviewed-on: https://review.coreboot.org/c/coreboot/+/71237 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-02mb/google/rex: Revise config for the Proto 1 buildSubrata Banik
1. Rename DB_USB4 for KB8010 while adding ANX7452 as different DB_USB4 option. 2. Add audio component for Soundwire. 3. Rename MAX98357_ALC5682I_I2S to MAX98360_ALC5682I_I2S. Change-Id: I9f04c644b8a392feb2609f906bc9db945bf5fce2 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70867 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-27mb/google/rex: Enable PMC IPC configSubrata Banik
TEST=Able to build and boot Google/Rex. Device (PMC) { Name (_HID, "INTC1026") // _HID: Hardware ID Name (_DDN, "Intel(R) Meteor Lake IPC Controller") // _DDN: DOS Dev ice Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0B) } ... } Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I28c0153a770b36cde0653ac92d2e5ad1b8dd3449 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71268 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-24mb/google/rex: Enable DPTF functionality for Rexzhaojohn
Enable DPTF functionality for Meteor Lake Rex board. BUG=b:262498724 TEST=Booted to OS and verified DPTF entries in ACPI SSDT on Rex board. Change-Id: I87b2d71650be9ce940d9452bf4a76d4cd1ddba52 Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70884 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-24mb/google/rex: Use GPP_C15 as WWAN_DPR_SAR_ODLSubrata Banik
BUG=b:263413949 TEST=Able to build and boot Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I453fe8e1f4b4b8d4730ade259899d76aec949a44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71231 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-24mb/google/rex: Rename GPP_D07 to FPMCU_UWB_MUX_SELSubrata Banik
BUG=b:263412235 TEST=Able to build and boot Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia444cc8e3666fe15479ece81d068f9e8f1d339ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/71228 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-15mb/google/rex: Add support for WWAN over USB3Subrata Banik
This patch connects USB3_PCH_*_WWAN_* to USB32_2 as per Proto 1 schematics dated 12/14/2022. TEST=Able to build Google/Rex. Change-Id: Ie04c79ff5c231527e3d5f63a5cc553ec39c46914 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-15mb/google/rex: Modify the PIN name as per schematicsSubrata Banik
This patch updates the GPIO PIN name as per Proto 1 schematics dated 12/14/2022. TEST=Not code change, just updated the comment section. Change-Id: Ic076ab35689fd2afb7c18eff065a90b9464a6b1d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-15mb/google/rex: Add RTD3 support for discrete wifi moduleKapil Porwal
BUG=none TEST=Build and boot to the OS on google/rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I2c5bac880e7dbc2ec14376c5cee3c13363bab377 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70444 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-10mb/google/rex: Implement S0ix hooks aka `MS0X` methodSubrata Banik
This patch ensures to be able to drive SYS_SLP_S0IX_L `low` based on the state of the system while `SLP_S0_L` signal is `low` (while the system is in S0ix). Implemented runtime ASL method (MS0X) being called by PEPD device _DSM to configure `SLP_S0_GATE (GPP_H14)` PIN at S0ix entry/exit. Scope (\_SB) { Method (MS0X, 1, Serialized) { If ((Arg0 == One)) { \_SB.PCI0.CTXS (0x75) } Else { \_SB.PCI0.STXS (0x75) } } BUG=b:256807255 TEST=Able to see SYS_SLP_S0IX_L goes low in S0ix. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie6b5e066f228ea5dc79ae14dd803fc283fd248ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/70196 Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-09mb/google/rex: Enable S0ixSubrata Banik
This patch enables S0ix for Google/Rex platform. BUG=b:256807255 TEST=Able to program FADT table Bit 21 (Low Power Idle S0) Change-Id: I79546267d29622c65321f7dfa29d3aac2fa59438 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70430 Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-12-08mb/google/rex: Add MPTS method for WWAN over PCIeSubrata Banik
This patch generates the following for the mainboard: Scope (\_SB) {         Method (MPTS, 1, Serialized)         {             Local0 = \_SB.PCI0.RP06.RTD3._STA ()             If ((Local0 == One))             {                 \_SB.PCI0.RP06.PXSX.DPTS (Arg0)             }         } } Change-Id: I27ade63cfe0586aee9f03ba816b2590f14dcb610 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70229 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-12-03mb/google/rex: Add PCIe based SD controllerSubrata Banik
This patch adds PCIe based SD controller at RP 7 (from RP 11) with Proto 1 schematics dated 11/30. Additionally, added the RTD3 entries for the SD controller. Finally, ensured that EN_PP3300_SD (GPP_D03) is configured in bootblock and SD_PERST_L (GPP_D02) is configured in romstage to meet the power cycle requirement. BUG=b:242917011 TEST=Able to build and boot Google/Rex. SD card detection is due for the Proto 1 hardware. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I23d53e4d61ec36d2145f9e5816d97d13eb5b219e Reviewed-on: https://review.coreboot.org/c/coreboot/+/70064 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-12-03mb/google/rex: Drop `board_id` check while configuring GPIOSubrata Banik
This patch drops the usage of reading `board_id()` while performing the GPIO configuration. The reason to drop the board_id check is to ensure that GPIO configuration for MLB (mainboard) would remain the same and the only GPIO PIN configuration that differs would be due to usage of having different DBs (daughter board) which will be taken care using CBI (and fw_config.c file) in coreboot. Additionally, drop unused early GPIO default configuration table. BUG=b:260804656 TEST=Able to perform the GPIO configuration and able to boot Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I96cafd1c904001cbf4199977e9e721afe5eab470 Reviewed-on: https://review.coreboot.org/c/coreboot/+/70224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-12-03mb/google/rex: Add probed fw_configs to SMBIOS OEM stringsSubrata Banik
Enable this feature, and it can use the probe statement in devicetree to cache of fw_config field as oem string. TEST=With CBI FW_CONFIG field set to 0x1561 localhost ~ # dmidecode -t 11 Getting SMBIOS data from sysfs. SMBIOS 3.0 present. Handle 0x0009, DMI type 11, 5 bytes OEM Strings String 1: AUDIO-MAX98357_ALC5682I_I2S String 2: CELLULAR-CELLULAR_PCIE String 3: UFC-UFC_MIPI String 4: WFC-WFC_MIPI String 5: DB_SD-SD_GL9755S Change-Id: I6cb35eb9c0fbe32764ca76bb7a929cc92fc38404 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70228 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-26mb/google/rex: Disable SATA from the devicetreeKapil Porwal
SATA is not supported on google/rex hence disable it. BUG=none TEST=Build and boot to google/rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I35a742ab9782feed86c3af514505d870d181b34b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69973 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-25{drivers/wifi, mb/google}: Rename `is_untrusted` to `add_acpi_dma_property`Kapil Porwal
`is_untrusted` is eventually ended up by adding DMA property _DSD which is similar to what `add_acpi_dma_property` does for WWAN drivers, hence it makes sense to have a unified name across different device drivers. BUG=b:259716145 TEST=Verified that the _DSD object is still present in the SSDT. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I4e0829a76a193b0a1e1e0f2b7ce2119bb00dd696 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69937 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-24mb/google/rex: Adding cros_gpios to rexIvy Jian
Adding cros_gpios for crossystem to access WP GPIO BUG=b:258048687 TEST= run FAFT firmware_WriteProtect passed. Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: Ieac1df805c6399aefdc13aae136630d496aacd58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69924 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-19mb/google/rex: Enable TCSS DisplayPort detection at prebootzhaojohn
This change enables the DisplayPort detection at preboot for Rex board. BUG=b:247670186 TEST=Built image and validated DisplayPort feature at preboot on Rex. Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5 Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-19ec/google/chromeec: Remove EC_HOST_EVENT_USB_CHARGERCaveh Jalali
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all references. BUG=b:216485035,b:258126464 BRANCH=none TEST=none Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-18mb/google/rex: Disable `ACPI PM timer`Subrata Banik
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that ACPI PM timer remains disabled. The PM timer (by PMC IP) consumes more power and blocks S0ix so the timer is emulated by ucode to save power and unblock S0ix. TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc BIT 1 is set. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-17mb/google/rex: Add `disable_gpio_export_in_crs` for rexSubrata Banik
None of the touchscreens (over I2C) used in the rex program requires exporting GPIOs in the ACPI _CRS method. This can cause i2c devices to malfunction or cause timing sequence violations if ACPI exports a PowerResource for the device that uses GPIOs that are also exported in _CRS. BUG=none TEST=Able to build and boot Google, Rex platform. Without this patch: [ERROR] I2C: 00:10: Exposing GPIOs in Power Resource and _CRS With this patch: None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I578a60eff27f94d6dc94b900604bc7560337d60b Reviewed-on: https://review.coreboot.org/c/coreboot/+/69612 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12mb/google/rex: Add Write Protect GPIO to cros_gpiosIvy Jian
This will enable crossystem to access WP GPIO BUG=b:258048687 TEST= wpsw_cur in crossystem reads the correct gpio Change-Id: I67f4a57025064dbf8c691255b0abae9d3fa0dbd3 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69468 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-09mb/google/rex: Add fingerprint SPIEran Mitrani
Add Fingerprint SPI, and power-off FPMCU during romstage. For reference see CL:66915 for a similar change to Brya's power sequence SHA: 2b523ce6316e5c5ec86fe812d739fe48ca81d83d ("Invoke power cycle of FPMCU on startup") TEST=Tested on Rex - setup and logged in using fingerprint Change-Id: I4e6be24e72a8232ae2c958a01cf8ea9a272d7365 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66992 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-11-04mb/google/rex: Enable RFIM for CNVizhaojohn
This patch enables the radio frequency interference mitigation for Rex. BUG=b:248391777 TEST=Booted to OS on Rex board. Verified RFIM DSM is presented to kernel through ACPI SSDT. Change-Id: I22f9861452c2c222dd7a33bfeb02c63b026bf2f7 Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-04mb/google/rex: Fix fw_config probe for UFC and WFCKapil Porwal
Fix fw_config probe for UFC and WFC. BUG=b:255971791 TEST=Build Google Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I5103e7da04004414d96f42057c105cf9fbf51b25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 11:47:51 +0000