coreboot.git - my copy of coreboot

Age	Commit message (Expand)	Author
2024-01-26	mb/google/rex/var/screebo: Modify TCC_offset to 20	Subrata Banik
2024-01-03	mb/google/rex/var/screebo: Prevent camera LED blinking during boot	Jason Chen
2023-12-23	mb/google/rex/var/screebo: Update DTT settings for thermal control	Kun Liu
2023-12-21	mb/google/rex/var/screebo: Remove Camera EEPROM off timing	Wentao Qin
2023-12-21	mb/google/rex/var/screebo: Configure slew rate to 1/8 for GT domain	Kun Liu
2023-12-20	mb/google/rex/var/screebo: Configure Acoustic noise mitigation	Subrata Banik
2023-12-19	mb/google/rex/var/screebo: Add delay 1ms after Main 3V3	Kun Liu
2023-12-12	mb/google/rex/var/screebo: Increase PL1 max value from 15W to 25W	Kun Liu
2023-11-10	mb/google/rex/var/screebo: Update DFP port	zhourui
2023-10-31	mb/google/rex/var/screebo: Disable FVM	Subrata Banik
2023-10-31	mb/google/rex/var/screebo: Set Baseline Power Limit	Subrata Banik
2023-10-13	Revert "mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hang"	Wentao Qin
2023-10-10	mb/google/rex/var/screebo: Update DTT settings for thermal control	Kun Liu
2023-09-19	mb/google/rex/var/screebo: Change GPP_C06 to NC	Zhongtian Wu
2023-09-16	Revert "mb/google/rex/var/screebo: Reduce TCC from 90°C to 80°C"	Subrata Banik
2023-09-04	mb/google/rex/var/screebo: Set `SAGV_POINTS_0_1_2` to avoid hang	Wentao Qin
2023-09-02	mb/google/rex/var/screebo: add hook for WiFi SAR table	YH Lin
2023-09-02	mb/google/rex/var/screebo: add FP_MCU fw_config	YH Lin
2023-09-02	mb/google/rex/var/screebo: remove SD_ABSENT	YH Lin
2023-08-18	mb/google/rex/var/screebo: Update DTT settings for thermal control	Kun Liu
2023-08-08	mb/google/rex/var/screebo: Change sdcard clk from 7 to 6	Kun Liu
2023-08-04	mb/google/rex/var/screebo: Add fw_config probe for GL9750 and RTS5227S	Kun Liu
2023-08-01	mb/google/rex/var/screebo: Enable RTD3 for SSD	Kapil Porwal
2023-08-01	mb/google/rex/var/screebo: Restrict ASPM to L1 for SD controller	Kapil Porwal
2023-07-22	mb/google/rex/var/screebo: Reduce TCC from 90°C to 80°C	Subrata Banik
2023-07-17	mb/google/rex/var/screebo: Update I2C timing	Zhongtian Wu
2023-07-17	mb/google/rex/var/screebo: Update touchscreen GPIO	Zhongtian Wu
2023-07-05	soc/intel/meteorlake: Set TCC to 90°C	Sumeet Pawnikar
2023-07-05	mb/google/rex/var/screebo: Update touchpad I2C timing	Zhongtian Wu
2023-07-05	mb/google/rex/var/screebo: Update touchscreen I2C timing	Zhongtian Wu
2023-06-20	mb/google/rex/var/screebo: Remove rp2 and add rp1/rp3	Rui Zhou
2023-06-17	soc/intel/meteorlake: Update tcss_usb3 alias	Eric Lai
2023-06-12	mb/google/rex/var/screebo: Enable touchscreen	Zhongtian Wu
2023-06-04	mb/google/rex/var/screebo: Add devicetree for support audio	Rui Zhou
2023-06-02	mb/google/rex/variants/screebo: add FW_CONFIG for audio/DB	Simon Zhou
2023-05-31	mb/google/rex/var/screebo: Add MIPI camera device	jason.z.chen
2023-05-31	mb/google/rex/var/screebo: Set TCC to 90°C	Wentao Qin
2023-05-26	mb/google/rex/var/screebo: Enable touchpad	Zhongtian Wu
2023-05-24	mb/google/Screebo: Enable AUX DC biasing on C0	Simon Zhou
2023-05-24	mb/google/rex/var/screebo: Add BT devicetree config	qinwentao
2023-05-22	mb/google/rex/var/screebo: enable fingerprint	Simon Zhou
2023-05-14	mb/google/rex/var/screebo: Add initial devicetree config	Kun Liu
2023-04-16	mb/google/rex: Create screebo variant	Simon Zhou